DIY tulle chandelier. Original do-it-yourself chandeliers: ideas for lighting fixtures, detailed instructions with photos. Lamps in different rooms

Interior design is incomplete without lighting design. The right light fixture can completely transform a room. To show your individuality and creative inclinations, try to make a chandelier with your own hands. There are no restrictions on the choice of materials. Get inspired by the ideas of handmade lamps in different styles, three detailed master classes will help to make a unique piece of decor with your own hands. And tips on connection and installation will help with installation.

The first step is to decide on the material that you will use as a basis:

• old chandelier;
• all kinds of rings, hoops, frames - for the frame;
• elementary paper lampshade;
• natural materials;
• other.

The easiest way is to use the old unnecessary chandelier which has already served its purpose. Such restoration will help to look at this rarity in a completely new way and extend the life of the lamp. There is a clear advantage in using old frames: the main elements, such as the frame, fastening and the entire electrical part, are already ready. You just have to deal with design, without thinking about any technical points.

The rest of the materials will require more attention to the connection of wires and cartridges. Homemade chandeliers and lamps on a flat round or other shaped frame can be of any size, made in different styles and techniques. The manufacturing principle is simple: various decorative elements are attached to the frame along the perimeter: beads, fringe, paper and cardboard figures and various unusual things. It turns out effectively.

Another easy way to make a DIY chandelier is to use a paper lampshade that you can buy at the store. Lampshades come in different sizes and colors, you need to choose in accordance with your idea. You can use several identical lampshades to create one lamp - fantasy will be where to roam.

A paper lampshade costs a penny, and there are hundreds of ideas for its reincarnation!

The use of natural materials has become a new trend in interior design. creative ideas with the use of branches, roots, cones and other improvised means are becoming more popular and find a place in different design styles.

An ordinary branch in skillful hands turns into a lamp in scandinavian style

If there is no suitable frame, you can always take a coil of wire and make a base for a chandelier of the desired shape from it. Another option is not to use the frame at all, replacing it with a balloon for a while.

Video: do-it-yourself chandelier-ball of threads

What chandeliers can be made with your own hands

You need to choose ideas for creating a lamp on the ceiling, depending on what style you have chosen to decorate your home. Approach the issue responsibly, look at the photo of the original hand-made chandeliers, and choose the lamp that you like the most suitable for your interior.

Homemade lamp in boho style

The now popular boho style is the most suitable for hand-made lovers. This is a free style that is distinguished by a variety of materials, colors, textures and shapes. In such an interior, everything is possible, and the chandelier should be its highlight.

Artificial flowers will decorate any craft

A little fringe and hot glue - fresh and original

Fringe is a favorite element of boho lovers. When creating a chandelier with your own hands, this material will come in handy. Moreover, all kinds of braid with fringe are found on sale, which further simplifies the process.

In order to make a boho ceiling lamp, take a few rings. different sizes, connect them in decreasing order and decorate each with a braid. The original chandelier is ready, it remains to fix the cartridge with a wire.

Alternatively, instead of a ready-made factory fringe, you can use colorful or plain ribbons, ribbons and threads. It will take a little longer to tinker, but as a result you will get one-of-a-kind homemade chandeliers.

Even old T-shirts and dresses cut into strips are suitable as a braid.

Retro and vintage

In the interior vintage style homemade chandeliers and lamps fit quite organically. Most suitable option in this case - a converted chandelier "of those times". It can be found in your grandmother's house or at a flea market for a penny. The main thing is that the device works. But even if it does not work - it does not matter, you can always fix it.

For a vintage lamp, such decorative ornaments are suitable:

• crystals;
• beads;
• lace;
• feathers.

Remove the old shades and decorate the frame with the prepared plastic crystals.

Important! To make the picture whole, use old-style light bulbs - depicting candles. A retro chandelier will lose its charm if spiral housekeepers are screwed into cartridges.

A fringe with feathers glued onto a paper round lampshade around the perimeter will turn the lamp into something weightless and airy. Such a handmade chandelier for a vintage-style home will become the center of the composition. Start gluing from the bottom tier, gradually rising up. Your task is to hide the attachment points with the next layer of feathers.

Such a lampshade is suitable for both retro interiors and modern design Houses

Another essential attribute is lace. But how to make a lace chandelier with your own hands? A balloon, PVA glue and grandmother's lace napkins come to the rescue. If you know how to crochet, you can make some lace doilies specifically for this purpose.

Take a few knitted elements, soak them abundantly with PVA glue. Do not worry, after drying, the glue will become transparent and will not be noticeable. Take a balloon of the desired shape and size. Lubricate the surface of the ball with a fat cream or oil and carefully glue the napkins.

Your ceiling can be in the shape of a ball, then you need to start gluing from the bottom. The central element of the first napkin should be strictly in the center of the lamp. If you need a slightly open ceiling, you should start with the side surfaces.

After the glue has completely dried, air must be released from the ball. Remove the ball and the ceiling is ready.

The idea is ridiculously simple, but how effective!

Experiments with lamps in the nursery

Often, when making repairs in the nursery, parents cannot choose a chandelier that the child would like and look good in the interior. If you find yourself in this situation, learn how to make a DIY chandelier and create the light fixture your child dreams of.

Many girls dream of a room that looks like a fairy or princess bedroom. A magical chandelier made of rose petals floating in the air will be a good addition to a fabulous nursery. Use an old ceiling lamp as a base or make a steel wire frame.

As a decor, ready-made petals of artificial roses, which can be found on sale, are suitable. Another option is to make the petals with your own hands. You will need thin fabric for this. desired color, which will not crumble at the edges. Of the tools, scissors and a needle and thread are enough.

