House for children with their own hands. Step by step photo instructions. Blueprints. Doll life modeling design DIY doll house for my daughter my experience paper cardboard corrugated fabric DIY house for daughter on the street

Once upon a time, we built constructions for games with chairs, pillows and blankets. So why not help the younger generation today and build a real children's house with your own hands? You can use any materials at hand - wood, PVC or aluminum pipes, plywood, wooden pallets or thick cardboard.

Play house in the apartment

Even in a room of a small area, it is quite possible to install a small frame, covered with fabric, in the form of a tent or a wigwam. If square meters allow you to build a full-fledged wooden or plywood house in the nursery in the form of a fabulous hut, carriage, trailer, rocket or ship.

House-wigwam

As you know, a wigwam is a special design, consisting of several long poles connected at the top and covered with dense fabric. Such a structure can be easily disassembled and put away for storage, moved from room to room, taken out into the fresh air, into the yard, or packed in the trunk of a car and transported to a garden plot.

And making such a playhouse for a wigwam is not difficult at all.

You can use as a framework:

• carefully polished and coated with varnish or linseed oil wooden slats 120 cm long and 2-4 cm thick; for installation in the fresh air, you can also use strong tree branches, but only if (!), if even the smallest twigs are cut down
• plumbing PVC pipes
• lightweight aluminum pipes, for example, left over from old curtains

For tight-fitting a tent house, it is better to choose dense linen or cotton, which is good for air permeability. Under such an awning, children will feel comfortable and breathe easily even on hot days.

The simplest wigwam structure - three poles, firmly connected in the upper part at a distance of 10-20 cm from the apex. To make the mount strong, it is still better to connect them with bolts, drilling holes in the upper part of the frame.

The design can be slightly complicated by making a rigid base for it from wooden slats or pipes, which will be installed on the floor. From the side of the entrance to the wigwam, the crossbar does not need to be done - the children will constantly stumble about it.

In principle, you can also build a full-fledged tent in the form of a quadrangle or a tent, but you will have to tinker with the frame mountings a little longer. We will talk about this below.

Several small pillows made of colored fabric, a mattress or a soft fluffy carpet will decorate the children's wigwam and make it more comfortable.

PVC pipe tent or tent

People's craftsmen have long been using plastic water pipes not only for their intended purpose. After all, they make quite durable and comfortable garden chairs, tables and even greenhouses.

Decorate the windows of such a makeshift house with chintz curtains and lay a rug. Outside, the dwelling can be pasted over with a cloth, the remnants of wallpaper or colored napkins, painted with paints, decorated with appliqués, bright balloons, flags and garlands.

Let your child participate in the finishing process by handing him a brush and paints.

Plywood construction

It will take no more than a couple of days to make such a house:

1 There are a lot of drawings for making a children's house in the network. You can use any of them. We will only describe the assembly principle itself.

2 The floors in the house are warm, and the house can do without them. But still, it is better to make a small elevation using wooden lag bars with plywood screwed to it. It will be more convenient to attach the frame to such a base, and the structure itself will be more stable.

3 We mount the frame from the racks-bars attached to the floor. It is better not to use nails - they can loosen. Fastening with screws will be much more reliable and durable.

4 Horizontal jumpers are screwed across the posts.

5 A bar is attached between them, which forms the ridge of the roof.

6 For gable roof you will need to make a pediment - wooden slats knocked down in the shape of a triangle.

7 It remains to sheathe the walls and roof with plywood, paint it or paste over with wallpaper.

8 The roof can also be made single-pitched, sewing the upper part of the building with plywood at a slight slope.

8 The door is made from wooden boards or they make only a frame for it, but itself door leaf cut out of plywood. They hang it using ordinary metal hinges, which can be purchased at a furniture store.

9 The house can be painted or pasted over with cloth, wallpaper or bright applique from the inside.

10 Curvilinear figures from plywood at home are cut out with a jigsaw. If you know how and love to work with wood, make furniture for your child that he can put in his new house.

11 Plywood can even be bent by soaking it in the bathroom. Thick sheets should sit in water for a couple of hours. For thin plywood, a 10-15 minute soak is sufficient. The softened part is laid on the surface and fixed with self-tapping screws, so that during drying it takes on the desired shape.

12 The plywood is painted with ordinary oil or enamel paint. Do not forget to prime the surface first. In this case, the paint will lay down more evenly, and it will take much less.

Children's house in the yard

For children living in an apartment, the dacha may seem like a boring place. To make the process of getting used to it as quickly and invisibly as possible, take care of creating a playground and a cozy house with your favorite toys.

