Independent production of interior doors. Carpentry lessons. How to make the door yourself? Step-by-step instructions How to make a new one out of an old door with your own hands: options, photos, tips

So how to make an interior door yourselfwithout using any ultra-modern technologies and unique machines? It's actually quite simple. Naturally, you cannot do without a certain skill of working with certain tools. You should not be afraid of failure, especially if the case is happening for the first time, since the next time you can take into account all the mistakes. With the help of the first made door, you can get the necessary knowledge, but the subsequent ones lead to the accumulation of experience.

Then it is necessary to mark the places for the handle, the same applies to the lock, if it will be installed in the door. The markings are made in accordance with the door frame. The middle transverse board should be located exactly at this door height. After that, the workpiece is leveled, while not forgetting about right angles, and the markings of the joints of the boards and their location on the fiberboard are performed. On the extreme transverse boards, several marks need to be applied, which must be drilled in the future.

After removal, you can proceed to filing the edges for the spikes, which should be simple, half a board. At this stage, you need to be especially careful. It is very important not to cut too much. After filing the edges, you need to reassemble the structure and make sure that there are no protrusions in the joints.

Next, long boards are glued to fiberboard using any wood glue, while the edges should be aligned. In addition, the glue must be applied to the spikes. After that, all parts are installed in their places. Self-tapping screws with a length of two and a half centimeters should be installed in the finished holes, which are tightened only after checking the accuracy of the corners, while overtightening and leaving protruding hats should be avoided. Then, a thick layer of glue is applied to the frame made and the second prepared fiberboard blank is laid with all corners and edges aligned.

This entire structure must dry completely under load. After three days, it will already be possible to complete decorative trim self-made door. If this task seems too simple, or you just want to have in the house unusual doorsthen one might ask how to do it yourself sliding doors , which will also save a little space, which is not so rich in most apartments.

Most often, interior doors are bought ready-made in the store. But you can do them yourself, starting from a selection of material and ending self-installation... And in this case, you will be sure that the doors turned out the way you wanted.

The main task of doors between rooms is to isolate the room from extraneous noise, aromas and looks. According to their designs, these doors are divided into two types:

Paneled - they differ from panel doors by the presence of a frame in which there is a panel with glass. A panel is the part that is highlighted by frames, as well as a closable frame, plastic or plywood.
Panel doors - these doors are lightweight and at the same time well isolate sound. It is very difficult to make panel-type doors with your own hands; a video with a master class will not help much here. She has a very complex structure, it consists of a smooth shield, which can be further revetted with plywood. The main advantage of this type of construction is good quality with affordable price... These doors can even be installed in the bathroom.

Door cover

The coatings are different:

Veneering is the gluing of a thin layer of wood film onto the door leaf. The thickness of this film is from 1 mm. The bottom of the veneer is usually a backing, and the top is varnished.
Lamination is the application of a film to the base by pressing, the film is either paper or plastic.
Painting - paint the door in several layers, after that it can serve you for many years. How much depends on whether the paint is of high quality, and on the care of the structure.
Toning is the coating of a surface with varnish. You can use transparent varnish and translucent. This method very well conveys the structure of wood. As a rule, doors that consist of hard wood are tinted; if soft wood is tinted, the slightest irregularities and scratches will be noticeable.

Door types

Doors have several varieties:

Swinging is perhaps the most famous type that is installed in houses. They are opened to one side. They are divided into single and double leaf. There are also one and a half doors - this is when two door leaves have different widths. If the door opens to the left, then they are called left, if on the contrary, then right. If the room is small, then it is better not to install such doors, because in order to open them, you need free space.
Pendulum structures are structures that can be opened in both directions. They are not often used because they require a lot of space to open.
Compartment doors - open by sliding the door along the rails or inside the wall. Such doors are used if free space is limited in the room.
Folding - these doors fold when opened. They are virtually silent due to the presence of bearings in the rollers.
Stables are a view swing structures... Previously, they stood exclusively in the stable, which is why they were named so. Such doors are popular in the western part of the USA. In apartments, stable doors are used as protection from children.

Interior door material

A few decades ago, doors were mainly created with wood. Today, the industry provides a large selection of materials; it is possible to choose interior doors from the photo in the catalog. The main materials are:

Making a door

Making a door with your own hands is a difficult process, but possible. There are doors that are quite difficult to manufacture. And having already learned how to do them, you can move on to more complex ones. To work you will need:

tape measure and chisel, glue;
hacksaw and screwdriver, self-tapping screws;
sandpaper;
for a box of a board or a bar, and for a frame of a rail or a bar;
fittings.

To make a door, no special room is required; it can be made in any room. Work order:

Installation of an interior door

Installation of an interior door consists of several stages:

The most important point in door installation is the installation of the uprights. If the box becomes uneven, then the door can only be opened from the foot. Therefore, when mounting the racks, be sure to use a level.
Next, you need to install the door hinges.
Insert the door frame into the opening and secure with a spacer and wedges. Check it with a level and secure with self-tapping screws.
Hang the door on the hinges. Check how it opens and closes. If something interferes, then eliminate the defects.
The gap that has formed between the wall and the box must be foamed, while leaving the door closed so that the box does not blow out. When the foam hardens well, remove the spacers.
Install platbands on the door.
Install all fittings: door handle and lock.

That's all the work on creating and installing an interior door with your own hands. As the saying goes: "the eyes are afraid, but the hands are doing."

The interior door occupies an important place in the interior of the room. It serves not only as an obstacle to noise, delimits space and allows privacy, but is also a noticeable decor item.

There are several reasons that may motivate you to decorate the interior door:

First, despite the huge selection of ready-made (and very attractive) doors, it is sometimes very difficult to find suitable model... Sometimes all the doors seem to be the same - "I've already seen this one at the neighbors'", "and this one looks like the door to our office." You don't want to repeat yourself and acquire something unoriginal and has become banal, because your interior is unique, so the door must match.
Secondly, even an old door with scratches, peeling paint and stains that cannot be removed is not known from what you often do not want to change! After all, any replacement of the door is also the replacement of the box itself, which is associated with dust, plaster, sealing the resulting cracks, the need to change the wallpaper (at least around new door) - in general, with local and sometimes overhaul.

That is why sometimes it is much easier for the owner to update already installed door “On the spot,” that is, without changing the whole box, right here in the room. Of course, in some cases you will still have to remove the door from the hinges, but this is much easier and faster than starting a full-fledged repair. Whatever the reasons that prompted you to start decorating the interior door, we will say right away that often you do not need practically anything for this, except the materials left over from the last repair.

And one should not think that real craftsmen and needlewomen will be able to cope with such a task - even a person who has never held a hammer or a brush in his hands can embody some of the ideas proposed in this article. And the result of your work in any case will be original, unusual and will become a source of pride - “here it is, our door, I made it myself (well, at least decorated it)”.

So, we offer you 14 ideas for decorating an interior door that you might want to bring to life by decorating your interior.

The first idea. We paint, just paint

The easiest way, without frills and unnecessary work, to put the door in order. To do this, you will first need to remove the door from the hinges, then walk along it with a spatula, removing the old paint, level the surface with sandpaper, seal cracks and scratches with putty, remove greasy spots, seal the glass with masking tape so as not to stain, and you can take it in hand roller or brush! It is better to choose acrylic paint - it dries faster, and painting the door in a horizontal position - so the paint will not drain and will lay down more evenly. However, if it is convenient for you to do all of the above on a vertically standing door, you can not remove it from its hinges. Just remember to put something on the floor while painting so as not to stain the linoleum or laminate flooring.

White, plain painted door. Renewing it or repainting it in a different color will not be difficult, although moldings and carvings need special, careful handling during sanding and removing the layer old paint

Second idea. We paint in several colors

The option is more complicated, although it is also associated with staining. In this case, we do not just paint the door in one color, but create a simple or complex geometric pattern from stripes, squares, rhombuses, and so on. The door must first be prepared, as in the first case - that is, cleaned of old paint and level the surface. However, in this case, we will need much more masking tape - it is with its help that you delimit the zones between stripes or rectangles. Also, so as not to buy multiple cans of paint different color, you can buy white paint (one liter is enough for the door), as well as several dyes, with which you can experiment with shades.