Cut round petals according to the prepared template. Connect them with a thread to make garlands. Attach the resulting threads to the frame around the entire perimeter. In the center of the frame, make a wire base for the cartridge and a suspension for mounting on the ceiling.

This chandelier is as light as a ballerina and as delicate as a feather.

If you have a glue gun, making your own lamps will not be a problem. A cool idea for a nursery is a colorful chandelier made from plastic cups. Glasses should be made of durable and transparent plastic. These are often found in the party departments next to balloons and caps.

The work on connecting the elements is quite scrupulous. Start from the middle. Choose the diameter and connect the desired number of cups around the circumference. Cast on rows one by one until you reach the top of the lampshade. Then turn the piece over and repeat on the other side. The bottom of each glass should face the center of the sphere. In the middle there will be a fairly large space where you can easily put a light bulb.

DIY children's lampshade - everything is very simple

Ideas for simple lamps for a couple of dollars

A very simple, but at the same time cute idea is a plywood night lamp. The choice of form is limited only by your imagination. A plywood figure is attached at a short distance from the ceiling or wall, and behind it is a light bulb. The result is a muted diffuse glow around a dark silhouette.

A popular option is the cloud. Cut out a cloud from plywood or chipboard; for a beautiful composition, you can make a few more reduced clouds. Color the clouds in White color acrylic non-toxic paint. Attach metal elements in the shape of the letter "P" to the cloud on the back side. Pull out the wires and connect the cartridge. Then screw your cloud to the wall, hiding the wiring and light bulb behind it.

You can make such a chandelier-night light with your own hands in just a couple of hours.

IMPORTANT! Please note that any homemade chandeliers can only be used with those types of light bulbs that do not heat up during operation. Diode bulbs work best. They do not heat up, shine brightly and consume little electricity. In addition, a variety of shapes allows you to choose a light bulb even for the most original lamp.

A simple and traditional way is a cylinder lampshade. These are often found on old floor lamps. From two identical circles form the upper and lower edges of the ceiling. A fabric or paper is stretched between them. Depending on the color and the presence of a print, the same chandelier model can be presented in completely different styles - from ethnic motifs to minimalism.

Such a lampshade can even be made from a piece of wallpaper

A simple but effective idea is a spider chandelier (photo below). Its zest is in long wires that are not hidden anywhere, but on the contrary, serve as decoration for the ceiling. They resemble the long legs of a spider, which is why this model is so named. A cartridge is connected to each wire, and a light bulb is screwed into it. The wires spread along the ceiling in all directions, are attached at the anchor points and hang down. Bold and extraordinary, very simple to perform.

The lamp really resembles a large spider with thin legs.

The most original ideas for the brave

In principle, to make chandeliers for the home with your own hands, you can use any object without exaggeration as a basis. Turn on the imagination, and you will understand that any thing can be creatively beaten.

Old wooden clothespins? Why not an idea for a homemade lamp! The principle is the same: frame, decor, cartridge mount, fixation on the ceiling. The result will exceed your expectations. Such a chandelier will decorate the interior in a loft style. Looks very original.

Wooden clothespins - stylish and eco-friendly

A skein of thread and a flower basket? Wonderful! Don't be afraid to experiment. Cut the threads and tie them to the top edge of the basket. Tie a knot from below, straighten the drapery a little, decorate with beads to your taste and attach to the ceiling, where the wiring has already been brought out and the light bulbs have been connected.

Everything ingenious is simple, and this idea is proof of that.

Pompoms, origami figurines, Christmas decorations, beads, crockery, tea set, cutlery, CDs, all kinds of scraps, scraps - if you wish, you can transform this trash into a breathtaking lamp.

Chandelier making step by step tutorial

For those who want to try to make chandeliers with their own hands, we offer original ideas And step by step guide. The most popular and successful lamp ideas are discussed in more detail. If you follow the recommendations and make a little effort, it will turn out the same as in the photo, or maybe even better.

Chandelier from plastic bottles

Some people think that used plastic bottles should go to a landfill, or at least to a recycling plant. recycling raw materials. But some needlewomen do not think so. Lampshades of incredible beauty are made from ordinary green, brown and transparent bottles from drinks.

Fantastic lamp you can do it yourself

Such a chandelier made of plastic bottles in the form of leaves can also settle in your home. To do this, collect necessary materials and tools:

• bottles of several colors;
• scissors;
• thin wire;
• awl;
• soldering iron;
• wires;
• cartridge;
• switch.

Tools and materials

Instructions for the manufacture and assembly of the chandelier:

1. Draw a stencil in the shape of a leaf. It is better to do this on thick cardboard.
2. Cut out the resulting sheet.
3. Place the stencil on the plastic and circle it with a pen. Find the optimal arrangement of templates so that there are as few scraps as possible.
4. Cut identical leaves from plastic of all colors. The edges of the leaves may seem too sharp and sloppy to you - don't worry, we'll fix it soon.

chopped leaves

1. When the stock of leaves is ready, we proceed to processing. This is where a soldering iron comes in handy. Warm it up and run along the edge of each element. The plastic will begin to melt and the leaves will begin to round.

Turns out pretty neat.

1. Process all the details in this way.

Leaves need to be prepared a lot

1. Using an awl, make holes in each sheet at the base.
2. Collect twigs from wire and leaves. Use different shades to make the branch more voluminous and brighter. Fasten the wire in the holes of the plastic, try to make the branches thick to hide the wire behind the leaves.

Branches of wire

1. Let's start assembling. From small branches, collect large ones, connecting them together with the same wire as if you were weaving a wreath. Form a lampshade of the shape you need. The wire is flexible, if something went wrong, it can always be corrected and trimmed.
2. At the base of the chandelier, make a wire mount for the cartridge.

