Sliding doors in the interior of the apartment. Partitions in a studio apartment. Sliding interior partitions

Interior partitions are an integral part of the interior in a studio apartment. Such an apartment is a room in which partitions are initially completely absent, its room is limited only by four walls. With the help of partitions in a studio apartment, you can create and separate a kitchen, dining area, living room, as well as a place for work, a sleeping area or a nursery, depending on the wishes and taste of the inhabitants of the studio apartment. All these functional areas of a studio apartment as a whole represent one common space, which should be correctly zoned and decorated, as well as correctly placed partitions and furniture in order to make the most of the space of the room, but at the same time not overload it. Without partitions, it is impossible to create different zones in a studio apartment, they are very relevant for owners of apartments with such a layout, designers present a variety of stylish and interesting solutions for zoning.

The zoning method and, subsequently, the entire interior of a studio apartment as a whole will depend on who such a living space is intended for: for one person, for a couple or for the whole family. But in any case, the zoning of a studio apartment is inevitable, the number and purpose of functional zones will depend on the number of people living in such an apartment. For zoning, designers suggest using different ways, such as the installation of partitions, walls, bar counters, as well as the creation of a two-level ceiling and floor with a partition between levels, as well as color zoning.

In addition, for a stylish and original zoning using a variety of partitions, it is better to use different materials and their colors for walls and floors in different zones, it is best to make these materials differ in their texture. If you can skillfully distinguish all functional areas in the interior of a small studio, it will be very easy for you to create a cozy atmosphere in the house, you will be able to meet guests and at the same time the bedroom or kitchen will be separated and hidden from prying eyes.

Color zoning

A double-sided colored partition will look very interesting, which will be decorated from different sides in the colors of the functional zone to which it is turned, and a double-sided partition in contrasting colors will look very unusual. It should be noted that this option is quite expensive.

An alternative, more democratic in cost, would be the division of a studio apartment using building materials different colors... The main condition is right choice color combinations. Properly combined colors can help you create a visually wider and more spacious room. With this method of zoning, it is better not to use dark colors, as they will visually reduce the space of your studio apartment.

photos

Partition options

As partitions, you can use both furniture and ordinary construction Materialsinstalled in the form of a wall, for example, drywall. It is very easy to make a drywall wall with your own hands, since this material is very versatile: it can be easily given the desired shape, it can be easily cut, it can be pasted over with wallpaper, painted or decorated in the most suitable way for you.

In addition, a regular bookcase for books can serve as partitions, as well as a wall with through shelves, on which you can place various decorative elements, for example, figurines, flower pots, frames with family photos or beautiful paintings. It is best to use a shallow cabinet as a partition, so that in profile it is not wide and does not look bulky.

You can divide the functional zones of a studio apartment using any decorative partition, and its decor can be very diverse: patterns, carvings, as well as more ordinary options - interesting wallpapers with photos, paintings, or just bright combinations of contrasting colors.

Some, when dividing functional zones, prefer curtains or screens, which looks very beautiful and delicate, but this option is not suitable for every zone. These items are made of fabric and therefore have the ability to absorb odors from the kitchen, so do not use them to separate the kitchen and living room or kitchen and bedroom. Screens are more suitable for dividing a bedroom and any other area except the kitchen.

You can also install a partition with an arch in the room, it will add beauty and luxury to your interior. Beautiful curtains can be put along such an arch. It is best to divide the living and sleeping area of \u200b\u200bthe studio apartment in this way. There are very unusual options partitions-arches are movable partitions. Such divisions can also have a classic rectangular shape.

The main advantage of the portable partition is its mobility. With its help, you can separate different functional areas at any time, whenever it is convenient and necessary for you. Thus, you can often rearrange and change the interior of the studio in an interesting way. Most often the role mobile partitions perform screens. They can be attached using special devices to walls or to different furniture, thanks to this they are securely fixed and create a new separate functional area.

Sliding

Sliding partitions are the best solution for zoning a studio apartment. This element of the interior can provide good sound insulation of different zones from each other. Such a partition is perfect for dividing a children's area or bedroom. She will help at the right time to hide from prying eyes what is needed. In addition, if you have a baby at home, you can close such partitions to provide him with a restful sleep without waking him up with extraneous sounds.

An interesting option would be to install a partition in the form of sliding sliding doors, which can be decorated with images or patterns of your choice. Such doors open almost silently, since they move on wheels on special rails. Such zoning will allow you to create even a separate room in your studio apartment.

For the manufacture of sliding partitions, a combination of wood and glass is most often used. In addition, such a partition can be decorated with a mirror, which will make the interior of the apartment more chic and at the same time visually expand the studio space.

The most luxurious model of a sliding partition is the radius partition. Such a model can completely change the appearance of the room, since it introduces smooth lines into the interior of the apartment. Such an interior design becomes very harmonious and comfortable. An important feature of such a partition is a curved canvas consisting of two or more elements. Moreover, these elements can move either independently of each other, or in a cascade manner, when, following the movement of one sash, other sashes also smoothly fold.

A very interesting option is to use partitions for zoning, which, when they are opened, fold in an accordion. If you fully open such "doors", then maximally free up studio space and save it. This is a big advantage of an accordion door over a conventional compartment door. They very conveniently zone the room and take up a minimum amount of space, while decorating the interior. Designers decorate such a sliding partition in the form of an accordion with gold and silver threads, an openwork pattern or interesting images.

Even owners of private houses want to use all the available space as efficiently as possible. With this in mind, architects, designers and furniture manufacturers are constantly creating ways, methods and solutions for the greatest savings in living space without compromising functionality and comfort. One of these solutions was invented in distant Japan sliding doors.

Sliding doors are a door system in which the movable part does not open perpendicularly, but moves along it.

Advantages and disadvantages of sliding doors

As with any interior design solution, sliding interior doors have advantages and disadvantages.

The main advantage, as mentioned earlier, is the ability to significantly save space. Standard width simple doors vary from 60 to 80 centimeters: this distance is reduced free space the room that opens door leaf... Therefore, the most popular installation of sliding door systems between a narrow corridor and a kitchen or living room.

The second plus of sliding doors is originality general view rooms in terms of design. As a rule, they are made to order, taking into account individual sizes and wishes regarding color and material of manufacture. Mirror panels, cork boards for illustrations and notes, slates for drawing and magnets can be placed on the front of the door.

