How to make casts of children's handles and legs. Sleeps of the handles and legs: how to make with your own hands? Three manufacturing options and decoration tips. Salt dough imprint

For the manufacture of trace of the handles or legs of your baby, that is, the first trail of the crumbs, you need to familiarize yourself with this instruction.
All materials that are intended for the manufacture of casts do not harm and cannot cause.
For their manufacture, a small amount will be required, it does not distort the child, because the technology on which the cast is made is an innovative, and the composition from which hypoallergenic cast will be made.
Specialists specially developed kits so that parents can independently create children's casts.
Often, the parents of the kids were acquired in the stores the sets, but the beam mass was not enough for a sufficient number of blinds. But there are sets with which parents have several attempts before a real start. They train and begin to sculpt something truly beautiful and neat. It turns out high-quality cast. They can create it not only for themselves, but also as a gift to grandparents, the godpants of their babies, make the castle of children close friends as a gift to them.

In addition to the surfaces of the tiny limbs of your baby, you can create a cast of two in love or newlyweds, your own hands.

Today, there is a large abundance of such things on sale, resorting to the help of which it is easy to create your own design of the cast.
And on the Internet there are many samples for the design of the cast.
If you want to put the resulting cast on a table or shelf, it is necessary to pour a plastic mold, for example, from under sweets, plaster, paint it with any paint, then glue the resulting set of legs or handles with good glue.

Sets for creating casts 3D

Check the video on how to create a cast:

Now we will analyze this video in more detail: mix a dry gel in the necessary proportion, whipped with a mixer until a homogeneous mass is formed, convenient for use. After that, we lower the leg of the child into the mass, take it out. Pour the shape with special plaster, after a while we take out the resulting sculpture.
Pretty it is not difficult, right?
And now we will stop more detail on the proportions that you need to mix water with an impressive gel.
Take 100 grams of the gel in a dry form, also 400 milliliters of water. Well, to create an adult hand, instead of a mayonnaise bucket take a bottle of two liters of plastic, cutting her throat. Take 250 grams of gel per liter of water.
For children whose age is in the range from and older, it is necessary to calculate the proportions on their own. To do this, measure the required amount of water for full immersion of the hand or legs of the child in the container.
In order to pour shape, take a special plaster. To pour one cast Ten five tablespoons of plaster and 0, 05 liters of water.
In order to pour one hand of an adult hand, you will need 20 tablespoons of gypsum and 0.18 liters of water.

Sets for creating casts 2D

Create a convex cast of any part of the tiny limbs of your baby.
This technology involves plastic material for reusable.
It is rather plastic and soft, it is capable of transmitting each fold and a line of leather, perfectly holds the shape.
But this material can be used almost unlimited.
The basic condition for storage is the mandatory finding of the material in the jar, the lack of contact with water, talc and oil.
This set will help you independently make the castle legs and handles every month. You will compare how the kid has grown.
And now video instructions for creating cast 2 D:

With the analysis of this video, we want to clarify again that the convex layer of the handle is done with the help of the absorber finished mass manually, is poured with special plaster. Then everything dries, the cast is pulled out, the mass is warm again. From her a new cast is created.
After this procedure, the blind mass is warm again, it is put in the package in which the air will not come to the next time to get the mass and again create a sculpture.
Sleeps can be painted in any color you like. This can be carried out using watercolor paint, gouash, acrylic. Stick what happened to the photo frame. At the same time, use any decor that you like, any collages, booties, biretop, a pacifier, a snapshot of an ultrasound, body, pamper, hat. The main thing is to apply your fantasy.

Surely all parents want to preserve warm spiritual memories of childhood of their kids. But, unfortunately, even the most detailed pictures may not always convey the thriftful magical feeling, which is tested by mom with dad while touching the tiny fingers of his child. Children's handles and legs come to the rescue of sentimental parents in this case, with their own hands made.

Colorful traces

The first thing that comes to mind to perpetuate the handles and the legs of the child is to dip in the watercolor or gouache and print on plain paper or cardboard. Yes, this is not the most original wayBut it is inexpensive and fast. To keep this sheet for a long time, you can either illuminate it or put it in a beautiful subframe.

Plasticine legs

Also, a simple option to make castlers of children's handles and legs with their own hands is plasticine. The one is best suited that he himself freezes in the air, or a special mixture for modeling. Mass should be flattened in the form of a medallioner and print a handle or a feet of the baby in it. Be sure to make the hole until the plasticine is drying, so that the "home relic" can be suspended on the ribbon.

