How to make a sink drawer yourself. How to choose or make with your own hands a comfortable kitchen sink cabinet. Exterior and interior design of the sink cabinet

The kitchen sink cabinet has become such a familiar element of the interior that it is often overlooked. Not only the appearance of the kitchen depends on it, but also its functionality as a whole. Such a cabinet can be purchased at any furniture and plumbing store, but it is much cheaper and more pleasant to assemble this kitchen element with your own hands, especially since it consists of a small number of parts and does not require skill.

The sink cabinet has become a familiar element of the kitchen interior.

Exterior and interior design of the sink cabinet

The main difference between the washing cabinet and other kitchen cabinets is the absence of internal shelves and drawers, since all the space is occupied by the sink and the communications connected to it. Some models of such cabinets are trying to be equipped with drawers, but the presence of a constant source of moisture does not allow storing many items in them, especially dishes and substances that are afraid of water.

Pull-out wardrobe

When making a cabinet with your own hands, it would be best to abandon the idea of \u200b\u200barranging the interior space with shelves or drawers, since they greatly complicate the design, and their practical value is very doubtful.

The standard sink cabinet consists of two side walls, a bottom, a rear wall, fronts and a worktop with a sink cutout. In the case of kitchen equipment, the countertop is not installed with a surface sink. Also, the back wall is often excluded from the composition of components for a kitchen sink, since it interferes with the normal connection of communications.

Construction and standard sizes cabinet

Standard cabinet dimensions are 85 cm high, 60 cm wide and 50 cm deep. Of all the parameters, it is recommended to change only the width, since only it does not affect the usability of the sink and depends primarily on the width of the sink.

The optimal sink height is considered to be 84-87 cm, since with such parameters, you can use the sink while washing dishes without bending over. Even small deviations from this height can cause discomfort and fatigue in people of average height.

Materials for the production of the sink cabinet

The kitchen is a constant source of high temperature and humidity. Therefore, all materials for production kitchen furniture must have increased moisture resistance. This requirement especially applies to cabinets for sinks, since the proximity of a water source quickly becomes unusable wooden surfacesthat do not have sufficient waterproofing.

Corner cabinet for a sink made of natural wood

Modern kitchen furniture is made from the following materials:

Chipboard (particle board). This is the traditional material from which most of the lower price range kitchens are made. The main disadvantage is that in the presence of even minor coating defects (scratches, cracks), the board quickly absorbs water and swells.
MDF - boards made of fine wood impregnated with a binder. Compared to chipboard, it retains moisture much better, but requires no less reliable protection.
Natural wood. Premium kitchen furniture and facades are made from it. After high-quality treatment with waterproof varnishes, such a material becomes hydrophobic, but prolonged exposure to high humidity in combination with high temperatures still negatively affects the properties of wood.

For the manufacture of most cabinets for sinks, chipboard or MDF is used, which is important to reliably protect against moisture penetration, especially in the places of cuts and holes. The main methods of protecting furniture boards:

Laminated chipboard wardrobe

Lamination is the most common type of chipboard and MDF coating. When exposed to high temperature and pressure, sheets for the production of furniture are covered with a special film, after which a protective varnish is applied.
Coating polymeric materials used mainly for protecting MDF boards. For this purpose, acrylic, plastic, enamel are used. All these materials allow not only to protect furniture from moisture and physical influences, but also give the kitchen a beautiful and bright look.

Making a cabinet for a sink with your own hands

Before you start making a cabinet for a sink, you should choose the material from which it will be made, determine the appearance and dimensions. Since cabinet fronts are not easy to manufacture, it is recommended to buy them separately and focus only on assembling the cabinet frame. This will give you the opportunity to make a product that will hardly differ in appearance and characteristics from store counterparts.

Sink cabinet assembly diagram

The whole process can be divided into several stages:

Purchase of materials. The main components that you will need: chipboard plates or MDF (16-18 mm thick) for the cabinet walls, a plate (22-25 mm thick) for the manufacture of countertops (in case the sink is mortise or undercounter).
Marking and cutting of materials. In the absence of the skills of sawing chipboard and MDF, it is best to entrust this responsible process to specialized firms that charge a relatively small fee for cutting and edging furniture boards.
Assembling the constituent elements. At this stage, you may need a standard instruction for assembling a cabinet for a sink, but there is nothing particularly complicated at this stage, since there are few constituent elements, almost all of them are different and have a clearly defined purpose.
Installation of a sink and connection of communications. At this stage, it is important to accurately determine the position of the drain neck and connect a siphon, a drain pipe to it, and if there is a washing machine or dishwasher in the kitchen, additional drains for them. Reliable waterproofing of all joints is also very important, which will prevent the washing cabinet from getting wet in the future.

Choosing and assembling a cabinet for a sink is a responsible process that will allow you to preserve the beautiful appearance of your kitchen for a long time and provide comfortable conditions for using this integral element of a kitchen set.

In the process of transforming your own kitchen, you need to pay maximum attention to the design of the place where the sink is located, because no apartment can do without this device and a private house... More stylish interior will help to make original and multifunctional furniture for the sink, because, in addition to its direct function, it can also serve as a place for storing detergents and other accessories. It is not at all necessary to buy it in a store for a solid amount of money - a do-it-yourself kitchen sink cabinet is quite simple to assemble. Today we will bring to your attention step by step instructions making such furniture that will help you avoid problems in the process of creating it.

Varieties of modern kitchen cabinets with a sink

Before making a cabinet for a sink with your own hands, it will not be superfluous to consider the possible variations, since such furniture today can have a variety of sizes, shapes, be made from both expensive and inexpensive materials... So, in order not to get confused, let's define the main criteria to which you need to pay attention.

Varieties of sink cabinets by type of design:

Direct. These are classic rectangular or square models that can be easily built into any work surface, except for corners. In addition, such furniture can be taken out on a separate island.

Important! It can have shelves for storing dishes, drawers and even serve as a place to place a built-in household appliances.

Corner. Such cabinets are adjacent to two walls of the room, located perpendicular to each other. They can be triangular, rectangular and L-shaped, take up a minimum of space, and are great for small rooms.

Important! Such cabinets have one big drawback - for comfortable use they must be equipped with additional devices in the form of carousels, brackets or drawers.

Trapezoidal. These are the most spacious cabinets with one or several doors, compartments, and they are equipped with a wide table top. They allow you to build in a large sink of any shape, and place many shelves inside.

As for the shapes of the sinks themselves, a lot depends on the preferences of the buyers. There are such models:

Oval.
Square.
Rectangular.
Round.
Asymmetrical.

Important! The most spacious are the rectangular sinks, in which you can wash not only huge pots, but also large baking sheets.

For additional convenience, sinks can be equipped with several compartments, grates, cutting boards, baskets, colanders, even food shredders.

Pedestal materials

For the manufacture of kitchen cabinets use chipboard, MDF, solid wood:

The most budgetary material is chipboard, which has a large selection color solutions... The big drawback of this material is the threat of the release of life-threatening formaldehyde resins.
MDF is the golden mean between quality and price. It is made from wood chips, paraffin, lignin. By its structure, it is denser than chipboard, does not evaporate harmful substances, we hold the mounts well.
The massif is expensive, it can dry out or swell when exposed to hot air. It looks, of course, impressive due to the unique structure of the tree, but it is difficult to care for it.

Shell materials

To make the whole set look organic in your kitchen and be convenient, you need to think about which material is better to choose the sink itself. Such variations are possible here.

Stainless steel

This is a classic material that has gained popularity due to its strength, durability and hygiene. You can choose a sink from it in an economy or premium class - it all depends on the quality of the seams and the thickness of the sheet.

It should be noted that such sinks are unstable to scratches, and corrosive spots are often formed on them.

Important! The water hits the metal hard, which can cause some discomfort, but this disadvantage can be compensated for by a thick or sound-absorbing lining.