Gold and white, blue and soft pink, bright stripes on a neutral background, rhombuses and winding lines - a variety of patterns can appear on the canvas of your door and color combinations

When choosing a geometric pattern, remember that a wide strip along the entire door leaf is more suitable for the country style, and for the classics it is better to choose other options, for example, paint the upper part of the door in a lighter shade and divide the parts with a horizontal strip

Third idea. Select moldings

Also painting the door, which in general is not too different from the first option. However, in this case, we will focus on the moldings, painting them in a contrasting color. White and black are a great combination, but already well-worn, so think about which colors would work best together. Designers have long recognized white and green, blue and yellow, red and dark blue as an excellent option. Such a door will look great both in a bohemian boudoir and in a strict classic living room.

The white door with highlighted black moldings is a real classic. By the way, if your door does not have such decorations, it is easy to make them yourself - special wooden thin strips are sold, which are simply nailed to the canvas

An unexpectedly bright, pink door that looks particularly aristocratic and attractive thanks to the white frames

The fourth idea. We paint according to the finished stencil

A very convenient and easy way to turn your door into a work of art, even if you do not have the talent of an artist. Ready-made stencils can be purchased in construction and specialized stores, or ordered on one of the sites, and the choice of drawings and patterns is very large. Then we just apply the stencil to the already prepared door and paint. Easy, fast and the result is very beautiful!

It is as easy as shelling pears to apply a drawing using a ready-made stencil, and the choice will allow you to choose an original inscription, an exotic pattern, and an unusual picture

Such a deliberately simple drawing can be easily created without stencils. It was the uneven lines and simplicity that became its main highlight.

Fifth idea. Art painting

Unlike all of the already listed options for decorating a door, this option is not for everyone. To create a real masterpiece on an ordinary door, you will need an artist's talent and certain skills in working with brushes, since a roller is no longer enough here. Imagine that your door is a blank white canvas on which, thanks to your skill, will appear beautiful landscape, a cheerful painting or an exquisite pattern. Thin hand-painted painting always looks expensive and stylish, and you can achieve this effect by spending money only on buying paints.

Many European companies offer ready-made interior doors with artistic painting. They are, of course, not cheap, so you can try to create something similar with your own hands. Are you afraid it won't work? You can always just paint over a bad drawing!

Sixth idea. Children's creativity

Does your kid love to paint? Give him such an opportunity - let him decorate the door to the children's room. Yes, such a naive, bright drawing would be out of place in a strict living room, but as a decoration for a children's room it is a great option. Just agree with the young artist that the second half of the door is already your field for the embodiment of fantasies!

Usually, children's paints can be washed off very easily, so your aspiring artist can paint the door again every day. But you will have to pre-prepare the canvas, putting the door in order.

The seventh idea. Unusual texture with paint

If you think that just applying paint is boring, and you are afraid to take up hand painting, you can try to achieve an unusual texture, for example, the effect of a wooden surface or an antique door using a very simple fixtures... So, using a sponge, you can get a spotty surface, steel wool will help to achieve the effect of an old door, a hard brush - to create an expressive surface of denim. Special ready-made paints are also on sale, perfectly imitating jeans, wood, canvas, velvet or slate board.

On such a door, painted to resemble a slate board, it is convenient to leave messages to household members

Eighth idea. Wallpaper

If all the previous ideas concerned only working with paints and brushes, then this method is suitable for those who do not want to mess with paint. Wall murals will instantly transform appearance your interior door, turning it into a striking design element. Of course, it is best to purchase wallpaper designed specifically for doors - in this case, your drawing will definitely look complete. Ready-made wall murals usually have a standard size of 86x220 centimeters, therefore they are suitable only for standard doors, and without moldings and glass inserts. However, now many online stores offer custom-made door wallpaper, so you can choose the option that is ideal for your door, with any pattern. You can trim doors and regular wall murals to fit, but this may make the drawing look unfinished.

How do you like this unusual option - a door that has been turned into a telephone booth with the help of photo wallpaper?

Before gluing the wallpaper, the door must be cleaned of stains, and the surface must be leveled, sanded and degreased with a solvent. You can use regular wallpaper glue, but PVA is much more reliable. The disadvantages of this option for decorating the door include the fact that a bright image will immediately catch the eye, so it can quickly get bored. In addition, photowall-paper on the door, due to frequent touches, will lose its original attractiveness. However, no one will prevent you from changing the photo wallpaper on the door to something more original in a couple of months.

