Glue nails. Technical characteristics of liquid nails "Moment Installation" for PVC panels. Liquid nails for concrete
During the repair of premises, finishing buildings and decorating the interior, it is often necessary to fasten various materials. Stick ceramic tiles, plastic, chipboard, mirrors and even bricks quickly and easily with modern look construction adhesive - liquid nails. Due to the content of fine-grained filler in it, it can fasten parts of different materials, and the rubber in the composition is responsible for high ductility. The popularity of such glue among builders quickly gained momentum, because. liquid nails have many advantages over other materials:
- fast setting (from several minutes to 24 hours);
- resistance to different temperatures;
- ease of use;
- no need to make holes as for ordinary nails;
- moisture resistance;
- economical consumption;
- extensive scope;
- withstands heavy loads;
- affordable price.
In total, there are two types of liquid nails, which differ in composition.
- Neoprene, created on the basis of an organic solvent. They have a strong chemical smell and are not safe for humans. Differ in moisture resistance.
- Acrylic (water based). Absolutely harmless, but not resistant to high humidity and suitable only for uneven (porous) surfaces.
Liquid nails, depending on the purpose of use and scope, are divided into universal, for tiles, concrete, plastic, mirrors, foam, metal, etc. Each manufacturer indicates the purpose of their product on the packaging. It depends primarily on the composition. Of course, despite the large number of advantages of liquid nails, it is easy to buy goods of inadequate quality on the market. This can lead to such unpleasant consequences as poor bonding of the material, rapid loss of strength, bad smell for a long time, etc. In our ranking of the best liquid nails, only trusted manufacturers and products with positive reviews are presented.
The Best All-Purpose Liquid Nails
In everyday life and construction as much as possible convenient way connections various materials become universal liquid nails. With one cartridge at hand, you can bring to life bold design solutions. Experts recommend paying attention to several compositions.
3 STAYER BlackPRO UNIVERSAL
The choice of professionals
Country: Germany
Average price: 215 rubles. (280 ml)
Rating (2019): 4.8
Liquid nails from Germany STAYER BlackPRO UNIVERSAL can boast a wide scope of application. The high quality of the product was appreciated by domestic finishers. With its help, door and window frames, ceramic tiles, wooden elements, mirrors and much more are mounted. Professionals note the excellent adhesion of the glue, it seizes immediately and securely fixes the parts to be glued. Liquid nails feel great at different temperatures (-20 ... + 60 ° C), which allows them to be used not only indoors, but also when finishing outdoor surfaces. It is only recommended to apply the composition at positive temperatures (+10 ... + 30 ° С). When developing the product, German chemists took into account the experience of specialists from different countries.
Users with the same success mount PVC panels and wood, ceramics and plastic using liquid nails. There are no special complaints about the glue.
2 Titebond Multi Purpose
The most durable
Country: USA
Average price: 215 rubles.
Rating (2019): 4.8
Liquid nails from a well-known American manufacturer have good technical characteristics. An adhesive designed for universal use, suitable for both indoor and outdoor use. Reliably and quickly glues chipboard, MDF, metal, tiles, concrete, etc. Just 20-30 minutes is enough to get a super-strong result. Titebond Multi Purpose has a light beige tint, optimal consistency and is characterized by the absence of a strong odor.
Advantages:
- safe for humans;
- suitable for a large number of materials;
- frost resistance;
- moisture resistant;
- dries quickly;
- reliably and firmly fastens materials.
Flaws:
- not detected.
Construction is an area that is relevant always and everywhere. People sell and buy real estate, renovate premises and create unique interior designs using building materials. One of the most popular among them are liquid nails. But what is their difference from ordinary building glue?
1 Moment Mounting Universal
The optimum ratio of price and quality
Country Russia
Average price: 230 rubles.
Rating (2019): 4.9
Construction adhesive of the most popular manufacturer "Moment" has a universal purpose. It is suitable for bonding fiberglass, concrete, wood, brick, polystyrene panels, etc. With a setting time of only 15-30 minutes, liquid nails " Moment Mounting» They also have high strength. They are able to withstand a load of 40 kg / m². A great advantage of this product over similar products is its high resistance to temperature changes (in operation from -29 to +60 ° C).
Advantages:
- slowly consumed;
- very durable;
- elasticity;
- water resistance;
- convenient packaging;
- a wide range of applications;
- can be used even on uneven surfaces.
Flaws:
- bad smell;
- toxic.
The best liquid nails for plastic
To securely glue the plastic, and at the same time not dissolve its surface, special liquid nails are required. Avoid buying adhesives that contain organic solvents.
2 Quelyd Mastifix Ultra
Best quality
Country: France
Average price: 212 rubles.
Rating (2019): 4.7
Quelyd liquid nails are designed for bonding plastic, stone, wood and other materials. The adhesive is water-based, solvent-free, and therefore odorless and completely safe for humans. The setting force can reach 150 kg per m². Very heat resistant (up to +120° C). Adhesive mortar Mastifix Ultra can be used indoors and outdoors.
Advantages:
- high efficiency;
- dries very quickly;
- excellent customer reviews;
- withstands heavy loads;
- suitable for many materials;
- heat resistance;
- Great for bonding PVC.
Flaws:
- not detected.
1 KRAFTOOL KN-915
Better adhesion
Country: Germany
Average price: 150 rubles.
Rating (2019): 4.8
German glue KRAFTOOL KN-915 is designed for gluing PVC products. Ideal for kitchen and bathroom. Strongly glues plastic both among themselves and with wood, dry plaster, metal, etc. Differs in instant setting - only 10 minutes. Plastic, easy to use and safe. An additional plus is the content of an antiseptic in the composition. Liquid nails KRAFTOOL KN-915 are resistant to moisture and high temperatures.
Advantages:
- good adhesion;
- perfectly glues plastic;
- antiseptic in the composition;
- resistant to temperature changes;
- created using unique technologies;
- low cost.
Flaws:
- not detected.
The best liquid nails for tiles
Some options ceramic tiles or mosaics need to be laid with liquid nails. The adhesive seam must hold sufficiently heavy finishing elements, both in dry rooms and in bathroom conditions.
2 Tytan Ceramic and stone
Excellent value for money and quality
Country: Poland
Average price: 180 rubles.
Rating (2019): 4.8
Acrylic adhesive Tytan is ideal for ceramic tiles. It contains no solvents and is almost odorless. The initial setting occurs within 5 seconds! Due to the optimal consistency and special packaging, Tytan Liquid Nails are easy to apply on both vertical and horizontal surfaces. Also suitable for other products: wood boards, gypsum decor, stone, ceramic skirting boards, etc.
Advantages:
- does not crack;
- perfect white color;
- can be painted after drying;
- without smell;
- firmly glues products;
- high adhesion.
Flaws:
- not detected.
1 LIQUID NAILS LN-901
Best Cast
Country: USA
Average price: 220 rubles.
Rating (2019): 4.9
A true classic in its segment are LIQUID NAILS liquid nails. This product has been on the market for about 30 years. Differs in special wear resistance - up to 50 years. When gluing, it makes it possible to correct the position of materials within 10 minutes. Differs in resistance to humidity and differences of temperature. Strongly glues even the heaviest materials, including ceramic tiles.
Advantages:
- excellent composition (without acetone, toluene);
- convenient to use;
- firmly and reliably glues materials;
- long service life;
- high impact resistance.
Flaws:
- strong chemical odor for the first few days.
The best liquid nails for wood
Wood is a unique building material. To reliably glue wood elements, liquid nails must have good adhesion, penetration and moisture resistance.
2 Vermeister Quick Stop
For vertical surfaces
Country: Italy
Average price: 440 rubles. (310 ml)
Rating (2019): 4.7
Italian glue Vermeister Quick Stop has a quick setting. It is water-based, which makes it safe to use indoors. The composition does not contain solvents hazardous to humans, epoxy or amine compounds. During operation, there is no smell, so additional ventilation of the room is not required. Liquid nails are optimally suited for the installation of wooden accessories such as profiles, skirting boards, extensions, architraves, etc. Due to the high adhesive ability, a strong and durable seam is formed in a short time. The maximum strength of the joint appears 1-2 days after gluing.
Builders and finishers note such advantages of Italian glue as instant setting after joining parts. The edging or platbands made of wood are ideally mounted. The downside is only internal application composition.
1 Makroflex Mf910
Elasticity and water resistance
Country: USA
Average price: 200 rubles. (400 g)
Rating (2019): 4.9
When it becomes necessary to glue wood panels inside or outside the house, the best option Makroflex Mf910 liquid nails will become. Due to moisture resistance, it is possible to mount a tree that has not dried out. The elasticity of the adhesive makes the connection reliable and durable even under conditions of strong vibration. The frost resistance of the composition expands the scope, allowing you to work with wood both inside the house and outside. Experts note the incombustibility of the material after complete hardening.
Users are impressed by such qualities of liquid nails as fast setting on the surface. At the same time, it is possible to make adjustments to the position of the wooden panels for some time. One feature of the gluing technology should be taken into account. After applying the adhesive to one of the surfaces and holding for 5 minutes, it is necessary to tightly connect the parts to be glued, and then separate them. After 5-10 minutes, the final connection is made.
The best liquid nails for stone, brick and concrete
Wall decoration with stone or concrete tiles has become very fashionable. For the installation of heavy structures, heavy-duty liquid nails with a short drying time will be required.
3 ZUBR Expert KM-250
The best domestic liquid nails
A country: Russia (produced in Poland)
Average price: 237 rubles. (300 ml)
Rating (2019): 4.6
Domestic development ZUBR Expert KM-250 is widely used in professional construction. Transparent composition has excellent adhesion, vibration and impact resistance. Experts note the resistance of the seam to adverse weather conditions. The strength of the connection is maintained in a humid environment, with strong temperature changes, under the influence of UV rays and ozone. At the same time, the adhesive remains elastic and reliable. Builders use the composition when sealing or joining concrete, stone, ceramic tiles, for gluing wood or PVC panels. Finishing work can be done both inside and outside buildings.
Users speak flatteringly about the strength and durability of the adhesive seam. Liquid nails do not spoil the finish when dried, transparency persists over the years. The disadvantage is the presence of solvents in the composition, as well as the high price.
2 Ultima 309
Liquid nails for heavy structures
Country: Malaysia
Average price: 193 rubles. (360 g)
Rating (2019): 4.8
Ultima 309 is a professional heavy-duty liquid nail from Malaysia. It is specially designed for the installation of heavy structures. You can use the composition as when conducting internal works, as well as outdoor decoration. Experts note that liquid nails instantly seize, firmly holding stone or concrete tiles. Additional support is not required. After drying, the seam withstands not only mechanical stress, it is not afraid of moisture and detergents. Despite the rapid drying (3-5 minutes), the final hardening occurs after 24 hours.
Users in reviews call Ultima 309 the best liquid nails for stone, brick and concrete finishing materials. They are affordable and easy to work with. But due to the presence of solvents in the composition, it is necessary to ventilate the room.
1 Kraftool KraftNails Premium KN-901
Maximum resistance to temperature extremes
A country: Germany (produced in Poland)
Average price: 202 rubles. (310 ml)
Rating (2019): 4.9
The strongest adhesive in its class is the German-Polish product Kraftool KraftNails Premium KN-901. It provides super-strong bonding of heavy building materials. Experts consider liquid nails the best squad in terms of resistance to temperature extremes. The connected elements can be operated both in severe frost (-30°С) and in tropical heat (+50°С). With the help of a unique adhesive, it is possible to mount problematic materials, such as frozen wood, wet lumber, brick, stone or concrete panels, hardboard, metal, slate, etc. Only due to super-strong adhesion, liquid nails manage to tightly adhere heavy elements.
Builders and finishers never cease to be amazed at the endless possibilities of the product. They praise it for its elasticity and strength, durability and water resistance, ease of use and resistance to temperature extremes.
- it takes less time to set the adhesive elements;
- a tighter fit of the surfaces during gluing is achieved, which makes them waterproof;
- provides a more attractive appearance and long-term effect, which your customers will be very happy about.
For best results, liquid nails should be applied to a clean, dry surface at an ambient temperature between 1° and 30°C.
Mounting liquid nails provides strength
The projects you carry out, their appearance and durability are always reflected in your reputation. If you want to admire the results of your work all the time, and your objects retain their original appearance for a long time, this is the best advertisement for you. You can make it so that customers will look for your contact information themselves. To do this, you need to follow these small and simple tricks that your competitors may not even be aware of. Mounting on liquid nails is one of the professional secrets.
Liquid nails - application on wooden surfaces
Use liquid nails as a fastening material along with regular nails to provide:
- increased strength. Ordinary nails can loosen over time, boards can fall out of their places. A small amount of liquid nails will help make fasteners strong and durable.
- corrosion protection. Liquid nails can protect metal nails from the damaging effects of moisture. And accordingly, in the future, prevent the unpresentable appearance of rusty nails, which, moreover, can become dangerous for you and those around you.
Sheds:
Liquid nails can be used in many wood processing operations. Strengthen the roof of the canopy by providing it reliable protection from gusty winds. To do this, apply some liquid nails along the edges of the sheathing to the rafters. And the next time a heavy wind hits, your customers may be the only lucky ones who don't get blown away by the wind.
Small fences:
Decorate your customer's site with a flexible retaining wall small size. In addition, it will protect the soil from erosion.
Apply 2 drops of liquid nails to the joints in order to extend the service life and make the fastening stronger. This tool is best suited for garden fences. It will protect the fence from seasonal weather changes and temperature extremes. In addition, the tool is easy to use. It will take only 10 minutes to improve the landscape of the suburban area.
Liquid nails are applied only once, but they will hold the elements together landscape design into one indivisible wall, which will add attractiveness to the site and at the same time will delight your customer and his guests for many years.
Do not use this tool to secure large, bulky items.
Liquid nails - instructions for repair work
After a strong squally wind, damage to building structures usually remains. At the same time, it is very important to detect and eliminate them in time so that the situation does not worsen. The instruction recommends using liquid nails for various natural damages.
Here is a list of some of the damage that can be found after bad weather:
| Damage | Troubleshooting |
|---|---|
Tile problems. Problems in roofing seams. Gutter damage | liquid nails bond wet surfaces and stop leaks |
| Problems with trim and siding | liquid nails for PVC glue all known building materials, work quickly and reliably and hold for a long time in all weather conditions |
| Damage to windows and doors | liquid nails for PVC act on all building materials, stick firmly and do not turn yellow under the influence of ultraviolet rays |
| Cracks or breaks in wood trim | liquid nails - moisture resistant adhesive for indoor and outdoor use |
Cracks or breaks in plastic trim | to secure small parts, such as a house number, small decorations, or moldings. Liquid Nails for PVC is a strong, transparent, fast-acting adhesive that does not turn yellow over time. |
What to do if a storm warning is issued? You should stock up on liquid nails. With their help, you can fix your roofing around the edges.
How to use liquid nails on wood
Using only nails and screws will not always give the desired result that you expect. In addition, outwardly the work becomes completely unattractive. We will tell you how to use liquid nails when working with wood and lumber products.
When laying floors made of wood or some other lumber, add suitable liquid nails to ordinary nails. This will be of great help to you if you want to:
- to make your floors stronger and last longer;
- minimize the consumption of conventional nails and screws;
- so that your floors do not creak;
- so that the heads of the nails do not stick out of the floors, and you are not afraid of getting caught or tripping. In addition, so that the floors do not rise and fall, while creating an ugly appearance of the flooring.
Remember that liquid nails can be used not only for flooring.
Here are a few more ways to use them:
Treatment of stairs and steps
Use liquid nails in the process of assembling and fitting stairs and steps. The adhesive is applied before the material is fixed with nails or screws.