Ceramics

Pedestals with ceramic sinks look incredibly beautiful and stylish, especially when they are placed near windows, because sun rays, shining from the glossy surface of sinks, give them a special elegance.

Most often, sinks are made of earthenware or porcelain. Such products do not need special care, it is enough to periodically clean them with ordinary ones. detergents and warm water. They are completely safe, resistant to high temperatures, can withstand huge loads, do not wash out over time, do not fade. But it is necessary to clarify that they are quite fragile.

Fake diamond

Most available materials in this category are acrylic and liquid stone... Such sinks are made to order together with countertops. But in order to save money, you can make a mortise or overhead structure.

Important! Sinks made of artificial stone often crack, dents from boiling water form on them, they change color after contact with chemical and food dyes.

Installation options for kitchen cabinets under the sink

Depending on the material of manufacture and configuration, a do-it-yourself sink cabinet and a sink can be installed in it in several ways.

Each option has its own characteristics, which include the following:

Overhead sinks. This is the classic way of positioning a straight cabinet and a collapsible table top. The lid is simply removed from the furniture, the place for the sink is fixed by the edges.

Important! This option is considered the best for self-assembly, even a beginner will cope with the installation and connection of communications.

Mortise sinks. This option involves preparing a hole in the countertop of the cabinet for installing the sink. To increase the level of tightness, all joints are sealed with a rubber seal, and the seams are treated with two-component glue.

Important! You can mount such a model with your own hands on a wooden tabletop.

Integrated sinks. They form a single unit with the table top due to a perfect fit and a snug fit. It is difficult to independently install such a bowl, since only a person with special skills can achieve a monolithic surface. That is why they are mainly made together with custom worktops.

Important! Monolithic models can vary greatly in installation price. Simple options hold on almost one glue, which is why they quickly break and gaps form on them. High-quality professional installation - maximum match.

How to make your own vanity unit?

We begin to make a cabinet for a sink with our own hands with the preparation of everyone necessary tools and materials, which include:

Thick glass.
Door hinges.
Furniture corners.
Putty.
Self-tapping screws.
Screws.
Primer.
Hacksaw or electric jigsaw.
Double-sided tape.
Hexagon.
Screwdrivers.
Sandpaper.
Putty knife.
Soft bristle brush.
Pencil or marker.
Glass cutter.
Sand.
Drill.
Roulette and ruler.
Grinding wheel.
Protective gloves.

Make a cabinet under the sink according to the scheme:

First of all, decide on the size of the furniture, while taking into account the parameters of the sink itself, the height at which you want to install it, the dimensions of the kitchen.
Based on the data obtained, prepare a drawing of the cabinet under the sink, be sure to indicate in it what it will consist of, the dimensions of the sink and the height of its installation.
Use a pencil to mark the chipboard.
Cut out all the details.
First of all, connect the bottom and walls with self-tapping screws. At the same time, make sure that the heads of the fasteners do not protrude too much, they should be slightly recessed into the chipboard.
Place the assembled cabinet against the wall, make sure that it stands level, does not stagger. To increase its rigidity, furniture corners should be used; it is better to place them using short self-tapping screws directly under the countertop.
To make the surface of the cabinet perfectly smooth, treat it with a putty with a putty knife. Let it dry for a while, then sand it with sandpaper.
Prime the entire surface of the product. This layer should be as thin as possible, then wait for it to dry.
Using a tint varnish and a brush, cover the structure in several layers.
Install the cabinet under the sink.
Make a glass door. First mark out the glass so that it takes the desired shape. Use sand to matte it. Just sprinkle it on the glass piece and moisten it slightly. Put another piece of glass on top and rub the sand.
Attach the finished door to the bedside table using hinges, adjust it.

The kitchen is an important element of home improvement. It carries an important functional load. It is here that food is prepared, the process of preparation and conservation takes place. Most often, it also houses a dining area for daily meals. Therefore, intelligently planned space optimizes all processes to a large extent. This is especially true for small kitchens... The furniture kitchen set is the main forming element of this system. A corner cabinet for a kitchen sink, which will be discussed later, will help to rationally distribute the work space.

