Do-it-yourself aroma lamp: simple and interesting manufacturing options. Making an aroma lamp with your own hands at home Do-it-yourself aroma lamp from plaster

Sometimes you want to create a romantic atmosphere in your home. An aroma lamp is the best suited for this purpose. It not only burns, but also fills the room with a light pleasant smell. Unfortunately, aroma lamps cost a lot. This is understandable: you pay 90% of the cost for the design. It's better to make an aroma lamp with your own hands, and use the money saved to buy the oil itself.

First, watch the video on how to make an aroma lamp:

Materials and tools for manufacturing
● Two cans;
● Small flat candle;
● Paper;
● Nylon threads;
● Silicate glue;
● table salt;
● Aromatic oil.

Manufacturing

Roll three identical thick rolls of paper. They should be approximately 10 cm long.

Thread the paper rolls to the sides of the cans to secure them together.

Thoroughly coat the threads with silicate glue.

Light a candle and place it in the bottom tin can.

Fill the top jar halfway with water. In order not to wait for the water to heat up from a candle flame, you can use boiling water.

Put a teaspoon of salt on the paper and put five drops of aromatic oil in it. Salt is essential for the oil to evaporate better.

Pour salt into the top can and enjoy the pleasant scent of the aroma lamp.

Aroma lamps have spread relatively recently. Specialists in the field of aromatherapy assure that with the help of smells you can control a person's mood and well-being. For example, some scents effectively relieve nervous tension, while others have an invigorating effect. Using an aroma lamp is the most affordable and popular way of aromatherapy today. The stores offer lamps for every taste, but often at unreasonably high prices. But buying such a device is not at all necessary. An original aroma lamp made with your own hands will be a unique piece of furniture and an excellent helper for.

The principle of the aroma lamp

Almost all aroma lamps, in which the liquid is heated with a candle, operate on the same principle. Typically, such a lamp consists of two parts, one above the other. The top - the bowl - should be solid, but not flat, with a small depression into which the aromatic mixture is poured. This part must be made of refractory material (glass, ceramics, metal).

The upper part of the aroma lamp must be made of fireproof material

In the lower (the so-called "arch") there is a candle, usually small, in the form of a tablet. This part can be of any material. The main thing is to avoid contact with fire and ensure a stable position of the bowl and candle. The liquid heated by the flame will slowly evaporate and fill the room with aroma.

An aroma lamp needs small pill candles

The composition and number of drops in the mixture are calculated based on the size of the room. As a rule, 1-2 drops of oil are enough to flavor 5 m2 of floor space. The effect can last for several hours, after which the aromatherapy session can be repeated many times.

Photo gallery: types of modern aroma lamps

Clay aroma lamp with figured slots resembles a gazebo

Metal aroma lamp with glass bowl looks exquisite

Candles-tablets are inserted into the base of the aroma lamp with a metal bowl

Aroma lamp made of colored glass with a square bowl made of durable glass - a bright spot in the interior

Purple wire aroma lamp made in the form of a ball with a glass round bowl with wavy edges

Green ceramic aroma lamp depicts a frog supporting a bowl in the form of a leaf

Aroma lamp with metal base and glass candle holder is suitable for high-tech interior

Black ceramic aroma lamp with a red bowl has holes in the form of geometric shapes on the sides

How to make an aromatherapy lamp

Today there is a huge assortment of lamps on sale, but it is quite possible that you will not find exactly the aroma lamp that will suit you in all respects. In this case, the right decision would be to make this attribute at home from scrap materials.

The material for making an aroma lamp can be the most unexpected

From a tin can

You will need a small can of any drink and a small candle in the form of a pill. Turn the jar upside down. The recess in the bottom will serve as a bowl to which the aroma mixture is added. Cut out two holes in the sides in the form of windows, so that it is convenient to place the candle and provide air for the fire. Place the candle inside and light it. A homemade aroma lamp may not be very beautiful, but the effectiveness will be maximum!

An ordinary tin can is great for making an aroma lamp

From clay

It is a little more difficult to make a clay aroma lamp with your own hands. For this:

1. Blind a round or oval bowl, and leave a hole in one side for a candle.
2. After that, roll a small piece of clay into a ball, flatten it into a plate and attach it to the top of the bowl.
3. Using an ordinary toothpick, you can decorate the future aroma lamp with various patterns.
4. Dry the workpiece thoroughly, after which the product needs to be fired in the oven. Take into account the characteristics of clay - it does not tolerate sudden changes in temperature. To comply with this rule, it is recommended to keep the oven door open for the first 10-15 minutes. After closing the door, slowly bring the temperature to 200 ° C and continue drying for 2 hours.
5. When the product cools down, insert the candle into a special hole, pour aromatic oil into the plate on top.

Your aroma lamp is ready! The fire will warm up the walls of the lamp and the bottom of the plate located on top, the oil will begin to slowly evaporate and fill the room with aroma.

If you wish, you can make an aroma lamp from clay

Aroma lamp "Elven gazebo": step by step instructions

Especially diligent craftsmen make real works of art from clay. However, if you really want, then such a masterpiece can be made with your own hands. Everything you need can be purchased in stores that sell goods and tools for making ceramic items.

To do this, you will need:

• plastic white clay;
• stacks - ceramic sticks for modeling;
• a clerical knife with a small sharp blade;
• slip - special glue for polymer clay;
• ready-made glaze mixture;
• latex gloves for hand protection.

Step-by-step production of the "Elven arbor" aroma lamp:

1. First you need to mold a candlestick. It consists of a base (a gazebo is attached to it), a curly leg and a flower on which the candle will be installed. The base is a flat clay circle about 1 cm thick. A flower stem is attached to it - three sticks of clay are twisted in a spiral. The flower is collected from 14 curly petals as follows:

1. Arrange 7 petals in the form of a flower, sticking their bases together.
2. Make another same flower with 7 petals.
3. Superimpose the first flower on the second so that you get a complex two-tiered flower, in which the petals alternate, but do not overlap.

First you need to mold the base, curly leg and flower

2. Fix the flower-candlestick on the curly leg. Leave the structure for a while, so that it hardens a little, but does not dry completely.

After connecting the parts, they must be left to dry.

3. Make posts for the gazebo. To do this, roll the clay into a thin sausage 10-15 cm long and twist a spiral consisting of two such sausages. Be aware that twisting will reduce the length of the post. Try not to make very long spirals, as the stability of the gazebo will depend only on them. Ideally, you need such a length that a candle is placed between the candlestick and the bowl and remains small space for burning fire. After you have made 6 uprights, secure them with a slip on the base of the gazebo. Coat the joint with clay. Support the racks with chopsticks or pencils to prevent them from crooking during drying. Leave the structure to dry out a little.

Gazebo posts should not be very high

4. Make a bowl for the aroma mixture. The diameter of the workpiece should be the same as the base of the arbor. Thickness - no more than 0.5-1 cm, otherwise the structure will look bulky, and the racks will bend under its weight. Make sure that the depth of the bowl is not too deep. Attach it to the racks, coat the joints with slip and clay. To prevent the racks from crushing under the weight of the bowl until dry, you can substitute a lump from the newspaper.

A wad of newspaper will support the bowl on the racks

5. When the workpiece is dry, you can remove the newspaper. Cut it with small scissors or simply set it on fire. Carefully, using ceramic stacks and a clerical knife, clean up all irregularities and roughness on the workpiece.

The newspaper must be removed, the irregularities must be cleaned up with stacks

6. Decorate the top of the structure with decor. To do this, you can use small curls and clay sticks.

You can decorate the top of the aroma lamp with clay curls and sticks

7. Decorate the bottom of the gazebo with ivy leaf decor different sizes... The leaves can be cut using stacks or using culinary stamps.

Culinary stamps can be used for decorative leaflets.

8. Leave the gazebo to dry at room temperature, then slowly bring the temperature to 200 ° C in the oven and continue drying for 2 hours. The exact temperature and time of firing will depend on the type of clay (check with the seller when purchasing materials). After the time has elapsed, turn off the oven, but do not open the door - let the product cool completely.

9. Cover the lamp with the prepared glaze mixture. For fixing, dry at the required temperature in the oven (the drying temperature is determined by the type of glaze mixture). If the glaze is fired at the wrong temperature, the product may crack. Remember to wear protective latex gloves.

At the end of the work, the lamp is covered with a glaze mixture

10. Enjoy your new aroma lamp!

Aroma lamps from improvised means

Making an aroma lamp with your own hands is not difficult. Even if you don't feel like putting in some effort to make a special lamp, there are ways to enjoy your favorite scents using the materials at hand that are found in any home. For example, a glass with a candle, decorated with cinnamon sticks, can create a festive mood not only by its appearance, but also serve as an excellent aroma lamp.

A glass with a candle decorated with cinnamon sticks can create a festive mood and serve as an excellent aroma lamp

Ceramic Bowl Express Lamp

The simplest option: take a porcelain or ceramic cup, fill it with slightly warmed water (no more than 50 ml), add 5–7 drops of your favorite essential oil, put the cup on a hot heater. If you need an "urgent" aromatherapy session, this is the best you can do.

Ceramic cup small size will successfully replace your aroma lamp

Orange aroma lamp

For manufacturing you will need:

• one big orange,
• tablet candle,
• the spoon.

Procedure:

1. Cut the orange in half and use a spoon to separate the rind from the pulp.
2. In one of the halves, cut out a circle or any figure of your choice in the center.
3. Spread the oil over the entire inner surface of the orange peel.
4. Place a candle in a whole half of an orange and cover with another one in which a circle has been carved.

Orange peel can be used as an aroma lamp

Safety regulations

When using an aroma lamp, you must follow the safety rules:

• do not leave a burning lamp unattended;
• use an additional stand to protect furniture;
• place the aroma lamp away from curtains or rapidly igniting objects;
• do not spray deodorants, fresheners, or other flammable liquids near a burning candle.

When using an aroma lamp, do not forget to follow fire safety rules

If you have a great imagination, then there can be a lot of variations on how to make an original aroma lamp yourself from ordinary materials. The main thing is to observe safety precautions and not get carried away by too long aromatherapy sessions.

Modern man is constantly in a state of stress. This, as well as bad ecology, affects health and susceptibility to disease. Aromatherapy helps to correct the situation. Essential oils can be used in a variety of ways. A very convenient method is the use of an aroma lamp. Its plus lies in the fact that the lamp can be made by hand yourself.

Aromatherapy is one of the oldest relaxation methods known to mankind. It is believed that special incense burners appeared many centuries ago. Now, as then, special oils are used in them. Esters, due to their volatility, allow you to purify the air in the room and leave behind a pleasant aroma.

The oils are placed in special lamps. The most common are ceramic. Aroma lamps consist of 2 main parts - a bowl for oil and liquid, as well as an arch. There should be at least 10 cm between them. Otherwise, the liquid in the bowl will boil too much. The rules for using the aroma lamp are extremely simple. If it is made of ceramics, then you need to additionally acquire small pill candles. A small amount of water is poured into the bowl and very little essential oil is dripped. Then the candle is lit and placed inside. It should be located under the bowl.

The most important thing in aromatherapy is finding the right ratio of liquid to oil. It is also important to control the time of aromatization of the room. Before using the lamp for the first time, you need to ventilate the room. Then the windows are closed - there should be no drafts in the room. Usually from 2 to 6 tablespoons are poured into the bowl. water. The amount depends on the area of \u200b\u200bthe room. Usually 15 sq. m. you need 2 tbsp. Add 3-4 drops of ether to the same area.

The first time aromatherapy should not exceed 20 minutes. Repeating the procedure regularly, it can be increased to 2 hours. It is not recommended to exceed this time. The thing is that side reactions are possible with such a long procedure. At the very least, you may have a headache.

It is worth using an aroma lamp in many cases. It will not only help create a romantic atmosphere. Essential oils also help relieve tension and relax. To do this, you need to choose the smell that suits you. Also use the lamp during viral epidemics or when someone is sick at home. Useful substances will evaporate when exposed to fire. As a result, they will be kept in the room air for some time, clearing it of microbes.

