Sliding doors in the interior of the apartment. Partitions in a studio apartment. Sliding room dividers

Interior partitions are an integral part of the interior in a studio apartment. Such an apartment is a room in which initially there are no partitions at all, its room is limited to only four walls. With the help of partitions in a studio apartment, you can create and separate a kitchen, dining area, living room, as well as a place to work, a sleeping area or a nursery, depending on the wishes and taste of the inhabitants of the studio apartment. All these functional areas of the studio apartment as a whole represent one common space that should be properly zoned and decorated, as well as correctly arranged partitions and furniture in order to make the most of the space of the room, but at the same time not overload it too much. Without partitions, it is impossible to create different zones in a studio apartment, they are very relevant for owners of apartments with such a layout, designers present many stylish and interesting solutions for zoning.

The method of zoning and, subsequently, the entire interior of the studio apartment as a whole will depend on who such living space is intended for: for one person, for a couple or for the whole family. But in any case, the zoning of a studio apartment is inevitable; the number and purpose of functional zones will depend on the number of people living in such an apartment. For zoning, designers suggest using different ways, such as the installation of partitions, walls, bar counters, as well as the creation of a two-level ceiling and floor with a partition between the levels, as well as color zoning.

In addition, for stylish and original zoning using a variety of partitions, it is better to use different materials and their colors for walls and floors in different areas, it is best to make these materials differ in their texture. If you can skillfully distinguish all functional areas in the interior of a small studio, it will be very easy for you to create a cozy atmosphere in the house, you will be able to meet guests and at the same time the bedroom or kitchen will be separated and hidden from prying eyes.

Color zoning

It will be very interesting to look at a two-sided colored partition, which will be framed from different sides in color scheme of the functional area to which it is turned, and a two-sided partition of contrasting colors will look very unusual. It should be noted that this option is quite expensive.

An alternative, more affordable in cost, would be the division of a studio apartment using building materials different colors. The main condition is right choice color combinations. The right combination of colors can help you create a visually larger and more spacious room. With this method of zoning, it is better not to use dark colors, as they will visually reduce the space of your studio apartment.

photos

Partition options

As partitions, you can use both furniture and ordinary Construction Materials installed in the form of a wall, for example, drywall. It is very easy to make a drywall wall with your own hands, since this material is very versatile: it can be easily shaped to the desired shape, it is easily cut, it can be wallpapered, painted or decorated in the way that suits you best.

In addition, the role of partitions can be played by an ordinary bookcase for books, as well as a wall with through shelves on which you can place various decorative elements, for example, figurines, flower pots, frames with family photos or beautiful pictures. It is best to use a shallow closet as a partition so that it is not wide in profile and does not look bulky.

You can divide the functional areas of a studio apartment using any decorative partition, and its decor can be the most diverse: patterns, carvings, as well as more ordinary options - interesting wallpapers with photos, paintings or just bright combinations of contrasting colors.

Some, when separating functional areas, prefer curtains or screens, which looks very nice and gentle, but this option is not suitable for every area. These items are made of fabric and therefore have the property of absorbing odors from the kitchen, so you should not use them to separate the kitchen and living room or kitchen and bedroom. Screens are more suitable for separating the bedroom and any other area, except for the kitchen.

You can also install a partition with an arch in the room, it will add beauty and luxury to your interior. Along such an arch, you can put beautiful curtains. It is best to separate the living and sleeping areas of a studio apartment in this way. There are very unusual options arch partitions are movable partitions. Such divisions can also have a classic rectangular shape.

The main advantage of a portable partition is its mobility. With its help, you can separate different functional areas at any time, when it is convenient and necessary for you. Thus, you can often rearrange and change the interior of the studio in an interesting way. Most often the role mobile partitions perform screens. They can be attached using special devices to walls or to various furniture, thanks to which they are securely fixed and create a new separate functional area.

Sliding

Sliding partitions are the best solution for zoning a studio apartment. This element of the interior can provide good sound insulation of different zones from each other. Such a partition is perfect for separating a children's area or bedroom. It will help at the right time to hide from prying eyes what is needed. In addition, if you have a baby at home, you can close such partitions to provide him with a restful sleep without waking him up with extraneous sounds.

An interesting option would be to install a partition in the form of sliding compartment doors, which can be decorated with images or patterns to your taste. Such doors open almost silently, as they move on wheels on special rails. Such zoning will even allow you to create a separate room in your studio apartment.

For the manufacture of sliding partitions, a combination of wood and glass is most often used. In addition, such a partition can be decorated with a mirror, which will make the interior of the apartment more chic and at the same time visually expand the space of the studio.

The most luxurious model of a sliding partition is a radius partition. Such a model can completely change the appearance of the room, as it introduces smooth lines into the interior of the apartment. Such an interior design becomes very harmonious and cozy. An important feature of such a partition is a curved canvas, consisting of two or more elements. Moreover, these elements can move either independently of each other, or in a cascade manner, when the movement of one sash other sashes also smoothly fold.

Very interesting option is the use of partitions for zoning, which, when opened, fold like an accordion. If you fully open such "doors", then you will free up the space of the studio as much as possible and save it. This is a big advantage of an accordion door over a conventional compartment door. They very conveniently zone the room and take up a minimum amount of space, while decorating the interior. Designers decorate such a sliding partition in the form of an accordion with gold and silver threads, an openwork pattern or interesting images.

Even owners of private houses want to use all the available space as efficiently as possible. Given this, architects, designers and furniture manufacturers are constantly creating ways, methods and solutions for the greatest savings in living space without sacrificing functionality and comfort. One of these solutions was invented in distant Japan sliding doors.

Sliding doors are a door system in which the movable part does not open perpendicularly, but moves along it.

Advantages and disadvantages of sliding doors

Like any interior design solution, sliding interior doors have advantages and disadvantages.

The main advantage, as mentioned earlier, is the ability to significantly save space. Standard Width simple doors varies from 60 to 80 centimeters: this distance reduces the free space of the room into which it opens door leaf. Therefore, the installation of sliding door systems between a narrow corridor and a kitchen or living room is most popular.

The second plus of sliding doors is originality general view rooms in terms of design. As a rule, they are made to order, taking into account individual sizes and wishes regarding color and material of manufacture. On the front of the door, you can place mirror panels, cork boards for illustrations and notes, slate boards for drawing and magnets.

Thirdly, such door systems are often used today for zoning a large room, for example, to separate the dining room from the kitchen or the seating area from the living room. Choosing doors from transparent material, the owners of the house will not even feel the bulkiness of the partition.

