Drawing of a coffee table with dimensions from chipboard. A DIY coffee table is a creative design for decorating your home interior. Materials for manufacturing

Even a novice master can make a table from improvised materials. But before assembling a coffee table with your own hands, it is better to view the drawings and diagrams in advance. This will allow you to decide on the shape of future furniture and cut off too complex options.

Do-it-yourself drawings and diagrams of coffee tables

It is comfortable, lightweight and versatile. For the rigidity of the frame, the underframe is assembled from legs and a drawer - a rectangle connecting the legs and supporting the tabletop. Otherwise, the legs will move apart and the table will lose its stability.

At the same time, the complexity of the assembly does not increase much, but now you can store books, notebooks or other trinkets in the coffee table.

A feature of this design is the absence of legs - they are replaced by four sidewalls, to which a ready-made folding mechanism is attached from the inside. To it, on a short pair of supports, a wide board is fixed - the underframe, and a double tabletop is attached to the high supports, which, in the unfolded version, rests on the underframe.

PVC pipe magazine table

The simplest and most economical, but very original version coffee table - make it out of plastic pipes. The shape and height depend only on the wild imagination. It can be a small round table that functions as a bedside table or a full-fledged coffee table with a glass top.

To create it you will need:

• pipes of two diameters - thicker for the legs and narrower for the underframe, for example, 16 and 9 mm;
• glue gun or a tube of transparent superglue;
• medium grit sandpaper;
• hacksaw for cutting plastic pipes (can be replaced with a saw for wood);
• acrylic paint to hide the printed markings on the pipes.

The process itself is simple to disgrace:

1. Cylinders of the selected length are cut. 4 legs are made from a thick pipe - their length will be equal to the height of the future table (40-50 cm). 30 short cylinders are cut from a narrow pipe, on average 10-15 cm (depending on the shape of the table, the number can be changed).
2. You need to start assembling the base from the center - so there will definitely not be large gaps between the cylinders. Glue is applied to the entire surface of the adjacent pipes. A little trick - to accurately glue the cylinders, liquid superglue is poured from the end of the pipes so that it stacks down the entire length of the joint. With a glue gun, the joints are simply processed from the outside - after painting they will become invisible.
3. When the desired shape is reached, the legs are glued - you need to make sure that the diagonal distance between them is equal. Otherwise, the table will fall on one side.
4. The final step is painting. The easiest way to do this is with an aerosol method, although you can also use a simple paint brush.

When laying a glass top on your table, you should choose tempered glass with a thickness of 10 mm. To prevent the removable tabletop from sliding on the base, use silicone shock absorbers for furniture.

If a non-removable countertop is planned, it is fixed with transparent silicone glue.

Assembling a wooden coffee table with your own hands

For admirers classical style there is nothing better than a wooden table. For him, you need to stock up:

• planed bar 40x40 mm - for legs;
• planed board 50x20 mm - for the side;
• a finished worktop made of furniture board 800x400 mm (but MDF or plywood is also suitable);
• putty for wood - overwrite holes from self-tapping screws;
• sandpaper or a grinding nozzle on a drill - process wood;
• varnish or paint - for finishing table.

Of the tools you will need a screwdriver (or screwdriver), a saw for wood and a drill. After cutting the bar into legs, and the boards into the drawer side, the assembly of the table itself begins:

1. The underframe is assembled first. For convenience and ease of assembly, everything is done upside down. The sidewalls to the legs are attached obliquely with self-tapping screws through a pre- drilled holes. But you can also use metal corners if aesthetics are not so important.

Wooden tables are not only made from planed wood. With minimal woodworking skills, you can create original furniture even from firewood. For example, picking up a wooden block of suitable height and a pair of U-shaped thick branches, working a little with a grinding nozzle and varnishing everything, you get an excellent massive coffee table for a summer residence.

And if after the construction of the house there are several euro pallets left, there is no need to rush to dispose of them. It's almost a finished table!