1. Put the shade on the chandelier.

Luxurious glass chandelier

From glass wine bottles, you can create a unique chandelier for your living room or bar. Big idea - powerful wooden base and a dozen bottle-plafonds for light bulbs. All this bulky structure will be suspended from the ceiling.

Can a real connoisseur of wine have another lamp?

What you will need to make a DIY bottle chandelier:

• wine bottles - yes different color and stamps, but similar in shape and size;
• boards;
• chains for suspension;
• self-tapping screws with loops - for fastening;
• glass cutter;
• jigsaw;
• grinder;
• drill;
• stain;
• cartridges and wires.

The master class is quite difficult, but detailed instructions will help you solve the problem:

1. Prepare the bottles: clean them from the labels, wash, dry. Make a mark at the same height on each bottle. Cut off the bottom of each with a glass cutter.

Sometimes labels have to be soaked in water for better peeling.

1. Take care of the boards. Cut them with a jigsaw into segments of the desired size - be guided by the area of ​​\u200b\u200bthe room and the number of bottles (in the example there are 10 of them).

sawing boards

1. Finish the edges with a grinder. The ends should be as smooth as the rest of the surfaces.
2. Stain the wood with a stain. The color depends on your interior. The author chose a dark shade.

Get a deep noble color

1. Mark the places for installing bottle-plafonds. They will be installed symmetrically in two rows of 5 each.
2. Using a drill with a 25 mm wood core bit, drill holes in each mark.

Hole drilling

1. At the corners and perimeter of the base, screw the screws with loops from above for fastening to the ceiling. Measure the lengths of the chain of the desired length and connect to the base.
2. Insert the necks into the bottle holes.

bottle opening

1. Prepare 10 rounds and connect them to the cables. Pass each individual wire through the bottle so that 10 wires remain on top of the lamp.
2. The cables are connected in a circuit and insulated. Hang the chandelier by chains. Connect electricity.

Finished wine bottle lamp

Pearl strands - a chic idea and implementation

Glamorous shabby chic chandeliers or sparkling Swarovski - lamps made of stones and beads attract attention and make any interior festive. Making a chandelier of beads and rhinestones with your own hands seems to be something out of reach, in fact, the technology for creating it is very simple.

For such a bright and massive model, prepare:

• ready-made garland beads (sold in any department for decoration) or a large number of beads, fishing line and patience, if you decide to collect the threads yourself;
• garden hanger for flowers or other similar basket;
• acrylic paint in a can;
• knitting wire or special wire for making jewelry;
• glue gun and rods for it;
• wire cutters.

Necessary materials

How to make a lamp from beads with your own hands:

1. Prepare beads. It is better to take ready-made beads (for example, to decorate a Christmas tree), otherwise you will have to tinker with stringing. If the color does not suit you, paint them with spray paint.
2. While the beads are drying, take care of the basket. If it is rusty, brush over the metal. If in good condition or new - just paint.
3. The beads are dry. Now from several garlands you need to assemble one large length. Connect the outer beads with hot glue.
4. Cut the wire with wire cutters into pieces of 5-7 cm. You will need several hundred of them for such a chandelier.

The work is monotonous, but it goes fast

1. Take a garland and one piece of wire. Attach the beads to the basket at the bottom. Continue beading the basket, securing the result with wire so that the decor does not move to one side.

DIY decor for the bottom of the lampshade

1. When the lower part of the basket is completely ready, proceed to decorate the upper half. Long threads are passed through the top of the lamp and pulled over the top edge of the basket. Do not pull the garlands, they should hang freely. Fix them on every turn.

Almost done - it remains to remove the remnants of the wire

1. If you did everything right, the beads completely hid the basket and hanging chains. You can decorate the resulting masterpiece with ribbons, rhinestones or other elements.

Beautiful with and without a ribbon - it's a matter of taste

Subtleties of installation and installation

With the design of the lampshade, everything is clear - there is a place for fantasy and fiction. But what about the electrical part? After all, even the most luxurious chandelier will not work without a correct and safe connection.

We really hope that if you decide to make an electric lamp yourself, then you are familiar with the intricacies of installation and safety rules. But just in case, we list all the important little things again:

1. Never carry out electrical work (even the banal replacement of a burnt out light bulb) with the power on.
2. Do not hang the chandelier by the cable. The design should be based on a suspension: a chain, a rope, a cable - anything, but not a working cable.
3. The light bulb should also not hang on the wire - because of this, breakdowns most often occur. Provide a mount-support for the cartridge at the base of the lamp, so you will remove the load from the cable.
4. Use an indicator to identify the phase of the wiring. You do not need to do this "by experience", connecting the device at random.

The yellow wire usually means "ground"

1. Use 3-wire double-insulated wire. The cross section is selected depending on the total power of the device. For a lamp up to 60 W, an area of ​​\u200b\u200b0.35 mm 2 is enough, up to 120 W - 0.5 mm 2, up to 300 - 0.75 mm 2.
2. Make good contact at the joints. A bad connection can cause the wiring to heat up, which is very dangerous.

Use a screwdriver to fix the cable in the chuck

1. Incandescent lamps are incompatible with paper lampshades - this is a fire hazardous combination.

As you can see, with the observance of simple safety rules and a creative approach, anyone can make a homemade lamp. Photo ideas inspire the search for creative solutions and an extraordinary approach. Your lamp will become a reflection of your personality and decoration of the room.

A chandelier in any room has long been not only a device for lighting. It would not be an exaggeration to say that this is the piece of furniture that acts as the main decoration in any room.

Of course, a do-it-yourself chandelier will be a particularly valuable thing. This will not only highlight the special taste of the owners of the house, but also their creative mind.

Despite the fact that deciding to make a lampshade with your own hands for a chandelier, you will need to spend a lot of effort, because the process requires special concentration - for sure, the time of work cannot be considered wasted, since the work will bring incredible pleasure and even a pleasant aftertaste will remain after, and in the future you will definitely want to repeat this kind of work.

