Rogersia does not bloom. Rogers, planting and care outdoors. Application in landscape design

- unusual and unpretentious of exotic plants, which, when proper care for more than 10 years will create in the garden the exquisite atmosphere of Southeast Asia. Rogersia's story is no less attractive than the flower itself.

The plant was accidentally discovered in the middle of the 19th century during an American expedition led by Admiral John Rogers. This explains why the flower, which grows mainly in Korea, China and Japan, is named after the American sailor.

Rogersia flower: description

The plant migrated to domestic lands at about the same time, as a result of expeditions to China through the Khingan Mountains, but was not described, so later the name Rogersia stuck unhindered.

Rogersia is a perennial herbaceous plant, belonging to the Kamnelomkov family, genus Rodgersia.

Despite the origin, the domestic climate is suitable for Rogers: the flower withstands winter and, with proper watering and choosing a place, survives the summer perfectly.

Plant characteristics:

• Grows in a compact bush, which is endowed with a strong root system located horizontally.
• Rogersia is a fairly large shrub, during the flowering period reaching half a meter (depending on the variety).
• Finger-dissected leaf blades up to 50 cm long, which may seem like a giant resemblance to chestnut leaves, are located on elastic, mostly pubescent, petioles.
• Rogers feature in the fact that, blooming and after flowering, the leaves acquire a purple, bronze or coffee shade instead of bright green.
• Inflorescences look like paniclesdotted with pink, cream, white small flowers.
• Flowering period, starting mainly in July, last up to a month.
• Blooming Rogersia exudes a pleasant, unobtrusive scentbesides outstanding "external data", therefore it is known as excellent.

Unfortunately, Rogers is not well known to domestic growers and, possibly, is associated with difficulties in care. However, this is a myth that can be easily dispelled.

Reproduction methods

Seed propagation

Not the most convenient way growing Rogers, because:

• the plant is capable of cross-pollination, therefore, if there are several species on the site, it will be difficult to achieve "purity", and hybrid forms are prone to return to the mother;
• the percentage of seed germination is extremely low;
• the flowering period does not occur earlier than 3-4 years.

If, nevertheless, the choice fell on this particular method of reproduction, you must follow the following instructions:

Reproduction by dividing the bush

The most used and easiest way. Advantage: delenki take the size of an adult plant in the second year.

• the bush undergoes division, usually in the fall or at the end of flowering, by cutting off a small extreme part of the root system;
• the seat in size should exceed the size of the rhizome;
• the planted part of the rhizome is deepened by about 6 cm;
• before planting, it is imperative to lay drainage and apply organic fertilizers.

Propagation by cuttings

Rogersia cuttings form both from rhizomes (root cuttings) and leaves (leaf cuttings).

When propagated by root cuttings:

When propagated by leaf cuttings:

• the strongest leaf is selected and torn off so that the whole point of growth ("heel") is preserved;
• the stalk is placed in a container with a germination stimulator;
• after the appearance of roots, the plants are transplanted into pots with a soil mixture for rooting (a substrate with sand is often used);
• the best time for planting in open ground is spring, so that the plant has time to get stronger a year before the arrival of cold weather.

How to grow more crops?

Any gardener and summer resident is pleased to receive a large harvest with large fruits. Unfortunately, it is not always possible to get the desired result.

Plants often lack nutrition and minerals

It has the following properties:

• Allows increase yield by 50% in just a few weeks of use.
• You can get a good harvest even on low fertile soils and in adverse climatic conditions
• Absolutely safe

Preparation for planting in open ground

The choice of planting material

Planting material can be obtained in two ways:

• grow yourself from cuttings (seeds);
• purchase a seedling at a specialized point of sale, as well as a nursery.

In any case, uniform criteria are applied to the choice of a seedling:

1. the presence of dried out parts or damage is unacceptable;
2. special attention is paid to the rhizome: it must be strong, whole and healthy.

When choosing seedlings, they stop at those that have the most developed root system, which will allow the young plant to take root faster in a new place.

Choosing a landing site

When planting a Rogers in a permanent place, first of all take into account that it is hygrophilous, and direct sunlight can harm, therefore:

• Places in partial shade are recommended for planting (the plant will feel comfortable under the canopy of spreading trees, near the walls of buildings).
• It is good to plant Rogers near a pond (in no case should you forget about drainage).
• Landing in areas open to winds and drafts is inadmissible.

Particularly carefully prepare the soil, which has the following requirements:

Landing in open ground

Planting in open ground is the most important stage in growing Rogers, since improperly selected conditions or disturbed planting technology can destroy it. To avoid this, you need to know the answers to two questions.

When to plant Rogers?

When propagating rogers by cuttings or seeds the optimal time for planting seedlings is considered April-Mayso that the plant that has not yet matured is not cold, the frost does not damage it and it has time to get stronger by the winter.

Delenki, planting parts of the rhizome, are planted both in early autumn (subject to winter insulation) and in mid-late spring.

How to plant Rogers in open ground - planting technology

When planting Rogers outdoors, it is recommended to follow these instructions:

Rogersia takes root well and with proper subsequent care, the seedling will quickly get stronger, and after 2-3 years it will give it the first flowers.

Stories from our readers!
“I am a summer resident with many years of experience, and I started using this fertilizer only last year. I tested it on the most capricious vegetable in my garden - on tomatoes. The bushes grew and bloomed together, they gave more harvest than usual. And they did not get late blight, this is the main thing.

Fertilizer really gives more intensive growth of garden plants, and they bear fruit much better. Now you cannot grow a normal crop without fertilizing, and this feeding increases the amount of vegetables, so I am very pleased with the result. "

Rogers care

Rogersia is not a demanding and persistent plant, however, do not forget that it has its own little whims, therefore, to ensure proper development, it is better to familiarize yourself with some of the features in care.

Top dressing and fertilization

A plant without timely feeding and fertilization will suffer, so they cannot be neglected throughout the entire growth period.

Watering

The plant is very susceptible to drought, since shady forests are native to him. Therefore, watering should be regular and abundant (it is desirable that the water penetrates at least 20 cm deep into the root soil). Sprinkling is recommended in summer. The most abundant watering time is late spring and summer. Watering is reduced by mid-autumn.

Caution: if the planting site is located near a body of water or other source of standing water, moderate watering and drainage is required.

Loosening and mulching

Rogersia needs regular loosening so that the rhizome can breathe and does not attract pests.

To prevent moisture from evaporating quickly, a planting circle is recommended. This can be done after disembarkation and after the next loosening. Mulch, as a rule, are peat or tree bark, which can also be a good top dressing.

Diseases and pests

The shrub is resistant to fungal infections. In addition, it has an antibacterial effect that prevents pathogenic diseases and insect attacks.

Preparing for winter

Rogersia is frost-hardy, so it winters well, withstanding frosts down to -25 C, but you should not risk neglecting insulation, especially when it comes to seedlings planted in the first year.

• You should think about preparing for winter even when planting Rogers in a permanent place.: it should be chosen so that the snow melts on it last - this will protect the plant from damage by spring frosts.
• If the rhizome is exposed, it needs to be covered with soil.
• In late autumn, for warming, the rhizome should be covered a layer of woody foliage, spruce branches or humus.

Rogersia feathery is an exception: a layer of insulating material will need to be denser, since it is less frost-resistant.

A separate stage in preparing a plant for winter is pruning. Peduncles, dried leaves and petioles are removed all summer. But in the fall, the shoots are cut to about the length of the palm.

Transfer

Being a perennial, Rogers can grow without transplanting in one place for more than 10 years. But if a transplant turned out to be necessary, it is best to do it in mid-late spring. Although transplanting is also permissible in early autumn (after the end of flowering), in this case, special attention is paid to preparing for winter.

Rogersia transplant technology corresponds to the process of planting seedlings in compliance with the following recommendations:

• drainage must be laid;
• organic fertilizers are applied to the hole;
• the rhizome should not show through the topsoil, however, it should not be grounded more than 8-10 cm.

Why isn't Rogers in bloom?

This question often arises among gardeners who first start Rogers on their site. But don't panic ahead of time! The first flowering period occurs 3-4 years after planting. In the first two years, the plant develops slowly, but then it activates in growth.

Types and varieties of Rogers

Rogersia horse chestnut (Rodgersia aesculifolia)

It is sometimes called chestnut leaf. This popular type of Rogers has impressive dimensions, reaching a height of one and a half meters. The name is due to the similarity of the leaves with chestnut leaves.

The flowering period lasts a month, coming in early to mid-July, pleasing the eye with massive paniculate inflorescences of cream or pale color pink... In addition to visual originality, during the flowering period Rogers chestnut leaves a pleasant delicate aroma. After flowering, the leaves take on a bronze or purple hue. It has no peculiarities in care.

This species includes the following varieties:

Rogersia pinnata (Rodgersia pinnata)

Unlike the chestnut-leaved, the pinnate Rogersia has a smaller size - 60-80 cm in height. The main feature is the leaves, which look like huge rowan leaves, which have a red, bronze, terracotta edging. The inflorescences are not large, but their colors are saturated (up to burgundy).

It blooms almost a month later than its counterparts. In the care of feathery Rogers, more thorough protection from winter and especially spring frosts is recommended.

Among the most common varieties of the species are:

Rogersia sambucifolia (Rodgersia sambucifolia)

Low-growing species, curtain height - up to 70 cm. It is named so because the pinnately dissected leaves with deep grooves are similar in shape to elderberry leaves, but have a characteristic bronze tint. The inflorescences blooming in July have a soft creamy or white-pink color, as well as a pleasant aroma. This species does not tolerate high frosts, therefore it is rarely grown in domestic gardens.

Famous variety - Kupferschein, more common in Austria and Germany, where winters are less severe. Endowed with large bronze-green leaves with fragrant cream flowers.

Rogersia stoolis or polofyllovaya (Rodgersia podophilla)

A large representative of the family, which can reach 160 cm at flowering. It differs in the peculiar shape of the leaf plate, resembling maple leaves due to cuts along the edge, which has a green (before flowering - bronze) shade. The flowering period begins in mid-June, branched paniculate inflorescences are abundant in creamy white small flowers. Known in culture for about 150 years.

The following varieties belong to Rogersia podophyllum:

Rogersia tabularis (Rodgersia tabularis)

It has many differences from its species counterparts:

• At first, it reaches no more than 30 cm in height (while the diameter of the bright green leaves is about 70 cm, and the length of the peduncle is 1.5 m).
• Secondly, an undivided embossed leaf blade vaguely resembles geranium leaves in shape, which makes it unique among other species.

The flowering period is July, lasts almost a month, delighting with large inflorescences (up to 25 cm long) with small cream-colored flowers. Rogersia lamellar is represented by only one variety - lamellar astilboides, which is rare in floriculture.

Rogers in Landscaping

Due to its impressive size, Rogers is not grown for cut and is practically not used by florists when creating bouquets. Its exclusive advantage is the decoration of the garden, large flower beds, the banks of reservoirs.

The flower will be a great addition to a large rockery, as it develops normally on rocky soil.

Original compositions can be obtained by planting Rogers in the shade conifers, such as , yews, as well as - spreading deciduous trees. Oddly enough, Rogers will develop normally under willow or pussy willow.

Choosing smaller neighbors, it is best to dwell on other perennials that love moisture and partial shade:

• fern;
• decorative rhubarb;
• astilbe.

This elegant giant is often planted against walls and fences, decorating them, and can also serve as a frame for paths.

Using Rogers in landscape design, take into account that it grows rapidly, therefore, do not allow crowding when planting in compositions.

Conclusion

If you want to grow an unassuming exotic flower on the site, Rogers - perfect solution... It will become a decoration of shady places, the basis of compositions and rockeries. The main thing is to be patient, and Rogers will thank you for this with years of friendship. Don't be afraid to experiment!

Many gardeners still ignore Rogers, and absolutely undeservedly. This is an ornamental leafy plant that is found naturally in China. The culture itself has a high decorative effect, frost resistance and unpretentious care.

From this article you can learn a lot useful information about planting and growing Rogers in open ground... We have prepared for you descriptions of the most popular crop varieties with photos, as well as the main methods of reproduction and the technology of planting this ornamental plant in open ground.

Features and description of Rogers

According to the biological classification, Rogersia belongs to the Kamnelomkov family. All representatives of this species are distinguished by high vitality: they perfectly take root on almost any soil, they tolerate cold and lack of moisture well, but at the same time they are highly decorative. Rogersia is no exception. It is a fairly large plant with large leaves and a panicle-shaped inflorescence (Figure 1).

Figure 1. External features of Rogers

Despite the fact that Rogersia belongs to exotic plants for our latitudes, it will be an excellent decoration for the garden, since it can be planted even in areas unsuitable for growing others. decorative crops.

The main types and varieties of Rogers

In general, all types of rogers are usually divided into groups according to the shape of the leaves: palmate-lobed or finger-split. In total, there are about eight varieties of crops, most of which are found in the forests of China and Japan.

Let's consider in more detail the main varieties of culture and their characteristicsso that you can choose yourself suitable view for your garden (Figure 2).

Horse chestnut

This variety got its name due to the similarity of leaves with chestnut ones. Under natural conditions, this plant can still be found in the mountainous regions of China, although Kansk-chestnut-leaved Rogers has been used for many years to create a unique garden decor.

The peculiarity of the variety is that young leaves have a bronze tint, but, as they mature, they acquire a rich green color. Representatives of the species are quite tall: during the flowering period, the height of the shrub can reach one and a half meters. The variety is given decorative value not only by large leaves of an unusual shape, but also by small white or pink inflorescences, collected in lush panicles.

Plumose

In nature, the feathery culture is found only in certain provinces of China, which makes it a rare guest in ordinary gardens. But at the same time, the culture has a high decorative value and is gradually gaining popularity among gardeners.

Figure 2. The main varieties of culture: 1 - horse chestnut, 2 - pinnate, 3 - elderberry, 4 - Cherry Blush

This variety has large pinnately-divided leaves, and the height of an adult plant exceeds a meter. In addition, the culture has a thick, branched stem, above which, during the flowering period, a high arrow appears with small white inflorescences collected in panicles. It is noteworthy that the flowering period begins in July and lasts almost a month.

Elderberry

This variety can be found in the pine forests of China. During dormancy, the plant is quite large, but during flowering, thanks to an arrow with creamy white inflorescences, its height reaches 1.2 meters.

The variety gets its name due to the unusual shape of the leaves, which resemble elderberries. Unlike other species, the leaves of Elderberry Rogers do not change color as they mature: they remain green with a slight bronze tint throughout the growing season.

Cherry Blush

The cherry blush variety is especially decorative. Unlike other species, the flowers of which are most often white, cream or light pink, this variety has an unusual cherry-pink shade of buds. In addition, the leaves of plants of this species, when blooming, have a chocolate hue, then gradually brighten, and in the fall they acquire a rich red color.

This variety is excellent for growing in shady areas of the garden. Despite the fact that a certain amount of light is still required by the plant for normal development, it tolerates partial shade much better, and direct sunlight is detrimental to the culture.

Rogers breeding methods

There are several ways to breed Rogers. For this purpose, you can use crop seeds, cuttings or the method of dividing the bush. Since each method has certain features, we will consider each of them in more detail (Figure 3).

Seeds

It is very difficult to propagate a culture by seeds. Firstly, not all seeds germinate after sowing, even if they have been pre-treated. Secondly, get full adult plant when using this method, it is possible not earlier than after a few years.

Due to the difficulties of growing a crop using this method, cultivation from seeds is practiced only by professional breeders to preserve the species characteristics of a certain variety.

Reproduction by dividing the bush

Dividing a bush is a simple, but quite effective method of obtaining high-quality planting material at home. The procedure is best carried out in the spring, so that young plants have time to fully root by winter, but in southern regions with warm and little snowy winters, the separation of an adult bush can be carried out in the fall.

To plant Rogers, you need to carefully remove an adult plant from the soil along with an earthen lump, carefully divide it into several parts and transplant it into a prepared bed. Young plants need high quality watering for quick acclimatization in a new place.

Figure 3. Methods of plant propagation by seeds and dividing the bush

In addition to directly dividing the bush, you can get full-fledged plants by dividing the rhizomes, but, unlike dividing the bush, the procedure is carried out in the fall, and not in the spring. After the end of the flowering period, during the preparation of the plant for wintering, it is dug out of the ground, and the root system is carefully cut into small pieces, no more than 10 cm long. The workpieces are planted in separate boxes, immersed in the ground by 5-7 cm. The containers are transferred to cool room and store for 4 months, periodically moistening the soil. When sprouts appear, they are transplanted into separate pots with peat soil, and in the spring they are transferred to a permanent place in open ground.