It is enough to grind and stain the surface, put them one on top of the other and securely connect them together. And to make the table mobile, 4 wheels are screwed from below, 2 of which are with brakes.

Decorating a coffee table with epoxy resin

If there is a sawmill nearby and there you can get a sawn board with a lot of defects for a pittance - just great! It is from such materials that the most beautiful tables are obtained, decorated epoxy resin.

The process is time consuming but not overly complicated:

1. The cut board is glued with wood glue into the countertop. Flat boards must be placed under the clamps - for uniform fixation.



2. After the glue has completely dried, the tabletop is polished, all cracks and holes from knots are cleaned. Before applying epoxy, the surface must be cleaned of dust and small chips.



3. To make the table glow effectively, use luminescent paint in powder. For 2 l ready solution resin need about 100 g of paint. Resin and hardener are mixed 1:1, the dose should be measured accurately and so that the hand does not flinch. Too much hardener will cause the resin to crack, while a lack of hardener will delay the curing period.

Such a tabletop is suitable for a coffee table in the living room of a cottage, and in the bedroom of a city apartment.

If there are several meters of wooden bars left at home, you can even make a table out of them! The video shows in detail and clearly how to make unusual designer furniture from building debris:

It's hard to be a fan design solutions for home furniture, while not having enough free funds to buy them. The point is not only in the level of your income, but also in the price tags that are characteristic of such furniture, because they are often several times higher than for traditional options.

You can solve this problem by making a coffee table with your own hands. You will be pleasantly surprised to learn how easy and fun it can be.

low table

Most often, this option is found among coffee tables. They are not new, they just started getting more attention from the public lately.

They gained popularity two centuries ago, when tea lovers, the British, began to use them. A hundred years later, this trend has spread to other countries of the world, including ours. Now this is not a very popular option, however, having the right to life.

Chipboard table

A simple and quite practical option can be a chipboard coffee table, which you can make yourself without any problems. Now in the furniture market, chipboard is one of the most available materials, which can be used to create a traditional table. Why traditional, we will talk later.

The price tag of this option will be significantly lower than if your choice falls on a wooden coffee table. It is best to take sheets coated with laminate or varnish. Nevertheless, you will put such a table in your house, and therefore you need to pay attention to the aesthetic component.

Further, everything depends on the design you choose. Simple, at the same time, a small table can be made from several parts. This option will be small and with several shelves. Perfect for the living room, and will stand near the sofa or armchair.

Shelves are well suited for magazines and remotes for controlling equipment. This reduces the chance of them getting lost.

glass table

Drawings of such coffee tables can be easily found on the Internet. Only one feature needs to be taken into account - in almost any case, you will need to buy a glass part of the table. You can also solve this issue with the help of old glass, which can be in your barn or garage.

The main part of the table can be made from the material that suits you, and cover it with a sheet of glass on top. To do this, you need to cut it in shape, then process the edges and fix it on the main structure.

Even if you do not make such a table entirely of glass, with the exception of the frame, you can get a very attractive and interesting result that will look good both in modern interior, and in the usual design of apartments without any features.

Wooden table

Enough detailed instructions how to make a coffee table out of wood can be found on the pages of thematic magazines. This option will be more expensive than in the case of chipboard, but at the same time appearance everything pays off. This material is best suited for tables large sizes, for which, if necessary, you can work or use them to store documents that you view while sitting in front of the TV in the evening.

The design can be tritely simple: four bars for legs, which are complemented by a table top of the desired shape. Depending on the latter, you can take three legs, which will look even more interesting.

On top of this, you can add various decorative and functional details - whether it be shelves or some kind of decoration. Here you can give freedom to your creative nature.

Unusual table options

You could often see photos of coffee tables that are made from unusual materials. These can be safely attributed to a table made from an old suitcase.

The most interesting thing about this is that you will practically not have to do anything to create such an item. It will be enough for you to do the restoration of a pleasant appearance, if necessary, and the installation of such a table.

