Homemade armrests for a car how to make. How to make an armrest in your car. Consumables and tools

how to do elbow do it yourself? how make an armrest in car?

Probably, every car enthusiast thought about how to distinguish his car from the background of others with the help of various body kits, spoilers and other tuning elements. How to do it yourself How to make a leather armrest in a car with your own hands for. Yes, it is possible that these details will add sportiness to your iron horse, however, comfort and power will not be added to this. Therefore, it is worth considering a more practical tuning option, for example, an additional armrest.

Such a thing will not only hide a lot of "little things" (keys, documents, etc.), but also make the interior of the car more interesting and unique. How to remove the EGR valve with your own hands? - forum. And how make an armrest in car, our today's article will tell.

Preparation for work

Where to start making this element? It is best to start with measurements and drawings of the car armrest. Before starting work, carefully measure the distance between the seats in the front row, and then write the obtained data in a notebook. Based on the measurements, you will receive a future picture (drawing) of your armrest. Remember that this diagram is of particular importance, since it is with these values \u200b\u200bthat you will manufacture the part. It is also worth considering that the distance between the seats can differ significantly even for similar brands and models of cars. Helpful information about how to repair a tire with your own hands using improvised means. Every motorist had to deal with the repair of wheels and tires of a car. Thus, if your friend has exactly the same car (by make, model), then you should not take measurements in it. Pump functions in the car design. How to do it yourself: tools, pipes, an additional pump. Video guide to removing and replacing brake pads and discs Audi A4 B5 (Audi A4 B5) - how to make auto repair with your own hands - videos and articles. Be sure to only calculate the distance with your car.

It is important to remember that in addition to the backs of the driver's and passenger's seats, there are such important details as the handbrake lever and the seat belt in the car. When measuring, take these features into account, since otherwise the armrest will not give you the opportunity to properly fasten the belt or turn on the "handbrake". After all this, you can safely get to work.

How to start making car armrest?

Read the same

Everything is very simple - for work you need to take some kind of sawing tool for wood (for example, an electric jigsaw) and a wood sheet.
The latter can be obtained from old door cabinet made of chipboard. All important measurements should be marked on it according to the drawing and cut along the contours.

Now the assembly

The armrest assembly will be a more complicated process. To do this, you need to mark the part and drill holes for self-tapping screws. Then sweats are made in the box. At the final stage of assembly, the outer side of the structure is sanded with coarse sandpaper. But this is not the end of our work on the manufacture of the armrest. We also have to sheathe the entire structure with fabric sheathing.

Decorative cladding

How to trim the armrest by their hands? The best place to start is with the choice of material. How to make do-it-yourself car body repair. Body repair with your cars already. The final choice here depends on the brand and prestige of the car. For example, if you do armrest to the Gazelle do it yourself, then it would be most reasonable to sheathe it with leatherette. How to make an armrest with your own hands on a Mitsubishi car installed in the car. The same applies to domestic passenger cars... Made armrest (VAZ 2107) it is recommended to sheathe the cheapest material. For more pathos and chic, you can use Alcantra. How to make a wick at home? Wick for. How to install and remove door trim in Skoda Fabia. If you decide to replace the skoda fabia door trim with your own hands, then it is better to do everything in the following sequence: It is not recommended to use leather as upholstery - it is very expensive, and besides, not every car enthusiast can handle it by sheathing the armrest by their hands.

1. How to do leather armrest in car by their hands plywood skin

We do armrest in a car at home. According to a cardboard template, 10mm plywood blanks, frame assembly.

Armrest by their hands for Renault Sandero Stepway

My Instagram: Instagram followers boost here:

As for the color of the material, in most cases it is the black armrests that fit organically into the car interior. If you want to be original, experiment with upholstery colors - most often black and gray shades overlap in the elements of the car interior.

Read the same

The very process of sheathing occurs along the contours with the help of an arched PVC corner. As a rule, this work takes no more than 20-40 minutes of time from a motorist.

We do armrest at VAZ do it yourself: cover making

The entire armrest structure is almost complete - only the cover remains. She needs to be given special attention. Armrest should not be tough, therefore foam rubber should be used to make it soft. If this is not at hand, then ordinary body sponges are quite suitable as an alternative. Just one armrest you will need no more than 4-5 such sponges.

So where do you get started? First of all, glue is applied to the chipboard surface, after which sponges or a piece of foam rubber are placed here. After the adhesive has dried, the washcloths are sewn together, and the excess pieces are cut off with office scissors.

In order for our armrest was as even and elastic as possible, it is necessary to cut a rectangle out of thin felt and nail it on both sides of the structure.

In the next step, the felt is glued to the sponges and sheathed.

How to install hinges and furniture magnet?

In order for the cover not to open constantly while driving, you need to hold it with something. This article contains a detailed photo report on how to make a steering wheel heating with your own hands, using available tools. Castle in armrest we are unlikely to install, but the furniture magnet is just right. After installing this element, you can proceed with the installation of the hinges. How you can make a silent block remover with your own hands, what tools you may need for this and how to save on repairs, find out right now. We fasten them with self-tapping screws.

Read the same

Then all the elements go through the centering procedure, and the cover is finally screwed to the main part of the armrest. But that's not all. How to make a candle wick, depending on which one is better in beeswax candles. In order for the magnet to hold the lid, a small metal element (plate) must be installed on the back of the structure. The search for ways and options for how to make an armrest in a car with your own hands, if it is not supposed to be there according to the staff schedule, is occupied by many motorists who have such a convenient fit. We place it strictly above the magnet, otherwise it won't bring any functionality. There was a puncture in the car's tubeless tire. How to make a DIY tubeless tire repair? In the final step, the sharp edges of the armrest are filed. The same goes for the lid.

How to install the armrest do it yourself in the car?

This is perhaps the most important task for a motorist, because the ease of use and the duration of its operation in general depend on how correctly the box is installed. The task is further complicated by the fact that during installation the car owner can easily spoil the interior parts. How to make candles with your own hands: detailed. It is also unacceptable to use the so-called "collective farm tuning" inside - it will only aggravate this situation.

How to mount armrest by its hands in the car? For the very installation of this element, you will need the following set of materials:

1. One polypropylene tube with a steel core.
2. Hairpin M8 100-110 centimeters long. We will need it to fix the plastic in the cabin (in all cars, under the decorative plug, the plastic is held on very short bolts, so we will lengthen them).

That's probably all you need to buy to install the armrest in your car. By the way, in order to achieve a secure attachment under the decorative plug, it is recommended to drill another hole (in total, you will have 3 of them).

Installation steps

Cut hairpins are inserted into the holes. A metal plate is placed on the back of the plastic and then the whole structure is twisted wrench.

Next, a rectangle is cut out of the plywood board, which is then sheathed with leatherette. Several holes should also be drilled in it. We mount the part in place and put on polypropylene tubes. Next, a hole is marked on the box and cut out, after which it is installed in place. It should be fastened with reinforced washers and nuts. Everyone, at this stage, the question is how to do armrest by their hands, can be considered closed.

Read the same

Post Views: 2

The armrest has long been considered an integral part of comfort for high-end vehicles. However, cheaper models cannot please their owners with this pleasant and useful item. Of course, the armrest of the VAZ 2107 can be bought. However, this is not the car for which it is customary to buy expensive bells and whistles. If you are the proud owner of the Russian "Seven", you can and should do everything yourself! So we will discuss in this article with you how to make a homemade armrest inexpensively and with high quality.

Is he needed at all?

It seems that since you are reading this article, you personally really need it. Or maybe not really needed, but I really want to. Why not fulfill this simple human desire?

Moreover, this thing is very useful. Many drivers note that having a good armrest greatly relieves the stress on the back and arm muscles, especially if the vehicle is equipped with a manual transmission. If you consider yourself to be reasonable sane drivers, then your seven has just such a box.

Also, the armrest is very convenient to use as a storage place. necessary little things... Someone here carries water or a mobile phone. For many, this comfortable spot storage case for glasses. Someone puts documents and wallet here. If desired, you can make the device so that it will have buttons to control some of the car's functions.

So installing an armrest on a VAZ 2107 is not a luxury, but a piece that is quite justified from a practical point of view.

How to prepare for work

Choosing a material for the frame

Most best material - this is a tree. Moreover, you can use and regular board... But chipboard, fiberboard or any plywood behaves much more conveniently in work. If you want a structure without corners, then you can only use plywood, as it allows itself to be bent. To do this, it is held over hot steam or soaked in water.
Pay attention to the thickness of the material: the best option is 1 centimeter. A small variation from 0.8 to 1.5 centimeters is possible.
Ordinary foam rubber is used as upholstery on the lid.
Of the tools you will need: jigsaw, graph paper, meter tape.

We make measurements for the future drawing

Of course, you can use ready-made diagrams and drawings. But for everything to work out reliably, it is better not to rely entirely on information from the Internet, but to act independently. Therefore, we act according to the following scheme:

1. Measure the distance between the two seats.
2. Sit in the driver's seat, grab the gearshift lever and determine what height of the future armrest is most comfortable for you.
3. You also need to measure between the back of the seats and the handbrake.
4. It is necessary to determine what is the distance between the buckles of the seat belts.
5. Measure the lift of the hand brake and its dimensions.
6. You also need to find out the dimensions of the attachment point of the future product.

When making all the necessary measurements, remember that you will also need to take into account the thickness of the upholstery that you plan to use later.

Design process, drawings and diagrams

After the measurements are made, you can start drawing the future product. You need to be extremely careful: a small mistake can cause the armrest to not snap into place or interfere with the normal functioning of other elements of the car.

You can use ready-made sketches and diagrams. But even in this case, you need to adhere to the following tips:

Manufacturing

This work is quite simple for those who have held a jigsaw at least once in their life. If all measurements have been made correctly and you have completed good drawing future product, then you just have to follow these steps:

Wrapping process

To cover the product, patterns from graph paper will again come in handy. We hope you haven't thrown them out yet. You will also need about running meter selected material for covering, high quality glue, nylon threads, a good hair dryer.
First, let's discuss in more detail what materials and tools are best to choose.

The most obvious material for covering the interior elements is leather. You can choose both natural leather and eco-leather. The main thing is that the material is really of high quality and does not crack in the cold. It is best to buy specialized leather for cars. The material that is intended for furniture is hardly suitable. After all, furniture is usually used in a comfortable home environment. And the car will be exposed to both direct sun raysand severe frosts.

Owners of the VAZ 2107 also often choose Alcantara as trim. Its cost is about the same as that of genuine leather. Cheaper materials are usually of lower quality. The good thing about Alcantara is that its velvety surface is pleasant to the touch and protects against fogging of the elbow. It is easy to clean from dirt, it easily tolerates temperature extremes. It is not difficult to use it in the process of pulling the elements of the interior. You can even buy Alcantara with a self-adhesive base, which will make it much easier to work with.

Glue - very important stuff for further work. The Moment glue is not suitable for the armrest. Over time, it will cause the skin to bulge and peel away from the body. It is best to use a special glue for auto leather.

In order to make the glove compartment look pleasant from the inside, you can use an ordinary carpet. It is inexpensive, scratch resistant, and tear resistant. This is very practical considering what you will be storing inside the product.

So, we turn to the description of the tightening process itself.

Installation

Most often, the armrest is installed as follows: clamped with bolts that hold the seat belt buckles. The seats will have to be moved forward, the mounting bolts will need to be unscrewed, the fork-shaped armrest fastening brackets have to be inserted there and the bolts tightened back. Some also make special corners with which the armrest is attached to the floor with self-tapping screws.