If you are thinking about how to make a chandelier, then you have probably already seen that today you can use the most various materials and sometimes quite unusual. For example, very often the ceiling for a chandelier is made of wood or glass.

However, if you want something even more incredible, then you can also use cardboard, wooden skewers, and even wine bottles. The choice here depends solely on the ideas that the creator has, as well as on various kinds of wishes from the owners of the apartment.

In addition, a chandelier made from improvised materials must also be created taking into account the general interior of the room.

Chandelier made of plastic spoons

Disposable spoons, which most people are used to using exclusively for a picnic, can actually also be one of the simplest and at the same time easily accessible materials for everyone to create an interesting chandelier option for any room.

If you look at a photo of a chandelier of such a plan, you will be struck first of all by the variety colors, and in the future it will be easy to understand that the material will last a long time.

In addition, in order to create such an interesting piece of furniture, you will need a minimum of financial and material investments.

What materials will be needed?

• Any empty plastic bottle. The only condition is that its volume cannot be less than five liters.
• Any plastic spoons. Their number depends solely on the chosen size of the future chandelier.
• Glue that will allow you to glue the plastic together.
• Cartridge from an old, no longer working chandelier.

The process of creating an original chandelier

Prepare plastic bottle. First of all, you need to get rid of the label and the bottom, as well as dry it properly.

Remove the plastic spoons and use a knife to remove any handles that are not needed. The only thing to do is to leave a couple of centimeters above the so-called “scoop” level.

Glue the blanks to the base of the prepared bottle. On the “tail” that remains, you need to apply as much glue as possible and then press it to the surface.

It is very important to continue to cover the entire bottle in this way directly in a circle until the entire prepared perimeter is “occupied” with plastic spoons.

It is best to arrange them in a classic checkerboard pattern and move them together a little.

In this way, it will be possible to reduce the number of "free spots" to a minimum.

• The cover is removed from the old cooked chandelier and placed in a dried bottle.
• If there is a desire, then decorative more often can be done in a similar way.

That's all. It remains only to install the chandelier in the chosen place, and also check its operation by connecting it to the power supply.

Another interesting chandelier option is the chandelier with decorative butterflies. It is worth noting that, having gone to almost any master class for making a chandelier, designers always offer to learn how to create it, which is not surprising, because it can fit perfectly into almost any room interior.

Note!

In addition to the fact that this option looks really luxurious and expensive, even a child can make it with the help of an adult, so its popularity is easily explained.

DIY chandelier photo

Note!

Today, a chandelier is not just a source of lighting. It is one of the main elements of the decor of the room. Handmade lamps are the most popular, as they embody the individuality of homeowners and their extraordinary creative abilities.

Undoubtedly, man-made creativity is a rather difficult task that requires a lot of patience and accuracy. However, doing something with your own hands is always quite exciting and informative. The topic of this review is how to make a chandelier with your own hands.

The choice of material for a homemade chandelier

In order to make a handmade lamp, a variety of materials are used:

• glass;
• tree;
• plastic.

In addition, sometimes, to make a chandelier at home, they use very unusual things:

• paper;
• cardboard;
• disks;
• straw;
• branches;
• wine bottles and more.

When choosing this or that material, it is necessary to take into account your own preferences and the style used in the design of the room.

In addition to the material, the devices may differ in manufacturing techniques. The most common are:

• Japanese origami;
• macrame;
• weaving;
• thread;
• knitting;
• application;
• embossing.

Ideas for creating a chandelier with your own hands - step by step instructions

Nowadays, there are many unusual ideas on how to create a beautiful lamp for an apartment with your own hands. Consider those of them that are more popular.

Chandelier made of plastic spoons

Ordinary disposable plastic spoons are the easiest and most affordable type of material to make a chandelier. The advantages of such raw materials are:

• low cost;
• manifold color solutions;
• durability.

To make a lamp, you will need:

• plastic bottle with a volume of 5 liters;
• disposable spoons;
• PVA glue;
• bulb socket;

Procedure:

1. Prepare a bottle. To do this, remove the label, cut off the bottom, wash the workpiece thoroughly and dry it.
2. Prepare your spoons by cutting off the handles.
3. Paste the entire bottle with scoops with the convex part outward.
4. Fix the cartridge in the made ceiling.
5. Attach the chandelier to the ceiling and plug it in.

Chandelier from plastic bottles

An interesting solution from a decorative point of view would be a lamp assembled from plastic bottles.

1. We take scissors and cut out various patterned shapes and unusual figures. From them we will collect a chandelier.
2. We attach several thin rods to the frame of the old lamp and connect them, removing the central one. At this stage, the lighting device takes the form of a hedgehog.
3. We fix all the prepared figures and forms on the frame of the chandelier. The product is ready!

Consider a particular example - the process of creating a lamp in the form of leaves:

1. Cut out blanks from bottles small size imitating leaves. Usually birch leaves are chosen.
2. Using a soldering iron, slightly fuse the sections of the leaves, and draw the veins - this way they will look more spectacular.
3. Poke holes in the stem of each leaf with a heated thin needle.
4. Use wire to form branches. Screw them to the frame of the future chandelier.
5. Attach leaves to branches. ceiling lamp original design ready!

Chandelier with paper butterflies

The lamp with paper butterflies is also popular. This model looks very impressive and luxurious, although it is quite simple to manufacture.

Sequencing:

1. The role of the base is played by a frame from an old lamp or a simple rim made of metal or wood.
2. Take paper and cut butterflies out of it according to pre-prepared templates.
3. Attach the cut insects to a fishing line or nylon thread.
4. Attach the resulting threads to the frame of the future chandelier and decorate it.

fabric chandelier

This type of lighting device is also based on a solid frame or thick wire. First of all, prepare the base, and only then it will be possible to cut out the material to create the lampshade.