Cuttings

Another simple but effective method of propagation is the cuttings method. For this purpose, at the beginning of summer, you need to cut a sufficient number of leaves with a heel, process their lower sections with a solution of a root-forming preparation and place them in containers with sandy soil.

After rooting, the cuttings will be ready to be transplanted into open ground and can be transferred to a permanent place in the flower bed.

Preparation before planting Rogers in open ground

Despite the unpretentiousness of the culture, certain rules for planting Rogers in the ground should still be followed. This will help to grow a strong plant that will become a real garden decoration or an original element of a flower arrangement.

In order to properly plant and ensure the full development of the culture, it is necessary to follow certain recommendations for the selection of seedlings and places for the future placement of the culture.

Selection of seedlings

There are no specific rules for choosing seedlings specifically for Rogers, since the selection of planting material is carried out according to the same scheme as for other floral or deciduous crops.

Firstly, it is better to purchase planting material from a trusted manufacturer. This way you can be sure that the seedlings are grown in optimal conditions and are not infected with fungus or other diseases. Secondly, when buying, you need to carefully examine the roots of the plant: they should be strong and well developed, without signs of dryness or decay. It is such planting material that can ensure the successful cultivation of adult plants.

Choosing a landing site

If the choice of a seedling is considered standard, then the selection of a place for planting a crop should be considered more carefully.

When planning the placement of Rogers on the site, you should take into account the following features:

1. It is better to choose a shaded place, since the culture does not tolerate intense lighting and exposure to direct sun rays.
2. The plant bed should be large enough, since as it grows, the bush takes up a lot of space and can oppress neighboring plants.
3. The culture can be used to decorate the banks of reservoirs. It should be borne in mind that for all the moisture-loving culture, the culture does not tolerate stagnation of moisture at the roots. Therefore, with a close location of groundwater on the site, additional drainage should be arranged.

If you plan to grow several types of Rogers at once, you need to provide separate beds for them. The fact is that with a close placement, varieties can be pollinated.

Selection and preparation of soil for planting

Although Rogersia belongs to unpretentious crops, and grows well on any soil, it is better for it to choose fertile areas with a high humus content in the soil. In addition, before planting, the land must be thoroughly processed: free from weeds and their roots, dig up and loosen.

Before planting in the soil, it is advisable to apply fertilizers: peat, humus or manure. Rogersia develops well without additional feeding, but with them the shrub will quickly take root in a new place and begin to bloom. If the site has a high level of groundwater, a drainage layer is laid at the bottom of each planting hole to protect the plant roots from waterlogging.

Open ground planting process

After you have chosen the site and the seedling of the culture, you can proceed directly to planting. First of all, you need to prepare a flower bed: remove all weeds, dig up the soil and add peat, humus or compost to it (Figure 4).

Plant seedlings are placed in the prepared holes. It is important to take into account that the roots are buried in the soil, no more than 6 cm.

Note: If the soil in your area is too wet, or the groundwater is close to the surface, a layer of drainage is placed at the bottom of each hole. This will protect the roots of the plant from excessive moisture and decay.

The planting holes are sprinkled with a layer of fertile soil, slightly compacted and watered abundantly. It is advisable to lay a layer of organic mulch on top, which will prevent evaporation of moisture and loss of nutrients.

Features of care for Rogers in the open field

Among all garden ornamental crops, Rogersia stands out for its unpretentiousness. If you have chosen the correct landing site and selected high-quality planting material, adults flowering plants will appear on your site in 2-3 years.

Figure 4. Features of planting and placement of a flower on the site

IN further care behind the culture, it can also not be called difficult, since growing a plant does not require special attention from a gardener, although it includes some standard activities typical for most crops.

Watering

Rogersia belongs to moisture-loving crops, therefore, the earthen coma should not be allowed to dry out. It is important to take into account that the soil should not be too moist and dense: in such conditions, root decay may begin and the plant will die.

In hot weather, it is necessary to provide the culture not only with abundant and regular watering, but also with optimal air humidity. To do this, in the morning and evening, you need to spray the leaves and stems of the plant with water at room temperature.

Loosening and mulching

Periodic loosening of the soil should be a prerequisite for maintenance. It should be done after every watering or natural rainfall. Without loosening, the soil will become too dense, moisture will begin to stagnate at the roots and can cause them to rot.

Mulching also applies to mandatory conditions care of the culture. A layer of organic mulch laid on the garden bed will prevent moisture loss and weed growth. Accordingly, the gardener will need to pay even less attention to the plant.

Top dressing

Despite the fact that Rogesia can be grown without special fertilizers or fertilizing, the culture will respond positively to the introduction of organic and mineral fertilizers.

As a rule, phosphorus, potassium and nitrogen are used to feed the crop, but, in addition to these elements, the fertilizer must include copper, zinc, magnesium and molybdenum. Such substances are applied during the entire growing season, but they are especially important during active growth in early spring and during the flowering period in summer.

Pest and disease control

Among all horticultural crops, Rogers has the highest resistance to diseases and pests. This is ensured by the antiseptic properties of the plant itself, so most pests do not settle on Rogers, and fungal and viral diseases do not appear.

The only problem that can arise during cultivation is rot. However, it only occurs if the crop is planted in a waterlogged area, or the irrigation schedule is too intense.

Preparing the plant for winter

Despite all the unpretentiousness of Rogers, it requires increased attention in the fall, when all crops are being prepared for winter. If there is a lot of snow in your area, the plant does not need to provide a special shelter, it is enough to cover the roots with a layer of organic mulch. It is important to take into account that the less snow cover, the thicker the layer of mulching material should be.

Figure 5. Options for creating flower arrangements

The only exception is the feathery variety: these plants need a more reliable shelter, since they naturally grow in warm climates and can freeze out during the cold season.

