How to restore the varnish on the kitchen. Restoration of lacquered furniture at home. How to restore varnish on furniture

Over time, wooden furniture fades, becomes covered with cracks, chips and ceases to please the eye. Is it possible to restore the original appearance of things dear to my heart? And how, and most importantly - how to do it?

The easiest and most popular way to get rid of old varnish is to use special composition, as which you can use various professional products, for example, the Chief Technologist gel or the Prestige wash.

Well-known universal solvents are also suitable - acetone or denatured alcohol.

Using a paint brush, apply a cleaning compound to the damaged surface. In order for it to be properly absorbed, cover the product with plastic wrap and leave it for a day. During this time, the remover will penetrate deeply into the structure of the varnish, making it so soft that it can be easily scraped off with an ordinary spatula. After the old coating is removed, wipe the working surface with a sponge soaked in warm water. After 24 hours, we will clean the wood with a fine, fine-grained sandpaper, and then begin to apply a new varnish layer.

How to varnish?

When choosing a varnish, you need to focus on experience and personal preference. For a child's environment, you can use water-based varnishes: they do not smell and do not cause allergies. However, when dry, water-based coatings acquire a matte shade, which is not liked by everyone. For those who have not done varnishing before, experts recommend alkyd compounds, since they are inexpensive, easily lay on wood, and, if necessary, just as easily washed off.

It is much more difficult to apply polyurethane varnishes, since this requires a spray gun. They are the most durable and are preferred by professionals. Connoisseurs of expensive (antique) furniture often use furniture oils. Such a coating requires complex manual work using a tampon.

Apply a new varnish

Before applying, check the wood for roughness - slowly slide your fingers over the prepared surface. If the hand slides easily, without clinging to anything, then you can start varnishing. It is advisable to purchase a new brush in advance, and preferably two, because after the first rinsing the brush will no longer be so soft and it will not be very convenient to use it.

After diluting the varnish by 10% with white spirit, apply the first layer evenly. Let it dry for 12 hours and then sand it with 120-180 grit sandpaper. Wipe the surface with a soft cloth and start applying the second coat. It is no longer necessary to dilute the composition. So that it is well distributed over the entire surface, we will apply it first along the grain of the wood, and then across, but not vice versa. After 10 minutes, the varnish begins to harden, so everything needs to be done quickly.

After the coating is completely dry, let's see what happened. If the result is impressive, we will assume that the job is done. If not, apply the varnish again.

Video: How to properly varnish a tree?

Get rid of scratches and scuffs

If minor mechanical damage appears, it is not always advisable to re-varnish the product. Small scratches and abrasions are not difficult to get rid of with modern wood treatment products.

So, light rub can be painted over with a special toning felt-tip pen or stain. To do this, use a soft cotton cloth, which should be wrapped around the index finger, moistening the cloth with a drop of dye. Very small scratches can be easily touched up with transparent furniture wax by melting it on an electric melter. Likewise, using the same wax, only tinted, it is not difficult to paint over the chips at the corners.

We erase damage on gloss

Removal of damage on the glossy surface of furniture with a varnishing felt-tip brush

To remove scratches on high-gloss coatings, it is better to use a varnishing felt-tip brush, for example, manufactured by König. The painted surface must dry for two hours, after which it must be carefully polished.

All the tools necessary for restoration in a wide range are presented in specialized stores. However, sometimes it is quite possible to do with what is at hand - colored crayons (they contain wax), ordinary iodine, or even an eyebrow pencil. The main thing is to choose the material well by color. It makes sense to use polish to restore shine.

Lacquered furniture has not gone out of fashion for many years. The attractive appearance of its surface will decorate almost any interior, giving it a special chic. But no matter how carefully such furniture is taken care of, over time, scratches and even cracks appear on it. In this case, you should not be upset, as there is perfect solution Is a do-it-yourself furniture restoration. Of course, this procedure should not be carried out with cheap copies from chipboard. By and large, this is just wasted time. The old furniture, which was made for centuries, is subject to restoration. Polished Soviet is also easy to update at home.

