Drawing of a coffee table with dimensions from chipboard. A do-it-yourself coffee table is a creative design for decorating a home interior. Materials for making

Even a novice master will be able to make a table out of scrap materials. But before you assemble a coffee table with your own hands, it is better to look at the drawings and diagrams in advance. This will allow you to determine the shape of future furniture and cut off too complex options.

Diy drawings and diagrams of coffee tables

It is comfortable, lightweight and versatile. For the rigidity of the frame, the underframe is assembled from the legs and the sidebar - a rectangle that connects the legs and supports the tabletop. Otherwise, the legs will move apart and the table will lose its stability.

At the same time, the complexity of assembly does not increase much, but books, notebooks or other trinkets can now be stored in the coffee table.

A feature of this design is the absence of legs - they are replaced by four sidewalls, to which a ready-made folding mechanism is attached from the inside. A wide board is fixed to it on a short pair of supports - the underframe, and a double tabletop is attached to the high supports, which in the unfolded version rests on the underframe.

PVC pipe magazine table

The simplest and most economical, but very original version coffee table - make it out of plastic pipes... The shape and height depend only on the wild fantasy. It can be a small round table that serves as a bedside table or a full-fledged coffee table with a glass top.

To create it you will need:

• pipes of two diameters - thicker for the legs and narrower for the underframe, for example, 16 and 9 mm;
• glue gun or a tube of transparent superglue;
• medium grit sandpaper;
• a hacksaw for cutting plastic pipes (can be replaced with a saw for wood);
• acrylic paint to hide the printed markings on the pipes.

The process itself is outrageously simple:

1. The cylinders are cut to the selected length. 4 legs are made from a thick pipe - their length will be equal to the height of the future table (40-50 cm). 30 short cylinders are cut from a narrow pipe, on average 10-15 cm (depending on the shape of the table, the number can be changed).
2. You need to start assembling the base from the center - so there will be no large gaps between the cylinders. The adhesive is applied to the entire surface of the adjoining pipes. A little trick - in order to accurately glue the cylinders, liquid superglue is poured from the end of the pipes so that it flows down along the entire length of the joint. With a glue gun, the joints are simply processed from the outside - after painting, they will become invisible.
3. When the desired shape is reached, the legs are glued - you need to make sure that the diagonal distance between them is equal. Otherwise, the table will collapse on one side.
4. The final stage is painting. The easiest way to do this is by aerosol, although you can do it with a simple paint brush.

When placing glass worktops on your table, you should choose tempered glass with a thickness of 10 mm. To prevent the removable table top from sliding on the base, use silicone shock absorbers for furniture.

If a non-removable tabletop is planned, it is fixed with transparent silicone glue.

Assembling a wooden coffee table with your own hands

For admirers classic style there is nothing better wooden table... For him you need to stock up:

• planed bar 40x40 mm - for legs;
• planed board 50x20 mm - for tsars;
• a finished tabletop made of 800x400 mm furniture board (but MDF or plywood is also suitable);
• putty for wood - rub the holes from the screws;
• with sandpaper or a grinding attachment on a drill - process the wood;
• varnish or paint - for finishing table.

Of the tools, you will need a screwdriver (or screwdriver), a wood saw and a drill. After cutting the bar into legs, and the boards - into the sidebar, the assembly of the table begins:

1. The first is the underframe. For convenience and ease of assembly, everything is done upside down. The sides are attached to the legs obliquely with self-tapping screws through a preliminary drilled holes... But you can also use metal corners, if aesthetics are not so important.

Wooden tables are not only made of planed wood. If you have minimal skills in working with wood, you can create original furniture even from firewood. For example, picking up a wooden block of a suitable height and a pair of Y-shaped thick branches, working a little with a grinding attachment and varnishing everything, you get an excellent massive coffee table for a summer residence.

And if after the construction of the house there are several Euro pallets left, there is no need to rush to dispose of them. It's almost a ready-made table!