Thirdly, such door systems are often used today for zoning a large room, for example, to separate the dining room from the kitchen or the sitting area from the living room. Choosing doors made of transparent material, the owners of the house will not even feel the bulkiness of the partition.

However, sliding doors have a couple of disadvantages. Firstly, the mechanism for sliding doors is more complicated, therefore, at a cost somewhat more expensive than the usual hinges.

If the goal of the apartment owners is the most budgetary finishing or redecoration, then it is hardly worth choosing this option.

The second partial drawback is the inevitable slight noise when opening and closing the door. Even the most expensive and sophisticated mechanism will not be completely silent. This fact is not a hindrance for every apartment: if the owners have a sound sleep, the sound will not interfere with a comfortable life.

Types of sliding door mechanisms

The classic version of a sliding door is a structure, the working surface of which moves along a straight line along the wall and is fixed near it. Such doors can be either single-leaf (great for small apartments) or double-leaf.

Radial doors are a tribute to the modern architectural trend to design houses with curved walls. The door leaf moves in a circular path, somewhat resembling the doors of a shower stall. In addition to the role of an interior door, such a design is used to create a small isolated room inside the room: a pantry in the kitchen, a dressing room in the bedroom.

Folding interior doors work according to the "accordion" principle: narrow strips 10-30 centimeters wide are folded tightly and fixed near one of the jambs. A great advantage of such mechanisms is the ability to adjust the width of the passage. In stores, there are accordion doors from two or three wide canvases.

The third type of sliding door system is compartment doors. They not only serve to periodically close the opening in the wall, but at the same time act as this wall. Such doors are used to distinguish between the kitchen and the dining room: work zone opens or hides from prying eyes.

Sliding door material

The planned scope of use of the sliding door affects the choice of material of manufacture: wood. mdf, glass or plastic.

Wooden doors are installed between the corridor and the living room or a sanitary unit: they close tightly enough, do not let light and unnecessary sounds through. A controversial issue is the use of wooden sliding door systems for a children's room.

On the one hand, wood is the safest natural material; many types of wood have a beneficial effect on human health and psychological state even after numerous treatments.

On the other hand, solid wood products are quite heavy (compared to plastic, fiberboard or mdf), which increases the risk of injury to children's fingers if the sash is not closed carefully.

However, this drawback can be eliminated: for the sake of safety, you can put a special closer, or lay a soft material like foam rubber along the end of the door panel.

Wooden doors and other interior elements are good for their stylistic diversity, because with a certain combination of colors and handles, you can redesign the door into any interior style, from white Scandinavian to a massive rough loft.

Significantly more budget decision there will be a door from mdf. The MDF frame is highly resistant to high temperatures... However, this material has a tendency to swell from moisture, so it is highly discouraged to put a door made of this material in the bathroom, restroom or laundry.

Glass doors are preferable to use as partitions in large rooms of private houses or studio apartments. They allow light to pass through so that the space does not shrink. Lovers of the exotic can order colored glass panels that will turn rooms into a riot of colors with enough sunlight.

The main function of glass walls and doors is to let in light without letting in sounds. Therefore, glass door systems are often installed in office premises for conference rooms, offices, meeting booths, libraries and lounges.

Plastic doors are cheap and lightweight, which determines their prevalence among owners of small country houses or renters. As a rule, they are installed only as partitions, for example, to keep children safe from stairs or from pets.

Today, the simultaneous use of several materials is popular: a wooden door with glass inserts is found in many design projects.

Photos of sliding doors in various interior styles can be found in design blogs or other specialized web resources. It is not difficult to note the tendency that glass doors are preferred by supporters of high-tech style, and wooden ones - by loft and Scandinavian style.

DIY sliding door system

A non-standard mechanism does not mean at all that the installation of sliding doors cannot be done by hand. This will help save money and time for ordering from the door factory, especially if the doorway is of a non-standard shape or size.

The set of necessary fittings for sliding doors consists of the door leaf itself of the required size (width and height of a standard swing door or a little more), sliding mechanism, handles, door frame rail and, if desired, a lock. The length of the sliding mechanism is calculated as two door widths, but it is better to buy with a margin, since the mechanism is easily cut off.

In the existing working part of the door in the center of the lower end, it is necessary to make a groove with a depth of about 3-4 millimeters. The rollers that enter the sliding mechanism are screwed to the upper end of the door. Then the guide profile is fixed: it should protrude from one edge by about 5-5.5 centimeters.

The height to which the structure must be fixed is calculated based on the height of the door itself, rollers and the bottom gap (depending on the floor covering and the possible curvature of the floor, the distance varies from 1 to 2 centimeters). The door frame can be made from a regular rail 2 centimeters thick, on the sides of which the platbands are further fixed.

Photo of sliding doors

Sliding doors represent a rather original design solution, which is distinguished by aesthetic, practical advantages and safe, reliable operation.

Pros and cons

Main advantages and disadvantages.

Types of interior sliding doors

These products are divided into several varieties.

Double

They have 2 doors that can move in different directions or in one direction. The double design allows efficient use of free space and is perfect for rooms of any size.

Single

They take up a minimum of free space, do not clutter up the interior, which makes it possible to equip them with standard or narrow openings in city apartments.

The photo shows sliding single-leaf doors in a living room in a city apartment.

Sliding doors

They are the most demanded option. Sliding doors move compactly along the wall, do not take up extra space and can be used in any living space.

The photo shows the interior of the attic room with sliding compartment doors.

Harmonic

It has several segments that move when opened to one or to different edges of the doorway. It can be a folding mechanism in the form of pvc panels or doors made of other materials.

In the photo there are glazed folding doors-accordion in the design of the balcony opening.

Suspended

They are distinguished by the presence of an upper rail, which can be fastened to the ceiling or wall, which allows maintaining the aesthetics of the floor and its covering.

Recoil

Equipped with a thresholdless system and special wheels, which account for the bulk of the door leaf weight. In addition, they allow for the addition of a rigid and secure point of support to the sliding models.

Doors-pencil case

Such built-in pencil case doors are conveniently hidden inside the wall, without violating the integral interior appearance and are distinguished by a high level of noise insulation.

Pictured are white matte pencil case doors sliding into the wall, located between the kitchen and the living room.

French doors

Translucent French sliding products will not only fill the room with light, lightness and refined charm, but also visually expand its boundaries.

Tricuspid

They have a really convenient operation and are especially suitable for decorating a wide opening with non-standard dimensions.

In the photo there are sliding triple doors with frosted glazing in the design of the opening leading to the living room.

