How can you clean the interior doors from stains? How and what to clean the front iron door. We clean chipboard doors

Each housewife, while cleaning the house, strives to achieve perfect cleanliness. But greasy stains do not give up, especially trying to stain the entrance and interior doors. And to what extent do not put a gloss on, if the handles and bottom are stained with dirt, then the result of cleaning will be low.

Things to know before cleaning

When starting to clean interior doors, you need to consider some points:

• Do not start washing door coverwithout testing the selected cleaning agent. To do this, you need to use an inconspicuous area. If negative consequences have not come, then you can proceed to a full-fledged surface wash.
• Do not use various hard brushes, metal scourers and scrapers. They will certainly lead to the fact that the integrity of the coating will be violated. After removing the stain, it will be necessary to repaint or change the entire door.
• Do not use the following strong cleaning agents: 96% alcohol, pure undiluted acetone, acids and solvents.
• Do not leave the cleaning agent, like water, for a long time on the surface to be cleaned in order to avoid unpleasant consequences in the form of swelling or lightening of the area.

Methods for cleaning doors made of various materials

Before proceeding with the removal of greasy stains from the surface of interior doors, it is necessary to clarify what material they are made of. The methods of cleaning depend on this.

Particleboard and MDF (checked by editors)

Method 1: citric acid or vinegar is good for cleaning chipboard and MDF surfaces. Prepare a solution of 2 tbsp. l. lemons (or table vinegar) in a glass of water and use a soft sponge or cotton pad to clean the problem areas.

Method 2: make a soda solution (for 200 ml of water, take 3 tbsp. L. Funds). The dirt is washed off with a soft sponge soaked in it, and then wiped dry with a clean cloth.

Method 3: Prepare a solution of water and dishwashing gel and froth well. This foam is applied to greasy blots and left for 5 minutes. After that, the remaining dirt is washed off with water and wiped off with a dry cloth. This method is suitable even for white items.

Be sure to polish the surface with a soft flannel after cleaning with any of the above methods.

Verified by the editors: oily old stains on MDF doors. Previously, an alcohol-based glass and surface cleaner was used for cleaning. The result of cleansing is 10 out of 100.

On one of the doors was tested citric acid solution... The photo shows 100% removal of stains from the door. But it was not easy. The procedure had to be repeated several times with pressure. It is very difficult, time consuming and troublesome to wash an entire door in this way.

result after cleaning stains with citric acid solution

The next test is cleaning soda solution... Door stains are cleaned quickly, without any effort. After cleaning, you need to wash off whitish stains. The only drawback is that the drops fall on the floor, which will need to be washed immediately. And this may not be part of the plans of those who are used to general cleaning do partially. Which is even correct, so it's worth spreading something.

the result of cleaning with a soda solution

See also: on interior doors.

Laminated

The surface of such doors is a particularly strong laminating film, with the exception of paper, which greatly simplifies the task of washing greasy stains.

1. The first method requires alcohol. Dilute it at the rate of 9 parts of water to 1 part of alcohol. Place a cloth soaked in the solution on the stain for 5 minutes. Then wipe the door dry.
2. It washes very well the laminated surface with 72% laundry soap. To do this, grate it on a coarse grater and prepare a thick soapy solution from it. To prevent the material from absorbing water, the procedure must be done as quickly as possible. A foam sponge is used to wipe the stain, and then moisture is removed with a paper towel dry.

Do not use abrasives and chemically active reagents (acids, alkalis) for cleaning laminated products.

If, nevertheless, the stain could not be removed, you can purchase a special masking pencil to match at the hardware store.

Wooden surfaces

Dirt can be removed from a wooden door with talcum powder. Put some powder on a sponge and rub over the greasy stain. Remove the remaining traces with a damp cloth, and then wipe everything dry.

Raw potatoes will also help clean the wood interior door from greasy marks. It is necessary to cut the potato and grate the problem area with a cut. Then remove the residue with a damp cloth and wipe dry.

For the next method, prepare a mixture of 3 tbsp. l. white clay and 2 tbsp. l. vinegar, and then brush over the dirt with a small brush. After waiting for everything to dry, you must remove the remnants with a damp sponge.