A huge advantage of this solution will be the reasonable use of space in the room. Well, this will be in front of the sofa, while the space inside the suitcase would also be good to use. There you can put some kind of blanket, or boxes of shoes. In general, here the matter is already behind a personal choice, in any case it is very convenient and practical.

Table from improvised materials

Separately, I would like to consider a coffee table made by hand from improvised materials. There are several options that I really liked, and I want to share them with you.

The first is a pallet table. They can be found in any supermarket or warehouse, and therefore it will not be difficult to get them. They are made of wood, which is very good for the interior. This tree can be varnished, which will greatly change its appearance.

Take two such pallets, or pallets, as you prefer, put the first with the legs up, put the second on top so that the legs converge. They can be additionally connected with self-tapping screws, and put a sheet of glass on top of them. The option is very beautiful and easy to implement.

As you already understood, I prefer the options when you do not need to deal with the work of furniture companies, and cut out all the details, and then customize them. I'm more interested in creative and fresh solutions.

For the second option, you will need only four old boxes, which, when placed on their side, must be connected to each other in a clockwise direction. We cover them with varnish beforehand, connect them and that's it - the table is ready. The empty space inside can be closed with a tree and a flower placed on top. Good luck with your choice.

DIY coffee table photo

Do you love designer clothes, but sigh in frustration when you look at the price tags that adorn them in stores? Try to become a designer yourself. Think it's difficult? Nothing like this! By following the instructions, you can easily create do it yourself original a piece of interior from improvised materials. And we propose to start with coffee table- such a simple, but very important subject furniture. Believe me, at such a table you will be happy to give tea to your guests, who will admire your skills. In addition, by creating a coffee table with your own hands, you will literally fill your house warmth and put a piece of your soul into it. So it's definitely worth a try.

DIY coffee table in a marine style

Romantic idea. All year round while drinking your favorite drink at this table, you will remember the warm sea, the gentle surf and the moonlit path. " Nautical» a table is tenderness, sophistication and originality in the heart of your home.

How to do?

1. Take an old window frame and clean it of dust and dirt. If the former glass cracked, insert a new one, then get rid of the old layer paints and sand the surface. Next, you should remove the metal corners, which additionally fix the details. frames.

Ready! Enjoy your creation and give joy to your guests!

Table-suitcase for travel lovers

Very original solution for an old favorite suitcase that has seen other lands with you and that you don’t want to throw away because of the memories.

How to do?

To get started, go to the store where you will need to purchase furniture legs ( wooden or metal). If you want to make a mobile table - then you need to take the wheels. You will also need plywood, screws and a screwdriver.

Now we make markings on the bottom of the suitcase for future legs and drill holes. Since it will not work to attach the legs to the fabric, we put plywood inside the suitcase, make markings on it through the holes and also drill it. Now we attach the mount to the bottom of the suitcase and fasten the legs. Using hot glue, glue the felt inside the suitcase.

To give the table an original look, reminiscent of distant travels, you can decorate it with stickers made in the form of stamps, or decorate it at your discretion.

That's all - an unusual coffee table is ready! By the way, there are a lot of options for turning suitcases into tables: by choosing the legs to your liking, you can make a table in style retro or classical. You can not attach the legs at all if you have a massive suitcase - it will look truly incredible: such a table will bring a sense of adventure and adventure into the interior, the spirit of travel and unexplored distant countries.

Log table for nature lovers

We take wooden bars(in this case, birch) of the same height and width, only 32 pieces. You also need to take the base for the table, legs (4 pieces), putty to match the wood, a screwdriver and glue designed for wooden surfaces.

First you need to assemble the base for the table, then glue wooden bars around the perimeter, and sew up the middle with cardboard. Then we fasten the legs to the bottom. Next, glue to inner surface thin wooden dies - thanks to this it will seem that the table is completely wooden. Now we take the putty and carefully close up all the voids, after which we overwrite until an absolutely flat surface is created. Voila! Now you are the owner of an extraordinary table that will become the highlight of your interior.