Now let's take a closer look at which essential oils to choose for different occasions:

1. Elimination unpleasant odors spoiled food or tobacco - opt for mint, lemon oils. You can also opt for rosemary ether.
2. Diseases and their prevention - if there is a person with influenza at home, you can treat the air with an aroma lamp with a tea tree. Eucalyptus also works well. Remember, these oils are very concentrated. Therefore, you need to use them with caution. More forgiving soft options - bergamot or tangerine.
3. Delightful ylang-ylang essential oil is ideal for relaxation. The scent of orange or tangerine will lift your mood. To create a special atmosphere at home or for a romantic date, choose a rose and neroli.

Aroma lamp: photos and types

Aroma lamps are not only ceramic. Modern technologies allow you to make devices similar in action. So, on sale you can find electric aroma lamps. In this case, essential oils evaporate when heated from the mains. More modern options - devices that work as USB sticks. Such aroma lamps are simply connected to a computer.

A fairly common device is a thermal flavoring agent. It can be produced in the idea of \u200b\u200bsmall electronically controlled boxes and containers for ethers or mixtures with water. The fragrance allows you to set the temperature and heating time. You can also use the device to set a preset for the start of aromatherapy.

The thermal fragrance "Oasis" also has the function of dispersing oil particles. This is due to the built-in fan. The Accord electronic aromatizer has 2 oil channels. This allows you to create a variety of aromatic compositions. The disadvantage of the above devices is their high cost.

Do-it-yourself aroma lamp: master class

There are many ways to create scented lamps. Some of them are so simple that they won't take you long. A great option is an orange lamp.

You will need:

1. Orange - 1 pc.
2. Essential oils
3. Pill candle

Manufacturing instruction:

• Take a large orange. Cut the fruit into 2 equal halves exactly in the middle. Use a knife or gentle finger movements to remove all the pulp. Try not to leave a single piece inside.
• Draw a star in the upper part of the hemisphere with a pencil. Then we cut it out with a knife. The inner walls of the orange should be greased with essential oil. The light bulb is almost ready. Next, light a candle. Then cover it with half an orange. The star should be on top. Remember that the workpiece must be large enough. Otherwise, the flame of the candle can set it on fire.

Dr. option - aroma lamp in the form of a can.

You will need:

1. Beautiful little jar
2. Fir branches
3. Small bumps
4. Cinnamon sticks, carnation stars
5. White candles
6. Wick (or cord)
7. Cap

Manufacturing instruction:

• Put all the aromatic ingredients in a jar beautifully. If you don't have them, you can use mulled wine mix. Use orange peel instead of pine cones. It can be beautifully carved in the shape of stars or crescents.
• Take a taper and break it into small pieces. Then put them in a saucepan. Take more capacity. Pour water into a larger pot. Then put a container with a broken candle in it.
• Place a large saucepan over medium heat. Heat it to a boil and then reduce it. We leave on the stove until the paraffin is melted. Meanwhile, cut off a piece of the future wick. In length, it should be about 2/3 of the height of the can.
• We lower it into the container so that the small tip protrudes above its edge. At the same time, pour hot paraffin into the jar. Let the mixture freeze. Take the lid and make a hole in its center. We twist it with a lid, pulling a wick through the hole. The aroma lamp bank is ready! All that remains is to light the fuse.

The work on the creation of the aroma lamp is creative. Here, as in any other business, the easiest way is to repeat what others have already done. There are proven ways to scent the air in a room, and they work ironically. But not all technical discoveries have been made yet and not all design tricks are known. Therefore, prepare ideas and materials - we will create.

Aroma lamp - what is it

An aroma lamp is a device for carrying out hot inhalation. In the very simple execution it is a one-piece body, where at the bottom there is a platform for placing a heat source: a candle or an alcohol lamp, and a bowl is arranged on top, where hot water is poured and oil is dripped. While the fire is burning, healing compounds evaporate from the surface. The device is designed so that water does not boil during lamp operation - if too high temperature the natural composition of the essential oil changes, which is undesirable. You can repeat analogs of ready-made house models from clay, dough, metal and glass jars.

What is such a device for:

• to sanitize the premises. Essential oils almost all have bactericidal and antiviral properties;
• as natural freshener and air fragrance. Essential oils have a very unobtrusive scent - so sometimes people complain that their aroma lamp is not working. In fact, everything is in order;
• to prevent diseases and improve immunity;
• for relaxation and mood improvement.

When essential oil components evaporate from the surface of the aroma lamp, they irritate the sensitive fiber of the olfactory nerve. The signal carried by essential oils goes to the brain: namely, to its most ancient system - the limbic one, which is responsible for our memories, desires and feelings, for the production of certain hormones and neurotransmitters. It is important to choose for aromatherapy not synthetic, not falsified oils, which are mainly sold on the domestic market.

For information: the cost of 20% essential oils starts from 500 rubles. The aromatic extract is diluted in vegetable oil, which is much cheaper; the percentage of essential oil content is indicated on the package. The production of 100% natural professional oil is quite costly - to obtain 10 ml of ether, up to 1 ton of raw materials is processed. So a quality product will cost not 90 rubles or 200 rubles, but from 1000 to 5000 rubles.

Broadcast nerve impulses - commands to the body from the central nervous system - the process is electrochemical in nature. It runs smoothly and smoothly when the brain absorbs organic compounds from natural essential oils. In response to the received signal, the body independently begins to produce the necessary hormones. The reaction to artificial information obtained with fumes of cheap pharmacy ethers can be unpredictable.

The aroma lamp should work no longer than 20-30 minutes, during which time all useful compounds will have time to evaporate from the surface of the water

Catalytic lamps

Catalytic lamps or Berger lamps work on a different principle: a composition is prepared from alcohol and an essential oil diluted in it. The liquid is poured into a glass bottle - it is filled about two thirds. The bubble is similar to the one in which eau de parfum is released. Only instead of a spray bottle, there is a carved lampshade on top and a cap that covers the end of the wick placed inside. The cap and lampshade are removed before lighting the wick. The burner is catalytic: made of ceramics and platinum, it is ignited for only two minutes, then the flame is extinguished. Cover the bottle with a lampshade on top. It takes 20 minutes to flavor a room with an area of \u200b\u200b18–20 m 2. The combustion process continues all this time, but it passes without fire and smoke, so there will be no burning admixture in the air. To extinguish the lamp, you need to remove the lampshade and replace the cap: it is important to check that it is firmly pressed against the body. You can put the lampshade on top and move the lamp away from heat sources.

The combustion process in an aroma lamp with a catalytic burner does not leave a burning smell in the air

Electric aroma lamps

In electric aroma lamps, the oil reservoir is heated by a thermoblock, which is used as an incandescent lamp, therefore, in fact, the device is a small lamp, and the ability to heat oil on it is an additional function. The lamp base is attached directly to the power supply, which is equipped with a Euro plug and an on / off button. A glass or ceramic case is put on top with holes for air circulation and a recess on top where water and oil are poured. The power source in such a device can also be batteries.

USB lamps

A convenient option, especially for work, is to connect a USB heated platform to your laptop and use it for aromatherapy. True, the models produced do not yet differ in a variety of designs: a plastic case and a minimum of decor. Therefore, it also makes sense to copy the principle of the device to another case and adapt a model that is convenient from a technical point of view for the home.

A USB aroma lamp can be assembled at home on the basis of any convenient body of a conventional aroma lamp

Ultrasonic diffusers

A modern development for room aromatization is an ultrasonic diffuser, which additionally ionizes and humidifies the air in the room. The device operates on a 120V network, so before use you need to either change the power supply and adapt the device to a 220V network, or use an adapter. The upper part is removable, under the hood there is a water tank where the glass is poured cold water and 5-6 drops of essential oil. Then the device is connected to the mains and left for 6-8 hours. The vapor is cold, the liquid evaporates very slowly, so that the aroma lasts almost all day. As a rule, the diffuser is also equipped with a variable backlight function.

The aroma diffuser usually has a lot of additional effects - backlighting, modes, a large water tank, and among the disadvantages - the formation of condensation on the surface where the device stands

Safety engineering

You need to prepare for an aromatherapy session. Rinse the bowl where the oil is poured, check that there are no traces of the oil mixture on the outside - it is highly flammable. Warm up the water in the kettle - only hot water can be poured into the tank, the optimum temperature is 50–60 o. Candles are best taken odorless, in metal tablets. The coasters themselves, by the way, can then be reused - they are comfortable, and on the bottom they have a ready-made clip for the wick.

It is recommended to ventilate the room for 20-30 minutes before the procedure. When you light the aroma lamp, close the door, windows and vents. Natural essential oil gives a very unobtrusive aroma - it will not hurt or dizzy and you will not want to go out into the fresh air. If such a desire nevertheless appeared in those 10-15 minutes that the aroma lamp works, you have low-quality oil. Find another use for it: for household purposes, for example, for washing clothes or washing the floor. Remember the dosage: 5-6 drops of oil or oil mixture are enough for a room with an area of \u200b\u200b18–20 m 2.

Do not place the aroma lamp on a plastic or foam surface; it is also undesirable to place the device on a table covered with a tablecloth or oilcloth. During operation, the lamp should not be near heating devices and open fire.

Do not leave the device unattended: the principle "you never know what can happen" has not been canceled, especially if you are dealing with a combustible mixture. Remember that small children and pets pose an additional risk of fire - it is recommended to remove them from the room during the procedure. Only 20 minutes is enough to scent a room, at most 30 minutes, because during this time the oil evaporates. Only diffusers can work for several hours, but there is cold steam and the evaporation process is much slower.

At the end of the procedure, put out the wick / unplug the device and wash the tank in a soapy solution, and then rinse with clean water and vinegar. This way you can use a different scent next time and it won't mix with the old one. Then wash the outside of the case and wipe dry.

Any lamp that is cracked or otherwise damaged should be disposed of.

Care should be taken during the operation of aroma lamps due to fire safety

How to make an aroma lamp at home

• the oil reservoir should be easy to clean;
• bowl volume - not less than 30 ml (2 tbsp. l of water);
• the distance from the fire to the bowl is 8–10 cm so that the water is hot, but does not boil away;
• in appliances that are powered by electricity and USB, the bowl can be tightly attached to the power source.

Made of metal

In general, the materials are taken the same for several simple models:

• a tin can, preferably narrow and elongated, like from under olives or beans;
• marker;
• construction knife;
• candle / spirit lamp;
• container for oil (salt shaker, socket).

Method one.

It is assumed that the lid is already missing from your can - you do not need one for the aroma lamp.

1. Decide what your lamp will run on. The width of the opening for the candle and spirit lamp is different. Estimate the width of the opening and mark with a marker a hemispherical outline.
2. The bottom should be flush with the bottom of the can, the top - so that the fingers pass freely.
3. Draw the same hemisphere on the opposite side of the can.
4. Cut out both phalanges.
5. Put a socket on top, pour hot water into it for two-thirds, drip oil.
6. Light a candle / spirit lamp and place it on the bottom of the can.

Method two.

1. It differs from the previous one in that the base will be an inverted tin can.
2. Also mark the height along the phalanx of the fingers, draw a contour with a marker and cut holes along it on both sides so that the hand passes through.
3. It is not necessary to adjust in width - such a lamp does not have a bottom, you can light a candle and just put a jar on top of it.
4. When the side openings have been made, turn the can upside down and make a round hole in the center for the fire.
5. A bowl can be made from a jar cup, an alcohol burner tank, a glass saltcellar, or an outlet.
6. Pour water, oil, light a candle / alcohol lamp and put it inside the jar.

Through holes are needed for ventilation of air in the case

Method three.

Of the materials, you only need a beer can and a 2.5 mm wire 20-25 cm long.

Method four.

You need a trimmed beer can or a low tin can and a piece of wire 2.5 mm thick and 10-15 cm long. Any piece of board will go into the base. For work you need a drill and an awl.

1. Drill a hole 1.5 cm deep in the plank.
2. Bend the wire with the letter G and insert the long end into the drilled board.
3. Make two symmetrical holes in the jar, pierce with an awl and hang on the wire.
4. Pour water and oil into a bowl. Place a lighted spirit lamp on the board.

If the holes in the jar are loose and the bowl is tilting, you need to press the edges closer to the wire

The fifth method.

What you need:

• 2 low sprat or sprat cans;
• a sheet of A4 thick paper;
• spoke;
• silicate glue;
• linen or cotton threads.

How to assemble the structure:

1. Cut A4 sheet into 4 parts, twist each strip into a tube using a knitting needle. To curl the paper tighter, you can roll a knitting needle across the table.
2. Glue the edge of the strip onto silicate glue, iron the tube several more times on the table.
3. Remove the knitting needle, do the same with the other three strips of paper. Reel in paper tubes first to the jar, which will be a bowl for water.
4. Then put the structure on the second jar and fix the base tubes in the same way. Spread the threads both from above and below with silicate glue, so they will not be combustible.
5. Now you can pour hot water into the upper jar, and put a lighted candle in the lower one.
6. To make the oil evaporate longer, it is recommended to dilute it in an emulsifier - drip the oil into a teaspoon of salt, and then add it to the water.

The support legs are made of paper, but if you coat the threads on which they are attached with silicate glue, the structure will be protected from fire

Sixth method.

The aroma lamp is a little more difficult to implement than previous models. For manufacturing you need:

• 2 beer cans;
• small CD;
• tablet candle;
• glue;
• long scissors;
• copper wire;
• rubber feet for crafts.

What should be done:

1. Cut off the bottom of one beer can, the neck of the other.

   Cut the bottom of one can, the top of the other, any soft metal can do

2. Dissolve the cut off into ribbons 7–8 mm wide, bend the plates at a right angle.

   The cut can will be used to make the evaporator wall

3. From a metal tape, make a ring equal in diameter to the jar, insert it into the part of the jar with stripes. The ring is to be covered with stripes. If they are too long, trim off the excess, but do not throw away the pieces of metal - they will be needed for decoration.

   The metal ring is bent around with ribbons to make the wall more dense

4. Insert the bottom of the second cut can into the ring, bottom up. This will create an evaporator with a double bottom and an air gap - the oil will evaporate much more slowly than just in a can.

   When the second bottom is inserted into the ring, an air gap forms: in this design, the oil evaporates more slowly

5. Twist the spirals from the scraps and decorate the wall of the structure. Wire rings will also perform a decorative function - wrap the evaporator with them from above and below.

   Spirals made of trim strips and wire around the perimeter of the can, as well as a metal plate on top, perform a decorative function

6. Prepare supporting structureby gluing the legs to the disc.

   Rubber feet will give the structure stability

7. Install wide metal strips evaporator stands.

   Metal strips are bent several times and attached to the disk with glue

8. Assemble the lamp housing. Pour water and oil into the bowl, put a lighted candle down.

   The metal legs of the case can also be decorated with metal spirals

From a glass jar

The aroma lamp from a glass jar, according to the principle of the device, is somewhat reminiscent of a catalytic lamp, which looks like a perfume bottle. The model made at home will look different, but it will also decorate the interior.

Lamp with wick

What you need for a lamp:

• transparent glass jar with a tight-fitting metal cover;
• ready wick;
• awl;
• paraffin oil;
• eco-materials (branches, cones, needles, dried flowers, berries and leaves).

Put the pre-selected decorative elements in a jar - flowers, leaves, twigs, fill in with paraffin oil. In the center of the lid, make a hole in advance so that the wick can easily pass. When all preparatory work completed, pass the wick under the lid, lower it somewhere to the middle of the can, or even slightly lower. The aroma lamp is ready. Do not use it for 24 hours, wait until the wick is saturated with oil. When burning, the aroma of fruits, herbs and spices will spread throughout the house. To enhance it, you can drop a few drops of essential oil into the jar.

In addition to alcohol or paraffin oil, add 3-5 drops of essential oil to fruits, berries and herbs to make the smell stronger

Suitable as a case and old lamp incandescent.

In addition to it you will need:

• metalwork hammer;
• thin screwdriver;
• large diameter coin;
• glue or silicone, glue gun to it;
• cold welding;
• syringe;
• wick;
• alcohol;
• essential oil;
• match.

How to assemble such a lamp with a wick:

Floating candle lamp

The floating candle option works when an infusion with a strong smell, such as citrus fruits, is poured into the jar. Therefore, it will be practical to put such an aroma lamp in the kitchen - for freshness.

For a 0.5 liter can you will need:

• 0.5 liters of alcohol or vodka;
• 1 orange;
• 1 lemon;
• tablet candle;
• essential oil of any citrus.

Peel the fruit, cut the zest into cubes or strips, put half in a jar, and leave the other for garnish. Pour in a glass of alcohol and leave for a day to get the tincture. Transfer the remaining zest to the jar, put the lighted candle to float.

From clay

The lamp will last a long time if it is made of polymer clay and baked in the oven.

What you need:

• 150-200 g of polymer clay;
• mineral paints for painting;
• thin brush;
• stack;
• toothpick;
• wick or candle;
• foil to cover the work surface.

How to do:

1. Cover the table with foil, knead the clay until soft. Divide the mass into two unequal parts - one goes to the base, the other to the walls.
2. The bottom of the future lamp is made in the form of a circle; it is enough to simply roll out the smaller part into a cake 1 cm thick.
3. Form the remaining clay into sausages and stack them one on top of the other until you reach the desired height. The walls are conveniently aligned with water and a stack. Then there are two options:
   • you cut a large hole in the wall for a candle, several small ones for ventilation, and mold the top of the lamp in the form of a bowl;
   • you turn your workpiece into a bowl, pull out the spout where the wick will lie - you get an oil lamp.
4. The drawing is applied with a knife or a toothpick, whichever is more convenient. Dry the clay in the air, then bake the form in a preheated oven. It is recommended not to close the door for the first 10 minutes, so as not to test the strength of the material with sudden changes in temperature.
5. Gradually increasing the heat, bring the temperature to 200 o and dry the lamp for 1.5–2 hours.
6. Do not remove the finished product until the oven has completely cooled down.
7. When taken out, the applied ornament can be painted with mineral paints - they are discreet, dim colors. If you want a more interesting decor, you can use acrylic paints.
8. It is recommended to use an aroma lamp every other day. Pour the oil mixture into a lamp in the form of a bowl, put the wick so that its edge lies in the elongated spout and set it on fire. Remember to preheat the water for a candle burner.

The oil mixture is prepared from any vegetable oil with the addition of 1-3% essential oils

Author's master class on making aroma lamp from clay

A user under the nickname DisLikE shared on her blog the experience of making an apple-shaped aroma lamp-candlestick. To repeat her model, you need, of course, a lot of patience and accuracy, but the finished thing, however, is beautiful.

Materials used

• clay;
• rubber spatula;
• stack;
• brush;
• pencil;
• paper;
• glaze for coloring;
• rolling pin;
• sponge and rags.

Progress

1. The work begins with drawing a stencil. There will be through cuts on the front wall of the aroma lamp, for which you need to draw a pattern. The stencil must be cut out immediately and then set aside.

   Using this stencil, then we will cut holes in the front wall of the aroma lamp

2. It is easier to sculpt according to ready-made sketches. We make several sketches, determine the size of the finished product.
3. Knead the clay, roll it into a tight ball, make a depression on top and begin to gradually increase the cavity. It is important to ensure that the wall thickness is uniform over the entire circumference (3–6 mm).

   The walls of the workpiece should be 3–6 mm

4. Cut the uneven edges with a stack and smooth them with your fingers. We form a hollow ball - for this we pull out the edges, collect them in folds, cut off the excess clay. Level the top of the ball with a knife and water or a rubber spatula.

   We align the edges of the ball, and cut off the excess clay

5. Now the regular ball should turn into an apple. On liquid clay, glue a small patch on top in the center (the thickness is about 5 mm), press it well and smooth it, then make a through hole. The same thing needs to be done on the other side - put a patch, smooth it out and make a round hole with a stack, then expand it with your finger. The holes should be symmetrical, then it is easier to mark the cutting line along them.

   We make holes at the top and bottom of the workpiece to mark the cut border

6. Cut off a part of the future apple, lightly tap the rest on the table to give it stability.

   In the large half there will be an aroma lamp, the small one needs to be rolled into a cake and decorated with slots

7. On the convex side of the workpiece, you need to cut a hole for the candle, having previously estimated it so that it fits in size. Do not forget that after drying, clay shrinkage can be up to 30%, that is, the hole will become smaller.

   The hole must be made with a margin, because after firing the clay "shrinks"

8. We roll out a small part of the workpiece into a cake - it is more convenient to roll through a rag, so the mass does not stick. We apply an apple to the workpiece, outline the outer contour. Along the same contour, you need to circle the prepared stencil. We retreat 5 mm from the edge so that the hole does not fall on the seam line, and start cutting. This will be the front wall of the aroma lamp, it is glued to the liquid clay.

   We glue the carved front wall to the workpiece on liquid clay

9. From a piece of clay we sculpt a leaf and a stem, then we apply the clay to a real sheet so that the veins are imprinted. Then the clay must be carefully separated and glued to the apple. Dry in the air, but not in the sun. Then we bake, paint with glaze and bake again.

   Ceramics is always an experiment, it is difficult to predict what color will turn out

From orange

If you want to make an orange aroma lamp - do it, but you need to use it right away, it won't stand for a long time.

What is needed

• 1 large orange
• olive oil (1 tbsp. l);
• citrus essential oil (2-3 drops);
• tablet candle;

Cut the orange, remove the pulp from both halves, grease the walls with an oil mixture. Place a lighted candle on the bottom, cut a round hole at the top and connect both halves. You can take more oil - pour it into the bottom half and make an oil lamp out of the orange. A cotton thread is suitable as a wick.

Before lighting the candle, brush the orange halves with an oil mixture - olive oil and 2-3 drops of any citrus oil

The second version of an orange aroma lamp involves more ingredients, except for an orange you will need:

• paraffin;
• olive oil;
• citrus essential oil;
• needles;
• 2 wicks.

Cut the orange in half, remove the pulp, and brush the halves with an oil mixture. Place a wick in each bowl. Heat paraffin in a water bath, add chopped needles or zest to it and fill the halves of the orange. The tail of the wick should protrude 1–1.5 cm out of the bowl. Leave the candles to cool for a few hours. You do not need to put it into the refrigerator, the paraffin will set unevenly. Such an aroma lamp is also being prepared shortly before use.

From dough

What you need:

• 1 cup flour;
• 0.5 cups vegetable oil;
• 0.5 cups of water;
• wick;
• acrylic paints;
• thin brush.

How to do:

1. The dough should be firm, so do not pour all the water into the flour at once, add gradually.

   The dough is kneaded with flour and water

2. Roll out part of the dough into a cake, form the walls of the bowls from the rest, make an elongated spout for the wick. You can make a pattern with a knife or toothpick.

   One piece of dough can make several pieces

3. For baking, preheat the oven to 200 ° C, grease a baking sheet with oil and bake for 15 minutes.
4. Cool the product, paint it with acrylic paints, let it dry.
5. Fill the lamp with oil, such as olive oil, add 5-6 drops of essential oil. Place the wick in the bowl, leaving the tip on the surface.

   Dough oil lamps can be used several times, but they are short-lived

How to make aroma lamp candles at home

To make candles with your own hands, you need:

• wax or paraffin, melted old candles will do;
• cotton thread for the wick;
• forms for candles;
• wooden sticks or toothpicks for attaching the wick.

Let's start creating candles:

1. Grate wax (paraffin) on a coarse grater and melt in a water bath, stirring constantly. In order not to spoil the dishes, you can melt the wax in cans, they should be different in width so that one can freely enter the other, you can take the same in height. If desired, the wax can be tinted by adding rubbed wax crayons of suitable colors.

   Make sure that the paraffin melts completely, there should not be even small pieces in the candles

2. Place a piece of cotton thread in each mold, so that the end with a margin remains on top - it is convenient to fix it on a wooden stick.

   For small tablets, use toothpicks as a holder

3. When the wax is ready, pour a little at the bottom of each mold to secure the wick at the bottom. It's good if you still have metal tablets from old candles, they usually have a handy wick holder.

   A little paraffin on the bottom of the mold needs to be poured to fix the bottom edge of the wick

4. Wait about a minute for the wax on the bottom to set and fill in the form to the top.
5. The candles should stand for about a day for the wax to harden completely.
6. Then you can cut off the tip of the wick - it should be well saturated with wax. Recommended length -1-1.5 cm.

Ready-made store candles can be scented, then they will replace the aroma lamp. Take a favorite essential oil or mix it up with several oils. Lubricate the entire surface of the candle, wrap it tightly in a plastic bag and store in a cool place for 2-3 weeks. During this time, the wax will be saturated with your favorite aroma, and you will feel it when burning.

Electric aroma lamp with your own hands

The easiest way is to assemble a two-in-one unit: an aroma lamp and a lamp. From materials you will need:

• incandescent lamp 15 W with base;
• adapter cartridge-fork;
• lamp stand;
• can;
• steel wire;
• oil reservoir (socket, saucer).

1. The bank will act as a lampshade. At the bottom, make a hole for the chuck.
2. Screw in a low power (15W) lamp. At the bottom, make two small holes for the wire, on the side, two more holes for ventilation.
3. Bend the wire at the base with the letter P, then measure the same height on each side of the can and make it there and there along the fold.
4. Make the second fold to fix the can on metal frame... The wire inside the can should not interfere with the shade. For a secure fit, process the ends of the wire with a soldering iron.
5. When the lamp is to be used as a lamp, direct the light to the side, when for aromatherapy - fix the homemade lamp in the up position, put a socket of a suitable diameter on top. The oil will evaporate from the heat generated by the lamp being turned on.

An energy-saving lamp for heating oil will not work; a low-power incandescent lamp must be screwed into the cartridge

How the aroma lamp works on electricity - video

How to assemble a USB aroma lamp

It is quite possible to use a heated USB stand as an aroma lamp: just put a saucer of water and oil instead of a mug. If this option is not interesting, you can assemble a structure that will work on resistors.

1. USB 2.0 port is 5V 500mA, withstand resistance up to 10 ohms. If you count on 11-12 ohms of resistance, and there is a desire to protect the device from possible overloads, you need to get a total of 4 watts of power. The designer of the USB lamp circuit, when he was assembling his model, found 0.5 W resistors at home, that is, he needed 8 pieces.

   For convenience, the circuit has a switch to turn the aroma lamp on and off without pulling out the USB cable

2. Resistors are located in the same plane, the leads must be soldered.
3. It is supposed to fasten the structure to a flat surface so that the heating is uniform. That is, you need to find a regular aroma lamp, where the oil reservoir does not come into contact with the body.

   Heating glue creates impurities in the air, which is undesirable in aromatherapy, so it is better to use paper clips for fastening

4. To connect to USB, power is taken from the red and black wires. The wires are glued to the lamp body.

   The wires in the assembled lamp are not visible; that the lamp is working, it is clear from the lit LED

What can replace the aroma lamp

It is possible to scent the air in the room and arrange a relaxation session without an aroma lamp. Simple analogs of this device will help.

Aroma stones

You can make aroma stones from salt dough.

1. For 2 cups flour, add 1 cup finely ground salt.
2. In a glass of hot water, stir any dry food coloring and 5-10 drops of essential oil.
3. Add 1 tbsp to flour and water. l vegetable oil and knead the dough.
4. It is convenient to use silicone molds for molding.
5. If desired, the dough can be decorated with a pattern, then left to dry. The stones are porous and retain the scent for a long time. As you exhale, you can freshen it up by adding a few drops of oil to the surface.

Scented stones can be molded from salt dough, gypsum or clay.

Gel flavor

How to make a gel flavor:

1. Add 2 tbsp to a glass of boiling water. l gelatin, stir.
2. Add 1.5 tbsp. l of glycerin to reduce water evaporation.
3. Take cinnamon powder or any other extract with your favorite flavor and 2-3 drops of your favorite essential oil - in this case, also cinnamon.
4. Choose a color based on what your fragrance will smell like. Any natural food coloring will do. You can take ground instant coffee, for example.
5. Stir all the ingredients, pour the mixture into a glass or jar that can be placed in a prominent place in the living room.
6. After preparing the mixture, put it in a cool place for 2 hours. Decorate to taste when you get it.

Try to add only natural food colors to the flavor.

Aroma sticks

How to do:

1. Add 25 drops of essential oil to a glass of any unscented vegetable oil.
2. Add 2 tsp of alcohol and mix thoroughly.
3. Pour the mixture into a narrow-necked bottle or vase.
4. Place a few 15–25 cm long bamboo sticks in the oil.
5. When the fragrance diminishes, you can add a few drops of essential oil to the bottle.

Better to take bamboo sticks, they absorb aromas well

Hydrogel Fragrance

A hydrogel is a small elastic polymer ball. In everyday life, they are used as wet soil, but the flavoring from them will also come out quite good. For a sample, one bag is enough (the packaging is similar to the one in which beads are produced) and 7-10 drops of any essential oil.

1. The oil is added to the water - how much is needed is indicated on the label.
2. Balls are placed in the water and left for 12 hours. Use a large container as the hydrogel will grow in size.
3. When the balls are saturated with your favorite scent, transfer them to transparent vases and jars and place them around the apartment.
4. The fragrance can be refreshed as needed by adding a solution of essential oils to the hydrogel.

To fill a vase, you need one small sachet of hydrogel - the balls increase in volume by almost 100 times

Baking soda flavor

Making such a flavor is simple:

1. Soda keeps odors for a long time. Sprinkle it a centimeter layer on the bottom of the can.
2. Add 7-10 drops of essential oil.
3. Close the jar with a lid and shake well.
4. Use an awl to make ventilation holes in the cover. If there is no lid, you can close the jar with a layer of foil, and make small holes with a needle.

To prepare a flavoring agent, soda with essential oil added to it must be tightly closed with a lid, and small holes must be made in the lid

Making an aroma lamp with your own hands from scrap materials is a simple process. Materials are usually always found on the top shelf in the pantry and in the kitchen. And if something is missing, you can adjust the model for yourself, change something and add. After all, creativity is a space for experiments.

Recently, for the treatment of certain diseases, they increasingly resort to the use of traditional medicine methods, the most popular of which is. Healing properties provide directly aromatic substances. Aroma lamps are used to spread these substances around the room. at home will not only be an excellent tool for prevention and treatment, but also help to relax and calm down. Today we will answer the question of how to make an aroma lamp and how to use it.

How to use an aroma lamp

In the traditional version, it is a small ceramic vessel in which there is a bowl for evaporation and a decorative recess where a candle is placed. In modern aroma lamps, the candle is replaced by a heating element.

The principle of use is very simple:

1. Pour 3-5 tbsp into a bowl for evaporation. spoons of water.
2. Add essential oils to it (1 drop per 5 square meters of the room). The maximum amount is 15 drops, the minimum is 3. For example, you can.
3. Light a candle or turn on a heating element.
4. During the aromatherapy process, the water will begin to evaporate, so you need to periodically add it.

Some tips for use:

• The distance between the fire source and the bowl of oil should not be less than 10 cm.
• It is better to ventilate the room before the procedure, but during the therapy itself, the windows must be closed.
• The time of one session is from 20 minutes to 2 hours.

Safety engineering

Aroma lamps are a potential source of fire. In order to avoid accidents, you should remember the basic rules when carrying out aromatherapy.

1. The aroma lamp should be in an open place (there should also be free space on top).
2. The lamp should be placed on a support so that the furniture does not heat up.
3. The lamp should stand on a flat surface in a well-secured position.
4. There must always be water in the evaporation bowls.
5. The temperature in the bowl should not exceed 70˚.
6. When using the aroma lamp for the first time, pour only water into the bowl to ensure that all the above conditions are met correctly.

Selection of essential oils

For aromatherapy with the maximum effect for your body, you must choose the right one.

To calm and relax the body:

• Orange Blossom Oil

Energizing and invigorating:

• Bergamot
• Rosemary

For headaches:

• Chamomile
• Clary sage and santalum blend
• Sage

How to choose essential oils

Rules for the selection of quality oils

• The name of the plant in Latin must be on the label (it consists of two words, for example, Eucalyptus viminalis). Also, the manufacturer should be indicated there.
• Essential oil in a transparent bottle, most often, is of poor quality, while in dark and brown bottles the opposite is true.
• The oil should be homogeneous, without sediment and floating particles.

How to make an aroma lamp at home

After reading articles about the benefits of aromatherapy and their magical effect on humans, people run to the store to buy an aroma lamp. However, it soon turns out that the presented models are either too expensive, or do not fit the interior of your apartment, or simply seem unsafe. But you should always remember that making an aroma lamp with your own hands is not difficult. Below are several methods of making it.

From tin cans

Required items:

• Tin can with a smooth top.
• Sharp knife
• Candle
• Hemispherical utensils (for example, a bowl or ladle)
• Various decorations (shells, sparkles, etc.).

How to make an aroma lamp with your own hands:

Another option is how to make an aroma lamp from cans at home:

From clay

Required items:

• Special clay for modeling
• Knife or toothpick
• Foil
• Candle
• Water and paint

How to make an aroma lamp from clay:

1. Lay foil on the work table and begin to knead the clay.
2. Roll out the clay into a cake (about 1 cm in height) and give it the desired shape (the classic version is a circle).
3. Roll up the earthen sausages and, laying them out in layers, reach the desired height.
4. Level the surface of the product using a knife and water.
5. After alignment on the aroma lamp, you can create relief patterns.
6. Take the garment outdoors, preferably in sunny weather, so that it dries faster.
7. Then put the aroma lamp in the oven (every 15 minutes you need to increase the temperature by 30˚ and reach 200˚ in total).
8. Once your work is dry and completely solid, you can draw different ornaments and patterns on it.

From a glass jar

Required items:

• Clear glass jar
• Wick
• Paraffin oil
• Various aromatic plants (berries, nuts, cones, etc.)

Manufacturing procedure

1. Put all the necessary spices in a jar and fill them with paraffin oil.
2. Using an awl, make a hole in the roof and stretch the wick so that it sinks 2/3 into the oil.
3. Screw the lid back on and light the wick.

From orange

Required items:

• Big orange
• Pill candle

How to make an orange aroma lamp at home:

1. Cut the fruit in half and, using a knife, remove all the pulp completely.
2. In one of the hemispheres, cut a star in the center (or another shape of your choice).
3. Brush the entire inner surface of the orange with aroma oil.
4. Place a candle in the half of the fruit where there is no cut out figure and cover with the one where it is.

From a light bulb

Required items:

• Incandescent light bulb
• Screwdriver
• Coin of 5 rubles
• Cold welding
• Rubbing alcohol
• Wick
• Silicone
• Knife and hammer

Aroma lamp at home from a light bulb - manufacturing procedure:

1. Using a hammer, knock out the core from the base and then disassemble the light bulb using a screwdriver. As a result, nothing should remain inside it.
2. We glue a coin to the top of the bulb with silicone, which will become the base.
3. Pour alcohol and essential oils into the flask.
4. We thread a wick into the hole of the base, cover the edges with cold welding.

Electric aroma lamp

The aroma lamps, which are powered by electricity, give off the purest aroma of oils, as there is no paraffin odor.

Required items:

• Cylindrical tube without bottom
• Scented Oil Dishes
• Cartridge and stand for it
• 15 watt light bulb
• Cable with plug

Electric aroma lamp at home - manufacturing procedure:

1. Assemble the cable, plug and socket into a single whole and screw in the bulb.
2. Fasten the structure on a stand, place a cylinder on top.
3. Place a suitable container on the cylinder.

By the way: if you need to quickly conduct an aromatherapy session, then use the following method: pour water and essential oil (10 ml per 1 drop) into a ceramic bowl, put it on a hot battery. You can also simply put a piece of cloth on the battery that has been soaked in a solution of aromatic oils.

In fact, if you have a well-developed imagination and ingenuity, then the options for how to make an aroma lamp at home can be endless. The main thing is to remember about safety precautions, and do not get carried away by long sessions.