Telescopic platband dimensions. Platbands on MDF doors - how to choose the best option and fix it correctly. What is telescopic platbands

The choice of door finishes during installation was limited several decades ago. Now you can choose any platband for this interior element. Manufacturers produce a wide range of products, while a strictly defined platband is suitable for a specific task. They have several differences: by material, installation method and purpose. An interesting solution for any interior there will be a telescopic frame.

Types of platbands

Platbands for entrance and interior doors they are distinguished according to the functions they perform: decorative or constructive. The latter have their purpose to close the gap formed between the wall and They are installed directly on the box. Decorative ones create visual aesthetics, creating a harmonious transition between and the wall.

Platbands made of wood

Even with all the variety of materials, wood has not lost its significance. It is environmentally friendly and versatile. Platbands from it will fit any type of box. The pluses of wooden elements include the possibility of further restoration, namely painting, putty, varnishing, etc. More often the telescopic casing is made of wood.

Platbands from MDF

These elements have a beautiful appearance and most often they imitate wood. MDF coating can be different, but mainly it is paper laminated. Such an outer layer is very afraid of moisture, therefore it is undesirable to wash it, since even a slight ingress of moisture, for example, when washing the floor next to the door, can worsen the appearance of the casing.

Platbands made of plastic

Plastic has recently been used as a material for the casing, but has already gained popularity. This was due to its moisture resistance and low cost, as well as a variety of colors and shades.

Platbands made of ceramic

The elements door framing made of ceramics - this is a specific option that is more often used when interior decoration the entire room under a stone. Therefore, they are decorative, and their popularity is low due to their limited use.

Telescopic trim: features

Telescopic platbands got their name from the way they are attached to the door frame. They are curved strips along their entire length. One of the edges is curved at a 90 degree angle to form an L-shaped cross-section. This curved edge will fit into the door groove. Telescopic mount allows you to adjust the width door frame under the width of the wall within 8-15cm.

The standard width of the box is 7 cm, and the walls are often wider by a few centimeters, so special extensions are used that push the telescopic platbands apart.

Telescopic platband: advantages

• Fast and easy installation.
• Telescopic structures allow avoiding the use of additional elements such as extensions.
• Platbands do their job well, hiding the joint between the box and the wall.
• They are easy to dismantle, which allows renovation workwithout fear of damaging the platband. At the end of the work, the telescopic platbands can be simply replaced.
• There are no traces of installation, since the telescopic options do not require fasteners - nails or glue. Sometimes the platbands can be glued, but this must be done carefully: fix the part that is attached to the wall, and not the joint itself with the door groove.

The only drawback of telescopic platbands is their high cost compared to other options.

Telescopic casing, photo of which is presented below, as well as simple platbands, can be flat, rounded or shaped.

Installation features

Sometimes doors are produced with ready-made fittings, including platbands. This eliminates possible errors and shortcomings during installation. The technology allows you not to use special types of fasteners. Installation of telescopic platbands in this case is much easier.

Telescopic doors initially have a groove for mounting platbands. These slots allow installation even on walls that are not vertically aligned. This is achieved because the molding fits snugly against the surface. The telescopic panel can be an addition to the casing, it is attached to it with a special veneer and allows you to give an aesthetic appearance to an opening of any thickness.

The design of telescopic platbands does not allow them to move in relation to the door, therefore, a single geometry is preserved. Installation of such platbands does not require additional measurements and tools.

Craftsmen often ask themselves: how to install telescopic platbands? Even an inexperienced person will easily cope with the installation if he has an idea of \u200b\u200bthe design of the door frame and the functions of the platbands. The type will not play a big role in this.

When installing telescopic platbands, special attention should be paid to the place where the fasteners door hinges cross the grooves. In this case, the protrusion of the casing must be cut to the required depth with any available tool.

Before installing any platbands, make sure that the walls are aligned. Otherwise, a gap will form between the platbands and the wall, and this will inevitably ruin the appearance.

Telescopic platband, the dimensions of which depend on which opening should be refined, they are produced with a width of 6-8 cm.The length of the two parts is 220 cm, and the size of the top is 120 cm.The shelf that is inserted into the groove can have a width of 1 to 4 cm.

Conclusion

Installation of platbands on the opening is an important matter, which requires maximum accuracy of measurements and accuracy during the installation process. Observing these conditions, you can achieve quality result, which will guarantee the uniqueness and completeness of the interior. If you are installing a box containing all the necessary elements in its kit, then you need to carefully read the instructions provided by the manufacturer - this will exclude incorrect installation or damage to decorative elements.