What materials are used?

The material from which the sliding structures are made is a very important point when choosing.

Wooden. Door leaves from an array of various wood species are always very relevant. They have a natural and natural appearance and look stylish and expensive.
Plastic. They have many useful functions, are very convenient and safe to use, have a beautiful appearance and a long service life.
Aluminum. Such steel models are distinguished by good strength characteristics and resistance to external influences.
Glass. All-glass canvases are considered quite popular. They can have various convenient mechanisms, original handles and other beautiful accessories.
Combined. Combines different types of materials, such as aluminum, steel, wood or plastic framing and glass, mirror or rattan filling.

The choice of material allows you to influence, not only the performance of the door model, but also to further emphasize the given style direction of the room.

Photo of doors in the interior of rooms

Interesting photos of the decoration of various rooms.

Balcony doors or loggia

Stylish, ergonomic and a wide variety of designs sliding canvases, it turns out to choose the most suitable option for a balcony opening. Most often, fully glazed models are used for the loggia, which transmit natural light well.

To the bathroom

First of all, when equipping a bathroom, it is worth considering its important features. Only high quality and durable materials are used here, which are not afraid of humidity, steam and high temperature.

To the dressing room

Sliding structures can become, not only functional, but also a very original solution, both for large and compact dressing rooms.

To the living room

Sliding doors will become a truly essential piece of decor in the room and allow you to create an amazing design in it. In addition, these products can become an effective zoning element for a small living room, for example, combined with an office.

For veranda or terrace

Fully glazed sliding doors with aluminum or timber frame, create an unobstructed penetration of natural light, create a cozy atmosphere and provide a gorgeous panoramic view.

In the photo exit to summer verandaequipped with sliding panoramic doors.

For toilet

Products made of moisture-resistant materials are perfect for a bathroom, which will avoid their deformation for a long time. For example, it can be practical plastic or glass doors.

To the bedroom

Such designs represent a rather stylish interior element that becomes the central link of the bedroom and significantly improves its aesthetics.

To the hallway and corridor

In the corridor, there are often canvases with mirror or glass inserts, which make it possible to give a small hallway more lightness and visual spaciousness.

To the kitchen

Sliding models with convenient, comfortable placement and saving additional space can be easily used both for decorating an opening in a traditional kitchen and for separating a kitchen area in a studio.

To the nursery

Door products decorated with stickers with cartoon characters, photo prints, various kinds of appliqués or drawings should not only create colorful design nursery, but first of all fully comply with all quality and safety standards.

Into the pantry

The storage room, due to the competent design, turns into a harmonious continuation of the overall interior space. In this case, these door leaves are the ideal option to save space, free up space and avoid clutter.

In the photo there is a kitchen with a pantry decorated with sliding single-leaf doors made of wood.

Varieties of door shapes and sizes

There are several main types:

Big ones. Due to their solidity, they will give the interior a special impressiveness.
High. They have excellent performance characteristics and a truly spectacular look, due to which it turns out to turn a standard apartment into a luxurious apartment.
Arched. They endow the atmosphere with originality and expressiveness and, thanks to smooth and curved lines, soften the geometry of the room, making it look more noble.
Semicircular. Correct radius designs have a particularly original and unusual appearance, adding originality to the design.
Hidden. Thanks to such an effective design technique as an invisible door, it is possible not only to make the atmosphere unique, but also to visually unload the space, bringing air, volume and weightlessness into it.

Sliding door colors

Currently, the color range of sliding structures is not limited to certain shades. However, the most popular ones are the following.

White

Elegant and noble white is considered especially popular and provides an opportunity to shape new conceptual designs.

Gray

Despite its laconicism and restraint, gray color is distinguished by its special character and rich tint palette, which allows to form a truly unique interior.

Black

Incredibly stylish, but at the same time controversial black shade, will undoubtedly endow the environment with luxurious, elegant and slightly glamorous notes.

Wenge

Wenge-colored products always have a more massive and solemn look, which is especially advantageous when decorating wide doorways in a room with high ceilings.

Design and decoration of doors between rooms

Design ideas for interior models.

With mirror

They will give the space majesty, create a mesmerizing effect and at the same time visually expand its boundaries and give additional light.

Stained glass

Thanks to the stained-glass decoration, it turns out to make any ordinary interior luxurious, and turn an uncomplicated door leaf into an art object.

Panoramic

They erase spatial boundaries and fill the atmosphere with lightness, style and sophistication.

Louvre

They are distinguished by a simple and at the same time beautiful and original appearance, as well as due to lamellas, they allow you to maintain a constant air circulation in the room and improve the microclimate.

Barn

They have such a beautiful and presentable appearance that they become the main decorative object of the room, creating interesting visual effects.

With an image

Thanks to sandblasting, painting or photo printing, the space is filled with new bright accents, and the sliding doors turn into an original and unusual addition to the interior.

With inserts

Symmetrical, asymmetrical or staggered inserts with impact-resistant triplex glass, decorated with patterns, designs, toning or matting effect, will give the doors a special elegance and uniqueness.

With transom

A transom is a valuable architectural object, which becomes a rather effective solution in the case of a non-standard doorway.

Examples of sliding doors in various styles

Applications in popular stylistic directions.

Loft

For the industrial style, designs are often chosen from natural wood or rough boards with an accentuated live texture or aged effect. It is also appropriate to use attic or barn structures with a rail in the form metal pipes or stripes painted in dark gray or black.

In the photo there are sliding barn doors made of rough boards in a loft-style bedroom.

Classic

In a classic respectable and aristocratic interior, wooden sliding doors with strict lines, proportional drawing, emphasized design and prestigious and sophisticated appearance are assumed.

Oriental

The elegant and sophisticated shoji models are a familiar element of Japanese style. They can have a decorative lattice, frosted glass inserts or be decorated with intricate bright ornaments, hieroglyphs or even embroidery.

Scandinavian

Natural wooden or glass structures with a democratic design, combined with a similar Nordic setting, made in light, for example white, milky, light gray, beige or sky blue tones, will harmoniously complement the scandi interior.

Pictured living room in scandinavian style with wooden hinged sliding doors.

Provence

Sliding doors made of natural wood or chipboard, in whitewashed shades, pure snow-white or pastel colors, products with glass inserts decorated with engraving, lattice, floral patterns or antique paneled canvases will add a noble charm to the Provence style interior.

High tech

Doors with plastic and aluminum profiles, decorated with solid glass or glossy inserts, will be especially in harmony with innovative and high-tech decorative elements.