The length of the finished product depends on your wishes, and the width must correspond to the size of the frame. After completing the pattern work, be sure to try on. The next step is to sew the fabric to the base of the chandelier.

In order for the lampshade to retain its shape, you need to correctly approach the choice of material. If you are using light material, then the lower part of the lampshade should be weighted.

As decoration, you can use fringe, braid or lace. But try not to overdo it with the decor.

Plafond of threads and a balloon

To create such an original ceiling, you will need to prepare:

• thick thread or rope about 1 m long;
• old cartridge;
• petrolatum;
• glue and brushes;
• air balloons- 1 - 2 pcs.

Manufacturing process:

1. Inflate the balloon to the required volume, and use a felt-tip pen to mark the boundaries of winding threads.
2. Coat the entire surface of the ball with petroleum jelly using a brush for this.
3. Pour the glue into a wide container and start processing the threads with it as you wind it around the ball.
4. After you fill the ball with threads to the marked borders, it should be left to dry.
5. After a day, burst the balloon and remove it.
6. Cut a hole in the top for the cartridge and insert it. You also need to cut a hole at the bottom of the ceiling - it will be more convenient to insert a light bulb. The product is ready!

Wine bottle chandelier

Such a chandelier is more time consuming to create than the options described above. It is quite difficult to make it. This requires patience and attention. But the effort is worth it!

Necessary materials:

• wine bottle;
• cartridge;
• cable;
• sandpaper;
• metal or wood base.

Of the tools you will need a glass cutter.

Production order:

1. Preparatory stage. Wash and dry the bottle, get rid of the labels, mark with a marker a line along which to cut off the bottom using a glass cutter.
2. Finish the cut with sandpaper.
3. Pass the wire through the bottle neck, and attach the cartridge.
4. Fix the bottle on a pre-prepared frame.

The number of shades for the chandelier depends on you - you can leave one or make five or six.

Chandeliers from laser discs

If a large number of old CDs have accumulated in the apartment, do not rush to throw them away. They will make a pretty creative lamp.

To make an unusual accessory from laser discs, you will need to prepare a couple of planks round shape. Their size should slightly exceed the size of the disks. Still needed:

• fluorescent light bulb;
• steel or wooden racks;
• old magnetic starter;
• many CDs.

Take a board that is thicker and make a hole in it for the starter. Attach everything to the lamp. Then start stringing CDs on it while mounting the racks. Attach the second plank at the end. Work completed.

Wooden chandeliers

Wood is the most common material for all kinds of crafts. The chandelier is no exception.

To make such a lamp, you need:

• wooden planks 0.4 m wide;
• glass jars 1 liter volume for ceiling lamps;
• sandpaper;
• self-tapping screws.

Manipulation order:

1. Treat the planks with sandpaper.
2. Make notches in them from the back for mounting the wire and three holes for the shades.
3. Coat the planks with varnish.
4. Attach cartridges, screw in bulbs.
5. Plafonds will serve as ordinary liter cans, painted white.

Choosing a lamp for a homemade chandelier

To make the chandelier made from scrap materials made by you look even more attractive, you need to choose the right light bulbs for it. The following recommendations will help you:

1. Choose a lamp of suitable power. Remember that overly powerful products can cause a fire.
2. Look at the number of lumens. The larger it is, the more natural the lighting.
3. Consider matching the shape of the light bulb to your appliance. For some models of chandeliers, light bulbs of a strictly defined shape are required. Only then will they work efficiently and correctly reflect the light rays.
4. Be sure to check the expiration date. If you plan to use the lamp often, then look at the lamps with the longest lifespan.
5. Take an interest in what kind of light the lamp will glow - cold or warm. For the home, it is better to purchase an option with a warm shade of light. So the situation will seem more comfortable.
6. Do not ignore the energy consumption of the light bulb. Best Choice considered products with low energy consumption.
7. Check for the presence of mercury in the lamp - this determines how it is disposed of. Mercury-containing products cannot simply be thrown into the trash. They must be handed over to special collection points.

Product decoration

As a decoration for homemade chandeliers and lamps, you can use a variety of things:

• paints and varnishes;
• lace;
• satin ribbons;
• fringe and braid;
• beads, beads, rhinestones, pebbles.

A good decor is artificial or dry flowers, feathers cut from butterfly fabric. In general, how to decorate the finished product is up to you. You can use any improvised means that your imagination indicates.

In conclusion, we note that such a homemade light fixture as a chandelier will definitely bring a touch of freshness and style to the room's decor. Your relatives and guests will definitely note the originality of the accessory and your skill. In addition, a handmade lamp is a great gift for a friend or colleague.

Original photo ideas for homemade chandeliers

Ceiling chandeliers - lighting devices that perform two functions at the same time. Firstly, they are used to organize the main lighting in the room. Secondly, devices are one of the main elements of the decorative decoration of the room.

Numerous manufacturers offer equipment of different designs, but it is far from always possible to find something really worthwhile that fits into the overall interior of the room. In other situations, the cost of the chandelier you like may be too high. That is why many people are interested in how to make a ceiling lamp with their own hands.

Handmade products will be unique and original, thanks to them you will be able to express your taste and character. It is not so easy to make such devices on your own. The work requires a certain imagination and perseverance. On the other hand, a ceiling chandelier can be created from improvised means and items that have become garbage for you.

Choose any materials for manufacturing - wood, plastic, metal or glass. Chandeliers made of wine bottles, wooden skewers or straw look very original. To summarize: the choice of material for a homemade lamp completely depends on the imagination and idea that arose in the head of the owner of the apartment.

