What you need to make a state number keychain. A business idea with minimal investment - making key fobs with a car number. Thanks to the sides, the lens sits firmly inside the workpiece, its side parts are reliably hidden from prying eyes, while the image itself

The best gift for a driver friend is a key fob with a GOS number of his car. such souvenirs in manufacturing shops are not very expensive, but if you want to buy such a trinket for all your friends, for example, for the new year or February 23, then you will have to shell out a decent amount of money.

Let's watch a video of a homemade product:

To make a keychain, you will need:
- plastic ruler;
- file;
- stickers with GOS number;
- stickers with an inscription;
- Double-sided tape;
- vodka or solvent;
- a brush or cotton swab for solvent;

From the plastic ruler, we cut out the workpiece of the required size and process all the edges with a file.

Since it is impossible to buy stickers with a GOS number, we print it on a printer. Decide in advance on the size of your keychain and print a sticker of the same size.

On the reverse side, print a sticker with the required car brand.

It is not necessary to print on self-adhesive paper, you can use a thick sheet, which will need to be sealed and protected with tape.

Stick the tape on the number, and cut off any excess around the edges.

Now we glue the numbers on a thin double sided tape (the tape should not be foam-based, otherwise the keychain will be too thick).

Degrease the surface of the plastic with a solvent or vodka.

We glue the blank with the number on the plastic.

Now we apply transparent varnish so that our keychain is visually convex. Varnish should be applied on both sides and on the sides.

All our keychain is ready.

Manufacturing to order and sale of metal blanks for state key chains. number for a car is one of the activities of our company. We have our own production in Moscow, so we offer blanks for keychains with a car number, keychains with a car number, with state. room at the lowest price. They are called differently, but the essence boils down to the same product - a metal plate with an "eyelet" (fastener) for fittings.

Keychain license plate has the following characteristics:

• Material: stainless steel 1.5 mm thick;
• Size: 52x11.2 mm (excluding the "ear");
• Weight: 5 g;
• Coating: uncoated / white coated for sublimation;
• Accessories: ring with chain, carabiner with chain "chain mail";
• Optional: self-adhesive protective lenses filled with polymer resin.

In accordance with Appendix A of GOST R 50577-93 "Signs of state registration vehicles", the size of the license plate for a passenger vehicle is 520x112 mm. Our blanks for key chains-state. the numbers are a miniature copy of the original on a scale of 1:10. And of course, the thickness of steel 1.5 mm makes the key chain strong and durable, one might say unkillable. You should not try to save money and purchase products of doubtful origin 1.2 mm thick, because with a seemingly insignificant difference in thickness, key chains with a steel thickness of 1.5 mm look much more solid compared to thinner crafts.

We work with regions, delivery is carried out through transport companies. Pickup from our office in Moscow is also possible.

The technology for making keychains with a car number is quite easy. The most popular are two methods of applying the image, one of which is printing the image on a self-adhesive film, which is glued to the keychain and a ready-made transparent lens with resin is glued on top, or a sticker with a printed image is filled with polymer resin. And the second method is sublimation printing on key fob blanks - car numbers, logos, inscriptions.

How is the image applied? Printing takes place on an inkjet printer with sublimation ink, then under a heat press or at worst with an iron, the paper with the printed image is pressed against the keychain blank and, under the influence of temperature, the ink turns into gas and is transferred to the white coating of the keychain, penetrating inside, thereby ready-made keychains license plate resistant to abrasion and under normal use, the image will not be erased from them.

Now you can easily make keychains with a state number for a car with your own hands. And if you approach the matter professionally, then you can earn a lot of money by making custom license plate key fobs using our blanks.

In addition, we manufacture and sell. The entire range of goods is constantly kept in stock in our warehouse in the required quantity.

Do you want to make an original gift to your friend, acquaintance or relative who has a car? Then give him a stylish keychain with a GOS car number. You can make this present with your own hands from scrap materials.

Such a homemade souvenir can be presented for a holiday, but it does not have to be male (23 February, New Year, Birthday, etc.), as well as just so to express your gratitude to a person or do something nice.

What materials will be required

If you don't know how to make a keychain with a GOS number with your own hands, believe me - there is nothing complicated here. As a basis, you can use a regular plastic ruler that children wear to school. You can also take a piece of sheet metal 1–2 mm thick or a piece of plywood.

Additional materials for the manufacture of a key fob will require:

• small stickers with GOS number (can be printed on a printer);
• thin double-sided tape (not foam), and regular tape;
• the simplest cheapest solvent (you can also use ordinary vodka).

All these materials are available in almost every home. As a last resort, you can run to any hardware store and buy the missing components. They are inexpensive.

Tools

To make a keychain, you need a file (it's best to use a metal file), scissors for paper or a stationery knife, an ordinary paintbrush or a simple cotton swab to lubricate the surface of the workpiece with solvent.

If you use a 5–6 mm thick piece of plywood as a base, you will need a file for wood. All these tools can also be found without problems in almost any home.

Process of creation

First of all, we cut out a rectangular blank made of plastic, metal or wood (you can also use plexiglass). We process the edges of the part with a file and sandpaper. Then you will need to print the license plate number of the car of the required size on a printer, and then all unnecessary must be cut off with scissors.

On the prepared numbers (on the front part) we glue the usual transparent adhesive tape, carefully cut it out with scissors and smooth it so that there are no bubbles and "waves" on the surface. Next, on the back of the license plate we glue a thin double-sided thin tape.

Probably each of us thought about his own business project, but not everyone has a promising business idea and impressive start-up capital. A business idea with minimal investment is possible. Today we want to introduce you to a fairly young business project - production of keychains with car number.

This idea has fully justified itself and has established itself as a successful and profitable project. Particular attention should be paid to the fact that the start-up capital is minimal, to start you need only about $ 100, and the estimated amount of income per month is at least $ 1,000. Before starting to implement the idea, you should clarify whether this niche is occupied in your city, if not, then it's time to dare.

Please note that the keychain in the shape of a state number is a great accessory that both women and men will want to have. Any information that the client wants can be entered on the keychain, it can be either an exact copy or a two-way replica. Among other things, a keychain with a state number can be a good and necessary gift for friends or relatives.

Basics of promoting a keychain business

Since your main consumer is car enthusiasts, then advertising should be in places of mass congestion of cars. These can be gas stations, parking near supermarkets. Here you can apply several types of advertising at once - stationary ads, as well as distribution of leaflets. Among other things, leaflets can be distributed at traffic lights or near shopping centers. It is enough just to start advertising the keychain in the form of a state number, as the first orders are guaranteed in the first days. If you approach with full responsibility, then word of mouth will continue to work and orders will flow like a river. You will not notice how applications will arrive at 10-15 per day. After buying or receiving a keychain as a gift, a person will definitely show it to their surroundings, and if the keychain is made well, then they will definitely want to buy it.

Production margin calculation

The calculation of profit is quite simple - the production of key chains with a state number is not expensive, the cost of the metal part is only 50 rubles. A ready-made keychain can be sold at an average price of 250 - 350 rubles. Thus, your benefit is 200 - 300 rubles. Now imagine that you will sell from 8 pieces or more per day, then the daily profit can be from 2 thousand rubles. Reaching your potential customers is a whole city, every car owner is your potential customer.

Keychain production technology for cars

Please note that the production of keychains with a state number is very simple. An image is applied to the finished metal workpiece, that's all. Let's take a closer look at the production process. The first thing to do is to make a layout of the future inscription, after which the finished layout is printed using the most ordinary inkjet printer.

Special attention is paid only to the equipment for the manufacture of key chains, since the printer is loaded with specialized ink capable of thermal reactions. Special paint is needed so that, when heated with a simple iron, one part reacts with a metal workpiece and eats into it tightly, leaving the desired image, and the second part of the paint goes into a volatile gas.

Thus, we get a bright and clear image that does not wash away and cannot be scraped off.

List of required equipment and tools

The first thing you should pay attention to is that there is absolutely no need to buy expensive equipment. You will need a machine for making keychains, but if you have a minimum authorized capital, then an ordinary iron can save you. But if you do not have a printer, then you can print layouts from friends or acquaintances, so you can start a business without having any cash at all.

Why choose this business?

As we have already described above, this business project does not require colossal cash injections. The authorized capital is not more than 50,000 rubles. This is its main advantage. Among other things, a keychain with a state number of a car is:

• Quick start with minimal cost, on average, 5 thousand rubles are needed to start a business project;
• No need to rent a separate room - all work can be done at home;
• In small towns you will not find competition;
• Extensive coverage of potential clients;
• The business project is not seasonal and is in demand throughout the year;
• This type of business can be engaged in as an addition to the main line of business, since it takes about ten to fifteen minutes to make one key fob;
• Even a teenager can make key rings;
• And the main plus is that you do not risk anything, since the costs are minimized.