Options for zoning a room with doors

Mobile sliding structures allow you to easily change the current layout of a room and create a non-trivial, beautiful and functional interior in it. With the help of doors of this type, it turns out to separate additional zones or organize the division of a room into compact parts.

In the photo there are sliding doors with glass inserts separating kitchen area from the living room.

Such a multifunctional sliding partition is perfect for zoning, both a spacious and a small room, and even for visual correction of a narrow and long room.

Niche Sliding Door Ideas

For this recess, it is necessary to build in sliding models, designed in accordance with the size of the niche, will be the most optimal solution. Thus, it will be possible to create a functional door structure that will perfectly fulfill an insulating role and at the same time will not take up much space.

In the photo there is a bathroom in a niche, decorated with frosted glass sliding doors.

Photo gallery

Sliding doors fulfill their maximum functional purposeshide the room from prying eyes, create good sound insulation and at the same time do not clutter up the environment at all.

It is believed that sliding doors are a novelty among door designs. But this is not true. Many centuries ago in Japan, sliding doors were first invented, which were used as interior partitions in large rooms. That is, it is a very ancient, but still relevant invention. Sliding doors are a very convenient and practical design that is very popular. Manufacturers now offer a wide selection of such products, so it is important to know how to choose the most suitable option for you.

Design features

Sliding doors can have two types of construction, depending on their device:

parallel-sliding;
sliding folding.

They are completely different in their way of movement and mechanism. In addition, they are installed in completely different ways.

So, parallel-sliding models consist of several small sashes. They move on rails and rollers. These are very reliable designs that can last a very long time.

Sliding folding systems have a different design.They always consist of a large number of sections and fold up like an accordion. They have a different principle of operation and are completely assembled against one wall during opening. They are perfect for delimiting different functional areas and for decorating rooms.

Also, all designs include certain components, which are an integral element of such a door system.

So, there are profile guides. Its average length is 1.5-2 m. Also, there is always a lower guide profile and a set of fasteners.
For models that move on casters, castors are provided. There are usually quite a few of them, but the exact number will depend on the length of such a door.
A very important design element sliding doors are the stoppers. They are necessary in order to restrict movement during the movement of the flaps. So you can conveniently fix the sash in the desired position.

The design also includes sashes or door panels, which are the main part of sliding doors. The design has a suspension, cassette, runners, platbands, extensions, clamps. No door functions without these elements. Most sliding doors have a special strip.

It is necessary in order to hide the entire movable mechanism, or rather, the rollers. It also covers the profile guides and makes the door look more presentable. Such strips are called decorative strips.

Types of mechanisms

The system of sliding partitions consists of several doors. Most often, they are made from an aluminum profile that acts as a frame and other material for the door leaf. In this case, glass, plastic or other light material is additionally used. The interior partition has a certain mechanism. Such a doorway can be moved to the right or left.

A feature of the mechanism of room partitions is that it is very functional and at the same time the doors move completely silently. Such a mechanism is suitable for installation in any room.

Parallel sliding partitions have several doors, but they can be presented as one wide sliding canvas. The choice of model will depend on your personal preference. Single-leaf partitions move parallel to the wall or hide inside the wall space. Wall-sliding models are considered the most compact.

Multi-leaf parallel structures have a more complex structure. When opened, they are also parallel to the wall, but, as a rule, they are presented in the form of three or four door leaves. But all these canvases can move independently of each other, separately.

Folding sliding partitions are several panels of the same width. Moreover, usually designs include more than three canvases. In some cases, their number can even reach ten. When you open the door, all the leaves fold down on one side of the opening, flush against each other. In this position, they can be conveniently fixed.

Manufacturers also present suspended, built-in, hinged, roll-out, drive-in, in-door, overhead sliding structures.

"Harmonic"

Folding folding doors are very stylish and functional. They are perfect for those who have small and small apartments. They are very compact and take up very little space and move along the rails on special rollers.

Door leaves are called slats. They gather on the side and fold down like blinds. Moreover, it can be not only soft models, but also denser and more reliable wooden and aluminum ones. Folding doors can be presented in the form of "books". These are slightly different designs with larger door leaves. They are somewhat reminiscent of screens.

Usually books have 2 or more large canvases.

"Accordions" allow you to select several different functional areas in the room. Moreover, they can be installed both in rooms decorated in modern styles - Hi-Tech, minimalism, and more classicon the design of the premises. So, there are models for the kitchen, bedroom, nursery. They also equip the entrance to the study, and in this case, glass models are often preferred.

"Accordions" are one of the most inexpensive among all sliding doors. Their cost will vary depending on the design, material of manufacture, and also on their size. Usually they are used for wider doorways, since these structures themselves are quite long.

Coupe

Sliding sliding doors are gaining popularity every year. They look more strict and restrained in comparison with accordion doors. They are installed both in the office and at home. Sliding doors also take up very little space, so they are perfect for installation at the exit to the corridor or into a small kitchen.

Sliding doors have better sound insulation compared to accordions.That is why they are often installed in the study. Thus, extraneous sounds will not distract you while working. They perfectly save space in any room. They can be easily assembled by hand. The door leaf can be hidden in the wall after you open the door.

There are also models that are superimposed on the wall surface like a panel. This option looks very fashionable and unusual. These designs have two possible uses. So, they can completely replace any swing doors.

In addition, some use sliding doors as wall panels. Their installation does not require the installation of a door frame and thresholds.Therefore, the process will take very little time and effort. It will also be much easier for you to find the right floor covering.

Sliding doors belong to the middle price category. Their cost varies depending on the design and construction features. The average cost is 8,000-10,000 rubles.

Pencil case

They got their name due to the fact that they look very similar to an ordinary school pencil case. They are very compact and therefore also save space in the room. Manufacturers offer a huge number of models of different designs and configurations, so they can be selected for any type of room and doorway.

They are very dense and absolutely do not let in noise, extraneous sounds, so they can also be installed in office premises. This is due to the peculiarity of the method of their fastening, which distinguishes them from other similar sliding models. They also move slightly differently along the wall.

As a rule, sliding pencil cases have glass inserts and unusual patterns and interesting designtherefore are in high demand. They move completely silently and therefore do not distract people in the room. The design feature is the obligatory presence of a closer, which also ensures smooth movements. They are the most compact of all sliding models.

Portal

Portal structures are most often made of plastic. This is a very stylish and unusual design solution. It allows you to play with the light in the room and skillfully save space by visually expanding it. These are quite original and unusual solutions that can diversify any interior. Most often they are used to fill doorways of great height and wide in size.

The door leaves are hinged. The frame inside has rails along which the panels move. When you open the door, the hinges unfold, and the sash goes inside the room. The hinges, together with the sash, move along the slats along the wall.

Such doors can be fixed in any position, which is an undoubted advantage of this design. When you close such a door, the hinges fold, and the door leaf returns to its original place.

Types of canvases

All door leaves differ depending on the number of leaves. The dimensions of the door leaf also play an important role. The most common and classic are single-leaf sliding models. As a rule, they are purchased for narrow spaces. These are fairly compact models that slide to the side and take up very little space in any room.

There is no need to install a door frame to install single-leaf sliding doors. But for this you need to make a high-quality doorway. Single-leaf canvases are fixed to the bottom of the doorway. There are also models with a top rail.

Another common option is double-leaf interior doors. They are suitable for fairly large doorways. These are very stylish and functional designs that perfectly fulfill decorative functions. As a rule, double-leaf models are installed in large rooms.

They consist of two identical canvases. You can fix one canvas and use the other, or spread both canvases at the same time when entering and leaving the room.

There are even tricuspid models, which are often installed as an interior partition. They can also be presented as a screen. They look more massive than double models.

The more the number of leaves in the sliding door, the smaller the size of the door leaf.But there are also quite large models with a wide door leaf. These include radius structures, in which the canvases are located in a circle and move along the rails. It can be both accordion models and conventional folding folding doors. Also popular are semicircular and telescopic canvases, as well as cascade models with a lattice.

Doors that are installed at the entrance to the room have different size... The average door leaf is 1 m wide, wider entrance structures can be up to 2 m in size.The standard height is also 2 m.But in case you have higher or lower ceilings, as well as wider or narrower doorways, you can make a custom-made sliding door based on certain parameters.

Manufacturing materials

Sliding doors are made from a wide variety of materials:

Such models can have wood frames or are completely made of wood. Solid door products are very reliable and quite large. This material is also reflected in their price.
Models from fiberboard, chipboard are considered cheaper. Such doors include wood and other synthetic joining components. They are also completely eco-friendly, but they are lighter in weight than wood. This design is easier and quieter to move along the guides.
Veneer products are also very popular. Outwardly, they completely repeat the solid wood models. Inside, they have a different, lighter unnatural filling.
Plywood models are quite lightweight and durable. They are very often installed in doorways at the entrance to a room. Models from MDF serve for quite a long time.

The most unreliable are plasterboard sliding doors. They are lightweight, but very short-lived. Most often they serve as decorative partitions or screens.
Reliable are aluminum structures that have glass or mirror inserts. As a rule, the role of the base in them is played by an aluminum profile. They reliably hold such a seemingly fragile structure.
Glass doors look very luxurious and elegant. They fill the room with lightness and light. To create such structures, tempered glass is used. They are quite heavy and large, but very difficult to break. This is due to their thickness and quality of such products.

Also, glass doors can have a wooden door frame. It is these models that are the most reliable. They are capable of creating excellent sound insulation. Sliding doors are also made of polycarbonate.

Iron sliding doors are considered quite reliable and massive. They are most often installed at the entrance to the premises. Sliding door components are also very often made of iron.
Wooden handles can be fitted on wooden models. All furniture fittings in this case must be of high quality. It must be securely fastened to door structure.

Functions

Interior sliding doors should perform not only the function of restricting the entrance to the room, but also solve many other problems. So, models with noise insulation are very popular. They allow you to close in the room and get rid of extraneous sounds. Such structures are often installed in office premises or study rooms, since extraneous sounds in this case can interfere with work.

In this plan good option are sealed doors. They not only create sound insulation, but also completely impervious to odors. Such structures are often installed in the kitchen in order to prevent impregnation of the upholstery. upholstered furniture odors that may come from the kitchen.

Insulated doors do not let air out of the room. They are often installed in bathrooms and toilets. They are great for taking baths and other water treatments and perfectly keep the warmth inside the room.

In addition to being installed at the entrance to a room, sliding models are also used for zoning space. These can be sliding partitions or radius structures. This feature is very important for owners of studio apartments. Sliding partitions allow you to divide the room into several functional areas and limit them from each other.

Pros and cons

Sliding doors are rather controversial designs as they have both disadvantages and advantages:

The main advantage is their versatility. They can be installed in absolutely any room, regardless of its purpose. They can be installed not only at home, but also on the street and even in shopping centers.
The big advantage is the presence of the function of automatic opening and closing of doors... It is an innovative technology that makes life easier. Such doors are known to have a sideways sliding structure. That is why they do not react in any way to drafts or gusts of wind. They themselves will not slam shut and will not move in any way. Also, for this, a convenient latch is provided, which allows you to fix the door in a convenient position.
Another advantage is no noise when closing and opening the door, which can not be said about the flapping swing models. They are also lightweight so they can be easily moved on rails. Even a small child can handle such a door. The big advantage is that such doors can save space. You will not need to provide a plowing space when you make repairs.

Some swing structures furniture fittings spoil the adjacent walls, but such problems do not happen with sliding models.

These doors are completely safe and very comfortable. So, during the opening, you will not hit anyone by unexpectedly entering the room. So you will protect your children and pets, because the sash does not open backhand, but sideways.

But despite all the listed advantages, the design also has a number of disadvantages:

So, by themselves, these doors do not provide for the installation of mortise locks. Therefore, if you want the door to be locked, you will need to use a different design.
Another disadvantage is that these doors cannot provide a high level of thermal insulation comparable to classic models. That is why such products are more often installed indoors than at the entrance to the house from the street. They also provide less sound insulation.
For housewives, a significant disadvantage is that the niche into which the sliding structure is recessed collects a lot of dust. And it's pretty hard to reach places, cleaning is difficult here.
There is also the possibility that at one point the sliding door will jam. Especially this probability increases if the rollers are askew. That is why it is necessary to select a model with only the highest quality mechanism and periodically check its serviceability.

How to deliver?