Using Rogers in Landscaping

The lush leaves and original paniculate inflorescences of Rogersia make it suitable plant to decorate the garden and create flower arrangements... For example, it can be used to create original jewelry from stones, as well as for decorating the banks of reservoirs. At the same time, in plants planted precisely along the edges of reservoirs, the leaves acquire especially bright colors in autumn (Figure 5).

The shade-loving Rogers can also be used for landscaping shady areas of the garden, where only certain groups of plants can grow (for example, hosta or fern).

You can find out more information about this amazing flower from the video.

Sometimes on their own personal plot I want to plant some interesting and extraordinary, if not mysterious, plant. Most of these exotic garden pets, which you can buy in flower shops, are very capricious and require laborious care.

And yet, among the "exotics" you can always pick up a cute, and most importantly, unpretentious plant, which can be used to nicely decorate an empty flower bed or front garden. Today we will talk about such an ornamental deciduous plant as Rogersia, talk about how to plant it in open ground, grow and care for this garden crop, and also how to propagate it correctly.

Rogersia: varieties and varieties

Cute exotic Rogers is a large plant that has effectively settled in parks and alleys of European cities. This horticultural crop is named after the American Admiral Rogers, who, upon seeing the charming plant, decided to take it out of China. By the way, about 9 species of Rogers grow there. Despite its beautiful and picturesque appearance, unpretentiousness and amazing resistance to the whims of nature, in Russia long-term Rogers is still gaining its popularity.

Exotic culture takes root in our gardens

This garden culture belongs to the saxifrage family. Each Rogersia plant attracts with its monumentality and decorativeness. Growing more and more every year, this perennial plant forms a mighty flower bed, which consists of many vegetative rosettes and is completely strewn with flower stalks directed into the sky.

The length of the peduncles is impressive: it can reach 1.5 meters. Rogersia blooms from the beginning of spring to the end of summer with beautiful inflorescences of snow-white, pale yellowish and pinkish flowers, thinning the most delicate aroma. And all this beauty is surrounded by spectacular large leaves juicy green.

Rogers horse chestnut

To distinguish Rogers, it is enough to look closely at the leaves: they can be finger-dissected or feathery. Most common horse-chestnut rogers... The plant got such an unusual name due to the interesting shape of its leaves: they have clear similarities with the leaves of a horse chestnut.

Rogers foot

Finger-dissected leaves boasts and foot rogers... True, the leaves have one feature: large teeth are located along the edge, and at the end they seem to be cut off. The flowering of this species can be observed a little earlier than the others, and it spreads more actively.

Rogers feathery

Feathery rogers has leaves of a pinnate and slightly elongated shape. Their length can reach 50 cm. This species will decorate your garden with juicy pink, creamy and white flowers.

Planting a plant

In order for Rogersia to tirelessly delight you with colorful flowering, and its foliage does not lose its lush shape and emerald hue, the soil for planting must be enriched with humus, peat or compost. The root system is buried in the prepared soil by only 4-7 cm.

Before planting Rogers, be sure to enrich the soil with fertilizers.

After 2-3 years after disembarkation, Rogers will reach adult size. This fact should be taken into account if you are thinking about creating decorative flower arrangements in landscape design. The right planting site and nutrient-rich soil are half the success of growing a beautiful and healthy plant.

Rogers care

To look after garden plant very simple: with the onset of spring, Rogers is cleared of old leaves, the soil is mulched, and the culture is fed organic fertilizers... Protect the plant from spring frosts need using non-woven fabric.

Attention! If you notice that the roots are slightly protruding from the soil, then they need to be covered with earth.
After the plant has bloomed, all peduncles are carefully cut off, dry and ugly leaves are removed, and closer to autumn, all shoots are cut off.

Fertilizing and feeding

The Exotic Rogers will gratefully respond to organic and mineral nutrition, which is considered an essential element in crop cultivation.

Feed your crop during the growing season to keep it blooming

In addition to phosphorus, potassium and nitrogen, a comprehensive feed for Rogers should contain the following trace elements:

• copper;
• zinc;
• sulfur;
• molybdenum;
• magnesium.

Top dressing is applied throughout the growing season, but it is especially important to help the plant during the period of active growth and flowering.

Reproduction of Rogers

If it becomes necessary to divide the bushes of the culture, then choose the spring or autumn period for this. For planting plants, you can use by dividing rhizomes... With the onset of autumn, the root system is cut into small pieces (up to 10 cm) and planted in special boxes to a depth of 5-7 cm. For about 4 months, these boxes should be kept in a room with a temperature of +5 - + 10 ° C, and the soil in them should moisturize periodically. After the culture has germinated, it is transplanted into a peat pot, and in the spring - into the ground.

The easiest way to propagate rogersia bushes is by dividing rhizomes

Seed propagation is rarely used. And all because the germination of seeds is low, and the plants themselves will bloom only after 3-4 years.

Diseases and pests

Rogersia is insensitive to pests and practically does not get sick. It is extremely rare that fungus or rot is found on it. But if this happened, then the affected shoots are necessarily removed, and the plant is treated with a fungicide solution for preventive purposes.

Rogersia: Combination with other plants

Due to the fact that Rogersia is very beautiful and decorative, in combination with other plants, it forms unusual and picturesque plant compositions. A wonderful neighborhood is revealed with bergenia, fern and delicate bells. The plant also looks very impressive in single-species flower beds, comfortably located in a darkened place, for example, under the crown of a tree.

Rogers in the flowerbed

Tall plants are also suitable as companions: with them they will create a single horizontal surface. The motley mess, which is formed by rogers of various species and other shade-tolerant perennials (this can be red horned goat weed, lungwort, periwinkle), looks beautiful.