Salt dough imprint

Many of us were sculpting in childhood "salty" figures, and now, becoming parents, salty dough It will help us to capture the tiny fingers of our kids. So how to make the castlers of children's handles and legs of salt dough?

We dissolve the salts of the salt in the water glass and add a glass of flour (more than the dough will not be distinguished from the hands). The mass that was turned out to be divided by 4 the same parts and rolling the rolling pin on flat swarms with a thickness of a couple of centimeters and the size of a children's handle and a leg. Dry clean palms and the feet of the kid deeply pressing each piece. If the blinder turned out to be fuzzy or do not like you, you can roll the dough again and repeat the procedure.

When the cast is ready, put the dough for 2-3 weeks to dry. After that, the dough can be painted with acrylic paints. As you can see, this method is quite painstaking, but the result will be the durable and original casts of the handles and the legs of the child from the salt dough.

Salted Test and Gypsum

Even more scrupulous and unusual way Get imprints (casts) of children's handles and legs with their own hands - hip them.

To do this, we make the dough on the recipe described above, and exactly also form prints, and the test is better to do 2 times more so that the imprint is obtained as closely as possible (2-3 cm in depth). We take plaster (the best set for creativity is best for creativity from special artistic children's stores, but it is possible to build). We dreamed it with water in the proportion of 1 cup of gypsum on a half-table of water (it is important to add water into the gypsum, and not vice versa). Add 2-3 spoons of PVA glue to the resulting cast was stronger. Very quickly all mix and pour into the form with the test.

While the mass is not frozen better to postpone all the ugly edges with a cloth, otherwise they will have to cut them, which can be damaged. We leave for a day to stick the cast of a children's handle (legs) with your own hands. Gypsum usually dries quickly, but that everything turned out quality, it is better not to touch it for several hours. After that, the finished cast can be taken from the dough. All irregularities are thrown away by sandpaper. You can decorate such prints with acrylic paint or make an interesting collage from children's photos with them. The main thing is to approach the process with a fantasy!

Sand blinds

Another way to get the cast of children's handles and legs with their own hands is to use sand instead of a dough. The principle of operation is the same. We smell the sand into the deep container, wetting it with water so that it turns into a thick mass, but did not float in the water and the child's imprint does not grow. I lower the leg or the toddle of the baby deeper (1-2 cm) so that the imprint remains, and take it out. Then we lower the gypsum into the resulting mold (the proportions are described above) and leave for several hours to frost. After that, shake off excess sand.

Sleeps from the finished set

It contained several ways to make the castlers of children's handles and legs with their own hands, but you can use ready-made sets for creativity. They allow without the use of girlfriend to create high-quality "handles" and "legs", just follow the instructions. There are 2D kits (only with prints), 3D (palm and foot in full), as well as with the ability to cast a child's hand with an adult hand, cast in the frame, on the stand, in the album, with the engraved sign and much more. The only drawback of this method is the high cost, but those who really know the sense in original and memorable things will appreciate it.

Instead of imprisonment

Create memorable things, whether it's photographs or the first home handmade, it is very important because kids grow very quickly, and we cannot save every detail in memory. In addition to such wonderful blinds, the mother's chest with small treasures can constantly replenish - tags from the hospital or photo from the first ultrasound, congratulatory cards from relatives and loved ones. Photo albums, a bag with the first strand of hair, the first clothing, the first toy, the first dummy or the first bottle, and when the kid will grow up, and the first drawings, the first fakes and many other amazing memorabilia.

Yes, and the child probably in adulthood will want to get acquainted with those things that surrounded him in childhood, and even, perhaps, quite a little bit to remember that wonderful carefree and happy time.

For each mom's heel and palm of her baby - the most valuable thing is in the world. We always kiss them, we call them "sweets", and we really want them to stay so much like small and cute. But children grow, and their heels too. To keep the memory of these tiny handles and legs, you can make as many photos as possible with them, you can make a gypsum or clay blind.

And we want to offer the most creative, in our opinion, the way. Create decorative pictures with fingerprints of the pens and legs of the child. We offer you 7 most original optionsthat can be hung in both children's and, for example, in the kitchen. By the way, pastel shades of paints look at such drawings harmoniously.

Owl, wings and ears of which is a fingerprint of a nursery leg.

Wings butterflies from fingerprints of baby legs.

Sun rays from footprint.

Flowers - imprints of children's little legs.

Family tree of Pope hand, mothers and baby.

Good whale with fins from footprint.

Available to each wishes. The casting, made in all the rules and in compliance with the proportions when kneading the working solution, will be very realistic.

