DIY tulle chandelier. DIY original chandeliers: lighting ideas, detailed instructions with photos. Luminaires for different rooms

Interior design would be incomplete without lighting. The right light fixture can completely transform a room. To show your individuality and creativity, try making a DIY chandelier. There are no restrictions on the choice of materials. Get inspired by the ideas of handmade lamps in different styles, three detailed master classes will help you to make a unique decor item with your own hands. And hints on connection and installation will help with installation.

The first step is to decide on the material that you will use as a basis:

• old chandelier;
• all kinds of rings, hoops, frames - for the frame;
• elementary paper lampshade;
• natural materials;
• other.

The easiest way is to use as a basis an old unnecessary chandelier, which has already served its purpose. Such restoration will help to look at this rarity in a completely new way and prolong the life of the lamp. There is a clear advantage in using old frames: the basic elements such as the frame, the fixing and the entire wiring are already ready. You just have to do the design without thinking about any technical issues.

The rest of the materials will require more attention to the connection of wires and cartridges. Homemade chandelier lamps on a flat round or other shape of the frame can be of any size, made in different styles and techniques. The principle of manufacturing is simple: various decorative elements are attached to the frame around the perimeter: beads, fringes, paper and cardboard figures and various unusual things. It turns out spectacularly.

Another easy way to make a DIY chandelier is to use a paper lampshade that you can buy at a store. Lampshades come in different sizes and colors, you need to choose in accordance with your idea. You can use several of the same lamp shades to create one lamp - there will be a place for fantasy to roam.

A paper lampshade costs a penny, and there are hundreds of ideas for transforming it!

The use of natural materials has become a new trend in interior design. Creative ideas using branches, roots, cones and other improvised means are becoming more and more popular and find a place in different styles of design.

An ordinary branch in skillful hands turns into a Scandinavian-style lamp

If there is no suitable frame, you can always take a coil of wire and make a base from it for a chandelier of the desired shape. Another option is not to use the frame at all, replacing it for a while with a balloon.

Video: DIY chandelier-ball made of threads

What chandeliers can you make yourself

You need to choose ideas for creating a ceiling lamp depending on what style you have chosen to decorate your home. Approach the question responsibly, look at the photo of the original handmade chandeliers, and choose the most suitable lamp for your interior that you like.

Homemade boho lamp

The boho style, popular nowadays, is perfectly suitable for hand-made lovers. It is a free style that features a variety of materials, colors, textures and shapes. Everything is possible in such an interior, and the chandelier should be its highlight.

Artificial flowers will decorate any craft

A bit of fringe and hot glue - fresh and original

Fringe is a favorite element of boho fans. When creating a chandelier with your own hands, this material will come in handy. Moreover, there are all kinds of fringed braids on sale, which further simplifies the process.

In order to make a boho lamp for the ceiling, take several rings of different sizes, connect them in decreasing order and decorate each one with braid. The original chandelier is ready, it remains to fix the cartridge with a wire.

Alternatively, instead of a ready-made factory fringe, you can use variegated or plain ribbons, ribbons and threads. It will take a little longer to tinker, but as a result you will get one-of-a-kind homemade chandeliers.

Even old T-shirts and dresses cut into strips are suitable as a braid.

Retro and vintage

Homemade chandeliers and lamps fit into the interior in vintage style quite organically. The most suitable option in this case is a converted chandelier of those times. It can be found in your grandmother's house or at a flea market for a penny. The main thing is that the device works. But even if it doesn't work, it doesn't matter, you can always fix it.

The following decorative ornaments are suitable for a vintage lamp:

• crystals;
• beads;
• lace;
• feathers.

Remove the old shades and decorate the frame with prepared plastic crystals.

Important! To keep the picture solid, use old-style light bulbs - representing candles. A retro chandelier will lose its charm if you screw spiral housekeepers into the sockets.

Fringe with feathers, glued to a round paper lampshade around the perimeter, will turn the lamp into something weightless and airy. Such a DIY chandelier for a home decorated in vintage style will become the center of the composition. Start gluing from the bottom tier, gradually going up. Your task is to hide the attachment points with the next layer of feathers.

Such a lampshade will suit both a retro interior and a modern home decor.

Another essential attribute is lace. But how to make a lace chandelier with your own hands? A balloon, PVA glue and grandma's lace napkins come to the rescue. If you know how to crochet, you can make some delicate napkins specifically for this purpose.

Take several knitted items, saturate them abundantly with PVA glue. Don't worry, after drying the glue will become clear and not noticeable. Take a balloon of the right shape and size. Lubricate the surface of the ball with a fat cream or oil and gently glue the napkins.

Your shade can be in the shape of a ball, then you need to start gluing from the bottom. The central element of the first napkin should be exactly in the center of the luminaire. If you need a slightly open shade, start with the side surfaces.

After the glue is completely dry, air must be released from the ball. Remove the ball and the shade is ready.

The idea is ridiculously simple, but how effective!

Experiments with lamps in the nursery

Often, when making repairs in the nursery, parents cannot find a chandelier that the child would like and look good in the interior. If you find yourself in such a situation, learn how to make a DIY chandelier and create the lamp your child dreams of.

Many girls dream of a room that looks like a fairy or princess bedroom. A magical chandelier of rose petals floating in the air will be a good addition to a fabulous nursery. Use an old floor lamp shade as a base or make a steel wire frame.

Ready-made artificial rose petals that can be found on sale are suitable as a decor. Another option is to make the petals yourself. To do this, you need a thin fabric of the right color that will not peel off at the edges. Of the tools, scissors and a needle and thread are enough.

Cut round petals according to the prepared template. Connect them with a thread to make garlands. Attach the resulting threads to the frame around the entire perimeter. In the center of the frame, make a wire base for the holder and a hanger for fixing to the ceiling.