If you like the idea, you can create other tables according to this scheme, using, for example, branches instead of bars. To create such a table, you need to take a plywood box, painted black paint, the size of which is 40x40x60 cm (or any other size at your discretion).

To glue the frame, we take branches, from which we first remove the loosely holding bark (we do this with sandpaper). What is the procedure for gluing: first we glue the branches on the long side of the table, and then we select wooden dies and, as mosaic, lay them out on the ends. The thickness of the dice should be approximately 1 cm, they can be cut with parquet or circular saw. And finally - install the glass, which will be the countertop. If desired, by screwing wheel supports to the table, it can be made mobile.

Using the same technology, you can create many more unusual pieces of furniture. You can lay out the branches horizontally and then you get such a wonderful table. Such furniture looks not only very original, but also incredibly stylish.

original pallet table

An idea that came to the mind of someone truly brilliant. It would seem that you can come up with pallets, which are probably lying around in every dacha? And you can make them a very convenient and functional element of the interior.

How to do?

To get started, collect all the tools you need for your idea: the pallet itself, a drill, clamps, a hammer, screws, a nail puller, glue designed for wood, wheels, soap, a primer, a screwdriver. In addition, take paint brushes, a petal brush head with abrasive bristles for a drill, varnish and a colorless primer.

First of all, you should take a drill with a nozzle designed for wood processing, and clean the surface of the boards from contamination with it. Now carefully disassemble the sanded pallet into parts. Lightly tap the rusty nails with a large hammer and carefully pull them out with a nail puller. Glue the broken pieces of boards with wood glue. At this stage you will need clamps. They need to carefully clamp the boards and wait until they dry out.

Now the parts prepared for the countertop need to be nailed and glued on the reverse side, then clamped with clamps and wait until they dry.

Then cover the table with a colorless primer, and then varnish. Next, on the back of the table, mark the places for the screws to attach the wheels. Drill holes for the fasteners. In order for the screws to easily enter the wood, grease them with soap. Using a ratchet, you can quickly and conveniently tighten hex screws.

Stylish, compact and quite functional table is ready!

Table from boxes

Another one original idea captivates with its simplicity and surprise - well, who would have thought to build a table from boxes? But it has come, and now you yourself can create such an unusual piece of furniture at home. Surely you yourself will be delighted, and your guests will appreciate the originality of this idea.

How to do?

Take 4 wooden boxes, sandpaper, water-based varnish, roller and brush, dowels, 10 mm plywood sheet, PVA glue, 4 wheels and self-tapping screws.

First you need to sand the boxes and varnish them. Then, using a drill with an emphasis, make holes at the ends of the boxes. Using wood glue, you need to fix the dowels in the attachment points and connect the ends of the boxes to each other. Attach the wheels to the plywood sheet, and then attach the sheet to the boxes with self-tapping screws. The table is ready!

These extraordinary things can be created from quite ordinary materials. Having imagination and a desire for originality and comfort in your home, you can easily work wonders. Look around: maybe the old window frame has every chance to turn into an interesting element of the interior?

Or maybe a huge wooden reel from an industrial cable that can become an elegant piece of furniture?

How and from what to make a cool table with your own hands

Many people dream of decorating the interior of their apartment with exclusive interesting designer pieces of furniture. There are a huge number of such interior items in stores, but their prices are often simply fabulous. With a little effort, some things can be done on your own. For example, excellent coffee tables are obtained from various materials at hand, which will become a real decoration of any interior and a source of pride for homeowners.

Table in a marine style

To make your own coffee table nautical style you will need an old window frame, which must first be cleaned of dust and dirt. Then, if necessary, insert new glass into the frame, clean the surface of the structure from paint and sand it. The surface of the frame should be covered with acrylic paint or white enamel.