Do-it-yourself furniture repair begins with an initial examination of the degree of surface damage. This procedure determines the sequence of further actions. The degree of damage is different and is determined by natural aging or mechanical stress. Let's list some signs:

visual identification of aging, loss of gloss of the varnish coating, the appearance of minor stains;
the appearance of a cobweb mesh on the surface of lacquered furniture;
the appearance of deep cracks or chips.

If any signs appear, you don't need to be upset. Restoration of lacquered or polished furniture is a simple solution to the problem, such work can be done carefully, without losing the value of the product and without disturbing the surface structure. After the restoration of the paintwork, your favorite things will delight you for a long time.

Before updating old furniture, remember that it is not always necessary to change the varnish layer immediately. Certain natural aging factors add charm and value to antique furniture.

Brief characteristics of the restorative compositions

A common way to eliminate small defects that cover the furniture surface in everyday life is to wipe it with a cotton swab soaked in alcohol. After processing the damaged area for a while, you can correct the position. But in some cases, this method can harm the decorative layer. Therefore, you should not experiment, it is better to choose a specialized composition.

Let's present the characteristics of some varnishes for furniture restoration:

Shellac varnish. The composition, after being applied to the surface, is able to successfully emphasize the texture of the wood and provide it with an original shade. It is a proven material that has been used for varnishing restoration for quite some time. The consistency of the varnish is not viscous, it resembles colored water. The restoration of the varnish layer takes a long time; to achieve the desired result, up to 40-60 layers of the composition are applied.

Related article: How and what to paint lacquered furniture (important nuances)

Nitrocellulose. This composition can restore polishing of a large area. For repairs and overcoating, it is necessary to use spray guns that are capable of providing the required working speed. Otherwise, droplets may form, which will quickly solidify. Under these conditions, a smooth surface cannot be achieved. Conventional spray guns for paints and varnishes will not work, it is recommended to contact the services of a restorer.

Pentaphthalic composition. It is very convenient to repair furniture with such varnish with your own hands, since no special devices are required for its application. After complete drying, a thorough sanding is carried out and a finishing layer is applied with a paint brush. In this case, the surface will be glossy. If a matte effect is needed, then the product must be applied with a swab. You do not need to purchase an additional product for priming. The first layer of pentaphthalic varnish acts as a primer. In total, at least four layers are applied.

After choosing a varnish for polishing furniture, it is worth deciding on the color of the coating. Very often, colorless varnishes are used to preserve the structure of the tree. However, when lacquered furniture is renewed, they try to match the lacquer to the surface tone.

Required tools and materials

Before you start restoring furniture, you need to prepare a number of tools and materials. So, you will need:

rag;
paint brush;
scraper and sandpaper;
masking tape;
solvent;
putty for wood (for serious defects);
as well as the paint composition itself.

Renewal technology of the varnish layer

The process of restoring wooden furniture with your own hands consists of several stages. As an example, the restoration of a crib will be given:

1. Preliminary preparation. Before refurbishing polished furniture, it must be disassembled. Next, we apply a cleaning solution to the surface, then rinse thoroughly with warm water. This procedure will soften the old polish, the varnish will crack and peel off in some places. Its remains must be removed with a scraper. Then carry out grinding with sandpaper. You need to start with a coarser abrasiveness and finish with a fine one. The surface should be matt and uniform. Next, remove the dust with a brush or a damp cloth.

Related article: What is the best way to paint wooden products?

2. Application of paint and varnish composition. The number of layers to be applied is determined depending on the selected varnishing material for the furniture to be restored. Each subsequent layer is applied after the previous one has completely dried (drying for at least 8 hours). If acrylic varnish is used, then to apply the first layer, the composition must be diluted with white spirit. Further, the restoration of furniture is accompanied by grinding the surface, after which another 2-3 layers of undiluted varnish are applied.

3. Stage of grinding the restored layer. Sanding the restored areas is carried out carefully with the finest grit sandpaper until a uniform matte surface is obtained. Then everything is thoroughly wiped with a rag. The renovation of the old thing allowed us to get a brand new bed.