This chandelier is as light as a ballerina and as delicate as a feather.

If you have a glue gun, DIY lighting fixtures are not a problem. A cool idea for a nursery is a colorful chandelier made of plastic cups. Glasses should be made of durable and transparent plastic. These are often found in party departments next to balloons and hats.

The work of connecting the elements is quite meticulous. Start from the middle. Select the diameter and connect the required number of cups in a circle. Pull up rows one by one until you reach the top of the lampshade. Then turn the piece over and repeat on the other side. The bottom of each glass should be facing the center of the sphere. In the middle, there will be a fairly large space where you can easily place a light bulb.

DIY children's lampshade - everything is very simple

Simple lamp ideas for a couple of dollars

A very simple but at the same time cute idea - a plywood night light. The choice of shape is limited only by your imagination. The plywood figure is mounted a short distance from the ceiling or wall, and behind it is a light bulb. The result is a subdued diffuse glow around the dark silhouette.

A popular option is the cloud. Cut out a cloud from plywood or chipboard; for a beautiful composition, you can make a few more reduced clouds. Paint the clouds white with acrylic, non-toxic paint. Attach the metal U-shaped pieces to the cloud on the back. Take out the wires and connect the socket. Then screw your cloud to the wall, hiding the wiring and light bulb behind it.

You can make such a night light chandelier with your own hands in just a couple of hours.

IMPORTANT! Please note that any homemade chandeliers can only be used with those types of bulbs that do not heat up during operation. Diode lamps are best suited. They do not heat up, shine brightly and consume little electricity. In addition, the variety of shapes allows you to choose a light bulb even for the most original lamp.

A simple and traditional way is a cylinder lampshade. These are often found on old floor lamps. The upper and lower edges of the plafond are formed from two identical circles. A cloth or paper is pulled between them. Depending on the color and the presence of a print, the same chandelier model can be presented in completely different styles - from ethnic motives to minimalism.

Such a lampshade can even be made from a piece of wallpaper.

A simple but effective idea is a spider chandelier (photo below). Its zest is in long wires that do not hide anywhere, but, on the contrary, serve as a decoration for the ceiling. They resemble the long legs of a spider, which is why this model is so named. A cartridge is connected to each wire, and a light bulb is screwed into it. The wires spread across the ceiling in all directions, fasten at anchor points, and hang down. Bold and extraordinary, very simple to perform.

The lamp really looks like a large spider with thin legs.

The most original ideas for the brave

In principle, in order to make chandeliers for the house with your own hands, any object can be used as a basis without exaggeration. Turn on your imagination, and you will understand that any thing can be creatively played.

Old wooden clothespins? What is not an idea for a homemade lamp! The principle is the same: frame, decor, fixing the cartridge, fixing to the ceiling. The result will exceed your expectations. Such a chandelier will decorate a loft-style interior. It looks very original.

Wooden clothespins - stylish and sustainable

A skein of thread and a flower basket? Perfectly! Don't be afraid to experiment. Cut the threads and tie them to the top of the basket. Tie a knot from the bottom, adjust the drapery a little, decorate with beads to your taste and attach to the ceiling, where the wiring is already brought out and the bulbs are connected.

All ingenious is simple, and this idea is proof of this

Pompons, origami figurines, Christmas tree decorations, beads, dishes, a tea set, cutlery, CDs, all sorts of scraps, scraps - if you wish, you can transform this trash into a stunning lamp.

Step-by-step chandelier making workshops

For those who want to try DIY chandeliers, we offer original ideas and a step-by-step guide. The most popular and successful lighting ideas are discussed in more detail. If you follow the recommendations and put in a little effort, it will turn out just like in the photo, or maybe even better.

Chandelier made of plastic bottles

Some people think that used plastic bottles should be sent to landfill or, in extreme cases, to a recycling plant. But some needlewomen don't think so. Lampshades are made of ordinary green, brown and transparent drink bottles.

Fantastic lamp can be made by hand

Such a chandelier made of plastic bottles in the form of leaves can also settle in your home. To do this, collect the necessary materials and tools:

• bottles of several colors;
• scissors;
• thin wire;
• awl;
• soldering iron;
• wires;
• cartridge;
• switch.

Tools and materials

Chandelier making and assembly instructions:

1. Draw a leaf-shaped stencil. It is better to do this on thick cardboard.
2. Cut out the resulting sheet.
3. Place the stencil on the plastic and circle it with a pen. Find the optimal position of the templates so that there are as few cuttings as possible.
4. Cut the same plastic leaves of all colors. The edges of the leaves may seem overly sharp and sloppy to you - don't worry, we'll fix it soon.

Chopped leaves

1. When the supply of leaves is ready, proceed to processing. A soldering iron comes in handy here. Heat it up and slide it along the edge of each element. The plastic will begin to melt and the leaves will round out.

It turns out pretty neat

1. Process all the details in this way.

You need to prepare a lot of leaves

1. Use an awl to poke holes in each sheet at the base.
2. Collect twigs from wire and leaves. Use different shades to make the branch look fuller and brighter. Fasten the wire in the holes in the plastic, try to make the branches thick to hide the wire behind the leaves.

Sprigs of wire

1. Let's start assembling. From small branches, collect large ones, connecting them together with the same wire, as if you are weaving a wreath. Shape the lampshade the shape you want. The wire is flexible, if something went wrong, it can always be straightened and trimmed.
2. At the base of the chandelier, make a wire mount for the socket.

1. Place the shade over the chandelier.

Luxury glass chandelier

Glass wine bottles can be used to create a unique chandelier for your living room or bar. The idea is large-scale - a powerful wooden base and a dozen bottles for lampshades. This entire bulky structure will be suspended from the ceiling.