Sliding doors are fairly easy to assemble yourself. The assembly will not take much time. This can be done using a simple scheme, but first you need to prepare:

First of all, you need to take all the necessary measurements to determine the size of the door leaf. Moreover, about 5-7 cm must be added to all measurements.
You can buy ready-made canvases for your measurements, this will greatly simplify the work.
When you have made all the necessary measurements, you need to draw lines that will mark the future door.
To the top line you need to attach wooden bar, and its lower part should be located slightly higher. The length of such a bar will be equal to double the width of the opening. It must be secured with a self-tapping screw.
After that, you need to fix the profile. He will act as guides. This must be done in such a way that the sash and the wall together form a free space. This is necessary so that the door subsequently slides quietly along the wall. The profile should be perfectly straight and in a straight line.
Then you should come to collecting the carriages. Once they are assembled, you will need to test how the canvas moves smoothly. When assembling, the carriages are separately inserted into the pre-assembled profile and moved.

Don't forget to put in the restraints and seal. They need to be positioned along the edges of the profile.
Then in the door leaf you need to make a mount for the carriage. It should be centered. After you install all the fasteners, you can install the door leaf. It must be placed tightly in profile and slightly raised.
After that, you need to fasten the brackets to the bolts with nuts. But try not to tighten them too much.
Then you should insert the door leaf into the bottom guides. But before that you need to loosen the bolts on the carriage.
After that, you need to hide the profile with decorating platbands. Do not fasten them too tightly. After that, you can proceed to the installation of accessories.

For information on how to install a sliding interior door, see the next video.

When choosing sliding doors, you should pay attention not only to their appearance, but also to their characteristics:

Plays a very important role soundproofing, because it is this quality that is lagging behind this type of door. Worst of all, pine models are saved from extraneous noise.
Pay attention to the material. It is better to purchase only natural products that meet all standards, since they are the most environmentally friendly. Try not to skimp on such products, as this way you can shorten their life.

The door must harmoniously fit into the interior the room where you plan to install it. The doors at the entrance to the living room should be the most luxurious and massive. Sliding doors to the hall can be purchased from solid wood, especially attention should be paid to products made of larch and ash. It is better to install more dense opaque models in the hallway, in the corridor and in the pantry.
But if you want to fill the hallway with light, then glass model can be chosen... It can visually expand a narrow corridor. The glass door is perfect for the kitchen and goes well with the shallow household appliances... Consider wall coverings when choosing these doors.

If you want to install sliding doors in a studio apartment, try to get the same designs so that they create a harmonious ensemble. Also in the kit for such a door you need to choose the most suitable and reliable fittings.

Interior design options

A door in any room is one of the most basic elements. It should complement the interior of the room:

In some small apartments, doors are even installed instead of a wall. This option is also suitable for zoning, so such a door will play a major role.
If you are installing a structure in a room decorated in a classic style, it is better to purchase elite matte models. Gloss is unacceptable for halls and living rooms. Large white interior doors with luxurious decor are best suited for such rooms.

If you want to install a door on a loggia, then panoramic models are perfect for you. In this case, you can give preference and designs in the form of a mosquito net. They are perfect for the warm season of the year. Lattice doors can also be used.
It is better to install beautiful elegant models in the bedroom. These can be glass opaque products that reflect the classics. For wide and spacious rooms decorated in a modern style, frameless transparent doors can be purchased. This is a great solution for minimalism style.
The dressing room is suitable for soft sliding screen doors. You can also use models with a mirror. Reviews show that they are very comfortable in such a room. Descriptions of such options in the interior are always enthusiastic.

In the design of sliding models, the frame plays an important role. Frameless models look simpler and more modern. And products with frames are more luxurious. In this case, you can give preference to models with a wooden frame in the color of wenge.

Recently, in addition to traditional swing doors, which are familiar and understandable to the consumer's eyes, such non-standard optionlike sliding interior doors. They are increasingly being installed in different rooms - for example, when zoning or for special allocation of a certain part of the usable area.

Since sliding models look nice and cozy in any place (they can even be used for a pool and a bathroom), you might think about how to install them in your own home.

Pros and cons

The main advantages of sliding interior doors are significant space savings, external beauty, neatness, aesthetics and ease of use. Since the mechanism implies easy movement of the doors along the guides, it is very easy and convenient to open and close such models.

However, when installing a simple sliding structure, the owner should take into account the fact that it will not be able to provide the room with full-fledged sound insulation - unless - when installed behind a false wall, when it comes to inexpensive options.

Sliding doors can keep warm, but much worse than ordinary ones, so you should not install them in the corridor or hallway as entrance doors.

The mechanism itself and the installation of sliding doors are not cheap, if there is a desire to insulate them, or to provide a decent soundproofing effect, you will have to spend a lot of money, but in many cases it justifies itself.

Design, device and accessories

The principle of operation of such systems is of two types.

There are parallel-sliding modelsthat include more than one sash. In this case, the door leaf moves parallel to the vertical surface. If sound insulation properties are important for the buyer, it is recommended to install this type of structure. In addition to such a reliable and monolithic model, there is an even lighter type of doors called folding-sliding doors. It includes a certain number of canvases, which in appearance are very similar to an accordion.

Such a soundproofing model will not give, but it is she who is the most optimal for zoning space (for example, in a one-room apartment).

More simple folding-sliding system often comes complete with top rail only. The weight of such a structure can be considerable, especially if the canvas is made of polycarbonate or glass, so you should stock up on reliable high quality fittings in advance.

The complete set of a standard set of interior doors usually includes the following elements:

guide runners (or lower and upper profiles), the length of each of them is 2000 cm;
canvases, they must be securely fixed on rails and rollers, therefore, a certain number of them must be included in the kit. It can be different and depends on the type of door structure;
fasteners;
suspension, the required number of accessories and platbands - usually with a margin;

ready-made door panels or sashes (either "accordion", or classic, monolithic models);
decorating strip to hide the mechanism on casters, with entry in a box or in a box;
limit stops;
lock and cassette (several pieces) - in order to hold the leaves in the desired position when they are in open position;
handle and lock with the possibility of embedding into the door leaf.

Inline sliding doors, depending on the model type can be with or without a threshold... Also, many manufacturers offer to purchase additional accessories. For example, a mosquito net, in case it is planned to install a sliding system on the terrace, and those buyers who dream of insulated doors may be offered a special seal.

System types

Like other door systems, sliding doors are also divided into several types based on how they open and close: the doors are folding, sliding and sliding.

Rollback (or rollback) systems.Usually they look like a canvas with one sash, for the movement of which special hanging profiles are attached, moreover, in one direction or the other. The width of the structure for doorways is no more than 900 mm. This is an overhead model with a hinged type of fastening mechanism - at the same height, which in total is the height of the rollers and the clearance during installation.