Photo wallpapers with picturesque landscapes are especially popular.

Photo wallpaper on the door will help to make small room visually more. And it is very easy to stick them on, for this you don't even need to remove the door from its hinges

The ninth idea. Regular wallpaper

Previously, this decor was very popular, but now many designers consider it bad manners. This does not prevent the usual wallpaper, "migrated" to the door, to remain a popular way of decorating the interior. Stick paper and vinyl wallpapers on the door is especially loved in Sweden, USA and Canada. By the way, there is no need to hide the entire door behind the wallpaper - on the contrary, the wallpaper, divided into clear "compartments" thanks to moldings, looks especially interesting. The remaining surfaces of the door can be simply painted by choosing a shade that matches the color of the wallpaper. Alternatively, you can buy cork wallpaper and varnish it on top for reliability. Their unusual texture will make the door more original.

Preparing the door is exactly the same as in the case of using photo wallpaper. The main advantage is low cost, since you can use wallpaper left over from the previous repair, and ease of decoration. The main drawback is quick wear - wallpaper can peel off and tear at the joints.

Wallpaper glued not on the entire door, but on the parts highlighted by moldings, look more impressive

The door, covered with the same wallpaper as the walls, will literally merge with the interior. On the reverse side, the door, of course, is pasted over with other wallpaper so as not to stand out against the background of the wall of another room

Idea ten. Fabric instead of wallpaper

This option will look especially cute and home-like. The door decorated with fabric looks original, the choice of fabrics today is surprisingly wide, but this method also has its drawbacks.

If you choose a single piece of fabric to decorate the door, you should take care of the original drawing

First, when choosing a fabric, you should make sure that the glue will not stain it. Secondly, the edges of the fabric must be pre-processed, otherwise the protruding threads will not look very aesthetically pleasing. Thirdly, doors decorated with fabric are not suitable for every style of interior design. Those who are fond of patchwork, that is, creating canvases from different pieces of fabric, can turn their door into a real applique made of bright patches. By the way, if there is room for a glass insert on the door, you can hang a small curtain here, fixing it on a fishing line and small nails.

Very nice door, decorated with patchwork technology. The trouble is that to classic style the interior, such bright patches have not the slightest relation, this is an option, rather, for the "rustic" and colorful country

Eleventh idea. Posters, cards, paper

An option for creative people and a great idea for a teen's room. The door can be decorated with a poster and a picture of your favorite artist or band, sheets from an old geographic atlas or sheet music. Sticking on such paper sheets and posters is as easy as using regular wallpaper.

An old geographic map will be appropriate even on the interior door of an ordinary living room, but it is better to "settle" posters in a teenager's room

Idea twelfth. All kinds of stickers

This simple and not too expensive way of door decoration is becoming more and more popular today. Vinyl stickers can be purchased in online stores, the cost of a model of the size of a standard door starts at 2.5 thousand rubles, they are glued very easily, and will last longer than ordinary photo wallpapers.

Stickers with such funny and at the same time useful inscriptions will not only decorate the doors, but also cheer up the guests

If you do not want to hide the entire door behind the stickers, it is quite possible to purchase small images - a butterfly, bright flower etc. They are cheaper, and the outer appearance of the door will be completely transformed. Also popular are "informative" stickers, for example, on the door of an office, bathroom or toilet, which will inform guests what is hidden behind this door.

The elegant lady on this sticker will immediately inform the guests of the house that the bathroom is hidden behind this door.

Often, stickers can look like ordinary photo wallpaper, and sometimes like hand-painted on a white door or a child's drawing.

Thirteenth idea. Decoupage

The technology of scrupulous cutting out of the vending images from paper and further composing applications from these pieces allows you to transform not only a casket or a photo album cover, but also an ordinary door. Everything that a novice master of the ancient art of decoupage will need: paper drawings, napkins with a pattern you like, postcards and the like - everything from which you can cut a picture, a brush, PVA glue, scissors, glitter, acrylic varnish, contour and acrylic paint.