Rogers in Landscaping

Using this exotic plant, you can effectively decorate any flower bed, mixborder, improve an artificial reservoir or pond. Perfectly complements the Rogersia and the rocky garden, it fits in interestingly with large rockeries, where it will act as a high-rise dominant. But on small alpine slides it is better not to use a Rogers due to its height.

Growing Rogersia: video

Rogers: photo

4 minutes read

Perennial rogersia bushes can be a bright accent in your landscaping garden. Even in shady corners, the rosettes grow into an impressive curtain, so in a close-up photo it can be mistaken for a blooming one. With the only difference that Rogersia reaches no more than 1 meter in height and peduncles rise above the branches of the plant.

Plant features

Rogersia belongs to the Kamnelomkov family. These perennial plants have small nondescript flowers, but due to the fact that they are collected in large paniculate cone-shaped inflorescences, their candles look quite impressive. In the wild, only the white color of Rogersia flowers is known. Hybrid varieties that are cultivated in the open field have other shades - cream, yellow, pink.

Rogers podophyllum

Rogersia belongs to decorative deciduous plants. Large foliage depending on the variety, it is not only green, but also purple, crimson, copper shades. The shape of the leaf can also vary. The uneven edge of the leaf blade frames the jagged edge of varying degrees of dissection.

The combination of the unique characteristics of Rogersia, both decorative-deciduous and decorative-flowering, makes these perennials an excellent choice in landscape design both for decorating flower beds and flower beds, and for creating hedges. In addition, its spreading bushes are used for:

• framing garden paths;
• registration of banks on artificial reservoirs;
• for decorating gazebos, benches, benches and other garden furniture.

Reference. Growing Rogers in the shady corners of summer cottages succeeds well in the company of periwinkle, fern, badan, hosta. A perennial looks harmoniously next to conifers: spruce, juniper, thuja.

Varieties and types of Rogers

The genus Rogersia is considered one of the smallest in the Kamnelomkovy family - less than a dozen species are known. The homeland of the plant is Southeast Asia. Rogersia can often be found in the gardens and city parks of Japan, China, Korea, and the pine forests of Asian countries.

Rogers horse chestnut

The following varieties of this flower are grown on their site:

• Rogersia podophyllum or stoolist;
• Rogersia horse chestnut;
• Rogersia Henrici;
• Rogers plumose;
• Rogersia elderflower.

Preparing for landing

In order for a luxurious Rogers to settle on your site, cultivation should take place in diffused sunlight or in partial shade of lace foliage of trees. Planting can also be done in an area that is well lit in the morning hours - this sun will not cause inconvenience to the plant.

Rogersia Henrici

This is one of the few perennials that grow well in damp conditions. But this should not be confused with stagnant water - from this, the roots of the plant begin to rot.

Council. Rogersia prefers humid air. This feature is taken into account in landscape design when planning group plantings in open ground - the presence of other flowers retains moisture longer.

Planting is carried out on soil rich in humus. In impoverished areas, deciduous soil, matured compost or humus are introduced for digging. This will not only improve the quality of the soil, but will also contribute to better oxygenation and create good soil drainability.

Landing

Reproduction of Rogers by dividing the bush is carried out both in spring and autumn. Reproduction by dividing the rhizome is recommended to be carried out only in the fall. In this case, the cultivation of the cut begins at indoor conditions in containers with a nutrient substrate. In the open ground, they are buried in only next spring.

Rogers feathery

Seed propagation is a more laborious process. For cultivation to be successful, you must adhere to the technology:

1. In early spring, the seeds are planted in a moist nutrient medium.
2. Crops are left indoors at a temperature of about 0 ° C.
3. After 2-3 weeks, warmer conditions are created, keeping the thermometer at around + 10 ... + 15 ° С.
4. When the seedlings grow to a size of 10 cm, they are dived into separate cups.
5. Sprout care includes watering, fertilization with mineral fertilizing.
6. With the arrival of positive temperatures outside the window, the seedlings begin to harden in the open air.
7. In the open field, Rogersia is planted in the fall.

Important. If the florist plans in the future to independently collect seeds for reproduction, the birth is planted at such a distance that the flowers cannot be pollinated.

Further care

The perennial is not capricious, minimal care will ensure the decoration of the garden with Rogers for decades. Mandatory measures are abundant watering and mulching of the soil. When the plant lacks moisture, the tips of the leaves begin to dry out and the plant loses its overall decorative appearance.

Rogers Elderberry

In the fall, pruning of non-viable shoots is performed, peduncles are removed. Rogersia is a hardy plant and hibernates outdoors. But with the arrival of severe cold weather, it is better to cover the flower with a spunbond.

The real owner and inveterate gardener is always visited by the desire to plant some exotic and original plant in his possessions. Such an intention can cause a gamut of positive emotions in a person and significantly raise the mood of the owner of the land plot. But most of the plants from exotic regions that are on the market are quite capricious to care for and need systematic care. In most cases, having spent a decent amount of money, the gardener does not even have time to admire the bright flowering. The plant, contrary to the seller's promises, quickly dies and does not stay on the site during one flowering cycle. As a result, there is an empty space in the garden. But you shouldn't be sad. "Exots" are also found unpretentious. The decorativeness of such plants is impressive. Rogersia flowers are a great option from the family of decorative leafy plants.