However, sliding doors also have a couple of drawbacks. Firstly, the mechanism for sliding doors is more complicated, therefore, the cost is somewhat more expensive than the usual hinges.

If the goal of the owners of the apartment is the most budgetary decoration or redecoration, then it is hardly worth choosing this option.

The second partial drawback is the inevitable slight noise when opening and closing the door. Even the most expensive and thoughtful mechanism will not be absolutely silent. This fact is not an obstacle for every apartment: if the owners have a sound sleep, the sound will not interfere with a comfortable life.

Types of sliding door mechanisms

The classic version of a sliding door is a design, the working surface of which moves along the wall in a straight line and is fixed near it. Such doors can be either single-leaf (a great option for small apartments), as well as bivalve.

Radius doors are a tribute to the modern architectural trend of designing houses with curved walls. The door leaf moves along a circular path, somewhat reminiscent of shower doors. In addition to the role of an interior door, this design is used to create a small separate room inside the room: pantry in the kitchen, dressing room in the bedroom.

Folding interior doors work on the "accordion" principle: narrow strips 10-30 centimeters wide are tightly folded and fixed near one of the jambs. A big advantage of such mechanisms is the possibility of adjusting the width of the passage. In stores there are accordion doors and from two or three wide canvases.

The third type of sliding door system is compartment doors. They not only serve to periodically close the opening in the wall, but also act as this wall at the same time. Similar doors are used to distinguish between the kitchen and the dining room: work zone opened or covered from prying eyes.

Sliding door material

The planned scope of the sliding door influences the choice of material: wood. mdf, glass or plastic.

Wooden doors are installed between the corridor and the living room or sanitary unit: they close tightly enough, do not let in light and unnecessary sounds. The issue of using wooden sliding door systems for a children's room is controversial.

On the one hand, wood is the safest natural material; many types of wood have a beneficial effect on the health and psychological state of a person even after numerous treatments.

On the other hand, solid wood products are quite heavy (compared to plastic, fiberboard or MDF), which increases the risk of injury to children's fingers if the sash is not closed carefully.

However, this drawback can be eliminated: for the sake of safety, you can put a special door closer, or lay a soft material like foam rubber along the end of the door panel.

Wooden doors and other interior elements are good for their stylistic diversity, because with a certain combination of colors and handles, you can redesign the door in any interior style, from white Scandinavian to massive rough loft.

Significantly more budget decision will be an MDF door. The MDF frame is highly resistant to high temperatures. However, this material has a tendency to swell from moisture, so it is highly not recommended to put a door made of this material in a bathroom, restroom or laundry room.

Glass doors are preferably used as a partition in large rooms of private houses or studio apartments. They transmit light, so that the space does not decrease in volume. Exotic lovers can order colored glass panels that will turn the rooms into a riot of colors with enough sunlight.

The main function of glass walls and doors is to let in light without letting in sound. Therefore, glass door systems are often installed in office premises for conference rooms, offices, meeting booths, libraries and rest rooms.

Plastic doors are cheap and light weight, which determines their prevalence among owners of small country houses or rental tenants. As a rule, they are installed only as partitions, for example, to protect children from stairs or from pets.

Today, the simultaneous use of several materials is popular: a wooden door with glass inserts is found in many design projects.

Photos of sliding doors in various interior styles can be found in design blogs or other specialized web resources. It is not difficult to note the trend that high-tech style supporters prefer glass doors, and loft and Scandinavian style prefer wooden doors.

DIY sliding door system

A non-standard mechanism does not mean at all that the installation of sliding doors cannot be done by hand. This will help save money and time when ordering from a door factory, especially if the doorway is of a non-standard shape or size.

The set of necessary fittings for sliding doors consists of the door leaf itself of the required size (width and height of a standard hinged door or a little more), a sliding mechanism, handles, a rail for a door frame and, if desired, a lock. The length of the sliding mechanism is calculated as two door widths, but it is better to buy with a margin, since the mechanism is easily trimmed.

In the existing working part of the door in the center of the lower end, it is necessary to make a groove about 3-4 mm deep. The rollers that enter the sliding mechanism are screwed to the upper end of the door. Then the guide profile is fixed: it should protrude from one edge by about 5-5.5 centimeters.

The height to which the structure must be fixed is calculated based on the height of the door itself, the rollers and the lower gap (depending on floor covering and the possible curvature of the floor, the distance varies from 1 to 2 centimeters). The door frame can be made from an ordinary rail 2 centimeters thick, on the sides of which platbands are subsequently fixed.

Photo of sliding doors

Sliding doors are a rather original design solution, which is distinguished by aesthetic, practical advantages and safe, reliable operation.

Advantages and disadvantages

Main advantages and disadvantages.

Types of interior sliding doors

These products are divided into several varieties.

Double

They have 2 sashes that can move in different or in one direction. The double design allows rational use of free space and is perfect for rooms with any dimensions.

Single

They occupy a minimum of free space, do not clutter up the interior, which makes it possible to equip them with standard or narrow openings in city apartments.

The photo shows sliding single-leaf doors in the living room in a city apartment.

Sliding doors

They are the most requested option. Compartment doors move compactly along the wall, do not take up extra space and can be used in any living space.

The photo shows the interior of the attic room with sliding sliding doors.

Harmonic

It has several segments that move when opening to one or to different edges of the doorway. It can be a folding mechanism, in the form of PVC panels or sashes made of other materials.

The photo shows glazed folding accordion doors in the design of a balcony opening.

Suspended

They are distinguished by the presence of an upper rail, which can be fixed to the ceiling or wall, which allows you to maintain the aesthetics of the floor and its coating.

Rollback

Equipped with a non-threshold system and special wheels, which account for the main weight of the door leaf. In addition, they allow you to add a rigid and reliable foothold to retractable models.

Pencil case doors

Such built-in pencil case doors are conveniently hidden inside the wall without violating the integral interior appearance and are distinguished by a high level of sound insulation.

The photo shows white matte pencil case doors that slide into the wall, located between the kitchen and living room.

french doors

Translucent French sliding products will not only fill the room with light, lightness and sophisticated charm, but also visually expand its boundaries.

tricuspid

They have a truly convenient operation and are especially suitable for decorating a wide opening that has non-standard dimensions.

The photo shows sliding triple doors with frosted glazing in the design of the opening leading to the living room.

What materials are used?

The material from which sliding structures are made is a very important point when choosing.