The quality of the gypsum will depend on appearance finished product and its strength characteristics. To achieve maximum similarity, a high-quality form is necessary. For its manufacture use special materials.

Idea

For lovers, a gypsum casting couple woven hands together can serve as a gift for a significant date. Often, such a composition is ordered newlyweds on the day of the wedding.

Children's casts, palms and legs, book parents for memory in addition to photographs and video with their kids. Such a souvenir, decorated in an elegant frame, can be given to relatives and friends as a memory of a memorable date: the first or anniversary day of birth, baptism, the first independent step of the child, etc.

You can create a whole collection of such blinds made in different periods active growth of the child. Later, holding them in the palms, children maybe they will remember the happy moments of their childhood.

Elegant gypsum hand, with their own hands made and decoratively decorated, can serve as a detail of the original composition. Such scenery, for example, can be used and as a mannequin for storing rings.

Gypsum

For castings in the form there are many different materials. This is paraffin, wax, concrete, silicone, metals, even chocolate can be pouring into the dietary form. Now the compositions of plastics, resins are available. All of them have their own casting features. To answer the question of how to make gypsum hand, you first need to understand what kind of material it is. It is also important to understand its casting technology.

Gypsum powder is a natural material. It has a white or grayish color, thin grinding, quickly absorbs moisture when adding water. Get it firing a gypsum stone and differ in purpose: for medical purposes, for molding, for plastering works and production plates.

Gypsum for construction has a larger grinding, medical is the cleanest, molding - slowly grasps. Useful feature For sculptures is an increase (up to 1%) of the working composition in the amount. This extension makes it possible to fill the shallow shape pattern. When cooking a solution, after a few minutes, it begins to harden and fully seizes for 20 minutes.

Features of technology

Store gypsum powder is needed in a dry place. It is unsuitable for casting, it is not suitable for casting, it does not grasp. His characteristics and long-term storage are worse. The working solution of plaster is prepared quickly. From a long mixing, it "is crushed" and is weaker than grasps, which ultimately leads to the loss of the strength of the finished product.

If the working solution hardened until the fill is completed, it is already unsuitable for work. Adding water and re-stirring it will not fix the situation. Slow down the decay of the solution can help liquid glue. It (3-4 spoons on the water bucket) are added pre-mixed well.

You need to dry the casting at temperatures up to 60 degrees. It is not desirable to exceed this limit - the material loses strength and begins to decompose. Gypsum hand is manufactured with their own hands, taking into account all these nuances. To make the finished product hard, the solution is kneaded on lime milk.

Moisture and dampness negatively affect products from plaster, so it is necessary to use and store them in the room, especially if they do not have a protective coating.

Preparatory operations

The manufacture of a gypsum hand is possible at home without the use of some special technologies and special equipment. However, that the casting process go smoothly, you need to carefully prepare. Different batch of gypsum (especially building) can have different collapse times.

To accurately recognize it, it is best to carry out a test damper and pouring a small amount of solution into any simple shape. This will make it possible to accurately calculate the proportions of gypsum and water, to determine the time segment, within which the solution saves cast properties. As a result, it will help to save material, time and nerves.

At the preparation phase, it is determined with a form capacity, and a suitable vessel for kneading a gypsum solution is selected. For one-time fill you can take disposable dishes. If it is planned to paint and further, it is best to get rubber plaster for kneading a working solution.

For these purposes, the half of the old baby ball is suitable. The dried gypsum from the walls is easily exfoliated during rubber deformation. The skin of the hand, which will be immersed in the molding mass, can be lubricated by a thin layer of castor oil or petroleum.

Simple clay

Trial gypsum hand of hand can be successfully cast into a mold of clay. It will not be a full-fledged bulk copy, but it will give the opportunity to get the first practical experience. Clay is affordable MaterialIt can be used many times after unsuccessful attempts that it is just suitable for beginners.

We need two cuts of the board or plywood in size more palms for 5 cm. They are lubricated vegetable oil or Vaseline. It is necessary so that the clay does not stick. The arm is put on the board, it is tightly pressed and begin to apply over with water moistened with water and scenery to the state of the thick test of clay, it is good in it and sealing it.

The overall layer should be obtained at least 5 cm. The top is riveted along the plane and covers with another board. The whole design with the hand gently turns over. The bottom board is cleaned, and the palm is carefully free. Filling form is ready. To get ideal castings, plastic molding masses are used.