4 The floors will need to be lifted with wooden beams and floor slats - prolonged exposure of children in the shade on damp ground is unacceptable.

5 So that the tree does not quickly fall into disrepair, it is better to install the structure on bricks or concrete blocks. They are dug into the ground at the corners of the base on the bayonet of the shovel.

6 To obtain a solid structure, you need polycarbonate with a thickness of 8 mm or more.

7 They cut its sheets with a construction knife.

8 The protective film is removed after construction is completed. Otherwise, scratches may appear on the plastic.

9 Any arched structure can be made of polycarbonate - it bends easily, but only in length.

10 The strength of this plastic is ensured by the special structure of the sheets. They are made in the form of honeycombs (stiffeners). However, this also has its drawbacks - if it is not properly fastened, water can accumulate inside. To prevent polycarbonate from darkening with moisture and losing its attractiveness, cut the sheets so that the stiffeners are vertical. The ends of the sheets are closed with a special end profile to prevent moisture ingress.

11 To avoid exposure of the material to ultraviolet radiation, the sheets are attached with a protective layer outward. It always has inscriptions and pictograms.

12 If one sheet is not enough to close the wall, dig an additional support into the ground so that the joints of the sheets fall on its center.

13 In case of temperature extremes, the material is able to change dimensions, so you should not place the sheets close to each other. It is necessary to leave a small technological gap. When installing, use thermal washers to help compensate for expansion.

14 When drilling holes for fasteners, make them a couple of millimeters larger than the diameter of the screws. Do not twist them tightly, otherwise the plastic will crack during thermal expansion.

15 For the manufacture of a gable roof, you will need a ridge element made of the same plastic. You can buy it at a hardware store. You can also protect the ridge from moisture with a metal strip bent at the right angle.

Wooden structure

The height of such a structure depends on the height of the child. But children grow up quickly, so it's better to build with a margin.

1 The children's house made of wood does not require a foundation. To protect the wood from moisture, you can install it on a brick base. You can also use low wooden or metal piles. It will be possible to attach a slide to the porch of a house installed on such supports and raised above the ground.

2 The floor must be sufficiently strong and sound. Use better floorboard or plywood. They are attached to lag bars. The side facing the ground is impregnated with an antiseptic.

3 A thick timber 50x50 mm thick is mounted as a frame in the corners and at the location of windows and doors. To impart rigidity to the structure at the top and bottom, horizontal beams are attached.

4 The corners are reinforced with spacer bars - bevels, posts - with metal corners.

5 It is better to make a gable roof so that the child is not tempted to climb in there. First, pediments are prepared from the bars - end sides in the shape of a triangle. Between them are horizontally running bars, on which the lining is stuffed or plywood is attached.

6 To avoid splinters, the tree must be cleaned and sanded.

7 To provide ventilation, sufficient lighting and the convenience of observing children, several windows are made in it. They are located 50-60 cm from the floor.

8 The height of the door must be at least 20-30 cm higher than the height of the child.

9 Near the house you can equip swings, slides, set up a sports corner. For a girl, you can equip a small flower bed with flowers, which she can take care of herself.

10 Great if you organize the grand opening of the lodge with tea, holiday posters and music.

Covering light structures with heavy slate is unacceptable. Indeed, in the event of a collapse, the child may suffer. Use lighter polycarbonate, wood or plywood covered with soft tiles for the roof of the children's house.

Tree house

1 How to make a children's treehouse? To build such a structure is not as difficult as it seems at first glance. Of course, only a person who knows how to work with wood can create design structures. But here is the simplest structure, consisting of supporting pillars and a platform, in the center of which a cutout is made for a tree trunk, even for a novice carpenter. The tree on which the structure will be located should be strong enough, but not old, with strong branches. All dry branches must be removed.

2 The frame for the treehouse is made of well-sanded and primed timber. To prevent the tree from leading, it must be dried well. The section of the timber is from 5 cm. It is better to use pine - it is less susceptible to rotting.

3 The connection of the supports should be as strong as possible. You should not use the usual connection on self-tapping screws - it will quickly loosen.

4 in carpentry for these purposes a special type of overlapping "half-tree" joints is used. To do this, recesses are cut in wooden blocks with a hacksaw and a chisel. The parts are superimposed on each other and additionally bolted.

5 The wooden platform should be as stable as possible. It is made from a bar and leveled with plywood.

6 The roof is closed wooden slats, plywood or soft roofing.

7 It is necessary to make an extension ladder. To do this, you can nail several wooden blocks to the inclined board. It will be more convenient to climb such a ladder.