It is enough to grind and stain the surface, put them one on top of the other and connect them securely. And to make the table mobile, 4 wheels are screwed from below, 2 of which are with brakes.

Decorating a coffee table with epoxy resin

If there is a sawmill nearby and there you can get a sawn board with a lot of defects for a song - just great! It is from such materials that the most beautiful tables are obtained, decorated epoxy resin.

The process is time consuming, but not too complicated:

1. The cut board is glued with wood glue to the table top. Even boards are necessarily placed under the clamps - for uniform fixation.



2. After the glue has completely dried, the table top is sanded, all cracks and knot holes are cleaned. Before applying epoxy resin, the surface must be cleaned of dust and small chips.



3. To make the table glow effectively, use powder luminescent paint. For 2 liters of ready-made resin solution, you need about 100 g of paint. The resin and hardener are mixed 1: 1, the dose should be measured accurately and so that the hand does not tremble. Overdoing it with a hardener, the resin will crack, while a lack of hardener will delay the hardening period.

Such a table top is suitable both for a coffee table in the living room of a cottage and in the bedroom of a city apartment.

If there are a few meters of wooden blocks left at home, a table can even be made of them! The video shows in detail and in an accessible way how to make unusual designer furniture from building residues:

It's hard to be a fan design solutions for home furniture, while not having enough free funds to buy them. The point is not only the level of your income, but also the price tags that are characteristic of such furniture, because they are often several times higher than for traditional options.

You can solve this problem by making a coffee table with your own hands. You will be pleasantly surprised to know how easy and fun it can be.

Low table

Most often, this option is found among coffee tables. They are not new, they just started getting more public attention lately.

They gained popularity two centuries ago, when tea lovers - the British - began to use them. A hundred years later, this trend has spread to other countries of the world, including ours. Now this is not a very popular option, nevertheless, it has the right to life.

Chipboard table

A simple and fairly practical option can be a chipboard coffee table, which you can make yourself without any problems. Now on the furniture market, chipboard is one of the most available materialsthat can be used to create a traditional side table. Why traditional, we will talk later.

The price tag for this option will be significantly lower than if your choice falls on a wooden coffee table. It is best to take sheets coated with laminate or varnish. Nevertheless, you will put such a table in your home, and therefore you need to pay attention to the aesthetic component.

Further more and more depends on the design you choose. At the same time, a simple, small table can be made from several parts. This option will be small and with several shelves. Perfect for a living room, and will stand next to a sofa or armchair.

Shelves are well suited for magazines and remote controls for controlling equipment. This makes them less likely to get lost.

Glass table

Drawings of such coffee tables can be found on the Internet without any problems. You just need to take into account one feature - in almost any case, you will need to buy a glass part of the table. You can also solve this issue with the help of old glass, which may be in your shed or garage.

The main part of the table can be made of a material that suits you, and cover it with a sheet of glass on top. To do this, you need to cut it out in shape, then process the edges and fix it on the main structure.

Even if such a table is not made entirely of glass, with the exception of the frame, you can get a very attractive and interesting result that will look good both in modern interiorand in the design of apartments familiar to everyone without any peculiarities.

Wood side table

Enough detailed instructionsHow to make a coffee table out of wood can be found on the pages of thematic magazines. This option will be more expensive than in the case of chipboard, but at the same time appearance everything pays off. This material is better suited for tables large sizes, for which, if necessary, you can work or use them to store documents that you view while sitting in front of the TV in the evening.

The design can be banally simple: four legs for the legs, which are complemented by a tabletop of the desired shape. Depending on the latter, you can take three legs, which will look even more interesting.

On top of this, you can add various decorative and functional details - be it shelves or some kind of decorations. Here you can give freedom to your creative nature.

Unusual table options

You can often see photos of coffee tables that are made of unusual materials. These include a table made from an old suitcase.

The most interesting thing about this is that you practically do not need to do anything to create such an item. It will be enough for you to do the restoration of a pleasant appearance, if at all necessary, and install such a table.

