Beautiful pictures of flowers from kapron. Kapron flowers: a detailed master class. Step by step photos of making hydrangeas

To make a gladiolus, you need to take:

Red nylon
Green nylon
bunch of stamens
flower wire
red wire
green wire
Scissors and cutters
Bar and paste from a wire winder

To make a peach branch, you need to take:

Light pink nylon
Pink or reddish nylon
Cotton wool for stuffing buds
stamens
floral wire
Brown floral tape
Pink wire 0.5 mm in diameter
Wire winding bar
Scissors
wire cutters

It is not at all difficult to create flowers from nylon and wire! To do this, you need a desire, an idea and all the necessary materials. Everyone can learn, because it's quite simple.

http://vrukodelii.com/gladiolus-i-persik/

Bouquet of daisies from kapron

Such a juicy and delicate bouquet can be made from nylon tights and multi-colored wire. Try yourself in this kind of needlework, it's so easy!

To make these flowers, you need to take:

Kapron of the required color
Wire in the color of nylon
flower wire
Scissors
floral tape

Manufacturing step by step guide:

Purple lily from kapron

Incredibly beautiful flowers worthy of your attention. I think that such a bouquet can be a wonderful gift or addition to the interior in your cozy room.

The necessary materials for a lily are exactly the same as those for a chamomile, but you will also need stamens.

If you couldn't find desired color nylon, you can dye white with food coloring or a special one for fabric. You can also use printer ink.

Lily making master class:

Beautiful rose made of nylon

Such beautiful flowers can be made not only from their special multi-colored nylon, but also from your old nylon tights. But white nylon can be painted in any desired color!

To make such a rose, you need to take:

Capron red and green
Wire red and green, diameter 0.8-1 mm
flower wire
green floral ribbon
wire cutters
Scissors
Winding bars
Pen paste

Making a rose from nylon and wire

1. This rose consists of one middle petal, two petals 3 cm wide, 3 petals 3.5 cm wide and 5 petals 4 cm wide. Wind a piece of wire around a bar, which will give the wire a round shape, twist, making the basis for the petal. Cut off a piece of nylon, pull it over the base and tie it at the base with threads. in the same way, make all the other petals you need width.

2. Take the flower wire, make a hook on one side and wind the central petal to it, twisting it into a tube. imitating the growth of rose petals, attach all the petals one by one, winding them to the stem with thread or wire.

3. You also need to make a rosebud according to the same principle, but the arrangement of the petals will be different. The bud consists of three petals. From green nylon and wire, make a sepal and insert a bud into it. The rose must also be placed in the sepal.

4. Now make some green rose leaves. To make the sheet with a wavy or ribbed edge, wind the wire first on the paste from the handle, and then on the bar. Rose leaves grow on branches of three, so you need to make 2 branches and only 6 leaves. At the end, screw all parts of the rose to the stem and wrap the stem with floral tape.

http://vrukodelii.com/kapronovaya-roza/

Beautiful red nylon flower

How can you decorate your home? Add comfort and harmony? Pay attention to this amazing flower made of wire and nylon. In fact, the whole manufacturing process is much simpler than it seems. If you have not yet found a hobby to your liking, then you should try making flowers from nylon tights. I think you will like it!

Capron red, green and white
Red and green wire
Ruler
Threads with a needle
flower wire
wire cutters
floral tape
Paste from the winding pen

Step by step manufacturing

1. We begin work with the manufacture of a petal of three tiers. The diagram below shows in detail how to make this petal, as well as in the photo.

2. The middle consists of a red nylon, which is dressed on a flower wire hook and wrapped with threads.

3. Attach five petals to the finished center and fasten them to the stem.

5. Now make a few buds from cotton wool, wrap in green nylon and sew with threads.

6. And in conclusion, the assembly is underway. Three green leaves, 7 buds, one flower must be fixed on the stem as shown in the diagram above. At the end, wrap the leg with floral tape.

Well, the nylon flower is ready. Happy needlework!

http://vrukodelii.com/tsvetok-iz-kaprona/

Step-by-step master class for making a bouquet of flowers from nylon

The most beautiful bouquet blue flowers what each of you can do. Having carefully studied step by step guide, you can understand how to make beautiful flowers from nylon tights with your own hands.