Pallet house

Wooden pallets (pallets) are an excellent building material. Since the strong boards in them are already knocked together, you can assemble the playhouse quickly enough. Although, if desired, pallets can be completely disassembled and only boards can be used in construction.

1 Be sure to pay attention to the markings. If the letters IPPC are printed on the pallets, it means that they have been treated with chemicals. The use of such products is highly discouraged. It is not necessary to build a children's house from painted pallets. Indeed, for their processing, formulations with formaldehyde content are often used. Better to paint the finished product yourself.

2 Several pallets need to be disassembled - we will use their thick crossbars to create the frame. To do this, remove all nails with a nail puller. You can simply saw off the crossbars from the side boards.

3 Each pallet must be sanded, otherwise children will quickly pick up splinters. To do this, you can use coarse sandpaper. It is inserted into the sandpaper holder (grater). You can also use a grinder or grinder for cleaning.

4 If the pallets are dirty, they are pre-washed with a stiff brush.

5 First, we collect the floor. For lag we use thick pallet crossbars knocked together. For flooring, you can take chipboard or boards from disassembled pallets.

6 In order for the pallet house, assembled by our own hands, to serve as long as possible, to protect it from moisture, we install it on a small elevation made of bricks buried in the ground at the corners of the structure.

7 Let's start assembling the frame. We attach vertical supports to the assembled base of the house - transverse pallet boards. We use metal corners and self-tapping screws for this.

Tent of willow branches

It is better to place a children's hut near the house so that the games take place in front of adults. Place it near a hedge or in the shade tall treesto protect the building from drafts.

For construction, any types of branches of sufficient thickness are used:

1 First you need to decide on the shape of the hut. Long branches can be arranged in a wigwam-style circle, fastened at the top and around the perimeter with strong twine.

2 A classic gable hut made of branches is made as follows. At the chosen place, two strong thick poles are hammered into the ground, the end of which is bifurcated in the upper part in the form of a spear.

4 A support rail is horizontally placed in the oarlocks of the spear and fastened with a rope.

5 It is better not to use the wire for fastening. You will need a lot of it, and it is unlikely that it will work out perfectly to bend all of its tips so that the child does not accidentally get hurt. Better to use polypropylene twine or thick cotton twine.

6 Thinner poles are laid on the supporting one at an angle of 45-60 degrees, first from one side of the hut and then from the other side. For strength, they are also fastened with twine.

7 Across the horizontal rods, you can tie vertical ones, thus forming a lattice.

8 Spruce branches (spruce branches) or hay are laid on top of the roof. To prevent rain from getting inside, the laying starts from the bottom so that the next layer covers the previous one.

9 To protect from the wind, stones are placed around the perimeter of the hut, which are covered with earth.

The process of building a child's dream from A to Z

How to make a children's house with your own hands: from wood and other materials. Dimensional Drawings | (80 Photo Ideas & Videos)

Children's house in the country with his own hands it has dimensions 160x160x140 cm and a ridge height of 90 cm.For him you will need:

• 4 foundation blocks;
• mounting angles;
• 11 floor slabs;
• floorboards 4 pcs.;
• lining;
• carved platbands;
• furniture board;
• paint;
• ondulin;
• 5 roof bars;
• edged board;
• beam holders 6 pcs.;
• nails, screws.

Step 1. Making the floor frame

First you need to mount the base and align it diagonally, as well as reinforce it with metal corners.

Step 2. Choosing an even meta

At the right place, 4 corner points are marked with a frame, which will serve as a place for the foundation blocks.

Step 3. Making the house stable

The frame is laid on 4 foundation blocks, which are pre-installed at a depth of 1 shovel bayonet at the level of the sand bed. It is necessary to lay a waterproofing layer between the foundation and the frame.

Step 4. Creating the floor

It is necessary to sew up the whole frame with the help of boards to get a flat floor.

Step 5. Floor treatment

After making the floor, you need to process it from the inside, adjacent to the ground. After that, you should proceed with the installation of walls, windows and doors.

Children's house with their own hands. Step by step photo

Important! To prevent children from driving splinters and injuring themselves, jointing materials should be chosen, and also chamfers should be created at the corners.

Step 6. Creating rafters

First, the rafter template is marked on the working surface, then bait with temporary nails. Then the reinforcement is sewn in, and all the joints are reinforced with corners, and the nails are removed.

Step 7. Attaching the rafters

3 pieces of ready-made rafters must be placed on the frame and supported with an inclined support in order to set it up along a plumb line. And then attach the rafters to the wall frame using metal holders.

Step 8. Sheathing

The finished frame must be sheathed with clapboard.

Step 9. Roof

The roof is sheathed on both sides with a carved board starting from the ridge. The roof is covered with ondulin, which is very convenient to cut with a grinder with a cutting disc.