• Wooden. Door leafs from an array of various tree species are always very relevant. They have a natural and natural appearance and look stylish and expensive.
• Plastic. They have many useful functions, are very convenient and safe to use, have a beautiful appearance and long service life.
• Aluminum. Such steel models are distinguished by good strength characteristics and resistance to external influences.
• Glass. All-glass canvases are considered quite popular. They may have different convenient mechanisms, original handles and other beautiful fittings.
• Combined. They combine different kinds materials such as aluminum, steel, wood or plastic frames and glass, mirror or rattan core.

The choice of material allows you to influence not only the performance of the door model, but also further emphasize the given stylistic direction of the room.

Photo of doors in the interior of rooms

Interesting photos of the design of various premises.

Balcony doors or loggia

With style, ergonomics and a huge variety of designs sliding canvases, it turns out to choose the most suitable option for a balcony opening. Most often, fully glazed models are used for the loggia, which let in natural light well.

To the bathroom

First of all, when equipping a bathroom, it is worth considering it important features. Only high-quality and wear-resistant materials are used here, which are not afraid of moisture, steam and high temperatures.

To the dressing room

Sliding structures can become not only functional, but also very original solution, for both large and compact dressing rooms.

To the living room

Sliding doors will become a truly essential piece of decor in the hall and allow you to create an amazing design in it. In addition, these products can become an effective zoning element for a small living room, for example, combined with an office.

For veranda or terrace

Fully glazed sliding doors with aluminum or wooden frame, create an unobstructed penetration of natural light, create a cozy atmosphere and provide a chic panoramic view.

In the photo there is an exit to the summer veranda, equipped with sliding panoramic doors.

for toilet

For the bathroom, products made of moisture-resistant materials are perfect, which will avoid their deformation for quite a long time. For example, it can be practical plastic or glass doors.

To the bedroom

Such designs are a fairly stylish interior element that becomes the central link of the bedroom and significantly improves its aesthetics.

In the hallway and corridor

In the corridor, there are often canvases with mirror or glass inserts, which make it possible to give a small hallway more lightness and visual spaciousness.

To the kitchen

Sliding models, which have convenient, comfortable placement and saving additional space, can be easily used both for opening an opening in traditional cuisine, and for separating the kitchen area in the studio.

To the nursery

Door products decorated with stickers with cartoon characters, photo printing, various kinds of applications or drawings should not only create colorful design children's, but first of all fully comply with all quality and safety standards.

To the pantry

The storeroom, due to competent design, turns into a harmonious continuation of the overall interior space. In this case, these door leaves are ideal option, allowing you to save space, free up space and avoid clutter.

The photo shows a kitchen with a pantry, decorated with sliding single-leaf doors made of wood.

Varieties of shapes and sizes of doors

There are several main types:

• Large. Due to its solidity, they will give the interior a special impressiveness.
• High. They have excellent performance characteristics and a truly spectacular look, due to which it turns out to turn standard apartment to luxury apartments.
• Arched. They endow the atmosphere with originality and expressiveness and, thanks to smooth and curved lines, soften the geometry of the room, making it look nobler.
• Semicircular. Correct radius designs have a particularly original and unusual look, which adds originality to the design.
• Hidden. Thanks to such a spectacular design technique as an invisible door, you can not only make the atmosphere unique, but also visually unload the space, bringing air, volume and weightlessness into it.

Sliding door colors

Currently, the color range of sliding structures is not limited to certain shades. However, the most popular of them are the following.

White

Elegant and noble white is considered especially popular and provides an opportunity to form a new conceptual design.

gray

Despite its brevity and restraint, grey colour is characterized by a special characteristic and a rich color palette that allows you to create a truly unique interior.

Black

Incredibly stylish, but at the same time ambiguous black shade, will undoubtedly give the atmosphere a luxurious, elegant and slightly glamorous touch.

wenge

Wenge-colored products always have a more massive and solemn look, which is especially advantageous when decorating wide doorways in a room with high ceilings.

Design and decoration of doors between rooms

Design ideas for interior models.

With a mirror

They will give the space majesty, create a bewitching effect and at the same time visually expand its boundaries and give additional light.

stained glass

Thanks to stained glass decoration, it turns out to make any ordinary interior luxurious, and turn a plain door leaf into an art object.

Panoramic

Erase spatial boundaries and fill the atmosphere with lightness, style and sophistication.

Venetian blinds

They are distinguished by a simple and at the same time beautiful and original appearance, as well as due to the lamellas, they allow you to maintain constant air circulation in the room and improve the microclimate.

Barn

They have such a beautiful and presentable appearance that they become the main decorative object of the room, creating interesting visual effects.

With an image

Thanks to sandblasting drawings, painting or photo printing, the space is filled with new bright accents, and sliding doors turn into an original and unusual addition to the interior.

With inserts

Symmetrical, asymmetric or staggered inserts with impact-resistant triplex glass, decorated with patterns, drawings, toning or matting effects, will give the doors a special elegance and uniqueness.

with transom

The transom is a valuable architectural object, which becomes a fairly effective solution in the case of a non-standard doorway.

Examples of sliding doors in various styles

Applications in popular stylistic directions.

Loft

For the industrial style, designs are often chosen from natural wood or rough boards that have an accentuated lively texture or are subjected to an aged effect. It is also appropriate to use attic or barn structures with a rail in the form metal pipes or bands dyed dark gray or black.

The photo shows sliding barn doors made of rough boards in a loft-style bedroom.

Classic

In a classic respectable and aristocratic interior, wooden sliding doors are supposed to have strict lines, a proportional pattern, an underlined design and a prestigious and sophisticated look.

Oriental

Elegant and sophisticated shoji sliding models are a familiar element of Japanese style. They may have decorative grille, frosted glass inserts or be decorated with intricate bright ornaments, hieroglyphs or even embroidery.

Scandinavian

Natural wooden or glass structures with a democratic design, combined with a similar Nordic setting, made in light, such as white, milky, light gray, beige or sky blue tones, will be a harmonious addition to the Scandinavian interior.

Pictured is the living room scandinavian style with sliding hinged doors in wood tone.

Provence

Sliding doors made of natural wood or chipboard, in bleached shades, pure snow-white or pastel colors, products with glass inserts decorated with engraving, lattice, floral patterns or antique-style paneled canvases, will give the Provence-style interior a noble charm.

High tech

Doors with plastic and aluminum profiles, decorated with solid glass or high-gloss inserts, will be particularly in harmony with innovative and high-tech decorative elements.