Sliding (or sliding) models have a similarity in the principle of installation with rolling structures. Such doors can move in different directions, as well as by opening each sash in turn. If you wish, you can equip such a model by the action of the chain mechanism of its opening, as in wardrobes: if one sash moves, the other automatically follows it.
Folding or folding - the same "accordion", which is most often used as a partition door or screen door, separates the required space in the room. They open in the same way as the previous systems, moving along a special profile guide with a roller mechanism. The difference from other models is that their canvases are not sliding, but folding, consisting of several lamellas. Fold in one-sided way, using loops. The main plus of the "accordion" is that it is very compact, but handling such a door should be as careful as possible.

If the owner wants to give the doors additional noise and sound insulation, they can be installed with porch... In this case, the canvas will be even quieter and more airtight. Also, for maximum convenience and ease of installation and operation, sliding models with telescopic mechanisms are often installed: the sash moves only in one direction, which can be especially convenient in rooms with a non-standard layout.

What are the types

Sliding doors with one leaf are installed in small apartments not only for the sake of saving space, but also for the purpose of making the interior look cozy and neat. Installation is very simple, there is no need to install a door frame, but the opening itself will need to be strengthened and a good finish.

Such models are attached to both walls and ceilings - the supplied fittings provide for one or another type of fastening. As a rule, the structure itself is quite light, often single-leaf panels are frameless, vertically sliding. Also recently, a Japanese-style lattice door has become very popular. She perfectly zones the room and, at the same time, decorates it.

Bivalve

Internal double-leaf interior structures are mounted in wide openings, differ in functionality and ease of use. They look ideal in rooms with a large area, and also play a decorative role. They consist of two panels, which, based on the installation possibilities, can simply move along the walls, or be retractable into the wall, hidden when opening. One half of the panel is easily stopped by a latch so that it does not interfere, while the other can be used.

The fixed canvas will advantageously hide the room, and the undercarriage will perform the main function.

Tricuspid

Three-leaf doors are very easy to use and are installed if the room has wide openings of non-standard sizes. Three doors successfully block any opening, and for profitable zoning, you do not need to build an additional wall. Thanks to the installation of the opening mechanism at the top, the space gains visual integrity. The undoubted advantage of three-leaf models is that there is absolutely no need to install floor rails here.

Three-leaf sliding options are often made on the principle of cascading canvases, each of which has its own rail. When they open, they overlap, and it looks very beautiful. The doors are installed differently: for example, one of them stands in the center and moves in different directions, going in turn behind the other two, permanently mounted. At the request of the customer, it can be done exactly the opposite: the side flaps move, and the middle stationary canvas can perform a panoramic function of decorating a room, a drawing or a beautiful stained-glass window is often performed on it.

Pencil case

A pencil case is a very interesting and useful type of sliding structure. It got its name based on the technical features in operation. Roll-out canvases with noise insulation move along the walls like a school pencil case. They are versatile in that they are successfully used in a wide variety of premises, from offices to residential. A pencil case door takes up little space, and its design and equipment can be assembled and formed at the request of the customer.

Semicircular radius

Semicircular radius doors represent an original and, perhaps, the most beautiful and aesthetic invention of design minds. It is a large and wide structure with a convex plan, often glazed, with certain types of decor on the panels. Unfortunately, this swivel / slide model is not designed to be installed in small spaces. Its main purpose is to add coziness and beauty to large areas of supermarkets, large country houses, offices and apartments with high ceilings.

Intra-door

Functional interior doors are a model with elements built into the opening, which provides both aesthetics and additional benefits. The leaves move towards each other along the opposite track, while ½ of the doorway remains free for entry and exit. Moreover, the location of the opening itself can be changed at will.

"Accordions"

Sliding partition doors can be made in the form of a light "accordion" made of plywood or plastic. There are whole systems of internal partitions, including corner ones, the number of panels in which can vary from two or more. To give the structure special strength, aluminum is most often used as a material, and the sashes themselves can have glass inserts or made of any other transparent material.

The multi-leaf interior partition works on the principle of moving the opening to the left or right. Their sliding system is absolutely silent and soft, and the closer allows you to close them as tightly as possible.

Lift-slide HS-portal

Lifting and sliding models of the HS-portal type include movable and blind canvases. They are designed to cover large doorways. It is such a portal structure that can provide a completely open space, devoid of both canvases protruding from the wall and inconvenient vertical racks, which are often indispensable when installing three or more panels.

Thanks to the portal principle, you can completely remove the boundaries between the rooms at any time, turning the room and the terrace into one, and, if necessary, close the doors back. Such designs can be warm and even double, to ensure the retention of heat in the cold winter. It is very easy to operate such doors, despite the fact that they can weigh 300 kg or more.

Dimensions

In accordance with the GOST standard in Russia, the optimal door panel height is 2000 cm, and the width of models with one leaf is from 600 to 900 mm. Most of the manufacturing firms are trying to produce their products with an orientation towards these indicators, so choosing the right set is not difficult. A plus of standardization can be called a lower price for such a set of canvases and fittings, however, given the fact that in the overwhelming majority of cases they do not adhere to strict dimensions during construction, you still have to order doors by individual sizes.

Large doorways, typical of hypermarkets and large private mansions, have non-standard dimensions, for the removal of which it would be best to invite a specialist so as not to be mistaken. If non-standard wide doors are ordered, it is important to take into account the gap in order for the leaf to open and close well, while the leaf itself should correspond in width to the dimensions of the side walls.

Custom designs can be different: light or heavy. Usually, the large weight and thickness of the blades is not a problem, because the control mechanism allows you to minimize the technical side. All doors are of the original shape (light arches for narrow aisles in utility room, canvases of great height with transoms, as well as all bay windows) are made only individually, and the price for such an order will be much higher.

Materials

Various materials are used in the production of sliding doors.

Metallic

Various options for interior partitions for government and medical institutions are often aluminum or iron.

As a rule, such a structure does not look too heavy and has good strength indicators. Aluminum and iron are highly resistant to external weather conditions. Partitions made of aluminum are often used for glazing loggias and balconies. The sound insulation properties of these materials are quite high, and if a good seal is used, it will provide both heat retention and sound insulation at a high level.

The service life of aluminum partitions is 50 years or more. Perhaps, over time, they will need a new cosmetic color.

Wooden

Wooden products or canvases from different arrays will never go out of fashion, and a sliding structure made from natural materials will always look rich and stylish, especially in the living room or in the hall. Such models open up space for craftsmen for creativity as wood carving and creating different types of doors: from blind frameless to models with figured glazing.

