The nuances of choosing an entrance door: choose, but check. How to choose an entrance metal door Steel entrance doors how to choose

Choose entrance doors- responsible job. There are many parameters to consider: style, material, safety, insulation. By the appearance of the entrance structure, you can tell a lot about the owners. But the most important thing is compliance with operational conditions. It must be durable, strong, reliable. You should not buy cheap options - they will not provide proper security, and will also require large investments in regular repairs.

Many do wrong, choosing a canvas solely in appearance. Of course, design plays an important role, but the quality and technical condition of the structure are of greater importance. The question arises - how to choose the front door.

• corrugated board;
• mineral wool;
• Styrofoam;
• polypropylene;
• foamed polyurethane.

When choosing, you need to evaluate the material according to the following parameters from the list:

• providing the fabric with additional rigidity;
• high level of noise reduction;
• low thermal conductivity;
• compliance with environmental standards;
• fire protection;
• hydrophobicity;
• price.

If all the parameters are met, then such a door will be a reliable barrier for a long time. This will provide comfortable living conditions.

Thickness

The thickness of the canvas directly depends on the type of protected object. For apartments in an apartment building, 6-7 cm is enough. A smaller thickness is suitable for utility rooms. It is 4-5 cm. To protect a private house optimal value- 8-10 cm. Thicker canvases are mounted in banks and storages and have additional levels of protection.

It is important to select a door according to the thickness of the metal. For an apartment, it is better to opt for 2 mm. This is because the steel frame will have allowable weight and will not create excessive pressure on the canopies. It is able to withstand deformations and will not create difficulties during installation.

With a smaller thickness, the level of safety is reduced. Thin metal will not withstand a reliable lock and high-quality fittings.

To protect a private house, the thickness of the metal should be greater - about 3 mm. Thicker sheets up to 5 mm can withstand even firearms.

Selection of the front door for the interior

When the main technical characteristics are selected, the design of the input structure is selected. Previously, the door performed an exclusively protective role and people did not think about which entrance doors would best suit the interior. Now it's separate element design, which is selected as carefully as different kinds coatings. Buying non-standard option it must be remembered that the service life of the front door significantly exceeds the time of operation of wallpaper and decoration. Therefore, it is better to buy a neutral model so that you do not have to change the door when changing the interior.

Choice of colors and textures

There are many input structures on the construction market. They have different exterior and interior finishes, texture and color ratio. If the door is intended for a private house, it must fit into the facade and be in harmony with personal plot. When choosing a color, follow the following principles:

• type of building - office, apartment, state structure;
• interior decoration of the premises;
• general style;
• type of lighting in the hallway;
• terms of Use;
• care opportunities.

Often the front doors have a different texture - outside metal carcass, and inside the finish is made of MDF. The outer texture should match the facade of the building, while the inner texture should meet the requirements of the interior.

The combination of doors with interior styles

Each interior style dictates its requirements for the style of the room. If the apartment is made in a single design, then the front door should support it. There are no strict requirements that the canvas must be in harmony with the color floor covering, walls or furniture. But it is better when it does not stand out from the interior, but, on the contrary, adds sophistication.

Loft

Industrial style is popular among designers. It looks equally good in large rooms and in small apartments. Regardless of the size of the room, the loft has its own rules for entrance doors:

1. The massiveness of the structure.
2. Use of materials of natural origin - glass, wood, metal.
3. The presence of the effect of an aged product.
4. The presence of modern details.
5. Conciseness of color: gray, white, brown, black.
6. Lightweight design for easy opening.
7. Use of unique non-standard parts. For example, metal and glass inserts, forged elements.
8. Careless appearance.

The illusion of the absence of any design should be created. Despite the easy perception of the loft, it is difficult to create such an atmosphere. It is necessary to carefully consider every detail, and especially the front door. It is she who is the first thing that guests see when they enter the apartment.

Classic and neoclassic

Classic design is always in fashion. It is followed by conservative people who do not want to follow trends. modern designs. For entrance doors classical style characteristic:

• wood as a frame and finish;
• carved details;
• decorative elements in the form of forged metal monograms;
• fittings in the color of precious metals - brass, bronze, gold;
• glass inserts and stained glass windows.

Often there are mirror surfaces in the interior decoration, and on the outside it is mounted decorative lattice from metal.

High tech

High-tech style is known for its practicality and minimalism. Input structures often do not have additional elements. Their appearance is strict and concise. Geometry acts as a decor - the use of circles, intersections of lines at right angles, asymmetry.

Attention! Hi-tech does not support an abundance of colors, so when choosing interior decoration one or two contrasting colors are allowed.

Often designers suggest using glass and metal in decoration. It matches the style of the direction and looks modern.

Location of the door

Depending on the operating conditions, the front door must have certain parameters. They depend on the required values ​​​​of sound and heat insulation, on the impact external environment and the type of room. Doors installed at the factory are not suitable for apartment buildings. Also canvases for apartments are not installed in private homes.

Vacation home

Entrance street doors must be safe and durable in order to withstand the effects of the external environment. The thickness of the steel is 2.5-3 mm, and the design must have additional stiffeners. The filler of the frame retains heat and provides a high level of sound insulation. Particular attention must be paid correct installation and sealant quality. Inhabitants country houses prefer armored structures for increased security.

Apartment

Doors to the apartment are equipped with a secure lock. To prevent smells and sounds from entering the house, good insulation is needed. Steel thickness - 2-2.5 mm. It is necessary to have a high-quality insulation so that the structure does not freeze through in winter and works as usual. To protect the apartment from penetration, it is better to install anti-removable pins and armor plates on the bolt mechanism.

industrial premises

The main objectives of entrance doors in production are safety during a fire and protection against burglary. Often they do not have a design and are referred to as construction doors. The material of the frame, seals and insulation should not be toxic and flammable. Doors should not create obstacles for a continuous workflow.

How to choose a manufacturer

When choosing the best entrance metal door from Russian manufacturers, they pay attention to the availability of quality certificates and consumer reviews. Sometimes you can evaluate the rating of popular entrance doors on sites. The following manufacturers have proven themselves well on the market: Torex, Bulldors, Guardian, Elbor, Argus, Bravo, Outpost. It is better to buy directly from suppliers.

The choice of an entrance door depends on design, quality, conditions of use. In order not to regret the choice made, you need to think through all the nuances in advance. High-quality construction will last a long time and will please the look.

Choosing the front door to the apartment is not an easy task and raises many questions. You need to know what qualities the design should have, what to look for when choosing. The front door is the keeper of the hearth, preventing noise, cold and uninvited guests from entering the housing. It should also look presentable, as it acts as the hallmark of the apartment.