The outward beauty of Rogers is pretty impressive. A green and rich image is formed by the finger and feathery leaves. A powerful and strong rhizome is the fundamental basis for the growth of the relief and long petioles of the plant. Rogersia horse chestnut has the largest and most powerful leaves. The bush has a rounded shape and is compactly placed in any front garden. The pinky white and creamy colors attract insects and have a pleasant scent. The peduncle develops into a panicle up to 150 cm. The inflorescence begins to actively bloom in the middle of July and lasts at least 40 days. In autumn, exotic leaves will perfectly decorate the site and will acquire bronze, raspberry and purple color. Popular Rogers varieties Cute exotic Rogers is a large plant that has been located in the parks of European cities for a long time. The American admiral generously borrowed his surname for this plant. The thing is that the famous military man decided to bring a picturesque wonder to his homeland from China. In the climatic zones of Russia, this find has found wide distribution and pleases the eye of many summer residents and gardeners. This garden culture is proudly listed in the saxifrage family. The decorativeness and monumentality of this plant attracts the attention of any person. Over time, a modest bunch will grow into a mighty bush, which will consist of vegetative rosettes and a large number of peduncles. The inflorescences stand out in bright colors (pale white, yellow and pink) and have the most delicate aroma. A beautiful picture complemented by juicy green leaves with textured proportions. Rogersia Horse-chestnut In order to distinguish Rogers, you need to look closely at the leaves. They can be either dissected or feathery. Rogersia Konskokastanolistnaya has common features with horse chestnut leaves. This view has shiny leaves, which in turn are divided into seven sinewy leaves. The stems of the plant are strong. Flowers are pink-white in color with a height of up to 120 cm. At the very peak of ripening, the inflorescence of the foliage acquires a bronze-green hue. The shrub is great for planting near gardens and natural bodies of water. It is massively found in the mountainous regions of China, where the height reaches 3000 meters. When blooming, the leaf acquires a fabulous beet-bronze pigmentation. This is followed by a fresh green color scheme with pronounced veins. Panicles are up to 30 cm long and are located on sturdy stems. Flowering lasts for a month. The plant has become widespread in Europe since 1902. Stop Rogers The stop rogers can boast of finger-dissected leaves. A feature of this plant is the presence of large denticles along the edges of the petioles. This species begins to bloom earlier than its "brothers" (end of June) and occupies a large area of \u200b\u200bland. The cultural distribution area covers the territory of North Korea, the highlands of China and Japan. The shrub reaches a height limit of 120 cm during flowering. Before that, the figure is about 95 cm. The creeping rhizome forms an integral nutritional system. Finger-dissected leaves have a diameter of 40 cm. The panicles are rather loose and consist of creamy white flowers. The period of generative reproduction lasts about 28 days. Rogersia has been widely cultivated since 1870. Rogers feathery The feathery shape of the leaves was put in the name of the ornamental plant. The length of the formations can reach 50 cm. And juicy white, cream and pink flowers colorfully complement the landscape setting in the yard. The bush originates from the Yunnan region. The alpine forest has become a reliable home for a moisture-loving culture. The petioles are large, strong, up to 100 cm long. During the blooming period, the foliage acquires a purple hue, then tends to a dark green color. The venation is quite noticeable and prominent. The complex panicle consists of fragrant flowers that appear in the first half of July. Most popular garden form is Alba and Superba. These hybrids are widespread in the formation of phasend plots and plots with ornamental plantings. Buying Rogers at the moment is not a big deal. Rogers Elderberry The Rodgersiasambucifolia plant originates in Yunnan and Sichuan. The mountainous terrain of this region is famous beautiful landscapes... The bush grows at an altitude of 2800-3300 meters in pine forests. During the period of vegetative growth, the height of a representative of the flora reaches 70 cm, and at the time of flowering - 120 cm. The leaves are pinnately dissected with a bronze overflow firmly resembling an elderberry. Fragrant panicles are composed of creamy white and small inflorescences. The plant is rarely used in landscape design. In practice, it is even difficult to get it from professional collectors, because the bush grows very slowly. Rogers' features One of the key and positive properties Rogers is its ease of care. In order to successfully position the plant on garden plot, you need to carefully study the features of the exotic "guest". First, the plant feels most comfortable in a dark place with moist soil. Secondly, light and nutritious loams are the most the best option for the growth of a tree bush. The Far East has generously enriched country cottage area caring gardener. The process of acclimatization and long-term cultivation exotic plant was successful. The mountainous regions of China, Korea and Japan stand out for their beauty. Along the banks of rivers and lakes, the majestic Rogersia proudly grows. Powerful leaves reach a height of 1 m, which gives the plant greatness and texture. Paniculate inflorescences of white and pink color fit perfectly into home interior garden plot. Rogersia chestnut is widespread. The plant loves wet land, which is full of organic matter. Only those places that are completely shaded are undesirable. The formation of a large mass of leaves and large flowering is achieved through the selection of a site closed from the wind. Moderate watering and competent feeding are the key to the normal development of the plant. Winters with little snow are absolutely not terrible for the plant. But spring frosts during the awakening of the bush can create unexpected trouble. Culture can, if not be lost, then lose its decorative effect and the likelihood of lush flowering. A pond in a private backyard can be beautifully decorated with this beautiful plant. A subtle combination decorative stones and an exotic representative of flora allows you to achieve a beautiful effect in the design of the space. Planting Rogers and outdoor care is not too difficult for a grower. Secrets of Successful Actions: When purchasing a plant, you need to stop the final choice on large divisions. This is due to the fact that the large variant takes root the best and easily acclimatizes. Spring frosts can seriously damage even the most powerful and healthy plant. Therefore, it is worth protecting the leaves and rudiments of inflorescences. Before a cold snap, it is recommended to cover the bush with woven material and a natural blanket (leaves, sawdust, etc.). Snow-white winters are often accompanied by severe frosts. Often, the buds are damaged and slow down the spring development of the plant. Therefore, after pruning, you need to sprinkle the crop with cow compost or dense woody foliage. Leading agronomists and gardeners have created recommendations for feeding. This process will significantly affect the quality development of the entire bush. The action takes place in May or July. For this, complex fertilizers and a diluted solution of an organic mixture are used. Planting, care, feeding and reproduction of Rogers The key principle when planting a plant is the rational introduction of humus, compost or peat formations. In this case, the plant will definitely respond to the care and delight you with a beautiful inflorescence. The root system goes deep into the ground up to 6 cm. And the exotic bush reaches a large size within 3 years after planting. The unique property of Rogers is based on the absence of the need for a transplant up to 10 years. First of all, you need to dig a deep hole and place a mixture of humus from leaves and manure there. Sand and brick chips are used as drainage. Removal from the pot takes place after thorough watering so that the root system is in an earthen coma. The rhizome is placed in a depression in the ground and compacted tightly. To retain moisture in the soil, mulching is required (sunflower husks, straw or chopped bark). The period of active plant growth requires systematic watering. In the final autumn period, the bush is cut at the root. This allows the plant to "fall asleep" and beautify the garden next year. The bush is winter-hardy and can withstand frosts down to -25 ° C and does not require additional shelter. Although a light cover with leaves will not hurt at all. Rogers is rarely exposed to disease, this is due to the fact that it contains antiseptic substances. There should be good drainage under the rhizome. Otherwise, the process of decay will begin. The big enemies of such a planting are grape snails and ill-fated slugs. Often there is a rust fungus on the leaves of the bush. Damaged areas should be removed and treated with an effective fungicide. The chemical treatment process is carried out in the warm season and in the morning. In this case, the leaves of the plant must be in a dry state. Rogersia and caring for it is simple enough. The loss of leaves and flowers will indicate improper care. The main cause of death is a radical lack of moisture. Powerful wind and dangerous rays of the sun can provoke the appearance brown spots... Transplantation is an effective measure to save culture. Organic and mineral supplements are a great addition to exotic Rogers. Complex application of copper, zinc, sulfur, molybdenum, potassium, nitrogen, and magnesium allows you to activate growth and maximize the growing season. This activity is especially necessary in the growth and development phase of a young bush. The plant reproduces quite simply. In the spring, knowledgeable gardeners divide the rhizome into several parts and plant it on a pre-prepared area. The second half of summer allows Rogersia to be propagated by leaf cuttings. The least effective option is the method of reproduction through sowing seeds into the ground. In this case, seedlings develop slowly. Rogers is often pollinated among themselves. Therefore, for high-quality seed collection, you will need to plant plants on good distance one from the other. The sowing process is a long and painstaking work. The most important problem with this activity is the low germination of seeds. Hybrids often return to their mother form and gradually degenerate. The first stage of such reproduction is the equipment of a small container with a moist substrate. The box must be kept indoors (T \u003d 0 ° C) for several weeks. Then the mode rises to 15 ° С. When forming the first shoots, it is very important to control the moisture level. After the seedlings reach a height of 15 cm, they are transplanted into a large container. The final move to the bed is done in the fall. Sooner or later, it becomes necessary to divide the bush. The most favorable period for this is autumn. The thing is that the root system is divided into pieces (up to 10 cm). These parts are moved into a special box with a planting depth of 5-7 cm. Soil moistening is mandatory. Storage lasts up to 4 months when temperature conditions from 5 to 10 ° C. As the bush germinates, the plant is transplanted into a pot from a peat mixture. Rogers' favorable neighborhood The formation of plant compositions is a real art. People have been studying this profession for more than one year. Rogersia subtly combines the effect of youth and freshness. In union with other plants, culture forms beautiful combinations in the front garden. Fern, bergenia, bell. All these representatives of the flora look spectacular in flower beds and under the crown. garden trees... Do not constitute an exception for a favorable neighborhood with a tree bush and tall plants (lungwort, periwinkle and mountain goat). For example, the presence of a buzulnik will emphasize the competent location of an exotic perennial and form a long-term and reliable tandem. If you are the owner of a small apiary, then you probably have mint sprouting nearby. Rogers' friendship with this plant is quite reliable. After all, the aroma that these cultures will emit will not leave indifferent inquisitive bees. An experienced beekeeper knows that this scent will pacify pollinators and bring harmony to the work of fanatical workers. In the end, the aesthetic aspect takes on a more colorful direction. Shade-tolerant shrubs are an excellent option for cohabitation with Rogers (astilbe, hosta, forest geranium, purple foxglove, broadleaf bellflower). Coniferous shrubs (yew, rhododendron) are also reliable neighbors. Application in landscape design Large decorative leaves, which have a bright color, make the plant quite exotic and memorable. The inflorescence of 30-40 cm has a racemose shape. This gives the culture a spectacular look and additional entertainment. Rogersia is well suited for flower beds and prefers to sit directly in the shade. The representative of the saxifrage forms magnificent compositions of the tree family, forms the edging of the front garden, the curb and the banks of artificial reservoirs. The ability to grow in dark places is the main feature of the Far Eastern plant. Therefore, an alliance with a fragrant juniper, tall thuja, mysterious spruce and healing magonia will be very strong. When creating a design project, it is required to keep in mind that the grown bush will cover neighboring flowers and crops with mighty leaves. The most striking combination will be the location on the garden bed of narcissistic daffodils and bright taffy flowers. A rich color scheme starts from a reddish-purple hue (burgundy) and ends with a bronze transfusion of leaves. Most designers use Rogers when designing stone gardens. The secret of success in creating a quality combination lies in both good taste and the ability to contemplate all the beauty of nature. After all, even a competent planting on an ordinary lawn can create a fabulously beautiful corner. Photo of Rogers in the creation of landscape design