A huge advantage of this solution will be the intelligent use of space in the room. Well this will be in front of the sofa, while the space inside the suitcase would also be good to use. You can put some kind of blanket there, or boxes of shoes. In general, here the matter is already behind a personal choice, in any case it is very convenient and practical.

Table made of scrap materials

Separately, I would like to consider a do-it-yourself coffee table from scrap materials. There are several options that I really liked, and I want to share them with you.

The first is the pallet table. They can be found in any supermarket or warehouse, and therefore it will not be difficult to get them. They are made of wood, which is very good for the interior. This tree can be varnished, which will greatly change its appearance.

Take two such pallets, or pallets, whichever is more convenient for you, put the first with the legs up, and put the second on top so that the legs converge. They can be connected additionally with self-tapping screws, and put a sheet of glass on top of them. The option is very beautiful and easy to implement.

As you already understood, I prefer options when you do not need to deal with the work of furniture companies, and cut out all the details, and then adjust them. I am more interested in creative and fresh solutions.

For the second option, only four old boxes will be needed, which, when placed on their side, must be connected to each other clockwise. We cover them with varnish beforehand, connect and that's it - the table is ready. The empty space inside can be closed with a tree and a flower can be placed on top. Good luck with your choice.

Diy photo of coffee tables

Do you love designer items, but sigh in frustration looking at the price tags that adorn them in stores? Try to become a designer yourself. Do you think this is difficult? Nothing like this! Following the instructions, you can easily create do it yourself original a piece of interior from scrap materials. And we suggest starting with coffee table - such an uncomplicated, but very important subject furniture... Believe me, at such a table you will be happy to give tea to your guests, who will admire your skills. In addition, by creating a coffee table with your own hands, you literally fill your house warmth and put a piece of your soul into it. So it's definitely worth a try.

Do-it-yourself coffee table in a marine style

Idea in the "romantic" style. All year roundwhile sipping your favorite drink at this table, you will remember the warm sea, gentle surf and moonlit path. " Nautical»A table is tenderness, sophistication and originality in the very heart of your home.

How to do it?

1. Take an old window frame and clean it of dust and dirt. If the former glass cracked, insert a new one, and then get rid of the layer of the old paints and sand the surface. Next, remove the metal corners, which additionally fix the parts frames.

Done! Enjoy your creation and bring joy to your guests!

Suitcase table for travel lovers

Highly original solution for an old beloved suitcase, which has seen other lands with you and which you don't want to throw away because of the memories.

How to do it?

First, go to the store where you will need to purchase furniture legs ( wooden or metal). If you want to make a movable table, then you need to take wheels. You will also need plywood, screws and a screwdriver.

Now we make markings at the bottom of the suitcase for future legs and drill holes. Since the legs cannot be attached to the fabric, we put plywood inside the suitcase, make markings on it through the holes and also drill it. Now we attach the mount to the bottom of the suitcase and attach the legs. Using hot glue, glue the felt inside the suitcase.

To give the table an original look reminiscent of distant travels, you can decorate it with stickers made in the form of stamps, or decorate at your discretion.

That's all - the unusual coffee table is ready! By the way, there are a lot of options for turning suitcases into tables: by choosing legs to your liking, you can make a table in style retro or classical... You don't have to attach the legs at all if you have a massive suitcase - it will look truly incredible: such a table will bring to the interior a sense of adventures and adventures, the spirit of travel and unknown distant countries.

Log table for nature lovers

We take wooden beams (in this case, birch) of the same height and width, 32 pieces in total. You also need to take a base for the table, legs (4 pieces), putty to match the wood, a screwdriver and glue designed for wood surfaces.