Requirements for the entrance door to the apartment

Any premises, residential or industrial, meet the visitor with the front door. It is not difficult to choose the front door of internal opening to the apartment now. Nevertheless, manufacturers offer a wide range of products, the difference between which is in materials, dimensions, colors and styles.

Many people are not able to make a competent choice due to the large variety. This is especially true for those who buy entrance doors to the apartment for the first time. To avoid errors, you should take into account the requirements for any input structures:

1. General reliability parameter. Entrance doors perform many functions, but the main one is to ensure the protection of housing. For this reason, the design chosen must be durable and of high quality, able to protect against intruders.
2. It should be possible to inspect the outer territory. It is better if the front door to the apartment is equipped with at least a small peephole. This will allow you to see the situation outside the housing or on the flight of stairs.
3. Noise and heat insulation. The product prevents the penetration of noise and cold into the house, increasing the comfort of living.
4. Appearance. It is better to choose a beautiful front door to the apartment so that it fits into the interior of the home with its style design.

Before you go to the store for a purchase, you need to consider other points:

1. Canvas price. It all depends on the quality of the design. If you choose a door for suburban area or in an old abandoned apartment, it is not necessary that it be high-strength. Cheaper alternatives will work as well. But if the product is installed in a new building apartment or a residential country house, then more expensive variations can be considered.
2. Opening dimensions. The canvas should easily "enter" the doorway. Therefore, before buying, you should take all measurements in advance.
3. Choice of accessories. We are talking about locks, hinges, eyes, handles and so on. It takes into account the type of construction and your own preferences. Of course, it is better to choose the appropriate fittings for a good entrance door to the apartment, suitable in quality and style.
4. Availability of certificates and guarantees. This is an important point at the time of purchase, ensuring that all installation and operation issues are resolved.

Types of entrance doors

A wide range of input structures is presented on the construction market; designer canvases and technical models are also produced. They are classified according to the material used in the manufacture.

metal front door

This is the most requested type. They are made using special technology from durable materials. There are models that are additionally coated with an anti-corrosion compound, which allows the blades to be operated at different climatic conditions extending their service life.

The thickness of metal sheets also matters: for European entrance doors it is 1 mm, Chinese - from 0.5 to 1 mm, domestic - from 1.5 to 3 mm. The strength characteristics of the input structure depend on the thickness of the metal. European models have standardized sizes, while our manufacturers also produce non-classical options.

The customer can choose the design and format of insulation.

Before choosing metal door to the apartment, you need to familiarize yourself with the classification according to the level of complexity:

1. Economy class. These are simple and affordable products made of single-sheet steel with a thickness of 1 mm. As a design, only painting is used, without insulation and soundproofing. A separate variety is metal sheets in an apartment, assembled from two sheets (each 1 mm thick). For such products, finishing, heat and sound insulating filler is provided.
2. Middle class. These are products made from two sheets, where the thickness of each is 1.5 mm. Finishing can be any and depends on the preferences of the customer.
3. Elite class. Entrance doors with a reinforced structure, with a thickness of sheets up to 2 mm. They are finished with natural or artificial materials, sheathed with wood, veneer.

As a finish, use: thermal film, polymer or powder paint, plastic or wooden lining, vinyl leather, car enamel, varnish, MDF lining and other materials.

Important! In order for the selected metal front door to successfully fulfill its functions, it is important to install it correctly.

wooden front door

Not so long ago, wood was used as the main material for the production of entrance structures. Now the user has a choice where each product differs in its operational properties. Nevertheless, wooden canvases belong to the luxurious and practical classics. Thanks to innovative technologies, their functions and properties have been improved by an order of magnitude compared to the first models, as a result they last longer.

Wooden products are no longer as popular as they used to be, this is due to the fact that a large selection of artificial materials is offered on the market. But some customers prefer natural array tree. Considering the design features, three types of wooden entrance doors can be distinguished:

1. Shield. To assemble these products, shields up to 4 cm thick are used. The frame is assembled from solid wood elements glued together. Some manufacturers supplement such entrance doors with an aluminum frame, which not only retains heat, but also extends the life of the product.
   
   
2. Paneled. In terms of design, they are similar to shield ones. They weigh an order of magnitude less, which facilitates transportation and installation.
   
   
3. Whole. This option is now the most common. For manufacturing take a solid array of wood.
   
   

What materials are wooden doors made from?

1. Oak. This is a high-strength and durable breed that can last for several decades. Interesting feature- oak hardens over time, which makes the canvas even more stable. The result is the most expensive entrance doors to the apartment.
   
   
2. Ash. By analogy with oak, durable and practical material. A popular option due to the variety of colors.
   
3. Beech. It is better to install such a door to an apartment in a multi-storey building. Beech does not tolerate moisture, so it is not used for country houses.
   
4. Pine. Key advantage - affordable price. Pine is a soft material, so canvases from it are made purely for apartments.
   
   

Wooden doors to the apartment are preferred by those customers who prefer environmental friendliness and natural appearance.

Entrance door to the apartment with a mirror

This species is gradually gaining popularity. Many customers prefer just such entrance doors to the apartment, explaining the choice by the small size of the hallway. Now the mirror can be mounted in both wooden and metal products.

The front door with a mirror looks organically in any interior, often acting as a key element of decor. The design is interesting for its decorative effect, but it can also perform other functions:

1. Practicality. Leaving the apartment, you can always look in the mirror, evaluating your appearance. Of course, for this you need to correctly place the light sources so that the light falls on the person.
2. Visually enlarges the space. Light, reflected, creates the illusion of a large corridor.

Important! To ensure the desired effect, it is necessary to carefully choose the shape and size of the mirror to be installed. This will emphasize the style of the apartment and decorate the interior.

The mirrors themselves are practical products. Indeed, in a small hallway, it is sometimes difficult to place a separate large mirror. But the door panels are just the right size.

The width of the entrance door to the apartment

Standard dimensions are defined by GOST standards, regardless of the material of construction. The main parameters are as follows:

1. Height. The standard parameter is in the range from 2070 mm to 2370 mm. To determine a specific value, the total height of the ceiling and the width of the door leaf are taken into account.
2. Width. The minimum parameter is 910 mm. For single leaf - 1010 mm, one and a half - 1310, 1510 and 1550 mm, double - 1910 and 1950 mm.
3. Thickness. There are no strict regulations regarding this value, since it all depends on the material of the canvas for the apartment. The thickness should be enough for the front door to perform its main functions.

Important! For entrance structures standard size more than for interior. They do this so that a person carrying a load can freely pass through the opening.

How to choose entrance metal doors for an apartment

Most common metal constructions. Most often, a steel door to an apartment is chosen, which provides adequate protection for housing. There are both global and domestic manufacturers on the market, producing products different styles and sizes.