Can a true wine connoisseur have another lamp?

What you need to make a DIY bottle chandelier:

• wine bottles - can be of different colors and brands, but similar in shape and size;
• boards;
• chains for suspension;
• self-tapping screws with hinges - for fastening;
• glass cutter;
• jigsaw;
• grinder;
• drill;
• stain;
• cartridges and wires.

The master class is quite complex, but detailed instructions will help you cope with the task:

1. Prepare bottles: peel them from labels, wash, dry. Mark the same height on each bottle. Use a glass cutter to cut the bottom off each.

Sometimes labels have to be soaked in water for better peelability

1. Tackle the boards. Cut them with a jigsaw into pieces of the desired size - be guided by the area of \u200b\u200bthe room and the number of bottles (in the example there are 10 of them).

Sawing boards

1. Sand the edges. The ends should be as smooth as the rest of the surfaces.
2. Stain the wood with stain. The color depends on your interior. The author preferred a dark shade.

You will get a deep noble color

1. Mark the installation locations of the ceiling bottles. They will be installed symmetrically in two rows of 5 each.
2. Using a wood drill with a wood bit, 25 mm in diameter, drill holes in each mark.

Hole drilling

1. At the corners and perimeter of the base from above, screw in the screws with hinges for fixing to the ceiling. Measure chain lengths to the desired length and connect to the base.
2. Install the necks into the bottle openings.

Bottle opening

1. Prepare 10 cartridges and connect them with cables. Thread each individual wire through the bottle so that 10 wires remain on top of the fixture.
2. The cables are connected in a circuit and insulated. Hang the chandelier by chains. Connect the electricity.

Ready made lamp from wine bottles

Pearl threads - a chic idea and implementation

Glamorous chandeliers in the shabby chic style or sparkling Swarovski - lamps made of stones and beads attract attention and make any interior festive. Making a chandelier from beads and rhinestones with your own hands seems to be something unattainable, in fact, the technology for creating it is very simple.

For such a bright and massive model, prepare:

• ready-made beads-garlands (sold in any department for decoration) or a large number of beads, fishing line and patience, if you decide to type the threads yourself;
• garden flower hanger or similar basket;
• acrylic paint in a spray can;
• knitting wire or special wire for making jewelry;
• glue gun and rods for it;
• nippers.

Necessary materials

How to make a lamp from beads with your own hands:

1. Prepare the beads. It is better to take ready-made beads (for example, to decorate a Christmas tree), otherwise you will have to tinker with stringing. If the color does not suit you, paint them with paint from a balloon.
2. While the beads are drying, take care of the basket. If it's rusty, brush over the metal. If normal or new, just paint.
3. The beads are dry. Now from several garlands you need to collect one long length. Connect the outer beads with hot glue.
4. Cut the wire with wire cutters into 5-7 cm pieces. You will need several hundred of them for such a chandelier.

The work is monotonous, but it goes quickly

1. Take a garland and one piece of wire. Clip the beads to the basket at the bottom. Continue to wrap the beads around the basket, securing the result with wire so that the decor does not move to one side.

DIY lampshade bottom decor

1. When the lower part of the basket is completely ready, they begin to decorate the upper half. Long strands are passed over the top of the luminaire and pulled through the top of the basket. Do not stretch the garlands, they should hang freely. Record them on each revolution.

Almost done - it remains to remove the remaining wire

1. If you did everything correctly, the beads completely hid the basket and the pendant chains. You can decorate the resulting masterpiece with ribbons, rhinestones or other elements.

Beautiful with or without ribbon is a matter of taste

Subtleties of installation and installation

Everything is clear with the design of the lampshade - there is a place for imagination and invention. But what about the electrical part? Indeed, without a correct and safe connection, not a single even the most luxurious chandelier will work.

We really hope that if you decide to make an electric lamp yourself, then you are familiar with the intricacies of installation and safety rules. But just in case, let's list all the important little things again:

1. Never carry out electrical work (even a banal replacement of a burned out light bulb) with the power on.
2. Do not hang the chandelier by the cable. The structure should be supported by a suspension: chain, rope, cable - anything, but not a work cable.
3. The light bulb should also not hang on the wire - because of this, breakdowns most often occur. Provide a holder-support for the holder at the base of the luminaire, so you take the load off the cable.
4. Use the indicator to identify the phase of the wiring. There is no need to do this "experimentally" by connecting the device at random.

Yellow wire usually means ground

1. Use double insulated three-core wire. The section is selected depending on the total power of the device. For a luminaire up to 60 W, an area of \u200b\u200b0.35 mm 2 is enough, up to 120 W - 0.5 mm 2, up to 300 - 0.75 mm 2.
2. Achieve good contact at the joints. Poor contact can cause the wiring to heat up, which is very dangerous.

Use a screwdriver to secure the cable in the holder

1. Incandescent lamps are not compatible with paper lampshades - this is a fire hazardous combination.

As you can see, subject to simple safety rules and a creative approach, anyone can make a homemade lamp. Photo ideas inspire to find creative solutions and an extraordinary approach. Your lamp will be a reflection of your personality and decoration of the room.

A chandelier in any room has long been not only a lighting device. It will not be an exaggeration to say that this is the piece of furniture that is the main decoration in any room.

Of course, a do-it-yourself chandelier will be an especially valuable thing. This will allow not only to highlight the special taste of the owners of the house, but also their creative mind.

Despite the fact that deciding to make a lampshade with your own hands for a chandelier, you will need to spend a lot of effort, because the process requires special concentration - for sure, the work time cannot be considered wasted, since the work will bring incredible pleasure and after that even a pleasant aftertaste will remain, and in the future you will definitely want repeat again this kind of work.