Many modern cars come standard with an armrest between the front seats. Not surprisingly, the armrest is a very convenient thing on long trips, or when standing in traffic jams, as a support for the driver's right elbow. And when he is not busy with the driver, the front passenger can also use it. We will also be puzzled by the choice of an armrest for the VAZ 2109.

Exists different kinds armrest designs that can be installed in the "nine".

Universal armrest. This can be made from plywood yourself and sheathed suitable material - leatherette, fabric, or buy ready-made. It is usually attached to the parking brake tunnel, and has a box for small things. But such an armrest often does not have the function of transferring it to the tilted position, due to which access to the handbrake is difficult. And such armrests do not look like a fountain. Therefore, this does not suit us.

Armrest Alamar. This is perhaps what you need - it fits well into the interior of the car, if necessary, you can fold it to a position parallel to the seat back. But the truth has no compartment for small things. Here everyone decides for himself what is more important for him.

For installation on a VAZ 2109, I chose the Alamar armrest. You can order this on the Internet, it costs 430 rubles, plus about 300 rubles for postage by cash on delivery, plus the mail commission for cash on delivery upon receipt. Total comes out in the region of 800 rubles. The kit includes installation instructions.

We move the seat forward, and unscrew the seat belt mounting bolt by about 1 cm (you can not completely unscrew it). Further, sliding the seat back, unscrew the bolt by 10. The bolts to be removed are marked in the figure:

With the lower end of the armrest bar (“fork”), install it on the lower bolt. The instructions show the bolt head - belt bracket - armrest bar placement sequence. In this case, it may be necessary to slightly bend the seat belt buckle bracket at the installation site, since it will rest against the armrest bar, due to which the belt buckle will be located lower than it should be.

We take the “10” bolt from the armrest kit, and with its help we fasten the armrest bar by screwing it into the hole instead of the standard bolt previously unscrewed (the standard one is shorter). We tighten the lower bolt (which is 17) to the end.

Well that's all, the installation of such an armrest took about 20 minutes.

Now about the impressions of use. It has become more convenient, the armrest does not interfere with shifting gears, but in order to use the handbrake, it is better to fold it back, although you can adapt this way. Of course, at first it was a little unusual, since there was a support for the right hand, but after traveling a little with the armrest, and then throwing it back, you feel an inconvenience: something is missing. If there are those for whom the armrest interferes with driving, it can always be folded back - in this position it does not reveal itself in any way. I recommend for installation.

The interior of any car should be as comfortable as possible for the driver, because some users spend several hours without rest. Therefore, every little thing becomes important and weighty, for example, an armrest, which can reduce tension in the arm, take the load off the shoulder and relax the elbow. But not all cars are produced with this element in the cabin. Many car owners are trying to create armrests for cars with their own hands, and even quite successfully.

What is the correct armrest?

The idea of \u200b\u200bcreating an element for the location of one of the driver's hands on their own makes sense. Buying such a factory-made design is not an easy undertaking. It is expensive, it is difficult to find a design with suitable sizes, appropriate design and the internal functionality that you require. There is only one way out - to delve into the manufacture of armrests for cars and try your hand at this fascinating business.

We need a "correct" armrest, the design of which will take into account all the nuances, its ergonomics have been brought to the maximum value, and will fully correspond to the interior decoration of the car. To do this, you need to pay attention to the following points:

• the presence of a separate compartment for storing important little things, which can be easily and quickly found;
• the ability to put a bottle of water or a glass of tea / coffee;
• the presence of a sliding and reclining mechanism to impart mobility to the structure and provide access to the hand brake and seat belt latch;
• the use of soft yet durable materials that provide a comfortable and comfortable hand position.

It is such an armrest in the car that we will make.

Stages of creating a structure

There are several schemes for creating this structure. Some of them are simpler and less labor intensive, while others are too complex and incomprehensible. We tried to create such a work plan that can be mastered even by an inexperienced car owner in design, not spend a lot of time on this and at the same time get a reliable product that will meet all the above requirements.