Do-it-yourself children's house made of wood. A photo

To make the house look elegant, the ends and openings of windows and doors can be decorated carved platbands, and the corners of the house are smooth curly corners.

Step 11. Interior setting

It is necessary to refine the house from the inside by installing, for example, a table and benches for children there. The children's house is ready with your own hands, it remains only to paint it.

House on poles for children

You can build a house for games in your local area. It is not difficult to build a children's playhouse with your own hands. For example, you can build a children's house on poles with your own hands.

Nursery construction guide playhouse do it yourself

It makes no sense to build a capital foundation for such a structure. Instead, you can put wooden bar section 100x100 mm. You can connect the elements together with steel corners.

Next, you need to install supports for the upper floor of the structure. For these purposes, you will need boards with a section of 80x30 mm. In order to connect them, you can take jumpers, on which the boards of the second floor will be laid.

After that, wooden supports are mounted, which will be the basis for the stairs. You should also install wooden floors.

Advice: in order for the overlap of the second floor to withstand a heavy load, it is necessary to install wooden boards with the edges down.

It is better to install the supports of the house on the paving slabs.

For safety, it is necessary to install balusters with railings on the stairs.

Supports from above are fastened to each other. It is recommended to use jumpers to fix the wall frame.

a house for children on poles. Step by step instructions

You can use plywood for roof cladding, and boards for walls.

Any soft roofing material is suitable for roofing.

Also in the playhouse you can make a "black" exit. For these purposes, a hole is made in the floor into which a rope must be passed. Children will appreciate such an original way out of the orphanage.

At the final stage, they produce finishing work... For these purposes, you will need multi-colored paints, all kinds of decorative elements, etc.

house for children with their own hands. A photo

You can build a sandbox under the house.

House for children master class. Step-by-step instruction

A do-it-yourself children's house is made from the following materials:

• tongue-and-groove board for the floor;
• bar 45 x45 cm for the frame;
• metal mounting angles;
• "Block house" for facing;
• edged board (inch);
• bituminous tiles;
• Biotex;
• nails;
• wooden corners.

The first step is to create drawing children's house with their own hands. It will have a veranda and 1 room with windows and a door.

It is necessary to start building a house with grounds, which will serve as a floor. The tongue-and-groove board is connected with nails and fastening a tenon-groove to three logs.

Then created carcass the future house made of bars, which are fixed with metal corners.

Next stage - facing... For this “Block House” was chosen - a material that looks like a wooden frame. Moreover, it is quite tough.

Important! In order not to damage the tongue when joining the Block House, it is better to use material trimmings and a hammer.

You need to clad the house, taking into account the side windows and doors.

The outer corners of the children's playhouse with their own hands are closed with wooden corners.

Roof covered with edged boards, which are fastened on each side with two nails. The flooring is made of shingles.

A ready-made children's house made of wood is processed by hand " biotex», Which will protect it from the sun and rain, as well as give desired color... The color of pine was chosen for the house from the master class.

Benches, a table and shelves are being built inside the house.

The idea of \u200b\u200ba children's house with their own hands has been brought to life. It remains only to present such a gift to children.

Master class of a play house in the country

Children's house with their own hands. A photo

For a children's house made of wood with your own hands you will need:

• 6 wooden boards measuring 1.8x2.4 m,
• bars with different sections;
• roofing material;
• stain;
• screws;
• thin boards.

Step 1.

If possible, it is necessary to lay crushed stone foundation. Alternative option - level the soil surface. Bars with a section of 10 * 10 are sawn into pieces of the same length and positioned so that the distance between the posts is about 1.4-1.5 meters.

Step 2.

The support beams should be placed in the ground under the uprights so that the floor does not rot in the future. Bars with a cross section of 5 * 10 cm are located between the posts of the panel that will serve as the floor. With the help of screws, it is necessary to fasten all the bars to each other. Free space between the lags you need to fill it with soil.

DIY construction of a children's house. A photo

Step 3.

Wooden panels are cut and laid flat in a horizontal position. They need to be fastened together with a bar.

Important! To make the flooring uniform, you need to lay the panels with a margin, and then saw off the excess.

Step 4.

Next stage - side panels. It is necessary to make markings with the help of skipping, while leaving a margin of about 6 cm in width on each side. The height of the walls can be 1.5 m.

Slots for windows and doors are immediately made according to preliminary markings. In this house, the door size is 1.2 * 0.6 m.

Between each other, you need to knock down the parts, cover with stain and proceed to the next step - assembly.

