How to update an old door with your own hands. How to update a door: original ideas. Original ideas for decorating doors

A modern interior door is not only sound and heat insulation of the room. This is a full-fledged element of the interior that plays an important decorative value. Probably, this is what the manufacturers are guided by. building materialssetting prices on doors. No, not that they are too high, but not at all low. But you really want all the details in the interior to match each other. For those who do not own unnecessary material resources, but have good taste, imagination and a great desire to decorate their life, we will tell you how to finish interior doors with your own hands. Please note that, most likely, in addition to the doors themselves, your attention will also be required door slopes, and, of course, the doorway.

Preparation of interior doors for finishing

Regardless of which finishing method you like, the surface door leaf need to prepare. In the process of work, you will need: high-quality glue, tracing paper and any item used as a press. First of all, the door leaf must be removed from its hinges and carefully checked for lagging spots, cracks and voids. The exfoliated areas of the surface must be carefully and carefully covered with glue, covered with tracing paper on top and pressed down with a press. Small voids and cracks are also excellently removed with adhesive. If there are deep cracks, you will have to tinker a little longer. They are usually filled with fine sawdust mixed with furniture varnish or construction glue.

Methods for finishing interior doors

The simplest ways to decorate interior doors are:

painting;
opening with varnish;
staining;
veneering;
decoupage;
craquelure.

Door painting

Decorating interior doors by applying paint on it is the most commonly used way to update a door leaf. The work uses aqueous solutions of organic or synthetic dyes. The result of this coating is an updated, brighter appearance of the door. The solution must be selected based on the original color of the wood.

Opening with varnish

For door varnishing, handymen prefer parquet varnish or Polish Lakobeyts. Both options flow well and penetrate deep into the wood. Lakobeyts has an additional plus - this composition combines both varnish and tinting base. The coating can be applied with a brush, roller or spray. However, experts recommend the first option, arguing that when the brush moves parallel to the door fibers or structure, the varnish is applied more evenly. To obtain a more aesthetic result, the door leaf is opened twice.

Staining

Quite often, when finishing the same door leaf, at the beginning it is treated with a stain, and then varnished. Staining allows you to achieve the desired shade of the door, while varnishing enhances the brightness of the texture. Subsequent sanding gives the canvas a matte finish. If for some reason the matte surface does not suit you, then after grinding it is necessary to polish and dry. As a result, the interior door acquires a mirror shine and practically does not differ from those exhibited on the counters.

With veneering, old doors made from shavings, sawdust or low-value wood can take on new life and look like an expensive, elegant, high-quality product. The main requirement is a thorough preparation of the web, namely: sanding. The veneer is directly glued across the grain or diagonally.

Vinyl Sticker Decal

If you do not consider yourself to be a jack of all trades, choose the simplest and cheapest option for decorating an interior door, vinyl stickers. This method is especially good when you just need to hide a scratch or minor damage to the door leaf. Armed with a soft washcloth, hairdryer, and office scissors, you can update your door in minutes. Treat the surface before applying vinyl. There should be no dirt or grease.

Next, you should carefully align the sticker and separate the pattern from the backing on which it is attached. The image itself is glued like wallpaper, which is carefully smoothed with a napkin in order to avoid the formation of bubbles. 10-15 minutes after the vinyl has occupied the area of \u200b\u200bthe door assigned to it, carefully, slowly, so as not to damage the drawing, remove the mounting film covering the sticker. If the film does not remove well, slightly warm it up with a hairdryer. With a hair dryer, annoying vinyl stickers can be easily removed from any surface.

Decoupage of interior doors

The technique of decoupage interior doors is not much more complicated. The diligent hostesses will be able to make such a finish on their own, since the door leaf can not even be removed from the hinges.

In this case, door preparation is standard - washing and drying. Further, in order not to stain the adjacent space, you can stick adhesive tape around the perimeter of the opening. The door leaf is carefully primed, rubbed with the usual paraffin candles and is colored. Now we turn to gluing decoupage cards, which must first be held in cool water for 5-10 minutes. Before gluing, the remaining water must be removed with a napkin, then carefully apply PVA glue as on inner surface picture, and on the door itself.

After the card takes its place on the door leaf, you need to carefully check the result for wrinkles and bubbles, since then such flaws cannot be corrected. When the drawing is completely dry, its edges are processed with the thinnest layer of white putty, the excess of which is carefully removed with sandpaper. On the edges of the canvas and platbands, you can make artificial light scuffs so that the door looks retro.

The second, more economical option is to decorate the door with elements cut from napkins. They are selected to match the room, glue is applied to the door and the same is done with the fragment. Napkins are glued to the doors, smoothed, allowed to dry, and then the door is covered with acrylic varnish.

Craquelure

A similar finish for interior doors - original versionideal for antique lovers. Considering that such finishes are rare, your interior will be more than original. Craquelure technique involves the application of two layers of varnish. In this case, varnishing compositions need to be selected different in consistency and drying time. The surface of the door leaf for craquelure is prepared in the same way as when decoupage or gluing vinyl stickers, i.e. cleaned and degreased.

Craquelure varnish is applied first. After the first layer has completely dried, a specially aging varnish containing bitumen goes on top of it. Bitumen is used to enhance the effect and highlight cracks on a light base more clearly. For dark surfaces, use acrylic paint. The technology described above is considered the best.