Varieties of lighting fixtures

The final stage of any repair and construction work will be the purchase lighting fixtures. Often the main one is the ceiling chandelier, which is installed in the center of the room, provided it has the correct geometry. There is a wide range of luminaires on the market that differ in design, shape, principle of operation, and even the presence / absence of certain structural elements.

Today, all people strive to save money, so it will be important to use a chandelier for energy-saving or LED bulbs. It is advisable to choose products with partially or completely closed shades, in which lamps are hidden. Due to this, you will protect the ceiling structure and be able to protect yourself in the event of a light bulb explosion (the fragments will remain inside the ceiling).

If you still like a chandelier with an open arrangement of light bulbs, then inspect it and make sure that after installation the luminous flux will be directed downwards. There is also a simple rule - the simpler the product, the easier the subsequent installation.

Another point to consider when choosing a chandelier is the purpose of the room and its dimensions. In spacious halls with high ceilings, volumetric lamps should be installed. hanging type. For small spaces, space savings are required, so focus on flat (flattened) options.

Conventionally, chandeliers for the ceiling can be divided into two main varieties:

• classic hanging;
• flat with the closest placement to the ceiling.

And the latter are divided into two subcategories - built-in and overhead. Overhead shades are considered the best solution for bathrooms, corridors and kitchens. The presence of a separating platform ensures their rapid cooling and high fire and electrical safety.

Recessed lights are also called spotlights. They are often installed (more correctly, they are built in) in furniture, dropped ceilings or arch structures. Manufacturers provide a wide variety of shapes, colors and design solutions for both traditional and flat luminaires.

Finally, in addition to design features the fixtures themselves, distinguish between the type of light sources used:

1. The filament lamp is one of the most common and simple options. The cheapest light source. Under mechanical action, it quickly fails due to the vulnerability of the structure, burns out relatively soon (in the case of continuous operation, it can burn out in two to three days).
2. The energy-saving fluorescent lamp is one of the the best varieties housekeepers. Advantages of a product are connected with profitability and long service life. Along with LEDs, it is the most common light source in developed countries.
3. The LED lamp is an expensive product, the popularity of which is increasing every year. The efficiency factor exceeds 90%, and in the case of high-quality devices it reaches 98%. They are characterized by a longer service life and increased reliability.

An example of a homemade lamp

Consider one of the simplest examples of a DIY ceiling lamp.

For the manufacture we need:

• 5 l plastic bottle;
• plastic spoons - their number depends on the dimensions of the bottle, which will become the frame;
• quick-drying adhesive for plastic;
• sharp knife;
• cartridge with wire.

To begin with, a frame is prepared from a plastic bottle. Remove any labels from the item, rinse and dry thoroughly. After that, feel free to cut out the bottom. Cut off all the handles from the plastic spoons, but so that small pieces of 2 cm remain.

Glue the resulting scraps with “scoops” onto the base of the frame from a plastic bottle. To do this, we just need the remaining pieces of handles, which need to be poured abundantly with glue and pressed tightly to the surface (the convex part of the scoop should look out). Tape the container in a circle until the entire surface is hidden. Ideally, the spoons are placed in a checkerboard pattern, followed by a shift for a tight fit and no visible areas.

Cartridges with wiring can be removed from some old chandelier, then installed and fixed in a new product by pulling the bottle through the neck. A decorative bowl can be decorated with the same blanks using glue and placed on the neck.

To make sure that the product is working, at the final stage, screw the light bulb into the lamp and connect it to the power source. If successful, it remains to install the chandelier on the ceiling.

For a more stylish design and change of colors, you can paint plastic spoons. This will increase the originality and attractiveness of the product.

Style selection

In addition to the points listed in the first chapter of the article, when choosing a chandelier, you need to focus on a certain style. This is also true for those cases when you decide to make the product yourself. Comfort, coziness and how pleasant it will be to be in it depend on the interior created in the room.

The ceiling chandelier is the main element of the decor, therefore, with a competent approach, the perception of the environment will improve, with a careless one, it will completely deteriorate. As you know, “breaking is not building”, therefore, in order to spoil the interior, it is enough to choose the wrong style.

Decide in advance on the design of the future lamp. The most common styles for chandeliers are hi-tech, modern and provence.

High tech

It includes products made of glass and metal. Modern appliances fit perfectly into the design of the bedroom and living room. Externally, the chandelier may look chaotic (with an arbitrary arrangement of decor elements). Great option for people looking to modernize an apartment or a private house, but not wanting to make something too complicated. Any errors made in the manufacture of the chandelier may look like an original design decision.

Modern

In accordance with this style, appliances are made of glass and wood. The ceiling lamp is characterized by perfectly even and clear lines, has the correct geometry.

Provence

The most complex execution, which is suitable for people who understand the principles of hand-made. Various fabrics, colorful ribbons, beads, embroideries can be used to decorate the chandelier. The lamps are gentle, suitable for creating a romantic atmosphere. Provence style lighting fixture is suitable for decorating any living space.

Mounting materials

For ceiling mounting of the lamp, certain materials and tools will be required:

• the lamp itself;
• junction box;
• screwdriver (curly);
• switches;
• as an alternative - dimmers (a rotary toggle switch that adjusts brightness, turn on / off the light bulb);
• wires;
• electrical tape;
• indicator (tester);
• pliers;
• connecting blocks.

Ideally, electrical wiring should be routed using connector blocks. If such products are not available, then twist the bare ends of the wires with pliers and hide under a dense layer of electrical tape. The compounds can also be placed under polymer caps. Make sure the wires wrap tightly around each other.

When laying the cable, pay attention to the material from which it is made. It is advisable to twist aluminum with aluminum or copper with copper. When two wires come into contact different materials gradual oxidation will occur, leading to burnout and loss of contact.

Work sequence

Before installing the ceiling light, determine the phases of the wires. To do this, you need an indicator screwdriver or a special probe. If you attach the working surface to the phase core, the light bulb will start to glow. Otherwise, the wire belongs to the zero phase.

Next, you need to determine the phases on the wiring of the lighting fixture. Plug two wires into the outlet, but in no case touch the third one. If there are several bulbs on the chandelier, then about half of them will light up. Leave any wire in the outlet and replace the second with a third. The second half of the bulbs should light up. Thus, the wire that is constantly in the outlet (and when connected in turn with the other two turns on the light bulbs) is the zero phase.

Attach the lamp to the ceiling. For this, both a classic hook sticking out of the ceiling and a mounting rail (included in most kits) are used. modern devices). If there is a hook from the old chandelier, it is advisable to dismantle it.

Connecting fixtures

If it is necessary to connect a floor lamp or chandelier with a two-wire cable, difficulties should not arise at all. Simply connect the ends of this cable to the two ends of the wiring. If the lamp consists of several parts and there are more wires, then it is correct to twist them in pairs, subsequently connecting them to the desired core electrical wiring in the apartment.

A three-core cable indicates the presence of two normal and one zero phases. Follow the scheme described above to find the zero phase. After that, connect the device to the house wiring.

Traditionally, the zero phase on the lamp has wires with blue insulation, the usual one is brown, black or red. If there are several blue wires, then they need to be connected in pairs, and then connected to the zero phase. Do the same with other colored parts.

Products with four cores are much less common. The latter is intended for grounding and is usually painted yellow-green. It should be screwed to the luminaire body with a conventional screw. Be sure to isolate all connections.

For the manufacture of ceiling lights any materials can be used with your own hands. The main thing is to choose the style and shape in advance and navigate the installation site. Also, before starting work, it is advisable to draw a sketch of the future product. Everything else is limited by your imagination.

Connecting homemade lighting fixtures is carried out in the same way as purchased ones. Using our instructions, you can easily connect ceiling chandeliers with two, three and even four cores. The main thing is not to forget about safety rules and ensure complete insulation of the wires, excluding a short circuit.

Find out how to make a lamp out of wire, building mesh, so that flowers grow inside it. How to turn a snag into a lamp, and tree branches into a floor lamp?

How to make an original lamp?

A very interesting design item is obtained from the simplest materials, most of which are left over from a picnic. If you went with friends, relatives to nature, you must definitely remove the garbage behind you. This not always desirable job will be made more enjoyable if you ask to fold the plastic spoons separately. If you have children traveling with you, arrange a competition to see who can throw more and faster spoons into a separate garbage bag or bag.

You will also need water canisters. After a fun picnic, after arriving home, after some time, you can make original lamps from the containers left after the feast. Hand them to your friends, leave them for yourself to hang in the hallway, in the kitchen or in the country.

So, here's how such a chandelier is created with your own hands or with the help of your home. First put side by side:

• 5 liter oval plastic bottle;
• disposable plastic spoons;
• cable with cartridge and plug;
• low power LED bulb;
• pliers;
• glue gun;
• screwdriver
• stationery knife.

So that such original lamps do not lead to a fire, take an LED, and not an ordinary Ilyich light bulb.

For information: 4–5 W of LED bulbs correspond to 40 W, and 8–10 W to 60 W of conventional electric ones.

Carefully, so as not to cut yourself, remove the bottom from the canister with a knife.

Also, observing safety precautions, so as not to get hurt, cut off the handles of each plastic spoon completely. Applying a little hot glue from a gun to the cuts of the “blades”, glue them to the bottom tier of the bottle. Usually 17 pieces go here. Then, overlapping, attach the second and subsequent rows, arranging the elements in a checkerboard pattern.

To cover the neck, glue 10-12 spoon blades together, forming them into a ring.

Pass the cartridge with a light bulb and cable through the cut bottom hole in the bottle. If this "electrical" part causes difficulty for women, call the husband. If you don't have one, buy a cable from the hardware store with the socket and plug already screwed to it. You can borrow this working part of the lamp from the old one.

Put a “ring” of spoons on top of the canister, screw on the lid. To do this, let the husband drill a hole in it with a drill, and you yourself can do this manipulation with a hot nail or self-tapping screw, holding it with pliers. The original lamp is ready.

3 models of designer lampshades with your own hands

Ideas are in the air. If you are in the country and this piece of furniture is not there, it is easy to make it yourself from what is at hand. Take:

• hollow dishes;
• wire;
• mounting foam;
• gloves;
• paint;
• brush;
• pliers.

As a basis, you can use unexpected things: an old pot, a planter, an already unnecessary children's pot.

Turn over any of these auxiliary items, put on a plane upside down. Wind the wire, its turns repeat the shape of the future product, should be the same as the lampshade. With your own hands, but with gloves, pick up a can, squeeze a little foam out of it onto the frame, close the wire, let it dry.

After that, make the contours more even with a knife, cutting off the excess. Paint in your favorite color, white looks airy and elegant. Such a lampshade, made with your own hands, will decorate a country gazebo. You can make a few and hang them here. By avoiding big expenses, this way you decorate the space.

This lampshade looks stylish and modern, while the next one has a classic look. For it use:

• thick wire;
• pliers;
• small plastic water bottle.

Let's start making a lampshade with our own hands by making the upper central element. To do this, wind 1 turn of wire onto the bottle, remove it, cut off the excess, twist the ends to make a ring. Its diameter should be such that a cartridge can be threaded from below, and it would stay on the ring, would not come out through the top.

Now roll the large outer ring from the wire. We will fasten it. To do this, cut 4 identical pieces of wire with pliers, fasten the first end of each to the small, and the second edge to the large ring. The upper part of the lamp is ready.

The size of the lampshade depends on whether it is made for hanging from the ceiling or for a table lamp. The first is greater than the second.

Roll the bottom ring out of the wire, it is the largest. Connect it to the second top five pieces of wire, distributing them evenly. It remains to decorate the frame of the lampshade. To do this, pass the wire through the second ring, twisting it in a wave and twisting it through the base. Do the same for the second ring.

It remains to sheathe it with fabric. Attach the flap from the second top to the bottom ring, cut to size, adding to the seam. Hem the large sides of the resulting rectangle. Sew the canvas on the side right on the frame, decorating this place with braid. That's it, you made a wonderful lampshade with your own hands.

If you want to see for yourself modern ideas on this topic, please! In skillful hands, the construction grid will turn into a stylish lampshade.

With your own hands or, having called on a man, cut a rectangle from it with metal scissors. To fix the cartridge, twist a circle from the wire, fix it on top of the lamp with four pieces of wire.

If you do not have coarse mesh, use pliers to cut off the excess sections so that the distance between the strips of wire becomes greater. Paint the lampshade, and its frame is ready.

And now the magic begins. You can make an original lamp, which will benefit not only people, but also plants. Attach a planter with a flower at the bottom of the lampshade. You can tie, woven using the macrame technique, for the lower turns of the wire with a thick rope. Check that the fastening is secure.

If there is a man in the house and welding machine, call on this tandem to make a metal ring with "beams" that need to be welded to the bottom of the lamp.

If you have a home climbing plant, for example ivy, pass its lashes between the cells of the lattice. The original lamp will become a house for a flower. It is better not to use ordinary electric bulbs, as they are very hot and can burn the leaves of plants. In addition, the air around the flowers will be too hot. Screw in an LED or fluorescent light bulb.

For such an original lamp, you needed:

• construction mesh or strong wire;
• brush and paint (optional)
• pliers;
• light bulb with cartridge;
• flower.

You can well fix cups with seedlings on such a lampshade, thereby finding an additional place for growing it and conditions for lighting in the evening.

We make a floor lamp, a table lamp with our own hands

Walking in the forest, do not pass by a rolled ornate driftwood. Put it in a bag, take it with you. Wash at home, if there is bark, peel off with a knife. Go over the surface with fine sandpaper, if necessary. Finish with wood varnish.

In order for the table lamp to hold well, the snag must be screwed with self-tapping screws to a solid pedestal. It should be heavy enough. Oak is suitable for him. If you find a broken branch of this tree in the same forest, saw off a circle 5–7 cm thick from the thick part.

It will also need to be sanded and varnished. When these wooden blanks are dry, connect them with self-tapping screws of sufficient length, first passing them through an oak stand, and then plunging them into a snag. You can also use nuts and bolts.

How to make a lampshade with your own hands, you already know. Therefore, make it and attach it to a snag, wrapping it with wire.

If the old floor lamp stand is no longer happy or you just want to decorate it, also use wood for this. See how good the birch racks look. Attach a branch of this tree to the lamp and see what kind of floor lamp you could make with your own hands.

How to crochet a lampshade?

If you are fed up with an old floor lamp, you can transform it with your own hands, giving it a "zest". Take the openwork braid, sew it on the top and bottom of the fabric lampshade. You can decorate with glitter by gluing them in the form of a pattern, evenly or randomly.

A floor lamp or a chandelier will turn out unique if you knit a lampshade for them with your own hands. This can be done with a crochet or thin knitting needles. For the first option, you will need:

• hook;
• cotton threads;
• pattern for knitting napkins;
• water;
• starch;
• ribbons.

You can use, for example, such a pattern for a napkin.

Measure the top circumference of the lampshade, we need its diameter. Tie a chain from the air loops. Next, knit in a circle, based on the napkin pattern. Measure the height of the lampshade and the diameter of its bottom circle. Based on these data, draw a trapezoid or a rectangle (depending on the shape of the lampshade). Crochet this pattern. Sew on the side.

With single crochets, tie the upper circle of the lamp and this trapezoidal or rectangular part.

Boil a glass of water, stirring, pour 200 ml here cold water, in which 1.5 tbsp. l starch. Boil for 1 minute, remove from heat, cool. Drop a knitted lampshade here, soak well, then wring out, let the water drain, and the fabric will dry, but remain slightly damp.

Put it on the plafond. In order for the knitted lampshade to hold well, you can skip several ribbons or ribbons between the loops and tie them.

Plafonds look very nice if they are decorated with crocheted flowers.

A solution of starch or PVA will help shape the knitted lampshade. Put it on the frame, apply glue, let dry.

In the second case (when knitting needles are used), you need to make calculations for knitting, draw a pattern according to the standards of the lamp, knit a trapezoid or rectangular lampshade. Similar models are suitable for floor lamps, chandeliers of a strict form. If you need to crochet a semi-circular lampshade, make wedges first, and then connect them with single crochets.

Here is another openwork chandelier. It is pleasant to make kisei with your own hands and decorate the bottom of the product in a circle. But first you need to create the lampshade itself. The crochet pattern for this beautiful thing is presented right there.

A table lamp will look amazing on the bedside table if there is such a lampshade on it, the knitting pattern of which is also given.

If your son or daughter does not let you finish the work, demanding attention, invite the children to make a lampshade too, let them twist strips of paper into tubes with their own hands. It is better to wind them on a thin pencil or a wooden sushi stick, and then glue the free edge so that it does not unfold.

Now you need to glue the resulting blanks, using an object as a frame suitable form e.g. a 5 liter canister. Having made the first inner layer, let the child move on to the second. There should be several of them to close the gaps. When the PVA is dry, cover with this lampshade table lamp or hang it from the ceiling. Looks original and extravagant.

If you are interested in other ideas on this topic, watch the video:

Very interesting option disk lamps: