How to make a pond from a tire with your own hands? How to make a pond from tires in the country Artificial reservoir from a wheel

Often the owners of summer cottages or plots want to decorate their possessions by making ponds with their own hands from a tire. Such a reservoir, made of tires, undoubtedly becomes a good source of coolness and pleases the owner himself, as well as his guests, and is a decoration of the entire summer cottage. A person will need only one view of a pond and its water surface to relax and feel truly on vacation. However, some, evaluating that their own plot is not so big, do not go beyond their dreams. And in vain! This article will show you step by step how to make a pond in the country with your own hands from tires or tires.

A place for your mini-pond: how to find it

It should be located where it will attract our attention, so you need to choose it very carefully. It is important to follow a few rules that will help make your choice successful:

1. Your pond should not be exposed to the sun all the time. The best place for the location of the reservoir - partial shade. If this factor is neglected, then the plants will wilt, and the water will bloom.
2. A space open to the wind will also not work.
3. The pond surrounded by trees will quickly fill with fallen leaves and wood dust. Such a pond will need to be cleaned frequently, which will take a lot of time and effort.

It would be great if the reservoir was located in a place that can be viewed from everywhere. Then the whole surrounding landscape will be well reflected in it. When such small bodies of water are in the lowlands, they look much more attractive. Therefore, when looking for a place for a pond, then try to find such a natural depression in the area. there is good way find such a site without spending much effort.

The picture shows a place where your body of water will not be under the constant rays of the sun, and also which is clearly visible from different sides

Previously, you can simulate the location of the future pond by putting a piece of plastic wrap in your chosen place. Now go around it to see how the future mini-pond is supposed to look from different sides. If you liked it, then this is the most suitable place.

Where to find the right tire

Before looking for the right tire, you need to think about what size you need a reservoir and how deep. If on summer cottage there is not enough space for a large structure, then only one slope from the car will be enough for this. And if the plot of land is large, then for the implementation of this project you need larger tires, with a diameter even higher than the height of a person. For instance:

1. Slopes from the KamAZ car;
2. Tractor wheel "Belarus";
3. Rubber from BelAZ.

What to do when there is no suitable tire? The one you need can be found at a service station, where there is a lot of rubber, which you still have to dispose of. You can search for used rubber at any car depot or ask a neighbor who has a car. Sometimes used tires just lie on the side of the road.

Large stingrays like from Gulliver, Kamaz, BelAZ are not easy to find. They are often not suitable for our relatively small areas.

What your body of water will look like

Would you like to have fish in your lake? In a small lake, this is hardly possible. But if you have a pond made of a large tire, then you can get, for example, goldfish. But in another case, if the structure is not made for fish, then it can be decorated with various plants, pebbles, animal imitations and other artificial decorations. In general, it all depends on your taste and imagination.

So that no one guesses how your mini-pond appeared, it is necessary to close the rubber base well with a stone. You can also add lighting from lamps to the decoration. During the day they collect the energy of the sun, and at night they shine beautifully from the pond.

Mini pool for children (video)

However, one should not forget that any mini - pond may turn out to be unsafe for small children who were left by themselves near the reservoir without adults.

Pond decoration has two sides. When decorating a pond, we think about the aesthetic appearance. But it must be remembered that babies can also become connoisseurs of beauty, who are also attracted by the decor and various figures. Children should not stay near a body of water without adult supervision

And now step by step instructions

The success of any undertaking depends on good preparation. You need to collect in advance required materials and tools - this will help you not to get distracted during your main work.

Step one - collect inventory, procure materials

Inventory: shovel and large sapper shovels, building level, electric jigsaw or hacksaw for metal.

Materials: car tires, polyethylene or special waterproofing material for pools, sand, crushed stone, large stones for decorating pool edges, plants for landscape design.

When everything you need is collected, go to the second step.

Step two - preparing the tire

We first remove the dirt from the tire. After that, you need to cut off the upper part of the ramp.

On the tire, you need to cut off the top

Step three - dig a pond hole

To start digging a hole, you need to level the surface that we have outlined for the reservoir. Also, before starting work, you need to set the depth of the future lake according to the rubber base, as well as the desired type.

Dig a hole

The rubber base of the reservoir can be:

1. Lower the entire tread to the depth.
2. Dig in half
3. Leave most of it on the surface of your site.

Digging a hole. We make a shape that corresponds to the outer diameter of the tire, with small indents around the entire circumference for free lowering it to the required depth.

If you do not bury the tire completely in the ground, then the remaining side will protect your pond from wastewater.

The hole needs to be dug taking into account the necessary "cushion" of sand (about 15 cm). We pre-align the bottom so that the waterproofing gasket is not damaged. If necessary, the sand must be sieved to remove hard lumps and small stones in advance. It is important to carefully tamp the bottom and level it horizontally.

Construction stages

Step four - waterproofing device

You can use ordinary polyethylene, but keep in mind that it is short-lived. After a short use, it deteriorates from exposure to the sun, water and temperature extremes. It is better to take waterproofing for the construction of stationary pools, which is much more practical. It is sold in specialized stores or in hardware stores. Of course, when using special waterproofing the cost of your pond will be higher, but water from it will not flow into the soil. I don’t want it to be like the saying: "a miser pays twice."

Instead of a film, it is better to take a waterproofing material.

How much material is needed? As much as is needed so that the canvas covers the bottom of the tire, fits against the walls, and so that there is another half meter of film beyond the edges of the pool. In order for the waterproofing material to fit snugly to the bottom and walls, it is best to fill the entire container with water when laying. She will put pressure on everything inner surfaces reservoir and give them the correct shape. Try to spread the waterproofing material well. To keep it in position, press down on the edges with large, rolled stones.

Decorating the pond with stones

Step five - install the walls and bring beauty to the reservoir

The edges waterproofing material level and sprinkle with sand and screenings. The membrane is now fully secured and will not slide out. Sand will be the main material for the design of the future reservoir.

Designer tips for installing a tire pond (video)

How you want to use your reservoir will depend on the version of the distribution of stones.

For swimming and bathing

To build your project for swimming, the tire must be quite large. Do not overload the shores of this structure with large stones, otherwise bathers may be injured. An excellent option would be to simply form a pad along the walls.

For decorative purposes

In another case, if the pond is only for design purposes, then you will have to dream up the distribution of stones and plants and decor, thereby emphasizing the look of your yard and will delight those around you. Now don't worry about the jagged stones, it will look very impressive.

Decorative pond with fountain

It is advisable to lay the stones in rows: large and rounded stones at the bottom, and small stones at the top. Miniature pebbles smoothed by sea water will help to beautifully enclose the bottom of the mini-pond. Sand with gravel is not recommended to be used as a bottom decoration due to the fact that the water becomes cloudy and unpleasant in appearance.

Small to medium sized animals live in every yard. For example: hedgehogs, moles or mice. If you do not want to see them dead in your reservoir, then take your time and effort to find a snag that will give originality to your reservoir, well, and if you are lucky, it will save the life of some small animal.

Conclusion

Decorating your yard or garden with such an original structure is very simple and does not require a lot of money. All you need is a little time of energy and imagination. The work itself will bring you satisfaction, and the result will bring joy to you and your loved ones.

Tire jacuzzi (video)

The desire to ennoble suburban area is quite understandable and natural. A pond made of a tire, made with your own hands, is one of the options to make the courtyard of a summer cottage or house cozy and attractive. Making a miniature pond is simple and fun. This structure does not need a lot of space. Everyone can make a pond in the country. For this, there is no need to involve heavy equipment and hired workers. An artificial pond will be a great addition to such landscape elements as garden arches, paths, flower beds and gazebos. There are many materials for the manufacture of a reservoir, but the most affordable and easiest to manufacture is a small lake built from car tires.

Take your time to throw out old tires, you can make original jewelry for a summer cottage: animal figures, chairs, swings and even a small pond!

Choosing old tires

The idea of \u200b\u200bequipping an artificial reservoir on the territory of their possessions is visited by almost every property owner. It is a swimming pool for hot weather and a place of relaxation for adults. Many are deterred by the significant cost of finished products. Not everyone is ready to take on self-construction concrete containers.

Using old tires, you can quickly and easily make a beautiful pond.

First of all, it is necessary to assess the condition of the site. The dimensions of the products that will be used in work will depend on its size. If the territory is large, then it is quite possible to plan the construction of several ponds from old wheel tire... To arrange a reservoir, it is necessary to choose a flat place where there are no large boulders, tree roots and communications. This will allow the construction to be carried out without complications and undesirable consequences in the future.

When planning the arrangement of an artificial reservoir, it is necessary to provide for such nuances as:

1. Pond type. It can rise above the ground or be buried.
2. External design. As a rule, natural stone and granite chips are used to imitate the natural setting. You should take care of finding these materials in advance.
3. Water supply. The finished container will have an impressive volume. Consideration should be given to a permanent water supply or a long hose to replenish the fluid.
4. Drainage. Whether the pond is used for swimming or purely decorative purposes, water will splash or overflow from it. It is necessary to provide for the drainage of this water to prevent the formation of dirt at the object.
5. Flora and fauna. It's a good idea to populate the reservoir with fish and aquatic insects. Plants look good both on land and in water.
6. Lighting. It is necessary to illuminate the reservoir not only for decoration purposes, but also for safety. In complete darkness, there is a high probability that an adult or a child can fall into it.

In addition, it is worth thinking about equipping the pond with a light canopy, bench or armchairs. Thus, a water body made from a conventional tire can become a semantic center for the entire adjoining territorywhere residents can enjoy their time.

Back to the table of contents

Tools and materials required for work

The main subject around which all construction will revolve is the tire. It is advisable for the yard to pick up this large diameter product. For the finished pond to be functional in every sense, a cover with a diameter of 120 cm or more is required. You can use wheels from KamAZ, BelAZ or large wheeled excavators. You can find them in landfills, stations maintenance or in quarries. As a rule, you do not need to pay for rubber. Its owners will gladly give away a thing that needs to be disposed of for a lot of money. The tire can be delivered to the site by a dump truck or a tow truck with a manipulator.

For work, you will need tools and materials such as:

• shovel;
• hacksaw for metal or jigsaw;
• building level;
• roulette;
• cord;
• wooden stakes;
• one or more tires;
• sand;
• gravel;
• waterproofing sheet;
• large stones for decoration.

Tires must be carefully prepared for use. All mechanical objects that could get stuck in durable rubber must be removed from their surface. The product must be cleaned of dirt and washed with warm soapy water.

To create a waterproofing layer, you need to purchase a dense polyvinyl chloride fabric. It is durable, resistant to high and low temperatures. The service life of PVC film is 10-15 years. Plain polyethylene can tear or fray over several months.

Back to the table of contents

Laying tires in the ground

Before digging a pit, it is necessary to take measurements from the wheel. The hole should be 20 cm larger than it in diameter. This is necessary to secure the waterproofing material. To prevent debris from getting into the reservoir, its edges should rise above the ground. Based on these indicators, the diameter and depth of the pit are outlined.

After applying the markings to the ground, work is carried out in the following order:

1. Cut off from the tire side part... This can be done with a saw or jigsaw. The edges need to be aligned. If necessary, they can be pasted over with rubber or flexible plastic. This will keep the waterproofing from getting cut.
2. A hole is being dug. Its bottom must be carefully leveled. If this is not done, then the finished design will look unaesthetic. Water will constantly pour out from one end.
3. The bottom of the pit is laid out with small pebbles and rammed. A layer of sand is poured on top. It is leveled and moistened with water. So, it turns out a reliable base for a mini-pond.
4. The tire fits into the pit. It is aligned horizontally. Small pebbles or sand are poured into the bottom of the pit. The height of the layer should be such that it covers the inner projections of the tire by 5-10 cm.
5. A waterproofing fabric is placed in the container. It is evenly distributed over the inner volume of the rubber container. The edges are brought out.
6. The pond is filled with water. It creates a certain pressure on the bottom and walls of the container. Under pressure, the walls expand and the laid film is pressed against them. The body of water takes on its true form.
7. The edges of the waterproof fabric are inserted into the gap between the wheel and the ground. Sand is placed in this opening. It is wetted with water. After shrinkage, new sand is added and the process is repeated. This creates a reinforcement for the film. Instead of sand, you can use earth or clay.

The finished structure stands firmly on its foundation. The sturdy mount protects the pond from shifting when swimming. It's time to decorate it.

And cozy. Decorative trees, flowers, paths or other decorations allow you to arrange landscape design in an original way, but an artificial pond made by yourself can become its real highlight.

