Framing the doorway: possible options. Framing the doorway Decorative opening

To increase the space, as well as simply for aesthetic purposes, door blocks are removed on the interior partitions. During the redevelopment of an apartment, most often they equip a free passage between the hallway and the hall. No less popular is an opening without a door that unites the kitchen with the living room. Expansion of space occurs due to getting rid of the dead zone allocated for opening the sash. However, redevelopment creates a new problem related to the design of a doorway without a door, which is sometimes difficult for the owner to solve.

In a house, not every opening can be left without a door. An open passage to a bathroom or pantry will look ridiculous. A secluded area is the kitchen, bedroom and study, but there is an exception to the rule for these rooms. For the organization of intimacy, the decoration of the openings is carried out with curtains, sliding screens and other similar devices. As a result, the visual illusion of the separation of rooms is created, while the space remains without a dead zone.

Open passageways emphasize the integrity of the living space. All openings make the same shape and decorated with a material similar in structure to create a single ensemble.

They get rid of the door leaf when decorating the opening between the kitchen and the living room or when one of these rooms is connected to the hallway. However, it is desirable to provide for visual separation at least with curtains.

If a gas stove is installed in the kitchen, for safety reasons, the room will have to be fenced off at least with a sliding system.

Free passage is arranged when combining a hall or kitchen with a balcony. The process involves the simultaneous removal of the door and window frames. If an office or a small bedroom is equipped on the balcony, the rooms are separated by curtains or a screen.

When it comes to fencing off the kitchen with gas stove, often the passage is made out with shelves. Curly flowers, figurines and other elements are placed on decorative shelves.

Getting rid of the door not only expands the space. Air circulates freely through the open passages. Even in a small apartment it becomes fresher in summer.

When making an opening, doors are not required in the following cases:

• The modern solution for redevelopment is an interior portal, which allows you to keep the rectangular shape of the opening. Without a door, the passage becomes freer, and the decoration from massive decor elements gives aesthetics.

• Arched aisles are popular. In an apartment with high ceilings, they prefer the classics, equipping the opening with a semicircular configuration. For a building with low ceilings, it is advisable to visually raise the walls with an elliptical arch.

• The door block is rejected by the owners who like the aisles of the wrong configuration. When decorating, asymmetric arches, triangles, trapezoids are in demand. A rectangular portal looks beautiful, the corners of which are rounded at different radii. The only drawback is the limitation of the passage size. It will not work to make the opening if its width is less than 80 cm.

Doors are rejected when decorating a passage with a bar counter, stained glass elements, mosaic fragments. Often such techniques are appropriate for studio apartments.

Advantages and disadvantages

If you compare a beautifully designed open doorway with a door block, you will be able to identify a number of advantages:

• The integrity of the space of the combined rooms is created. The apartment becomes free, bright, while maintaining the functionality of each zone. The kitchen remains the kitchen, the living room remains the living room.
• When framing the doorway, materials that do not require complex maintenance are used. The absence of a sash eliminates the loosening of the box, the formation of a dead zone.
• Without a door leaf, the opening can be given an original configuration that allows you to emphasize the style of the interior of the entire room.
• Decorating an interior portal with even the most expensive materials will be more cost effective than installing a high-quality door block.

The disadvantage of an open passage is that it cannot be used for and storage. With any type of design, a passage without a door is not able to provide the intimacy of a specific area.

Free ventilation through open openings will bring great inconvenience when combining a kitchen with living rooms. Smells during cooking, along with fat vapor, will spread throughout the apartment.

Forms

It is possible to complete the design of the opening while maintaining the original configuration or modify the passage. Often the shape of the structure depends on the materials used for finishing. The skill of the master plays an important role.

Of all types of doorways, the simplest option is the classic rectangular shape. An inexperienced person can assemble such a structure. To decorate the opening, the entire door block is removed along with the frame. The ends of the walls along the contour are trimmed decorative cladding... If it is difficult to dismantle the sash, only one sash can be removed. Sheathe the remaining frame elements with MDF or plastic. The disadvantage of this method is the narrowing of the doorway due to the remaining elements of the box.

In the case of arched design of openings choice of shapes huge:

• Considered a classic semicircular arch. The transition is suitable for combining any rooms. If the apartment has low ceilings, it is better to abandon the semicircular arch or widen the passage.

• Arches trapezoidal forms are easier to manufacture, suitable for apartments with low ceilings, are often installed when combining a kitchen with a living room. However, designers rarely use the trapezoid due to the association with the form of ritual accessories.

• Fans of unusual configurations prefer triangular arches. The design has many subspecies, more suitable for spacious rooms with high ceilings.

Modern apartments are increasingly equipped with doorways asymmetric forms. The structure is easier to make from drywall. For registration use lED backlight, equip niches, shelves and other decorative elements. Asymmetric structures allow you to hide large defects in the passage and the interior partition itself.

How to refine a doorway?

When decorating an opening without a door, almost any material used for wall decoration is suitable. A budget option is a plasterboard construction followed by painting or wallpapering. It is optimal to choose a gypsum board in the manufacture of an asymmetric device. Plastic or MDF will be cheap.

Of the more expensive materials for decorating the doorway, artificial stone, tiles, and valuable wood species are used. The pinnacle of art is stucco decoration.

When choosing the option of finishing a doorway without a door, one must take into account the style of the entire room. The design should harmoniously fit the passage into the interior, and not highlight it with a separate structure.

The portal in the apartment is equipped with two types: full - with a top and side elements, two-sided - only side edges without a top. Similarly, they provide for the installation of a threshold and platbands or refuse these elements.

Installation of slopes and drywall arches

If you decide to arrange a doorway without a door with your own hands in the form of an arch, it is better to use drywall for decoration. The sheets are inexpensive, easy to cut and assemble. When making an arch, a frame is assembled from a galvanized profile. Structures give the shape of the future opening. The frame is sheathed with fragments cut from sheets of gypsum board. Fixation takes place with self-tapping screws. The finished arch is treated with a primer, a perforated corner is glued, putty, and after drying, it is polished.

If there is no desire to build an arch, the slopes are simply lined with plasterboard. To further refine the doorway, use water-based paint or wallpaper.

How to finish a doorway with a stone?

Decorating the portal with decorative stone looks stylish. The material is made from natural chips with the addition of coloring pigments and polymers. When framing the opening, they rarely adhere to even boundaries. Most often, ragged edges are preferred. To aesthetically decorate the doorway inside the room, a stone with a small, almost smooth embossed pattern is used. Elements with a deep texture create a cumbersome design. They are used to decorate entrance door openings from the street side.

The decorative stone is well cut, but for corners it is better to use ready-made corner elements. Installation is carried out with tile adhesive or liquid nails.

Finishing with addons and platbands

Simply and tastefully it will be possible to finish the rectangular doorway and, made in the form of slats. Elements are made of wood, MDF or plastic. The latter look less aesthetically pleasing.

From MDF there are ordinary, with an edge at the end and telescopic. In the first version, the edge of the plank is without decorative coating. You need to fit the joints tightly. Complements with edge have a finished look. The end is glued decorative film and in the case of flaws, the joints look presentable.

They are produced in flat, rounded and other shapes. Wooden planks can be decorated with carvings. The elements are mounted on glue, nails or self-tapping screws. Telescopic platbands fixed with a lock to a pre-fixed bar.

Interior decoration MDF

With MDF panels, a beautiful and inexpensive portal finish will turn out, only platbands are still selected from a similar material. The disadvantage of cladding is the fear of dampness. It is better not to use MDF to decorate the passage connecting the kitchen to the living area. If over the oven is organized good system hoods, then the material does not threaten dampness.

To sheathe the MDF doorway, first a frame is constructed from wooden slats. The panels are cut to size and fixed with special metal clips. The strips are joined together with a thorn-groove locking connection.

MDF panels without locks are planted on adhesive solutions. The frame is not constructed. For gluing the strips, a perfectly flat surface is prepared. The joints are closed with a decorative strip, and the edges of the passage are framed with platbands.

Decorating a doorway with plastic

The principle of ennobling the opening with plastic resembles finishing with MDF panels. Only the material is different. Plastic PVC panels are fixed to the frame with fastening clips or glued. The framing is completed by a casing made of a similar material, which is attached to the guide strip.

PVC panels trim doorway rectangular, semicircular and other configuration. Stores sell ready-made kits for facing arches, you just need to choose the product according to the size of the aisle.

The advantages of polyurethane stucco molding

Plaster molding is rarely used because of its fragility and high weight. If the apartment has high ceilings, and a Venetian or other similar style is chosen for decoration, then the decor of the doorways is carried out with polyurethane elements. The material is not fragile, lightweight, amenable to coloring.

For the installation of such a stucco, a flat, solid surface is prepared. Pre-treatment is carried out with a deep penetration primer. The elements are fixed with an adhesive mixture. After the glue hardens, the joints are putty and then sanded with sandpaper.

Wood trim

Lovers of natural materials prefer a portal made of wood, lined with extrusions and platbands. When making a door portal with your own hands, you can even use cheap pine wood. After good sanding, processing protective impregnations and varnishing the material will be difficult to distinguish from valuable wood species. You can decorate the wooden portal of the doorway with carved ornaments.

The elements are being installed on the frame. First, flat strips are attached to the slopes, then platbands are installed. The doorway lining is fixed with self-tapping screws. The hats are sunk in drilled countersunk holes, and rubbed over with putty on top. I glue the platbands, fix them with nails or self-tapping screws.

Curtain decoration

Simple option to arrange doorways without a door - will hang curtains. The whole process consists in fixing the cornice over the aisle. Curtains will hide an opening without a door from the field of view, distract attention, and will not clutter up the space. The main requirement is not to use curtains with horizontal opening. They will become an obstacle in the free passage. It is optimal to use curtains for doorways with vertical closure. When open, the curtains are tied to the wall.

If you make every effort, decorating a free interior passage will turn out better than a door block. Subject to the use of expensive materials, it is advisable to use the advice of experts so that the costs are not in vain.

When starting to renovate their own apartment, the owners are trying to use all possible design techniques to increase the space of small rooms. To this end, many refuse to install interior doors, thus uniting several rooms together. This solution allows you to expand the boundaries of the room and make it more spacious. But how to decorate a doorway without a door so that it becomes a real interior decoration, we will consider in our article.

Opening design options

So, if you decide to refresh your interior with an opening, then first we recommend that you decide on its future shape. It can remain rectangular, acquire the shape of an arch, or acquire additional corners. In any case, the design of the interior passageway should fit well into the interior of both rooms. That is why you should not immediately go to the store for finishing materials, which will eventually become completely useless.

In order to successfully arrange a doorway without a door with your own hands, first of all, you should sketch a sketch of the future design. Consider the most popular ways to design aisles between adjacent rooms.

Portal openings

This is the most popular and simplest design that can be done with my own hands... In this case, the entrance retains its rectangular shape, but is complemented by a more massive finish with various decorative elements.

Usually, to arrange such an opening, it is necessary to remove, dismantle the box and remove all structural elements of the former door. The resulting passage is leveled and finished with the selected materials. Rectangular openings are suitable for both small and large rooms, while their design style is most often strict and restrained.

Passages in the form of arches

Doorways-arches most often have a classic shape. In this design, the arch is made in the form of a semicircle, the radius of which is equal to half the width of the passage itself. Oval openings are quite popular and easy to design. However, before choosing this option, pay attention to the height of the ceilings in your apartment. In rooms where the height of the walls does not exceed two meters, it is categorically not recommended to design a rounded opening, as it will visually lower the ceiling even more.

Here it is better to give preference to an elliptical arch. This option is optimal for rooms with low ceilings, since the special shape of the vault allows you to visually increase the height of the walls.

Irregular shaped openings

If simple forms do not satisfy the needs of the owners, you can experiment and create more difficult option... Since there are no strict rules in modern interior design, the shape of the passage can be the most unusual and even slightly bizarre.

Often in the form of a trapezoid, triangle, semicircle and various asymmetric configurations, with oblique slopes to one side. A combination of several shapes is also possible. For example, when a rectangular portal is complemented by rounded corners of various radii. This design is used only in cases where the width of the doorway is more than 80 cm.

Often in modern design projects you can see unusual openings equipped with spotlights, side shelves or bar counters. This approach not only decorates the room, but also makes the passage between rooms a functional element of the interior.

Special attention should be paid to structures decorated with colored glass, stained glass or mosaic fragments. It is very difficult to complete such a design on your own, therefore, in most cases, this work is entrusted to professionals. It should be noted that complex and curly arches can be installed only in cases where the width of the doorway is greater than the standard one. Most often, this design is used in studio apartments. In small and low rooms, it is better to give preference to a strict classic style.

After you have clearly decided what shape your passage will be, you can start decorating it and choosing decorating elements. Let's start by choosing the material.

Design options

When thinking about how to arrange a doorway without a door, study all possible options finishes and choose the one that best suits your décor.

Today, the following materials are actively used for these purposes:

Decorative rock;

Polyurethane;

Decorative plaster;

Plastic;

What each material is and how you can use it to design a doorway, we will consider in more detail.

Wood

The most noble and spectacular is the finish with the participation of natural wood. The most valuable wood species such as ash, oak, mahogany and hornbeam can be used here.

These types are distinguished by presentability and durability, but they are too difficult to process and have a high price tag. That is why pine products are most popular today. It has an acceptable cost, is quite durable, has a beautiful structure and, most importantly, can be easily processed with hand tools.