In order to simplify the process, you can use a one-component craquelure varnish, which is covered with a contrasting paint on top. And for those who prefer cheaper options, instead of craquelure varnish, you can use PVA glue, vinegar, gelatin and even egg white.

Door leaf decoration

You can change the look of the old interior design in other ways, not related to the use of paints.

Photo wallpaper - special wallpaper for doors, installation instructions are attached to the product. Disadvantage - only exist standard sizes, and can only be used on a flat door leaf without panels.

Vinyl or paper wallpaper - can be glued both on the entire surface of the canvas, and only on the panels. If a door structure bivalve, it is recommended to choose a symmetrical pattern.

Fabric - glued as an applique, on a panel, or in fragments, imitating a patchwork. Care should be taken to ensure that the glue does not stain the surface of the fabric when it dries.

Interior door opening finishing

How to give new life to an old interior door, we have already figured out. But, you must admit, the openings also need to be put in order, otherwise updated, beautiful door will just look out of place.

Sections of the article:

A door is an interior detail that constantly experiences high loads. Naturally, after a while, the former aesthetic appearance the door leaf is lost. Various defects appear on the surface - scratches, cracks in the paintwork, dents, marks from dog teeth and claws. And if buying new doors is not an option, you should start restoring old doors. What this process is, what tools and materials are needed - we will tell you in our article.

The restoration process is quite complicated, but quite feasible. There is a mass simple options restoration of interior doors.

Required materials and tools

Depending on what type of door has become unusable, a certain set of materials and tools should be prepared for restoration work. So, you definitely need antiseptic impregnation, varnishes and stains, liquids for removing paintwork, paint for wood, putty and primer.

This is with regard to materials. Now let's see what is needed from the tool. This is an electric drill, a set of spatulas, chisels and screwdrivers, a carpenter's knife, roller, brushes, emery cloth, nails and a hammer, pliers, glazing beads, door hardware and a hair dryer.

Restoring a wooden door

Solid wood door leaves natural wood worthy of praise - they are reliable, environmentally friendly products that have a very aesthetic appearance. But such structures are very cumbersome - it is very difficult to restore them. However, subject to the technology of restoration work, the result is worth the effort. Natural wood lends itself well to restoration.

Training

The old door must be removed and laid horizontally on the most flat surface. If there is upholstery and glass inserts on the canvas, they should also be dismantled. Next, you need to move on to removing the paintwork - usually there are several layers of paint on such canvases. To remove the paint easily and quickly, you need a building hair dryer - the coating is heated until it is swollen, and then easily removed with a spatula. Remaining paint can be removed by sanding.

It is important not to overheat the door leaf during the heating process. As a result of overheating, wood can change its natural color. It is best to remove paint outdoors or in a ventilated room.

At the final stage preparatory work the entire canvas must be coated with a primer.

The main stage of restoration work

The first step is to carefully inspect the canvas - it often happens that after the preparation process there are some minor flaws. To eliminate them, you can use a putty. Based on the state of the door leaf, it is processed partially in places of defects or completely. Then, after the putty has dried, it is sanded. Grinding is a fairly delicate process, it should be treated with great care. The surface is well sanded only when there are no traces of processing on it.

Dust and dirt may remain on the blade after sanding. Before painting the product, the surface is thoroughly cleaned. It is desirable to apply paint in two steps - at the first stage, the canvas is covered with enamels, then proceed directly to painting.

The first step is to select the color of the future door - it is recommended to use stains. They can be both water-based and oil-based. Stain or enamel should be applied through a spray gun, but at home you can use brushes and sponges. It is not worth leaving clots of stains and enamels on the surface - this can affect the color of the entire door leaf.

The paint or varnish is applied with a short-pile roller or with a brush. If it is a brush, then it should be of high quality and better if it is made of artificial material.

Last step

At this stage, it remains to install the door leaf in its rightful place. But the process is not limited not only to hanging the door leaf on the hinges with subsequent alignment. Sometimes the door frame is reinforced with reinforcement rods or anchor bolts. These manipulations are performed with the door closed. After installation, the gaps between the box and the opening are filled with polyurethane foam.

Restoration process of lacquered door leaves

Let's take a look at how you can restore an old lacquered door. The first step is to remove the old coating. The door is carefully sanded and then sanded in the direction of the grain of the wood.

It is better to apply new varnish with a flute brush or a foam tampon. The varnish is applied in at least four layers with interruptions. The second layer can be applied in 2-3 hours, but all the rest - in a day. All this time, the room should be very well ventilated.

The resulting surface is then necessarily polished - since this process is quite laborious, it is recommended to use a grinder with a felt or felt polishing nozzle.

We restore veneered doors

The first step is to measure the surface of the door leaf and cut the prepared veneer. Then glue is applied to the canvas and allowed to absorb for 10 minutes.

If the door is not even, then it must be leveled - for large irregularities, use a plane, for small ones, you can do with an emery sheet. If there are chips or cracks on the surface, they are repaired with a putty.

For gluing the veneer, an iron is used, the heating temperature of which is no higher than 50 degrees. After the veneer is warmed up, the surface is fixed by lapping. Then it is necessary to press down the structure with a heavy object. It is important to carefully control the gluing process so that voids do not form under the veneer.

Laminate can be glued in the same way, but liquid nails should be used to fix it.