Pond in the yard

When arranging the yard of their house or summer cottage, owners often think about the idea of \u200b\u200bmaking a pond out of a tire with their own hands. This element can bring freshness and originality to any design. Each family member will be happy with this addition: children are very fond of splashing in the water, and adults can relax in the evening after working days near a small reservoir.

Since building materials are quite expensive at the present time and an impressive amount of money will be needed to build even a small reservoir, the most affordable option is a pond from old tire... With his own hands, every owner of a summer house or house can effortlessly create an excellent piece of paradise in his yard. This version of the reservoir can be done even on a balcony or in an apartment using a small car tire.

How to make a pond from a tire with your own hands

In order to make a pond out of a tire, you first need to decide on the place where it will be located. It is best to set up a pond on level ground, free of stones or other solid materials. This will speed things up a lot. You also need to decide on the size of the pond in order to look for the right tire. If the territory allows, you can make several reservoirs.

When making a pond in the country from tires with your own hands, you need to decide whether this pond will be deepened into the soil or rise above the ground. It's also better to think over the design in advance. Stones look very beautiful when decorating, so you can start preparing them in advance. To find beautiful stone not so easy, but buying this material will have to shell out a lot of money.

What kind of pond cover do you need?

For the right choice tires need to know the size of the territory on which the reservoir will be located. If there is little space, then you can use a bus from passenger car... For a large yard, it is better to take a tire from a KAMAZ, tractor or other large equipment.

Tires can be found at tire shops. In such a place, the tire will be given away free of charge, because the used rubber must be recycled. If you do not have the option you need, you can contact car companies that can sell used tires for little money. You can also search suitable option in private ads. With a little effort, you can find the tire you need.

Pond Tools

In order to make a pond in the country with your own hands from tires, you need to prepare the following tools:

Roulette;

Level.

The purchased tire must be thoroughly cleaned and washed if necessary. Next, you need to cut the top of the tire with a jigsaw. If this tool is not available, you can use a metal saw or a sharp knife. Then you need to measure the diameter of the tire and its height and determine how deep it will be into the soil. The diameter of the pit must be slightly larger than the tire to be able to lay and secure the waterproofing.

You also need to make sure that the pit has an even base, which will help the level. If the bottom is uneven, the tire will be filled with water unevenly: there will be an overflow on one side, and a high side on the other. To avoid getting dirt and rainwater into your pond, place the tire slightly above ground level.

Tire waterproofing

When making a pond from a tire with your own hands, you need to take care of its waterproofing. The cheapest and affordable option - ordinary plastic wrap. The only drawback of such material is its unreliability. The film is easily damaged and therefore has to be changed. You can use several layers of polyethylene, which will slightly increase the reliability of the waterproofing. But if you don't intend to go back to redecorating your pond, it is best to purchase a waterproofing pool cover. This material can withstand heavy loads and will last much longer. You can buy it in specialized stores.

After the tire is laid on the prepared place, you need to distribute the film along the bottom and walls of the tire. The film should protrude about half a meter beyond the tire edges to secure it and prevent the edges from slipping.

After installing the waterproofing, the tire must be filled with water. Under pressure, the film will be evenly distributed over the bottom and walls of the reservoir, and the pond will acquire its future shape. After that, it is worth finally distributing and aligning the edges of the film that protrude beyond the tire.

Strengthening the pond

To avoid tire shifts and to strengthen the wrapped film, sand the edges of the groove. This material will also help prevent weeds from growing near the pond. Do not use crushed stone to strengthen the pond. Sharp stones can damage the waterproofing, and it will begin to slide inward.

If there is no sand at hand, you can fix the tire with the earth left after digging a hole.

Pond decoration

After final installation tires can be taken for decor. A flight of imagination will tell you how best to decorate a made pond from a tire with your own hands. A photo original decor pond will help determine the search for an idea.

Different materials can be used:

Plants;

Plaster figures.

The pond decorated with stones looks very nice. Having beaten them competently decorative features, you can make a pond that resembles a natural reservoir as much as possible. If it is also intended for swimming, then the stones should be placed at a minimum, securely fixing them.

Various plants will look very beautiful near the pond. They can be planted directly into the soil or placed in pots. Making a pond in the country with your own hands from tires, you can stock up on plants growing near rivers or lakes. For example, sedge bushes will look very natural near a pond, and from the branches of which they slide into the water, they will create the impression of a real oasis.

Small lanterns can be an original addition to the design of the pond during the day they are charged, and in the evening your pond will play with the reflections of flickering lights.

Fountain in a pond made of tires

Doing it yourself from tires, you can equip it with a small fountain. To do this, you need to purchase a special pump with different nozzles. By placing it in a pond, the base can be overlaid with stones. This will create additional filtration and prevent pump clogging.

The fountain installed in the pond from the tire allows the water to remain fresh for a long time. Pumped over by a pump, it passes through a special filter and is cleaned. If you want to drain the pond, then it will be enough to connect a special hose to the pump through which the water will flow out of the pond.

The nozzles in such a pump are easy to change, and you can get fountains of various shapes. You can also equip the pump with lighting, which will look very nice in the pond.

What fish can live in a tire pond

If you are very fond of fish, then you can launch them into the made pond. To do this, it is better to purchase special types of fish, which in winter period can be kept in an aquarium. By contacting a pet store, you can get detailed recommendations on suitable types fish and the peculiarities of water care.

To keep the fish comfortable, you can plant algae or other plants that grow in the water in the pond. It will be a great addition to your pond design. Algae can grow in pots, which will need to be positioned along the bottom of the pond.

Swimming Tire Pond

Some owners of summer cottages or houses make a pond from a tire with their own hands for swimming. Used tires of heavy trucks are used for such a pond. The bottom of these ponds can be covered with beach sand to avoid slipping. The descent into the reservoir can be equipped with steps, and the exit - small wooden deck... It is also important to monitor the quality of the water and change it often or use special reagents.

If you want to make the courtyard or garden beautiful and original, then the best solution is to make a pond out of a tire in the country house with your own hands (the photo below contains one example of such a pond).

Such a reservoir will become a favorite vacation spot for your loved ones. Since water has a calming effect, the pond can become not only beautiful, but also a very useful addition to your yard landscape design.

The dacha has great creative potential, since there is a lot of space for implementation on it design solutions... The atmosphere in the country house should be comfortable and conducive to quality rest. Water has an exceptional influence on the atmosphere in the garden, as it creates a sense of tranquility and unity with nature. It is thanks to its properties that the presence of a reservoir in the country attracts many owners. Today we will consider a method with minimal physical and financial costs to build a pond from an improvised material - tires. Also, do not forget to tell us about your experience of building a pond from tires with your own hands.

The pond wears special meaning c, as it gives a special emotional appeal for giving. Many do not even imagine a vacation away from water.

The advantages of ponds are obvious:

• Construction flexibility. You can equip a pond with different decor;
• You can settle fish or unusual plants in the pond;
• The presence of water on the site allows you to ozonize the air and create the impression of freshness;
• There are a lot of options for arranging a pond, given the variety of natural materials and an abundance of design solutions, you can create truly unique decors;
• The reservoir provides moisture to adjacent plants, giving them a green and healthy look;
• An additional recreation area is being created. You can just sit and watch the flow of water and the movement of fish;
• Perfectly complements any.

Ponds in summer cottages (we talk about how to make a summer cottage pond from a wheel below) perfectly fill the lack of unity with nature and create an ideal microclimate on a site with a beautiful landscape on the water. One of the directions in the creation of ponds is the option made from car tires, which will perfectly help to replace artificial reservoirs.

What's so special about a tire pond?

The key undeniable advantages of this type of tanks are:

• Durability of materials. Rubber and insulation can last for decades when the right device;
• High indicators of tank strength;
• Can make ponds different sizes;
• Rubber perfectly tolerates low temperatures and does not deteriorate under the influence of ultraviolet radiation;
• Despite the fact that rubber is not an environmentally friendly material, it does not transmit harmful substances, especially the top is covered with a layer of waterproofing. Therefore, such a pond can be used as an aquarium;
• It has a solid frame, which allows you not to create walls, but only the bottom;
• There is a possibility of painting in any color you like;
• The tire lends itself well to decoration;
• The tire itself is usually obtained free of charge or for a small fee (if relatives or friends have old tires that they do not need, which they want to throw away or from employees in the tire service);
• You can install tires yourself without hiring specialists;
• During transportation or installation, the form is not damaged, it only bends;
• Due to the elasticity of the material, the tire can take the shape of an oval.