Required materials and tools:

Capron blue, blue and green
blue and green wire
green floral ribbon
Scissors
wire cutters
flower wire
Wire winding molds
Ruler

Visual master class

Measure the wire to the desired length for the desired petal size. Give the shape of roundness with the help of the form, twist. Lift the remaining long end of the wire to the top and make a jumper, bend it and go back down again. Twist. Now put on a piece of nylon, pull the leaf over the frame, tie it with a thread at the base of the leaf.

Thus, you need to make six pointed petals for one flower. Now take the flower wire, make a hook on one side and wind three blue petals around it, and then three more with an offset so as to repeat the growth of the petals of a living flower.

Next, wrap the leg with floral tape. It is also necessary to make green leaves, but they are much simpler, since there are no jumpers. It is better to pre-cut the required number of wires of the same length and the same pieces of nylon.

Make a few of these blue and blue flowers, assemble them into a composition and arrange a bouquet using dried flowers and other suitable materials.

http://vrukodelii.com/goluboy-buket/

Hydrangea flowers made of nylon and wire

This unusual flower consists of many small inflorescences that form a ball. Great indoor flower, which will easily fit into the interior of your room and complement it with bright colors.

To make a hydrangea, you need to take the following materials:

Capron pink
Capron green
Pistils (middle) 22 pcs for one hydrangea
pink wire
green wire
green floral ribbon
flower wire

If you do not have pink and green nylon, you can take regular white nylon tights and dye them in the colors you need.

1. We take the wire, give it a round shape using any suitable form(it can be a marker, a pen or something else). We pull the capron onto the wire, tie it with threads. So you have one petal ready, in total you need 4 of these for one inflorescence, and for a finished hydrangea you will need 22 inflorescences. Easy to calculate: 4 x 22 = 88 petals.

2. Now we take the flower wire, attach the pestle to it, wind it with threads.

Step by step photos of making hydrangeas:

4. And now we need to form a ball-shaped hydrangea from 22 inflorescences. In the diagram above, in the lower left corner, the location of the rows of inflorescences is indicated. The first row consists of one in the center, the second of six around, the third of nine and the fourth of six.

5. Wrap each inflorescence with floral tape and start assembling according to the scheme.

6. Now take the green wire and green nylon. To make the future sheet with a wavy edge, wind the wire around the paste from the handle. Flatten and shape the leaf with a suitable round shape. It can be made from cardboard, just roll the cardboard into a tube and glue it together. In the future, when working, you will often need such templates of different diameters.

7. Pull the nylon over the wire, tie the base with a thread, put it on the flower wire, wrap it with floral tape. Attach the leaf to the stem of the flower. Now hide everything unnecessary under the floral tape so that the leg is green and even.

If you wish, you can make several of these hydrangeas and plant them in a pot. happy creativity!

http://vrukodelii.com/gortenziya/

Aster from yellow nylon

How many varieties of asters are found in nature. Astra from kapron will perfectly add to this list, as it looks really natural and all that remains is to smell it.

To make an aster, you need to take:

Capron yellow
Capron green
Wire yellow and green
flower wire
green florenta
Wire winder paste

Step by step images of the aster making process:

This uncomplicated flower consists of oblong yellow petals. In total, you need to make 7 smaller petals and 18 more. Each petal must be curved and fastened around the middle.

The middle one is just as easy. A piece of yellow nylon is taken, folded, put on a floral wire and wrapped with threads. Excess can be cut off and give a beautiful fluffy shape to the middle.

Now we begin to form an aster. Around the middle we fix three small petals, the second row of four small petals, the third of seven larger ones and the fourth of eleven larger petals.

Decorate the stem beautifully with leaves, wrap the cup with green florentine, and the leg in the same way. Put the flower in a vase and enjoy the beauty and the work done.

http://vrukodelii.com/astra-zheltaya/

Master class for making roses from nylon tights

One of the most beautiful flowers is the rose. She has a magical beauty that draws attention to herself. Quite quickly and simply, you can make beautiful flowers from wire and nylon with your own hands.

Necessary materials for work:

Kapron yellow
Capron red
Capron green
stamens
Red wire
green wire
yellow wire
floral tape
flower wire
Wire 1 mm for stand
Wire winding mold
Rod from the handle for winding wire

Step by step schemes of work:

1. We begin work with the manufacture of leaflets from green wire and nylon. To do this, take the core of the pen, wind the wire around it, then straighten the wire and give it a rounded shape using a round handle from any tool that you find at home. As a result, the sheet should be 4 cm across, then give it a pointed shape as in the diagram above.