To make the legs, you will need a cutting, which must be cut into 4 equal parts. To remove all roughness and irregularities, the surfaces of the legs should be treated with sandpaper. As a basis, you can use furniture board or board, the width of which does not exceed the width window frame. The legs are attached to the base with long self-tapping screws. Also, the base with legs is attached to the frame with self-tapping screws.

Since the frame is an empty transparent box that can be filled with attributes maritime theme: pebbles, shells and souvenirs brought from vacation. In order for the table to have a complete look, its legs can be braided with a thin rope.

A table from a suitcase

The original table will turn out from an old suitcase. For such a piece of furniture, you will need to purchase furniture legs. They can be either metal or wood. If you use special wheels, you can get the original model of a mobile coffee table. You will also need a screwdriver, screws and a piece of plywood for work.

First of all, it is necessary to cut a rectangle out of plywood, the dimensions of which must correspond to the width and length of the bottom of the suitcase. Plywood is laid on the bottom of the suitcase and markings are made for the legs. Using a screwdriver and screws, the legs are attached to the base of the suitcase. Then, felt is glued to the base, inside the suitcase. The table is ready.
There are many various options turning an old suitcase into a coffee table. By choosing the right legs, the table can be made in a classic or retro style.

Log table

Making a table out of logs is also quite easy. To do this, you need small logs of approximately the same thickness and height (32 pieces). You should also prepare the base for the table, 4 wheels for furniture or legs, putty, glue suitable for wood, and a screwdriver.

First you need to make a base for the table, along the perimeter of which there will be logs. The middle of the warping is sewn up with cardboard. Legs or wheels are attached to the underside of the base. In order for the table to appear completely made of logs, small round dies must be glued to the surface of the cardboard. All voids formed between the dies are smeared and carefully rubbed to create a smooth surface of the table. You can decorate a similar table with branches.

Instead of a large number of small logs, you can use one thick log cut to make a coffee table in this way.

Pallet table

Even from the most ordinary pallets that can be found on each, you will get an excellent coffee table. For work it is necessary to prepare:

Wooden pallets;
Hammer;
Drill;
Nail puller;
clamps;
Glue;
screws;
Screwdriver;
Legs or wheels;
Primer;
Soap.

First of all, the surface of the pallets must be cleaned of contaminants. To do this, you can use a drill with a nozzle for working with wood. Also, with the help of a nail puller, you should get rid of old nails and disassemble the pallets into parts. All damaged and broken pieces of boards must be glued together. Clamp the boards gently with clamps and let them dry well. Then glue the prepared parts of the countertop on the reverse side and again with clamps. After complete drying, the surface of the table must be coated with a layer of primer, and then with varnish. It is necessary to attach wheels or legs to the back of the resulting table. In order to make it easier to attach the screws to the table, their surfaces can be rubbed with ordinary soap.

After all the work done, you get a functional, stylish and compact table.

DIY cool table ideas photo

The choice of ready-made tables in the furniture store is huge, and it will not be difficult to choose the model that fits perfectly into the interior. But it is even easier and cheaper to make a coffee table with your own hands. This does not require any expensive materials or special tools. And all the work even for a beginner in carpentry It will take a maximum of two to three hours.

DIY coffee table

Since there is a wide variety of wood coffee tables, drawings of several models will be given below. They differ not only in appearance, but also in the complexity of implementation.

Rustic style

For the manufacture of such a piece of furniture, it is undesirable to take glued wood. A truly chic table will look if you make it from solid oak, hornbeam, boxwood. But since these types of wood are very expensive, they can be replaced with birch, spruce or ash. A big plus will be the use of old boards that bear the imprint of time, or artificially aged. Such material should not be painted or varnished, it looks harmonious in itself.

Blueprints

This model does not require strict adherence to schemes and instructions. It is easy to make, changing all sizes at will. The initial settings are listed below.

