Mobile office partitions. Office partitions are the best options for functional and beautiful auxiliary walls (65 photo ideas) How mobile office partitions differ from stationary ones
Space zoning in the office - a process that all managers of large enterprises face. The number of work is constantly growing, the staff is increasing, certain canons and requirements for personnel appear. Therefore, it is important to provide everyone with their own work area. Here, no one will disturb the employee, here he will be focused on work and this is where his productivity will be maximized. Partitions in the office help to do this.
Methods for creating work areas
The most simple option is the division of employees into offices. It is easy to do it in old office buildings built during the USSR and Perestroika. In fact, in these cases, there are simply no options: the layout of the building is such that there are no halls and large offices, everything is scattered over small rooms. In new office buildings, the following methods of space zoning are used:
Stationary partitions that are installed in the office on a permanent basis and allow you to create both separate areas for work and entire offices;
Glass partitions - a popular option in Western offices, which is similar to the stationary one, but made of glass and does not provide confidentiality for employees;
Sliding partitions - an option for passages that allows you to quickly create a wall in the place where people walked a few seconds ago;
Mobile individual partitions that provide workplaces for several employees at once at one long table.
What is a partition?
Partitions are the modern counterpart to thin walls that are used to create rooms in apartments. They consist of several modules and are quickly connected using fasteners. The dimensions of each insert can vary between 2-3 meters in height and the same in width. A wide variety of design solutions allows you to make the most suitable choice and not be content with only what the financial side of the issue allows.
The purpose of partitions can be different: dividing a room into several sections, creating jobs, preparing separate rooms or making unusual changes to the interior of the room.
For all this, special connections are used, information about which is provided in the table.
Purpose |
|
Linear connection | Extending the length of the baffles without changing the configuration |
End post | The end of the septum in places where it does not connect to anything else |
Intermodular rack | A stand that allows you to lengthen the span of the partition and strengthen it |
Connector for two baffles at 90 ° | Used to join two panels at right angles |
Tee 90 ° | Relevant in the case of the manufacture of several partitions on one side, allows you to create them without violating the structure |
Connector for 4 baffles at 90 ° | It is used to prepare partitions from both sides |
Connector 2 baffles at 120 ° | An unusual version of the connector connecting 2 partitions at an obtuse angle |
3-piece 120 ° baffle connector | Used in rooms with a rounded design |
Differences between different types of partitions
There is certainly a good reason for any variety. It is she who causes competition and allows different manufacturers to compete with each other. This reason is the obvious superiority of each type of partitions in some parameters.
Advantages of mobile partitions
Mobile partitions have several distinct advantages. The most important of these is the sufficient ease of installation. When installing mobile partitions, walls and ceilings are not damaged, holes are not prepared and latches are not attached. The structure of the walls is such that they do not require fastening to the ceiling and walls at all. It is enough to fix the partitions on the furniture to ensure their stability. Moreover, the barrier can be dismantled at any time and installed in another place.
What is special about stationary systems?
This type of partitions is not so easy to install, but it also has its advantages. The dimensions of stationary partitions are several times larger than mobile ones, so fastening to furniture in this case will not be effective. Such partitions are already attached to the walls and ceiling, which is why it will not work to move them when the desire arises - damage will remain on the walls.
Another advantage of stationary systems is excellent strength and sound insulation. There are even bulletproof options that can keep VIPs safe. The maximum height of partitions is 5 meters, so they are guaranteed to cover all space in an office with low ceilings. A wide variety of material combinations plays into the hands of stationary partitions, because their range is far superior to all other options.
Glass options for partitions
In fact, there are not so many differences between glass and fixed partitions. Both are attached to walls and ceilings, are used for serious zoning of office and retail space, have excellent strength and sound insulation. True, glass has its own peculiarity - transparency. Due to it, in the office, bosses can always control their subordinates, and the company's team tries to be as close as possible to the management. In addition, they look much more elegant than plastic or combined counterparts. If you don't want to leave your walls transparent, you can seal them with paper, creating a large mirror in the office.
Sliding glass and plastic partitions
The production nuances of this category are the same as for conventional glass and plastic stationary partitions. They are needed to create a complete picture in the office: the doors to the offices, large free areas and the space in the arches can be filled sliding doors... Due to this, the room is overgrown with doors and becomes much more comfortable. Sliding partitions are an element of a plastic or glass partitions on special mounts - wheels.
Production time
It is interesting that mobile partitions have a fairly quick time for the manufacture and installation of any partitions from the office. The installation time depends on the volume of partitions, but the production of products is carried out in 5-10 days. Installation of mobile partitions takes only a few hours, so delivery services discuss this moment with the client in advance.
With stationary structures, everything is a little more complicated.:
First, the base of the partition is installed, which will serve as its support in the future;
After adjustment, the base is attached, and glass or other material and blinds are ordered according to the finished dimensions;
If the size of the order is not large, it can be made on the same day, otherwise final assembly is performed only the next day.
This is not to say that partitions are really mounted faster than similar brick ones. But in their favor the excellent appearance plays, which so attracts customers.
Materials from which partitions are made to the office
The main material for the execution of the frame is an aluminum profile. It can be painted in any color at the request of the client, and as standard it is supplied in a gray color. The thickness varies between 2.8-7.5 cm, and this does not depend on the quality of the partition. It was already discussed above that there are 4 categories of walls and each of them is done on a separate type of profile ( different materials have different loads).
Deaf-type office partitions (the most a budget option) are made of drywall, on which a layer of vinyl film is applied. If there is not enough sound insulation in the room, then you have to use mineral wool... Transparent parts are made of M1 glass, the thickness of which also varies and depends on the load on this partition and the accuracy in its operation.
How is the design of partitions going?
Every day, glass transparent (or translucent) partitions are conquering the market. They are installed in new office buildings, shopping and administrative centers. All-glass office partitions provide a chic shine and unique appearance only when properly designed. To do this, the customer is obliged to provide the manufacturer with detailed information and discuss all the nuances with him several times. The following factors are taken into account:
Room parameters;
Placement of partitions in relation to light sources;
Conditions of use and the number of people working and staying in the building every day;
The desired appearance of the partitions themselves (transparent or deaf, with or without a frame);
The customer's wishes regarding sound insulation (if necessary, a second layer of glass is installed;
Fastening methods and the presence of moving elements.
Manufacturers pricing policy
A large assortment different types partitions are partly preserved due to different costs. Not every customer is ready to invest a large sum in the organization of the working space in his building. The minimum prices for different types of partitions are shown in the table.
As you can see, the difference is significant, therefore, the market demand for stationary and mobile partitions remains.
How is the installation done?
Installation can be carried out both on a frame and on a frameless basis, depending on the wishes of the customer. There are no obvious functional differences in the installation methods. The same doors are perfectly combined with glass and stationary partitions: they can be used sliding partitions or swing doors with a retainer.
If we are talking about the installation of translucent structures, then much depends on the skills of the installation team, the correctness of the measurements taken earlier and strict adherence to all installation rules. Glass partitions require special attention as the material remains prone to chips, cracks and scratches. But an experienced team will quickly navigate the terrain and complete the order. If necessary, even additional fasteners can be used to ensure maximum reliability.
Business space is always a lot of people, bustle, working atmosphere. The speed of solving labor problems is affected by every little thing, including such as a door. In the office, they only cause inconvenience and take up extra space, slow down work and cause discomfort. Usually, to replace them, office partitions are used, which do not take up unnecessary space, allow you to rationally distribute space, use each square meter with maximum efficiency.
What are the best partitions for the office?
In most cases, offices use standard sliding models, although there are also folding options, screen partitions. However, they are not very convenient and not practical enough, they can not withstand high loads, therefore they are much more suitable for use at home.
The only exception is glass "accordions", which are installed in stores and exhibition centers, allowing you to divide the space, but for the office it is still better to choose sliding office partitionsMoreover, it is preferable to order them according to an individual drawing, since in this case it is possible to take into account all the features of the room, the purpose of installing the partition and specificationsthat she should have.
The finished model should be combined with furniture, wall cladding, ventilation racks, interior and room design. The independent elements of office structures made in the same style create the effect of organicity and presentability, make a proper impression not only on the company's employees, but also on the clients.
How to choose an office partition?
When choosing a partition for an office, it is advisable to provide for all the features of its further operation, focusing on the appropriate materials, structures and fittings. At high loads, first of all, you need to ensure strength by installing rollers on the floor and ceiling, and using high-quality steel fittings, high-strength plastic. On the other hand, sometimes it is better to focus on the decorative part of the model.
When choosing a design, you can give preference to both old and reliable schemes, and develop a unique technology. For example, it is very convenient when the panels are built into the wall without actually taking up additional space. But on these issues it is better to consult with a specialist who will give advice based on the specifics of the situation.
The use of factory glass partitions in the office is relevant in any area. Structures have many advantages and are practically devoid of disadvantages if they are made according to standards and comply with GOST. There are dozens of varieties of glass products: transparent and opaque, smooth and rough, sliding and swinging. And each of these types is perfect for arranging office space.
Glass partitions are used to divide the space in shopping centers, administrative buildings, offices. They are well suited for separating corridors, show rooms, meeting rooms, and in shopping centers they easily delineate sales departments.
Important! To create privacy, plain or colored blinds, as well as matte or glossy films, are used.
Installation of an office glass partition is a process that does not require approval from individual authorities. Due to this, the redevelopment of the premises takes place without delay in time.
Structures are made of extra strong glass: reinforced, shockproof, triplex. Only such products meet the requirements for partitions. Another feature of office fences is the ability to use different types glasses (tinted, providing visibility from one side, scattering).
When arranging office space, owners can choose different variants decorative coatings.
Basic requirements for glass structures
Any office partitions made of glass must meet 3 parameters: safety, fire resistance, technology that preserves the canvas when broken whole. This means that when buying a product with one glass, it must be impact-resistant, tempered. When broken, such a canvas remains on one film, or crumbles into blunt fragments. They are not capable of injuring a person.
The second parameter is fire resistance. Products are tested with temperature, this should be reflected in the documents. Similar fittings are also used, which do not melt under the influence of fire. The product must be resistant to burning for 30 minutes. Disposal of such products should be carried out only through special enterprises.
When using all-glass partitions in offices or shopping malls located in seismically unstable areas, they must be resistant to this effect. When buying, you need to pay attention to the integrity of the structure. Any cracks or scratches are a critical defect and cannot be sold.
If you buy bulletproof glasses, then they must withstand at least 3 shots without a lumbago. For the test, use the weapon described in GOST.
Advantages and disadvantages
Have office partitions glass has many advantages due to the characteristics of the material used:
However, several disadvantages remain. The possibility of changing the space with such structures does not provide for the installation of additional elements on glass walls.
Glass partitions are fragile and expensive.
Another drawback is the impossibility of changing the size of the finished partition. When cutting, such products begin to crumble. High-quality configurations weigh a lot and cannot be installed in all rooms.
Classification and features of glass office partitions
There are several options for classifying office partitions made of glass.
The first is by design:
- Wireframe. For installation, aluminum profiles are used. If the double glazing method is used, the sound insulation is improved. Due to the frame, a one-piece structure is created, slightly narrowing the space, but increasing the reliability of the products.
- All-glass. They are also made of thick material (up to 1 cm) that has been hardened. Attached to the floor and ceiling with point elements. Glasses are located close to each other, there is no aluminum profile.
- Blocky. They are made of small glass "bricks", bars or panels.
It is possible to divide glass partitions according to the type of glass used. So, the most common types are distinguished - transparent and matte. The first category involves the use of tempered polished glass. Matte fabrics are processed chemicals (satin), which gives a special structure to the canvas. These products diffuse light and create more privacy.
Important! Textured partitions in the office look interesting: under the "sand", corrugated, ribbed.
Additional types appearance glass products: stemalite, that is, dyeing during production, decorative stained-glass windows, applications, smart glass that changes color when exposed to light or electricity.
Tinted glass with a special film - universal option... After all, such a sticker can be removed at any time.
Stained glass partitions look unusual - in their design, small colored or details of different texture are used.
The division is possible by the number of glasses used in the construction: double and single glazing. In the first case, sound insulation increases, but installation requires more care. If you make a mistake, dust can appear between the glasses. Single glazing maintains ease of maintenance and reduced cost.
Types of glass structures
There are 4 types of glass products that are suitable for office use:
- Transformable. They are made of independent canvases that move along special rails located in the ceiling. However, space is required at the edges, it is very difficult to install in narrow openings. Unfolded, they are used as fixed walls or sliding doors. It is impossible to install rails on the floor due to the design feature.
- Sliding. They are made in the form of glass sections. Sliding glass partition works using a sliding mechanism, which is located in the floor and on the ceiling. The sections can be presented in several forms: sliding, swinging, and also suspended.
- Stationary. Such partitions were named for the glazing features: they are attached directly to the walls, ceiling and floor. Outwardly they resemble ordinary walls, and also have maximum soundproofing properties. Stationary systems can be used to create unusual shapes: they are set in waves, obliquely, and also in a straight line. Stationary products have maximum strength due to the use of all-glass or frame sheets.
- Mobile partitions. Installation of products takes a minimum of time and resources, and if necessary, the canvas can be easily removed and installed in a new place. They are made of modules with clamping profiles. They are made in the form of a floor or table screen, sometimes they are realized in the form of a screen. Wide supports are used for installation. Mobile structures have minimal sound insulating properties.
Any glass partition looks beautiful, and when choosing the optimal configuration, it is easy to achieve the required quality from the structure.
Plumbing glass partitions
Such canvases are used to equip toilets and other premises (for example, a kitchen).
They have a simple configuration, but retain the properties necessary for the arrangement of premises with increased sanitary requirements:
- good strength;
- you can use opaque designs;
- non-exposure to moisture;
- easy to clean;
- do not come into contact with household chemicals.
Plumbing partitions form full-fledged cubicles in toilets. They can be combined with individual doors by providing latches or latches.
Material for the production of partitions
In comparison with window glass, thicker sheets (from 8 mm) are used for partitions. They have improved optical performance and mechanical strength. Such products are even suitable for use in schools, offices and kindergartens, clinics.
Important! In order to increase the strength, triplex glass or a reinforcing film is used.
There are names that identify the type of material used. Float is a smooth and transparent heat-polished glass that has earned the maximum popularity among office owners.
Curved glass is tempered and has a curved texture. But optivayt refers to the most expensive materials, as it has high strength and maximum transparency along with a large thickness. It is most often used in all-glass partitions.
Glass products also include partitions made from substitutes for organic material:
Glass partitions for office space are relevant when you need to save maximum space, preserve the integrity of the room. At the same time, you do not have to sacrifice privacy: blinds and colored films can solve the problem, while retaining the advantages of glass structures. However, you should be prepared for the fact that such products are expensive.
Which partitions are more practical - the choice of partitions for the office
Today, office partitions are an excellent solution when planning office space. They are quickly installed without unnecessary noise and dust. On modern market presented a solid assortment of partitions for offices with different characteristics in a wide price range aimed at a variety of buyers.
To select the optimal type of partitions, it is necessary to clearly define the planned number of zones and their purpose. It may be worth using different types of partitions for the most efficient distribution of space.
Types of office partitions - which office partitions to choose?
Depending on the characteristics and purpose, partitions for the office are divided into three main types:
Now let's talk in more detail about each type and reveal the advantages and disadvantages.
This type of partitions is an excellent alternative to walls. They are fastened with screws and dowels to the floor, walls and ceiling. Partitions cannot be moved, so they are used when planning individual rooms in the office. They have excellent sound insulation characteristics.
In turn, stationary partitions are divided into two subspecies: assembled once or collapsible systems. Once assembled, partitions are putty and painted after installation, so they cannot be used again after dismantling. Collapsible systems are quickly assembled without additional “wet” work, so they can be reused at a new location.
The advantages of stationary partitions:
- quick installation,
- strength and stability of structures,
- an alternative to walls that does not require approval from the BTI,
- good sound insulation,
- modern fashionable design,
- glass partitions perfectly let in daylight, which helps to save energy,
- the ability to hide communications in an aluminum profile,
- the possibility of using blinds,
- the ability to install switches and sockets,
- the possibility of installing doors with an electromechanical lock,
- the possibility of decoration.
Disadvantages of stationary partitions:
- impossibility of reuse after dismantling,
- the need for additional finishing work,
- massiveness of structures, coupled with additional load on the floors.
With the help of stationary office partitions, one large office can be easily divided into different zones: reception, hall, mini offices, director's office, and so on.
Mobile partitions can be easily moved around the space as they are not attached to the floor, walls or ceiling. Some of them even have casters for convenience. They are great for visual separation working area... As a rule, in height they are not higher than human height, but also not lower than a person in a sitting position. Mobile partitions are presented in three types: screens, panels, screens. The screens are installed directly on the table.
Advantages of mobile partitions:
- simplicity and ease of changing the layout,
- a wide selection of materials allows you to create an ensemble with office furniture,
- quick installation,
- the possibility of installing blinds (with double glazing),
- light weight,
- the possibility of installing doors,
- affordable price.
Disadvantages of mobile partitions:
- poor sound insulation,
- stability is lower than that of stationary partitions.
With the help of mobile office partitions, it is impossible to fence off departments or the director's office. They are suitable for visually highlighting the working area of \u200b\u200bordinary employees.
Sliding partitions allow transforming the space in a matter of seconds. For example, with their help from a large conference room, if necessary, you can make small room for negotiations, separating part of the room. The required number of panels is suspended from a guide rail mounted in the space behind the ceiling.