2. Wrap the wire with nylon, tie it at the base with threads, after putting the leaf on the flower wire and wrap it with floral tape to hide everything superfluous.

3. Now we make out the middle. To do this, a bunch of stamens is folded in half, put on a flower wire hook, wrapped with threads.

4. Make 8 red and 8 yellow petals (for two roses). Place three petals around the stamens, secure and place 5 more petals in the next tier. Secure with thread, and then wrap the leg with floral tape.

5. Form a bunch of three green leaves, attach it to the stem of the flower. From dense wire, make a spiral stand, also wrapped in green floral tape.

http://vrukodelii.com/roza-iz-kaprona/

Great poinsettia for Christmas!

It is impossible to imagine that this Christmas wreath is made of nylon and wire! Very simple technique manufacturing will allow for a short period of time to make such a nice gift to your family and friends.

To make a wreath, you need to take:

Capron red
Capron green
Capron light brown and yellow
Red, green and gold wire
piece of elastic material
flower wire
Base for a wreath
floral tape

Scheme for the production of work:

1. Let's start from the middle of the flower. to do this, you need to tie a piece of fabric to the floral wire, which must be wrapped in yellow nylon. Each center consists of three such balls. In the center of the green bundles of leaves, such balls are also located, but in red.

2. Now make the petals for the poinsettia and the green leaves for the bunches. The manufacturing principle is shown below. Visual photos will help you understand a simple technique. For each flower, make 6 red petals, and already form green bunches in free form.

The photo above shows a leaf with a center in the center; for green poinsettia sheets, a simply rounded wire shape without central inserts is enough.

3. Wrap the flower stem with green floral tape.

4. Now we make a bump. The diagram shows that the cone consists of eight rows of round petals. To the bottom, their size increases from 1 cm to 3 cm. Each row consists of four petals. Collect the bump from small to large petals, securing everything with wire or thread.

5. When all the components of the wreath are ready, fasten the flowers, bunches and a cone to the base, which can be decorated with ribbons or rain.

That's all. Christmas composition is ready. Hurry up to please and surprise your loved ones with pleasant gifts!

http://vrukodelii.com/puansetiya/

Original entry and comments on

Any girl, girl, woman in the locker has such a thing as nylon tights. This is a necessary element of our wardrobe. But, unfortunately, they quickly become unusable. Any small puff, a small arrow - and now, until recently, new tights are in the trash can.

Have you thought about how else you can use the materials we are used to? Anything can be given new life. So with the help of damaged stockings or tights, you can make beautiful, original flowers for jewelry, interior decoration, and just for fun.

To make flowers from kapron with your own hands, you do not need special knowledge and skills. Enough to stock up the right materials and take advantage of these tips.

What materials will be needed?

capron;
wire;
scissors;
threads;
templates (cylinders);
pliers / round nose pliers;
teip tape;
glue gun.

Where to begin?

You can take either your unusable tights, socks, stockings. Or buy capron in the store. It can be monophonic, with gloss, two-color / three-color. To get started, you can purchase a small piece measuring from 50 cm. If you use your own tights, then you can tint the nylon with acrylic paint to give the desired shade.

For the frame, you will definitely need wire. For different elements of the flower, different types of wire are needed. For example, for harvesting a stem, it is worth taking floristic wire. Its rigidity is enough for the workpiece. It can be covered with a paper layer or plastic. To design the details of the flower, you need to take a wire from nylon. She is more flexible.

To cut the wire, of course, you will need sharp scissors. Pliers / round nose pliers can be useful for fixing and twisting the wire.

You need templates (any, cylindrical shape) for the convenience of creating the desired flower shape.

Teip tape, green or brown, is perfect for decorating stems, for tying elements together.

Beads can be used for the core of the flower, it looks very beautiful and decorative. There are also prepared stamens on sale. Threads are best taken according to the color of the product.