Options for zoning a room with doors

Mobile sliding structures make it easy to change the current layout of the room and form in it a non-trivial, beautiful and functional interior. With the help of doors of this type, it turns out to separate additional zones or organize the division of the room into compact parts.

The photo shows sliding doors with glass inserts separating kitchen area from the living room.

Such a multifunctional sliding partition is perfect for zoning, both spacious and small room and even for visual adjustment of a narrow and long room.

Niche Sliding Door Ideas

For this recess, you need to embed sliding models designed in accordance with the size of the niche, will be the most optimal solution. Thus, it will be possible to create a functional door structure that will perfectly fulfill the insulating role and at the same time will not take up much space.

The photo shows a bathroom in a niche, decorated with frosted glass sliding doors.

Photo gallery

Sliding doors make the most of their functional purposes, hide the room from prying eyes, create good sound insulation and at the same time absolutely do not clutter up the environment.

It is believed that sliding doors are a novelty among door designs. But this is not true. Many centuries ago, sliding doors were first invented in Japan, which were used as interior partitions in large rooms. That is, it is a very ancient, but still relevant invention. Sliding doors are a very convenient and practical design, which is very popular. Now manufacturers offer a wide selection of such products, so it is important to know how to choose the option that suits you best.

Design features

Sliding doors can have two types of construction, depending on their device:

• parallel-sliding;
• sliding folding.

They are completely different in their way of movement and mechanism. In addition, they are installed completely differently.

So, parallel-sliding models consist of several small wings. They move on rails and rollers. This is very reliable designs which can last for a very long time.

Sliding folding systems have a different device. They always consist of a large number of sections and fold like an accordion. They have a different principle of operation and are completely assembled against one wall during opening. They are great for delimiting different functional areas and for decorating rooms.

Also, all designs include certain components that are an integral element of such a door system.

• So, there are profile guides. Its average length is 1.5-2 m. There is also always a lower guide profile and a set of fasteners.
• For models that move on rollers, wheels are provided. Usually there are quite a lot of them, but the specific number will depend on the length of such a door.
• A very important design element of sliding doors are stoppers. They are necessary in order to limit movement during the movement of the valves. So you can conveniently fix the sash in the desired position.

• The design also includes sashes or door panels, which are the main part of sliding doors. The design has a suspension, a cassette, skids, platbands, extensions, clamps. No door functions without these elements. Most sliding doors have a special bar.

It is necessary in order to hide the entire mobile mechanism, or rather, the rollers. It also closes the profile guides and makes the appearance of the door more presentable. Such strips are called decorating.

Types of mechanisms

The system of sliding partitions consists of several shutters. Most often they are made of an aluminum profile that acts as a frame, and other material for the door leaf. In this case, glass, plastic or other lightweight material is additionally used. The interior partition has a certain mechanism. Such doorway can be moved to the right or left.

A feature of the mechanism of room partitions is that it is very functional and at the same time the doors move completely silently. Such a mechanism is suitable for installation in any room.

Parallel-sliding partitions have several leaves, but can be presented as one wide sliding canvas. The choice of model will depend on your personal preferences. Single-leaf partitions move parallel to the wall or hide inside the wall space. Wall-mounted models are considered the most compact.

Multi-leaf parallel structures have a more complex device. They are also parallel to the wall when opened, but, as a rule, they are presented in the form of three or four door panels. But all these canvases can move independently of each other, separately.

Folding sliding partitions are several panels of the same width. Moreover, designs usually include more than three canvases. In some cases, their number can even reach ten. When you open the door, all the leaves fold on one side of the opening, evenly adjacent to each other. In this position, they can be conveniently fixed.

Manufacturers also present suspended, built-in, hinged, roll-out, drive-in, in-hole, overhead sliding structures.

"Harmonic"

Folding accordion doors are very stylish and functional. They are perfect for those who have cramped and small apartments. They are very compact and take up very little space and move along rails on special rollers.

Door panels are called slats. They gather on the side and fold like blinds. Moreover, it can be not only soft models, but also more dense and reliable wooden and aluminum ones. Accordion doors can be presented in the form of "books". These are slightly different designs with larger door panels. They are somewhat reminiscent of screens.

Usually books have 2 or more large canvases.

"Accordions" allow you to select several different functional areas in the room. Moreover, they can be installed both in rooms decorated in modern styles - Hi-Tech, minimalism, and more classic for decorating rooms. So, there are models for the kitchen, bedroom, nursery. They also equip the entrance to the study, and in this case, glass models are often preferred.

"Accordions" are one of the most inexpensive among all sliding doors. Their cost will vary depending on the design, material of manufacture, as well as their size. Usually they are used for wider doorways, since these structures themselves are quite long.

coupe

Sliding sliding doors are gaining popularity every year. They look more strictly and sustained, compared with accordion doors. They are installed both in the office and at home. Compartment doors also take up very little space, so they are perfect for installation at the exit to a corridor or a small kitchen.

Compartment doors have better sound insulation compared to accordions. That is why they are often installed in the office. Thus, extraneous sounds will not distract you during work. They perfectly save the area in any room. They can be easily assembled by hand. The door leaf can be hidden in the wall after you open the door.

There are also models that are superimposed on the surface of the wall like a panel. This option looks very fashionable and unusual. These designs have two possible uses. So, they can completely replace any swing doors.

In addition, some use compartment doors as wall panels. Their installation does not require the installation of a door frame and thresholds. Therefore, the process will take very little time and effort. It will also make it much easier for you to find the right flooring.

Sliding doors belong to the middle price category. Their cost varies depending on the features of the design and design. The average cost is 8000-10000 rubles.

Pencil case

They got their name due to the fact that outwardly they are very similar to an ordinary school pencil case. They are very compact, so they also save space in the room. Manufacturers offer a huge number of different models in design and configuration, so they can be selected for any type of room and doorway.

They are very dense and completely do not let in noise, extraneous sounds, so they can also be installed in office premises. This is due to the peculiarity of the method of their fastening, which distinguishes them from other similar sliding models. In addition, they move a little differently along the wall.

As a rule, sliding pencil cases have glass inserts and unusual patterns and interesting design and therefore are in high demand. They move completely silently and therefore do not distract people in the room. The design feature is the obligatory presence of a closer, which also ensures smooth movements. They are the most compact among all sliding models.