Such arches are sold in the form of finished products, which can only be installed in the right place.

As an alternative to natural wood, MDF panels can be used. They are lightweight, affordable price and a wide range of colors.

Plastic panels

Plastic finishing is an economical option for decorating openings. The material is quite easy to work with, since it does not require preliminary preparation of the base and is attached to ordinary liquid nails.

Despite their simplicity, plastic panels look very presentable. They emphasize the severity of the interior and create a contrast in the opening area against the background of the adjacent walls. This design is also convenient because the plastic is resistant to moisture, which means it can be used near the kitchen. Anyone can decorate with plastic, since even if any mistakes are made, the damaged element can be easily replaced.

Polyurethane

If you are wondering how to beautifully decorate a doorway without a door, pay attention to polyurethane decor. This is a fairly dense, but at the same time flexible material, which is used to create an imitation of heavy and expensive plaster moldings. This design looks very attractive, while being much cheaper than tiles and decorative stone.

Polyurethane stucco molding is attached with special glue to a wide variety of surfaces. The light weight of the material allows it to be used even on plasterboard structures. Initially, decorative elements are white, but later can be painted in any shade.

With the help of this material, the doorway can be decorated with rounded or square columns expanding upward. If the premises small size or massive elements simply do not fit into its design, you can decorate the walls with more elegant moldings made of the same material.

Fake diamond

Decorative stone is distinguished by its ability to bring sophistication into the interior and emphasize the high wealth and good taste of the owner. Today on the construction market you can find a lot of varieties of this finishing material, differing in color and texture. Of course, such a finish cannot be called economical, but these costs are justified, because the artificial stone in the interior always looks luxurious.

Decorating a doorway with decorative stone will require a lot of effort, but the result is always impressive. In most cases, not only the passage is lined with it, but also part of the walls adjacent to it. Both symmetrical and asymmetrical design... If the doorways are located close to each other, they can be decorated in the same style. The smoothly passing cladding from one opening to another looks spectacular.

If you decide to use artificial stone in the interior of your apartment, pay attention to the weight of the material you choose. Some types can heavily weight the doorway, which makes it impossible to use them on drywall structures. In this case, it is better to give preference to plaster options.

How to finish stone decoration yourself?

1. First you need to prepare the walls. If there are large irregularities on the surface of the base, they are eliminated with a putty.

2. Then proceed to kneading the glue. If light options were chosen for facing the opening, they are attached to ordinary liquid nails. Heavier varieties, such as clinker tiles, are fixed on a mortar of cement, glue, lime and sand.

3. The facing of the opening starts from the lowest section of the wall. The product is level, spread with glue and pressed firmly against the wall. If you do not want to additionally seal the stone joints in the corner parts of the opening, the material must be overlapped. The brick of the first row is placed close to the opening, and the element of the next row is shifted inward, at a distance equal to the thickness of the finishing material. Thus, alternating rows, they perform the design of the opening.

Curtains

If in the near future your plans do not include apartment renovation, but you really want to bring fresh notes to the interior, be smart - hang curtains on the doorway. This move will allow you to simultaneously decorate and, if necessary, hide the passage between the rooms.

Fabric curtains look good on openings of absolutely any geometry. The main thing is to pay special attention to the choice of colors and textures so that they harmoniously fit into the interior of the room. Otherwise, there are no restrictions. can be heavy with lambrequins, drapery, or restrained and light.

If the interior of the apartment is decorated in oriental style, here will come in handy Products from natural wood with a variety of sticks and beads will be an excellent decoration of the doorway. This option is also attractive in that it does not accumulate dust in itself and does not impede air circulation between rooms.

When choosing curtains for the doorway, pay attention to the thread options. They are presented on the market in the form of fabric cords, which are complemented by various pieces of glass, shells and stones. Textiles can cover the entire passage or be used to frame it.

This design method is attractive because it can be easily done with your own hands, and the affordable cost and variety of options allow you to change the design of the interior opening at least every year.

Decorative plaster

Another easy way to decorate a doorway without a door is finishing decorative plaster... It is suitable for those owners who want to do the work with their own hands, since this process does not cause any particular difficulties even for inexperienced craftsmen. This design it is considered quite durable and unpretentious to care for. The dried surface can be easily painted in desired color, thanks to which the opening will successfully fit into any interior.

Before applying the solution, the base is leveled and the caps of the fasteners are masked. Next, the opening is treated with a primer, after which they begin to apply the decorating composition. Using special rollers and stamps, the solution is given the desired relief. After the plaster dries, it is painted with coloring compounds or covered with finishing solutions.

Conclusion

As you can see, there are many ideas on how to design a doorway without a door. When choosing a suitable style, you can turn to specialists for help, or you can create your own and unique design project. The main thing is that all the materials used in the interior are harmoniously combined with each other. Only in this case will you be able to create an original and attractive doorway design style. We hope that the information you read was useful to you, and the photos posted in this article helped you with the choice the best option registration of the passage between rooms.

Every owner of an apartment or country cottage dreams of being cozy, comfortable and beautiful inside. Now there is everything and even more to create original interior solutions - modern construction Materials, newest technologies, a huge number of design ideas. However, in addition to finishing the ceiling, walls and floor, doorways also play an important role - they visually divide the rooms among themselves and are an important part of the interior. Framing will help complement the interior design and create unique and interesting effects. There are various technologies and materials for this - consider the most popular and unusual solutions.

Selection of the shape of the opening

The doorway is considered a very important detail in a modern interior. Its task is not just to divide the room into several zones. A properly designed opening also performs an aesthetic function. Its forms can be very different, and the choice of material for decoration already depends on them.

Generally speaking, there are openings with or without a door. Open arches are also distinguished. In the case of doors, part decorative finishing should go directly to them. In the case of an arch, designers recommend drawing attention to it as much as possible. There are also other forms of openings - these are standard rectangular, ovals, rounded rectangles.

About the choice of materials

How to choose the right frame and materials for the doorway? Here are some examples. Stucco molding can be used for any shape, but MDF panels are no longer so versatile, and they are best used with classic rectangular openings.

With the help of stone - both natural and artificial. Also, designers recommend taking a closer look at textile materials. With their help, you can evenly and very beautifully cover the entire opening. It is recommended to select cladding materials not only based on forms - it is necessary to take into account other interior elements as well. The opening dividing the rooms can be processed on the one hand using a specific technology and material, and on the other, completely different solutions can be used. In the case of narrow openings, they are sometimes widened. If such a decision is made, all the nuances must be taken into account.

For large, wide aisles, an oval shape with smooth lines is relevant. Framing doorways of such a plan can be made very interesting using unusual materials in the decoration.

Finishing methods

It will not be difficult to do everything beautifully - the modern construction market offers a lot of finishing materials. Construction technologies make it possible to apply original and interesting solutions... They decorate the passage with curtains in a very unusual way. It is a very cheap solution that can look beautiful and stylish, and yet be practical. The curtain can be removed, erased and changed at any time. Another budget option is the wallpaper that was used on the walls of the rooms. This is also a good solution. It doesn't matter what type modern wallpaper selected - such a framing of the doorway will be very beautiful.

Stucco

Often found in apartments and houses, passages between rooms, reminiscent of openings in Venetian palaces. This is stucco molding. The ancestors of modern mankind used such technologies for decorating passages, however, this method is still very popular today. Previously, gypsum was used for this, but today no one uses this material anymore. Its place was taken by polyurethane.

Framing doorways made of polyurethane comes down to buying ready-made elements in a building supermarket and gluing them to the wall of the opening - various elements are offered for every taste and in any style that allow you to create absolutely any patterns. But with polyurethane stucco, neatness is needed - it is not for every room. If there is a doorway, the framing of which will be made using this technology, then all other solutions in the interior should be in the same style. Otherwise, decorative patterns will stand out from the whole picture.

For small rooms, designers recommend using elements with a shallow relief - details with large molding will make the opening visually heavier. Polyurethane elements are produced in a standard white color, but you can repaint them as you like in the color of walls or ceilings. To create an exclusive design, sometimes you have to order a set of parts - you need to take this into account. For the installation of these products, glue or alabaster is used. It is recommended to pay special attention to the joints. They are rubbed with alabaster.

Stone decoration

Framing the doorway with a stone is very popular, although this is a rather expensive solution that requires experience and certain skills. Such a finish will give the opening not only a beautiful appearance. The stone will extend the life of the wall.

Designers advise to make the upper masonry a little wider to give more naturalness when decorating rectangular openings with stone. To highlight the type, the masonry must be performed in compliance with the curvature. Passages without doors are trimmed on both sides.

With a minimum amount of stones, the decoration can be combined with other interior elements. Framing doorways with decorative stone is great for large rooms, rooms with a small amount of furniture. Also, this method is used when it is necessary to remove defects on the walls. You can use two types of stones - natural and artificial. Natural stone is all natural rocks. Artificial - made from natural materials. Visually, it is no different from natural. Among the advantages of artificial stone, the neutrality of this material is distinguished - it does not affect the microclimate in any way. You can also highlight the low weight of artificial products, incombustibility, resistance to moisture, resistance to damage.

Basic rules for stone finishing

Decorative framing of a doorway using this material is performed according to certain rules. Only in this way will the result be of high quality. The opening must be finished as evenly as possible - this applies to the entire surface of the wall.

Places near the opening and in the lower part can be highlighted using more massive stones. The tip itself should not be weighted. The laying of the stone is performed, the curvature of the edges of the opening is taken into account. Strictly follow the tile seams, the elements are arranged symmetrically. Only then will such a frame of the doorway look as natural as possible.

Styling process

Everything is relatively simple here. at first a natural stone you need to choose the size or purchase ready-made stone tiles. If necessary, the dimensions can be adjusted using a grinder. Then a special mesh is attached to the wall, on which glue is applied. Next, stones are laid. At the end of the work, the seams must be leveled and cleaned. The full drying time of the glue is about 48 hours.

Corner finishing - budget solution

Framing the doorway with a corner is used when it is necessary to protect the corners after wallpapering or plastering, as well as just for finishing. Of course, this will not look particularly original, but it is an inexpensive and practical solution.

There are several types of corner. They are sorted by profile - it can be L or F shaped, and T-shaped is also used. A corner with an unequal section is also used, which is intended for doorways. The dimensions of this element are 5x17 mm, 10x20 mm, 15x25 mm. These corners are much easier to fix and have sufficient flexibility. These elements are attached to special glue.

As you can see, there are many ways to decorate doorways. This variety allows you to create original solutions and implement the most daring design ideas for beauty and comfort in the house.

Door constructions take up extra space and are not cheap. Maybe you should give up on them, and not spend either square meters or extra money? In order not to lose in design due to the absence of a door, you can make a decorative frame for the opening.

Ennobling with dobras

Just dismantle door leaves and it will not be possible to leave the opening in this form. The hinges and box won't look pretty. Therefore, the opening will have to be revetted or redone so that it is pleasing to the eye.

Outdated doors can be simply removed

For this, dobras are perfect. Installing wooden fittings on the opening instead of the door will allow you to leave the old frame. It is not necessary to dismantle it, too, if it does not interfere with revealing the opening and sits tightly.

If the box is already worn out and wobbly, then it is better to remove it and use other boards, wider. The dimensions of the board depend on the thickness of the wall, but note that it is better to use a solid board for the wall of the opening. The principle is the same as for the frame. Vertical boards are cut to a thickness of the board less than the height of the opening to assemble a new additional frame.

Additional boards

It happens that the opening is not entirely flat. You cannot do extras without checking the level of the walls. If there are irregularities, then the structure is leveled using wedges. After leveling the boards with wooden wedges between them and the wall of the opening, gaps are formed that fill polyurethane foam and leave to dry.

The foam and gaps will be covered with a decorative strip. If there are no gaps between the wall and the addons, then the addons themselves play the role of a decorative strip. If a old frame it is not dismantled, the extensions are attached directly to it with self-tapping screws. The hole and the cap from the screws will have to be hidden in some way, which is not always possible. You can use dowels and cover them with wooden plugs.

Attention! Hso that the attachment points of the add-ons to the frame are not visible, you can use small stud fasteners that are sunk into the thickness of the board. Such fasteners are not striking, but to work with them, you need a special tool.

Installation of additional elements is similar to the installation of a leveling frame. After using them to get even slopes, you can easily revet them topcoat... The main thing when cutting pieces from facing material - accuracy and calmness.

It is not always possible to achieve even cuts with a hacksaw, so it is better to arm yourself miter saw... This tool is also useful if you want to revet the opening with stucco molding.

Stucco

Another way to beautify a doorway is to use stucco molding. It is difficult to imagine what it is, by name, but ideas may arise in my head that it is being molded with hands, and these are the right thoughts. This technology was used long ago by the Venetian wealthy, who decorated their palaces and houses with plaster. This method of interior decoration, popular in the past, is still used today. The method is yes, but not the way. Gypsum is no longer used by anyone for these purposes.

Polyurethane stucco molding

A technological material - polyurethane - brought it out of use. And the finishing itself is no longer done by hand. The stores sell finished polyurethane products that are attached to the wall of the opening. Selection of patterns, sizes and colors great, but the white finish remains the true leader.

Stucco molding is a kind of decor element that needs to be combined with interior design. Most often, this finish is used in classic styles.

If you are afraid that the stucco molding will attract undue attention, use products with a small relief. Large drawings and complex patterns make the decor heavier; they are intended for spacious rooms.

Stuccoed arch

Corners

There is another way to decorate openings - corners. The plastered surface has an unpleasant feature - it crumbles over time. And the corners of walls and openings remain in places subject to mechanical stress, which entails their abrasion and destruction.

Therefore, corners are used for protection and at the same time decoration. Depending on the direct purpose, perforated corners and decorative ones are distinguished. Perforated corners are also called plaster corners, because they are mounted on a convex corner of the opening even before plastering. The perforated corner gives strength to the structure and increases the service life of the coating.

Perforated corner protects structures from destruction

Perforated products are made of galvanized metal. When installed, they can be given any shape, bent to the desired radius, which allows them to be used to strengthen the arched structure. Perforated parts are attached to self-tapping screws. Then they are putty, plaster, covered with paint or other facing material.

Decorative profiles do not have a direct purpose to ensure the strength of the coating; this is a kind of bonus for this decorative element. Decorative elements are attached to PVC glue or liquid nails. Decorative corners are made of wood or plastic.

Wood profiles are suitable for a small list of styles - classic or country. The wood is easy to grip with glue, it is easy to maintain and clean. But there is one feature - the rigidly defined shape of the product. When a person makes an arch with his own hands, it is more than likely that he will get not a standard, but a unique arch, with its own radius, arc length and other characteristic values. Therefore, wooden products are used only if it is possible to choose corners of the desired size and shape.

Plastic corners are more common. They are matte or glossy, different shades, often imitate wood. White products are more popular, it suits any interior.

Plastic slope corners

What are the benefits of using plastic products? Plastic can be given any shape, with little effort, change the arc angle by 3-4 degrees without the risk of damaging the structure. Plastic decor elements are easily attached. For this, liquid nails or mounting glue are suitable. Note that the use of plastic products to frame the opening will help protect the walls from abrasion and destruction.

It is impossible to glue the plastic corners over the wallpaper, such a fastening is unreliable. Therefore, you will have to prepare the surface in advance and remove excess wallpaper areas. To do this, measure the width of the profile, subtract 3-5 millimeters from it. Cutting off a strip of the same width is not entirely advisable, because flaws may arise in the process. Somewhere a little less or more is cut off. If the wallpaper goes slightly under the strip, the decor will be more aesthetically pleasing.

Then the surface is cleaned of dust and dirt, after which glue is applied to the corner surface with a thin layer. It is applied to the surface of the wall and then removed. The glue will not grab immediately, you need to wait 5 minutes, then reapply the corner and fix it in this position with masking tape.

When framing an arched structure, you will need to bend the plastic angle by a certain degree. This will help a building hairdryer. Under a stream of hot air, the plastic corner will heat up, and it will be possible to bend it without damage.

Important! Do not use open fire to bend the plastic corner.

The framing of the opening serves two important functions. This is an interior decoration designed to emphasize the contours and lines of the opening and, instead, additional protection of the opening from mechanical stress.

In contact with

Comments

Unfortunately, there are no comments or reviews yet, but you can leave your ...

New articles

New comments

S.A.

Assessment

Svetlana

Assessment

Sergey

Assessment

Sergey

Assessment

Alexei

Assessment

Latest reviews

adminadmin

Having decided to get rid of traditional doors, you cannot avoid the question of how you can decorate the resulting arch? In this article we will look at how beautiful it is possible without doors using various materials yourself.

Why do openings open?

1. In some buildings, open doorways are part of load-bearing wall... You cannot remove it; all that remains is to decorate it or turn it into a built-in wardrobe or a niche.
2. Also, open doorways are made to visually unite several rooms: a kitchen and a hall, an office and a bedroom, a living room and an entrance hall.
3. In rooms with a free layout, such openings divide the territory into functional zones.

In addition, open doorways visually increase the space, they do not need to be looked after, as with traditional doors, they can be interestingly decorated, given original form... But this option is unacceptable for those who want to retire from everyone.

Shape of door niches

• Rectangular... This design requires mandatory finishing, installation of platbands and framing. It can be finished with wood or plastic panels with similar platbands, or decorated with stucco or decorative stone.

• Arched construction. It can have a rounded, trapezoidal, ellipsoidal vault, etc. Such an opening visually expands the space, so it is beneficial to do it in narrow rooms. In principle, using drywall is possible.

Advice! When planning to decorate an arched opening, avoid "heavy" and "bulky" cladding methods (stucco or stone with large patterns).

• Imitation of an arch. In appearance, it is similar to an arch, but is made from semi-circular ready-made segments that can be bought at any store. They are fixed in the corners of the niche and decorated in any way.

How to highlight an arched opening

Finishing interior openings done in order to attract attention. There are several design solutions to help highlight the arch:

Advice! If you want the entrance opening to look unusual and original, give it an unusual shape using drywall: ellipsoidal, slope to one side, curly entrance with shelves, etc.

How to divert attention from the doorway

There are situations when it is necessary to visually hide the doorway. To do this, you can resort to some tricks:

1. Will help to make the entrance "invisible" drywall without additional finishing, that is, painted white. Many hang a cornice with curtains over such an opening, decorated with bright patterns and interesting prints that will distract attention to themselves.
2. A wicker frame in the form of lambrequins made of thick threads will also help to blend in with the overall interior.

How to finish a doorway with stone

Decorating a door arch with stone is a great option for:

1. Large, spacious rooms;
2. Premises with a small amount of furniture;
3. If you need to hide any wall defects.

The process of decorating a doorway with a stone is as follows:

• The surface must be prepared: rid of the old coating, plastered and primed.
• On the wall, markings are made for a decorative stone, making the drawing larger from below, less from above. Then the selected area needs to be primed.
• Then a decorative stone is laid out on a flat surface in order to visually see the combination of colors and the intended pattern.
• The artificial stone is glued to the wall with tile glue or liquid nails. You need to start from the bottom corner. If the vertical edge of the opening is laid out with a stone, then it is glued end-to-end to the casing.

Advice! To make the masonry look more organic, sharp corners can be sanded with sandpaper.

• After the glue dries, the decorative stone is varnished or special compositionconsisting of tinting paste, water and acrylic varnish.
• At the end, the plinth is glued to the floor, and the platbands are installed.

Interior decoration MDF

In appearance, MDF is similar to natural wood. The doorway, decorated with MDF plates, looks especially elegant and will suit any style. In addition, they are very easy to install, and a beginner can do this, adhering to the following sequence:

• In the doorway, it is necessary to seal up the cracks and chips, and then nail the guide rails along the edge.
• Next, you need to determine the width of the workpiece, for this, attach the platband to the slope from the outside, the resulting distance will be equal to the width of the slope.
  In this case, it is necessary to take into account the width of the finishing corner along the edge of the casing.

• You can now cut the plank for the top slope using the jigsaw. Using self-tapping screws, we attach it to the rails.
• In the same way, side slopes are installed.
• Further along the perimeter of the opening they glue decorative corners, and then close them with a platband.
• The gaps between the slopes are sealed with wood-colored putty.

Decorating a doorway with plastic

This is one of the most affordable and inexpensive finishing methods. In addition to the price, its advantages include a variety of colors and textures, which allows the material to fit into any interior. In addition, plastic is not afraid of mechanical and chemical effects, it is easy to clean. There are two ways to install such panels:

1. By analogy with MDF boards, i.e. fasten to a wooden frame. However, in this way you can easily damage the texture of the plastic.
2. Provided that the slopes of the opening are even and plastered, the plastic is attached to the base with liquid nails... Plastic ends are closed with special plastic corners... They are attached to liquid nails, it is enough to press them to the surface for a couple.

Other design options for arched openings.

Stucco... It can be made of plaster and polyurethane. The first option is practically not used today, because such panels are very heavy, difficult to install, besides, it is a very fragile material, if dropped, it will simply break. Polyurethane does not differ in appearance from gypsum, but it is lighter and is glued to any surface using liquid nails.

However, this method of decoration is not very appropriate in small apartments with narrow doorways. Polyurethane stucco molding is produced in white color, in the future it can be painted with regular water-based paint in any color.

Gispsokarton. With the help of it, a niche can be given any shape and get a perfectly smooth surface. Drywall is attached to a special metallic profile using self-tapping screws, and the corners are closed with corners. After installation, it is primed and putty in three layers. Then the opening can be pasted over with wallpaper or painted with paint to match the main walls.

Natural wood. This is the most expensive finishing option. But the result is worth the investment. natural wood gives the interior a special chic, comfort and respectability. Besides, it is environmentally friendly, harmless materialwhich does not cause allergies. But you can use cheaper varieties of wood, varnishing it like oak or walnut, while on appearance it will not be reflected in any way.

Beautifully decorating a doorway is not such a difficult task. There are many options for how to make it fit into the style of your home and transform the room for the better, just show your imagination, use our advice.

Design of arches in the apartment: photo

How to arrange a doorway: photo