If you are thinking about how to make a chandelier, you have probably already seen that today you can use a variety of materials for this, and sometimes completely unusual ones. For example, very often a ceiling for a chandelier is made of wood or glass.

However, if you want something even more incredible, then you can also use cardboard, and wood skewers, and even wine bottles. The choice here depends solely on the ideas that the creator has, as well as on the various wishes of the apartment owners.

In addition, a chandelier made of scrap materials must also be created taking into account the overall interior of the room.

Chandelier made of plastic spoons

Disposable spoons, which most are accustomed to using exclusively for a picnic, in reality can also act as one of the simplest and at the same time easily accessible materials for everyone to create an interesting version of a chandelier in any room.

If you look at a photo of a chandelier of such a plan, you will be struck first of all by the variety of colors, and in the future it will be easy to understand that the material will last a long time.

In addition, in order to create such an interesting piece of furniture, you will need a minimum of financial and material investments.

What materials will you need?

• Any empty plastic bottle. The only condition is that its volume cannot be less than five liters.
• Any plastic spoons. Their number depends solely on the chosen size of the future chandelier.
• Glue that will allow the plastic to stick together.
• The cartridge is from an old, no longer working chandelier.

The process of creating an original chandelier

Prepare a plastic bottle. First of all, you need to get rid of the label and bottom, and also dry it properly.

Remove the plastic spoons and use a knife to remove any handles you don't need. The only thing that needs to be done is to leave a couple of centimeters above the so-called "scoop" level.

Glue the blanks to the base of the prepared bottle. On the "tail" that remains, you need to apply as much glue as possible and then press it to the surface.

It is very important to continue to cover the entire bottle in this way directly in a circle until the entire prepared perimeter is “occupied” with plastic spoons.

It is best to arrange them in a classic checkerboard pattern and slide them together a little.

Thus, it will be possible to reduce the number of "free spots" to a minimum.

• The ceiling is removed from the old prepared chandelier and placed in a dried bottle.
• If there is a desire, then decorative can often be performed in a similar way.

That's all. It remains only to install the chandelier in the chosen place, and also check its operation by connecting it to the power supply.

Another interesting chandelier option is a chandelier with decorative butterflies. It is worth noting that going to almost any master class on making a chandelier, designers always offer to learn how to create it, which is not surprising, because it can perfectly fit into almost any interior of the room.

Note!

In addition to the fact that this option looks really luxurious and expensive, even a child can do it with the help of an adult, so its popularity is easily explainable.

DIY chandelier photo

Note!

Today, a chandelier is more than just a source of light. It is one of the main elements of the room decor. Handcrafted lighting fixtures are the most popular as they represent the personality of homeowners and their extraordinary creativity.

Undoubtedly, hand-made creativity is a rather difficult task that requires a lot of patience and accuracy. However, doing something with your own hands is always quite exciting and informative. The topic of this review is how to make a chandelier with your own hands.

The choice of material for a homemade chandelier

In order to make a handmade lamp, a variety of materials are used:

• glass;
• wood;
• plastic.

In addition, sometimes, to make a chandelier at home, they use very unusual things:

• paper;
• cardboard;
• disks;
• straw;
• branches;
• wine bottles and stuff.

When choosing this or that material, you need to take into account your own preferences and style used in the design of the room.

In addition to material, devices may differ in manufacturing techniques. The most common are:

• japanese origami;
• macrame;
• weaving;
• thread;
• knitting;
• application;
• embossing.

DIY chandelier ideas - step by step instructions

Nowadays, there are many unusual ideas on how to create a beautiful lamp for an apartment with your own hands. Consider those that are more popular.

Chandelier made of plastic spoons

Conventional disposable plastic spoons are the simplest and most affordable type of material to craft a chandelier. The advantages of such raw materials are:

• low cost;
• variety of colors;
• durability.

To make a lamp, you will need:

• a plastic bottle with a volume of 5 liters;
• disposable spoons;
• pVA glue;
• bulb holder;

Procedure:

1. Prepare the bottle. To do this, remove the label, cut off the bottom, wash the workpiece thoroughly and dry it.
2. Prepare the spoons by cutting off the handles.
3. Place scoops over the entire bottle with the convex part facing outward.
4. Fix the cartridge in the made cover.
5. Attach the chandelier to the ceiling and plug it in.

Chandelier made of plastic bottles

An interesting solution from a decorative point of view will be a lamp assembled from plastic bottles.

1. We take scissors and cut out various patterned shapes and unusual figures. We will assemble a chandelier from them.
2. We attach several thin rods to the frame of the old lamp and connect them, removing the central one. At this stage, the lighting fixture takes on the shape of a hedgehog.
3. We fix all the prepared shapes and forms on the chandelier frame. The product is ready!

Let's consider a particular example - the process of creating a lamp in the form of leaves:

1. Cut out small blanks from bottles that imitate leaves. Usually birch leaves are chosen.
2. Using a soldering iron, slightly fuse the cuts near the leaves, and draw the veins - this will make them look more spectacular.
3. Punch holes in the leg of each leaf with a heated fine needle.
4. Use wire to form the branches. Screw them to the frame of the future chandelier.
5. Attach leaves to the branches. The original design ceiling lamp is ready!

Chandelier with paper butterflies

The lamp with paper butterflies is also popular. This model looks very impressive and luxurious, although it is quite simple to manufacture.

Sequencing:

1. The role of the base is played by a frame from an old lamp or a simple rim made of metal or wood.
2. Take paper and cut out butterflies from it according to pre-prepared templates.
3. Attach the cut insects to a fishing line or nylon thread.
4. Attach the resulting threads to the frame of the future chandelier and decorate it.

Fabric chandelier

This type of lighting fixture is also based on a solid frame or thick wire. First of all, prepare the base, and only then you can start cutting out the material to create the lampshade.