Before considering the main types of corner kitchen cabinets, let's decide for what purposes the corner segment serves and what functions it performs.

The value and functional loads of the corner sink cabinet:

connecting - that is, thanks to this segment, the furniture set transitions from one wall to another;
technical - one of the important units is located in it, namely the sink and communications to it. This main purpose is to rationalize the used area. The corner sink is convenient in that it can be equidistant from the work table and hob... This makes food preparation very convenient. In addition, it can accommodate sinks of various configurations and sizes. Inside it, in addition to the drainage system of communications, there can be water filters, a flow heater, garbage containers, retractable storage systems, most often household chemicals;
aesthetic function - this element fits organically into the overall space.

Varieties

There are two types of corner sink for the kitchen: L-shaped with an acute angle, these sections are also called attachments, and a cabinet for the kitchen with a beveled corner. They differ in internal overall dimensions, the device, the number and way of opening the doors, ease of use.

Corner cabinet for the kitchen under the sink, main dimensions.

In kitchens made by individual orders, there may be slightly different dimensions.

L shaped

With beveled corners

Choice of size and shape

In order to make the right choice of a corner cabinet, you need to know their features, advantages and disadvantages. In the attached sections with an acute angle, the internal space is less than in the second type of pedestal. They can be equipped with two doors or one that opens two sections at once (accordion door). The convenience of the second option is that access to the far corner inside the section is simplified. The corner cabinet for the kitchen for a sink with a beveled corner is more spacious, since it has a larger volume. There is a possibility to install a sink bigger size... In addition, they are convenient from the point of view of use, as the beveled corner makes it easier to access the sink. The disadvantages include the fact that it has only one small door.

The problematic place of the corner sections under the sink is the countertop. The standard canvas has a size of 60 cm wide. In the case when a postforming, laminated tabletop is used, a seam falls on the corner segments. This point is not relevant for cast artificial stone countertops. Corner overhead sinks are sold, which fully correspond to the dimensions of the cabinet's working surface. Or purchase a special postforming 120 cm wide for this section.

What else needs to be considered when deciding on the choice of the corner segment:

kitchen area. Beveled section takes up more space;
you should immediately decide on the size and shape of the kitchen sink.

You don't have to buy it right away, but you need to select a model and download a technical drawing on the Internet. When you buy a curbstone, take it with you and show the drawing to the sales consultant. This will help avoid possible mistakes;

material used to make kitchens and countertops. Remember that laminated board is most prone to swelling from moisture. Therefore, it is desirable that the surface of the countertop be seamless;
general style and interior design;
decide whether additional elements will be located in the corner element: chopper, filters, flow heater. In this case, it is reasonable to give preference to the beveled segment.

Only by summing up all these points, you can make your choice.

Manufacturing materials

When deciding on a curbstone, you need to navigate the materials from which it is made. The main types of materials:

laminated board is an affordable option. It is, in fact, compressed glued wood chips covered with a layer of plastic. It should be noted that moisture must be avoided inside the slab. For these purposes, the ends, in the part where water can enter, are protected with an edge;
pedestals made of laminated board with MDF facades. MDF is wood waste crushed to a dispersed state, vacuum pressed under high pressure. from above the slab is covered with either a thin layer of a special film, or veneer (thin cut of wood), veneered facades. The board can be protected by painting. Painted MDF has a wide color range... Their advantage is also that they can be embossed. The facade does not require edge finishing. The most demanded and optimal, in terms of price-quality ratio, option;
natural wood - in the overwhelming majority of cases, only facades are made from it. Although wood is the most environmentally friendly material, it is also quite capricious. It must be well dried, expertly fitted and coated with special varnishes. These compounds protect it from moisture, temperature extremes, mechanical stress;
facades made of plastic and glass - they are quite beautiful and expressive. But expensive, like wood. They are framed with aluminum end tape. Susceptible to scratches, glass, chips and cracks;
cabinets made of food-grade metals. This is most often furniture for food production, where increased sanitary and hygienic requirements are imposed.