Metal has long been used to make entrance doors to an apartment. This is the most durable material that provides protection against burglary. For this reason, it is popular for both residential and industrial premises. When choosing an iron door to an apartment, you should pay attention to the base material. For the manufacture of products using the following metals:

1. Aluminum. Such products are different in texture and shades. Aluminum is a metal that is easy to process, so making entrance doors from it is somewhat easier.
2. Steel. This metal is more reliable and durable. In addition to the main function, such entrance canvases are equipped with noise and heat insulation. At a price they are more expensive than aluminum counterparts, but the quality is better.

When choosing a product for an apartment, pay attention to the thickness of the base layer - the more, the better design protect housing. Only two materials are used as the basis, but the products differ from each other due to the decorative layer. As a decor used:

1. PVC panels. Caring for such a coating is quite simple.
2. MDF. In addition to environmental friendliness, this material provides good sound insulation. The most preferred option for office space.
3. Powder coated. Budget exterior.
4. Panels made from natural wood. Expensive, but environmentally friendly and visually appealing option.

To increase the mechanical characteristics of the entrance door to the apartment, manufacturers equip products with stiffeners. These elements provide protection against deformation and increase burglary resistance. The more stiffeners, the more stable the structure will be. It should be understood that due to the increase in the number of these elements, the weight increases, which means that the hinges will experience increased loads and will fail faster.

What color to choose the front door to the apartment

When choosing a color, it is necessary to take into account the general style of housing design, the color of the floor material, walls, and basic furniture. The right tips to help you choose the color of the front door to the apartment:

1. The best solution is to choose a neutral shade that will go with nothing. White, black, gray or beige options look good.
2. It is optimal if the color of the canvas matches the shade of the window frames.
3. Doors decorated with drawings, stained-glass windows or stickers look good. The slope is done on design decoration, so compatibility is relegated to the background.

Important! These tips are suitable for choosing the entrance canvas to the apartment, as well as for interior partitions.

Rating of entrance metal apartment doors

The most popular designs of the following brands:

1. Outpost. This manufacturer produces products at a reasonable price. The company is originally from Russia, but production is organized in China, which made it possible to optimize costs. The manufacturing process is controlled, so the products are of good quality, unchanged technical parameters and appearance.
2. Torex. The company has been producing entrance doors to apartments for over 25 years. Thanks to solid practical experience, the fabrics produced have good consumer properties, without overpayment. The range includes fire protection options.
3. Elbor. The year the enterprise began its activity is 1976. Not so long ago, a comprehensive modernization of the company was carried out, which made it possible to increase production capacities.
4. Guardian. A distinctive feature of the products of this company is the high price, but consumer properties correspond to the premium class. For the manufacture of entrance doors to the apartment, strict international and domestic standards are taken into account.
5. Became. This is a group of companies that produces entrance canvases according to individual orders. A feature of the products is additional concreting, thanks to which the box is attached many times more reliably, while maintaining tightness.

Is not full list companies engaged in the manufacture of entrance doors for apartments.

Where should the front door to the apartment open?

In this matter, there is a main requirement - in the event of an emergency, the structure should not create obstacles for the evacuation of people. If we consider the practical side, then take into account several points:

• when opening inward, you will have to stop in front of the door and step back to open it;
• the canvas that opens outwards is characterized by burglary resistance, since it is much more difficult to knock it out;
• if the product opens inward, it will not be possible to put an additional door, which will not only keep the heat in the apartment, but also reduce the noise level;
• if the room has a small entrance hall, it is better to choose the option of opening to the outside.

In case of apartment buildings also take into account the following points:

• when plowing outside, the canvas should not interfere with the opening of the neighbor's doors;
• if the apartments open to a common vestibule, then the vestibule door is opened outward, and the entrance door is opened inward;
• if during the opening the door touches something, for example, a counter, then it is supplemented with an opening limiter.

For the most part, where the canvas will open is the decision of the owner of the apartment.

Conclusion

Choosing an entrance door to an apartment is not a problem, as there are many proposals: these are metal, wooden products or structures with mirrors. The main thing is that the door provides adequate protection for the apartment and at the same time matches the interior of the room. You can take into account the rating of the entrance metal doors to the apartment, but it is equally important to properly install the canvas.

Quality iron doors the best option both for apartments and private houses. They are durable due to different ways finishes are attractive. But there are a lot of manufacturers, which complicates the choice for buyers. Before purchasing, you should familiarize yourself with the rating of the best manufacturers iron doors find out their strengths and weaknesses. We bring to your attention the top of the best steel doors on the Russian market.

Entrance doors of different brands differ in the materials used, production technology, hardware features and price. The reliability of the design directly depends on the cost. Iron doors are usually divided into products of the middle price segment, premium class, as well as budget ones. The most affordable designs are purchased infrequently. Since too thin metal is used for their production, such an entrance door cannot be reliable.

To rank the entrance metal doors in 2018, the opinions of experts and consumer reviews are taken into account. What matters is the experience and popularity of the company, the width of the product range. In the middle price segment, Outpost, Neman, Stal, Bravo are considered the best. In the premium segment, the rating of the best iron doors includes the brands Guardian, TOREX, Elbor. These are Russian manufacturers of doors, the quality of which is not inferior to imported products.

outpost

The steel door rating 2018 is headed by Forpost products. The first products were released by this company in 1998. Starting in 2009, production was moved to China to reduce manufacturing costs. This made it possible to produce annually 500 thousand units of goods. Unfortunately, low-quality fakes have also appeared since that time. Therefore, when buying an entrance system, you should always ask for a certificate, clarify about the guarantee, and purchase iron doors only through official representatives.

Forpost metal doors are included in the review due to such advantages:

• low price (even for the most elite models);
• a wide range, products can be selected for a private house and apartment with a different interior;
• a sufficient number of service centers, so if necessary, you can seek advice, call the master at home.

Forpost iron doors have their drawbacks. First of all, this applies to fittings, which are manufactured at the same factory. It is difficult to replace it with other analogues. Noise isolation is present only in some models. Also, do not forget that there are fakes.

Groff

This is one of the brands of Bravo, a well-known iron door company. It is she who continues the rating of metal doors for an apartment in 2018. The main advantage of Groff products is the use of steel of considerable thickness. In addition, the structure is reinforced with stiffeners. Non-combustible mineral wool is used as a heater.

The manufacturer pays attention to the aesthetic indicators of their products. Due to the combination of appearance and strength, Groff are considered one of the best entrance metal doors. All products are guaranteed for up to 10 years, during which the service department is obliged to maintain the structure installed in the house or apartment.

Bravo

Bravo is considered one of the leaders Russian market iron entry systems. Entrance metal doors are in the top of the best, according to consumers. The company is ready to provide customers with more than 350 various models, including those made using a unique 3D technology.

The main advantages of the input structures of this brand:

• there are available models with veneer finishes;
• reliable and high-quality steel doors;
• excellent protection against drafts due to seals and high quality insulation materials.