The length of the finished product depends on your wishes, and the width must correspond to the size of the frame. After completing the cutting work, be sure to try it on. The next step is to sew the fabric to the base of the chandelier.

In order for the lampshade to retain its shape, you need to correctly approach the choice of material. If you are using a light fabric, then the lower part of the lampshade should be heavier.

Fringe, braid or lace can be used as decoration. But try not to overdo the decor.

Plafond made of threads and a balloon

To create such an original shade, you need to prepare:

• thick threads or rope about 1 m long;
• old cartridge;
• petrolatum;
• glue and brushes;
• balloons - 1 - 2 pcs.

Manufacturing process:

1. Inflate the ball to the required volume, and with a felt-tip pen mark the boundaries of the winding of the thread.
2. Coat the entire surface of the ball with petroleum jelly using a paintbrush.
3. Pour the glue into a wide container and start to process the threads with it as you wind it around the ball.
4. After you fill the ball with threads to the marked boundaries, it should be left to dry.
5. After a day, burst the balloon and remove it.
6. Cut a hole for the chuck at the top and insert it. You also need to cut a hole from the bottom of the plafond - this will make it more convenient to insert the light bulb. The product is ready!

Wine bottle chandelier

Such a chandelier is more time consuming to create than the options described above. It is rather difficult to make it. This requires patience and attention. But the effort is worth it!

Necessary materials:

• wine bottle;
• cartridge;
• cable;
• sandpaper;
• base of metal or wood.

From the tools you will need a glass cutter.

Manufacturing procedure:

1. Preparatory stage. Wash and dry the bottle, get rid of the labels, mark with a marker a line along which you cut the bottom using a glass cutter.
2. Sand the cut.
3. Slide the wire through the bottleneck and attach the socket.
4. Secure the bottle to a pre-prepared frame.

The number of shades for the chandelier depends on you - you can leave one or make five or six.

Laser disc chandeliers

If a large number of old CDs have accumulated in the apartment, do not rush to throw them away. They will make a pretty creative lamp.

To make an unusual accessory from laser discs, you will need to prepare a pair of round plates. They should be slightly larger than the discs. Still needed:

• fluorescent light bulb;
• steel or wooden racks;
• old magnetic starter;
• many CDs.

Take a thicker board and punch a hole in it for the starter. Attach everything to the lamp. Then start stringing CDs onto it while mounting the racks. Attach the second plank at the end. The work has been completed.

Chandeliers made of wood

Wood is the most common material for all kinds of crafts. The chandelier is no exception.

To make such a lamp, you need:

• wooden planks 0.4 m wide;
• glass jars with a volume of 1 liter for shades;
• sandpaper;
• self-tapping screws.

The order of manipulations:

1. Sand the strips with sandpaper.
2. Make recesses in them on the back side for mounting the wire and three holes for the shades.
3. Varnish the planks.
4. Attach the sockets, screw in the bulbs.
5. Plafonds will serve as ordinary liter cans, painted white.

Choosing a lamp for a homemade chandelier

To make a chandelier made from scrap materials, made by you, look even more attractive, you need to choose the right bulbs for it. The following guidelines will help you:

1. Choose a lamp with a suitable wattage. Remember that overly strong products can cause a fire.
2. Look at the number of lumens. The larger it is, the more natural the lighting is.
3. Consider the shape of the light bulb to match your appliance. For some models of chandeliers, bulbs of a strictly defined shape are required. Only then will they work efficiently and correctly reflect light rays.
4. Be sure to look at the expiration date. If you plan to use the lamp frequently, then look at the lamps with the longest lifespan.
5. Ask what kind of light the lamp will glow - cold or warm. For the home, it is better to purchase an option with a warm shade of light. This will make the environment seem more comfortable.
6. Do not ignore the energy consumption of the light bulb. Products with low energy consumption are considered the best choice.
7. Check for mercury in the lamp - the method of disposal depends on this. Mercury-containing products cannot be simply thrown into the trash can. They must be handed over to special collection points.

Product decoration

You can use a variety of things to decorate homemade chandeliers and lamps:

• paints and varnishes;
• lace;
• satin ribbons;
• fringe and braid;
• beads, beads, rhinestones, stones.

Artificial or dried flowers, feathers carved from butterfly fabric are good decor. In general, how to decorate the finished product depends only on you. You can use any available means, which your imagination indicates.

In conclusion, we note that such a home-made lighting fixture, like a chandelier, will definitely bring notes of freshness and stylishness to the atmosphere of the room. Your loved ones and guests will definitely note the originality of the accessory and your skill. In addition, a hand-made lamp is an excellent gift for a friend or colleague.

Original photo ideas of homemade chandeliers

Ceiling chandeliers are lighting fixtures that simultaneously perform two functions. First, they are used to organize the main lighting in the room. Secondly, devices are one of the main elements of decorative room decoration.

Numerous manufacturers offer equipment of different designs, but it is far from always possible to find something really worthwhile that fits into the overall interior of the room. In other situations, the cost of the chandelier you like may be too high. That is why many people are interested in how to make a ceiling lamp with their own hands.

Hand-made products will be unique and original, thanks to them you can express your taste and character. It is not so easy to make such devices on your own. Work requires a certain amount of imagination and perseverance. On the other hand, a ceiling chandelier can be created from improvised tools and items that have become trash for you.

Choose any materials for making - wood, plastic, metal or glass. Chandeliers made of wine bottles, wooden skewers or straw look very original. To summarize: the choice of material for a homemade lamp completely depends on the imagination and idea that arose in the head of the owner of the apartment.