First you need to assemble the base for the table, then glue wooden beams around the perimeter, and sew up the middle with cardboard. Then we screw the legs to the bottom. Next, glue to inner surface thin wooden dies - thanks to this, it will seem that the table is completely wooden. Now we take the putty and carefully fill up all the voids, and then we rub it until an absolutely flat surface is created. Voila! Now you are the owner of an extraordinary table that will become the highlight of your interior.

If you like the idea, you can create other tables according to this scheme, using, for example, branches instead of bars. To create such a table, you need to take a plywood box, painted black paint, the size of which is 40x40x60 cm (or any other size at your discretion).

For pasting the frame, we take the branches, from which we first remove the loose bark (we do this with sandpaper). What is the order of pasting: first we glue the branches on the long side of the table, and then we select wooden dies and, how mosaic, put them on the ends. The thickness of the dies should be about 1 cm, they can be cut with parquet or circular saw... And finally - install the glass, which will be the table top. If desired, by screwing the wheel supports to the table, it can be made mobile.

Using the same technology, you can create many more unusual pieces of furniture. You can lay out the branches horizontally and then you get such a wonderful table. Such furniture looks not only very original, but also incredibly stylish.

Original pallet table

An idea that came to mind of someone truly brilliant. It would seem that one can come up with palletsthat are probably lying around in every summer cottage? And you can make a very convenient and functional element of the interior out of them.

How to do it?

To get started, collect all the tools you need for your idea: the pallet itself, a drill, clamps, a hammer, screws, a nail puller, glue for wood, wheels, soap, a primer, a screwdriver. In addition, use paint brushes, a petal drill brush, varnish, and a colorless primer.

First of all, you should take a drill with an attachment designed for wood processing, and clean the surface of the boards from dirt. Now carefully disassemble the sanded pallet into pieces. Use a large hammer to lightly knock out the rusty nails and carefully pull them out with a nail puller. Glue the broken pieces of boards with wood glue. Clamps are needed at this stage. They need to gently grip the boards and wait until they dry out.

Now the parts prepared for the countertop need to be nailed and glued on the back side, then clamp them with clamps and wait until they dry out.

Then cover the table with a colorless primer, and then varnish. Next, on the back of the table, mark the places for the screws to attach the wheels. Drill the holes for the fasteners. To make the screws easily enter the wood, lubricate them with soap. Using the ratchet wrench, you can quickly and conveniently tighten the hex head screws.

Stylish, compact and quite functional table is ready!

Drawer table

One more original idea captivates with its simplicity and unexpectedness - well, who would ever dream of building a table from boxes? But it has come, and now you yourself can create such an unusual piece of furniture at home. Surely you yourself will be delighted, and your guests will appreciate the originality of this idea at its true worth.

How to do it?

Take 4 wooden boxes, sandpaper, water-based varnish, roller and brush, dowels, 10 mm plywood sheet, PVA glue, 4 wheels and self-tapping screws.

First you need to oshuk the boxes and varnish them. Then, using a drill with an emphasis, make holes at the ends of the boxes. With the help of wood glue, you need to fix the dowels at the attachment points and connect the ends of the boxes to each other. Attach the wheels to the plywood sheet, and then attach the sheet to the boxes with self-tapping screws. The table is ready!

Such extraordinary things can be created from quite ordinary materials. Having imagination and a desire for originality and comfort in your home, you can easily work wonders. Look around: maybe the old window frame has every chance of turning into an interesting element of the interior?

Or maybe a huge wooden reel from an industrial cable that can become an elegant piece of furniture?

How and from what to make a cool table with your own hands

Many people dream of decorating the interior of their apartment with exclusive and interesting designer pieces of furniture. The stores offer a huge number of such interior items, but their prices are often simply fabulous. If you try a little, you can do some things yourself. For example, from various materials at hand, excellent coffee tables are obtained, which will become a real decoration of any interior and a source of pride for homeowners.

Side table in nautical style

In order to independently make a coffee table in nautical style you will need an old window frame, which must first be cleaned of dust and dirt. Then, if necessary, insert new glass into the frame, clean the surface of the structure from the paint and sand it with sandpaper. The surface of the frame should be coated with acrylic paint or white enamel.