Stages of work

Try to create a simple flower from kapron:

First you need to make blanks. Twist the wire in the shape of a small oval (you can wind it with a cylindrical template) This is your future petal.
Give the desired shape to the petal. Make some of these petals.
Pull the nylon over your workpieces and fix with threads. You can paint the petals with acrylic, gouache.
For the core, use a nylon of a different color, or decorate with beads. You can also buy ready-made plastic stamens in the store.
Connect the elements of the flower with a glue gun.
You can leave the flower in the form of such an ornament as a brooch. And you can attach a stem. You can decorate it with teip tape or decorative floral paper.

The product is ready. If you wish, you can find a wide variety of lessons and master classes on the topic of creating decorative flowers and decorations. After spending the evening creatively, and seeing the result of your work, you will certainly want to continue. You will be amazed at how many amazing and diverse things you can create with your own hands.

Flowers from kapron with their own hands. Master class with photo

Flowers from nylon tights. Master class with step by step photos.

Stepanyuk Olesya Aleksandrovna, educator, MOAU secondary school No. 4, Shimanovsk, Amur region
Master class is designed for children school age, teachers, parents, leaders of circle associations.
Purpose: interior decoration, making gifts for Mother's Day, March 8, birthday.
Target: production of flowers from kapron.
Tasks:
- teach how to work with kapron;
- develop imagination, fine motor skills of hands;
- cultivate accuracy, aesthetic taste, perseverance.

The custom of giving flowers to each other for the holidays has long been part of our lives.
At all times, flowers remain a wonderful addition to any gift. By themselves, they are also a bright gift. To make a gift to your loved ones, you can create a bouquet with your own hands, putting all your love for a person and imagination into it.
Today I bring to your attention another master class on creating flowers from nylon, which will delight you and your loved ones.

The language of flowers was born in the East...
It was created by women, loving.
They wanted bright delights
Give to your loved ones, sparing no colors ...
If you are sad today
Primrose will quench sadness.
Phlox will fill you with secret power,
And the sunflower will shine with the sun!
If the hour of goodbye comes,
The bell will announce the time.
Forget-me-not refreshes memory
And the immortal keeps kindness.
Snapdragon stands for glory
Cornflowers - trust and shelter.
On a chamomile you tell the truth,
Rose generously gives us love ...
Lily of the valley brings us renewal.
Lily gives us purity!
Daisy gives inspiration
A carnation - passion and sharpness ....
How many beautiful, bright flowers!
How many secrets do they keep?
Let them be more - tender, hot.
Let us give all the flowers in a row!

Materials:
templates for creating flowers
flower wire No. 24
teip - tape (dark green)
synthetic winterizer or cotton wool
floral wire (2 mm)
capron (blue, green)
threads (preferably in tone with nylon)
pliers
fishing line
ball plasticine
scissors

Work process:

1. We wind the wire for flowers around templates No. 4 and No. 1. Screw in with pliers. Leave about 2 cm of wire. For one flower, we need 6 large and 5 small blanks.

2. Give the blanks a shape, cover with a nylon of the desired color, secure with a thread, wrapping it several times. Cut off the excess capron with scissors.

3. Take 3 large and 5 small petals and give them a curved shape.

4. Now we make stamens. Cut a thick fishing line 6-7 cm long. Form balls from ball plasticine and fasten on both sides to the tip of the fishing line. Be sure to let the clay dry.

5. We collect the core of the flower. Wrap a synthetic winterizer on the floristic wire and cover it with nylon in several layers. We fix each layer with a thread. We give the shape by hand according to the plan. Add stamens and secure with thread.

6. When all the details are prepared, we proceed to assemble the flowers.
To the finished core, with the help of a thread, we fix the first three curved petals.

7. Attach the remaining 3 petals between the petals. Add 5 green ones and wrap the stem with teip tape. We give the shape of the petals at our discretion. Here's what happened.

8. We collect a branch with the help of a teip tape. We make unblown buds in the same way as the core, but do not add stamens. Their green petals are smaller than those of the flower.
We make flowers different sizes. Make some branches.

We put it in a vase.

Don't forget to send flowers for no reason. Remind your family how much you love them.
Thank you for your attention!

So good known to women material like kapron is made from synthetic polyamide fiber. Nylon socks, stockings and tights have not lost their popularity even today.

Despite the obvious advantages of nylon products (strength, comfort, elasticity, retain heat well), stockings or tights often cling to miscellaneous items and become unusable when even small puffs, unpresentable arrows appear. Surely in one of your drawers for linen you can find several of these damaged tights and nylon stockings.