Varieties of lighting devices

The final stage in the implementation of any repair and construction work will be the purchase of lighting fixtures. Often, the main one is the ceiling chandelier, installed in the center of the room, provided it has the correct geometry. There is a wide range of luminaires on the market that differ in design, shape, principle of operation and even the presence / absence of certain structural elements.

Today, all people strive to save money, so it will be important to use a chandelier for energy-saving or LED lamps. It is advisable to choose products with partially or completely closed shades in which lamps are hidden. Due to this, you will protect the structure of the ceiling and will be able to protect yourself in the event of a light bulb explosion (fragments will remain inside the plafond).

If you still liked the chandelier with an open arrangement of bulbs, then inspect it and make sure that after installation the luminous flux will be directed downward. There is also a simple rule - the simpler the product, the easier the subsequent installation.

Another point to consider when choosing a chandelier is the purpose of the room and its dimensions. In spacious rooms with high ceilings, volumetric pendant lamps should be installed. Space saving is required for small spaces, so focus on flat (flattened) options.

Conventionally, chandeliers for the ceiling can be divided into two main types:

• classic hanging;
• flat, placed as close as possible to the ceiling.

And the latter are divided into two subcategories - built-in and overhead. Overhead shades are considered the best solution for bathrooms, corridors and kitchens. The presence of a separating platform ensures their rapid cooling and high fire and electrical safety.

Recessed luminaires are also called spotlights. They are often installed (more correctly - built in) into furniture, false ceilings or arched structures. Manufacturers provide a wide variety of shapes, colors and designs for both traditional and flat luminaires.

Finally, in addition to the design features of the lamps themselves, the type of light sources used is distinguished:

1. A filament lamp is one of the common and simple options. The cheapest light source. Under mechanical stress, it quickly breaks down due to the vulnerability of the structure, it burns out relatively soon (in the case of continuous operation, it can burn out in two or three days).
2. An energy saving fluorescent lamp is one of the best types of housekeepers. The advantages of the product are associated with efficiency and long service life. Along with LEDs, it is the most common light source in developed countries.
3. The LED lamp is an expensive product, the popularity of which is increasing every year. The efficiency exceeds 90%, and in the case of high-quality devices it reaches 98%. They are characterized by a longer service life and increased reliability.

An example of a homemade lamp

Consider one of the simplest examples of a DIY ceiling lamp.

For manufacturing we need:

• plastic bottle with a volume of 5 liters;
• plastic spoons - their number depends on the size of the bottle, which will become the frame;
• quick-drying plastic adhesive;
• sharp knife;
• cartridge with wire.

To begin with, a frame is prepared from a plastic bottle. Remove any labels from the item, rinse and dry thoroughly. After that, boldly cut out the bottom. Cut off all the handles from the plastic spoons, but so that small pieces of 2 cm remain.

Glue the resulting scraps with "scoops" to the base of the frame from a plastic bottle. To do this, we just need the remaining pieces of handles, which need to be poured abundantly with glue and pressed tightly to the surface (the convex part of the scoop should look outward). Glue the container in a circle until the entire surface is hidden. Ideally, spoons are staggered and then slid for a tight fit and no visible areas.

Cartridges with wiring can be taken out of some old chandelier, then installed and fixed in a new product by stretching through the neck of the bottle. A decorative bowl can be decorated with the same blanks using glue and placed on the neck.

To make sure that the product is working, at the final stage, screw a light bulb into the lamp and connect it to a power source. If successful, it remains to install the chandelier on the ceiling.

For a more stylish design and change of color schemes, you can paint plastic spoons. This will increase the originality and attractiveness of the product.

Style selection

In addition to the points listed in the first chapter of the article, when choosing a chandelier, you need to focus on a specific style. This is also true for those cases when you decide to make the product yourself. Comfort, coziness and how pleasant it will be to be in it depends on the interior created in the room.

The ceiling chandelier is the main element of the decor, therefore, with a competent approach, the perception of the environment will improve, with a careless one, it will completely deteriorate. As you know, "breaking - not building", therefore, to spoil the interior, it is enough to choose the wrong style.

Decide in advance on the design of the future lamp. The most common styles for chandeliers are high-tech, modern and provence.

High tech

It includes products made of glass and metal. Modern appliances fit perfectly into the design of the bedroom and living room. Externally, the chandelier may look chaotic (with an arbitrary arrangement of decorative elements). An excellent option for people who want to modernize an apartment or private house, but do not want to tinker with something too complicated. Any errors made in the manufacture of the chandelier may look like an original design solution.

Modern

In accordance with this style, appliances are created from glass and wood. The ceiling luminaire is characterized by perfectly straight and clear lines, has the correct geometry.

Provence

The most complex execution, which is suitable for people who understand the principles of hand-made. Various fabrics, colorful ribbons, beads, embroidery can be used to decorate the chandelier. The lamps turn out to be delicate, suitable for creating a romantic atmosphere. The Provence style lighting fixture is suitable for decorating any living space.

Installation materials

For ceiling mounting the luminaire, certain materials and tools are required:

• the lamp itself;
• junction box;
• screwdriver (curly);
• switches;
• as an alternative - dimmers (rotary toggle switch that regulates the brightness, on / off the light bulb);
• wires;
• electrical tape;
• indicator (tester);
• pliers;
• connecting blocks.

Ideally, electrical wiring should be routed using connector blocks. If there are no such products, then twist the bare ends of the wires with pliers and hide them under a dense layer of electrical tape. Connections can also be placed under polymer caps. Make sure the wires are tightly wrapped around each other.

When laying the cable, pay attention to the material from which it is made. It is advisable to twist aluminum with aluminum or copper with copper. When wires of two different materials come into contact, gradual oxidation will occur, leading to burnout and loss of contact.

Sequence of work

Determine the phases of the wires before installing the ceiling light. To do this, you need an indicator screwdriver or a special probe. If you attach the work surface to the phase core, the light will start to glow. Otherwise, the wire refers to the zero phase.