On the video: restoration of a crib.

Features of partial restoration

Oak products are quite strong, so the restoration of oak furniture is mostly partially carried out. In this case, such techniques as decoupage or artificial aging are used. Let's take a closer look at how to partially restore wooden furniture. To do this, we prepare the following tools:

adhesive composition for decoupage;
acrylic-based paints;
scissors;
napkins with the desired pattern;
craquelure varnish.

Consider how the restoration of old furniture with your own hands is going on using the example of the tabletop of an old table. When upgrading some parcels, they should be fenced off from others. Therefore, using masking tape, we protect the unnecessary surface area. Then we carry out the following operations:

We paint the selected part with green acrylic paint and give it time to dry well.
Craquelure varnish is applied on top of the paint, and we also wait until it dries.
The next coat of paint will be narrower beige colour, after some time, the coating will begin to crack. To accelerate the formation of cracks, you can use a building hair dryer.
At the next stage, we cut out the ornament we like from the napkins. We place the images on the surface of the countertop and coat them with decoupage glue on top.
When the glue dries, apply a finishing coat of clear varnish.

Important! All work must be carried out with a horizontal surface. This will prevent smudges and streaks from forming.

As a result, we get a table with decoupage elements, which, by and large, will not differ from antiques.

On the video: a chair made using decoupage technique.

Ways to eliminate minor defects

Now let's talk about the methods that can be applied to initial stage... The appearance of any minor single defects does not require global work on surface restoration:

How to update furniture with your own hands if it has lost its luster? In order to restore it to its original appearance, it is necessary to look for a furniture care product containing orange oil in stores. The process itself consists in the fact that a foam rubber sponge moistened with water is heated in microwave oven... Next, the agent is applied to the surface and immediately rubbed with a heated sponge.

Related article: Tips for painting plywood

If there are minor abrasions, then restore the surface with the inner side of the banana peel. For more significant defects, such means are used: furniture marker for retouching, alcohol, wax. To begin with, the surface is cleaned of dust and dirt using a soap solution. After drying, begin to wipe with a soft cloth soaked in alcohol. In this way, we restore the original appearance of the coating. If the scratches are deeper, rubbing alcohol won't help. We retouch them with a marker. Then we polish with wax.

If the wood swells, when, for example, water has leaked and the furniture board has absorbed it, you can use salt and olive oil. The funds are mixed and applied to the damaged area, left for half an hour. Salt will draw out moisture, and olive oil will keep the wood from drying out.

How to repair furniture with more serious damage (chips, dents, etc.)? Here you cannot do without the filling process. A special mixture for wood works great, although you can also use automotive putty. Defects are carefully patched up, the mixture is allowed time to dry and then sanded with fine sandpaper.

Repairing wooden furniture is a simple but time-consuming process that requires endurance and patience. By performing all the stages of restoration correctly, you can extend the life of your favorite things. Basically, options were considered on how to restore old furniture with your own hands, which was still made from natural wood. At the present time, furniture is mainly made from chipboard sheets. It should be noted that the repair of cabinet furniture with your own hands is, in principle, no different. You can use all the algorithms presented above.

Folk remedies to help (2 videos)

Furniture before and after restoration (20 photos)

The car body is a part that requires care and careful handling. Careless driving, poor road quality and other factors are often the causes of defects in the car's paintwork. The appearance of small chips on the paintwork requires repair, because it spoils the appearance of the machine and causes further damage. Therefore, drivers sometimes need information on how to remove chips on the car body.

No car owner is insured against damage to the paintwork. In addition to careless driving, chips on a car appear for the following reasons:

unfavorable weather conditions - hail, temperature drops;
road strewn with rubble;
insects crashing into the car at full speed;
carelessness of others, physical damage;
incorrect car wash.

The car owner does not notice the formation of small paint chips. Only a careful examination of the body after a trip and cleaning the car from dirt helps to find possible defects. If they are found, it is advisable to repair the body as soon as possible. Leaving minor damage unattended is fraught with consequences.