Treatment wooden skirting boards and curb rail
Skirting boards sometimes have to be removed and therefore, they must be both rigid and flexible. Therefore, we advise you to use liquid nails before using ordinary nails and screws for their fastening.
Processing railings with decorative ornaments
Liquid nails are also suitable for railings. The tool must be combined with ordinary nails and screws to increase the service life of the product. These same varieties of liquid nails are suitable for installing decorative ornaments. This will be a professional finishing touch to your work and won't take much of your time. It is important to remember that the glue is not intended for gluing products made of 100% natural wood.
Glue liquid nails to provide soundproofing
The quality of the walls often depends on how well they isolate the room from unwanted noise. Fortunately, there is a fairly easy and inexpensive solution to this soundproofing problem.
Glue liquid nails (sealant) is specially designed to fill microcracks and cracks and do not allow extraneous noise to penetrate into the room.
Acoustic sealant has been proven in testing to actually reduce noise transmission. For example, applying sealant to the wall where it joins the ceiling improves the sound transmission coefficient from 29 to 53 units.
For optimal results, follow the tips below:
For new buildings:
- Before installing drywall, apply? the contents of the bottle of liquid nails on the lower and upper surface of the timber;
- Install the drywall by reinforcing the screws with liquid nails. This composition is designed specifically for walls and serves to tighten screws and provides additional sound insulation;
- Treat with liquid nails all seams, switches, electrical sockets, joint perimeters, windows and other places where air can penetrate, and with it sound;
- Add more? bottle of liquid nails at the junction of drywall with the floor and ceiling.
To modernize old walls:
- Apply? a bottle of liquid nails at the junction of drywall with the floor and ceiling;
- Apply sealant to all slots, switches, electrical outlets, joint perimeters, windows and other places where air can enter, and with it sound;
- Apply another coat of liquid nails on top of the drywall. The sealant is designed specifically for walls and serves to tighten screws and provides additional sound insulation;
- Add again? bottle of liquid nails at the junction of drywall with the floor and ceiling.
How to use liquid nails for wood and other materials
Before using liquid nails on wood and any other materials, read our recommendations. The quality of bonding and sealing, the drying and hardening time of the adhesive depend on several factors:
- Temperature of air and surface intended for gluing;
- The lower the temperature, the slower the glue and putty dry and harden. For example, at a temperature of 10 ° C, this will take twice as long as at a temperature of 21 ° C;
- Porosity of the structure. It affects the rate of absorption of water and solvent by the surface;
- On a dense surface, such as plastic, metal or painted surfaces, the adhesive will dry more slowly, and the final hardening may take from a day to several weeks! Therefore, it is recommended to glue such objects that at least one half for gluing has a porous surface;
- Humidity of the air and the surface intended for gluing.
A damp and damp surface makes the drying process difficult, especially for rubber products. In order to connect a constantly wet or damp surface quickly, you should use an adhesive that contains rubber. The bonding period is also longer for products with a loose structure such as polyurethane, silicone or polymers.
Amounts of glue or putty used
A large amount of glue or sealant will take longer to dry. In order to find out how much you need to apply liquid nails to the base, use the instructions for use on the package.
Given the temperature and porous surface of the products, it is recommended to use the adhesive in dry weather. Glue dries faster in the sun. To find out how long it takes for various liquid nails to set, see the instructions on the package.
How to use liquid nails in low temperatures
There are serious doubts about the advisability of working with lumber in low temperatures. For example, when you want to set lags for floor covering. As a result, this leads to what subsequently causes many inconveniences, such as creaking floorboards and cracks.
Here are some tips for working with building materials in low temperatures:
Remove as much ice, snow and moisture as possible from the surface to be bonded. Water in any state prevents the glue from adhering to the surface of the object. And as a result, you will not achieve any effect.
Try to keep the surfaces warm as long as possible while gluing. The fact that the objects will be in warm conditions will help ensure that the surface is better saturated with glue. And the glue will remain sticky and will not freeze.
Liquid nails were designed to provide excellent bonding at low temperatures (about -5°C for bonding rubber).
For best results, choose an adhesive that has been tested and certified by independent laboratories. Liquid nails have a certificate of conformity to standards.
Longevity of liquid nails
It is very important where and how you use liquid nails. Storage conditions significantly affect the quality of the adhesive. Good conditions storing liquid nails will help you use it more efficiently, ensure good bonding and reduce the possibility of poor workmanship.
- To increase the effectiveness of your construction adhesive, follow these guidelines:
- Do not allow liquid nails to freeze. Warming up can take a long time;
- Glue in a cold state does not flow out, and the quality of its work after heating becomes much worse;
- Glue with normal temperature sets faster and better on the surface, this makes your work more productive;
- Do not allow building adhesive to heat up. The maximum storage temperature is about 38°C. If the temperature exceeds the maximum allowable threshold, this may lead to its drying in the cylinder;
- Do not leave a spray can of construction adhesive in the rain and do not allow liquid to come into contact with it. Since most adhesives come in cartons, getting wet can weaken the adhesive. The result will be damaged packaging, dirt, not to mention damaged products and wasted time.
Trademark "Liquid Nails" is designed to solve many problems. Rubber and latex liquid nails can be combined making them suitable for bonding wet surfaces in cold conditions (-5°C).