All values ​​are in inches. If it is not possible to get a ruler or square, with markings in this metric system, you need to convert them to centimeters. To do this, just multiply the amount by 2.54.

materials

For manufacturing you will need:

• Boards at least 3 cm thick.
• Self-tapping screws.
• Wood for carving thorns.
• Joiner's glue.
• Paint, stain and varnish (optional).

Tools

In the process of work, you can not do without:

• Fraser.
• Knife saw.
• Screwdriver.
• Electric drills.
• Chisels.
• Sander or sandpaper.

Step-by-step instruction

In the process of work, you will have to sequentially perform the following operations:

1. Preparation. It consists of three stages:
   1. Draw the boards, outlining the location of all the details.
   2. Cut out the details along the drawn outline.
   3. Sand each saw with sandpaper or grind with a grinder. If the surface of the wood is rough, it should also be brought to full smoothness.
2. Creation of technological openings. The task is to drill them in places where the parts will be fastened with wooden spikes. These are the connection points of the legs with horizontally laid transverse side planks in the lower and upper parts, as well as the connection of the boards that make up the table top. To facilitate the work, the tabletop can be assembled not on spikes, but with the help of several rails attached from the inside with self-tapping screws and glue.
3. Spike cutting. Focusing on the diameter and length of the resulting holes, wooden spikes are prepared.
4. Product assembly. It is carried out in several stages:
   1. First, the boards of the countertop are mounted to each other. Regardless of which connection is used, on wooden spikes or on battens nailed across, it does not hurt to use glue at the joints. The main thing is to make sure that drops of glue do not leak onto the front side.
   2. After that, the legs and side strips are assembled, the lower shelf and decorative crossbars are mounted on the sides.
   3. The tabletop is screwed to the upper side strips with self-tapping screws.

Unusual

This table will really appeal to those who have purchased a sofa without armrests. You can put a laptop or a cup of coffee on it, and put things that you want to keep at hand. Since the lower part goes under the sofa, it does not take up extra space, and if necessary, you can turn it upside down, and it will turn into a regular coffee or children's table.

Blueprints

Dimensions are in inches. To convert them to centimeters, you need to multiply by 2.54. You can change the width and length of the elements according to individual needs.

Parameters of the main parts:

Internal vertical bar that serves as additional support:

materials

To create such a convenient and useful piece of furniture, you only need:

• Boards.
• Self-tapping screws.
• Joiner's glue.
• Paint, varnish, stain are used as desired. If the interior is made in boring colors (gray or beige), it is recommended to make the table bright and add a few more accent things of the same color to the room. It can be curtains, pillows, a flower pot.

Tools

There are tools at home for any person who likes to make something out of wood with their own hands:

• Saw-hacksaw.
• A grinder, which will successfully replace sandpaper.
• Screwdriver.
• Glue brush.

Description of work

There is nothing difficult in making such an unusual coffee table. The work will take little time and require almost no special skills:

1. Cut out the material. Details are drawn on the boards, guided by the drawings. You need two identical elements for the top and bottom, a longer vertical element, a vertical inner bar and four small planks to create a "leg".
2. Sawing. Cut out all the details with a hacksaw.
3. Grinding. Remove all splinters and roughness on cuts and other parts of the parts with a grinder.
4. Decorative processing. Details are covered with stain, paint and / or varnish.
5. Assembly. All elements are interconnected according to the scheme. Since large loads on this table are not provided for by its design, you can only use wood glue. For reliability, it is worth screwing screws in several places.

If you need a colored table, but there is no way to use varnish and paint, and then wait for them to dry, it is better to use a self-adhesive film.

Making a transforming table

Coffee table-transformer easily turns into a dining table or work surface. Making one with your own hands is no more difficult than a regular one, but using it is much more convenient.

When folded, the table looks like a rectangular cabinet, and when unfolded, its tabletop becomes higher and doubles in size.