Portal

Portal structures are most often made of plastic. This is a very stylish and unusual design solution. It allows you to play with the light in the room and skillfully save space by visually expanding it. It's pretty original and unusual solutions, which can diversify any interior. Most often they are used to fill doorways of great height and wide in size.

Door leaves are hung on hinges. The frame inside has slats along which the panels move. When you open the door, the hinges unfold and the sash goes inside the room. The hinges, together with the sash, move along the rails along the wall.

Such doors can be fixed in any position, which is an undoubted advantage of this design. When you close such a door, the hinges are folded, and the door leaf returns to its original place.

Canvas types

All door leafs differ depending on the number of leaves. The dimensions of the door leaf also play an important role. The most common and classic are single-leaf sliding models. As a rule, they are purchased for narrow spaces. These are quite compact models that move sideways and take up very little space in any room.

To install single-leaf sliding doors, there is no need to install a door frame. But for this you need to make a high-quality doorway. Single-leaf canvases are fixed to the bottom of the doorway. There are also models with a top rail.

Another common option is double-leaf interior doors. They are suitable for fairly large doorways. These are very stylish and functional designs that perfectly perform decorative functions. As a rule, double-leaf models are installed in large rooms.

They consist of two identical canvases. You can fix one canvas and use the other, or simultaneously push both canvases when entering and leaving the room.

There are even tricuspid models, which are often installed as an interior partition. They can also be presented in the form of a screen. They look more massive than double models.

The more panels in a sliding door, the smaller the size of the door leaf. But there are also quite large models with a wide door leaf. These include radius structures, in which the canvases are arranged in a circle and move along rails. It can be accordion models, and ordinary sliding folding doors. Also popular are semicircular and telescopic canvases, as well as cascading models with a lattice.

The doors that are installed at the entrance to the room have different size. The average door leaf is 1 m wide, wider entrance structures can be up to 2 m in size. The standard height is also 2 m. But in case you have higher or lower ceilings, as well as wider or narrower doorways, you can make a sliding door to order, based on certain parameters.

Manufacturing materials

Sliding doors are made from a wide variety of materials:

• Such models can have wood frames or be completely made of wood. Solid door products are very reliable and quite large. This material is also reflected in their price.
• Models from fiberboard, chipboard are considered cheaper. Such doors include wood and other synthetic connecting components. They are also completely eco-friendly, but have a lighter weight compared to wood. This design is easier and quieter to move along the guides.
• Veneer products are also very popular. Outwardly, they completely repeat models from solid wood. Inside, they have a different, lighter unnatural filling.
• Plywood models are quite light and durable. They are very often installed in doorways at the entrance to the room. Models from MDF serve for quite a long time.

• The most unreliable are sliding doors made of drywall. They are light in weight, but very short-lived. Most often they play the role decorative partitions or screen.
• Reliable are aluminum structures that have glass or mirror inserts. As a rule, the role of the base in them is played by an aluminum profile. It securely holds such, at first glance, a fragile structure.
• Glass doors look very luxurious and elegant. They fill the room with lightness and light. Tempered glass is used to create such structures. They are quite heavy and large, but they are very difficult to break. This is due to their thickness and quality of such products.

Also, glass doors can have a wooden door frame. It is these models that are the most reliable. They are able to create excellent sound insulation. Sliding doors are also made of polycarbonate.

• Iron sliding doors are considered quite reliable and massive. They are installed most often at the entrance to the room. Accessories for sliding doors are also very often made of iron.
• On wooden models can be installed wooden handles. All furniture fittings in this case must be of high quality. It must be securely attached to door structure.

Functions

Interior sliding doors should perform not only the function of limiting the entrance to the room, but also solve many other problems. So, models with sound insulation are very popular. They allow you to close in the room and get rid of extraneous sounds. Such structures are often installed in office premises or workrooms, since extraneous sounds in this case can interfere with work.

In this plan good option are sealed doors. They not only create sound insulation, but also do not let smells through at all. Such structures are often installed in the kitchen in order to prevent impregnation of the upholstery. upholstered furniture odors that may come from the kitchen.

Insulated doors do not release air from the room. They are often installed in bathrooms and toilets. They are great for baths and more. water procedures and perfectly retain heat inside the room.

In addition to installation at the entrance to the room, sliding models are also used for space zoning. It can be sliding partitions or radius structures. This feature is very important for owners of studio apartments. Sliding partitions allow you to divide the room into several functional areas and limit them from each other.

Advantages and disadvantages

Sliding doors are rather controversial designs, as they have both disadvantages and advantages:

• Their main advantage is their versatility. They can be installed in absolutely any room, regardless of its purpose. They can be mounted not only at home, but also on the street and even in shopping centers.
• The big advantage is the presence of the function of automatic opening and closing of doors. This innovative technology which makes life easier. Such doors, as you know, have a side-sliding design. That is why they do not react in any way to drafts or gusts of wind. They won't close on their own and won't move. There is also a convenient latch for this, which allows you to fix the door in a convenient position.
• Another advantage is no noise when closing and opening the door, which cannot be said about flapping swing models. They are also light in weight, so they move easily on rails. Cope with such a door can even Small child. The big advantage is that such doors can save space. You will not need to provide a place for plowing when you make repairs.

Some swing structures furniture fittings spoil the adjacent walls, but there are no such problems with sliding models.

These doors are completely safe and very convenient. So, during the opening, you will not hit anyone by unexpectedly entering the room. So you protect your children and pets, because the sash opens not backwards, but sideways.

But despite all these advantages, the design has a number of disadvantages:

• So, by themselves, these doors do not provide for the installation of mortise locks. Therefore, if you want the door to be locked, you will need to use a different design.
• Another disadvantage is that these doors cannot provide a high level of thermal insulation comparable to classic models. That is why such products are more often installed indoors than at the entrance to the house from the street. They also provide less sound insulation.
• For housewives, a significant disadvantage is that the niche into which the sliding structure is recessed collects a lot of dust. And it's pretty hard-to-reach places, cleaning here is difficult.
• There is also the possibility that at one point the sliding door will jam. Especially this probability increases if the rollers squint. That is why it is necessary to select a model only with the highest quality mechanism and periodically check its serviceability.

How to put?