In the decoupage process, you can use literally anything - from scraps of old newspapers to greeting cards.

IN short description the process looks like this: apply a layer of white acrylic paint to the door surface, wait for it to dry, then another layer - and wait again until it is completely dry. Then we apply a layer of paint of the selected shade, and then we attach the cut paper drawings with PVA glue. At the same time, we try to glue the piece as evenly as possible, without folds and expel all air bubbles. With the help of glitter and contour, we can draw dots, stripes and others small parts... Then cover the finished painting with a layer of varnish. That's all. The rest is your imagination and beautifully selected drawings.

The decoupage technique allows you to create amazingly beautiful paintings, and varnish coating will extend the life of the decor

Idea fourteen. Mosaic

A door decorated with bright mosaic will be an excellent option for a bathroom; you can also decorate a metal front door... Moreover, it is not at all necessary to use pieces of ceramic for these purposes - in this case, the door may turn out to be too heavy. A mosaic can be created from pieces of wood or veneer, or purchased ready-made made of glass.

In this case, bright glass mosaic takes up most of the door, making it very unusual and cheerful.

The mosaic is fastened with special glue ("Moment" or liquid nails will do) on the prepared and cleaned surface. It is worth considering in advance all the details of the pattern by drawing a diagram of the arrangement of the pieces with a pencil. By the way, you can decorate with a mosaic not only the door itself, but also the box, highlighting the slopes using the selected pattern.

Creating a mosaic pattern is a huge scope for creativity. And if some part does fall, you can always attach it back

An old door can become a real art object, just a little imagination and effort. To begin with, you can use one of the simplest ideas, and then, having got a taste, try yourself in the art of decoupage or painting. In any case, your door will definitely be one of a kind!

If you are wondering: how to make interior doors yourself? Either you are an incorrigible needleworker, not thinking of life without making something, or your design ideas are so grandiose and enchanting that you could not choose the right one among the thousands of ready-made door models. In either case, it is worthwhile to soberly assess your capabilities, have experience with wood and carpentry tools, be prepared for the fact that the door drawn in the sketch in nature will be strikingly different from the drawing.

In the XXI century self-production doors - exotic, akin to weaving bast shoes or baskets from willow twigs. But as long as there are people who still remember how this is done, then there is a need for their skills.

Types of interior doors

Do not overestimate your potential and start manufacturing paneled doors if you do not have access to professional carpentry equipment. Hand or electric saws, jigsaws, drills and grinders cannot achieve the required precision in manufacturing parts.

It is easier to make an interior panel door. The manufactured door leaf can be equally suitable for swing doors, and for different options sliding. At the same time, you will absolutely not be tied to the existing size standards in housing construction and you can make doors under any doorway, and any of the most intricate shapes. At least like a hobbit in a hole - round.

When you have decided on the concept of the future door, you need to measure the doorway in which your masterpiece will be installed.

Required material

To do panel doors from the most various materials: wood, plywood, fiberboard, plastic panels, drywall. Moreover, they can be both frame and frameless.

A bar of not the highest quality can be used as a frame, the only requirement is that it be dry and not have visible curvatures along the length and twisting along the axis. Can be used as a filler between the facing layers mineral insulation or expanded polystyrene, according to SanPiN requirements, suitable for use in residential premises.

If you want to make a panel frameless interior door, then you will need to calculate required amount lumber by area door leaf and translate the resulting value into cubic meters, since in most stores lumber is sold in cubic meters. It is not difficult to do this yourself.

With a standard size of an interior door 800x2000 mm, its area is 1600000 mm². The standard thickness according to GOST is 40 mm. We multiply 16,000,000 x 40 \u003d 640,000,000 mm³. And since 1 m³ contains 1 billion millimeters, we divide the resulting value 640,000 00: 1,000,000,000 \u003d 0.064 m³.

Similarly, you can calculate the need for the filler.

Required tool

To work, you will need a fairly large number of various tools. It is advisable that you have:

Circular saw (an option is a jigsaw, although you will never get a straight saw for it).
Electric drill (option - a screwdriver, powerful enough to drill holes and use feather drills on wood).
Electric sander - if you plan to make a glued panel door from solid wood.
Hand saw on wood.
A set of chisels.
A set of feather drills for wood.
Screwdriver with replaceable bits.
Clamps (4-6 pcs.).
A hammer.
Mallet.