Next, you need to determine the phases on the wiring of the lighting fixture. Plug in two wires, but never touch the third. If there are several bulbs on the chandelier, then about half of them will light up. Leave any wire in the outlet and insert the third instead of the second. The other half of the bulbs should light up. Thus, the wire that is constantly in the outlet (and when alternately connected with the other two turns on the bulbs) is a zero phase.

Fix the luminaire to the ceiling. For this, both a classic hook protruding from the ceiling and a mounting rail (included in most modern devices) are used. If there is a hook from an old chandelier, it is advisable to dismantle it.

Luminaire connection

If it is necessary to connect a floor lamp or a chandelier with a two-core cable, difficulties should not arise at all. Simply connect the ends of this cable together with the two ends of the wiring harness. If the luminaire consists of several parts and more wires, then twist them correctly in pairs, subsequently connecting to the desired residential electrical wiring in the apartment.

A three-core cable indicates the presence of two normal and one neutral phase. Proceed as described above to find the zero phase. Then connect the device to the house wiring.

Traditionally, the neutral phase on the luminaire has wires with blue insulation, the usual one is brown, black or red. If there are several blue wires, then they need to be connected in pairs, and then connected to the zero phase. Proceed in the same way with the other colored parts.

Products with four veins are much less common. The latter is intended for grounding and is usually colored yellow-green. It should be screwed to the luminaire body using a regular screw. Be sure to insulate all connections.

Any materials can be used to make ceiling lamps with your own hands. The main thing is to choose the style and shape in advance and navigate the place of installation. Also, before starting work, it is advisable to draw a sketch of the future product. Everything else is limited by your imagination.

The connection of self-made lighting fixtures is carried out in the same way as purchased ones. Using our instructions, you can easily connect ceiling chandeliers with two, three or even four conductors. The main thing is not to forget about safety rules and to ensure complete isolation of the wires, excluding a short circuit.

Learn how to make a light fixture out of wire, construction mesh, so that flowers can grow inside it. How to turn a snag into a lamp, and the branches of a tree into a floor lamp?

How to make an original lamp?

A very interesting design piece is obtained from the simplest materials, most of which remain from a picnic. If you went out with friends, relatives to nature, you must definitely remove the garbage after you. This not always desirable job is made more enjoyable if you ask to fold the plastic spoons separately. If children come with you, arrange a competition, who will throw more and faster spoons into a separate garbage bag or bag.

You will also need water canisters. After a fun picnic, arriving home, after a while, you can make original lamps from the packaging left over after the feast. Give them to your friends, keep them for yourself to hang in the hallway, in the kitchen or in the country.

So, here's how such a chandelier is created with your own hands or with the help of home. First, lay side by side:

• 5 liter oval plastic bottle;
• disposable plastic spoons;
• cable with socket and plug;
• low power LED light bulb;
• pliers;
• glue gun;
• screwdriver;
• stationery knife.

So that such original lamps do not lead to a fire, take an LED, not an ordinary Ilyich light bulb.

For information: 4-5 W LED bulbs correspond to 40 W, and 8-10 W - 60 W conventional electric.

Carefully so as not to cut yourself, remove the bottom of the canister with a knife.

Also, observing safety precautions so as not to injure yourself, cut off the handles of each plastic spoon completely. Using a little hot glue from a gun on the cuts of the "blades", glue them to the bottom tier of the bottle. Usually 17 pieces go here. Then, with an overlap, attach the second and subsequent rows, placing the elements in a checkerboard pattern.

To cover the neck, glue 10-12 scoops together to form a ring.

Pass the bulb holder with the light bulb and cable through the cut bottom hole in the bottle. If this "electrical" part is difficult for women, call your husband. If you don't have one, buy a cable from a hardware store with the socket and plug already screwed onto it. You can borrow this working part of the lamp from the old one.

Put a “ring” of spoons on top of the canister, screw the lid on. To do this, let your husband drill a hole in it with a drill, and you yourself can do this manipulation with a hot nail or self-tapping screw, holding it with pliers. The original lamp is ready.

3 models of designer lampshades with your own hands

Ideas are in the air. If you are in the country and there is no such piece of furniture, it is easy to make it yourself from what is at hand. Take:

• hollow dishes;
• wire;
• polyurethane foam;
• gloves;
• paint;
• brush;
• pliers.

Unexpected things can be used as a basis: an old saucepan, a flower pot, an already unnecessary baby pot.

Turn over any of these auxiliary items, lay on a plane upside down. Wrap the wire, its turns repeat the shape of the future product, should be the same as the lampshade will be. With your own hands, but with gloves, take a spray can in your hands, squeeze out a little foam from it onto the frame, closing the wire, let it dry.

After that, make the contours more even with a knife, cutting off the excess. Paint in your favorite color, white looks airy and elegant. Such a lampshade, made with your own hands, will decorate a summer cottage. You can make several and hang them here. By avoiding large expenses, this way you decorate the space.

This lampshade looks stylish and modern, while the next one has a classic look. For it use:

• thick wire;
• pliers;
• a small plastic water bottle.

Let's start making a lampshade with our own hands by making the upper center piece. To do this, wind 1 turn of wire on the bottle, remove it, cut off the excess, twist the ends to make a ring. Its diameter should be such that the cartridge can be threaded from below, and it kept on the ring, would not come out through the top.

Now roll the large outer ring out of the wire. We will fix it. To do this, cut 4 identical pieces of wire with pliers, fix the first end of each on the small one, and the second end on the large ring. The upper part of the lamp is ready.

The dimensions of the lampshade depend on whether it is made for hanging from the ceiling or for a table lamp. The first is larger than the second.