Natural wood is an environmentally friendly and durable material, provided it is carefully cared for.

However, sliding structures of this type are very heavy, so be sure to remember that the fittings selected for them must be of the highest quality and with increased strength indicators.

Of course, if you plan to install exactly wooden doors, it is important to properly care for them so that they do not darken and do not crack ahead of time due to temperature changes and a sharp change in weather conditions. You should first consult with specialists about which wood care products should be used.

MDF

The most common and inexpensive material, from which a good sliding structure can also be made, is the fine fraction of wood or MDF. In terms of environmental characteristics, it is not inferior to natural wood, and its surface can also be decorated different pictures and applications.

The advantage of MDF panels is that, unlike wood, they weigh very little, and therefore there is no need to purchase expensive and reinforced fittings.

Of course, the service life of such doors is much shorter, but with careful operation, this option can also become acceptable.

To give the panels additional beauty and create the effect of expanding the space, mirror inserts of various shapes and sizes can be cut into them. It looks very beautiful and attractive, however, it also requires a strong mechanism and reinforced fittings due to the fact that mirror inserts have additional weight. As for more simple models sliding doors, if you wish, you can independently make an interior prefab from drywall or veneer, sanding it "antique" or painting it in the desired color.

Colors

Thanks to modern technologies, the color scheme of any design, including sliding ones, has no strict restrictions. Depending on the material used, you can choose a product for every taste and color.

The main thing is that it is combined in scale with the main elements of the interior, and the overall picture looks harmonious and holistic.

White color is relevant for aluminum partitions, often used in medical offices, but if it is painted with sliding wood panels leading to the bedroom of a residential building, the effect will be very delicate and "homely". Of course, if you plan to install panels white, it is important to make sure that the entire space around, from wallpaper to furniture, breathes lightness and romance.

Wenge-colored sliding structures will always look massive and solemn, especially if the doorways are wide, and high windows and ceilings prevail in the room. This color is best used in large rooms, where there are already large pieces of furniture, designed in a classic style.

Styles

As you know, the belonging of doors to one style or another most often determines the nature of the material from which they are made.

Massive blank panels made of natural wood of dark shades can be safely attributed to "Classics". Classic style, in spite of its severity and not always obvious affordability, will never go out of fashion and for many years will delight its owners with the severity of lines and sliding interior models "adapted" to its elements.
Discreet modern hi-tech style involves the use of glass doors in combination with inexpensive polymers or metal. Also, eco-doors made of bamboo, upholstered with leather or leatherette, will organically fit into what is called modern trends.
If you use such a versatile and lightweight material as MDF for the manufacture of panels, you can make an excellent option, aged at mediterranean scale.

Traditionally, and a very long time ago, Japan is considered the first country in which sliding doors were once invented, therefore there is a so-called "Japanese style room design, reminding of where such a convenient and functional invention came from. Sliding interior options in the Japanese style can be lattice, matte, decorated with intricate bright ornaments in the form of mythological animals and even embroidery.

Design

As for modern design solutions, if the very first sliding models sometimes looked artisanal and primitive, now this is no longer there, thanks to the development modern technologies production and bold and functional inventions of designers.

The style of the room must be determined even before the door kit with all the necessary fittings is purchased.

Possibility individual order will always help in the best way possible to determine the style and technical featuresthat will have to be taken into account during installation.

Any wood material can be suitable for the manufacture of classic interior doors - the question is how the owner of the premises wishes to "complete" the doorways. If the area of \u200b\u200bthe room allows, you can partially install conventional swing models, and in those places where the area is limited, you can install a sliding structure.

In large private houses, sliding models are most often installed in the kitchen. They are made of durable glass, which provides both ease of use and ease of maintenance. Glass models are also used in office premises - for the same reason as in kitchens: ease of maintenance, practicality and, importantly, additional penetration of natural light - in working conditions it is always necessary for employees. Glasses with a matte finish and unpretentious patterns will decorate any room: from an office to a home kitchen, and the shock resistance of modern glass will provide such options with the longest possible service life.

A door with a mirror will not only visually increase the space of the room, but it will also be the best solution to the problem if the room is small, and it is impossible to install a separate mirror in it for one reason or another. In addition, a large mirror takes up a lot of space, and a small one is often not very useful if a person needs to see himself completely from head to toe.

It is in this situation that you can mount a large mirror panel in a sliding sash, making sure to provide the necessary gap so that the mirror surface is not damaged and not scratched during its constant movement.

Mirror inserts can be used simply as a decoration. For example, MDF panels make it possible to slightly weight the structure without harm to the supporting-bearing mechanism. For owners prone to mysticism and Mediterranean motives, we can always offer a stained-glass design for the front fixed panel of wide three-leaf doors. Modern stained glass decorations are made of durable materials, they do not fade in the sun and do not make the structure heavier, and when executed by qualified craftsmen, they sometimes look no worse than old ones.

Beautiful options for models in the interior of the living room

Of course, when it comes to installing doors in a large private house, there are rarely problems with the concepts of beauty and functionality. As for small-sized spaces, installation options for sliding interior structures in this particular case seem to be the most popular among ordinary buyers.

If there is a recess in the "Khrushchev" in the form of a niche, the best option there will be doors that enter the niche on runners designed in accordance with the dimensions of the recess. When installing doors made of lightweight polycarbonate into the closet, a functional partition will be created with an insulating role assigned to it.

In addition, the "Khrushchev" can be decorated with a solid interior "accordion", which does not take up much space, unlike a swing door, and the passage to the kitchen will always be free.

Various models of interior partitions, many of which can be made independently, will help to optimally organize the space of a children's room, in which both a boy and a girl can live at the same time. With the help of such a partition, you get two small but full bedrooms.

If a person lives in a one-room apartment, in which it is not possible to build a full-fledged dressing room with a place for changing clothes, the partition can also fulfill a "saving" role, allotting for this a certain part of the room.

When living in a studio apartment, combined with a kitchen, a high screen will become a universal separator that will not only prevent the spread of odors throughout the room, but will also hide dirty dishes and other unsightly things in the form of garbage and food waste from guests.

Thus, sliding interior doors can be installed not only in large houses and offices. Since now there is an excellent opportunity for their manufacture and installation on an individual basis, such a convenient design can be fully adapted to the needs of the economy class.

How to install sliding doors yourself, see the video below.