How to remove liquid nails
Sometimes a situation may arise when you need to separate objects glued with liquid nails from each other - it can be two boards, two bricks, or even two of your fingers. Here are some tips on how to get out of this sticky situation. Remember that liquid nails are specially made for long-term bonding, so this will not be an easy task. You will learn how to remove liquid nails from various surfaces:
How to wash liquid nails from skin
Before washing liquid nails from the skin, check whether the glue can be dissolved and on what basis it is made.
If the glue dissolves:
Gently smear Vaseline or vegetable oil. Repeat if necessary.
Remove impurities and rinse skin thoroughly.
In the event that the adhesive is latex-based:
Wash thoroughly with soap and water.
How to wipe liquid nails from the surface of building materials:
Before you wipe liquid nails from plastic, tiles and other materials, stock up on everything you need. What you will need:
- thin fishing line or wire;
- protective gloves so as not to damage the hands with the wire;
- goggles or protective mask;
- two screwdrivers;
- wire cutters.
What should be done:
- Cut the wire so long that it is half a meter larger than the diameter of the section to be removed;
- Start on one side. Hook the edge of the dried glue into the middle of the wire. Grab the ends of the wire. If necessary, wear protective gloves;
- Move the wire forcefully back and forth. The glue will begin to separate. After the adhesive has separated from the surface a few centimeters, insert a screwdriver into the slot. This is necessary so that the glue does not stick again. Since it becomes sticky when heated during friction.
- Keep moving until the glue is completely removed.
- Remove adhesive residue. If the residue is difficult to scrape off, brush the areas with baby oil, wait an hour and then you can easily scrape them off. Repeat if necessary.
Note: Do not use baby oil or other emollients if you intend to paint the surface in the future. Otherwise, you will have a stain in this place.
Characteristics and method of application of liquid nails moment of installation
Hello dear visitors of our site! Today we will talk about liquid nails "Installation Moment". In addition, we will consider what other products this company produces and what is it in general - liquid nails? Let's find out how much these products cost today.
Description and main characteristics of liquid nails "Moment Installation"
Such construction material, like liquid nails, is used as a universal adhesive for bonding a wide variety of materials. Among the main areas of application of the material, we will single out construction and repair, as well as finishing work.
Legends literally make up the unique properties of glue. So, just one drop of it, applied to the surface, is able to withstand a weight of up to several tens of kilograms in an upright position.
If we compare liquid nails at the moment of installation with other types of glue, such as PVA glue or bustilat, then they hold the surfaces together a couple of times stronger.
Moreover, when using liquid nails, the treated surface does not oxidize and does not corrode, fungi and so on do not form on it.
Drying time for liquid nails
Now a few words about the drying time of such liquid nails. In our case, it can be very different, everything will depend on the specific type of glue, but on average it is twenty five to thirty minutes before pre-setting and about twenty four hours until its final solidification.
But it would be reasonable to note that there are also Moment liquid nails that take less than five minutes to completely harden.
Where is the best place to use Moment Installation glue?
In order to properly clarify the issue and areas of use liquid glue, we should consider in passing what varieties of "Montage" exist today.
So, a series of heavy-duty adhesives that allow you to do without nails, screws, and so on, consists of the following water-based products:
- "Installation Express". It is used for fastening skirting boards, architraves, tiles, decorative elements and wall plaques. Glue is great for children's, and for residential buildings in general. It is odorless and does not require additional solvents. Sufficiently good initial setting strength.
- "Montage Superstrong". This type of liquid nails is used for fastening heavy structures - panels, window sills, decorative elements and door trims. It is also odorless and perfect for use in children's rooms. The initial grasp has simply tremendous power. Glue is able to fill cracks, the thickness of which does not exceed one centimeter.
There are a number of other brands of adhesive that are made from synthetic rubber. This:
- “Mounting Universal”, which, as you may have guessed from the name, is suitable for working with any materials.
- "Mounting Extra strong", used for fastening particularly bulky structures and parts.
- Panel Mounting. Indispensable for fastening panels.
General characteristics of "Installation"
Among common properties, inherent in the entire model range "Installation", you will note the most significant.
- The initial bond strength is extremely high.
- The adhesive is suitable for both uneven and even surfaces, for non-absorbent and absorbent surfaces.
- Elasticity.
- It is possible to edit attached materials.
- Water resistance.
- Surfaces are glued quickly, efficiently and, most importantly, durable.
- Nails are used with almost all known building materials.
Instructions for use of liquid nails "Moment Installation"
So, we figured out the general characteristics, now let's look at how Moment liquid nails are glued correctly.
First stage. Thoroughly clean and degrease work surfaces.
Second phase. We apply glue to the work surface with a construction gun. You can do this in one of three ways:
Third stage. With special density, we press the two surfaces that need to be fastened together, give them the correct location and hold them for two to three minutes.
Fourth stage. After that, we must wait until the liquid nails are completely dry (this is about twenty-four hours), and only after that the surfaces can be mechanically acted upon.
Construction gun for liquid nails
Separately, I would like to talk about the construction gun itself. The fact is that few people know how liquid nails themselves are inserted into it. Moment Installation. So, for starters, we take a tube, a reservoir, as well as the cartridge itself, which contains the actual liquid nails.
We wind the dispenser, which must be cut at the end. Next, we must insert the cartridge into the gun device. For this purpose, we transfer it to its original position, after which we fix a special tongue towards the gun.
Then we pull the rod all the way, insert a special cylinder and use the trigger system to direct the drain ring forward so that the glue can be fed into the dispenser. This procedure must be done until the adhesive work is carried out or until the glue itself runs out.
To remove the cartridge, we again press the locking tab, hold it and at the same time pull the rod towards us in order to remove the empty cylinder from the device.
Pros and cons of liquid nails
Among the advantages of this type of glue, I would like to note the following:
- They do not harm the work surface and are not subject to rust formation.
- They are not only resistant to low temperatures, but also environmentally friendly.
- They harden extremely quickly, regardless of the characteristics of the environment.
- When working with liquid nails, impact tools are not required.
- Connections are characterized by special strength.
- These nails can be glued to any material, regardless of whether it is smooth or rough.
But there are also disadvantages (and where without them?), And the main ones are the following:
- When working with them, it is recommended to use respirators, since for some time after work the material may emit unpleasant odors.
- Without knowing about such nails, it is quite difficult to manipulate them for the first time.
Other Liquid Nail Manufacturers
Among other manufacturers of liquid nails, in addition to the "Installation Moment" itself, there are many good products. So, we can note the LN601 brand from Macco, known for its high performance in interior work.
In general, this is a universal glue, but you can’t use it when attaching mirrors or tiles. But Multi-Purpose, due to its excellent adhesion, can easily be used for plastic, brick, foam.
Solvent Free is great for ceramic tiles because it dries quickly and is resistant to moisture.
If you need to glue a mirror, then the LN-930 is probably the best option.
And, finally, it is better to fix massive structures with Heavy Duty or Zigger 99 liquid nails. Here's another one for your reference.
Moment Montazh liquid nails act as a universal building adhesive for fixing various materials.
Main characteristics
Among the main areas of use of the aforementioned material, one can single out repair and construction, as well as carrying out finishing works. This adhesive has unique characteristics, and just one drop of it is able to withstand a weight equal to several tens of kilograms. You can compare this material with other types of adhesive bases, including bustilate or PVA, the latter options are several times less strong than the first. When using liquid nails, the base does not oxidize and does not corrode, fungi and all kinds of trace elements do not form on the surface.
Drying period
Liquid nails "Moment Installation" have characteristics that must be clarified before use. The master must be aware of the drying time of the composition. Everything will depend on the type of glue, this parameter is twenty to thirty minutes. This is the time needed for pre-setting. Whereas the final solidification occurs in a day. However, some liquid nails cure in as little as five minutes.
Scope of use
Liquid nails "Moment Installation" are used in certain areas. If we are talking about a heavy-duty adhesive that can be used without the use of mechanical fasteners such as screws and nails, then these compounds are used in the operation of skirting boards, tiles, wall plates, platbands, as well as all kinds of decorative elements. This adhesive is excellent for buildings of any purpose, including residential buildings and children's institutions. Liquid nails "Moment Installation" of this type do not have a smell, do not require the use of additional solvents. They have excellent initial grip strength. You can also highlight the glue, which is called superstrong. This variety is used for fixing especially heavy structures such as window sills, panels, door trims. It is also odorless, it can be used in children's rooms and all kinds of institutions where children are most often. The initial grip is truly unique. The composition is able to fill cracks, the thickness of which is 1 cm, but not more. If you decide to use Moment Installation (liquid nails), you should definitely read the reviews in advance.
Range
Many consumers choose these particular formulations due to the fact that they are on sale in a large assortment. So, you can purchase universal glue, which is used most often for the reason that it is suitable for working with any materials. It is also possible to single out a particularly strong composition, which is used to fix structures with significant weight and large dimensions. Liquid nails "Moment Installation", the technical characteristics of which are described in this article, are also represented by a composition that is intended for fixing panels.
Reviews about liquid nails
Among general characteristics, which are characteristic of liquid nails, the most significant ones are marked here. Consumers indicate in their reviews that they pay special attention to the initial bonding strength, which is high for these formulations. Buyers choose this adhesive for the reason that it can be used when working with surfaces that are not particularly even. Among other things, the materials may be absorbent or non-absorbent. The composition is attractive due to its elasticity. After the material has been strengthened with the composition, its position can be adjusted. Masters construction industry pay attention to water resistance, which is very important during the work.
"Moment Installation" (liquid nails), the instructions for use of which should be known to the master before purchasing the product, ensures the durability of the fastened surfaces. The adhesive can be used with almost all known building materials, which is attractive to professional craftsmen.
Instructions for using liquid nails
After we have dealt with the characteristics of the material, we can consider the technology of working with it. Initially, you need to clean, and then degrease the work surface. If you decide to use Moment Installation liquid nails glue, at the next stage you can start applying the composition, it is most convenient to use a construction gun for this. Such manipulations can be performed by the method of forming a snake, dots or a grid. The next step is to press the elements against each other, while you need to make an effort. In this state, the elements should be left for three minutes. Now you need to wait until the liquid nails are completely dry. Only then can the surfaces be subjected to mechanical stress.
Additional consumer reviews about the gun
After you have found out how much Moment Installation liquid nails dry, you can pay special attention to the reviews on the construction gun. Few home craftsmen are familiar with how the tool is charged. According to experts, you need to take a tube, a cartridge, as well as the reservoir itself. Next, the dispenser is screwed on, which should be slightly cut at the end. At the next stage, the cartridge is installed in the instrument, for which it must be brought to its original position, then it is fixed with a special tongue towards the instrument. The rod must be pulled to the stop, and then insert the cylinder and direct the ring forward, using the trigger system. This will ensure the supply of glue to the dispenser.
If you decide to use Moment Installation liquid nails for panels, then these procedures must be carried out before the start of work. In order to remove the cartridge, you need to press the release tab. According to experienced craftsmen, this is quite simple to do. While the tongue is in the retracted state, it is necessary to pull the container towards you, and then remove it from the tool.
Positive and negative sides of liquid nails
If we consider the advantages of the described material, we can mention that it does not harm the working base at all, which means that it is not capable of damaging it or destroying its integrity over time. In addition, the composition does not rust. The material after application perfectly copes with the effects of low temperatures, and is also environmentally friendly. Among the positive characteristics, it can also be noted that the composition freezes in a fairly short time, this is not affected at all external conditions created by the environment. For manipulations that use liquid nails, the use of percussion instruments is not required. The connection will be particularly strong. Such nails can fix any materials, this will not affect the roughness and smoothness of the surface.
However, the adhesive also has disadvantages, the main one being that the master will have to use a respirator when working with this adhesive composition. This is due to the fact that the material in the liquid state is able to emit an unpleasant odor for a certain time. Another disadvantage, according to experts, may be that, without experience with liquid nails, a person may encounter certain difficulties. It will be quite difficult to perform any manipulations that involve the need to glue the elements.
Conclusion
Before you buy liquid nails, you must make sure that you know the technology of working with them. You should not start gluing before you have practiced with the workpiece. Only in this way will it be possible to eliminate errors that can spoil the material, which will entail unforeseen costs. Thus, although liquid nails are easy to apply, it is still necessary to follow some rules for the implementation of work in the process of gluing different surfaces and details.
For some reason, the instructions for using liquid nails are very often ignored not only by beginners, but also experienced craftsmen. This leads to damage to the bonded surfaces or contact with the skin. To avoid such troubles, you should carefully study the rules for using glue.
Liquid nails - areas of application of the material
The composition is a special mounting adhesive material that is used by professionals in construction and other fields. It differs from the closest analogue (glue Moment) by its composition. Glue liquid nails consists of a large number of fine-grained fillers, which together guarantee a reliable setting of two or more surfaces. After gluing with liquid nails, the product is able to withstand fairly large loads.
If the initial plasticity of the composition is very small, then to increase this indicator, a certain amount of white clay can be added to it. True, after this, the fixing force of the material will decrease slightly.
Liquid Nails
The composition was first used in 1968 for gluing two wooden partitions. After that, the material was improved, as a result of which the glue began to better hold massive products. Nowadays, a composition such as liquid nails Moment Mounting, used in the construction industry to work with a variety of objects. Because of this, often this material and its analogues are called universal glue. In most cases, glue is used to work with such materials:
- wood;
- drywall;
- plastic;
- glass and plexiglass;
- aluminum;
- natural cork.
In certain cases, adhesives even play the role of sealants. Using them, you can qualitatively seal bathrooms, windows, door frames and some other products widely used in construction industry. In addition to the construction industry, liquid nails are widely used in repair work. Often they are used for gluing wallpapers made of bamboo or other heavy woods. For pasting, you need to apply glue to the back of the finish, attach the wallpaper to the wall and lightly tap it with your hand.
After that, it is very important not to forget to remove the trim and wait for the glue to dry. After 5-7 minutes, the wallpaper can be put back. Of course, part of the composition will come out from under the slats. However, it is not necessary immediately, it will be much easier to do after it dries. Liquid nails can also be used to install ceramic tiles. At the same time, the reliability of fixation will be even higher than when using traditional tile compositions. However, not everyone can afford to use glue instead of tile sealant, as it is quite expensive.
How to work with the composition - the correct algorithm
Before using liquid nails Moment Mounting, be sure to read the instructions for use. This will save time and get the job done with maximum accuracy. Before starting to apply the adhesive, the work surfaces must be cleaned and thoroughly degreased. As a result, the coating must be completely free of dust, grease or dirt. Surfaces must be dry. To apply glue, use a special gun. It will make the job go faster.
How to apply liquid nails
Depending on the texture of the coating, it is necessary to apply the composition in dots or thin strips located separately from each other. Immediately after that, attach the surfaces to be bonded to each other and press firmly. If you are working with massive products, then you can use a wooden or rubber mallet to fix it. However, if you are using liquid nails to glue wood, then it is better to do without impact tools so as not to damage the structure of the wood.
After gluing, you will need to wait. If you glue wooden or plastic surfaces, they will grab within 10 minutes after applying the composition. In the case of aluminum surfaces, you will have to wait more than 20 minutes. At the end, you need to remove the remnants of the drying glue. Acetone or any other solvent will easily cope with this.
The main pros and cons of adhesive compositions
Liquid nails, the instructions of which we studied, like any other building material, have their advantages and disadvantages. It is also worth familiarizing yourself with them, and it is better to do this before buying glue. Among the advantages of the material, one can note its absolute safety in relation to any work surfaces. Using the composition, you can not worry that rust will form on the coating in the future. Glue also does not harm human health, it perfectly tolerates temperature changes and humidity surges.
Liquid nails for flooring installation
Another advantage of the composition is its rapid solidification. Because of this, glue has gained popularity not only among professional builders, but also among amateurs. In the process of applying the composition, it is not required to use percussion instruments such as overall sledgehammers. You only need a mallet, and then only when working with large products. One of the main advantages of liquid nails is the strength after gluing. Any of the above materials will be reliably and for a long time held on the base. Even when working with rough coatings, the adhesive will show itself as a reliable fixative.
The disadvantages of the composition are much less. However, they are still there, and their study should not be ignored. The first of the minuses is considered a sharp unpleasant odor. Because of him, the masters are forced to wear respirators. This is especially true when working with the composition for a long time. The second disadvantage is inconvenience for beginners. If this is your first time working with liquid nails, then before applying it is worth practicing with those coatings that are not a pity.
Use with wood materials
Separately, it is worth talking about water-based liquid nails. This glue also has an unpleasant odor and is not recommended for use on metal. In addition, the composition is strongly destroyed when exposed to low temperatures. In order for the glue to dry faster, you need to use special heating. Otherwise, you will have to wait a very long time.
Material properties - why is glue so popular with builders?
Liquid nails have found their application in various areas of construction for good reason. This composition has excellent technical characteristics, thanks to which it stands out noticeably among other similar materials. First, the glue has increased level strength. After the final hardening, it can hold two steel sheets for years even when exposed to various weather factors. Secondly, the composition has excellent adhesion, which has a positive effect on the setting time of the two surfaces to each other.
Thirdly, the adhesive resists corrosion well. This is especially important when working with metal profiles and aluminum sheets. Fourthly, due to its composition, the material does not adversely affect the coating and does not corrode it. Among the properties of the adhesive, one can also highlight the ease of its application. Even a beginner can apply the composition, having previously trained on an unnecessary product. It is also worth noting the cost-effectiveness of the composition. One can of liquid nails will last for a very long time. Even for gluing objects weighing 25 kg, a few strips of the composition are enough.
Cleaning the surface of liquid nails - a note to beginners
Having understood what liquid nails are, and having studied their technical characteristics, we will consider how to remove stains of the hardened composition. In any case, cleaning skills will come in handy, because glue is widely used not only in construction, but also in minor repairs. To quickly remove the stain, you will need:
- solvent;
- special cleaner;
- scraper;
- water;
- sponge.
In the event that you have recently discovered a stain, and it has not yet had time to dry, it will be enough to remove it warm water with a few drops of mineral solvent diluted in it. This mixture is quite effective and safe for most types of finishes, from lacquered wood to gloss.
If the stain has had time to completely harden, then a stronger cleaner will be required to remove it. It can be purchased at any building supply store. Having prepared the product, you need to dip a sponge into it, attach it to the glue stain and hold it for 20-30 seconds. Next, put the sponge aside and begin to rub the stain with a scraper. This must be done very carefully so as not to damage the surface. Also, do not forget that it is necessary to dip the sponge into the cleaner only after putting on gloves. Do not squeeze the sponge with your hands, trying to squeeze out the cleaner from it, otherwise it may splash into your eyes.
Please note that although liquid nails can withstand temperature extremes, they do not tolerate exposure at all. sun rays. This can be used when removing a frozen stain. Before applying the cleaner to the coating, place the soiled product under the sun and leave it there for several hours. After that, you can apply a sponge with a cleaner and scrape off the glue.
The best brands of glue - we select the composition for certain materials
Certainly, helpful tips Instructions for use of the adhesive can be found on its packaging. But what if you came to the store and you need to choose an adhesive that is best suited for a particular material. Not all sellers are competent in such matters. Therefore, it is worth considering the highest quality formulations that have proven themselves well in certain cases.
One of the most popular compositions among buyers is considered Extra Strength Moment Mounting company production Henkel. It is a good glue that is suitable for fixing heavy kinds facing materials: natural stone, wood, metal siding. But if you use materials such as polystyrene for work, then this glue will not work for you. In such situations, it is worth buying a composition Super Strong Moment Montage made on a water basis. Do not forget that liquid nails of this type are not suitable for Teflon and polyethylene.
For work inside the house unrivaled composition LN601 from the manufacturer Macco. This neoprene backed adhesive is great for many construction and renovation jobs. It glues plywood equally well, natural wood, chipboard, metal and plastic moldings. However, this composition will not be able to cope with the installation of ceramic tiles and mirrors. Because of this, it makes no sense to buy it for bathroom renovation.
Another glue that will become a reliable assistant in the repair and construction is the composition Multi Purpose Russian company Titebond. It is also made on a neoprene base and is suitable for wall cladding with metal, plastic, wood, fiberboard, chipboard and ceramics. Due to good adhesion with brick and concrete walls this adhesive holds even the heaviest finishes. The only area where such liquid nails are not used is pools. In addition, it is not suitable for working with polystyrene.
Specialists often have different opinions about which adhesive can be used when working with certain materials. Based on the words of the pros, water-soluble quick-drying compounds are ideal for mounting ceramics. Titan WB-50 or Solvent Free. They perfectly tolerate the effects of mild vibrations and moisture. For the purpose of gluing mirrors, adhesives that do not include substances that dissolve amalgam will be optimal. Among them it is worth highlighting LN-930 And Zigger 93. When repairing a bathroom, it is recommended to use compositions with increased resistance to moisture. Among these stand out Nail power And Tub Surround.