Painted doors can be cleaned with 9% vinegar. Soak the stain with a cotton swab dipped in it, and then remove the dirt with a damp cloth.

Glass

To remove stains from such doors, you can use a regular glass cleaner, or prepare an alcohol solution at the rate of 1 tbsp. l. for 1 liter of water (can be replaced ammonia in the same proportion). After washing the glass surface with this solution, rub it with crumpled newspapers.

Veneer

These are thin sheets of wood used to cover doors or furniture. For veneered surfaces, it is best to use a wax polish. A raw potato will help to clean old greasy stains, as in the method of cleaning wooden door products.

If you promptly get rid of greasy stains and wash interior doors at least once a month, you can keep their original appearance.

Door cleaning - the ability to maintain an attractive appearance and integrity of the coating for a long time. In this case, the care must be regular and correct. Doors, like any other household item, need cleaning. For this purpose, suitable cleaning agents are specially selected depending on the material of the door surface, its color and some other parameters. Let's figure out how to properly care for the interior and front door.

• adjust the doors before washing;
• lubricate locks and hinges with a special tool;
• make sure that the room has humidity up to 65% and temperature up to 24 degrees;
• remove any fresh stains from the door surface as quickly as possible, without delay;
• cover door structure varnish, especially if it is a low-quality canvas;
• close the doors with foil if repair work is planned;
• in general, use the door very carefully so that you do not have to try to repair serious dents or deep scratches.

The correct cleaning agent must be selected... In particular, veneer and natural wood are cleaned in completely different ways. If you do not take this into account, there is a possibility of hopelessly ruining the door covering. In addition, it is recommended to consider the following tricks:

• with cool water with a few drops of ammonia, wash the glass in the decorative stakes in the door;
• use soapy water to clean metal door elements;
• wipe the doors with soft cloths only;
• get special microfiber napkins for cleaning doors;
• once every 3-4 days, wipe the decorative elements, handles and inserts of the structure from dust;
• use a disinfectant (a weak solution is sufficient).

The main reasons leading to the fact that the door covering loses its aesthetics is insufficient or improper care, careless handling of the door.

Important! Sprays, aerosols and specially designed products are perfect for cleaning the door. They are applied to the door covering through a spray gun, allowing you to wash off any dirt.

Fight fat

Fighting grease on wooden doors is a must, especially if they are located in the kitchen opening. The easiest way to use folk remediesthat are effective and safe to use. You can give preference to the following methods:

1. Use a water / surfactant solution or dishwashing detergent to remove stains. The method is effective for wood and MDF doors.
2. Use a raw potato cut for quick removal of greasy drops or stains. Finally, wipe the area with a slightly damp cloth.
3. Mix equal proportions of clay and vinegar. You should get a mixture that resembles a gruel. It is applied to the stain and allowed to wait for 20-30 minutes. After that, it just remains to be washed off. This method effectively fights all types of stains, including greasy marks. For the most serious dirt, you can repeat the cleaning procedure 2-3 times. The method is suitable for cleaning unpainted wooden doors.
4. Sprinkle talcum powder on a napkin and press on the stain on the door for 5-10 minutes (you can use scotch tape). After this time, wipe off the talcum powder from the door surface and wipe the surface with a dry cloth.

To restore the glossy shine of the surface, you need to wash the door with a solution of water and vinegar (1 tablespoon of the product is enough per liter of water).

Remember that all solutions must be rinsed off the door surface with cool water. Finally door leaf it is thoroughly wiped dry. The use of metal brushes, hard sponges and products containing abrasive substances is unacceptable.

It is important! By the way, getting rid of dust is very simple.To do this, it is enough to wipe the door leaf with a dry and damp (but not wet) cloth. Finally, it needs to be polished using a door polish.

Glass cleaning

Cleaning glass is not an easy task. It always seems that you can easily wipe the glass insert on the door, and it will shine clean. In fact, there are always divorces, which are a real problem to eliminate.

1. Onion juice or soapy water can help remove greasy stains.
2. The matt surface can be washed with a starch solution (add 20 grams of starch to 500 ml of water).
3. Alcohol, thinner, acetone, and even nail polish remover can quickly get rid of glue, coffee and tea. However, you need to act carefully so that the funds do not come into contact with the box, rubber seals, and the skin of the hands.