Step 5. Panels inside and outside can be opened varnish... The deck is securely fixed. After that, the walls are attached to it with screws. On the side, a board with a section of 5 * 10 cm with a protrusion beyond the edge is fixed.

Step 6.The evenness of each wall after installation in position must be checked by the level, after which the rest are attached.

Step 7. Next, you need to install the roof and cover itroofing material... Use a wide skate to close the gaps between the panels.

Step 8. To make the house look more interesting, you can create a porch for it, and make shutters on the windows.

Step 9. A children's house in the country with their own hands, which will last for many years, is ready.

Children's house above the ground with a slide and stairs master class

The original idea of \u200b\u200ba do-it-yourself children's house - on a dais. To construct it you will need:

• chipboard plates;
• wooden blocks for piles;
• slide;
• stairs;
• nails and screws;
• cement and sand for the foundation;
• paint.

The collection of the house will be carried out according to the principlethorn groove, which will make it possible to disassemble the structure if desired, for example, for the winter.

1. The frame is assembled as in the photo. If on window opening shutters are planned, then hinged hinges should be purchased in advance.

2. A blank is made for the hatch cover.

3. The railing for the porch is being made. For this, holes are drilled in the bars at the same distance, having a depth of half the thickness of the bar.

4. Finished strips must be fitted into the drilled slots.

5. After matching, the slats must be removed and temporarily fixed for ease of painting with nails.

6. An important stage - bookmark foundation... 4 holes 1 meter deep are pulled out under massive piles. Will be needed for them metal mounts... The supports are poured with cement and left to solidify.

Important! The deeper the piles are buried, the less likely the house is to move or collapse.

7. Frame is built of 4 main ribs and two side ribs, which will be necessary to support the roof.

8. After the construction of the frame, the floor is sheathed with boards.

Do-it-yourself children's house above the ground. A photo

9. Following the floor, the walls are sheathed.

10. Roof option - pavement, which is covered with polycarbonate, which is attached to the stiffeners.

11. The window with sashes and the door are secured in place.

12. Pre-made fences are installed.

13. The hatch cover is mounted using a chipboard sheet and door hinges.

14. The finished slide is attached to the house.

15. Stairs you can make it yourself or attach a ready-made one that will lead to the hatch.

Step-by-step instructions on how to make a children's house out of wood. A photo

16. Construction of the house is now completed.

Small houses for children. Photo with description

1. Children's house on a dais with closing curtains looks original and functional. You can stay in it and play in the fresh air, or you can hide the room from prying eyes. A massive tree, as the basis of a house for children, will be reliable and will last a long time.

2. Natural decorative elements can easily turn a children's house into a full-fledged home. Glass windows and doors will add comfort and allow parents to look at their child at any time. Bright decorations will create a sense of celebration. But the creation of such a house should be approached seriously and thoroughly.

3. Such a massive stable house will definitely please a child. It is equipped with all the fun you can think of for children. First of all, it is a spacious room, which, in addition to the usual exit, has another one equipped with a slide. A staircase was built to enter the house, which is also very fond of fidgets. Well, for younger children there is a sandbox right under the house.

4. A cute pink house will be immediately appreciated by girls. Uncomplicated design, high-quality wood, pink paint - and the children's house is ready. True, this will have to work hard - insert windows, a door, organize a veranda, hang flowers.

6. Panel house blue in landscape design will look very bright. Large glass inserts add originality to it. A spacious porch, unusual decorations and a path made of stones will complement such a house.

I made a house for my daughter as a gift for her 6th birthday. My wife and I took part in the design, the same + my mother took part in the painting.

So let's start as usual with a drawing, I have it clumsy and with approximate dimensions.

Gradually collect for clarity and come up with how it will look next.

The stairs were too long, jamb. But fortunately, I assembled it into screws, 1 pc per step, so look further:

Since the wife always occupies the main place in design, the "general" decision was made from below pull-out drawers... Milling the facade:

And this is how they look after grinding. A little work and grade 4 plywood turns into 1st grade plywood, though only in places)

We disassemble, grind, glue, paint, assemble.

I was convinced that a back wall is needed. Well now I agree she was definitely needed. A couple of rooms even had wallpaper.

Well, the final result. True, here the stairs to the attic are almost invisible, and it turns out that I did not place the boxes correctly. But with color spiral staircase the wife admitted that she was mistaken, of course it is possible to repaint, but it is unlikely, my daughter already likes everything, and I am an extremely lazy type.

And here is a photo for the morning when the gift was presented. We had to take some work to drag him to the balcony in the evening before his birthday so that the daughter would not notice. The house was quickly settled, the boxes fell into place and even the green staircase is no longer so prominent.