At the same time, in the most budget options soundproofing is only average.

Neman

The rating of metal entrance doors is continued by the Neman brand. This is a company that produces truly reliable and safe products. The brand has a wide range of models. The products are reasonably priced. At the same time, the manufacturer pays great attention to the external characteristics of the product. Entrance systems Neman compare favorably with their decorative characteristics from competitors.

For the production of the best steel doors, alloy steel of considerable thickness is used. All models are equipped with two locks, if necessary, their number can be increased. Therefore, there are no questions about the safety of the goods.

In addition to good value for money and interesting design solutions, Neman are included in the top metal doors due to compliance with all safety requirements. This is confirmed by certificates.

Of the minuses, it is worth mentioning only the insufficient strength of the most budget products from this manufacturer.

Became

The rating of steel doors also could not do without the Stal brand. Products from this manufacturer are distinguished by good reliability, a sufficient level of resistance to burglary. According to these parameters, it is a bit like Elbor. However, unlike this brand, the manufacturer Stal does not have a very expensive product. Due to this, the company's products are popular, received a lot of positive feedback from consumers.

Professionals also praise this brand, although there are not the most successful models in its lineup. But in the price segment, this is a noteworthy manufacturer, which is rightfully included in the rating of entrance metal doors to an apartment.

The main advantages of Stal products:

• wide model range;
• many options with the use of various finishing materials;
• good level of service.

The main drawback is the presence of unsuccessful models, which requires careful choice from the consumer. Before buying, you should ask managers about all the technical characteristics.

guardian

The rating of metal doors for an apartment would also not be complete without the Guardian brand. At the plant, iron structures began to be produced back in 1994. Guardian entrance designs are popular with buyers who appreciate beauty. Therefore, they will be useful to those who are looking for something original, who want everything to harmonize in a house or apartment. In terms of safety parameters, there are no complaints about the product of this brand either. Indicators fire safety, resistance to burglary, sound insulation, service life - all these characteristics are confirmed by international certificates.

Among the advantages that made it possible to include the entrance systems of this brand in the rating of steel doors by quality 2018, it is also worth noting:

• the ideal combination of leaf and door frame, the gaps between them are minimal, which guarantees a snug fit of the sash;
• in any price segment there are many models to satisfy the demanding consumer;
• products comply with Russian and international requirements;
• as a web filler, a slab of mineral wool is used - a non-combustible material with high insulating properties.

Everything is good in reliable metal doors Guardian. The only thing that customers are not happy with is the service. If even not the most complex breakdowns occur, then it will not be possible to quickly eliminate them. The service department is no different.

TOREX

A review of steel doors for an apartment would be incomplete without the TOREX brand. This is another popular Russian manufacturer, whose production is located in Saratov. The first products were produced on it during the Soviet Union in 1989. The plant is constantly developing, so the entrance systems have become popular not only in the CIS countries. The company has 8 warehouses.

• good service;
• high quality products;
• compliance with all safety standards, including heat resistance for some models up to 5-6 hours;
• a wide range of products, attractive design products.

The main disadvantage of the products is their considerable cost.

Elbor

The manufacturer of iron doors Elbor is also included in the rating of the best metal entrance doors. The company has an excellent reputation, on which he has worked since the founding of the plant - 1976. At first, the company produced various goods for military purposes, then retrained to protect private property. Due to such specifics of production, all Elbor products are distinguished by the highest resistance to burglary.

The company does not manufacture budget models. All products are made using a special technology to increase their reliability. Coatings are refractory, and the filler inside the sash is non-combustible mineral wool. At the same time, the product has an attractive design. An overview of steel entrance metal doors and high test scores also make it possible to include products of this brand in the ranking of the best.

Imported Fortus and DIERRE products

In addition to products Russian production, the rating of steel doors to the apartment includes popular brands from Germany and Italy. Fortus is fundamentally different from most manufacturers in that it specializes in the production of doors to order. A minimum of finished products and a maximum of opportunities to assemble systems at your discretion. The buyer can choose the number of doors, locks, other fittings, fabric finish, and so on. Due to this, more than 1000 combination options are available to the consumer. This approach allows you to choose the best entrance metal doors for your apartment or country house. Any of them will have high strength, sound insulation, will protect property and heat.

DIERRE is an Italian company that specializes in the production of high-quality entrance metal doors with a special design. The manufacturer follows all the newcomers on the market, introduces the most advanced technologies. In their lineup there are even "smart doors", their control is due to remote control.

High-quality metal doors from Italy are distinguished by high aesthetics, the finishing of the canvas is complemented by exquisite fittings. The cost of such an entrance structure is not available to everyone, but the DIERRE system will be the highlight of any room.

What to consider when choosing?

The brand is not the only parameter that the consumer should focus on. The choice of steel doors should be based on other parameters.

Considering your financial capabilities, you need to pay attention to the following technical characteristics:

1. Locking mechanisms. One lock is good, but good steel apartment doors should have two such mechanisms. Moreover, both are required to have a high class of burglary resistance (3 or 4), and their mechanisms must be different. This approach greatly complicates the work of crackers.
2. Additional protection. Such simple elements as a chain or a night latch should also not be neglected. They enhance the protective functions of the structure.
3. Door hinges. When determining which entrance metal doors are better for an apartment, special attention should be paid to this parameter. Hidden loops are good because they are not visible and it is impossible to cut them off when breaking. However, this design significantly increases the cost of the product.
4. insulating materials. Without filler, even good quality steel doors will let in noise and cold. Therefore, it is worth clarifying what exactly the sash is filled with inside. The best option- mineral wool, able to absorb noise and cold. It is also good for residential premises because it does not burn.

Finishing material is important not only from a purely aesthetic point of view. It must protect the metal surface, be resistant to external factors especially for private houses. After all, even the best steel front doors will be exposed to sunlight, frost and precipitation. For an apartment, it is important that the coating is resistant to minor bumps and scratches.

Buying an iron door for your home is a responsible step. The product costs a lot, should last a long time. Therefore, you should carefully study the rating of iron doors to the apartment, all the parameters of the model you like, trust only well-known brands that have been on the market for many years, and are ready to provide a long-term guarantee for their products.

The front door in the apartment serves not only as a "security barrier", but also as a kind of hallmark of the owners of the premises. It is difficult to decide what to first of all be guided by when choosing: technical specifications design, its appearance or manufacturer rating. How to choose an entrance door to an apartment that will meet security requirements, provide comfort in a living space and satisfy aesthetic needs? To purchase a door that meets these parameters, it will be useful to consider in detail all aspects of the choice.

To decide which front door is better to put, the choice must be justified, first of all, by the good reliability of the structure, the main elements of which are the box and the canvas.

door frame

For the manufacture of the box, manufacturers use a bent sheet, corner or profile pipe. The highest strength parameters have a design made of profile pipe with one weld, since the bent sheet and corner are less resistant to bending, twisting and deformation. But it must be taken into account that the thickness of the metal is also important: the optimal cross section is 3–5 mm. The number of welds also affects the reliability of the door frame: the more there are, the less durable the structure is considered.

The frame must have a threshold. A U-shaped box without a lower link is not able to provide strength to the structure.

mounting hole Mounting plate

For fasteners in the frames there are holes or special mounting plates. The second option is preferable, since it eliminates the possibility of cutting fasteners. There are two options for fastening door frames: anchor bolts or steel pins. As a rule, their number should be at least three on each side. The minimum diameter of the fasteners is 12 mm, the length is not less than 15 cm.

The next element of the box that you should pay attention to is the door porch. It is used for mounting sealing material. On sale you can find designs with one, two and even three vestibules. Since we are choosing a new entrance door to the apartment, it makes no sense to overpay for a complex structure: one porch is enough, but you should not save on the sealant - the better its quality, the longer it will last and provide protection from drafts and extraneous sounds.

An equally important element of the door frame is the platbands. They perform not only a decorative, but also a protective function, blocking access to the mounting elements.

Door leaf

Now let's figure out what parameters to choose door leaf. It consists of a rectangular frame to which the outer and inner panels are attached. The outer panel is necessarily made of steel, but for the inside, manufacturers can use not only metal, but also a panel made of MDF, solid wood, chipboard with veneer, laminated film or leatherette. Since the front door to the apartment does not have to be exposed to atmospheric influences, you can choose any of these options. The optimal parameters for the thickness of the outer steel sheet are 1.5–2.5 mm.

Stiffeners are located inside the door leaf. Their minimum number is three. In low-cost designs, two vertical ribs and one horizontal rib should be present. The highest quality designs are those in which the number of ribs exceeds the minimum limit: two vertical and four horizontal elements will significantly increase the reliability of the front door. At the same time, the more elements the structure contains, the heavier it is in weight, which means that the load on the hinges increases. In order not to subsequently face such a task as tightening loops or replacing worn parts, it is better to choose a product in which the stiffening ribs are made of long rolled products and have a complex profile. They are lighter in weight and more resistant to bending.

Locks

Even the best front doors will not be secure without a good lock. Locking structures that would be impossible to open still do not exist, and yet, two locks various types, breaking which will take a lot of time, are able to repel the desire of an attacker to enter someone else's apartment.

For entrance doors to an apartment, it is better to choose two locks that differ in design. As the main locking mechanism, one should consider a device with crossbars that fix the door leaf in several directions.

Most often on steel doors you can find locks of two designs:

• The cylinder locking mechanism is quite difficult to open, but is not resistant to the use of brute physical force. An armor plate can complicate the process of knocking out the lock.
• With a special tool and certain skills, a lever lock can be opened, but it will not be easy to disable it with the use of force: the structure is located inside the door leaf and takes up a lot of space. The level of secrecy of lever locks is constantly being improved.

Security elements

The opening side of the sash is very important in terms of reliability. The preferred option is external opening. In this case, the sash is much better protected from being knocked out and squeezed out by a jack. The strength and reliability of the front door also depends on small structural elements.

Door hinges

Outer loop Hidden loop

Loops are external and hidden. The outer ones are welded to the rack of the box and the canvas, and the hidden ones are located in special sinuses, which cannot be accessed from the outside. Buying a door with hidden hinges will cost more, but is there a need to overpay? The only drawback of open loops is their location, however, the burglary resistance of the structure does not suffer from this at all. Cutting loops is a noisy process. It is unlikely that attackers will want to draw attention to themselves. In addition, there is such a security element as anti-removable pins that will protect the door from breaking even with cut hinges.

Hidden awnings affect not only the increase in the cost of the door, but also have other disadvantages:

• due to the design features, the width of the doorway is slightly reduced;
• reduce the opening angle of the sash;
• reduce the strength of the frame by organizing a niche inside the box:
• during operation, they can cause deformation of the box when the door is opened at an angle exceeding the parameters allowed by the design.

The next aspect of the choice that the buyer has to face is adjustable or non-adjustable hinge designs, which one is better? In the first case, repair of worn hinges is possible, in the second - no. In fact, adjustable hinges can be an additional problem as they tend to loosen up over time. An unregulated structure cannot be repaired, but ruining such hinges is a difficult task.

When you go to the store to choose a door for your apartment, it is important to make sure that the hinges can handle the load ahead. If the weight of the structure exceeds 100 kg, it is desirable that it be equipped with three canopies. A support bearing must be present in the design of the hinges - it facilitates operation and has a positive effect on the durability of the canopies.

Anti-removable pins

This type of protection is an anchor system. The pins are located on the end sections of the sash. When the door is closed, the anchors are immersed in the holes located in the box. As a result, the door leaf remains fixed in the frame even if the hinges are cut off.

Internal gate valve

This mechanism will provide the owners with peace of mind when they are at home. The latch is installed on the inside of the door and it is not possible to get close to it from the outside. It is operated manually.

Insulating properties

The thickness of the metal, the number of loops and the design of the locks are all technical aspects. No less important is the comfort inside the apartment, which also largely depends on which entrance doors you have installed. The noise of the elevator running tobacco smoke and other "joys" of a densely populated high-rise building do not fit well with the concepts of home comfort and peace. How to choose the right front door to the apartment to protect yourself from extraneous sounds, smells and drafts? These problems should be dealt with by isolation.

Inside the door leaf, the insulating material must tightly fill all the voids between the stiffeners. Since we select doors not for a house, but for an apartment, where the structure will not suffer from temperature and humidity changes, there are no special requirements for the insulation material. It can be mineral wool, polyurethane foam or expanded polystyrene. All these materials provide noise absorption, serve as good heaters.

Hidden loop

Another loophole for noise and smell is the perimeter of the door. It is protected with a rubber or silicone seal.

All these measures will be ineffective if violations are made during the installation of the structure. There should be no gaps between the box and the wall. Of course, no sealing material is able to create perfect silence, since sounds propagate through the walls, but the comfort from installing a high-quality front door will be palpable.

Exterior finish options

When we are trying to decide which front door to choose, the appearance has no less importance than the parameters of strength and cost. Beautiful finish pleasing to the eye and able to decorate the interior, while it would be nice if the design you choose was strong and durable. Consider the advantages and disadvantages of the materials that can be used to frame the front door to the apartment, decide which decorative finish to choose.

Leatherette

Thanks to special fastening pads, which facilitated the process of "upholstering" the steel sheet, leatherette is quite often used as a finish for metal entrance doors. The disadvantage of this material is its poor resistance to mechanical damage. It can be accidentally damaged by a sharp object. Advantages - a wide choice of color options and textures, the ability to create an original pattern on the surface using wire, additional sound insulation through the use of foam rubber or batting as a lining.

Decorative panels

Plastic or wood overlay panels are a relatively new and very popular type of finish. Have a three-dimensional or flat pattern, large color scheme. The strength threshold for this finish is also not very high. Manufacturers offer products with additional plastic coating, but this procedure increases the cost of products.

Painting

The advantages of hammer painting are resistance to mechanical stress and aggressive liquids (as a result, ease of maintenance with the use of cleaning products). Paint attached to the surface bulk structure, easy to apply, dries quickly, has an extensive range of colors. This type of finish is most suitable if you have to choice of front door for a cottage.

Manufacturer rating

Where to buy the best entrance doors to an apartment, and which manufacturers can you trust? Be sure to take into account the fact that large manufacturers, unlike small private companies, provide a guarantee. If you purchase a door from a dubious one-day company, the chance to replace a part that has worn out ahead of time, or even a hidden design defect, is reduced to zero for free. In addition, handicraft products are difficult to check for quality - which doors are strong, what metal thickness was used in them, insulation material, etc., while technical specifications factory products are registered in his passport.

It is generally accepted that European doors are better in quality than products of domestic companies. But do not forget that products, both domestic and foreign, are designed for consumers with different income levels.

• Economy class - products with a low market value, designed for people with low incomes. Meets minimum safety requirements.
• Standard - designs with quality exterior finish are made of durable metal. They have an average level of cost due to savings on fittings and locks.
• Business class and premium class are expensive luxury products that are most often developed on an individual order.

If we take into account such a gradation of products and the cost of delivery from abroad, it becomes obvious that domestic standard class entrance doors will cost about the same amount as economy class products manufactured abroad. And here it is up to you to decide what is more important: reliability, or which company the product has a stigma.

• The Guardian has been manufacturing steel doors since 1994. Offers standard and non-standard products, own fittings. Products comply with GOST 31173-2003. The warranty period is at least three years.
• Forpost offers a wide range of economy, standard and business class products. Many models have hidden loops that are protected from cutting. The range includes reinforced steel doors, 2.2 mm thick.
• Condor - durable, strong, reliable doors. Large model range. Modern design, rich colors. Products have an affordable cost, it is possible to purchase a high-quality door of the “standard” class at a discount sale.
• Torex supplies beautiful models with good sound insulation, high reliability and durability parameters. Production lines are equipped with new imported equipment.
• Elbor is a brand known since 1993. Production is on a wide scale. The products are equipped with fittings of our own production, they have III-IV class of burglary resistance.

Summing up

After a detailed review of how to choose the front door to an apartment, we will compile a short list of the main aspects that you should rely on when buying:

1. The steel from which the door is made must have a thickness of 1.5 to 2.5 mm.
2. The optimal number of stiffeners is 6. Four of them are located in the horizontal direction, two - vertically.
3. The design must have a vestibule.
4. The most durable and durable will be hinges with a bearing. The number of hinges depends on the weight of the sash, if it exceeds 100 kg, the load should be distributed over three hinges.
5. A sealant is needed around the perimeter of the box.
6. The greatest degree of protection against burglary will provide two locks: level and cylinder.
7. The armor plate on the lock and anti-removable pins increase resistance to burglary.
8. The box, which is made of a profile pipe and has only one weld, is considered the most durable and reliable.

We hope that choosing the front door using these tips will be easier for you.

A high-quality and reliable front door is not a whim, but necessary condition for comfort and safety. It is she who protects the calm sleep of the owners of the house, protects their life and property, protects them from cold and noise, and allows you to designate a zone of family personal space. Its strength, ability to burglary directly affects the level of security. At the same time, one cannot fail to note the importance of an attractive appearance, which indicates the good taste and wealth of the owner. Let's try to figure out how to choose the front door to the apartment among the many proposals.

Front door requirements

The product must meet several basic requirements. In addition to the fact that it must be made of durable material that is resistant to mechanical stress, the door must be equipped with:

• at least two reliable locking systems installed with a gap of 30 cm;
• a peephole that guarantees a panoramic view;
• additional longitudinal and transverse stiffeners;
• high degree of noise and heat insulation;
• reliable fastening in the form of U-shaped grips or anchor fasteners.

The aesthetic component is equally important. Ideally, if the door trim is in harmony not only with the interior of the entrance, but also with the interior "colleagues".

Entrance groups of private houses or country cottages must be equipped with additional anti-burglary systems.

Types of entrance doors

The following materials are used for production:

• tree;
• metal;
• plastic;
• glass.

Obviously, durable metal doors are best suited for country houses and apartments. They are installed by the vast majority of owners, as they want to be sure of their own safety. The second in the ranking are wooden doors. These products, as a rule, have additional protection in the form of an iron frame or a steel plate installed as the central layer of the door "pie". Products made from valuable species - solid oak or ash, most often decorate the homes of wealthy people.

Other types of canvases are not able to provide decent protection. They are installed in premises where there is no need to create an insurmountable barrier or where security functions are assigned to the alarm system and special companies.

metal

Metal doors can be divided into aluminum and steel. The former do not have sufficient strength and are more often used in outbuildings - sheds or garages.
Steel blades are reliable, strong and durable. They are equipped with noise and heat insulating layers, additional stiffeners. steel doors can be different thickness and interior filling. The degree of security of the premises from burglary attempts, the penetration of cold and extraneous sounds depends on this. combination various materials improves the technical qualities of the door and affects its appearance and durability.

Application special technologies allows you to make metal doors bulletproof, fireproof, endow them with the ability to absorb vibration vibrations during an explosion.

Wooden

Wooden doors have not lost their relevance due to their natural origin and environmental friendliness. Solid wood products are powerful and respectable, creating an atmosphere of prosperity and inviolability of traditions.

Quality wooden door should allow it to withstand the effects of atmospheric phenomena, block extraneous noise, and provide a high-quality thermal break.

The outer panel is made of wood coated with antibacterial and fireproof compounds. Protective varnishes and paints can be used as a finishing layer. Even if there are no increased requirements for the door regarding its protective properties, it is better if it is reinforced, equipped with seals and a reliable locking device.

The density and weight of the finished canvas depends on the type of wood. The heaviest and at the same time representative, expensive and reliable doors are made of solid oak or beech. More available options, for example, pine, birch are not so strong and require additional reinforcement. Such variations are suitable for installation in a bathhouse or a barn.

With mirror or glass insert

Cloths with decorative inserts made of glass or mirrors give the room lightness and elegance. It may seem that transparent fragments are the "weak link" of the fundamental design and the reliability of such doors is in question. However, thanks to the use of special technologies, such options are in no way inferior in strength to their “deaf brothers”.
The reliability of the glass insert depends on the characteristics of the material. In the production of entrance doors, the following types of glass are used:

• triplex - is a multilayer material;
• tempered - has increased level shock resistance;
• bulletproof - resistance to firearms is ensured by applying a special film.

Glass door

Entrance groups from a double-glazed window initially found their application in the construction of office buildings, shopping and entertainment centers, hospital and sports complexes, small shops and service industries. However, practical and functional doors with attractive and varied designs are gradually gaining ground in the private sector. Proven safety and durability input products from a double-glazed window makes them more and more in demand.

The door design includes a frame made of plastic profile, double-glazed window and plastic panels. Glazing can be made in the entire size of the canvas or occupy 2/3 of the total area. It can be continuous or made up of fragments.

Anti-burglary fittings can be attached to the door, which increases resistance to the actions of intruders. Special hinges are designed to withstand heavy loads.

A multi-point lock secures the frame on three sides and makes the structure more airtight. plastic profile reinforced around the perimeter, which increases its reliability.
By installing armored anti-vandal glass, you protect yourself from the actions of hooligans and burglars. Multilayer fabrics made using triplex technology can become an alternative to an armored product. They are able to withstand a blow from a stone or a bottle, and even when broken they will not scatter, but simply become covered with cracks.

A door structure with a double-glazed window can be made special by laminating, complicating the layout, tinting, applying a mirror or matte finish.

What to look for when choosing a metal door

When choosing a door, you should make sure that it is resistant to forceful and intellectual break-ins. The design must guarantee reliable protection property and people's lives.

Another aspect that should also be evaluated is the ability of the canvas to sound and heat insulation. The door should block the entry of street noise, dust, drafts and odors.

Equally important are the strength and quality of execution of all mechanisms of the structure - hinges, handles, locking system. You should make sure that all elements work correctly in order to exclude unexpected jamming of locks and warping of the door.

Aesthetic appeal and compliance with style and color solution interior is no less a weighty argument in the arrangement of the entrance group.

Security class

There are 13 levels of burglary resistance of doors. The security class for household products usually varies within the first four positions. Higher protection categories are required for banking equipment and vaults.

Let us analyze the properties of doors corresponding to the first four levels.

1. First class - physical strength and ordinary hand tools are enough to open the door.
2. The second class - for hacking you will need a special power tool.
3. Third class - such an obstacle can only be overcome electrical devices with power exceeding 500 watts.
4. The fourth class is bulletproof doors that are resistant to previous breaking methods.

Steel thickness

The reliability of the structure directly depends on the thickness of the steel from which the canvas is made. Most often, metal with a thickness of 1-2 mm is used. In better and more expensive doors, the thickness of steel plates can reach up to 6 mm.

It is not recommended to use steel thinner than 1 mm, since it is unstable to accidental mechanical damage and vandal attacks. Optimal material for the manufacture of canvas for the entrance group in an apartment or a private house, steel plates with a thickness of 1.5 mm are considered. They do not weigh down the door beyond measure and at the same time guarantee it a high level of protection. For even greater reliability, manufacturers reinforce the canvas with an additional sheet of steel.

Number of stiffeners

The design of the metal front door is a multi-layer cake. The outer layers are steel plates, which are reinforced from the inside with stiffeners. IN quality doors there must be at least three such elements - one horizontal and a pair of vertical ones. But the more stiffeners in the design, the more durable, heavy and reliable the door leaf will be.

Heat and sound insulation

The filling of the door "pie" consists of heat-insulating and sound-proofing materials and differs depending on the price category of the product. Cheap samples are filled with corrugated cardboard or mineral wool in the form of pressed boards. More expensive models are insulated with polyurethane foam, which blocks noise and does not allow the room to freeze.

The thermal insulation characteristics of this material are very significant. No wonder he is so popular. Judge for yourself - a 10 mm thick polyurethane foam sheet has the same thermal insulation ability as brickwork with a thickness of 30 cm.

Number and types of loops

Because the loops are weak point any, even the most reliable door, it is better that they are hidden. Such fittings will not leave a chance even to the most sophisticated intruder.

Manufacturers are constantly working to improve the sustainability and quality of these devices and offer unique, patented concealed hinge designs.

The most reliable designs are obtained if, instead of hinges, the door is equipped with special anti-removable pins. Thick steel rods are installed on the end side of the web in the place where the loops are usually located. When the door is closed, the pins go into the holes formed in the door frame. The rods are blocked, so that the possibility of removing the web is completely excluded. There can be at least 2 such parts, however, for greater reliability and structural stability, it is recommended to install at least 5 pieces.

Exterior and interior decoration

Products are various variations deaf canvases. They can be performed with decorative design in the form of an imitation of a paneled door, to have fragmentary glazing. The outer side is usually decorated in dark restrained colors. It can be plain or imitate the texture of natural wood or stone. From the living quarters, the product is decorated with MDF sheets, finished with natural veneer, laminated or plastic lamellas.

Features of choosing a lock

The degree of reliability of the door depends not only on the thickness of the steel and hidden hanging fittings. A cheap simple lock can nullify the merits of any quality design. A specialist will open such a lock in a couple of seconds. It is advisable to equip the product with not one, but several different types of devices. At least there should be two. The main lock secures the door in several directions with the help of bolts. Additional fixation devices may be simpler. The main thing is that they are not cheap - such locks often jam, break, they are easy to open.

In order to increase the reliability of the lock, you can install special armor plates.
The most reliable is the "brainchild" innovative technologies- biometric lock. For authentication, such a device only needs to read information from the fingertips or the iris of the eye. Such devices are capable of storing up to 99 different fingerprints. They are successfully used in "smart home" systems and nullify the efforts of masters of intelligent hacking. The owner of the house can manage it at will - to open or restrict access to other persons. In case of an emergency, such a shutter can be opened using a special cylindrical key.

Additional protection systems

Devices that impede access to the locking mechanism provide additional protection for the door. Among them are:

Armor plates - protect the pocket area for mounting the lock. They do not allow drilling at the fixing points of the lock case and shank. The armor plate is made of steel 3 mm thick and is welded into the door at the manufacturing stage. In total, the thickness of the outer steel sheet of the door leaf, the mounting pocket and the protective lining is as much as 7 mm, which suggests a high degree of security of the locking mechanism.