This method of restoring an old door has the following advantages - a wide choice of veneers, a long service life, and an acceptable cost. But such a coating is very sensitive to humidity and temperature changes.

Restoration of solid wood doors using MDF panels

The restoration process is very, very simple. MDF panels suitable for the style of the interior are glued to the old door leaf. This is a popular method and it also has some advantages - for example, these panels look very aesthetically pleasing, they are resistant to moisture and mechanical damage. Among the disadvantages - the panels are worn out in those places where they are frequently exposed to.

Restoration of doors from fiberboard

The technology for restoring such door panels is slightly different from working with door panels made of solid natural wood. These differences are not very significant, but you should still know them.

Some sources indicate that a blowtorch can be used to remove a layer of paint - no, it just should not be used. Only an iron or a hair dryer is allowed. For sanding work, it is allowed to use only fine sandpaper - the surface of the fiberboard is quite thin. You can slightly change the surface relief with the help of decorative elements - it will imitate a paneled canvas. Then, after sanding, the entire door structure is painted.

There is also another option. In this case, the surface will look like natural solid wood - for this, the surface is simply pasted over with veneer. How to restore in this way old door indicated above. After completing the work, the door will simply not be recognized - everyone will think that it is made of real natural materials.

There are also more complex methods, but for them you need to have certain skills. For example, a blind door can receive glass decorative elements. To do this, mark the place for future inserts, and then make a cutout using a jigsaw. The resulting space is reinforced with slats. How the inserts will look like, how many there will be - depends only on the imagination of the master and the style of the interior.

Door frame and fittings

These door elements also need restoration work as sharp as the door itself. In addition, the fittings should be replaced. Experts recommend completely replacing the hinges to match the color of the restored door leaf, handles and lock. It is recommended to purchase only high-quality products - the service life and ease of use of the doors depend on their quality.

Many DIYers believe that it is easy to purchase and install new box - but it is not. Doors that have been in use for a long time have some deflections in different directions. When changing the box, you can only increase the gaps - it will not look aesthetically pleasing.

As you can see, the restoration of old doors is possible. This is not a complicated process that you can do yourself. The materials that are required in the manufacturing process can be purchased in construction hypermarkets - often, their price is quite affordable. Such restoration allows significant savings - after all, even the simplest economy class interior door costs from 4000 rubles. In addition, old doors are quality products made from natural and solid wood, and after restoration they will look perfect.

The nuances of restoring an old door with your own hands. Ideas and methods, photo.

A person associates his home with a place of rest. Therefore, he tries to create coziness, choose an interior and a pleasant color rangeto fully implement this.

On the other hand, everything in our world tends to become outdated and destroyed. Our homes and their interiors are no exception.

Renewing something around us, we awaken in ourselves creative energies, we feel as creators.

Although most species internal works require special deep knowledge and skills for their implementation, update interior doors on our own we are quite capable.

Let's talk about the features and methods of reconstruction of old doors in more detail.

How to make a new one out of an old door with your own hands: options, photos, tips

photo of the old door before and after restoration using decoupage technique

It is important to prepare it before updating the old door:

remove the doors from the hinges and lay them on a flat horizontal surface
fold all fittings separately or prepare them for disposal if they become unusable
if there are glass elements, carefully remove the glazing beads and then remove the breakable parts
if the door was painted with paint, turn on a building hair dryer and gradually warm up its surface
arm yourself with a piece of coarse sandpaper and remove the bubbles old paint
replace the paper with another, with a finer abrasive and again walk over the entire surface of the door
final sanding with minimal abrasive paper
treat the door surface with a special putty for wood products
after complete drying, clean the doors in 3 approaches with sandpaper of different abrasiveness
fix the result with linseed oil or stain
then perform those types of work that are necessary to update the appearance of the door
if there were glass elements in it, put them first and then new glazing beads in a fresh color / design

For examples, look at the options for updated doors in the photo.

embodied ideas for decor and restoration of an old interior door, example 1

embodied ideas for decor and restoration of an old interior door, example 2

embodied ideas for decor and restoration of an old interior door, example 3

embodied ideas of decor and restoration of an old interior door, example 4

embodied ideas for decor and restoration of an old interior door, example 5

embodied ideas for decor and restoration of an old interior door, example 6

embodied ideas of decor and restoration of an old interior door, example 7

embodied ideas for decor and restoration of an old interior door, example 8

embodied ideas for decor and restoration of an old interior door, example 9

embodied ideas for decor and restoration of an old interior door, example 10

embodied ideas for decor and restoration of an old interior door, example 11

embodied ideas of decor and restoration of an old interior door, example 12

embodied ideas for decor and restoration of an old interior door, example 13

embodied ideas for decor and restoration of an old interior door, example 14

embodied ideas of decor and restoration of an old interior door, example 15

embodied ideas for decor and restoration of an old interior door, example 16

embodied ideas of decor and restoration of an old interior door, example 17

embodied ideas of decor and restoration of an old interior door, example 18

embodied ideas for decor and restoration of an old interior door, example 19

embodied ideas for decor and restoration of an old interior door, example 20

embodied ideas for decor and restoration of an old interior door, example 21

embodied ideas of decor and restoration of an old interior door, example 22

embodied ideas of decor and restoration of an old interior door, example 23

embodied ideas for decor and restoration of an old interior door, example 24

embodied ideas of decor and restoration of an old interior door, example 25

embodied ideas for decor and restoration of an old interior door, example 26

How and how can you update the color of old wooden doors: ideas

girl paints an old wooden interior door with white paint

After you have completed the restoration work on the surface of the old interior door, choose a new color for it.