Do not rush to throw away your nylon gizmos in the trash, in which you will never and never dress your lovely legs! They have served their time, but they can be given a second life!

Kapron for assembling flowers.

There is a wide selection for sale. different types nylon fabric. You can purchase a piece of the desired length. As one of the characteristics of capron, manufacturers indicate the length in the stretched state on the label.

This material can be monophonic, monochromatic with a sheen, multicolor (two or more shades of canvas). You can choose the right colors for making crafts with your own hands from nylon.

Let's not forget about such a great opportunity as the use of old nylon stockings and tights for making flowers. In addition, the material from this women's clothing can be easily tinted with acrylic paint and give the desired shade (the easiest way is to paint in the desired color a nylon piece of flesh or white color).

Wire for forming a frame.

It is very easy to give the desired shape to the petals and leaves of the flower from thin copper wire.

To make a stem for a flower you can choose floral wire in paper or plastic sheath. It is quite rigid and easily processed with improvised tools.

In specialized stores offering products for florists, you can buy flexible and durable nylon wire. This wire is also great for forming flower details.

Tape.

An excellent material for the formation of transitional elements of kapron crafts. When folding a flower, use a tape tape of green and brown. Brown color harmoniously looks on twigs, trunks of bonsai or topiary with flowers. A green color appropriate at the points petal connections , sepals, leaves on stalks. We advise you to store the tape in a dark, cool place, laying it on a slightly damp soft towel in a plastic bag.

Tools and materials for making a flower from kapron.

Sharp scissors, round nose pliers, pliers, tweezers, glue gun, templates (cylinders of different diameters for winding wire), cotton wool, strong threads for the main color of the flower.

2. INSTRUCTIONS FOR ASSEMBLING A FLOWER FROM KAPRON

If you know how to fold flowers from organza, rep or satin fabric , you will be able to apply the acquired skills in making beautiful crafts like nylon bouquets. The only important difference is that it is difficult for nylon petals or leaves to give the desired shape and therefore this material is stretched over a wire frame.

- The wire frame is twisted using a cylindrical template of the desired size. Then this ring is given the desired shape - petal, leaf, sepal.

Then a piece of nylon is pulled onto the wire frame and fixed with threads.

The stem of the flower can be decorated with teip tape or floral paper.

3. MASTER CLASSES WITH A PHOTO ON THE MANUFACTURING OF DIFFERENT KAPRON FLOWERS

Master class number 1:

HOW TO MAKE A BOUQUET OF LILYS FROM KAPRON TIGHTS AND FLORAL (You CAN TAKE ORDINARY COPPER)) WIRES. STEP LESSON WITH PHOTO.

Master class number 2:

ANOTHER OPTION OF MANUFACTURING A LILY FROM KAPRON AND WIRE. WHAT MATERIALS AND TOOLS ARE USED IN THE WORK, DESCRIPTION OF THE STAGES OF ASSEMBLING THE FLOWER, PHOTO.

Master class number 3:

GREAT IDEA FOR QUICKLY MANUFACTURING A BEAUTIFUL FLOWER FROM WIRE AND OLD Nylon Stockings. STEP-BY-STEP PHOTO MK.

Master class number 4:

Svetlana Chelyadina

I offer a master class on making flowers from nylon.

Purpose: flower arrangements made of nylon can be a very unusual and original gift for any occasion, as well as decorate home interior to make it more comfortable.

Target: teach how to make voluminous flowers from nylon.

Tasks: teach how to work with capron; develop creative abilities, fine motor skills of hands, attention, memory, imagination; to cultivate accuracy, interest in working with nylon, aesthetic taste.

Any person who longs for beauty can make beautiful flowers from nylon, decorate the interior or make a gift to his family and friends. Having delved into all the subtleties and tips, as well as using the detailed step by step instructions, you can create air bouquets of flowers.

The creation of flowers from nylon can be divided into three stages - the manufacture of a bud, the creation of flowers, the manufacture of leaves and, in fact, assembly into a finished product.

Well, let's get to work.

For work you will need

Patterns for creating flowers from nylon

Wire for flowers from kapron

Floral wire for stem

Nylon for flowers (pink, m/b and other color)

Tape herbal

Pliers, cutters

Threads to match nylon, scissors