Alginate for Slepkov

To make a form for a solid casting of a complex shape, use special compositions. One of the most available options is alginate mass. Its main purpose is the manufacture of casts in dental practice. But such material is quite suitable for sculptural castings.

Alginate is a raw material from seaweed. The dry powder, mixed with water in accurate proportions, quickly thick and acquires the properties of dense jelly. If before the process of setting in such a mass, put the hand, and then, after achieving the optimal density, it is neatly removed, the cavity is formed in the form. If you pour the gypsum solution into it, then it forms an exact copy of the hand after hardening.

It will not be possible to remove the casting without destroying the form. Alginate mass in a state of plasticity is not long, it begins to lose moisture, becomes fragile and destroys the deformation. Therefore, the fill with the work make up immediately after removing the hand. In this case, you can expect high quality cast copies.

Some brands of alginate mass change color as hardening. When kneading, they have one shade, in the initial phase of setting (the optimal moment of immersion of the hand) is another, after reaching the density (when the limb can be removed) - the third one. The process of manufacturing a gypsum hand with such a molding material forces to anyone who wants.

Preparations of solutions

Gypsum hand is cast in advance prepared form. In the mixing container is absorbed clean cold water in required quantity. It is evenly poured dry powder of plaster. Ideally, he must form a slide above the surface.

Gypsum begins to intensively absorb water. At this time, it needs to be well stirred. Do not do it too intense, as air bubbles are formed. They remain in solution, fall into the form and after it is frozen forming sinks and cavities. Therefore, it is possible to use a drill with a nozzle for kneading only on small turns. It is better to do everything manually using a spoon or a wooden stirrer. The goal is to get a homogeneous mass without lumps, in thickness resembling sour cream.

The proportions of water / gypsum (approximately one to two) are determined experimentally in advance. After the end of the kneading, the container is slightly cut to the exit of air bubbles on the surface. The resulting foam is collected by a spoon. The prepared working solution is immediately poured into the form. The time from the beginning of kneading to the fill is not more than a minute and a half.

Fill in the form

Gypsum hand is made by the method of casting in the prepared form. The solution is added by portions. If they fill in a complex form immediately, air bags may form in it. In such emptiness, the gypsum solution does not fall, as a result, the finished model will have defects.

To avoid this, the form turns into all parties after infringing the first small part of the working solution. So it spreads on internal surface And falls into all the deepening. Air inside does not accumulate and gradually displaces.

With the following portion, the gypsum solution is deposited on the walls more and more, its layer becomes thicker. When complex sublinks are completely filled, you can pour the remaining part of the gypsum.

The technology of making a child's hand is slightly different from the workflow with adults. The fact is that the child, as a rule, cannot keep his hand in a permanent position until the molding mass grabs. All portraits all spoil with your fingers during the molding. Therefore, it is best to carry out this procedure during sleep in its deep phase.

Alginate molding mass is used. She is kneaded in dishes suitable size. All components are prepared in advance according to the instructions. Alginate powder is poured into the water and stirred it with a spoon to a homogeneous state of about one minute.

Cold water is used for adults. But that the child during sleep does not wake up from contact with a cool mass, it is better to warm it. Warm water for kneading significantly reduces the time of using the molding mass, so everything needs to be done quickly.

When the mixture is ready, it is transferred to a suitable glass, chosen along the hand of a child, and put its limb there. Time to hardening the mass of 1-2 minutes. During this period, it is necessary to keep the shape alone to get a high-quality imprint.

After the reserved time, the baby's hand is carefully removed. As a rule, this happens without problems, as the form is plastic and is not deformed by the light load.

Immediately after that, a working solution is prepared and filling. Hold plaster in the form no more than 30 minutes. Later, alginate mass begins to give water, which will negatively affect the casting. The form is removed from the glass, cuts into parts, the gypsum imprint of the child's hand is released. It is cleared and leave to dry.

By the same principle, the hands of an adult person or a child who can keep his hand alone during molding.

Sets for self-making 2D- and 3D locks

Recently, the inhabitants have been popular with a copied souvenir hand. With your own hands, how to do it, is described in detail in the instructions for finished sets for modeling. Such a kit is ideal for those who want to try their hand in bulk casting, but not able or not wanting to understand the marks of molding masses and gypsum.

The set will be more expensive than separately acquired components. But manufacturers focus on the convenience of such a configuration. In addition, they give a quality guarantee for their materials. The set includes a dry hypoallergenic mass for forms, simply prepare it, bay with water in the required ratio. There is also a model purified high strength gypsum.