Sliding doors are quite easy to assemble yourself. Assembly will not take much time. This can be done using a simple scheme, but initially you need to prepare:

• First of all, you need to take all the necessary measurements to determine the size of the leaf of such a door. Moreover, to all measurements you need to add about 5-7 cm.
• You can buy ready-made canvases for your measurements, this will greatly simplify the work.
• When you have made all the necessary measurements, you need to draw lines that will mark the future door.
• To the top line you need to attach wooden beam, and its lower part should be slightly higher. The length of such a beam will be equal to twice the width of the opening. It must be fixed with a self-tapping screw.
• After that, you need to fix the profile. He will act as guides. This must be done in such a way that the sash and wall together form a free space. This is necessary so that subsequently the door slides quietly along the wall. The profile should be perfectly straight and located in a straight line.
• Then you should come to the collection of carriages. Once they are assembled, you will need to test how smoothly the canvas moves. When assembling, the carriages are separately inserted into a pre-assembled profile and moved.

• Don't forget to install movement limiters and a sealant. They need to be placed along the edges of the profile.
• Then in the door leaf you need to make a mount for the carriage. It should be located in the center. After you install all the fasteners, you can install the door leaf. It needs to be tightly put in profile and slightly raised.
• After that, it is necessary to fix the brackets to the bolts with nuts. But try not to overtighten them.
• Then you should insert the door leaf into the lower rails. But before that, you need to loosen the bolts on the carriage.
• After that, it is necessary to hide the profile with decorative platbands. Don't fasten them too tight. After that, you can proceed to the installation of accessories.

How to install a sliding interior door, see the following video.

When choosing sliding doors, you should pay attention not only to their appearance, but also to the characteristics:

• Plays a very important role soundproofing, since it is this quality that is lagging behind in this type of door. Worst of all, pine models are saved from extraneous noise.
• Pay attention to the material. It is better to purchase only natural products that meet all standards, as they are the most environmentally friendly. Try not to save money on such products, because in this way you can shorten their life.

• The door must harmoniously fit into the interior the room where you plan to install it. Doors at the entrance to the living room should be the most luxurious and massive. Sliding doors to the hall can be purchased from solid wood, especially attention should be paid to products made of larch and ash. In the hallway, in the corridor and in the pantry, it is better to install denser opaque models.
• But if you want to fill the corridor with light, then you can choose glass model. It can visually expand a narrow corridor. The glass door is perfect for the kitchen and goes well with small household appliances. When choosing such doors, also consider wall coverings.

If you want to install sliding doors in one-room apartment, try to get the same designs so that they create a harmonious ensemble. Also in the kit for such a door you need to choose the most suitable and reliable fittings.

Design options in the interior

The door in any room is one of the most basic elements. It should complement the interior of the room:

• In some small apartments, doors are even installed instead of a wall. This option is also suitable for zoning, so this door will play the main role.
• If you are installing the design in a room decorated in a classic style, it is better to purchase elite matte models. Gloss is unacceptable for halls and living rooms. For such rooms are best suited large white internal doors with luxurious decor.

• If you want to install a door on a loggia, then panoramic models are perfect for you. In this case, you can give preference to designs in the form of a mosquito net. They are perfect for the warm season of the year. You can also use lattice doors.
• It is better to install beautiful elegant models in the bedroom. It can be glass opaque products that reflect the classics. For wide and spacious rooms, decorated in a modern style, you can purchase frameless transparent doors. This is a great solution for a minimalist style.
• Soft sliding screen doors are suitable for the dressing room. You can also use models with a mirror. Reviews show that they are very comfortable in such a room. The description of such options in the interior is always enthusiastic.

In the design of sliding models, framing plays an important role. Frameless models look more simple and modern. And products with frames are more luxurious. In this case, you can give preference to models with a wooden frame in the color of wenge.

Recently, in addition to traditional swing doors, which are familiar and understandable to the consumer, in everyday life you can increasingly see such non-standard option like sliding interior doors. They are increasingly installed in different rooms- for example, when zoning or for special allocation of a certain part of the usable area.

Since sliding models look beautiful and cozy in any place (they can even be used for the pool and bathroom), you can think about how to install them in your own home.

Advantages and disadvantages

Of the main advantages of sliding interior doors, it should be noted significant space savings, external beauty, accuracy, aesthetics and ease of use. Since the mechanism implies easy walking of the valves along the guides, it is very easy and convenient to open and close such models.

However, when installing a simple sliding structure, the owner should take note of the fact that it will not be able to provide the room with full sound insulation - except perhaps when installed behind a false wall, if we are talking about inexpensive options.

Sliding doors can keep warm, but much worse than ordinary ones, so you should not install them in the corridor or hallway as entrance doors.

The mechanism itself and the installation of sliding doors are not cheap, if you want to insulate them, or provide a decent soundproofing effect, you will have to spend a lot of money, but in many cases it justifies itself.

Design, device and accessories

The principle of operation of such systems has two varieties.

• There are parallel sliding models that include more than one leaf. In this case, the door leaf moves parallel to the vertical surface. If soundproofing properties are important for the buyer, it is recommended to install this type of construction. In addition to such a reliable and monolithic model, there is an even lighter type of door, which is called folding and sliding. It consists of a certain number of canvases, which, according to appearance very similar to an accordion.

Such a model will not give sound insulation, but it is she who is the most optimal for space zoning (for example, in a one-room apartment).

• More simple folding and sliding system often comes with top rail only. The weight of such a design can be considerable, especially if the canvas is made of polycarbonate or glass, so you should stock up on reliable high-quality fittings in advance.

The standard set of interior doors usually includes the following items:

• guide skids (or lower and upper profiles), the length of each of them is 2000 cm;
• canvases, they must be securely fixed on rails and rollers, so a certain number of them must be included in the kit. It can be different and depends on the type of door structure;
• fasteners;
• suspension, the required number of extensions and trim - usually with a margin;

• ready-made door panels or sashes (either "accordion" or classic, monolithic models);
• decorating bar to hide the mechanism on rollers, with entry in a box or in a box;
• limiters-stops;
• latch and cassette (several pieces) - in order to hold the sashes in the desired position when they are in open position;
• handle and lock with the possibility of embedding in the door leaf.

Depending on the type of model, internal sliding doors can be with or without threshold. Also, many manufacturers offer to purchase additional accessories. For example, a mosquito net, if it is planned to install a sliding system on the terrace, and those customers who dream of insulated doors can be offered a special seal.

System types

Like other door systems, sliding ones are also divided into several types based on how they open and close: canvases are folding, retractable and sliding.

• Rollback (or rollback) systems. Usually they look like a canvas with one sash, for the movement of which special suspension profiles are attached, moreover, in one direction or the other. The width of the structure for doorways is no more than 900 mm. This is an overhead model with overhead view fastening mechanism - according to the height, which in total is the height of the rollers and the gap during installation.