Blueprints

The drawings are given only for the wooden elements of the table. It makes no sense to make a transformation mechanism with your own hands, since buying a ready-made one will cost less and significantly reduce time costs.

Tools and materials

To make a transforming coffee table, you will need the following tools:

• Screwdriver.
• Knife saw.
• Electric drill.
• Sander.
• Electric jigsaw.
• Square or ruler.
• Simple pencil.

From Supplies should be prepared:

• Boards from natural wood or MDF, chipboard, OSB panels.
• Self-tapping screws.
• Metal furniture corners.
• Loops.
• Optional - varnish, paint and stain.
• Tassels.
• Joiner's glue.
• Sandpaper (in the absence of a grinder).
• If glued wood panels are used, a special thermal tape is also needed to decorate the edges.

Completing of the work

Before you get to work, you should find a transformation mechanism that is suitable in size for sale. To make the finished table convenient to use, even in the store you need to check the smoothness of the move, make sure that there are no squeaks and jams.

When all the materials and tools are prepared, you can start making the table. This process consists of several stages:

1. Wood marking. Using a pencil and a square, lines are drawn on the boards indicating the edges of the parts. You can immediately number each element, so that later you do not get confused during assembly.
2. Cutting details. Using a hacksaw and a jigsaw, cut out the parts along the marked lines. This work should be done carefully, as one awkward movement can ruin the material.
3. Grinding. Each detail is processed with a grinder until it acquires absolute smoothness. Not a single splinter should remain on the boards, for which it will then be possible to catch on clothes or injure yourself.
4. Impregnation with stain. This is done in one or several layers, depending on the desired color of the wood. Before applying each subsequent layer, you need to wait for the previous one to dry.
5. Painting or varnishing. After staining, the parts are varnished. If it was not used, you can paint them in any desired color.
6. Product assembly. Guided by the above scheme, the table is assembled using self-tapping screws, for reliability, gluing all wood joints with carpentry glue. The load-bearing sidewalls are also reinforced from the inside with furniture corners. The two parts of the tabletop are hinged together so that the protruding part of the hinges is on the wrong side and does not spoil the appearance of the unfolded table.

Table top decoration

To give the table more personality and make it unique, you can decorate the tabletop. The most popular options are aquarium, decoupage, mosaic and craquelure.

Aquarium

The backing tabletop is made with small sides on the sides, various shells, sea stones and other decor are laid on it, and then filled with epoxy. By the way, it is not necessary to decorate the countertop in a marine style, you can create any composition that fits the interior.

Decoupage

Decoupage allows you to decorate the countertop with any pattern you like. Ready-made pictures can be bought at the store, they will only have to be glued to the surface and varnished. They also use paper napkins with images and even print pictures on a printer.

The decoupage technique is performed as follows:

1. The napkin is exfoliated and manicure scissors cut out the part that will be used for decoration.
2. The cut piece is placed face down on a plastic bag or on cling film.
3. Swipe over the napkin with a damp brush (not dry and not so wet that water drips from it).
4. The part of the countertop where the drawing will be located is smeared with glue, then a napkin is placed over the adhesive layer with the wet part down and the paper is slowly peeled off from the polyethylene using a brush with glue.
5. When the drawing is completely transferred to the table, it is covered with another layer of glue.
6. If wrinkles appear, they are eliminated by ironing them through tracing paper.
7. Paints can draw contours, add shadows.
8. After finishing work, the countertop is varnished.

Mosaic

Decoration looks very original and expensive mosaic tiles. You can buy everything you need to work with a mosaic in a needlework store, but you should come up with a pattern yourself.

Craquelure

A beautiful cobweb of randomly located cracks is formed on the surface of the countertop if it is covered with a special craquelure varnish, which is sold in construction hypermarkets and large stores with needlework goods. This method can be used on its own or in combination with mosaic or decoupage.

A coffee table made by hand will not only be a wonderful addition to the interior, but also a reason for pride. After all, not every home has such unique and inimitable furniture.