Photos of different design options

There are not so many types of ponds made from tires, in most cases they differ in decor. By functional types only a few varieties can be distinguished:

• A regular pond with a round shape;

• Cascade type, where a waterfall system is used, when water fills one reservoir, then falls into another;

• A group of ponds, thus, equips 2-3 or more tires at once. Looks good when they have different sizes;

• With a fountain. Even in a relatively small pond, you can make a fountain that will decorate the site.

With regard to decor, the choice is quite large, but mainly the emphasis is on natural materials, therefore, the arrangement of a pond often requires:

• Stones are predominantly natural species, perhaps they will be turned, decorative or sharp-angled stones;
• Greens. You can create a real oasis with green spaces growing both in the pond itself and beyond;
• Lighting. You can do the lighting by the pool from the inside or outside;
• Decorative figurines. They can be prepared from leftovers or other tires, also sold different options in shops for giving.

In general, you can use everything that you have enough imagination for making your own pond.

How to choose a seat?

Mostly a reservoir is created for some reason. In pursuit of her, it becomes more obvious where it is better to equip our structure. Mostly the pond has some kind of decorative value (we described how to make a pond decorative below), which can complement the overall appearance of the site or create a secluded corner in it.

It is advisable to place our small lake in the center of the site so that it is noticeable from any angle and immediately gets the attention of guests.

For correct location pond, it is necessary to take into account several main factors that will affect the decision:

• Plot size. If it is large enough, then visibility will not work, it is better to equip it in some open and noticeable place. Another topical advice is to make a pond near a gazebo or a place where you spend most of your time;
• The form of the land plot. Mostly select a rectangular plot, if it is strongly elongated, then it is worth considering the location in the center free spacewhere there are no buildings;
• The size and decor of the reservoir itself. If you take a large tire or prepare a cascade, you will need a large piece of land that is as clean as possible from construction debris and trees. Weeds are not a problem, they are easy to remove. The decor is affected by the size, if there is a desire to equip a fountain, lighting or similar elements, you will have to make a reservoir bigger size;
• Soil type. If the surface is loose, dirty or has unpleasant odor, it is better to move the structure to another place;
• Is groundwater present under the top of the earth? If there is groundwater nearby, it will be easy to provide a constant flow of water, but the bottom should not reach directly to the stream.

What tires do you need?

To correctly determine a suitable tire, you must first find out the planned dimensions of the structure. If you are planning a very small body of water, which will be a replacement for an outdoor aquarium, you can choose a tire from a regular car. To build a larger structure, you will have to choose a larger caliber - from a truck, for example, a KamAZ, tractor or bus.

The easiest way to get the necessary tire is to ask at a car repair shop or tire shop, where it will be sold for a small price. For specific tires, for example, from KamAZ, you can ask the required frame in the workshop from the service center of the car company. Sometimes they can be found in ads ( on Avito or Yulia) or independently post an application for the purchase of a tire.

What is needed in the work?

To carry out a high-quality arrangement of a pond using tires, you must first prepare a tool, mainly a garden one, which is in every farm:

• Roulette ( meter);
• Level;
• Shovel;
• Electric jigsaw for cutting tires. If it is not available, you can take a hand hacksaw for metal.

In addition to the tool, you still need to prepare the material:

• Tire. In addition to the fact that you need to get it, it also needs to be cleaned of dirt, fuel oil and other unwanted precipitation. In general, the cover is unsuitable for tank preparation, since the top edge hides most of the entire tank. To do this, cut off the top of the tire using an electric jigsaw or a hacksaw;

• Stones for arrangement. The most affordable and beautiful way to create an attractive and natural look is natural stoneswith which the rubber is hidden;
• Waterproofing film that will prevent water leakage;
• Adhesive for equipping the tank from the inside and outside;
• The rest of the decor and greenery is determined according to your wishes, also applies to lighting and a fountain.

Beginning of work

A pit is pre-dug into which the tire will fit. It is possible that it will lie on top of the ground, this option is simpler, but it does not look a bit aesthetically pleasing, although it all depends on the quality of the design and the idea.