You do not need to use alkalis, acids, gasoline and ammonia in a concentrated form to clean frosted glass. Scraping off dirt with a knife or scraper is taboo.

It is important! First you need to clean exactly the glass inserts of the interior door, and then the door leaf.

Tips for caring for your iron front door to help keep it clean:

• a napkin dipped in hot water will remove traces of scotch tape;
• acetone-containing liquids will help get rid of old scotch tape residues;
• white spirit or other solvent will help remove traces of paint;
• sandpaper will help get rid of traces of lime and whitewash (you cannot use this method for cleaning iron doors with vinyl or leather);
• vinegar solution will help to cope with stains and whitewash marks;
• a solution of water and kerosene will help remove plaque;
• products containing acetone or alcohol will help get rid of polyurethane foam, which did not have time to harden.

How to clean plastic?

How to clean plastic? It's very simple. It is enough to use soapy water. You can give preference to the other above-mentioned compositions, but in most cases this is not necessary, since all contaminants are easily wiped off.

You can also use vinegar, liquid detergent, and baking soda. Effective for cleaning special sprays and cleaning agents for plastic surfaces.

It is important to take into account that plastic cannot be rubbed, washed with metal sponges, or rubbed with a brush. This leads to its damage, the appearance of microcracks, into which dirt is subsequently clogged.

What about defects?

Defects that may appear on the door during use can also be fought. In particular, it is recommended to heed the following advice:

1. Use beeswax sprays and polish to remove small cracks and other subtle blemishes.
2. Use a suitable wax crayon colors to remove deep scratches. It is enough to rub the damaged area to fill the void of the crack.

Caring for doors is a feasible task for everyone. The procedure is not complicated and does not require serious economic costs. Regular maintenance is an opportunity to extend the service life of the door surface, to take care of its aesthetics.

Professionals advise how to clean wooden doors yourself, and what products are best for this. Modern doors are often embossed, decorated with decorative slats and mosaic patterns.

Door handles take on an untidy look in a short time after cleaning and also need separate detergents. Therefore, it is better to learn the rules for cleaning doors from various materials.

Basic rules for door care

In order for the doors to serve as long as possible, the owners should:

• take into account that the tree does not like humidity over 65% and temperatures over 24 degrees;
• takes good care of the doors to prevent damage;
• various stains are removed from the doors immediately;
• if the door leaf is not of high quality, it should be varnished in two layers - then the problem is how to wash it mDF doors will not be.
• for a while renovation works, the doors are covered with polyethylene.

Choice of detergents for doors

The following are used for door washing:

• neutral detergents;
• glass in the doors is wiped with water and ammonia and wiped dry;
• metal inserts are washed with soapy water;
• doorknobs disinfect.

Common cleaners include Mister Muscle and spray spray. They wipe the doors and remove greasy stains from the glass.

Clearing doors

The wood should not be wiped with a wet cloth, so wring it out before washing. To remove stains on the door, apply:

• dishwashing liquid is used for the door leaf;
• fatty spots are eliminated by rubbing them with a cut of potatoes;
• with a mixture of clay and vinegar in the same proportion, cover the spots, stand for 30 minutes and wash off with water;
• to add shine to glossy glass, apple cider vinegar is added to the water;
• first the glass is washed, and then the door;
• smooth glasses are washed with a soft cloth, embossed ones - with a brush, and for frosted glasses, starch is added to the water.

The problem of how to clean white doors appears especially, because dirt is more noticeable on them. The main thing is to apply a detergent to soften the dirt, and after a while, wash off the dirt with water and wipe the doors dry.

Elimination of surface defects

When damage to the door could not be avoided, they are removed with a wax pencil that matches the color of the door. If the damage is deeper, you need to use a putty on wood, then paint or varnish the doors.

All formulations are washed off with clean water, after which the doors are wiped dry. When washing, do not use metal sponges and abrasives, so as not to damage the surface of the doors.

Only with proper and systematic maintenance will your doors retain their original appearance as long as possible. Of course, like any other furniture, especially products from natural wood, doors need careful treatment.