Removing dimensions

Here you need to show maximum attentiveness and concentration. The accuracy of measuring the distances and dimensions of the place for the future armrest will affect the parameters of the finished structure and its location. It is necessary to carry out these actions only in your car, because in two cars of the same brand there may be discrepancies in the salons.

All the data that you will receive must be written down, it is better to immediately on the sketch of the future product. Thus, the measurements will not be confused, they will be clearly, accurately and without errors recorded. You will need to measure the following parameters:

• at what distance from each other are the front seats;
• find out the distance at which the position of the driver's hand is most comfortable (get into the car, take the wheel with one hand, and bring the other into a relaxed state and put in the usual position);
• turn on the handbrake and measure the distance from it to the back surface of the seat back (the comfort of the rear passengers cannot be ignored);
• note the distance between the latching mechanism for the seat belts.

Make a visual comparison of the location of the future structure and its dimensions, stopping at the handbrake. Interested in the relative position of the handbrake and armrest. If the last element enters the parking brake territory, then at the stage of taking measurements it will be necessary to measure the lift height of the brake lever.

Project creation

So, measurements recorded and verified, it's time to create a paper prototype of the future design. Do not be lazy and make several options that will reflect the armrest for the car in different angles. Transfer all dimensions to each drawing and make sure they match.

Now you can start marking parts and small drawing of each element that will make up the future structure. We pay special attention to the following points:

• we indicate the dimensions on each element, if it is curly, then we determine the radius;
• mark the attachment points, choose the method of connecting some elements with others and indicate the length of the screws, if any;
• we calculate the distance that remains to the edge;
• for the upper part, which will serve as a support and a lid at the same time, you will need to mark the location of the mount with a swing-out functionality (you can make a sliding top, but this will be somewhat more difficult).

We decide on the method of fastening

Think about the method of attachment. The car armrests can be tightly fitted between the seats or fixed with special fasteners.

If you decide to stay on tight fixation, then you will need to prepare grooves in the lower part of the structure, corresponding to the details in the area of \u200b\u200bthe intended installation site. Immediately you need to decide and take into account its thickness when marking up the project.

Making fasteners yourself is not an easy task, but the result is worth your efforts and the time spent on this process. The armrest elements at the bottom of the armrest must be tied to structural elements the interior of the machine or to pre-fabricated fasteners.

Each of your decisions must first be transferred to the drawing, and only then implemented. This way you can avoid mistakes and inaccuracies.

Choosing materials and completing the work

You can choose any wood-based material to create the body and support parts. Its thickness should be at the level of 8 mm. In the absence of rounding, you can not limit yourself in the choice of material, otherwise it is better to stay on plywood, which can bend under the influence of water vapor. To cut out the constituent elements of the structure of the required shape, you need to have a hacksaw at hand, or even better a jigsaw. Any material that you like is suitable for cladding. But remember that it must be resistant to wear and tear, have a long lasting color and match the design of the machine.

So, the parts are cut and ready for assembly. Prepare the patterns on upholstery paper. Using glue or fixing elements, we assemble our homemade armrest into the car. If no mistakes were made earlier, then problems will not arise.

According to the patterns made earlier, we cut out the elements for the upholstery and fasten them with a furniture stapler or glue. We are engaged in a lid, which should be soft and slightly rounded. You will need foam rubber or regular dishwashing sponges. We place the selected material, glue and cut off unnecessary elements. We cover with felt, which we carefully glue along the edges. It remains to fit the finished armrest and.

To some, this work may seem difficult, impracticable and very time-consuming, but it is difficult just to get started, and then the work will boil. Before you even know it, the car will already have a brand new armrest with a universal design and organization of the interior space. Try it yourself and tell your friends how to make an armrest in a car.