Among the ways that can help you in this moment, we note:

Painting with stain, paint or autopsy wooden surface doors with varnish.
Remember, for the best result, brush along the fibers, then all the gaps will be filled with the dye.
Accents on moldings, or painting the protruding parts of the door with contrasting or similar colors. In the absence of such elements, glue them from wooden or polyurethane battens and paint.
Artistic painting, coloring through stencils.
The method is suitable for creative owners who want to bring originality to their interior.
Sticking wallpaper, large drawings on paper, pieces of fabric. Decoupage.
In this case, observe all the requirements for fixing the material on the surface of the door - soak with water, glue, treat from above with a stream of hot air.
Stained glass painting.
If you are good at drawing or have stocked up with interesting stencils, buy special stained glass paints and decorate the glass elements of your old door.
Gluing vinyl stickers.
Note that this method saves you time preparing the old door. In other words, you can not even remove it from the hinges, but immediately glue the vinyl elements.

How and with what can you renovate varnished doors?

man removes old varnish coating from doors for their restoration according to a new design

To carry out restoration work, remove the old varnish from the door in one or more of the following ways:

sandpaper
grinder
chemical solvent

The first method was discussed in the previous section. The second method will significantly speed up the process of removing the old varnish. And the third has one nuance - the varnish can remain selectively on the door leaf. Therefore, be sure to polish the latter.

After removing the old layer of varnish, sanding and drying the doors, decide on their new design, for example:

apply new varnish or laminate,
paint in desired color,
apply wallpaper / photo wallpaper or other imitation self-adhesive tape, for example, under a natural wood,
apply painting by hand, copying a specific drawing, or under a stencil,
decorate the door by gluing loose cereals - rice, buckwheat. Be sure to apply a layer of varnish on top for better fixation of the material.

How and how can veneer doors be updated?

photo of renovated old veneer doors

One of the most common problems with veneer doors is the swelling of the leaf in certain areas. Therefore, first prepare it, carry out restoration measures before updating.

To eliminate the problem of swelling of the canvas will help:

Iron.
Heat it on medium mode and iron the swollen surface of the door folded on a horizontal stand.
Wet rags.
Moisten a cloth rag with water and spread it over the problematic surface of the door. After a quarter of an hour, remove and wait until dry.
PVA glue.
Draw it into a syringe and carefully insert it under the swollen surface of the door. Smooth out the area with a dry cloth.

To eliminate cracks and chips on an old door from the material in question, stock up on strips of veneer of a similar color.

Cut out strips to match the surface to be repaired.
Cut off the excess with a scalpel after applying it to the chip / crack site. In doing so, keep in mind that the fibers of the patch should be located perpendicular to the restored door.
Treat the door leaf with a special putty and wait until it is completely dry.
Use double-sided tape to secure the veneer strips.
Sand the joints.

When your old door has only minor scratches and chips, wax them:

liquid
pencil

In the first case, drop a couple of drops into the break and immediately walk with a dry cloth to remove excess. Before doing this, be sure to clean the door from dust and dirt, and also sand the surface.

In the second - tear off a piece from the wax pencil, knead it in your palms and stick it on the problem area. Wipe off the mark with a rag. Do this only on a previously cleaned and prepared door.

The following will help you to update the prepared old veneer door:

paint

If you've covered up chips and scratches on your door with wax, remember that varnish and paint won't cover them. Or they will stay on it for a short time, and then crumble.

How and with what can you update paneled doors?

old paneled doors after paint renewal, options in decor

Paneled doors in the interior look interesting. However, it is not always convenient to handle their frayed surface. We will not go into details. Let's dwell on the restoration options.

Successful solutions:

painting with several colors with highlighting protruding places
gluing wallpaper in segments, adhesive tapes along the contour, on panels
decoupage of individual segments
varnishing

The cardinal method is to disassemble the door leaves and replace them with laminated hardboard. To do this, you sheathe the frame of the door with it and especially carefully select the color when gluing its ends.

If there is glass in the door, paint it with special paints or simulate a stained glass window. Stencils for decor are also suitable.

How and what can you renovate painted doors?

a man paints old previously painted interior doors

Your first task is to remove the old paint from the doors and prepare them for restoration work. Their sequence:

decide on the location of the door in space - either lay it on horizontal supports, or remove it from its hinges and leave it upright,
with a spatula, go over the entire surface and remove the layer of old paint,
sand with sanding paper,
treat with a special primer for wooden surfaces,
let dry and sand again,

Cover the areas of the door that you do not plan to paint or open with varnish.

How and how can you update paper doors?

updated paper doors in the interior

Renew paper doors with light materials that will not weigh them down and provoke breaks in the canvas. For instance:

self-adhesive film
decoupage
gluing individual elements, for example, paintings, volumetric drawings
painting with paints
stencils

How and how can you update an old door frame: ideas, photos

a man measures the level of a door frame in the process of its restoration

Remember about the restoration of the door frame when you are renovating an old door leaf. Of course, tinkering with the first one is less convenient, since it will not work to remove it.

The door frame processing technology is similar to those discussed above about doors. Carefully select the shades of paint and stain, as well as the color of the self-adhesive tape, wallpaper, so that this area on the wall is in harmony with the updated door leaf.

Below are a number of interesting door frames after DIY restoration.

updated door frames to match the interior and doors, example 1

self-adhesive door frame decor elements, example 2

self-adhesive door frame decor elements, example 3

How and how to glue the door beautifully?

beautifully pasted interior door after renovation

Among the common ways to decorate an old door is gluing a new coating in whole or in fragments.

For this, the following are suitable for you:

the cloth
leather and its substitutes
wallpaper
metal rivets, beads
patchwork
cut fragments of a picture, for example, a map of the world

To stick this or that material, choose an effective adhesive, for example, PVA glue, special for wallpaper, scotch tape, double-sided self-adhesive tape.

How beautiful to paste over a door with wallpaper?

old door after renovation is covered with wallpaper

The main thing is to follow the wallpaper gluing technology.

First, prepare the door leaf for the update. The technique was presented in the first section of the article.
Decide on the color and texture of the wallpaper.
Apply special wallpaper glue to the surface of the door and attach a piece of paper decor.
Smooth out the result with a dry cloth.
Cut off the protruding edges with a utility knife.
Wait until the wallpaper on the door is completely dry.

Complement the decor as desired:

molding
design features such as small seashells and cut netting glued on top and covered with paint

In addition to regular wallpapers, the following are popular:

wall murals depicting three-dimensional objects / paintings
decoupage
self-adhesive tapes

How to update an outdated metal front door?

old metal entrance door after update

Metal doors also tend to become morally and physically obsolete. Having set out to update them, keep in mind that the approach and methods will be different for the external and internal part of the front door.

So, the inner part will be updated with the following solutions:

stencil drawing
art painting
full door mirror
upholstery with dermantine
self-adhesive film
laminate

And for the outside of the door, they are suitable:

MDF panels
laminate

To secure any material to the surface of a metal door, you will need an adhesive liquid, such as liquid nails when working with wood flooring.

How to beautifully decorate an old door for a nursery yourself: ideas, photos

DIY renovated door in the children's room

Children's room is an area of \u200b\u200bcreativity, leisure and intellectual work of a child. Check with him before you start renovating the nursery door.

Better yet, involve the child in the process.

For inspiration, let's add a number of ready-made solutions for decorating the door to the children's room.

decor options for doors to the nursery after their update, example 1

options for decorating doors to the nursery after updating them, example 2

decor options for doors to the nursery after their update, example 3

options for the decor of doors to the nursery after updating them, example 4

decor options for doors to the nursery after their update, example 5

options for decorating doors to the nursery after updating them, example 6

options for decorating doors to the nursery after updating them, example 7

decor options for doors to the nursery after their update, example 8

decor options for doors to the nursery after their update, example 9

decor options for doors to the nursery after their update, example 10

options for decor of doors to the nursery after their update, example 11

decor options for doors to the nursery after their update, example 12

decor options for doors to the nursery after their update, example 13

How to beautifully decorate an old kitchen door yourself: ideas, photos

renovation of an old kitchen door with a mosaic

To transform the door to the kitchen after restoration, choose the concept of its decor. It can be:

painting
opening with varnish
decoupage
gluing wallpaper and any adhesive surfaces
art painting and stencils
stained glass elements on glass
mosaic and gluing loose, small elements

See below for the implemented ideas with updated kitchen doors.

embodied ideas for the restoration of an old kitchen door in the interior, option 1

embodied ideas for the restoration of an old kitchen door in the interior, option 2

embodied ideas for the restoration of an old kitchen door in the interior, option 3

embodied ideas for the restoration of an old kitchen door in the interior, option 4

embodied ideas for the restoration of an old kitchen door in the interior, option 5

embodied ideas for the restoration of an old kitchen door in the interior, option 6

embodied ideas for the restoration of an old kitchen door in the interior, option 7

How to beautifully decorate an old bathroom door yourself: ideas, photos

options for updated doors to the bathroom in the interior

The bathroom is a special place in any home. Here we bring beauty and rest after working days. I want the door to have its own style.

If you are currently updating it, check out these ideas:

drawing through a stencil
self-adhesive film
imitation of stained glass and paneled elements
combination of colors when painting fragments
mirrored interior
wallpaper

For more details, see the implemented ideas for decorating a bathroom door in the pictures below.

design options for doors to the bathroom after do-it-yourself renovation, example 1

design options for doors to the bathroom after do-it-yourself renovation, example 11

design options for doors to the bathroom after do-it-yourself renovation, example 12

So, we examined the features of the restoration of the old door in the house on our own. Got ideas from contemplating photos of ready-made ideas. We learned how to properly prepare the door surface for renovation.

If you feel potential but don't have the courage to swing at a large door, start with dollhouse elements. Your child will appreciate the creative solutions for the decor of the doors, and you will have the courage to realize your wishes for their renovation in your home.

Video: how and how to update old interroom doors?

How to repair?
Option 2: wallpapering
Method 4: vinyl stickers
Method 5: overhead facades
Method 6: updating the canvas
Hardware decor
Renovation is easy

A door made of solid wood during repair often does not need replacement, but restoration. This measure will save on updating the canvas and keep a high-quality product in its place. In addition, the restoration of wooden doors helps to adapt them to different styles, which periodically change during the renovation of premises.

Refurbish or replace?