Washing plays an important role for ease of use.

Wooden

Variants for corner segments

There is a wide range of sinks on the market, including corner sinks.

What types can be used:

corner sinks - rectangular sinks are suitable for a curbstone with an acute angle. For the second type, with a beveled corner, the choice is wider, since the working surface is larger;
round sinks for 50, 60 cm, these are standard sizes. It should be remembered that a section with an acute internal corner is also suitable for sink 50;
direct washing - most often manufacturers produce them in lengths of 60 cm (600 mm) and 80 cm (800 mm). The depth depends on the type of sink (overhead or recessed) and the shape.

A corner floor stand for a sink, its choice, is directly related to the size and shape of the sink.

Oval

Rectangular

Filling

Do not forget to take into account the inner filling of the cabinet. If technical units are concentrated there (a chopper, a water filter, a flow heater), then it is reasonable to use a cabinet with a beveled corner, since it is more spacious. When you plan to use it for storage, then both options will work. You just need to decide on the dimensions of the stored items. The height of the shelves will depend on this.

In an attached segment with an acute angle, it is possible to use special pull-out baskets, swivel shelves, this is quite convenient.

If a garbage container is located in the corner segment, then when planning the internal space, it is better to know its size in advance. Then you can rationally accommodate additional shelves.

When deciding what the corner floor element for the sink will be, take into account the combination of the above factors. Best material for countertops fake diamond... Then a sink made of the same material is more suitable. If the work surface is covered with a laminated board countertop, then it is more correct to use overhead sinks.

A segment made entirely of laminated board is not much cheaper than a cabinet with an MDF facade. Therefore, from an aesthetic and practical point of view, the second option should be preferred.

The main thing for the safety of the cabinet is maximum protection against water ingress into the slab. To do this, all possible joints are sealed with a sealant, edges in contact with moisture are butted with a protective tape, and a furniture plinth is installed.

How to make yourself

If you have certain skills, you can independently assemble the corner segment. A laminated plate is the best option for a do-it-yourself kitchen, from which it is easiest to make it.

The sequence of actions is as follows:

determine the type of section. To do this, take into account the size of the room, and what will be located inside the segment;
check out the basic types of corner cabinet sinks. Both types are suitable for sink 50. Choose the best option and download the sink drawing;
think over and sketch a drawing of the pedestal with detailed dimensions;
with the drawing, contact the company that is engaged in cutting the laminated board to size. They will also tell you where to buy accessories and end tape;
when all the blanks are available, you can assemble the corner segment. To begin with, the sidewalls are mounted, they are attached to the bottom of the cabinet. Next, the connecting strips are installed and fixed. Then the legs are screwed on. Mark and cut out the recesses for the door fasteners. Install them, hang the doors. Depending on the type of sink, overhead or mortise, prepare the countertop in order to mount the sink. In order to make a hole in the tabletop, use a jigsaw. Pre-markings are made on the countertop according to the shape of the sink. The inset sink is installed only on sealant. It is important to follow the assembly sequence.

So, the floor corner segment for the sink is an important element of the kitchen furniture set. It carries a significant functional load. There are two main types of pedestals. Depending on a number of the above facts, choose one of them. An important element is the shape and dimensions of the sink and the internal filling. When choosing a material, interior design plays a major role.

We spend a lot of time in the kitchen when we are at home. Here we chat with family and friends, prepare delicious meals, just relax with a cup of delicious tea. That is why the interior and style of this room is given the most great importance... After all, the kitchen should be not only convenient and comfortable, but also beautiful. Besides quality repair and the most modern household appliances, one of the main details of the kitchen interior is furniture.

What if one of the elements of the headset, for example, a kitchen cabinet under the sink, has become unusable? But this particular piece of furniture is an important independent element and has specific design features... The cabinet under the sink in the kitchen is constantly exposed negative impact moisture and therefore breaks down most often. If this happens, then there are several options for solving the problem.

The first is to completely change the headset. But this is very expensive and not always advisable. The second option would be to purchase only a curbstone, but you may not be able to find exactly the same one, especially if the furniture was bought a long time ago. Another solution is to restore a broken cabinet or make a new one with your own hands. In order to do this, you need desire and the most basic skills. And also an understanding of some of the special features of this element of kitchen furniture.

Designs and types of sink cabinets

The simplest base cabinet option is an ordinary base cabinet without a back wall and often without a bottom, hollow inside. Thanks to this solution, it is very easy to connect communications to the sink, and it is also possible to choose a sink of almost any depth and shape. More difficult option equipped with special elements inside and allows efficient use of the space under the sink. There are two types of bedside table placement in the kitchen - linear and angular.

With linear placement, the cabinet and other floor elements of the headset are installed in the same plane. The cabinet itself under the sink has a rectangular shape and a standard width of 60 cm. But the length of the bedside table can be different. It depends on the dimensions of the sink itself.

There are two types of corner cabinet under the sink - trapezoidal and L-shaped. The most common is the second option. Due to the shortened length of one of the side parts, easy access to the inside of the cabinet is provided. Such models are more ergonomic and very laconically fit into almost any interior, especially in small kitchens. In such cabinets, it is better to install narrow doors with a maximum width of 30 cm.

The trapezoidal pedestal is a more complex design. Its frontal surface can be broken, rounded or linear. Due to the increased size of such cabinets, sinks can be installed in them different sizes and shapes, for example, consisting of several bowls. Inside these kitchen cabinets under the sink there is a large enough space where you can place not only a siphon, but also various systems for storage - pull-out, swivel or roll-out.

What is needed to make a cabinet for a sink

If you plan to make a cabinet for a kitchen sink with your own hands, then first of all you need to decide on its design, shape, size and material from which it will be made. Kitchen furniture is most often made from chipboard, MDF or solid wood natural wood... Wood, especially valuable species, looks very beautiful in finished products, makes the interior elegant and rich, but it is also quite expensive. Modern MDF and chipboard are of high quality and, which is very important for the sink cabinet, are impregnated with special moisture-resistant compounds. If you stop at one of these materials, then it is best to use laminated panels for the facade parts - they are of higher quality, beautiful and durable.

The dimensions of the cabinet depend on the area of \u200b\u200bthe entire room and the dimensions of other kitchen furniture, as well as the dimensions and shape of the sink. The design of a sink with a cabinet should correspond to the overall interior of the kitchen and other elements of the headset. And, of course, you need to choose the color of the panels identical to the rest of the furniture. Otherwise, the headset will look scattered. And this is not beautiful or stylish.

Stages of making a bedside table

After you have decided on the material, shape and size, you need to make a drawing according to which the cabinet will be assembled. And also purchase all necessary details and materials for its manufacture:

hinges for doors;
special corners;
self-tapping screws;
primer;
putty;
varnish for opening an already finished product;
sandpaper.

For the manufacture and installation of the kitchen sink cabinet with your own hand, you will need the following tools:

tape measure and ruler;
hacksaw;
screwdrivers;
hexagon;
putty knife;
brushes.

When everything is ready, you can get to work. First of all, we cut out the details of the future bedside table under the sink in the kitchen according to the drawings. For this cabinet you need: 2 side panels, a bottom, upper spacers that depend on the width of the cabinet, one or two doors, a table top and a lower plinth. For some models, for example, with a triangular sink, four legs are also needed.

Important: When cutting the panels, the chips must be located at the bottom. Make a 16mm indent from the front edge.

Then you need to evenly distribute a layer of putty over all elements of the cabinet and carefully level it with a spatula. After the surfaces have dried, sand them with sandpaper. After making sure that the dimensions of all structural parts correspond to the drawings, we proceed to the assembly. Since in most cases the back wall is not installed, furniture corners should be used to increase the stability of the sink with a kitchen cabinet. When the cabinet is assembled, it needs to be painted or opened with varnish.

Interesting: A special tint varnish is best suited. You need to apply it in several layers and use a brush with natural bristles when working.

Today we have prepared an article on the topic: "How to make the underframe for a sink in the kitchen with your own hands", and Anatoly Belyakov will tell you the nuances and comment on the main mistakes.

Underframe under the sink in the kitchen: equipping the workplace

When arranging furniture in the kitchen, you should definitely think about what the vanity unit will look like. This piece of kitchen set is called underframe. Such a bedside table does not have a back wall; a kitchen sink is installed directly into it.

It is almost impossible to do without this item. After all, otherwise, there will be simply nowhere to wash the dishes. In the cabinet itself, you can hide cleaning products, a trash can and other kitchen utensils from prying eyes. Regardless of whether you are going to purchase the underframe separately or together with a kitchen set, you need to learn to understand the features of the materials, sizes and functions of the cabinet from the kitchen sink.

The dimensions of the sink units in the kitchen are selected individually, depending on the size of the kitchen. Alternatively, the size of the underframe will be based on the size of the sink itself in the kitchen. In the latter case, it can serve not only as a place for washing kitchen utensils, but also as a countertop. Then the main condition is that it is level with the rest of the headset.

Typically, kitchen countertops are standard sizes. They can be 50 cm, 60 cm, 80 cm and 120 cm wide. If the base is small, you need to choose a sink with one bowl and small sides. Small cabinets usually have hinged doors. Larger undercases can accommodate double sinks or a sink with a dish drying rack.

If inside the underframe is equipped with cold and hot water supply, drain, then it goes without internal filling.

The two most common materials from which sinks are made are:

Both materials are made in identical ways using dry production from wood fibers that are processed in a special way. The difference between them is that MDF is a material made using advanced fiberboard technology. It has a composition closer to wood, which means it will cost a little more.

All materials used for the manufacture of sinks are moisture resistant. Bedside tables made from chipboard are quite durable, they are durable and withstand scratches and bumps. However, the material can swell and dry out at the joints between the countertop and the sink. To avoid this, manufacturers specially glue it with a special sheet of plastic. Sometimes solid underframes are made of stainless steel. But the metal vanity units look unassuming. They are rarely preferred by anyone.

Inset sinks are used for solid kitchen worktops. The underframe with a flush sink will look harmonious... If you do everything according to the rules, you can once and for all avoid swelling and leaks at the joints between the underframe and the sink. Such sinks for the kitchen literally "cut" into the underframe. To do this, a hole is cut out on the countertop for the future sink, which is previously circled and a template is made. The tabletop will be sawn on it. After that, a sealant is applied along the edges of the hole under the sink. With the help of clamps, even the corner sink is firmly attached to the worktop. The advantages of inset sinks are often attributed to their hygiene and ease of installation.

Stainless steel sinks can be used as inset sinks, but you will have to tinker with granite sinks.

The underframe option with an overhead sink is a bit outdated. But he still does not lose his popularity... The stainless steel sink is stacked on the base to form a worktop. It is suitable for freestanding underframes that may not belong to the kitchen set. The overhead sink on the underframe is fixed with special L-shaped fasteners.

To protect the surface of the cabinet from moisture and cracking, a silicone sealant is applied to the wide edge of the sink.

It is believed that the underframe with an overhead sink is a budget option arrangement of space in the kitchen. The right solution is an underframe with a flush sink. But cabinets with overhead sinks have many undeniable advantages. They are roomy and perfectly complement the kitchen design. It is easier to assemble it with your own hands. Even beginners have no difficulty with this. The overhead sink can be removed from the underframe for a variety of sanitary and renovation works an underframe with an overhead sink is several times cheaper than a underframe with a cut-in sink.

Sink cabinet all advantages:

The best option underframe depth - 40 centimeters... In the event that you plan to place wall cabinets above the sink, then the depth of the underframe should increase to 55-60 centimeters. All corner underframes are standard sizes:

Door: 0.5cm, 0.45cm, 0.4cm, 0.35cm, 0.3cm.
Module: 1m, 0.95cm, 0.9cm, 0.85cm, 0.8cm, 0.75cm, 0.7cm, 0.65cm.