Roll the bottom ring out of the wire, it is the largest. Connect it to the second top five pieces of wire, spreading them evenly. It remains to decorate the frame of the lampshade. To do this, pass the wire through the second ring, twisting it in a wave and twisting it through the base. Also design the second ring.

It remains to sheathe it with fabric. Attach the flap from the second top ring to the bottom ring, cut to size, adding to the seam. Cut off the large sides of the resulting rectangle. Stitch the fabric from the side directly on the frame, decorating this place with braid. That's it, you made a wonderful lampshade with your own hands.

If you want to get acquainted with the most modern ideas on this topic - please! In skilled hands, the construction mesh will turn into a stylish lampshade.

With your own hands or, having summoned a man, cut a rectangle from her with scissors for metal. To fix the cartridge, twist a circle from the wire, fix it on top of the lamp with four pieces of wire.

If you do not have a coarse mesh, use pliers to trim off the excess sections to increase the distance between the strips of wire. Paint the lampshade and the frame is ready.

And now the magic begins. You can make an original lamp that will benefit not only people, but also plants. Attach a flowerpot with a flower at the bottom of the lampshade. You can tie, woven using the macrame technique, to the lower turns of the wire with a thick rope. Check that the mount is secure.

If there is a man and a welding machine in the house, encourage this tandem to make a metal ring with "rays" that need to be welded to the bottom of the lamp.

If you have an indoor climbing plant, such as ivy, run its lashes between the mesh of the trellis. The original lamp will become a flower house. It is better not to use ordinary light bulbs, as they are very hot and can burn plant leaves. Plus, the air around the flowers will be too hot. Screw in an LED or fluorescent light bulb.

For such an original lamp, you needed:

• construction mesh or strong wire;
• brush and paint (optional);
• pliers;
• light bulb with a cartridge;
• flower.

You can well fix the cups with seedlings on such a lampshade, thereby, finding additional space for growing it and conditions for lighting in the evening.

We make a floor lamp, table lamp with our own hands

While walking in the woods, do not pass by the ornate driftwood lying around. Put it in a bag, take it with you. Wash at home, if there is bark, peel off with a knife. Rub over the surface with fine sandpaper, if required. Cover with wood varnish.

To keep the table lamp well, the snag must be screwed to a solid pedestal with self-tapping screws. It must be heavy enough. An oak is suitable for him. If you find a broken branch of this tree in the same forest, saw off a 5–7 cm thick circle from the thick part.

It will also need to be sanded and varnished. When these wooden blanks are dry, connect them with self-tapping screws of sufficient length, passing them first through an oak stand, and then, driving them into a snag. Bolts and nuts can also be used.

You already know how to make a lampshade with your own hands. Therefore, make it and attach it to the driftwood, tying it with wire.

If an old floor lamp stand is no longer happy or you just want to decorate it, use wood for this as well. See how good birch racks look. Attach a branch of this tree to the lamp and see what kind of floor lamp you could make with your own hands.

How to crochet a lampshade?

If you are fed up with an old floor lamp, you can transform it with your own hands, giving it a "zest". Take the lace tape and sew it onto the top and bottom of the fabric lampshade. You can decorate with glitters by gluing them in the form of a pattern, evenly or randomly.

A floor lamp or chandelier will turn out to be unique if you knit a lampshade for them with your own hands. This can be done with crochet or fine knitting needles. For the first option, you will need:

• hook;
• cotton thread;
• pattern for knitting napkins;
• water;
• starch;
• ribbons.

You can use, for example, such a pattern for a napkin.

Measure the upper circumference of the lampshade, we need its diameter. Tie a chain from air loops. Next, knit in a circle based on the napkin pattern. Measure the height of the lampshade and the diameter of its bottom circle. Based on this data, draw a trapezoid or rectangle (depending on the shape of the lampshade). Crochet this shape. Sew on the side.

Use single crochet stitches to tie the upper circle of the lamp and this trapezoidal or rectangular part.

Boil a glass of water, stirring, pour 200 ml of cold water in which 1.5 tbsp. l starch. Boil for 1 minute, remove from heat, cool. Lower the knitted lampshade here, soak well, then squeeze, let the water drain, and the canvas dries, but remains slightly damp.

Put it on the shade. To keep the knitted lampshade well, you can skip a few ribbons or ribbons between the loops, tie them.

Plafonds look very beautiful if they are decorated with crocheted flowers.

A solution of starch or PVA will help to shape the knitted lampshade. Put it on the frame, apply glue, let dry.

In the second case (when knitting needles are used), you need to make calculations for knitting, draw a pattern by the standards of the lamp, knit a trapezoidal or rectangular lampshade. Such models are suitable for floor lamps, chandeliers of strict shape. If you need to crochet a semicircular lampshade, first make the wedges, and then connect them with single crochets.

Here is another openwork chandelier. It is pleasant to make muslin with your own hands and decorate the bottom of the product in a circle. But first you need to create the lampshade itself. The crochet pattern for this beautiful thing is presented right there.

A table lamp will look amazing on the bedside table if there is such a lampshade on it, the knitting pattern of which is also given.

If your son or daughter does not let you finish the work, demanding attention, invite the children to also make a lampshade, let them twist the strips of paper into tubes with their own hands. Better to wrap them on a thin pencil, or on a wooden sushi stick, and then glue the free edge so that it does not unfold.

Now you need to glue the resulting blanks using an object of a suitable shape as a frame, for example, a 5-liter canister. Having made the first inner layer, have the child move on to the second. There should be several of them to close the gaps. When the PVA is dry, cover a table lamp with this lampshade or hang it from the ceiling. It looks original and extravagant.

If you are interested in other ideas on this topic, watch the video:

A very interesting version of a lamp made of discs: