How can I clean interior doors from stains. How and with what to wash the front iron door. Cleaning chipboard doors

Every housewife, while cleaning the house, strives to achieve perfect cleanliness. But greasy stains do not give up, especially trying to stain the entrance and interior doors. And to what extent do not bring gloss, if the handles and bottom are smeared with dirt, then the result of cleaning will be low.

What you need to know before cleaning

When starting to clean interior doors, you need to consider some points:

• Do not start washing door covering without testing the selected cleaning agent. To do this, use an inconspicuous area. If there are no negative consequences, then you can proceed to a full washing of the surface.
• Do not use various hard brushes, metal washcloths and scrapers. They will certainly lead to the fact that the integrity of the coating will be violated. After removing the stain, it will be necessary to repaint or change the entire door.
• Do not use the following strong cleaners when cleaning: 96% alcohol, pure, undiluted acetone, acids and solvents.
• Do not leave the cleaning agent, like water, for a long time on the surface to be cleaned in order to avoid unpleasant consequences in the form of bloating or brightening the area.

Methods for cleaning doors made of various materials

Before proceeding with the removal of grease stains from the surface of interior doors, it is necessary to clarify what material they are made of. This depends on how you clean it.

Chipboard and MDF (checked by the editors)

Method 1: Citric acid or vinegar cleans chipboard and MDF surfaces well. Prepare a solution of 2 tbsp. l. lemons (or table vinegar) in a glass of water and use a soft sponge or cotton pad to clean problem areas.

Method 2: make a soda solution (200 ml of water take 3 tablespoons of the product). Pollution is washed with a soft sponge dipped in it, and then wiped dry with a clean cloth.

Method 3: Prepare a solution of water and dishwashing gel and lather well. This foam is applied to greasy blots and left for 5 minutes. After that, the remaining dirt is washed off with water and wiped with a dry cloth. This method is suitable even for white products.

Be sure to polish the surface with a soft flannel after cleaning by any of the above methods.

Edited by: there are greasy old stains on the MDF doors. Previously, an alcohol-based glass and surface cleaner was used for cleaning. Cleansing result - 10 out of 100.

Tested on one of the doors citric acid solution. The photo shows 100% stain removal from the door. But it didn't come easily. The procedure had to be repeated several times with pressure. Washing the whole door in this way is very difficult, long and troublesome.

result after cleaning stains with a solution of citric acid

The next test is cleaning soda solution . Stains from the doors are washed quickly, without any effort. After cleaning, wash off the whitish stains. The only drawback is that drops fall on the floor, which will need to be washed immediately. And this may not be part of the plans of those who are used to general cleaning do partially. Which is even correct, so it’s worth laying something.

result of cleaning with soda solution

See also: on interior doors.

Laminated

The surface of such doors is a particularly strong laminating film, with the exception of paper, which greatly simplifies the task of washing grease stains.

1. The first method requires alcohol. Dilute it at the rate of 9 parts water to 1 part alcohol. Place a cloth soaked in the solution on the stain for 5 minutes. After that, dry the door.
2. Washes the laminated surface very well with 72% laundry soap. To do this, grate it on a coarse grater and prepare a thick soapy solution from it. To prevent the material from absorbing water, the procedure must be done as quickly as possible. The stain is wiped with a foam sponge, and then the moisture is removed with a paper towel to dry.

Do not use abrasive products and chemically active reagents (acids, alkalis) to clean laminated products.

If, nevertheless, the stain could not be removed, you can purchase a special masking pencil to match the tone at the hardware store.

wooden surfaces

Dirt can be removed from a wooden door with talcum powder. Pour a little powder on a sponge and rub the grease stain. Remove the remaining traces with a damp cloth, and then wipe everything dry.

Raw potatoes will also help to wash the wooden interior door from greasy traces. It is necessary to cut the potato and rub the problem area with a slice. Then remove the residue with a damp cloth and wipe dry.

For the next method, prepare a mixture of 3 tbsp. l. white clay and 2 tbsp. l. vinegar, and then cover the dirt with a small brush. After waiting for everything to dry, it is necessary to remove the remnants with a damp sponge.

Painted doors can be cleaned with 9% vinegar. Soak the stain with a cotton swab dipped in it, and then remove the dirt with a damp cloth.

glass

To remove stains from such doors, you can use a regular glass cleaner, or prepare an alcohol solution at the rate of 1 tbsp. l. per 1 liter of water (can be replaced ammonia in the same proportion). Having washed the glass surface with such a solution, it is necessary to rub it with crumpled newspapers.

Veneer

These are thin sheets of wood used to cover door products or furniture. For veneered surfaces, it is best to use a polish containing wax. A raw potato will help to clean off old greasy stains, as in the method of cleaning wooden door products.

If you get rid of greasy stains in a timely manner and wash interior doors at least once a month, then you can keep their original appearance.

Door cleaning- the ability to maintain an attractive appearance and integrity of the coating for a long time. At the same time, care should be regular and correct. Doors, like any other household items, need cleaning. For this purpose, suitable cleaning agents are specially selected depending on the material of the door surface, its color and some other parameters. Let's figure out how to properly care for the interior and front door.

• before washing, adjust the doors;
• lubricate the locks and hinges with a special tool;
• make sure that the room has a humidity of up to 65% and a temperature of up to 24 degrees;
• remove any fresh stains from the door surface as quickly as possible, without delay;
• cover door structure varnish, especially if it is a low-quality canvas;
• close the doors with foil if repairs are planned;
• in general, you need to use the door very carefully so that you do not have to try to repair serious dents or deep scratches.

Choose the right cleaning agent. In particular, veneer and natural wood are cleaned in completely different ways. If this is not taken into account, there is a possibility of hopelessly spoiling the door covering. In addition, it is recommended to consider such tricks:

• cool water with a few drops of ammonia, wash the glass in the decorative rates in the door;
• use a soapy solution to wash metal door elements;
• wipe the doors only with soft cloths;
• get special microfiber cloths for cleaning doors;
• once every 3-4 days, wipe the decor elements, handles and inserts of the structure from dust;
• use a disinfectant (a weak solution is sufficient).

The main reasons leading to the fact that the door covering loses its aesthetics are insufficient or improper care, careless handling of the door.

Important! Sprays, aerosols and products specially designed for this are excellent for cleaning the door. They are applied to the door covering through a spray bottle, allowing you to wash off any dirt.

The fight against fat

Fighting grease on wooden doors is a must, especially if they are located in the kitchen opening. Easiest to use folk remedies that are effective and safe to use. You can give preference to the following methods:

1. Use a solution of water and surfactant or dishwashing detergent if stains need to be removed. The method is effective for wooden and MDF doors.
2. Use a raw potato slice if you need to quickly get rid of greasy drips or stains. In conclusion, the area is wiped with a slightly damp cloth.
3. Mix clay and vinegar in equal proportions. You should get a mixture that resembles gruel. It is applied to the stain and wait for 20-30 minutes. After that, it remains just to wash it off. This method effectively fights stains of any type, including greasy marks. For the most serious contamination, you can repeat the cleaning procedure 2-3 times. The method is suitable for cleaning unpainted wooden doors.
4. Sprinkle talc on a napkin and press it against the stain on the door for 5-10 minutes (you can use tape). After this time, brush off the talcum powder from the surface of the door and wipe the surface with a dry cloth.

To restore the glossy shine of the surface, you need to wash the door with a solution of water and vinegar (1 tablespoon of the product per liter of water is enough).

Remember that all solutions must be washed off the door surface with cool water. Finally door leaf wiped dry thoroughly. The use of metal brushes, hard sponges and products containing abrasive substances is unacceptable.

It is important! By the way, getting rid of dust is very simple. To do this, it is enough to wipe the door leaf with a dry and damp (but not wet) cloth. In conclusion, it needs to be polished using a door polish.

glass cleaning

Glass cleaning is not the best simple task. It always seems that you can easily wipe the glass insert on the door, and it will shine with cleanliness. In fact, there are always divorces, which are a real problem to eliminate.

1. Onion juice or soapy water will help remove greasy stains.
2. The matte surface can be washed with a starch solution (you need to add 20 grams of starch to 500 ml of water).
3. Alcohol, thinner, acetone, and even nail polish remover can quickly get rid of traces of glue, coffee, and tea. However, you need to act carefully so that the funds do not come into contact with the box, rubber seals, and also the skin of the hands.

It is not necessary to use alkalis, acids, gasoline and concentrated ammonia to clean frosted glass. Scraping dirt with a knife or scraper is taboo.

It is important! First you need to clean the glass inserts of the interior door, and then the door leaf.

Tips for caring for an iron front door will help keep it clean:

• cloth soaked in hot water, get rid of traces of adhesive tape;
• acetone-containing liquids will help get rid of old tape residues;
• white spirit or other solvent will help remove traces of paint;
• sandpaper will help get rid of traces of lime and whitewash (you can not use this method to clean iron doors with vinyl or leather coating);
• a solution of vinegar will help to cope with stains and traces of whitewash;
• a solution of water and kerosene will help remove plaque;
• products that contain acetone or alcohol will help get rid of polyurethane foam which has not yet hardened.

How to clean plastic?

How to clean plastic? It's very simple. It is enough to use soapy water. You can give preference to the other compositions listed above, but in most cases there is no need for this, since all contaminants are easily wiped off.

You can also use vinegar solution, liquid laundry detergent, soda. Special sprays and cleaners for plastic surfaces are effective for cleaning.

It is important to consider that plastic cannot be rubbed, washed with metal sponges, rubbed with a brush. This leads to its damage, the appearance of microcracks, into which dirt is subsequently clogged.

What about defects?

Defects that may appear on the door during use can also be dealt with. In particular, it is recommended to listen to the following tips:

1. Use sprays containing beeswax and polish to get rid of small cracks and other barely noticeable defects.
2. Use a special wax pencil suitable colors to repair deep scratches. It is enough to rub the damaged area to fill the void of the crack.

Caring for doors is a feasible task for everyone. The procedure is not complicated and does not require serious economic costs. Regular care is an opportunity to extend the life of the door surface, take care of its aesthetics.

Professionals advise how to wash wooden doors on your own, and what means are best used for this. Modern doors are often embossed, they are decorated with decorative slats and mosaic patterns.

Door handles become untidy in a short time after cleaning and also need separate detergents. Therefore, it is better to learn the rules for washing doors from various materials.

Basic rules for caring for doors

In order for the doors to serve as long as possible, the owners should:

• take into account that the tree does not like humidity over 65% and temperatures over 24 degrees;
• take care of the doors to prevent damage;
• various stains are removed from the doors immediately;
• if the door leaf is not of high quality, it should be varnished in two layers - then the problem is how to wash MDF doors will not be.
• for a while repair work, the doors are covered with polyethylene.

The choice of detergents for doors

For washing the door are used:

• neutral detergents;
• the glass in the doors is wiped with water and ammonia and wiped dry;
• metal inserts are washed with soapy water;
• door handles disinfect.

Common cleansers include Mister Muscle and a spray bottle. They wipe the doors and remove greasy stains from the glass.

door cleaning

The tree cannot be wiped with a wet cloth, so it must be wrung out before washing. To remove stains on the door, apply:

• dishwashing liquid is used for the door leaf;
• grease stains are eliminated by wiping them with a slice of potato;
• stains are covered with a mixture of clay and vinegar in equal proportions, kept for 30 minutes and washed off with water;
• to add shine to glossy glass, apple cider vinegar is added to the water;
• first the glass is washed, and then the door;
• smooth glasses are washed with a soft cloth, embossed ones with a brush, and for frosted glasses, starch is added to the water.

The problem of how to wash white doors is especially present, because pollution is more noticeable on them. The main thing is to apply a detergent to soften the dirt, and after a while wash off the dirt with water and wipe the doors dry.

Elimination of surface defects

When it was not possible to avoid damage to the door, they are eliminated with a wax pencil that matches the color of the door. If the damage is deeper, you need to use wood putty, after which the doors should be painted or varnished.

All compounds are washed off with clean water, after which the doors are wiped dry. When washing do not use metal washcloths and abrasives, so as not to damage the surface of the doors.

Only with proper and systematic care will your doors be able to retain their original appearance for as long as possible. Of course, like any other furniture, and especially products from natural wood, the doors need careful treatment.

How can you clean wooden doors?

No matter how often you clean the house, no matter how clean you have, these interior doors still get dirty over time. A greasy coating appears on them, since there are always a lot of impurities in the air, dust settles. In any case, you see that it's time to wash the doors. What is the best way to do this?

Of course, there are many special cleaning products in stores, but you can probably do without them. At least it's worth trying. So, you will need ordinary clean water, if this is not enough, then make a weak soapy solution, or add alcohol to the water. Before wiping the door, the rag must be wrung out well.

If just water does not help you, then take a soapy solution. It does a great job with light dirt. If the stains are already quite noticeable on the door, then turn to the alcohol solution. This recommendation will be especially useful to those who have chosen such a solution, i.e. put doors in their house white color. Indeed, on such doors, any pollution will immediately be evident.

It must be remembered that in both the first and second cases, you initially take a soft rag, moisten it in a washing solution, wring it out, wash the door with it, and then carefully wipe it with a dry rag. The door should not sour and get wet. Do not wash the door with washing powder, as well as with any abrasive products. If the method described above did not help you, then it is better to purchase a beeswax polish in the store and clean the door with it. This tool works great for both lacquered and unvarnished wooden doors, while all the dirt simply dissolves and the surface is not damaged. But that's not all, such a polish is able to remove small scratches on a wooden surface. It creates a protective film on the surface, which in turn protects the wood from dust, grease, drying out, but also significantly improves the appearance and shine of the door. Yes, the polish is not the best cheap remedy, but nevertheless it will last you for a long time, and in terms of quality it is worth it.

Even if your door is outwardly clean and without damage, you still need to clean it at least once a year. This will help keep the door new for many, many more years, and it will bring joy and comfort to you. After all, the door is the same part of the interior, which affects the whole mood in the house, the whole appearance, and is largely able to show the character of the owners.

Keywords: How to clean a wooden door, Basic cleaning methods, How to clean wooden doors, interior doors, how to clean, alcohol, water, polish, soap solution, white doors, white doors, color

Carrying out general cleaning activities affects all aspects of life. We remove dust from all surfaces, wipe floors and wipe windows and household appliances. Among the standard procedures, no less important, but less commonly performed processes are easily lost.

Today we will talk about doors, or rather, what means to wash them and how to do it. We will give answers to the most popular questions in the field of high-quality care for the door leaf, glass and fittings.

Doors are an integral part of our home

Basic moments

Interroom doors no less than other items in the apartment accumulate dirt and dust. This is especially noticeable if the door leaf is not monolithic, but has various carved details, glass. Traces of dirty hands immediately appear on the bright doors, and the fittings are covered with a sticky layer of dirt mixed with dust.

Eco-veneer is especially vulnerable to pollution, because, by and large, it is just a textured film with which the canvas is pasted over. Eco-veneer film is produced in different countries, enough quality material obtained from Koreans, Japanese, Italians.

In order for the door to please us with its cleanliness and to be pleasant to touch, you will have to take care of it during operation. In addition, blind canvases are not so popular now, because the door is most often an integral attribute of the overall picture of the interior of the room, therefore it should be colorful and beautiful, and therefore clean.

Doors support the interior of the room

Let's highlight the main points in caring for doors:

• It is necessary to devote time not only to washing the door leaf itself, but also to cleaning and adjusting the fittings. If it is loose, it is necessary to tighten it, if it creaks, grease it.
• If you have doors made of natural wood or solid wood installed in your house, it is worth adjusting the microclimate in the room. It is undesirable to allow the temperature to rise above 25 ° C, and humidity more than 70%.
• Severe damage to quality doors it will not be possible to hide, there is no way to hide any scratches or dents, so try to take good care of the material.
• In case of contamination and staining, try to wash your interior doors immediately, it is better not to wait for the dirt to absorb into the structure of the material.
• Old doors of not the best quality, or modern eco-veneer, can be additionally protected from dirt by varnishing. Not the smartest way out, but accessible to everyone.
• During repairs, close the doors with polyethylene, like other pieces of furniture, so as not to get dirty.

Doors are made from different materials: pvc, laminated, eco-veneer, natural veneer, solid wood. For each material in ideal your detergent composition, or just clean water. To properly wash and clean the canvases, you can use the following tips:

When cleaning, pay attention to door fittings

• Many modern doors equipped with glasses, to wash them without smudges and streaks, add a couple of drops of ammonia to the water, provided that they are not dull.
• Metal parts on the doors are well washed with ordinary soapy water.
• In order not to spoil the door covering, it is best to wash and wipe the surface with a soft cloth, such as suede or microfiber.
• On decorative inserts and carved elements of doors, dust will certainly accumulate, so do not forget to remove it during the weekly cleaning of the house.
• Finishing washing the door leaf, pay attention to the fittings, wash and disinfect the handles.

Most often, the door fails, or loses its aesthetically attractive appearance through our fault, due to poor handling and lack of proper care. But we want the door to serve us faithfully for a long time, so we choose suitable remedy and we will wash it.

Detergents

Means for washing doors are selected taking into account the material from which it is made, the degree of contamination and the presence of decorative elements on the surface of the canvas.

Universal detergents sold in the form of a spray are very popular. They are very convenient to use, they do not have pronounced chemical odors and help to clean surfaces of different quality from stains and other contaminants: glass, wood, pvc, eco-veneer. You can purchase detergents for a specific type of door covering in the same stores that you bought your doors for.

White and light doors require more care

Wooden doors require more attention to themselves than canvases made of veneer or eco-veneer (3D films). They do not like huge amounts of moisture, so when wet cleaning, make sure that the rag is slightly damp. Wooden doors can be rinsed with normal water, without the use of detergents, but in most cases dry cleaning will be sufficient. To protect the fabric from dirt, use a polish.

Among the folk detergents with which our compatriots are trying to wash the doors, the following compositions can be distinguished:

• Dishwashing liquid does an excellent job of removing dirt from the surface of the veneer. Eco-veneer can also be wiped with a similar surfactant composition.
• Grease stains can be removed with a potato, for this a fresh potato is cut in half and the stain is rubbed with it. After removal, rinse the cleaned area with plain water and wipe dry with a cloth.
• For solid wood and natural veneer doors, not particularly fond of wet cleaning, housewives found good way removal of oily and dirty stains. Talc is poured onto the dirt, it absorbs dirt, after which it is washed with a dry cloth.
• To add shine to a veneer door, clean water used for washing can be added apple cider vinegar. Approximate proportion: 1 tablespoon per liter of water. Some types of eco-veneer can also be processed with such a composition.

Don't forget to remove after washing. detergent from the door with clean water, and then wipe the canvas dry. Do not use abrasive cleaning tools and compositions: brushes with iron bristles, washcloths, washing powders, with this tool you will definitely spoil the decorative surface.

Glass work

If frosted or ordinary glass is inserted into the door, it is worth starting to wash the door from it, and only then go directly to the canvas. Smooth glasses are washed with ordinary soft cloths with a minimum amount of lint, frosted glass can be rubbed with a soft-bristled brush.

Frosted glass is produced by sandblasting. With the help of sand, the top layer is knocked off a smooth surface, from which the glass takes on a cloudy appearance with a frosty effect. Frosted glass allows you to hide what is happening behind the door from a distance of 30-40 centimeters.

Frosted glass is perfectly washed from greasy stains and fingerprints, using dishwashing liquid or starch solution. To prepare a solution, warm water starch is added, 3-4 teaspoons per 1 liter.

If desired, you can install all-glass doors in the house.

Complex, stubborn dirt is removed with alcohol, acetone, nail polish remover based on it. Frosted glass does not lose its decorative qualities. However, when working, make sure that solvent drops do not fall on the rubber elements of the box seal or silicone filler next to the glass.

Solvents, gasoline, ammonia do not need to process frosted glass. You also do not need to scrape them with sharp objects, for example, to chip off traces of silicone.

If there are some defects on the door, they can be masked with a polish. If cracks and scratches are stronger, then they will help to hide them. Choose the right shade for your door, and rub the pencil into the surface of the canvas, let the wax fill in its flaws.

While maintaining proper cleanliness in the apartment, you will have to take care of your doors one way or another. Make sure that they always look clean and tidy, because there is nothing complicated about it.