To make the legs, you will need a shank, which must be cut into 4 equal parts. To remove all roughness and unevenness, sand the surfaces of the legs with sandpaper. As a basis, you can use furniture board or a board whose width does not exceed the width window frame... The legs are attached to the base with long screws. Also, the base with the legs is attached to the frame with self-tapping screws.

Since the frame is an empty transparent box that can be filled with attributes nautical theme: pebbles, shells and souvenirs brought from rest. In order for the table to have a complete look, its legs can be braided with a thin rope.

Suitcase table

The original table will also turn out from an old suitcase. For such a piece of furniture, you will need to purchase furniture legs. They can be both metal and wood. If you use special casters, you can get an original model of a mobile coffee table. You will also need a screwdriver, screws and a piece of plywood for work.

First of all, it is necessary to cut a rectangle out of plywood, the dimensions of which must correspond to the width and length of the bottom of the suitcase. Plywood is placed on the bottom of the suitcase and the legs are marked. Using a screwdriver and screws, the legs are attached to the base of the suitcase. Then felt is glued to the base, inside the suitcase. The table is ready.
There are many different options turning an old suitcase into a coffee table. With the right legs, the table can be made in a classic or retro style.

Log table

Making a table from logs is also not difficult at all. This will require small logs of approximately the same thickness and height (32 pieces). You should also prepare the base for the table, 4 wheels for furniture or legs, putty, glue suitable for wood, and a screwdriver.

First you need to make a base for the table, along the perimeter of which there will be logs. The middle of the warp is sewn up with cardboard. Legs or castors are attached to the underside of the base. In order for the table to appear completely made of logs, small round dies must be glued to the surface of the cardboard. All voids formed between the dies are covered over and carefully rubbed over to create a smooth surface of the table. You can decorate such a table with branches.

Instead of a large number of small logs, you can use one thick cut of a log to make a coffee table in this way.

Pallet table

Even the most common pallets that can be found on each pallet make an excellent coffee table. For work, you need to prepare:

Wooden pallets;
Hammer;
Drill;
Nail puller;
Clamps;
Glue;
Screws;
Screwdriver;
Legs or castors;
Primer;
Soap.

First of all, the surface of the pallets must be cleaned of dirt. To do this, you can use a drill with a wood attachment. Also, using a nail puller, you should get rid of old nails and disassemble the pallets to pieces. All damaged and broken pieces of boards must be glued together. Gently clamp the boards with clamps and let them dry well. Then glue the prepared parts of the countertop on the reverse side and again with clamps. After complete drying, the surface of the table must be covered with a layer of primer and then varnish. It is necessary to attach wheels or legs to the back of the resulting table. In order to make it easier to fix the screws to the table, their surfaces can be rubbed with ordinary soap.

After all the work done, you will get a functional, stylish and compact table.

DIY cool table ideas photo

The choice of ready-made tables in a furniture store is huge, and it will not be difficult to choose the model that fits perfectly into the interior. But it's even easier and cheaper to make a coffee table with your own hands. This does not require either expensive materials or special tools. And all the work even for a beginner in carpentry will take a maximum of two to three hours.

DIY coffee table

Since there is a wide variety of wood coffee tables, drawings of several models will be given below. They differ not only in appearance, but also in the complexity of execution.

Rustic style

For the manufacture of such a piece of furniture, it is undesirable to take glued wood. The table will look really gorgeous if you make it from solid oak, hornbeam, boxwood. But since these types of wood are very expensive, they can be replaced with birch, spruce or ash. A big plus will be the use of old boards, bearing the imprint of time, or artificially aged. Such material should not be painted or varnished, it looks harmonious in itself.

Blueprints

This model does not require strict adherence to diagrams and instructions. It is easy to make, changing all sizes at will. The initial parameters are shown below.

All values \u200b\u200bare in inches. If it is not possible to get a ruler or square, with markings in this metric system, you need to convert them to centimeters. To do this, it is enough to multiply the quantity by 2.54.

Materials

For manufacturing you will need:

• Boards at least 3 cm thick.
• Self-tapping screws.
• Wood for carving thorns.
• Joiner's glue.
• Paint, stain and varnish (optional).

Tools

In the process of work, you can not do without:

• Fraser.
• Knife saw.
• Screwdriver.
• Electric drills.
• Chisels.
• Grinder or emery.

Step-by-step instruction

In the process of work, you will have to sequentially perform the following operations:

1. Training. It consists of three stages:
   1. Draw the boards, marking the location of all parts.
   2. Cut parts along the drawn path.
   3. Sand each saw cut with sandpaper or grind it. If the surface of the wood is rough, it should also be brought to full smoothness.
2. Creation of technological holes. The task is to drill them out in places where the parts will be held together with wooden spikes. These are the connection points of the legs with horizontally laid transverse side strips in the lower and upper parts, as well as the joints of the planks that make up the tabletop. To facilitate the work, the tabletop can be assembled not on spikes, but using several rails attached from the inside with self-tapping screws and glue.
3. Cutting thorns. Focusing on the diameter and length of the resulting holes, wooden spikes are harvested.
4. Assembling the product. It is carried out in several stages:
   1. First, the countertops are mounted to each other. Regardless of which connection is used, on wooden spikes or on battens nailed across, the use of glue at the joints will not interfere. The main thing is to make sure that drops of glue do not leak onto the front side.
   2. After that, the legs and side strips are assembled, the bottom shelf and decorative crossbars on the sides are mounted.
   3. The tabletop is screwed to the upper side strips with self-tapping screws.

Unusual

Those who have purchased a sofa without armrests will really like this table. You can put a laptop or a cup of coffee on it, and put things that you want to keep close at hand. Since the lower part goes under the sofa, it does not take up extra space, and if necessary, you can turn it upside down, and it will turn into an ordinary coffee or children's table.

Blueprints

Dimensions are in inches. To convert them to centimeters, you need to multiply by 2.54.You can change the width and length of the elements according to your individual needs.

Parameters of the main parts:

Internal vertical bar for additional support:

Materials

To create such a convenient and useful piece of furniture, you just need:

• Boards.
• Self-tapping screws.
• Joiner's glue.
• Paint, varnish, stain can be used as desired. If the interior is made in boring colors (gray or beige), it is recommended to make the table bright and add a few more accent pieces of the same color to the room. These can be curtains, pillows, a flower pot.

Tools

Tools can be found at home for any person who loves to make something out of wood with their own hands:

• Saw-hacksaw.
• A sander that can be successfully replaced by sandpaper.
• Screwdriver.
• Glue brush.

Work description

There is nothing difficult in making such an unusual coffee table. The work will take little time and require almost no special skills:

1. Cut out the material. Details are drawn on the boards, guided by the drawings. You need two identical pieces for the top and bottom, a longer vertical piece, a vertical inner bar, and four small strips to create a “leg”.
2. Sawing out. Cut out all the details with a hacksaw.
3. Grinding. Remove all splinters and roughness on cuts and other parts of the parts using a grinder.
4. Decorative processing. Parts are covered with stain, paint and / or varnish.
5. Assembly. All elements are interconnected according to the scheme. Since heavy loads on this table are not provided for by its design, you can only do with the use of wood glue. For reliability, it is worth screwing in self-tapping screws in several places.

If you need a colored table, but there is no way to use varnish and paint, and then wait for them to dry, it is better to use a self-adhesive film.

Making a transforming table

The convertible coffee table easily turns into a dining table or work surface. Making one with your own hands is no more difficult than usual, but using it is much more convenient.

When folded, the table looks like a rectangular cabinet, and when unfolded, its table top becomes higher and doubles.

Blueprints

Drawings are for wooden table elements only. It makes no sense to do the transformation mechanism with your own hands, since buying a ready-made one will be cheaper and will significantly reduce time costs.

Tools and materials

To make a coffee table-transformer, you will need the following tools:

• Screwdriver.
• Knife saw.
• Electric drill.
• Sander.
• Electric jigsaw.
• Square or ruler.
• A simple pencil.

Of supplies should prepare:

• Boards from natural wood or MDF, chipboard, OSB panels.
• Self-tapping screws.
• Metal furniture corners.
• Loops.
• Optional - varnish, paint and stain.
• Brushes.
• Joiner's glue.
• Sandpaper (in the absence of a sander).
• If glued wood panels are used, you will also need a special thermal tape for decorating the edges.

Completing of the work

Before getting to work, you should find a transformation mechanism suitable for the size on sale. To make the finished table convenient to use, even in the store you need to check the smoothness of the movement, make sure there are no squeaks and stalls.

When all the materials and tools are prepared, you can start making the table. This process consists of several stages:

1. Wood marking. Using a pencil and a square, lines are drawn on the boards to indicate the edges of the parts. You can immediately number each element so that later you do not get confused during assembly.
2. Cutting out parts. Using a hacksaw and a jigsaw, parts are cut out along the outlined lines. This work should be done carefully, as one awkward movement can ruin the material.
3. Grinding. Every detail is processed with a grinder until it is absolutely smooth. There should not be a single splinter on the boards, which can then be caught by clothes or injured.
4. Stain impregnation. This is done in one or several layers, depending on the desired color of the wood. Wait for the previous one to dry before applying each subsequent layer.
5. Painting or varnishing. After staining, the parts are varnished. If it has not been used, you can paint them in any desired color.
6. Assembling the product. Guided by the above diagram, the table is assembled using self-tapping screws, gluing all wood joints with wood glue for reliability. The supporting sidewalls are also reinforced from the inside with furniture corners. The two parts of the tabletop are fastened together with loops so that the protruding part of the loops is on the seamy side and does not spoil the appearance of the unfolded table.

Countertop decoration

To give the table more personality and make it unique, you can decorate the countertop. The most popular options are aquarium, decoupage, mosaic and craquelure.

Aquarium

The countertop-substrate is made with small bumpers on the sides, various shells, sea stones and other decor are laid on it, and then filled with epoxy resin. By the way, it is not at all necessary to decorate the tabletop in a nautical style; you can create any compositions that fit the interior.

Decoupage

Decoupage allows you to decorate the countertop with any pattern you like. Ready-made pictures can be bought in a store, they only need to be glued to the surface and varnished. They also use paper napkins with pictures and even print pictures on a printer.

The decoupage technique is performed as follows:

1. The napkin is peeled and nail scissors cut out the part that will be used for decoration.
2. The cut piece is placed face down on a plastic bag or cling film.
3. Swipe over the napkin with a damp brush (not dry and not so wet that water drips from it).
4. The part of the countertop where the drawing will be located is smeared with glue, then a napkin is placed on top of the glue layer with the wet part down and slowly peel the paper from the polyethylene using a brush with glue.
5. When the drawing is completely transferred to the table, it is covered with another layer of glue.
6. If wrinkles appear, they are eliminated by ironing them with an iron through tracing paper.
7. You can draw outlines with paints, add shadows.
8. After finishing work, the worktop is varnished.

Mosaic

Decorating looks very original and expensive mosaic tiles... You can buy everything you need to work with mosaics in a craft store, but you should come up with a pattern yourself.

Craquelure

A beautiful web of randomly spaced cracks forms on the surface of the countertop, if you cover it with a special craquelure varnish, which is sold in construction hypermarkets and large stores with handicraft goods. This method can be used both by itself and in combination with mosaics or decoupage.

A coffee table, made with your own hand, will become not only a wonderful addition to the interior, but also a reason for pride. After all, not every home has such unique and inimitable furniture.