When the question arises of changing the door, few people think about the fact that it can be restored. When is it really the best measure:

When the repair of wooden doors is impractical and it is rational to choose to reinstall the unit:

Old door leaf and frame, which have become unusable: they have cracked, cracked, the integrity of the structure has been broken;
The door is made of cheap materials: fiberboard, MDF, etc.

The decision to update the entrance or interior door should not raise concerns about the work, they can be done independently. Below we give detailed instructionshow to update doors, consider how to restore paintings and door frames.

What tool is useful for work

To update or restore an old wooden door, you need to prepare the canvas for work. To do this, you need the following tools:

For the restoration process itself, they will come in handy:

Spatulas for leveling grooves and irregularities on the surface of the canvas;
Wood putty, close to the natural color of the base;
Stain, varnish, paint depending on the selected type of restoration;
Brushes, sponges and rollers for the uniform application of the colorant to the solid wood.

Preparing the canvas for updating

Before proceeding with the repair of old wooden doors, it is necessary to take a number of measures to prepare the door leaf and box:

In cases where there are significant potholes on the door, a piece of wood can be laid in them and rubbed with a spatula. The method will save on materials - the cork will be securely fixed in a small amount of solution.

How to repair?

When the preparatory work is over, the plaster is dry, you can start decorating the canvases. There are several ways to restore a wooden door:

Sanding with painting and varnishing;
Wallpapering;
Stencil drawing;
Vinyl stickers;
Overhead facades;
Updating the canvas.

All methods are used in modern restoration work. Each process requires an individual approach.

Option 1: sanding and painting

This is the ideal way to restore veneered surfaces. A correctly selected composition of the coloring matter may not hide, but emphasize the woody pattern on the door. After all the preparatory work, the canvas is evenly painted in the desired color. For deep saturation with color, lay the enamel in 2 - 3 rows... It is difficult to veneer the coating without special equipment, and it is easier than ever to update the pattern and color. The old door decor can be preserved by staining.

Before varnishing, you should walk over the surface with a stain to prevent the development of fungi and mold.

Option 2: wallpapering

Repair door block wallpaper is another interesting idea that completely combines all objects and structures in the interior. You can update in this way at least every year during repairs and outside of this event: it is easily performed and the price of the coating comes out very small.

How to update wooden doors wallpaper:

On the prepared canvas it is necessary to apply a primer in 1 layer and wait until it is completely dry;
The wallpaper is pre-cut to the size of the door. This must be done carefully so that then the cut out contour coincides with the door. Ideally, make a paper overlay with a fold allowance.
Now apply glue to the wood and attach a piece of paper. If the wallpaper is non-woven, spread glue on the roll and glue it to the base... Smooth well and remove excess glue. After drying, attach the hardware and hang the canvas.

Option 3: stencil drawing

Do-it-yourself restoration of wooden doors can be done using stencils. They are sold ready-made or made on their own on a large sheet of paper or wallpaper.

To apply the finished drawing, follow the instructions:

The prepared base is covered with paint or varnish, wait for drying;
A stencil is glued to a dry surface;
Cover free space inside or outside;
Tear off the template and wait for the paint to dry.

Method 4: vinyl stickers

A modern option for interior decoration. Vinyl stickers are not afraid of moisture and water, the sun, they are easy to wash and clean if necessary. It is very simple to paste over the door with them: apply the sticker and smooth it. The advantage of modern interior stickers is their reusability and versatility. They are easily removed from the surface without leaving a trace; if desired, the location of the stickers can be changed. Suitable for decorating plastic balcony doors.

Method 5: overhead facades

Repairing interior wooden doors using conventional methods sometimes may not give the expected effect and the process will require drastic measures. When it is necessary not to restore, but to completely update the door facade, overhead facades will come to the rescue... They are made from different materials, it is advisable to purchase a cover made of MDF:

The door, restored in this way, radically changes its appearance.

Get a canvas of the right size;
Attach an overhead facade to the prepared base;
Attach it with self-tapping screws or PVA glue.

Method 6: updating the canvas

How to update an old interior door if you want to add or change the arrangement of glass in the canvases? To do this, you have to work:

Hardware decor

If the door is old, it is probably equipped with fittings made in ancient times, which is a real crime to throw away. When the handles and hinges are worn out, it is better to refurbish rather than throw away.

To breathe life into the accessories, sand the products against possible corrosion, cover them with a layer of primer-enamel. She will not hide the ornament applied to the handles, but only emphasize it favorably. Once dry, the handles and hinges can be attached back to the canvas and hung in the opening.

Renovation is easy

We told you how to make a new door out of an old door without replacing its main parts. These processes may seem complicated, but in fact, even an inexperienced master can handle them. The main thing is to start. You can change the appearance of any door:

Input;
Interroom;
Leading to the balcony.

You can come up with your own method of restoration: covering with acrylic paints, painting, etc. The main thing is to organize correctly preparatory stage to create a working base, and then it will go like clockwork. The main thing is not to be afraid and start.

Even in those apartments that have already been renovated, there are old, worn-out interior doors with minor defects or significant damage. Abrasions and scratches give a completely unaesthetic look to the interior of the room. It would seem that there is only one way out - to update the door. However, buying a new product is often costly. Therefore, it is a competent restoration that will help to get out of this situation with dignity.

