DIY bread box made of various materials. Plywood bread box: preparatory stage, cutting and assembly How to make a bread box

Usually bread is stored either in a plastic bag or in the refrigerator. But the best place for him is, of course, a wooden bread box. There remains more or less constant humidity and such a bread bin breathes, thanks to which the bread does not grow moldy or stale for a long time. A wooden bread box is not so difficult to make with your own hands.
Here is her drawing:

Of the materials, we need a board with a thickness of 10-12 mm, preferably birch, oak, ash or linden. The pine tree is not good because it will saturate the bread with a resinous smell. You will also need wooden slats for the flexible cover, a handle and fasteners.
We cut out two sidewalls, the bottom and the top bar from the board (see figure).

From the inside, in the sidewalls, it is necessary to make a semicircular groove for a flexible cover. It is better to choose it with a milling cutter. You can use a finger bit on a drill.
The lid itself is made of thin wooden slats... The slats can be glued to a fabric base or inserted into a cord.

If the family is large, you can make a two-tier bread bin according to the same principle:

The bread box can be varnished on the outside or linseed oil, but inside it is better to leave uncovered. However, a wooden bread bin can be decorated with burning, decoupage or painting, as you like.

Please rate this post:

Since ancient times, it has become a custom to store bread in wooden boxes, which are popularly called breadbins. Thanks to this adaptation, the baked goods remained fresh and did not stale for a long time. Modern bread bins perform the same functions as their predecessors, but now they are more functional and easier to use.

Now you can buy this device at any hardware store. But a do-it-yourself wooden bread bin will become a real decoration of the interior of any kitchen and will retain the warmth of the master's hands. Where to start and what material do you need?

First you need to prepare before starting the manufacturing process. Stock up on everyone the necessary tools and materials, prepare drawings of the future product in accordance with the dimensions, as well as the way the door functions. You can even make an approximate layout if this is the first time such work is done. The design is thought of last.

First, you should choose the material from which the body will be made. A DIY bread box can be made from:

• Plywood
• Wood
• Bamboo
• Birch bark

Any of these materials are remarkable for air permeability and moisture regulation inside the bread bin - they are often combined in one product. Thanks to these properties of wood, bread retains its taste and smell for a long time. For fasteners and connections, small screws, wood glue are used. Small awnings and a handle may be needed depending on how the door will open. Bread boxes are made in several types, depending on the way the door is decorated:

• Simple
• Threaded
• Blinds

A standard carpenter's kit will do the job. The surface finish of the product can be a wound - it is determined by the design, and accordingly decoration Materials to cover.

Making a wooden bread box with your own hands is quite simple. It is worth considering that ideal option for this will be linden, ash and birch. Pine and spruce have too persistent odors that bread will absorb. The manufacturing process itself can be broken down into the following stages:

1. According to the drawing, all the elements are cut out of the tree, which should closely fit together. The sizes can be arbitrary. An example of parameters is shown in the figure.
2. Parts can be connected with screws, furniture studs or wood glue. More skilled craftsmen use a thorn connection. Spikes are formed on some parts, and grooves on others.
3. The seams at the joints are coated with glue for a better connection. In this case, all connections must be carefully processed. This is done with sandpaper.
4. At the end, a door is made. A modern wooden bread bin is usually equipped with a curtain door, which is made of thin strips.
5. In order for the curtain door to move, you need to make a groove inside the product body, along which this element will move.

You can make a version of the door of a simpler sample. In this case, the curtain will fold outward. It is also made from thin strips. Often the planks are replaced with a bamboo rug that is stitched with strong thread.

In any case, such breadbins will be quite spacious and functional. Thanks to the material, the product is completely environmentally friendly and will suit any interior style. The surface can be opened with varnish on wood, having previously painted with a pattern. Those who do carpentry can decorate the case with wood carvings.

Plywood as an analogue to wood

A cheaper analogue of wood is plywood. A do-it-yourself plywood bread box is made according to the same principle as a wooden one. The main thing is to draw a sketch of the future product and cut all the components with high quality. Plywood is difficult to handle as the edges can flake off, so be very careful. To work you need the following tools:

• Jigsaw for sawing
• The drill will form holes for connecting parts
• The sander is designed for processing saw cuts

The final stage is assembly. The figure shows the simplest example of this procedure.

The body elements can be connected using glue, self-tapping screws and grooves. Door hinges are installed from the outside. At the end, general grinding is performed, and then the surface is decorated. There must be ventilation holes in the case.

Bamboo bread bins

The bamboo material is not only a decoration for finishing the body of the finished product. Craftsmen often make small bread bins from bamboo napkins. Such a product will be made for several hours, and not days - this is the main plus.

For work you need:

• Bamboo napkin
• Cardboard
• Self-adhesive
• Scissors
• the cloth
• Pencil for marking
• Decorative wooden handle

The dimensions of the future product are determined by the parameters of the napkin. The body is made of cardboard. The side walls on one side must be rounded. This is done to ensure that the door closes smoothly and fits snugly against the structure.

Parts are glued together with glue. Above, from the inside, the made body is pasted over with self-adhesive. Thanks to this technique, the cardboard will become much stronger. The final step will be the bamboo finish. Cut the napkin into two parts. The first one is the size of the bottom, and the second one is the door. Customize the finish to make the product unique.

Birch bark

Many craftsmen are interested in: how to make a bread basket from birch bark? This material is very soft and pliable to weave. It is difficult to buy this material, but you can make it yourself by cutting off the top layer of birch bark.

Since the body of the product is formed thanks to weaving, the bread box in its own way appearance resembles a box with a lid. Over time, the birch bark material hardens.

Weaving methods:

• Mat
• Angular

In this case, you need to monitor the formation of the edges of the panels - they should be even and tightly woven. To do this, use a few basic tricks, adding rounding strips.

The cloth for the lid and bottom is woven of the same size, it also applies to the side sections. The connection is a birch bark tape, which is woven into the gaps of the panels. Do-it-yourself birch bark bread box will make the interior of the kitchen more unique and authentic.

You can buy a ready-made bread bin at any agricultural store, but a handmade container for storing bread will cost much less. There are many options; an experienced and even novice carpenter can easily make a model out of wood, and an ordinary housewife will effortlessly make it out of cardboard and bamboo rugs or from plastic bottle.

Made of wood

The wooden bread bin retains the natural moisture level and is breathable, which allows baked goods to stay stale for a long time. Also, mold spores develop much more slowly in it. And if you decorate it with decoupage, burning or artistic painting, then it will also serve as a decoration for the kitchen interior.

Tools and materials

To make a wooden bread bin you will need:

• Joiner's glue.
• Board 10 mm thick.
• Thin wooden planks 340 x 25 x 6 mm.
• A small piece of linen.
• Saw-hacksaw.
• A sander or a piece of sandpaper.
• Jigsaw (if you plan to make a curly back wall).
• Fraser. In the absence of such, a drill with a finger cutter is also suitable.
• Screwdriver and self-tapping screws.
• Ruler, compasses and pencil.

Manufacturing procedure

Making a bread bin with your own hands is not difficult if you have minimal skills in working with wood:

1. Markup. With the help of a ruler and a compass on the side of the board, which will be the seamy side, draw the outlines of the bottom, side and rear walls, the fixed part of the lid. The drawing shows an image of a conventional rectangular back wall, but if desired, its top can be carved. In this case, the width of the back is left the same, and the height is increased.
2. Sawing out. With a hacksaw, the board is cut along the outlined lines. If necessary, cut out curly parts with a jigsaw.
3. Training. On the side walls from the inside, grooves are made along which the movable cover will move. Folds are also cut into them for connection. In the bottom, grooves are cut for fastening the side walls. In the upper fixed part of the cover, a rebate is selected for attaching the rear wall and grooves are made to connect to the side walls.
4. Grinding. All parts are processed with a grinder or emery.
5. Manufacturing of a movable cover. Wooden planks in the amount of 13 pieces are attached to the fabric using wood glue so that the edges on the right and left protrude about 1.5-2 cm beyond the edges of the fabric. The planks should be located close to each other. Furniture brackets can be used instead of wood glue. To make it convenient to close and open the bread bin in the future, you should attach a handle to the lid or just glue a small piece of wood.
6. Assembling the bread bin. All parts are connected together with glue and screws. It is necessary to ensure that the side walls fit snugly against the bottom, lid and rear wall. It is highly discouraged to make a glued-free connection, since a constant flow of air from the outside will cause the bread to stale quickly.

When all the main work is completed, the bread bin can be decorated as you like. Most often it is varnished or impregnated with linseed oil. Inside, the tree is not treated with anything.

It is best to make a bread bin made of birch or linden, ash and oak are also suitable. But it is undesirable to use pine, because the bread stored in it will acquire a resinous, coniferous smell.

Made of cardboard and bamboo rugs

Such a bread bin is cheap supplies and ease of execution.However, due to the lack of tightness, it is not able to ensure the storage of bread for a long time. Also, its size will be limited by the size of the rugs, so you won't be able to make a large one.

Tools and materials

Before starting work, you should prepare:

• Scissors or utility knife.
• Awl.
• A needle and thread.
• Bamboo rugs.
• Glue gun.
• A piece corrugated cardboard... It is not necessary to buy a new sheet, you can use a clean and whole large box. However, do not take boxes from household chemicals and other items that have a strong odor and are unsafe.
• Self-adhesive film.
• Flat decorative cord, tight and dense lace or other material for trimming the edges. Needlewomen who own the skill of knitting can crochet the edges around the perimeter using cotton or rayon threads.
• Ruler and pencil.

Step-by-step instruction

Making a bread bin from cardboard with your own hands does not take much time:

To keep the bread better, before placing it in such a bread bin, it is worth wrapping the loaf with a linen towel or napkin.

From a plastic bottle

The plastic bottle bread box is not intended for storing bread. The sliced \u200b\u200bproduct is placed in it just before serving.

Tools and materials

In order to create this masterpiece of needlework, you need to buy or find at home:

• A five-liter rectangular bottle with smooth walls. Bottles with different concavities and bulges, too ribbed will not work.
• Acrylic paints. You can choose their color according to your taste by choosing beautiful combination... Recommended - black, lilac and gold; they will give the product a vintage look.
• Scissors.
• Acrylic lacquer.
• Brushes.
• Newspapers.
• PVA glue.
• Multilayer napkins.
• Glue gun.
• Transparent tape.
• A handful of half peas.
• Ruler and felt-tip pen.

Description of work

The process of creating such a bread bin will require perseverance and accuracy:

• Cutting out the main parts. This stage consists of several steps:
  1. Cut off the bottom and neck where the ribbed part begins.
  2. Measure 8 cm with a ruler on two parallel sides of the bottle in several places, making a mark with a felt-tip pen. All marks are connected in one line, along which they are then cut with scissors.
  3. The bottom is cut exactly in half and the concave parts are cut out.
  4. A narrow neck is cut from the neck so that a workpiece remains in the shape of a cut cone.
• Start of assembly.Two semicircular parts, which were obtained from the bottom of the bottle, are glued with tape on both sides of the "boat" formed from the side part.
  
• Pasting with newspapers. To do this, they are cut into strips, and the glue is diluted with water in a ratio of one to two, after which the plastic blank is pasted over in two layers. Newspaper cover should be both outside and inside. The same is done with the tapered part.
• Creation of curly edges. You need to make semicircular waves along the upper edge of the boat part and the lower edge of the cone part. They are cut with scissors, and to make the semicircular protrusions the same, use a coin or a circle cut out of cardboard as a template.
• Breadbasket decoration. It takes place in several stages:
  
• Coloring. First, the entire surface of the bread bin is covered with black acrylic. On top of it, plaits and peas are painted in a dark lilac color, and after drying, a golden paint is applied to the bulges.
• Varnishing. At the end, the bread bin is varnished and, after the varnish has dried, it is used as intended.

A handmade bread box will delight the owners of the house and surprise their guests, because if you show your imagination, such an item will turn out to be exclusive.

More often whole), the lobe is stored either in the refrigerator or in a plastic bag. But the most the best place Bread storage is considered to be a wooden bread bin that breathes and maintains a constant level of humidity. For this reason, the bread in it may not grow moldy and stale for a long time. Such a wooden bread box) (well) of course under the arm is easy to make with your own hands.

How to make a wooden bread box with your own hands?

If you are interested in making a bread bin, you will need riveting with a thickness of about 10 mm. For the bread bin, best suited are swindle, ash, oak and birch. You should not make a bread bin made of pine, so (that is) in this case, the bread will be saturated with the smell of resin. Excluding this, you will need only wooden slats for the manufacture of a flexible cover, fasteners and a hand.

From the board you need to cut the bottom, the top bar and two sidewalls. Inside, take both sidewalls, you need to choose a semicircular slot so that a flexible cover can be wound around it. Better goodbye to make grooves with a milling cutter. To do this, you can put into action a finger cutter installed with a drill.

The cover is made of thin wooden slats, which you can either stick to the fabric base, or insert a cord inside.

If you do not have a big surname, then you can make a two-tier bread bin using the same principle.