A plastic molding mass of repaid is included in the kit for obtaining castings of simple handles or legs. Before use, it is kneading, they make an impression and pour plaster into it. After frozen, the casting is removed. If it is not assumed to be repeated, the form is again kneading to a soft state and postpone storage by packed in a polyethylene package.

Finish

How to make a gypsum cast of a hand finished composition? To do this, it must be painted. For someone the ideal option There will be toning paint under gold or bronze. Another will choose a bodily shade or white.

An acrylic emulsion is suitable for decorative coating, but its layer, although it is thin, can smooth fine lines and folds on the cast. Although, if the copy turned out to be imperfect, then this option is quite suitable. If you need to save the smallest details, it is better to use aerosol paint.

In front of the trim, the cast is inspected, all irregularities are grinding, defects are corrected. In order for the paint to lay a uniform layer, the workpiece can be pre-primed, it is possible to dry it and then get off the thin sandpaper.

For installation, pick up a decorative base at its discretion and mount a copy of the hand or composition with it on glue. After drying, the souvenir for a larger effect can be covered with varnish.

How to make a gypsum hand yourself for replica replication?

Having worked in the technology of casting and making forms, you can try to expand product range. Copied gypsum hand, with their own hands made, can serve a detail of the original composition.

For example, if you calm it in the item holding position, it can serve as a stand for the phone. In another case, it may be the base of the candlestick or desktop lamp. In the gypsum hand, you can install a decorative glass and such a composition will turn into a holder for the handles or an original colors vase.

For mass copying, a disposable forms are inappropriate. In this case better suitable Elastic silicone. Forms from this material can be used repeatedly. To remove the castings, they are cut on one side and carefully get a copy.

Silicone is installed in the container in which it was flooded in the manufacture, and the process is repeated. For the convenience of extracting castings, you can use separation compositions. In such forms, it is possible not only for plaster, but also paraffin, tin or chocolate. Fantasy authors are limitless - the main thing, do not be afraid to experiment!

Now my sun is already three and a half months old, and she becomes more and more every day, although I do not notice this at all. That is why I wanted to have at least something in memory of her, what she is now.

Somehow I came across an announcement of the manufacture of compositions with clay casts of children's handles and legs. The idea, of course, I really liked - after all, to have an interlock of your favorite feet and brushes much more pleasant than just an imprint or contour drawn by a pencil around tonya sweets. But I decided not to resort to the help of outsiders, but to do everything myself - it is much more pleasant, and the baby can be afraid of foreign people.

I did it like this:

1. Bened salt dough.

It is best to make an elastic salt dough for such a recipe:
2 cups of flour
1 glass of salt (better small)
1 tbsp. Starch / Hand Cream / Vegetable Oil
0.5 - 1 tbsp. water

All ingredients must be mixed thoroughly. Mass should be quite thick. The dough should not crumble. If it turned out too thick - add some water, too liquid - salt with flour (you should always observe the ratio of flour and salts 2: 1).

2. When the dough becomes like this:

We tear away small pieces from him, for which we will make prints of children's legs and pens, something like this:

3. Now, bring a piece of dough to the foot of the child, and tightly shatter. We need to get as a deep imprint. Ideally, on the test, all lines available on the foot of the baby should be imprinted, but I will say right away: it is quite difficult to achieve this, in any case, in the manufacture of prints in this way.

Make a fingerprint of a handle is more difficult, especially if the child is not half a year - my baby has captured pieces of dough all the time)))

5. The two last procedures can be repeated to infinity. I made about five to seven fingerprints of each foot and each hand to be able to choose the most successful.

6. Further there are two ways. You can first bake the resulting fingerprints of children's handles and legs in the oven (about 30 minutes at a temperature of 130 degrees), and you can work with a raw test. In the first case, you can use every imprint several times. In addition, if you bake the dough longer, you can save the trace itself - it also looks very good. You can make a memorable composition and with it)). However, to make casts from a raw dough easier and faster.
I tried both ways, and I liked the second more.

7. So, we take a baked or raw imprint of the children's legs or handles, and pour the plaster into it. Make it need quickly until the plaster is frozen.

We leave the cast to dry directly in the form of minutes by 15.
If you use a fingerprint made of baked dough, it is better to pre-lubricate it with a vaseline or vegetable oil so as not to damage the cast when you take it out of the form.

8. Remove the cast, cleanse from the remains of the test (if you used raw dough) and we are dry. Sew will have long - 3-5 days.

9. Slifting gypsum casts using a knife and sandpaper. I cut your fingers, we delete everything too much, we make the surface smooth. Be careful - watch all the detkins of the lines are preserved.