Subtleties of the process

Old or damaged interior doors are subject to restoration. Mechanical damage can be caused by fire, for example. High humidity can also adversely affect the wooden canvas. Often, mechanical damage also occurs after opening doors with the use of improvised tools. When restoring the product, the replacement of the door leaf, the renewal of the door frames, painting or toning of the surface may follow.

To resume functionality, it is often necessary to update fittings or locks. With minor damage to interior doors, restoration work can be done by hand.

Repairs original doors it is better to entrust a specialist in this field. The work should also be left to a professional if the restoration requires replacing the door frame or repairing the entire door frame as a whole.

For review, some advantages and features of the restoration of interior doors are presented:

Doors from solid wood it is profitable to repair, bringing it to a proper and working condition, rather than spending the budget on a new product.
Renew the old door when changing the interior style in the house. The procedure is performed even when the canvas is still in excellent condition and does not need to be replaced yet.
Restoration of old wooden structures is performed when the door leaf and door frame are handmade, have a unique ornament and texture.
Do-it-yourself door surface decoration will allow you to create a unique product that will harmoniously decorate the entire interior.

The interior door must be repaired if, due to the replacement of the door, the integrity of the opening or wall cladding may be compromised.
Due to the non-standard size of the old door, it is better to carry out restoration work than to carry out a laborious replacement of the product.
The restoration is convenient, since the replacement of the product is often accompanied by the replacement of the entire door frame. This procedure will unambiguously create the need to seal up the resulting cracks, plaster and glue wallpaper around the doorway.

For independent work, you will need a lot of free time. The phased implementation of all procedures will be the key to the successful restoration of the door leaf.

The successful application of methods for restoring a product, first of all, depends on the characteristics and properties of the material for making the door leaf.

Materials

Previously, interior doors were made exclusively from natural solid wood. Currently, the composition of door panels includes polymers, glass. The surface can be coated with quality varnish or laminated. Oak doors or beech products are premium door leaves with a graceful natural texture and different shades.

The increased strength and durability make such interior products desirable and practical. Only the price due to these advantages is very high. Carrying out work on the restoration of products is out much more economical than replacing the entire blade.

Fiberboard is a popular material in the manufacture of canvases. The restoration methods of such doors differ from the restoration work of products made from solid natural wood. To remove a layer of old paint from the surface of a fiberboard product, an iron and a hair dryer are used. Given the fine structure of the surface of the product, grinding work is carried out only with fine sandpaper.

With the help of finishing elements, by slightly changing the surface relief, you can get an analogue of a paneled canvas. Expensive models consist of dense tile material. A high-quality surface finish of the product determines the value of the product.

Pasting with innovative veneer is often used. The basis of the door will be inexpensive material pine, lumber or particle boards... Under the influence of temporary changes, veneered products can lose the integrity of the top layer. For the restoration of such doors, special wood glue is required. When using glue it is also necessary to take into account the favorable temperature regime and avoid humidity.Violation of this mode can negatively affect the veneer surface, which leads to swelling and delamination of the material.

For amateur use metal structures in home. Iron doors also tend to wear out, unless, of course, these are armored products. Even on high-quality canvases, the external finish deteriorates over time, locks break, accessories crumble. Long-term operation significantly affects the appearance and construction mechanism of such doors. In iron interior structures, aluminum or stainless steel is mainly used. Metal parts are successfully combined with other materials.

If you buy new door, then high-quality metal products are expensive. Therefore, it will be much more profitable to renovate the old door. According to the experience of professionals, it can be noted that any options are amenable to restoration. metal doors... Professionals can replace hinges, handles and locks in accordance with the color scheme of the door leaf to be restored.

Options for different models

The "Stalinist" door can be confidently ranked among antiques. Household items of this era are usually bivalve, often with glass inserts. In the “stalinka”, the items are heavy and bulky, which makes it a little difficult to restore them. A professional master can easily pick up modern material for their facing, the necessary fittings and type of decoration.

Door leaves and the surface of historical "Stalinist" doors are usually wooden. If the cause of damage is not mechanical impact, then abrasion is the influence of time.The restored wooden doors should have an aesthetic appearance. The craftsmen will help you choose the main material and finishing, give a laconic look to the old doors.

In an apartment with an atmosphere of Provencal or scandinavian style interior door restoration is also decorative. Finishing with the inclusion of patina and painting will transform the usual old white door into a stylish decor element. The presence of frames and crossbars characterizes the prefabricated interior door, which is also called paneled. For example, panels can be in the form of MDF sheets or glass inserts. So it is possible to create curly elements and make the appearance of the canvas quite interesting. The restoration of paneled doors means preserving the existing reliefs or full replacement product surface.

This option is suitable for offices, bathrooms and toilets, balconies and other rooms with high humidity. Economical and moisture resistant models are indispensable for such premises.

Glass is often used as an insert; there are also options for fully transparent doors for a modern living room interior, for example. Only types of glass sheets of special texture are used. For safety reasons, the material must have a protective film, not form sharp fragments when broken, which is also taken into account when restoring such canvases.

How and what can be updated: ideas

Various materials are used to repair and decorate an old or damaged door. The color design of the provided material is also diverse. It is better to entrust the complex work of door restoration and surface decoration to a specialist in this field. It is possible to eliminate minor scratches and simple work on decorating the old surface by yourself.