To determine the dimensions of the pit, it is necessary to replace the thickness of the tire and its width. It is worth considering that the dug hole should be slightly wider in order to lay it neatly and without deformation and ensure a strong bond. It is also worth using a level so that the surface is perfectly flat, as otherwise the water will be at an angle.

Important! So that the impromptu reservoir does not become much clogged, it is worth raising it slightly above the surface level.

Wheel waterproofing

To prevent high water consumption, it is necessary to install waterproofing, which is given great attention. The bottom is especially important. The most common and available material Is a polyethylene PVC film. Unfortunately, the film is easy enough to break and withstand the load with difficulty. It is better to lay the film in at least several layers. Ideally, another material with greater reliability should be preferred. There are also other materials with which you can make waterproofing, the most popular are: liquid rubber, liquid glass and polyurethane mastic.

By purchasing material for swimming pools, it will be possible to ensure the longevity of the pond and easy operation. A layer of waterproofing is also placed inside the tire, but only after it is already on the ground. The film should go beyond the boundaries of the reservoir by 0.5 m so that it does not slide and leak... Excess film is removed only after the final installation, when the product takes shape.

Important! Before laying the film, it is necessary to remove all sharp and protruding elements: driftwood, nails, sharp edges of stones, construction waste and other elements. Otherwise, the film will tear and you will have to redo a lot.

Strengthening

To prevent vibrations and slipping of the tire together with the film, it is necessary to fill the frame with sand or crushed stone of fraction 0-5, 5-10 along the edges. This will also provide some buffer zone between the weeds and the rate. If there is no such material under the other, then the earth will do..

Decorating

To create a unique, attractive appearance, which will decorate the site, decor is used. The most common decoration methods:

• Plants are planted at the bottom of the pond. They are usually sold in ready-to-use containers;
• Plants in tubs and pots that are set ashore. The advantage of this option is the ability to change the location of elements and thus create a unique design;
• Fish room with bright colors;
• Creation of compositions from natural materials, such as stones.

To prepare a more beautiful composition, it is better to alternate the size of the stones and their shapes.

Fish for a pond from wheels

You can run into an impromptu aquarium:

• Goldfish;
• Shubunkin;
• Comet;
• Golden Orff;
• Koi carps (only for large tire ponds);
• Minnow.

Tire Pond Plants

There are a lot of types:

• Lotus;
• Brazil;
• Gerushnik;
• Wolfia;
• Azole;
• Vodokras;
• Luronium;
• Pemphigus;
• Urut;
• Waterwort;
• Elodea.

Step-by-step analysis of creating a pond from wheels

Now let's look at the whole process step by step:

1. Determination of the location where the pond will be located;
2. Digging a hole for laying inside the tire;
3. Elimination of the top edge of the tire so that the border is smooth and without large roundings;
4. Make a sand base according to the level;
5. Tire packing;
6. Waterproofing is covered over the frame;
7. The edges should be sprinkled with sand, it should hide the rubber and create stability;
8. Stacking stones;
9. At the final stage, decoration is done, plants are placed and fish are launched.

We hope that we helped you understand the issue and now you know how to make a pond from a wheel with your own hands.

Useful videos

Conclusion

The pond will become a highlight and the most popular place for a summer residence, so it is better to do it near the gazebo, it is also recommended to install benches, swings, and recreation areas nearby. It is worth remembering that the state of the water should be monitored, periodically changing it, but the structure itself does not need maintenance. For the winter, the water is simply drained, and the plants are removed, and after the onset of warmth, everything returns to its place.

Every Russian person is famous for his ingenuity. Indeed, what kind of people on our planet will be able to find interesting use for those things that are considered trash.

Old tires with the development of the automotive industry should find their application. Therefore, enterprising people decided to make them beautiful flower beds and even attractions for children. In addition, a pool or a pond can be made from a waste tire. In this article we will tell our readers how to organize a pond in the country with our own hands step by step from tires. And besides the description, you can also see a photo here. In general, we think that this material will be useful for you.

What kind of tire is suitable for creating a summer pond

It is worth saying that the choice of a tire for the future pond is influenced by the place that you can provide to this structure. If the summer cottage does not have extra space, then your choice is a tire from a car. And if there is a lot, then you can choose:

• KAMAZ tire,
• Rear wheel of the tractor "Belarus",
• A tire from a 45-ton BELAZ.