Microdamages violate the integrity of the paintwork and become the reason for its further corrosion, and an increase in the area of \u200b\u200bthe defect will make repairs expensive. While waiting, the situation will be aggravated by the beginning of body rusting. Damaged paint will not inhibit metal oxidation. In this case, the car body will require a long and costly professional repair.

Types of chips and paintwork

The paintwork of the car consists of primer, paint and clear varnish, which serves as additional protection. Some paints already have varnish in their composition, so they do not require additional protection. In terms of depth, the chips on the machine are divided into damage:

varnish;
varnish and paint;
varnish, paint and primer.

By type, paintwork defects are divided into:

traces of polishing;
"Cobwebs" - minor damage to the upper layer;
water marks - small but visible defects on the varnish layer;
some small scratches;
deep scratches;

Repair is required when damage to each layer occurs, not just scratches that have reached the ground. Small chips are much easier to repair.

How to remove chips on a car body

Before proceeding directly to the repair, it is necessary to find all the chips on the body and assess the damage. To do this, you should carefully inspect the car, especially in the area of \u200b\u200bthe front bumper, headlights and radiator.

In order to properly restore a car, you should assess the general condition, determine if the soil is damaged. If the damage is not too serious, it makes sense to start repairing yourself with the help of specialized tools. There are the following ways to restore paintwork:

restoration of varnish with polish;
restoration of paint with a brush;
use of an aerosol can;
repair of chipped paintwork of a car with varnish.

Before starting to apply coatings, it is required to thoroughly clean the surface from corrosion. The place of damage should be cleaned from dirt. Using sanding paper to smooth the surface, create a base for the coating.

The last step is sanding and polishing the surface. Sanding is done with P2000 paper using a rigid backing and polishing with polishing paste and a cloth. To evaluate the result obtained, it is most convenient to use water and make sure that it spreads evenly over the surface.

Polish, anti-scratch, polishing pastes

This restoration method is used to remove small chips on the machine. Shallow damage is covered with a special paste, anti-scratch, after drying. This helps stop further corrosion and makes chips less noticeable. The main advantages are simplicity of execution and reliability of the coating. Among the disadvantages is the duration of the work.

Some car owners prefer to process periodically. This allows you to get rid of subtle defects in the early stages, prevent further corrosion and renew appearance cars, giving it a shine like after painting.

Chipping with polishing paste will be noticeable if:

in case of damage to a large area, the shade changes to matte;
for deep scratches, the coating will not give an effective result.

The pencils

This method refers to the restoration conditionally. Pencils are most often used as temporary removal of chips. This is the easiest way to repair chips on a car body with your own hands. There are three types of restoration pencils available:

wax;
gel corrector;
coloring pencil.

Wax stick - used to remove chips of any depth. In appearance and method of application, it resembles lipstick. The composition of the substances of such pencils contains a corrosion inhibitor, so it is a reliable, but short-lived protection. For temporary repairs, coat the surface with a pencil without cleaning it from corrosion.

Gel corrector - the ability to do without polish for the restoration of paintwork. The liquid in such a pencil has a high viscosity and hardens for a long time. After the restoration of the defect with such a pencil, the surface does not visually differ from other areas.

Color pencil - a bottle of paint, ready to use. It works well to cover up small chips on the car or light damage. Particularly sensitive to corrosion. After use, the surface is recommended to be varnished and polished.

Aerosol cans

The optimal tool for eliminating large-area chips. It is made after grinding and cleaning the damaged area from the old paintwork layer. When correct selection the colors of the painted places do not differ from the rest of the body.

Spray paint lasts longer than pencil paint thanks to even application. An additional advantage is the ability to paint over hard-to-reach areas.

In addition to paint, the spray cans have an auto-primer necessary for painting small but deep chips. There is also an acrylic paint that does not require varnish.

Repair of chips with varnish

Varnish is the top protective layer of the coating. In case of serious damage, opening with polish is not enough. After local repair of the chip, varnish is required.

The surface is coated with varnish after the paint has completely dried. The varnish is applied in several thin layers before the surface of the damaged area slightly protrudes beyond the level of the outer part of the paintwork. After that, the unevenness is corrected by leveling the surface with the help of grinding.