Armor plates - protect cylinder locks. Exist various options overlays like this:

• invoices consist of two elements and are installed on both sides of the door leaf, after which they are connected with pins;
• mortise - installed on the cylinder by cutting through the metal sheathing and mounting pocket;
• magnetic - among them are sliding and rotary. Sliding block the keyhole. You can remove them only by attaching a special magnetic key. Swivel - almost the same principle, only the protective cover does not move, but rotates;
• coded - a metal curtain closes access to the locking mechanism. During the first stage, access to the introduction of the key into the lock opens, the next step is to open the locking mechanism.

peephole

Good fittings are very important for high-quality protection. And it's not only hinges, a lock and a variety of overlays. modern door must be equipped with a panoramic peephole with a wide angle of view. The device may be periscope. In such a product, the eyepiece and lens are located at different levels. There are bulletproof eyes that will protect against the attack of an armed robber. The most convenient are electronic systems that, like a video intercom, have a display and have the ability to record sound and images.

To install a reliable door leaf, a strong burglar-resistant box is required. This is a special design, which is far from being as simple as it seems. Manufacturers are constantly developing new options for boxes, which makes it possible to make the entrance to the home more and more impregnable. There are double adjustable designs that allow the door in the closed state to practically “merge” with the wall, to be in the same position with it. This technology requires the use of special "invisible" loops. Hidden mechanisms have a built-in latch that limits the opening angle. This device works automatically. The locking mechanism is also adjustable. He independently determines the desired degree of pressing the door to the box. This ensures optimum contact and effective blocking of noise, dust, odours, cold and drafts.

The dimensions of the door depend on the size of the opening, the door frame, the number of leaves and the established state standards.

The dimensions of the structures vary depending on the number of wings. There are single-leaf, double-leaf options, as well as supplemented with a transom.

A single leaf door is a single leaf mounted in a box. It is not recommended to install doors with a width of more than 110 cm. It will help to make an unassuming option stylish and modern. original design and correction of the opening in the framework of GOST.

A double-leaf composition is a popular version of a door in a private house. The opening for it should be twice the standard dimensions. The height remains the same. It looks very respectable, but requires much more space. As a compromise, you can choose one-and-a-half doors with different-sized doors. The narrow part remains motionless most of the time and opens only when necessary.

A door with a transom is useful if the height of the opening is increased. This technique allows you to use canvases of standard height, and close the upper part with a special insert.
GOST defines the standard dimensions of doors, regardless of their design features.

The main parameters indicated by GOST:

• The height of a standard doorway can vary from 2070 -2370 mm. The exact value of this indicator depends on the ratio of height to the distance from floor to ceiling, and the width of the door.
• The minimum width of the door clearance for the entrance group is 900-910 mm. The maximum value for single leaf doors can be 1010 mm. The same indicator for a one-and-a-half door is set in three sizes - 1310, 1510 and 1550 mm. The recommended width of double-leaf structures is 1910 or 1950 mm.

There are no specific guidelines for the thickness of door products. It depends on the materials of manufacture, the design features of the door, its internal content. In addition, the thickness of the walls and the depth of the box are taken into account.

Standard solutions are good in typical apartments. Today, designers are constantly inventing previously unknown stylish solutions. In private construction, GOST recommendations are not always relevant. That is why the front door country house can be any, the most incredible sizes. The dimensions of the future canvas are determined on the spot by measurements. However, overextension of parameters is neither practical nor desirable. Therefore, doors with a width of more than two meters and a height of more than 2400 mm are not recommended to be installed in a private dwelling.

An exception can be made for a building that is used as a public institution or is significantly larger than standard buildings.

Color and style

The main thing to consider when going for new door- this is the style of your interior and the architectural features of the building. It is difficult to imagine a high-tech front door in a classic mansion. Or in Scandinavian interior baroque construction.

Appearance is one of the most important criteria that we are guided by when choosing a particular model. The product must correspond to the chosen direction of design, be combined in color with the exterior of the house, wall, floor and ceiling decoration, be in harmony with window frames, skirting boards, interior doors, furniture.

Options with imitation of a wood pattern can be safely called universal, as they are appropriate in almost any style. Finishes made in light colors, suitable for modern classics, minimalism, country, marine, Scandinavian, eco-style. Dark wood of noble shades will fit perfectly into the interiors of the Baroque or Rococo era. The effect of aged wood will emphasize the atmosphere of Provence.

Wood textures will not fit except in high-tech. Painted products with glass and chrome inserts will be appropriate here. Hi-tech doors can be white, black, blue, red, glossy or metallic.

In order for the doors to fit perfectly into the interior, it is enough that they match the color of the skirting boards, architraves or stairs. Platbands made in the same color with the furniture design will help to combine canvases with cabinets of a different shade.

Where should the front door open?

• In Russia, doors open outward more often, as this helps free up space inside the vestibule and use it more productively. But this is not important and the canvas may well swing open into the interior of the room, depending on the requirements of SNiP. The method of opening the door should not cause difficult evacuation of people from the building to the street in an emergency, therefore:
• the open door does not block the entrances to the rooms and neighboring apartments;
• the passage with a fully open sash should not be narrower than 1 m;
• doors located opposite each other in a narrow corridor should open inward so as not to interfere with each other's functioning at the same time.

If these rules are followed, the opening method is of no fundamental importance and its change does not require official approval. But if earlier the door opened in the other direction, it is worth warning neighbors and utilities about the changes.

About manufacturers of entrance doors - advantages and disadvantages

Earlier special choice it was not - wealthy citizens preferred products of European manufacturers, mainly Italian or German, while more thrifty ones put affordable Chinese options. Today, this niche is densely occupied by Russian companies. The lion's share of steel doors on the domestic market is produced in Russia - 90% of the entire range offered. The latest European components and technologies are used in production. Among domestic representatives of this area such large enterprises as ESTA, Guardian, Bastion, Toreks, STAL, Bars are in the lead. In addition, there are many small businesses offering decent quality products. True, their collections are not so diverse.

10% of the market is shared by large Chinese manufacturers, as well as companies from Italy, England, Poland, Israel and Germany.

How to place an order for a door in a store

When ordering a door, you need to focus on the size of the entrance opening. The box should fit into it without any problems. It is better if there is a little space left, which will allow you to set the structure strictly in an upright position and fix it with mounting foam.

Warranty service

You need to make sure you have a warranty. It gives the opportunity to claim free of charge the elimination of defects found during unpacking, acceptance and installation of the product.

The duration of the warranty for the door leaf, lock and fittings may be different. Find out this point in advance so that there are no surprises.

Warranty obligations remain valid if you have followed the rules of operation:

• lubricate the hinges at least once every six months special composition- you can use grease;
• insert the key into the hole to the end and gently turn it;
• the key was removed from the lock mechanism only after a full 360-degree turn;
• do not use corrosive and abrasive substances for washing;
• provided protection door block from moisture and direct sunlight;
• did not repair the door on their own and did not make changes to its design that affected the characteristics of the product;

Conclusion

Entrance doors have always been the face of a home. They provided protection to its owners, allowed to create comfortable living conditions. Today, the basic functions remain the same, but the use of modern technologies allows you to endow the input structures with new possibilities.