The external attractiveness and functional accessory of the installed blocking block of the opening is significantly enhanced if you use telescopic door trims. It is the quality of installation that determines the level of optimal comfort in the room. And how to choose them correctly, the installation process and some of the nuances, everything is laid out below in the article.

Selection criteria for platbands

Platbands on the doors have a number of important functions that enhance the quality use of interior or entrance doors.

Platbands add aesthetics and comfort to the room

That is why the installation of platbands is actually the most important final stage of ennobling the doorway. And it's no secret that the quality of the work done finishing works able to guarantee an attractive result. Therefore, it is worthwhile to be imbued with some of the recommendations presented below, thanks to which the cashing on the door will sit down in time, and the installation of extras will become another exciting entertainment.

If, thanks to the recommendations, the difficulties in the selection of door ceilings for internal purposes went off with a bang, then the installation of interior doors could slightly fray your nerves, as home master, and households. Nevertheless, the installation of platbands, especially telescopic ones, does not seem to be a difficult task that could not be done by hand.

Telescopic molding design and docking example

To carry out the process of installing telescopic molded products, first you should buy door trims. The design of the opening of adjacent rooms should correspond to the design not only door structure, but also the interior decoration itself. Of course, door trims are selected in relation to individual preferences of interior design, but we recommend taking a closer look at some tips that can facilitate the selection process, which are presented below.

General dimensions of decorative strips

Harmonious decor for quality installation

The first and main task of cashing out is to create an attractive decoration doorway. The decor in any kind of use should not stand out from the general visual dimensions of the room. In other words, platbands, like add-ons, should look natural on the plane of the wall relative to the dimensions of the door leaf, the opening itself and the adjacent baseboards.

Agree, because the door will look a little ridiculous small size in the opening, which is often installed in openings leading to the kitchen, bathroom or shower, framed by a wide convex profile of the casing.

In addition, there are GOST standards that regulate correct selection width of the door casing. It is often not easy to select the required width parameters, given that the platbands are standard in height and can be structurally type-setting.

Typesetting of telescopic molded products

They will have a completely organic look door trims in an average width of 7 to 10 cm. This size of cashing on the door will focus on the very door structure of the passage block.

Organic use of wide cash

We agree that in some design solutions when decorating interior furnishings, wide platbands on the door look pretty good and even appropriate.

Previously, the installation of platbands for an interior door required certain measurements, patience and accuracy, but even this did not guarantee the correct and even installation of these decorative elements, they did not know about extras in those days. However, modern solutions and competition in the market have a positive effect on the development of production, due to which from time to time some innovations appear on the market that qualitatively improve the doors and the process of their installation in the doorway. Everyone knows what interior doors are, however, not everyone understands what interior doors and telescopic trims are. In this article, we will dwell on each concept in more detail.

Telescopic platbands for interior doors
In the design of any room, everything should be perfect, especially the interior door. It is she who meets and sees off the guests, it is the doors that are the first piece of interior that the person entering the room sees, which means that the interior of the room will be primarily associated with the front door. Platbands are far from the last element of interior door decor.

A platband is a decorative functional element that hides the connection between the door frame and the walls of the room. Also, they decorate the doorway by framing it around the entire perimeter, except for the threshold or floor. Depending on the installation method, two types of platbands are distinguished:

1. Traditional overhead platbands
2. Telescopic platbands

Overhead platbands are mounted using fasteners and glue. They are simply superimposed on the door frame-to-wall intersection and fastened. Their main disadvantage is the complexity of installation. Considering the fact that platbands are simply applied, they can move in different directions relative to the door, thereby violating the geometry and appearance of the doorway.

Telescopic platbands have a special design that does not allow them to move relative to the door, thereby maintaining the ideal geometry of the doorway, moreover, their installation is much easier and does not require the use of additional tools and measurements. The design of the telescopic platbands is ingeniously simple - there is a fastening protrusion on the platband, which is at an angle of 90 degrees to it. It is this protrusion that is inserted into a groove specially made at the factory in the door frame, due to which the platband perfectly follows the door contour and is installed without any problems.

When installing telescopic platbands, pay special attention to the fact that the fasteners of the door hinges will cross the grooves. At these points, the retaining tab on the casing is removed to the required depth using a milling cutter or similar cutting tool.

Advantages of interior doors with telescopic frames:

• Platbands are quick and easy to install
• In some cases, platbands are excellent solution, allowing you to avoid the installation of extensions
• Platbands hide all inconsistencies between the wall and the door frame
• This design makes the platbands easily removable. For example, they can be removed during repairs in order to properly and efficiently glue the wallpaper or carry out painting work.
• Telescopic platbands do not require fasteners or glue, as a result, there are absolutely no traces of fixing platbands to the doorway

Interior door fittings
Sometimes the installation of an interior door is complicated by the fact that the wall is wider than the door frame, and after installing the door, the inside of the opening remains uncovered. To close up this part, many use plastic or cover the opening with plaster. However, there is a more acceptable, simple and aesthetically pleasing beautiful way to close up the inner opening, which remained uncovered by the door frame - to install door accessories.

Door accessory is a wooden panel that is a continuation of the door frame and connects it to the casing, thereby hiding the remaining surface of the doorway. The add-on itself is, in fact, an extension of the door frame to the platband. If the door frame is equipped with telescopic platbands, then the addition must be appropriate - with a special groove for installing the telescopic platband.

Advantages of installing door fittings:

• This doorway finish favorably emphasizes the doors as separate element interior and as practical as plastic or plastered slopes
• If damaged, they can be easily replaced without the need for extensive repair work.
• They are more resistant to mechanical damage than plaster

Complements are often sold complete with a door structure. If they are not included in the kit - do not worry! There are a great many different accessories on the market, among which you can find the necessary ones. When choosing a complement, you need to pay attention to their color, texture and shade of color. Dobras should be in one colors, which will create the impression of a single door structure. When choosing an extension, be sure to take into account the type of platband, if you have telescopic platbands, the extension must be equipped with a special groove for the installation of this structural element.

Platbands are a decorative element that frames a doorway and also closes the gap between the frame and the wall, which is often the case: walls in an apartment are rarely perfectly flat. Such a part can be sold separately, or it can be a set with accessories and a box.

In the very simple version the casing is a straight strip 7 mm wide and 8-10 mm thick. It is fixed around the opening and can have different shape - flat, teardrop, round or curly. However, this option is only suitable for the simplest cases.

If the dimensions of the doorway, respectively, the sash are standard at least relatively, then the parameters of the slope are not affected. Of course, in modern buildings the width interior partitions and load-bearing walls more or less standardized. However, there are options here as well. Firstly, the thickness of the walls in different buildings, and, most importantly, in houses for different purposes, varies within very wide limits. Secondly, when moving openings, builders also come across unusual engineering solutions.

As a result, the door can fully fit in size, which cannot be said about the box. The maximum that the frame can cover is up to 140 mm thick. If the width of the slope is greater, telescopic platbands and extensions should be installed.

What it is?

Conventional cross-sectional models always have a simple configuration. The shape of the top may vary, but the bar itself remains straight. During installation, the part is joined to the uprights of a conventional box and thus bridges the gap between the product and the wall. The only difficulty in this case is to choose a model by color: bleached oak, wenge, walnut.

The telescopic casing for interior doors has an L-shape. Along its entire length, the part is bent at an angle of 90 degrees, which allows it to be installed in the groove. The second feature is the presence of this groove. In his absence, such an attachment would be impossible.

The L-shape allows you to adjust the total thickness of the door frame to the width of the opening in the range from 10 to 15 mm. Part sizes vary from 90 to 150 mm.

With wide slopes, this is not enough, therefore telescopic platbands are combined with the same additional strips. The latter also have a corresponding groove, but the shape remains straight. In fact, this is an additional insert that allows you to expand the frame and cover the entire slope. The photo shows a prefabricated frame for an interior door.

Manufacturing material

A telescopic box with a casing must be made of the same material. It is important to choose not only the appropriate color - wenge, bleached oak, cherry, but also the material, since different woods and chipboards have different coefficients of thermal expansion and react differently to changes in humidity.

Accordingly, if these values \u200b\u200bdo not match, the box will begin to deform.

• Sheet pile or edged board - if the frame is made of wood, the same material is used for the additions. Moreover, you should choose the same breed.
• MDF - wood-based material high density and strength. Its big plus is good strength and high resistance to moisture and cold. This option is great for front door... The photo shows a telescopic sash system.
• Waterproof plywood is the choice for a model made from MDF, chipboard, or a combination of these materials. Plywood perfectly holds its shape and is resistant to moisture, so it is suitable for decorating an opening to a bathroom or a toilet.
• Aluminum is a rather rare case intended for the design of metal doors with glass and plastic inserts.

Installation is carried out in the same way for both the entrance and interior modules. However, the work is not as simple as it seems, since you need to assemble a U-shaped structure of the required thickness from the box and all kinds of slats.

Platbands alone cannot solve the problem. With a large thickness, it is also necessary to install inlaid strips, which are selected according to the total thickness of the slope and adjusted in size, if required. If the sash is already installed, add-on elements are purchased. Installation is somewhat more complicated, in addition, the fastening is not so reliable, but it fully justifies when installing interior doors.

The U-shaped structure of all parts is assembled in 3 different ways:

• the top bar is installed between the vertical elements;
• installation supported by transverse struts;
• installation with a cut at 45 degrees. This is the most difficult method and when self installation better not to use it.

The general scheme of work is as follows:

1. Preparation is everything finishing work must be completed: the slopes are leveled, plastered, the walls are painted or covered with wallpaper. It is desirable that a finishing floor be laid, otherwise it will be necessary to very carefully adjust the gaps between the elements.
2. The slats are cut in width and length. The amount of trim is determined by the width of the slope. It is easier to wash it down at 90 degrees. To cut at 45 degrees, a saw with the option of turning the saw blade is required.
3. Install - temporarily, vertical racks, they measure horizontal parts. They also do the same with additional elements: they are temporarily fixed in the grooves of the frame and the telescopic extensions and platbands will be adjusted in size, if required.
4. First, a horizontal jumper is assembled. Products fit very tightly into the groove. If this is not the case, it is recommended to lubricate the grooves " liquid nails"Or other adhesive.
5. The same is done with vertical elements.
6. If necessary, the parts are attached to the wall with finishing nails without hats.

The video shows how to install a telescopic system.

Estet doors are produced in Novocheboksarsk, where they undergo a full processing cycle according to the technology. This is confirmed by numerous certificates and documents of compliance with standards.

The choice of interior systems Estet for an apartment

Beautiful and quality doors in the apartment - a bar, which any good housewife seeks to take, especially when it comes to interroom. They not only protect the premises from dust, sunlight, noise and drafts, but also serve to delimit space, while simultaneously being a continuation of the interior of the room or an accent in the room. Estet doors of Novocheboksary manufacturer fully meet these requirements.

The Estelle company, having entered the market in 2002, launched production activities in 2007, began to produce high-quality wood products and soon became one of the leaders in this area. She currently produces about 200 thousand door leaves with components, has a network of branded showrooms in 15 cities of Russia, actively works with domestic and foreign partners.
From raw materials to high-quality products, doors go through many technological stages, each of which is subject to strict control. Due to strict adherence to production technology and tracking of defects, the buyer receives a finished product, for the quality of which the manufacturer is responsible for its good name.

Features of production

The material for the manufacture of the frame and door frame is coniferous wood. It is sawn into fragments, carefully processed, removing natural pockets with resin, knots and damage. The dried beams glued together along the length lose the tension of the solid wood, therefore they hardly react to sudden changes in temperature and humidity in the room. Due to this property, the product does not deform.
The frame is covered with a layer of PVC, which is currently comparable in strength to veneer, but significantly surpasses it in a number of other characteristics, which will be discussed below. Thanks to the PVC coating, interior doors are additionally protected from moisture, do not react to high air humidity and can be used for installation even in bathrooms, lavatories and kitchens.
Doors acquire increased impact resistance, resistance to mechanical damage, scratches and chips, as evidenced by customer reviews. The cost of PVC-coated products is much lower than veneered ones, but higher than laminated ones, covered with paper. Being in the middle price category, they have a huge durability resource and, depending on the load, frequency of use, quality of care, external mechanical and chemical influences, they can last for more than a dozen years, for which manufacturers have received more than once best reviews buyers.
Polymer layer prevents harmful effects on wood texture and dyes sun rays... During the entire service life, the products remain the same color that was obtained in the production process, do not fade in the sun.
Each type of drawing of the door and its frame has a digital code, therefore, if necessary, it can be reproduced required amount times without limitation. This is important for those who wish to achieve complete harmony of all interior details during the renovation process without difficulties in selecting similar patterns, or who want to buy interior doors as funds become available.
A large number of colors and shades in which the interior doors are made allows you to make optimal choice and, using the product catalog, find by photo suitable model for any interior.
The PVC coating is practically non-flammable, has high strength in combination with elasticity, heat-insulating properties, does not emit pollutants, toxic substances into the air.

Decorating fireplaces with artificial stone

Model lines

Estet's quality interior doors receive only the most positive customer reviews. It cannot be otherwise, because they have not only excellent performance characteristics and acceptable cost, but also an excellent appearance, which can be seen in the photo. The safety of the goods that contains the catalog is evidenced by certificates confirming their compliance with the requirements state standard to wooden doors, as well as sanitary rules and regulations, which is also confirmed by a photo of documents.
The table shows some models of the Estet collection of interior doors: Prestige, Sirius, Modern, Classic, Style, Baroque, Line.
You can familiarize yourself with them in more detail by examining the product catalog with a photo.

Estet doors look very harmonious in the interior. Scrolling through the catalog, pay attention to the name of the collection - it will suggest the direction of the search. Colorful photos will present each model individually, and customer reviews will complement the impression.