In a simple way door upgrade is surface painting... Anyone can paint the surface. Both for painting and for other types of restoration, first you need to prepare the surface of the product. Cleaning and freeing the surface from the old coating will be the first step in the restoration of the product. Fine-grained skin will perfectly clean it of old paint. After that, small cracks and scratches are smeared, then the type of coating and decorative elements are selected.

Acrylic paint is available for painting in one color. In the case of restoration of a wooden door, paint and varnish are selected for woodworking.

Multi-color painting is a more complicated process. To do this, using masking tapes, different shapes are created on the decorated surface. After applying paint over the created picture, an interesting geometric ornament is obtained. Different colors can be created by adding dyes to a white base. The existing method of surface tinting will help create the effect of the presence of the most expensive types of wood in the composition of the canvas.

Special tinting impregnations - stains, will give the wood any desired color. As a rule, these are the tones of elite tree species. Due to this, the pine covering can be given a visual resemblance to a walnut canvas. Of course, it will only be external. Such a property as moisture resistance, resistance to decay is not acquired in this process.

When painting, it is also taken into account that the wood during processing tends to absorb paint a little. Therefore, it will be necessary to apply another layer.

When working with paint, you can create not only plain doors, but entire compositions. Designers from the original sketch will be able to recreate any drawing if applied through a stencil. It is also better to entrust the idea of \u200b\u200brestoration in the form of artistic painting to professionals, since one cannot do without artistic skills. Additionally, you can tackle the protruding parts, that is, the moldings. They are also dyed. For an original effect, they can be decorated in a contrasting tone.

In the case when the door is flat, without relief and moldings, you can simulate their presence with an ornament, or stick polyurethane carved slats. Reiki must first be painted in the desired color.

The next stage of finishing is decorating doors with wallpaper, fabric.In this case, there are no special restrictions, since almost any images and materials of different textures can be glued to the door. First of all, you can pay attention to the photowall-paper, which is presented in abundance in specialized stores. Any paper materialsas well as standard wallpapers can be useful too.

Care must be taken that the material is not too transparent. Otherwise, glue or hidden reliefs will appear. At the end of the installation, it is recommended to apply a layer of varnish using wallpaper, fabric or paper. This coating will protect the door surface.

Many models of interior doors have inserted glass, and therefore stained glass design is very popular. Special stained glass paint is used to apply drawings and ornaments to glass surfaces. For independent work, materials for painting and stained glass work are purchased at any special store. Drawings can be transferred to glass by sandblasting the surface. In a specialized workshop, they can simply do this kind of work.

Gluing vinyl stickers as a way to decorate and restore a product is one of the simplest procedures. Vinyl door stickers are sold almost everywhere. The protective coating can be easily removed. The film is glued to the door leaf without preliminary preparation. After the end of the work, the protective film on the outside is also removed. It is worth considering that vinyl decals can even be painted.

The decoupage technique is also simple to perform and makes it possible to hide minor defects. In the process of this finishing, pieces of material, paper, napkins are collected into a single semantic picture, glued to the surface and varnished.

The option of finishing by building a picture from a mosaic is original and not expensive; in the process, fragments of ceramics, glass, wood, veneer are used. In addition to standard methods of restoring interior doors, you can apply an extraordinary design method. Doors are renewed using various bulk materials. When gluing the surface with cereals such as rice or buckwheat, you will get an exclusive and original work.

To fix the grains, you can purchase PVA glue. After complete drying, it is recommended to varnish the surface several times to protect it from moisture. Considering that the cereal is dry in consistency, does not rot and does not deteriorate, and the varnish coating keeps the composition from moisture, there is no doubt about the durability of this design.

Recovery workshops

Minor damage can be repaired on your own and at home. To do this, it is necessary to properly prepare the tools and materials for restoration. The stages of work are as follows:

On initial stage the door must be carefully prepared. For this, the features of the material of manufacture are taken into account. Basically, wooden products are subject to wear. If the interior doors are covered with veneer, wax, soft in consistency, as well as a special varnish and a tool in the form of a spatula, are purchased to work with the surface of the door leaf. For wooden products, hard wax, coarse sandpaper is required.

Before starting work, you must carefully remove the door from the hinges, fittings and the locking device. If there are glass inserts, then they must also be removed, since all fasteners will be dismantled. It is better to carry out restoration work on the door indoors with sufficient lighting. Protect the product before placing it in the workplace. flooring, since there is a risk of damage to it, since the paint from the damaged product will be removed under the hot stream of air from the hair dryer.

From the surface of the door it is necessary remove dirt by washing it with soapy water.After the door is examined for the presence of significant defects. Minor scratches can be filled with putty. Further wooden canvas wrapped in a flannel rag. The process begins with sanding the surface with the removal of excess wax using solvents. Further, it is recommended to varnish the surface.

In any case, when working on the restoration of a door with a painted surface the old coating must be carefully cleaned off.Doing it yourself is much easier than it might seem, since the necessary tools for work, only a spatula and a construction hairdryer are needed. The latter does not have to be purchased; it is currently available for rent. If in the future door decoration will be carried out, remember the platbands and the door frame. They also need to be finished in the color of the door itself.

After removing paint the surface is examined for scratches and other damage, they can be sealed with both putty and specialized putties for wood. The final stage of preliminary preparation is sanding and sanding the surface with sandpaper. In order to protect the door from the influence of moisture, the sealed surface is treated with linseed oil. The same property is also possessed by ordinary stain, which, in addition to protection, will give the surface a natural color.