If the chip reaches the metal and causes corrosion

The neglected defects cause corrosion. If the damage has reached the metal, an urgent repair of the chip on the car body is required.

To remove such a defect, sand the surface around it with coarse sandpaper. In order for the paint to lay down better, the boundaries of the area to be restored should be flat. After cleaning the surface, treat it with a primer and wait for the layer to dry.

It is advisable to seal the chip with paint containing varnish, since when it is coated over the paint layer, the place of elimination of the defect will be noticeable.

Chipping Tools

To eliminate defects on the body in car dealerships, special kits are sold. These include primer, paint and varnish, and coating brushes. The body chip repair kit has a wide range of colors and allows you to repair almost any defects and scratches.

If you find minor damage to the car body, do not ignore them. Careful handling of the machine, as well as timely repairs, will keep the paintwork of the machine in good condition for more than 10 years.

The restoration of lacquered furniture is optimal solutionif the surface is scratched or cracked. Only wood furniture can be upgraded. Particleboard products become unusable after removing the paintwork from them.

We fix minor defects

No matter how carefully the furniture is handled, scuffs, scratches, stains and other minor defects occur during its operation. In this case, the owners have the question of how to update the furniture with their own hands. There are many ways to restore varnish:

When the polished surface loses its shine or small stains appear, you should use any wood care product that contains orange oil. For even application, use a spray bottle. Then the agent is evenly rubbed over the surface with a cotton rag.
Another way to remove stains is to use a special touch-up marker, denatured alcohol and wax. First, degrease the surface with a weak solution detergent for dishes. When the moisture dries, the swab is moistened with alcohol and rubbed over the stains. If the scratch is deep, the varnish will not regain its color. In this case, a marker is used. To add shine, the surface is waxed and rubbed with a rag.
If small scratches form irregularities, it is better to clean them with a nail file. It allows you to do the job more delicately compared to sandpaper.
When the wood swells from moisture that has got on it, you need to mix salt with olive oil and rub the problem area. Leave the mixture on the damaged area for half an hour. Salt absorbs moisture and olive leaves elasticity to the fibers. After drying, the gruel is removed, covered with wax and rubbed with polish.
If furniture with chips is to be restored, use wood putty. It is better to pick up the color on the spot by buying a light product and adding color to it. The place of the chip and the adjacent surface are smeared. When the putty is dry, sand it with fine-grained sandpaper.

It is allowed to refresh the polish on old furniture using the following mixtures:

2 parts turpentine, 2 parts linseed oil, 1 part of vinegar is mixed and applied with a swab on defects or scuffs.
Mix 25 parts of turpentine, 15 parts of alcohol, 1 part of 10% soap solution, 5 parts of drying oil, 4 parts of shellac and 45 parts of water. Use the product cold. It is best to apply the mixture with a flannel cloth.

Significant damage to varnish

When the furniture has significant damage, the question arises of how to remove the old varnish from wooden surface... The reasons can be:

cracking of the coating;
a large number of small damages that spoil the appearance;
deep cracks, etc.

To remove old varnish from furniture, use special chemicals or remove the coating mechanically.

The first option is preferable because it removes varnish without damaging the wood. Mechanical stress is used in cases where deep chips and cracks form on the surface.

After removing the old varnish and restoration work, the furniture must be re-coated with a layer of protective agent. It should be chosen correctly so as not to spoil the appearance of the tree.

The following materials are used to restore the paintwork:

shellac varnish;
nitrocellulose varnish;
pentaphthalic varnish.

The first material allows you to emphasize the texture of the wood, it gives an original shade to the surface. It is similar in consistency to water. For restoration, 40-60 layers are applied to the tree. This allows for exceptional color depth.

Nitrocellulose varnish is used for the restoration of large surfaces. It is applied using a special sprayer that distributes the product evenly over the surface at high speed. Otherwise, each drop will freeze separately. Application with simple sprayers will result in air bubbles.