• Sliding (or sliding) models have similarities in the principle of installation with retractable structures. Such doors can move in different directions, as well as by opening each leaf in turn. If desired, you can equip such a model according to the action of the chain mechanism for opening it, as in wardrobes: if one sash moves, the other automatically follows it.
• Folding or collapsible- the very "accordion", which is most often used as a partition door or screen door, separates the necessary space in the room. They open in the same way as the previous systems, moving along a special profile guide with a roller mechanism. The difference from other models lies in the fact that their canvases are not sliding, but folding, consisting of several lamellas. They are folded in a one-sided way, with the help of loops. The main advantage of the "accordion" is that it is very compact, but the handling of such a door should be as accurate as possible.

• If the owner wants to give the doors additional noise and sound insulation, they can be installed with a vestibule. In this case, the canvas will be even more silent and airtight. Also, for maximum convenience and ease of installation and operation, sliding models with telescopic mechanisms are often installed: the sash moves only in one direction, which can be especially convenient in rooms with a non-standard layout.

What are the types

Sliding doors with one leaf are installed in small apartments not only to save space, but also to make the interior look cozy and neat. Installation is very simple, it does not require the installation of a door frame, however, the opening itself will need to be strengthened and a good finish should be carried out.

Such models are attached to both walls and ceilings - the accessories included in the package provide for one or another type of fastening. As a rule, the design itself is quite light, often single-leaf panels are frameless, vertically sliding. Also recently, the lattice door has become very popular in Japanese style. It perfectly zones the room and, at the same time, decorates it.

double leaf

Internal double-leaf interior structures are mounted in wide openings, they are distinguished by functionality and ease of use. Ideally look in rooms with a large area, performing also a decorative role. They consist of two panels, which, based on the possibilities of installation, can simply move along the walls, or be retractable into the wall, hidden when opened. One half of the panel is easily stopped by a latch so that it does not interfere, while you can use the other.

The fixed canvas will be beneficial to hide the room, and the running canvas will perform the main function.

tricuspid

Three-leaf doors are very convenient in operation and are installed if there are wide openings of non-standard sizes in the room. Three sashes successfully block any opening, and for profitable zoning, you do not need to build an additional wall. Thanks to the installation of the opening mechanism at the top, the space acquires visual integrity. The undoubted advantage of three-leaf models is that there is absolutely no need to install floor rails here.

tricuspid sliding options often made according to the principle of cascading canvases, each of which has its own rail. When they open, they overlap each other, and it looks very beautiful. The sashes are installed differently: for example, one of them stands in the center and moves in different directions, going in turn behind the other two, which are permanently mounted. At the request of the customer, it can be done exactly the opposite: the side doors move, and the middle fixed canvas can perform a panoramic function of decorating the room, it often has a drawing or a beautiful stained-glass window.

Pencil case

A pencil case is a very interesting and useful kind of sliding design. It got its name based on the technical features in operation. Roll-out canvases with sound insulation move along the walls according to the principle of a school pencil case. They are universal in that they are successfully used in a variety of premises, from offices to residential. The case door takes up little space, and its design and equipment can be assembled and formed at the request of the customer.

Semicircular radius

semicircular radius doors represent the original and, perhaps, the most beautiful and aesthetic invention of design minds. This is a large and wide construction of a convex plan, often glazed, with certain types of decor on the panels. This swing-out model, unfortunately, is not designed to be installed in small spaces. Its main purpose is to give comfort and beauty to large areas of supermarkets, large country houses, offices and apartments with high ceilings.

Intra-hole

Functional interior doors are a model with elements built into the opening, which provides both aesthetics and additional benefits. The leaves move towards each other along the opposite guide, while ½ of the doorway remains free for entry and exit. Moreover, the location of the opening itself can be changed at will.

"Accordions"

Sliding partition doors can be made in the form of a light accordion made of plywood or plastic. There are whole systems of internal partitions, including corner ones, the number of panels in which can vary from two or more. To give the structure special strength, aluminum is most often used as a material, and the doors themselves can have glass inserts, or made from any other transparent material.

The multi-leaf interior partition works on the principle of moving the opening to the left or right. Their sliding system is absolutely silent and soft, and the closer allows you to close them as tightly as possible.

Lift-sliding HS-portal

Lift-sliding models of the HS-portal type include movable and deaf canvases. They are designed to close large doorways. It is this portal design that can provide a completely open space, devoid of both canvases protruding from the wall and uncomfortable vertical racks, which are often indispensable when installing three or more panels.

Thanks to the principle of the portal, you can completely remove the boundaries between the rooms at any time, turning the room and the terrace into one, and if necessary, close the doors back. Such designs can be warm and even double, to ensure the preservation of heat in cold weather. winter time. It is very easy to manage such shutters, despite the fact that they can weigh 300 kg or more.

Dimensions

In accordance with the GOST standard in Russia, the optimal height of the door panel is 2000 cm, and the width of models with one leaf is from 600 to 900 mm. Most of the manufacturers are trying to produce their products with a focus on these indicators, so choosing the right kit is not difficult. The advantage of standardization can also be called a lower price for such a set of paintings and fittings, however, given that in the vast majority of cases strict dimensions are not adhered to during construction, you still have to order doors according to individual sizes.

Large doorways, typical for hypermarkets and large private mansions, have non-standard sizes, for the removal of which it would be best to invite a specialist so as not to be mistaken. If non-standard wide doors are ordered, it is important to take into account the gap so that the leaf opens and closes well, while the width of the leaf itself must correspond to the dimensions of the side walls.

Custom designs can be different: light or heavy. Usually a large weight and thickness of the canvases is not a problem, because the control mechanism allows you to minimize the technical side. All doors original form(light arches for narrow passages in utility room, large canvases with transoms, as well as all bay windows) are made only individually, and the price for such an order will be much higher.

materials

Various materials are used in the production of sliding doors.

metal

Different variants interior partitions for government and medical institutions are often aluminum or iron.

As a rule, such a design does not look too heavy and has good strength indicators. Aluminum and iron are well resistant to external weather conditions. Aluminum partitions are often used for glazing loggias and balconies. The soundproofing properties of these materials are quite high, and if you use a good sealant, it will provide both heat preservation and sound insulation at a high level.

The service life of aluminum partitions is 50 years or more. Perhaps over time they will need a new cosmetic coloring.

