How to make a sofa with your own hands. How to make a sofa with your own hands: step by step instructions. Corner sofas in the interior

Everyone knows that upholstered furniture is essential in every home. But there are people who cannot find a high-quality option for themselves from the store and decide to start making them on their own. The most basic step to this work is that you yourself will accurately make a model of the size that your living space allows.

Many people wonder what is a modular sofa? It is not difficult to answer, because this is a standard and known to all of us corner sofa in its various representations. It would seem that it would be very difficult to assemble it yourself. But do not despair, even a beginner can cope with the task, the main thing is to have a desire.

Possible to create original design

It should be noted that a self-made sofa immediately eliminates such disadvantages as:

• inappropriate size;
• irregular forms of the structure;
• color design and decoration inharmonious to the interior.

You can create semicircular sofas or with an acute angle, it all depends on your imagination. It is important that as a result you will get an original model, which will be no worse than the store version, but at the same time it will cost several times cheaper.

Preparation for work

Before you get started and prepare all the necessary material, you need to prepare detailed drawings and diagrams. This stage will help to avoid mistakes in work, moreover, you will be able to correctly purchase everything necessary materialsavoiding unnecessary costs. The dimensions can be taken on the Internet, but later change them to suit the characteristics of your room.

1 2 3

Then, the following materials for work should be purchased from the hardware store:

• plywood bars, chipboard;
• furniture legs and lifting mechanisms;
• foam rubber, synthetic winterizer, pillow filler;
• upholstery for furniture;
• jigsaw, drill, screwdriver;
• construction stapler with staples;
• screws and nails;
• joiner's glue and PVA glue.

In order for a do-it-yourself modular sofa to turn out no worse than the store version, you need to cut out beautiful armrests. If you have no experience in carpentry, then you should order a clipping from a professional who will make perfectly flat models according to the drawings.

Assembling the frame of the sofa

First you need to assemble the armrests. It would seem that they are the smallest details, but they are the ones that require close attention when assembling. Since they should turn out to be perfectly flat and symmetrical, you must strictly follow the instructions. Experts put a special block between the sides of the armrest, which controls their size. All parts are connected using self-tapping screws and a screwdriver.

Next, you should assemble the frame of the sofa. You need to start with two bars of the same distance and thickness and connect them to each other with longitudinal bars. You need to connect with high quality and firmly so that in the future the sofa does not loosen up and you do not have to repeat the procedure. Next, you should attach to the base of the boards, on which the back of the product will hold.

Fabrication of the frame Closing the oriented strand board Closing the top plate

For additional reinforcement, you can use wood glue.

After the actions taken, the resulting structure is upholstered with plywood sheets, forming a uniform box in which later you can store personal belongings or bedding... As soon as the frame is ready, immediately screw the legs to the product, otherwise it will be much more difficult to do this later.

Assembling the rest of the parts

The backrest for the sofa is also assembled separately from the frame, in full accordance with the drawings.

The backrest is attached almost at the end

The retractable part is being assembled, but at the moment it remains aside, since it has not yet been sheathed with material and a soft layer. Fasten everything to self-tapping screws, and then connect to each other in the following order:

• back to the frame;
• armrests;
• retractable part.

Sheathing and decoration

How to make a sofa soft and comfortable? It's much easier than assembling the frame and putting each piece together. Decorating, as the final stage, brings more positive emotions, since in fact the result becomes visible. At the same time, this stage is very important, because how carefully you finish the work will depend appearance new DIY furniture.

It is better to start with the armrests, since it is they who have to be aligned and given exquisite curves. The foam pads do an excellent job of making the armrests very comfortable and soft. We cover the seat with the same foam rubber. It should be carefully fixed with glue, otherwise it will walk during the use of the sofa for its intended purpose. When all the soft parts are wrapped in foam rubber, you can start covering the furniture with fabric upholstery.

The original design of the sofa armrests

You should choose a fabric that can serve you for a long time without unexpected damage. Also, be sure to consider how often you need to clean your sofa. If there are small children or pets in the home, the furniture should be upholstered with breathable fabrics that can easily get rid of dirt. Well, do not forget about the interior of the room for which the furniture is made. The upholstery must match it in order to create additional comfort.

The sofa is the heart of the home. It serves as an element of interior decor, helps to relax after a hard day's work. A sofa is not just a piece of furniture. It will certainly become the hallmark of the house and the center of attention of your guests.

In this article, you will learn how to make a sofa with your own hands no worse, and maybe even better than those sold in furniture stores. You will see what elements the sofa consists of and what materials are most often used in the manufacturing process.

Do not forget that homemade furniture saves the lion's share of the family budget. If you decide, for example, to make a sofa yourself, its cost will be two, or even five times lower than the market price!

However, it depends on the selected materials and the specific design taken. Folding sofa will cost more, but if this is your first product, opt for the project described in this article - it is perfect for those who set out to learn how to make upholstered furniture.

Make a sofa with your own hands - and you will see by your own example that there is nothing complicated about it!

So let's get started.

To work you need the following materials and tools:

1. Tools:
- jigsaw. If you do not have a jigsaw, it doesn’t matter: use a hacksaw for wood, especially since it will come in handy for you in the process of sawing bars;
- pneumatic furniture stapler. If you intend to make only one product, use a mechanical stapler - it will cost less;
- screwdriver;
- grinder or plane for grinding sharp corners of the frame;
- staple remover or sharp screwdriver;
- a sharp knife for cutting foam rubber;
- scissors;
- sewing machine for sewing sofa upholstery elements;
- roulette.

2. Materials:
- bars with a cross section of 40-50 mm;
- plywood or any other available, durable and as lightweight sheet material as possible;
- furniture foam rubber, 50 mm thick. Foam rubber, like many other materials, you can purchase in a specialized online store "everything for furniture";
- synthetic winterizer or batting for additional softness of the frame and the product as a whole;
- furniture fabric;
- joiner's glue;
- strong thread for stitching upholstery details;
- self-tapping screws or furniture screws (when using the latter, you will need an electric drill);
- marker or pencil.

Let's get to work.

1. Frame
The base of our sofa is a frame. It can be of any shape and size, but this article describes the simplest project that can be made by a person inexperienced in production upholstered furniture.

The basis of the frame is made up of wooden bars and slats with a cross section of 40-50 mm or any other size that ensures the strength of the finished product.

Additional rigidity to the frame is given sheet materialswith which it is sheathed - plywood, OSB, chipboard, fiberboard, etc. The inside of the frame is hollow, which makes it relatively lightweight.

At home, the sofa frame is assembled using a screwdriver and self-tapping screws. The holes for the screws can be pre-drilled with a drill, and the screws themselves can be lubricated with wood glue when drilling.

Also, glue is often used at the junction of wooden parts before they are connected with self-tapping screws. In this case, they are pressed against each other for some time with clamps.

In addition, when assembling the frame, it is convenient to use all kinds of angular and curved metal fasteners.

The length of our sofa is 3 meters. It is roomy enough and consists of two equal parts - 1.5 m each. In the photo below you can see one of them - the left side of the sofa.

2. Frame and mattress
The frame of the future mattress - the base of our sofa - is made of board. For greater comfort, the cover is made of furniture belts.

It is not difficult to make it: first, the belts are fixed with a stapler horizontally, then you should make a binding and fix the belts perpendicularly - vertically.

The photo shows what we should get in the end. These are two parts of the mattress.

3. Backrest
The photo below shows the frame of the back of our sofa, sheathed with plywood. Please note that the frame itself is made of wooden blocks, and metal connectors are used to fasten the parts.

The back is hollow and lightweight, comfortable to work with. The shape in this case is as simple as possible - rectangular in profile. Without much effort, you can make it sloping by increasing the width at the base and reducing the width of the frame at the top.

4. Side parts
By analogy with the back, we also make the side parts of the frame. It should be noted that the protruding bars that are visible in the photo in the future will serve as the basis for the foam rubber. But more on that later.

5. Pasting with foam mats
After assembling the frame, we proceed to mounting the foam rubber.

Pieces of foam rubber of the required size and shape are pasted over the top and front of the back, as well as the inner surfaces of the side elements. We put the foam rubber on the mattress over the binding.

The adhesive can be applied with a wide brush or used as an aerosol. Immediately after applying a layer of glue, press the foam rubber to the surface and leave it for some time (usually no more than half an hour) before setting.

6. Sintepon (batting)
In order to hide irregularities, smooth out sharp transitions and add volume, the back, side parts and, if desired, the mattress is wrapped with padding polyester or batting.

Before proceeding to this stage, it is necessary to grind all sharp corners of the frame so that the upholstery does not fray and lasts as long as possible. This operation is carried out using a grinder, planer or just coarse sandpaper.

7. Fabric upholstery.
Covers are usually sewn according to ready-made patterns and patterns. If there are none, you can make them yourself by applying and trying on fabric to each of the elements of the sofa, be it a backrest or a pillow. Some of them can be zipped for easy cleaning and washing.

The covers can be cut strictly according to the shape, or they can be gathered and tacked with a stapler in those places where the design allows.

In extreme cases, the sewing of covers can be entrusted to specialists from the atelier. Their design is very simple and inexpensive.

In order to make furniture, you need to create a drawing; it will also be impossible to make a sofa without this stage. It is not worth buying expensive materials for sofas, including a bar with a large section or laminated plates. It is not recommended to equip complex spike joints, since only a professional carpenter is capable of making them. You should not use nails as fasteners, since such connections will loosen pretty soon and the sofa will begin to creak. Self-tapping screws will be the best solution. Additionally, you need to apply glue.

Making a corner sofa

In order to make a corner sofa structure, you need to stock up on the following materials and tools:

Figure 1. Schematic drawing of a sofa, the dimensions of which can be adjusted depending on the dimensions of the living room.

• pine timber 30x50 mm;
• 5 and 15 mm plywood;
• lifting mechanism;
• 3 mm fiberboard;
• 16 mm chipboard;
• legs in the amount of 9 pcs.;
• 20 and 40 mm foam rubber;
• upholstery fabric;
• holofiber;
• synthetic winterizer;
• batting,
• hacksaw;
• miter box;
• stapler;
• drill;
• self-tapping screws;
• screwdriver.

Figure 2. Drawing of the sofa with measurements.

In fig. 1 is shown schematically, the dimensions of which can be adjusted depending on the dimensions of the living room. Work must begin with the unfolding of elements, including: frame, backrest, armrests, seat. The assembly must be carried out in this sequence. The armrests must be the same, and they are assembled using self-tapping screws.

You can tackle the frame of the left side by preparing two sidewalls, to which the longitudinal bars are reinforced, and then the racks. The latter should be reinforced with transverse ties. Now you can start installing the left side seat. It is necessary to install the seat frame. As soon as the frame is installed in the frame, plywood must be reinforced from above. After that, you can fix the fiberboard to the back of the left side. In the next step, you can proceed to the installation of the right side.

Back to the table of contents

Folding product for Japanese futon

To make a sofa, the frame of which can be sheathed or refined with Japanese futons, you should use pine furniture boards.

The main modules, seat and backrest have frames, which are assembled by joining two side walls in front and back using planks. To the elements that are located along, it will be necessary to strengthen the base under the mattress, which includes transverse slats.

Figure 3. Dimensions of workpieces that must be prepared before starting work.

In fig. 2 you can see the construction drawings with dimensions. And fig. 3 contains the dimensions of the blanks that must be prepared before starting work.

Using a drawing and a circular saw, you need to cut the material. It is recommended to process the corners with a jigsaw, smoothing the edges with fine-grained sandpaper. Before starting the installation, the elements must be covered with acrylic varnish, and then leave them for a while to dry. The side parts of the seat must be connected together with longitudinal boards, using 2 dowels set on glue. Furniture screed will give the structure additional rigidity. This same technology should be used to assemble the back of the sofa.

Pivot joints must be equipped with bolts and hex nuts. Bars 30x30 mm must be fixed to the longitudinal elements of the back and seat with screws and glue.

In the holes of the longitudinal boards with a diameter of 10 mm, you need to install bushings that are borrowed from furniture sets. M5x80 screws should be installed in them. You can mate the pivot joints of the legs with 80 mm screws. The strips need to be fixed with a belt tape, for which you need to press the piece that will act as a stop with clamps to the workbench.

The seat and backrest frames must be bolted together. In order to get a strong connection of the back sidewalls, you need to glue the bars and press them with clamps until they dry completely. The crossbars are mounted on screws, which must be fastened one at a time on both sides.

With the help of an independently prepared drawing, you can make any sofa, but it is better to entrust the cutting to professionals in their field.

A beautiful sofa serves as the main design element of any room. This is not just a piece of furniture, but also a visiting card of the whole house, to which the attention of visiting guests is usually riveted. In specialized stores, such furniture is usually quite expensive. If you make a sofa with your own hands, it will cost much less. Making it at home is not at all difficult.

In our time, pieces of furniture that combine unusual design, style and functionality.

Using a simple project, even a person who has never worked in the production of upholstered furniture can make a quality product. If in a modern apartment such a sofa will not look very respectable, then in country house or at the dacha, it will perfectly fit into the local interior.

One example is a pallet sofa with drawers..

The main components of the product are:

• frame;
• back;
• side parts;
• fabric sheathing.

Such furniture can be made independently from scrap materials, giving it the look that you will like.

The frame can be of any shape and size. For its manufacture are used wooden slats and bars. To give the structure more rigidity, sheets of plywood or chipboard are used. The assembly is carried out using a screwdriver. All joints are first greased with wood glue, then wooden parts pulled together with self-tapping screws. In addition, it is desirable to secure the joints with corner metal fasteners.

A beautiful sofa serves as the main design element of any room.

The frame for the mattress is made of planks. To give the product more comfort, the support area of \u200b\u200bthe frame can be made of interwoven furniture straps. First, the belts are fastened vertically to the frame, then a horizontal binding is made perpendicularly. Despite the fact that this sofa does not use traditional steel spirals, it will have excellent springiness. Therefore, it will always be pleasant to lie on it.

The corner bed looks more prestigious than the usual folding option.

The back is usually hollow inside. It can be shaped like a rectangular or sloping one. For this, the end width at the base increases and decreases at the top. The side parts are made in the same way as the back. The top and front side of the back are covered with foam mats. Foam rubber is also glued to the inner sides of the side parts. The glue should be applied with a wide brush in an even layer. Until the glue fully sets, the foam sheets should be tightly pressed against the surface to be glued.

Self-production of home goods makes it possible to create an original design that fits perfectly into the interior of a particular room.

Fabric upholstery is carried out according to prepared patterns or patterns. If you don't have them, it's easy to make them yourself. To do this, the fabric is tried on to each element of the sofa, after which the necessary cuts are made. After covering all the constituent parts with matter, final assembly. Simple construction such furniture is usually completed in three days.

Furniture panels are most often used to make a rounded sofa. They are made from wood or thick plywood. This material enables the round structure to cope with the required load. To fix the upholstery in the dimensions of individual parts, a certain margin must be present. It is advisable to make the lower soft parts under the skin multi-layered. Thanks to this, the sitting will be much softer and more comfortable.

You should start making a sofa-book by creating individual frame elements of the entire structure.

How is a sofa book made

You should start making a sofa-book by creating individual frame elements of the entire structure. This includes sidewalls, backrest, seat, linen box. First, a linen compartment is made of boards. This frame is reinforced in the corners with short pieces of beams, and supplemented with slats from below. For the back and seat, bars are also used, which are connected with self-tapping screws or special nails with a notch.

When making a sofa, the following tool is used:

• hacksaw for wood;
• screwdriver;
• plane;
• a hammer;
• scissors.

For the back and seat, bars are also used, which are connected with self-tapping screws or special nails with a notch.

Wooden slats are screwed to the resulting frames. They should act as a support for the mattress. After all the frames are ready, assembly is performed. However, special mechanisms are needed here. You can buy them at the construction market or in a store. During the installation of the mechanisms, a gap of about one centimeter must be left between the folded parts.

The comfort and convenience of sitting on the sofa will depend on the quality of this element.

In this case, the sofa should be unfolded. Due to the presence of a gap, it will fold and unfold freely. Before laying the foam rubber, on top of the lamellas, you first need to glue the non-woven material. This will allow the areas of the foam sheets between the lamellas to not fall through. The surface will always remain flat. To prevent the sheets from interfering with the operation of the folding mechanisms, the corners near these parts are cut off.

However, special mechanisms are needed here.

A soft roller is usually made at the edge of the seat. For this, an additional foam strip is glued on top of the continuous layer. The bottom edge of the strip is folded under the seat and is also glued. The armrests are softened in the same way. A similar procedure is performed with the backrest. When the glue under the foam is completely dry, the covers sewn to the size of the furniture are put on.

Making a corner sofa

First, the lower part is made, that is, the seat. The boards to be joined are fastened with self-tapping screws and corner plates. Chipboard sheets are screwed to the resulting box from below. A separate frame is made for support. The support part is also covered with plywood. You can stretch dense fabric from behind. Product dimensions are associated with the parameters and shape of the mattress.

During the installation of the mechanisms, a gap of about one centimeter must be left between the folded parts.

The stages of manufacturing an additional structure are similar. To connect the individual parts, an angular structure is made. It is usually made from the same material as the main elements. During the manufacture of this structure, the angle of rotation should be taken into account. The back and supporting parts are pasted over with batting. The back side is covered with a thick cotton fabric.

Family members spend a lot of time on it.

Legs are usually made from square pieces of timber. For attachment to the lower frame, holes are drilled in the bars. After that, they are applied to the bottom of the frame and fastened with long screws. In the manufacture of such furniture, special attention should be paid to the design of the structure. If it is not done correctly, various deflections, deformations, and other similar flaws may appear in the future.

You can stretch dense fabric from behind.

The following materials are used for the manufacture of furniture:

• board;
• timber;
• foam rubber;
• furniture fabric;
• joiner's glue.

If in a furniture showroom you decide to buy some unusual bed, then it may not be affordable for you. Original products are very expensive. It will be much better to make a custom sofa bed with your own hands. Here you need beams, boards and plywood sheets of the appropriate thickness. The backrest is assembled from planks and pieces of timber. The front part of the assembled frame is best sheathed with chipboard sheets.

The stages of manufacturing an additional structure are similar.

They are strong enough, and in stores building materials are inexpensive. It is advisable to treat the assembled base with a stain or varnish. Thanks to this, it will last much longer. Foam sheets are used for the soft parts of the product. Fabric materials are attached to the frame with special nails with wide heads.

Unusual sofas

Often they are made from scrap material. Especially if the product is intended for a summer residence. The base and back of this furniture can be made from used door leaves. Parts are cleaned of old coating and dirt, and then processed with a grinder. Then they need to be painted or pasted over with veneer. One door leaf is mounted on wooden supports. The second flap is used as a backrest. It should be attached to the base at a convenient angle for you.

A cozy home always has beautiful upholstered furniture.

The mattress is cut from foam rubber. The piece of material should fit the size of the seat. The resulting blank is first covered with a dense fabric, then a beautiful fabric of good quality is put on top. In the manufacture of such furniture, special attention should be paid to the reliability of the frame base. It should easily withstand the load that will arise from several people sitting on the couch.

Often they are made from scrap material.

Nice and cozy lounge furniture can be made with drawers, which are convenient for storing bedding and clothes. Due to the high functionality of the design, there will be no need to additionally install a chest of drawers or wardrobe in the bedroom. This will preserve the living space and make the room more spacious.

The product includes the following components:

• back;
• seat;
• a pair of armrests;
• drawers.

It should easily withstand the stress that will arise from several people sitting on the couch.

Each part of the product is knocked down separately. The back is assembled from long slats. To ensure the required rigidity, the planks are reinforced with short transverse beams. To get a sloping back, the back bars should be longer and the front ones shorter. Chipboard sheets are installed on top of the resulting frame, which are then pasted over with foam rubber and sheathed with fabric.

A similar frame is mounted for the seat. Its only difference is that it does not have a beveled part. Armrests are attached to the sides. They should be fastened with long screws in several places. Drawers are made frameless. Chipboards are also used as a material. To make both drawers easy to pull out, special mechanisms are installed on the frame racks.

Nice and cozy lounge furniture can be made with drawers in which it is convenient to store bedding and clothes.

After all the parts are pasted over with foam rubber, a synthetic winterizer is placed on top of it. Further, to protect the soft material, the entire sofa is sheathed with sturdy fabric. The appearance of the furniture depends on the quality of the final cladding. If you want your product to look fashionable and respectable, you can use leather or a good leatherette. Now there are a large number of similar materials on the construction markets.

Use of scrap materials

Of simple elements you can make furniture that will easily fit into any interior. If the structure consists of natural wood, the product will regularly serve for more than one year. Worn covers or fabric covering can be easily replaced if necessary. Today, those pieces of furniture that have an unusual design and style are popular. By making a product from scrap materials, you can give it the most unexpected exclusive look.

Each part of the product is knocked down separately.

Self-production of home goods makes it possible to create an original design that fits perfectly into the interior of a particular room. If your own product turned out to be fashionable, reliable and beautiful, you can be proud of it, brag to your friends. Anyone who knows how to use carpentry tools and has patience can create their own furniture sets. To create an original furniture masterpiece, you just need to turn on your imagination, show a little perseverance and hard work.

Chipboard sheets are installed on top of the resulting frame, which are then pasted over with foam rubber and sheathed with fabric.

A cozy home always has beautiful upholstered furniture. The dominant place is usually occupied by a luxurious sofa. Family members spend a lot of time on it. Here they play with children, sleep, arrange gatherings with close friends. Before making your own sofa, you need to understand well what type of sofa will best meet the needs of all family members.

The most popular products are:

• corner;
• book;
• dolphin;
• with folding mechanisms.

A similar frame is mounted for the seat

This also includes the ottoman. Such a product is extremely simple. It does not have any folding mechanisms. Therefore, making an ottoman with your own hands is not difficult. It is advisable to choose a future bed taking into account the place where it will be installed. Before starting work, you should take the necessary measurements, make preliminary drawings.

Carpentry rules

The corner bed looks more prestigious than the usual folding option. If you are doing this work for the first time, it is better to make the simplest craft that does not have any additional shelves and boxes. When assembling the frame, do not try to make spike joints at the ends of the boards. This work is done only by professional carpenters. Individual elements it is not advisable to fasten with nails. As the assembly is constantly loosened, over time the nails begin to loosen their hold. Better to use self-tapping screws or screws.

Now there are a large number of similar materials on the construction markets.

From natural wood, conifers should be preferred. Their fibrous structure is saturated with resin, which protects the tree from decay processes. Thanks to this, pine products have a sufficiently long service life. Before starting the assembly, the finished elements must be carefully sanded. This will provide the necessary safety during further work. It is advisable to cut materials outdoors, as this produces a large amount of wood dust.

Simple elements can be used to make furniture that will easily fit into any interior.

The frame is the main part. All other parts are attached to it. When assembling the seat, you need to check the box for the coincidence of the dimensions of the diagonals. The correct shape of the box ensures the stability of the entire frame. Before gluing the soft casing, check all connections. If a joint is loose, it should be reinforced with additional screws or metal corners.

M sex, especially soft, not cheap pleasure. And not always in the store there are models that are suitable in size or design. In addition, if you, for example, want to furnish country house, where there is no need for special delights, it is simply not a business to spend a lot of money.

The way out is to master the basics of furniture business and make the desired item yourself. At the same time, you will receive quite tangible benefits:

• Having saved on the purchase of furniture.
• By saving on furniture repair costs. If you learn to make new furniture, repairs will not be difficult.
• Finally - win a bet by betting that you can make upholstered furniture yourself, literally "on your knee"!

The base of upholstered furniture is a pillow

Soft elements modern furniture sometimes they represent complex multi-layer structures made of fabric, nets and springs. Making such a mattress or sitting on your own is a little real task.

However, quite comfortable pillows for a sofa or chair are easy to make yourself from a thick foam rubber plate.

In addition to foam rubber, we need two types of fabric and a zipper lock. We use natural fabric or with a minimal addition of synthetic fibers to avoid harmful electrification.

First we sew an inner cover, leaving one of the ends open. Any non-dyed dense fabric such as coarse calico is suitable for him. We put a cover on the pillow, turn it up and sew up the open side with large stitches. The cover should fit snugly around the foam, protecting it from wear and tear.

Now we sew an outer cover... It gives our pillow an attractive look and protects it from dirt. To be able to remove the cover from the pillow, we sew a "zipper" on the side. When cutting the dimensions, we make a little more than necessary, taking into account the possible shrinkage of the fabric during washing.

Laying several of these pillows on a simple frame or even just on the floor, we get a soft bed, ottoman or sofa.

Making a soft stool with your own hands

The soft part is based on a wooden base. Let's study the basic operations for its manufacture, using the example of a stool with a soft seat. Despite its simplicity, its assembly uses the same principles and techniques as for the manufacture of much more complex types of furniture.

Of the tools you will need:

• a hacksaw for wood with a fine (1.5-2 mm) tooth;
• curly screwdriver (cross);
• a hammer;
• awl;
• tailor scissors;
• needle with thread;
• a sharp knife (a mounting knife with a replaceable retractable blade is suitable);
• pliers;
• drill or brace.

We put a soft pad on the seat, pull the cover, wind its edges under the seat and shoot with staples.

The stool is ready. Now it is advisable to make thick rubber pads on the bottom edge of the legs. You can buy suitable fittings from a furniture store.

The very soft part can be framed along the edge of the seat with plastic edging tape or a cord, nailing it with decorative carnations.

Unleash your imagination, and according to this principle you can make the most bizarre and unusual furniture products.

Making more complex upholstered furniture with your own hands

Having mastered the basic operations of making upholstered furniture on the example of an ottoman, you can proceed to more complex products.