The search for ways and options for how to make an armrest in a car with your own hands, if it is not supposed to be there according to the staff schedule, is occupied by many motorists who have so much convenient fixture for the driver in the car is missing. If, in principle, it is provided on the model, then you can, of course, drop into the store.

But, first of all, the factory version may not suit you - first of all, on the basis of height. A person with a height deviating from the framework of 165-180 cm is considered somewhat non-standard, and there are no dimensional specifications for him. So the offer from the manufacturer may not be comfortable.

Secondly, it is not a fact that the price requested for the device will suit you. Sometimes you get the impression that you are not looking after the armrest, but at least the driver's seat.

And, thirdly, if the armrest is not available for your model, it may not fit into the space intended for it. However, not everyone wants to do without it. Drivers especially miss the armrest on long journeys - it seriously makes life easier, not only supporting the arm, but also relieving the load on the shoulder, neck and spine as a whole.

How to make an armrest in a car with your own hands, for ease of perception, we will divide the instructions into several stages.

Measure seven times

Before you start sketching, you need to figure out what type of armrest you are interested in. Decide whether it will go on the handbrake, how far you can extend the drawer towards the back sofa, make it stationary or removable, or divide the internal volume into compartments. Based on all the data, measurements are made:

• the distance between the front seats;
• the height of the armrest from the floor at the rear and from the console at the front - to extend the wall at the rear if necessary for greater harmony appearance... You can determine a comfortable level by sitting behind the wheel and holding your hand alternately: either the steering wheel or the gear knob;
• the distance between the anchorages of the seat belts on the driver's and passenger's seat;
• the lifting height of the parking brake, if it is partially hidden in the box;
• distance to the gear lever.

According to the numbers received, a layout is made from cardboard and installed in the place of the future armrest. You can even ride with him to check if the box is comfortable for your hand and does not interfere with the operation of the controls or the comfort of passengers.

Materials for construction

When the layout is verified, you can buy everything to bring the idea to life. You will need:

• Plywood, chipboard, fiberboard or compressed cardboard for the base. It is not necessary to take sheets thicker than 8 mm;
• Self-tapping screws for fastening parts. You can put them on glue, but the design will turn out to be more flimsy;
• Door hinge - so that the top cover can be folded back, and the interior space can be used to store small things;
• You can make it simply removable, but it will be less convenient to use the box, and the lid may slide off when you drive;
• Sheathing material. Suitable: leatherette or dense fabric for furniture;
• Foam rubber - put under the cover tight to make the armrest softer.

Enthusiasts can stock up on wires and bulbs - make a backlight inside the box or move the cigarette lighter, window buttons, etc. into it.

Master Class

If the layout has been fully approved by you, you can use it as a template.

• The contours of all parts are transferred to the lumber;
• The component elements are cut with an electric jigsaw;
• The body is assembled according to the drawing. Just in case, you can first buy it, try it on to the car, and if it doesn't fit, correct it;
• If your handbrake is located in the armrest slot, keep in mind that the tree will be visible through it. Therefore, the insides of the box must be painted over or pasted over with material;
• Foam rubber is glued to the outside of the lid. By the way, it can be replaced with ordinary kitchen sponges. It is better to lay felt on top of the softener: it will prevent the foam rubber from being quickly punctured. Or lay the latter in 2-3 layers;
• The cover is covered with the selected material;
• A loop is placed connecting the lid and the box itself;
• The armrest body is covered with leatherette. Sometimes they just paste over the walls, but this is not the most best idea: an accidental cut - and you will tear off the skin with your teeth. It is better to use wallpaper studs or a furniture stapler for these purposes.

If the plans were to transfer part of the control inside the box, after installation, wires are pulled through the left hole. And the backlight can be done - it has an adhesive tape on the back, with which you can easily fix the segment in the right place. As you can see, there are no tricks and difficulties in how to make an armrest in a car with your own hands. Basic knowledge of primitive tools, minimal investment - and you have an option that fully meets your needs.