Wooden

Wooden products or canvases from different arrays will never go out of fashion, and a sliding structure made from natural materials will always look both rich and stylish, especially in the living room or in the hall. Such models open up space for craftsmen to be creative as woodcarving and creating different kind doors: from deaf frameless to models with figured glazing.

Natural wood is an environmentally friendly and durable material, provided that it is carefully cared for.

However, sliding structures of this type are very heavy, so you should definitely remember that the fittings selected for them must be of the highest quality and with increased strength indicators.

Of course, if you plan to install it wooden doors, it is important to properly care for them so that they do not darken and crack prematurely due to temperature changes and a sharp change in weather conditions. You should first consult with experts about what care products for wooden products should be used.

MDF

The most common and inexpensive material, from which you can also make a good sliding structure, is a fine fraction of wood or MDF. In terms of environmental performance, it is not inferior to natural wood, and its surface can also be decorated. different drawings and applications.

The advantage of MDF panels is that, unlike wood, they weigh very little, and therefore there is no need to purchase expensive and reinforced fittings.

Of course, the service life of such doors is much less, but with careful operation, this option may become acceptable.

To give the panels additional beauty and create the effect of expanding space, mirror inserts can be embedded in them. various shapes and magnitude. It looks very nice and attractive, but it also requires a strong mechanism and reinforced fittings due to the fact that the mirror inserts have extra weight. As for more simple models sliding doors, if desired, you can independently make an interior partition from drywall or veneer, sanding it “antique” or painting it in the desired color.

Colors

Thanks to modern technologies, the color scheme of any design, including sliding, has no strict restrictions. Depending on the material used, you can choose a product for every taste and color.

The main thing is that it is combined in scale with the main elements of the interior, and the overall picture looks harmonious and holistic.

White color is relevant for aluminum partitions, often used in medical offices, but if it is painted with sliding wood panels leading to the bedroom of an apartment building, the effect will be very gentle and “homely”. Of course, if you plan to install panels white color, it is important to make sure that the whole space around, from wallpaper to furniture, breathes lightness and romance.

Wenge-colored sliding structures will always look massive and solemn, especially if the doorways are wide, and high windows and ceilings prevail in the room. This color is best used in large rooms where there are already large pieces of furniture designed in a classic style.

Styles

As you know, the belonging of doors to a particular style most often determines the nature of the material from which they are made.

• Massive blind panels made of natural wood in dark shades can be safely attributed to "classics". Classic style, despite its severity and not always obvious affordability, will never go out of fashion and for many years will delight its owners with the severity of lines and sliding interior models that have “adapted” to its elements.
• Discreet modern high-tech style involves the use of glass doors in combination with inexpensive polymers or metal. Also, eco-doors made of bamboo, upholstered in leather or leatherette, will organically fit into what is called the trends of our time.
• If you use such a versatile and lightweight material as MDF for the manufacture of panels, you can make great option, seasoned V mediterranean scale.

• Traditionally, and for a very long time, Japan is considered the first country in which sliding doors were once invented, so there is a so-called "Japanese style decoration of the room, reminiscent of where such a convenient and functional invention came from. Sliding interior options in the Japanese style, they can be lattice, matte, decorated with intricate bright ornaments in the form of mythological animals and even embroidery.

Design

As regards modern design solutions, if the very first sliding models sometimes looked artisanal and primitive, now this has long been gone, thanks to the development modern technologies production and bold and functional inventions of designers.

The style of the room must be determined even before the door kit with all the necessary fittings is purchased.

Opportunity individual order will always help in the best possible way to determine the style and technical features to be taken into account during installation.

For the manufacture of classic interior doors, any wood material can be suitable - the question is how the owner of the premises wishes to “staff” the doorways. If the area of ​​\u200b\u200bthe room allows, conventional swing models can also be partially installed, and in places where the area is limited, a sliding structure can also be installed.

In large private houses, sliding models are most often installed in the kitchen. They are made of durable glass, which ensures both ease of operation and ease of maintenance. Also, glass models are used in office premises - for the same reason as in kitchens: ease of care, practicality and, not least, additional penetration of natural light - in working conditions for employees it is always necessary. Glasses with a matte finish and unpretentious patterns will decorate any room: from the office to the home kitchen, and the impact resistance of modern glass will ensure such options for the longest possible life.

A door with a mirror will not only visually increase the space of the room, but will also be the best solution to the problem if the room is small and it is impossible to install a separate mirror in it for one reason or another. In addition, a large mirror takes up a lot of space, and a small one often does not bring much benefit if a person needs to see himself completely from head to toe.

It is in this situation that you can mount a large mirror panel in a sliding sash, be sure to provide the necessary clearance so that the mirror surface is not damaged or scratched during its constant movement.

Mirror inserts can also be used simply as a decor. For example, MDF panels make it possible to slightly weight the structure without harming the supporting mechanism. For owners prone to mysticism and Mediterranean motifs, you can always offer a stained glass design of the front fixed panel of wide three-leaf doors. Modern stained glass decorations are made of durable materials, they do not fade in the sun and do not make the structure heavier, and when they are made by qualified craftsmen, they sometimes look no worse than the old ones.

Beautiful model options in the interior of the living room

Of course, when it comes to installing doors in a large private house, there are rarely problems with the concepts of beauty and functionality. As for small spaces, installation options for sliding interior structures in this case seem to be the most popular among ordinary buyers.

If in the "Khrushchev" there is a recess in the form of a niche, the best option there will be doors that enter the niche on skids designed in accordance with the dimensions of the recess. When installing doors made of lightweight polycarbonate into the pantry, a functional partition will be created with an insulating role assigned to it.

In addition, the “Khrushchev” can also be decorated with an interior durable “accordion”, which will not take up much space, unlike a swing door, and the passage to the kitchen will always be free.

different models interior partitions, many of which can be made independently, will help to optimally organize the space of a children's room, in which both a boy and a girl can live at the same time. With the help of such a partition you get two small but full-fledged bedrooms.

If a person lives in a one-room apartment, in which it is not possible to build a full-fledged dressing room with a place for changing clothes, the partition can also play a “saving” role, allocating a certain part of the room for this.

When living in a studio apartment combined with a kitchen, a high screen will become a universal separator that will not only prevent the spread of odors throughout the room, but will also hide dirty dishes and other unsightly things in the form of garbage and food waste from guests.

Thus, sliding interior doors can be installed not only in big houses and offices. Since now there is a great opportunity to manufacture and install them individually, such a convenient design can be fully adapted to the needs of the economy class.

How to install sliding doors yourself, see the video below.