On a note! You can always find old pond tires at a tire shop. There you can get them for free. For symbolic money, you can buy them at a car company or find similar offers on the Internet.

What pond can you make

Of course, fish cannot be raised in a tire pond. But you can plant various plants in it and along its banks. In order to hide the rubber base, you need to plant a flagstone. You can also arrange an alpine slide very close. As a result, your guests will not immediately guess what this water structure was made of.

On a note! Even the smallest pond is a danger to little kids. Therefore, it is not recommended to leave them unattended in the garden where the pond is located.

What to use to build a pond

In this article, we are talking about how to make a tire pond in the country. Of course, in order to make this structure, you need consumables and tools.

Tools:

• Jigsaw or hacksaw;
• Level for construction;
• Bayonet and shovel.

Materials:

• Stones, rubble,
• Sand, soft sealant and ornamental plants.

How to create a pond step by step

Well, that moment has come when we will describe in stages how to make a pond with our own hands from a tire. And if you rely on our instructions, then you will succeed.

Of course, the tire is first of all washed from dirt. Then the upper part of the product is cut off. The work uses: jigsaw or hacksaw for metal. A sharp knife will also work.

Then it is worth determining the place of the future reservoir. For this purpose, a sunny area is suitable, which is located in a recreation area. The pond should be located away from trees so that it cannot be clogged with fallen leaves.

At the next stage, the degree of deepening of the rubber base is determined. The pond can be located:

• On a flat ground;
• Buried in the ground by a third;
• Fully buried in the ground.

Now you need to dig a hole. It must match the shape of the tire. Moreover, it must be larger than its diameter. The depth is determined based on previous information.

The bottom must be leveled. Then it is covered with sand. In this case, the layer of sand should be 15 cm. Then the tire should be laid on the compacted bottom.

PVC film can be a soft sealant. However, it is best to use a special pool material. It is purchased in special stores. This material spreads freely along the bottom of the pool, and the edges are brought out. In this case, the length of the edges should go half a meter from the pool.

Now you need to pour water into the pool so that the material can be rationally distributed inside the tire. For fixing the material, stones are suitable that will have round shape... They are laid at the bottom of the structure at opposite ends.

The edges of the film material, which are brought outside, are straightened and covered with ordinary sand. The sand will keep them. In the future, they can be decorated with gravel. Wild turf and other materials you like will also work.

The pond that you managed to bring to life is very simple with the help of a fountain. In this case, you can use a pump small size, or a turbine with an aquarium attachment. These devices will be powered by electricity. Therefore, the wire can be put into a hose or dug into the ground.

The illumination organized by garden lamps will look beautiful, which will work from solar panels... In the daytime, such a lamp will save energy, and in the evening it will be able to give you a soft light.

On a note! If sand or gravel is used for the bottom of the pond, the water will become cloudy. In order to prevent animals from dying in your pond, moving around the summer cottage a beautiful driftwood is placed in the pond, with which they can get out of it.

How to decorate a pond from a tire. Options

As you can see, making a decorative pond from a tire with your own hands is not difficult and not expensive. It is important to follow some rules here. But in order for the pond to truly become a decoration for your garden plot, apply some decoration elements.

• So, from two large tires, you can make two ponds, which will be in contact with each other. At the time of decoration, you can install a wooden bridge at the junction. The bridge can play a decorative role or be part of the garden path.
• On garden plot ponds with overflow. For this, one pond is installed in a deepening, and the other is placed on the surface of the earth. To overflow, you need to drain rainwater from the roof of the house. You can also build a homemade waterfall.
• In order to make a waterfall, you need to draw a hose from a stone with a pressure of water. He should look out through the thickness of the pond's scenery. Water inflow will provide overflow between reservoirs. And the water itself will fall from the height of the stones.
• A large tire can be used to make a pool for children. In this case, the tire will be well strengthened, and the coastal zone is decorated with tiles. This will help ensure safe barefoot walking. For such a pool, it is worth purchasing a pump in order to filter the water.

Summing up

So you learned how to make a decorative pond from a tire. As you can see, this process is not very difficult. It is important to prepare all supplies as well as the necessary tools.