How can you clean wooden doors?

No matter how often you clean the house, no matter how clean you have it, these interior doors get dirty over time. A greasy coating appears on them, since there are always a lot of impurities in the air, dust settles. Either way, you see that it's time to clean the doors. What is the best way to do this?

Of course, there are many specialty cleaning products in stores, but you may be able to do without them. At least it's worth a try. So, you will need plain clean water, if this is not enough, then make a weak soap solution, or add alcohol to the water. Before wiping the door, squeeze the rag well.

If just water does not help you, then take a soap solution. It does a great job on light pollution. If the stains are already noticeable on the door, then use an alcohol solution. This recommendation will be especially useful for those who have chosen such a solution, that is, put doors in their house. white... Indeed, on such doors, any pollution will immediately catch the eye.

It is necessary to remember that in both the first and second cases, you initially take a soft cloth, moisten it in a washing solution, wring it out, wash the door with it, and then wipe it thoroughly with a dry cloth. The door should not sour and wet. Do not wash the door with washing powder or any abrasive products. If the method described above did not help you, then it is better to purchase a polish with beeswax in the store, and already clean the door with it. This tool is excellent for both varnished and unvarnished wooden doors, while all the dirt simply dissolves, and the surface is not damaged. But that's not all, this polish is able to remove small scratches on a wooden surface. It creates a protective film on the surface, which in turn protects the wood from dust, grease, drying out, but also significantly improves the appearance, gives the door shine. Yes, polish is not the best cheap remedy, but nevertheless it will be enough for you for a long time, and in terms of quality it is worth it.

Even if your door is outwardly clean and free from damage, you still need to clean it at least once a year. This will help keep the door new for many, many years, and it will bring you joy and create coziness. After all, the door is the same part of the interior that affects the entire mood in the house, the entire appearance, and is largely capable of showing the character of the owners.

Keywords: How to clean a wooden door, Basic cleaning methods, How can you clean wooden doors, interior doors, how to clean, alcohol, water, polish, soap solution, white doors, white doors, color

General cleaning activities affect all aspects of life. We remove dust from all surfaces, wipe floors and wipe windows and household appliances. Among the standard procedures, the equally important, but less frequently produced processes are so easily lost.

Today we will talk about doors, or rather what means to wash them and how to do it. We will answer the most popular questions in the field of high-quality care for door leaf, glass and fittings.

Doors are an integral part of our home

Highlights

Interior doors, no less than other objects in the apartment, accumulate dirt and dust. This is especially noticeable if the door leaf is not monolithic, but has various carved parts, glass. Traces of dirty hands immediately appear on light doors, and the fittings are covered with a sticky layer of dirt mixed with dust.

Eco-veneer is especially vulnerable to dirt, because, by and large, it is just a textured film with which the canvas is glued. Film for eco-veneer is produced in different countriesenough quality material obtained by Koreans, Japanese, Italians.

In order for the door to please us with its cleanliness and it was pleasant to touch it, we will have to take care of it during operation. In addition, now deaf canvases are not so popular, because the door is most often an integral attribute of the overall picture of the interior of the room, therefore it should be colorful and beautiful, which means clean.

Doors support the interior of the room

Let's highlight the main points in door care:

• It is necessary to devote time not only to washing the door leaf itself, but also to cleaning and adjusting the fittings. If it looses, you need to tighten it, if it creaks, lubricate it.
• If you have doors made of natural wood or solid wood at your home, it is worth adjusting the indoor climate. It is undesirable to allow the temperature to rise above 25 ° C, and the humidity above 70%.
• Severe damage to quality doors you cannot hide, there is no way to hide any scratches or dents, so try to be careful with the material.
• In case of dirt and stains, try to wash your interior doors immediately, it is better not to wait for the dirt to absorb into the structure of the material.
• Old doors are not of the best quality, or a modern eco-veneer can be additionally protected from contamination by varnishing. Not the smartest way out, but affordable for everyone.
• When renovating, cover the doors with plastic, like other pieces of furniture, so as not to get dirty.

Doors are made from different materials: pvc, laminated, eco-veneer, natural veneer, solid wood. For each material in ideal its detergent composition, or just pure water. To properly wash and clean the canvases, you can use the following tips:

Pay attention to the door hardware when cleaning

• Many modern doors equipped with glasses, to wash them without smudges and streaks, add a couple of drops of ammonia to the water, provided that they are not frosted.
• Metal parts on doors can be washed well with ordinary soapy water.
• To avoid damaging the door covering, it is best to wash and wipe the surface with a soft cloth such as chamois or microfiber.
• Dust will surely accumulate on decorative inserts and carved door elements, so do not forget to remove it during weekly house cleaning.
• When finishing washing the door leaf, pay attention to the fittings, wash and disinfect the handles.

More often than not, the door breaks down or loses its aesthetically pleasing appearance through our fault, due to poor handling and lack of proper care. But we want the door to serve us faithfully for a long time, so we choose suitable remedy and we will wash it.

Detergents

Means for cleaning doors are selected taking into account the material from which it is made, the degree of pollution and the presence of decorative elements on the surface of the canvas.

Multipurpose detergents sold in spray form are very popular. They are very convenient to use, they do not have pronounced chemical odors and help to clean surfaces of different quality from stains and other contaminants: glass, wood, pvc, eco-veneer. You can buy detergents for a specific type of door covering in the same stores that you bought your doors.

White and light doors require more care

Wooden doors require more attention to themselves than canvases made of veneer or eco-veneer (3D film). They do not like a huge amount of moisture, so when doing wet cleaning, make sure that the rag is slightly damp. Wooden doors can be rinsed with plain water without using detergents, but in most cases dry cleaning will suffice. To protect the canvas from dirt, use a polish.

Among the folk detergents with which our compatriots try to wash doors, the following compositions can be distinguished:

• Dishwashing liquid does an excellent job of removing dirt from veneer surfaces. Eco-veneer can also be wiped with a similar surfactant composition.
• Greasy stains can be removed with potatoes by cutting a fresh potato in half and rubbing the stain on it. After removal, rinse the cleaned area with plain water and wipe dry with a cloth.
• For doors made of solid wood and natural veneer, not particularly fond of wet cleaning, housewives found good way removing greasy and dirty stains. Talc is poured onto the dirt, it absorbs dirt, and then wiped off with a dry cloth.
• To give the veneer door a shine, you can add to the clean water used for cleaning apple cider vinegar... Approximate proportion: 1 tablespoon per liter of water. Some types of eco-veneer can also be processed with this composition.

Do not forget to remove after washing detergent from the door with clean water, and then wipe dry. Do not use abrasive cleaning tools and compounds: brushes with iron bristles, scouring pads, detergent powders, with such a tool, you will definitely ruin the decorative surface.

Working with glass

If frosted or ordinary glass is inserted into the door, it is worth starting to wash the door with it, and only then go directly to the canvas. Smooth glasses are washed with ordinary soft rags with a minimum amount of lint, frosted glass it is permissible to rub with a brush with soft bristles.

Frosted glass is produced by sandblasting. With the help of sand, the top layer is knocked off a smooth surface, from which the glass acquires a cloudy appearance with a frosty effect. Frosted glass allows you to hide what is happening behind the door from a distance of 30-40 centimeters.

Frosted glass can be perfectly cleaned from greasy stains and fingerprints using dishwashing liquid or starch solution. To prepare the solution, starch is added to warm water, 3-4 teaspoons per 1 liter.

If desired, you can install all glass doors in the house

Complex, stubborn dirt is removed with alcohol, acetone, nail polish remover based on it. Frosted glass does not lose its decorative qualities. However, during handling, make sure that drops of solvents do not fall on the rubber elements of the box seal or the silicone filler next to the glass.

There is no need to process frosted glasses with solvents, gasoline, ammonia. Also, you do not need to scrape them with sharp objects, for example, to chip off traces of silicone.

If there are some defects on the door, they can be masked with polish. If cracks and scratches are more severe, then they will help to hide them. Match your door with a suitable shade, and rub a pencil into the surface of the canvas, let the wax fill in its flaws.

While maintaining proper cleanliness in the apartment, you will have to take care of your doors one way or another. Make them always look clean and tidy, because there is nothing difficult about this.