To cover furniture with pentaphthalic varnish, you do not need to have special tools or follow special techniques. This makes this product optimal for home use. The minimum number of layers is four. To obtain a semi-matte surface, use a tampon. A glossy effect is achieved with a brush and a finishing sanding.

Choosing a wash

An inexperienced user may be faced with the question of how to remove the varnish of old furniture. To completely remove the varnish coat, use a remover. It is a special chemical composition, designed to soften and remove paint and varnish.

When choosing, you need to pay attention to the consistency of the wash. When planning to clean horizontal surfaces, use a liquid product. To remove varnish from vertical parts, choose a gel or paste remover. If you are cleaning a large area, it is worth taking a powdery product, since it will last longer.

Washing technology

To remove old varnish from furniture at home, you need tools and materials:

remover;
brush;
latex gloves;
putty knife;
film.

Work should be carried out outdoors using personal protective equipment. Chemical agent evenly applied with a brush over the entire surface. Special attention should be paid to deep places of damage. The furniture is then wrapped with plastic wrap to enhance the effect. Withstand the time indicated on the package, remove the film and use a mild spatula to remove the old layer of varnish.

At the end, the residues of the wash and varnish are removed with water. If necessary, after drying the surface, proceed to mechanical cleaning using sandpaper. After rough processing, the furniture is sanded with fine-grained paper to remove all irregularities.

The procedure for applying a new paintwork

Not everyone knows how to varnish furniture. First, the surface should be primed to close the micropores in the wood. This will help reduce varnish consumption. You can prime it with liquid wax or special products. The following compositions are also used:

beeswax dissolved in turpentine;
a mixture of wood powder and PVA glue;
sifted chalk mixed with water with the addition of color.

The primer is applied with a brush, and when the material dries, it is sanded again. Then they start varnishing. This process is performed with a brush, the movements should be smooth in order to evenly distribute the varnish over the surface.

Since various means are used in the process of repairing and restoring the lacquer coating, depending on the type of the selected substance, the number of layers is required, which is indicated in the instructions. Each subsequent layer is applied only after the previous one has completely dried. In the end, you must definitely use polishing, you can use ready-made products or made yourself.

Restoration of varnish on furniture. Renew the furniture's antique lacquer finish. Restore old varnish, or cover furniture with varnish prepared according to old technologies.

The restoration workshop performs all types of polishing, finishing, color restoration, lacquer antique wood objects. Restores household items decorated with precious woods, marquetry, bone mosaics, mother-of-pearl, turtle.

To cover furniture with varnish means to protect an antique antique item from environmental influences: pollution, penetration into the natural tree moisture, harmful bacteria, fungal and insect spores. For a long time, coating furniture with wax, oil, or resin solutions in alcohol helped preserve expensive massive or veneered items of luxurious decoration of wealthy homes. In Russia, all varnishes were called varnishes. From the word OIL - oil. So the opinion came into use that ancient furniture was covered with oil or wax.

This is partly true for historical exhibits. Household antique chairs, stools, benches, wardrobes, chests of drawers protected, decorated, emphasizing the texture of the wood, luxurious antique varnishes.

The complex old recipes of antique finishes are not currently used. It is not possible to buy them. We ourselves compose polishes according to old recipes, thanks to which wooden things look natural, noble and expensive.

Restoration of lacquered furniture

In case of local restoration, it is possible to renew the lacquer coating of furniture or restore the old lacquer in several ways.

1. Modern glossy varnishes recover their gloss well when processed with thin polishing pastes. If the turbidity is superficial - a network of microscopic scratches, the defect is eliminated by polishing.

The abrasive polish removes the damaged layer to the bottom of the scratch, thereby restoring the original shine to the varnish.

2. White spots from water, alcohol, hot water are removed in a more complicated way. Here polishing alone is not enough. How to restore chrome plating at home?

The method of removal depends on the depth of the damage.

3. An antique object, on which ancient varnishes have lost their beauty, is restored by the method of regenerating varnish films.

The shellac coating is not sanded, but, on the contrary, is built up with a tampon soaked in polish.

With light circular movements, the restorer applies the thinnest layers of shellac layer by layer. The slightest inaccuracy, a delay in the movement of the tampon and the old varnish coating, will collapse from alcohol vapors, turn into a cloudy spot. Restorers call this phenomenon burn-through.

To restore the old varnish with varnish requires skill, great experience, skill, polished over the years.

Cover old furniture with varnish

Antique varnishes require skill from the restorer, precise adherence to the recipe and application technology. It is a great art to qualitatively cover old furniture with varnish. You don’t need expensive modern equipment, some rare restoration materials. For new things, any wood coating is suitable. The names are different: oil, yacht, acrylic, water.

The furniture coating will be durable and homogeneous. How to restore chrome plating on plastic? An antique item already has an antique lacquer on it.

To update which, it is allowed only with the composition with which it was originally trimmed. Otherwise, the layers either do not join together, or enter into a chemical reaction and collapse.

Thus, if oil varnish was used to finish the cabinet, sideboard, chest, then the restoration should also be carried out with the same composition. Polyurethane is restored with polyurethane, acrylic - with acrylic. Only shellac lays down equally well and adheres to all previous coatings.

Restoration of old, antique, historical lacquered furniture in our workshop is carried out with strict adherence to recipes and technologies. With a well-functioning production, it is not difficult to follow the technology.

Periodically rubbing surface table, cabinet front, mirror carving with special care products that allow you to update the lacquer coating of furniture at home, you can postpone the restoration of wooden sideboards, tables, sofas, armchairs for years. Along with changing the varnish, you can change the color of the furniture or give it the desired shade.

Paint furniture price

Just to cover the furniture with varnish - the price is not high. Table top - 5-10 thousand rubles, table 10-15 thousand rubles. Wardrobe or sideboard from 20 to 30. The difficulty is that the finishing of old lacquered furniture with varnish includes its preliminary, sometimes rather complicated restoration. Solid wood gluing, laying, veneer repair, cleaning, color restoration.

The table below shows the approximate prices for some types of restoration work. If you are interested in the price of restoration of a certain antique item, send a photo with a question to our mail or fill out the form. I will definitely answer.

Additional Information:

Over the years, once pleasing to the eye wood polished furniture tarnishes, is overgrown with scratches, chips and is already far from its original state. Is it possible to restore the original juicy appearance of things dear to us? How, and most importantly, what needs to be done for this?

When choosing a varnish, you need to focus on experience and personal preference. For a children's environment, you can use water-based varnishes: they do not smell and do not cause allergies. However, when dry, water-based coatings acquire a matte hue, which not everyone likes.

For those who have not done varnishing before, experts recommend alkyd compounds, since they are inexpensive, easily lay on wood, and, if necessary, just as easily washed off.

In order to secure all the surfaces to be treated, wedges, rope devices, and clamps will definitely come in handy. To securely fix the restored elements, you should install a vise for cutting and cutting metal, as well as purchase metal hammers and metal shears.

However, the matter is often not limited to only small scratches. Any varnish can darken over time. Therefore, long-term use of furniture leads to the fact that its varnished coating begins to grow cloudy.

As a result, interior items lose their presentable appearance.

The first way to restore the lacquer coating - regeneration, was proposed in 1863 by Professor Pettenkofer. How to restore the chrome plating in the headlight? The essence of this method is that alcohol vapor, penetrating into the smallest cracks of the old varnish, softens it and transforms it into a single film, restoring its transparency.

If the varnish of the damaged area of \u200b\u200bthe product does not contain deep cracks and bubbles, it is necessary to wipe the surface with a cloth soaked in gasoline until the grease stains are removed. Allow the product to dry, and then treat the surface with conditioner, and then wipe with furniture polish. Walk on a dry surface with a 4/0 metal sponge to wipe off the top thin layer of varnish (a rough surface will create a condition for good adhesion of the wood with the new varnish).
Necessarily: you cannot cut through the varnish!
Remove dust after brushing with a dry cloth and apply several thin layers of varnish similar to the previous one (or polyurethane, shellac or polish - depending on what the restoration object was covered with). Allow the product to dry.