A plane with a piece of iron not less than 40 mm wide.
Rubber spatula.
Painting brushes of various widths.
Polyurethane foam gun.
Sealant gun (acrylic).
Measuring tools: level, tape measure, locksmith's or joiner's corner, metal ruler 1000 mm.
Consumables: screws, nails, anchors, plastic and wooden dowels.

Manufacturing of frame panel doors

A frame panel door implies the presence of a frame made of wood, which has a contour along the perimeter of the door and several transverse elements connecting the long sides of the door in order to give rigidity to the structure and the possibility of installing fittings. Usually, one additional element is located at the level of the future door handle.

Initially, two identical canvases are cut from plywood (laminate, fiberboard, MDF) exactly to the size of the door. Then two long and three to four short blanks are cut out of a bar or board. When cutting out workpieces, one should strive for the most accurate observance of the 90 ° angle for the transverse elements, since they must fit snugly along the entire width of the workpiece to the vertical elements without forming a gap. This will affect the geometry of the door and its strength.

The simplest is the glue connection on furniture spikes (wooden). To do this, 2-3-4 holes (depending on the width) are drilled from the end of a short (transverse workpiece) with a depth of ½ the length of the thorn, greased with carpentry glue and hammered with a hammer until they are fully seated in the hole.

Similarly, holes are drilled on the inside of long blanks, at the level of which the horizontal parts of the frame will be located. To be 100% sure that the holes match, the drilling of all holes is carried out according to a pre-made stencil: which can be made from aluminum corner with a shelf of 40 mm. or any thin sheet metal.

After installing the spikes on both sides into short (transverse parts), they are laid out on a flat surface, the protruding spikes and ends of the parts are lubricated with glue and a long part is applied to them so that the spikes enter drilled holes... With a mallet, a long part is knocked evenly along its entire length until the spikes are completely immersed in it. The second long piece is glued in the same way. After that, it is necessary to pull long parts together with long clamps or a device for tightening the floor laminate with the maximum possible force.

When gluing, it is not the amount of glue that is important, but the compressive strength of the parts to be glued!

After the glue dries, first the lower panel of the casing is glued, then the filler is placed in the voids and is also fixed with glue and the assembly is completed by gluing the top sheet. Immediately after this, it is necessary to ensure a tight pressure of the panels to be glued by placing a load on the door or tightening with clamps through the inserted transverse boards at the bottom and top.

When the glue dries, the canvas is cleaned with emery paper from glue drips, the irregularities along the edges of the workpieces are polished, if necessary, they are primed around the perimeter, rubbing the existing cracks and irregularities using rubber spatula... After drying, the primer is again treated with fine sandpaper and wiped with a damp cloth to remove dust.

The canvas is ready for further finishing with the selected material or for painting.

Assembling a frameless solid wood door

For such doors, lumber of the required thickness is selected and preferably even in texture, without a large number of knots and defects on the surface. If possible, calibrate in thickness (the discrepancy is not more than 1 mm.). A sheet of plywood or other material acts as a base. It is used to lay out sawn timber along the length of the sheet so that it evenly covers the entire surface of the sheet.

The sheet on which the layout was made is smeared over the entire area with carpentry glue and the selected lumber blanks are laid tightly on it, while the end faces adjacent to each other are smeared with glue. After all the blanks have been fully laid out, they must be tightened with clamps or a screed for floor boards (laminate) and placed on top of the load or, also, through the boards placed across the door, tighten them with short clamps.

After the glue dries, the door is processed with a plane along the long side - the excess lumber is removed to the required width, then it is sanded with a grinder to completely equalize possible differences in the thickness of the lumber blanks.

So it turns out a door on one side with a base, and on the other side - wooden surface solid wood that can be preserved in its natural form or also covered with any decorative material.

Doors from plastic panels

The manufacture of such doors is advisable for rooms with high humidity (baths, toilets, vegetable pantries and balcony cabinets, etc.)

In essence, these are the same frame panel doors, the difference is that the assembled frame should be smaller door frame 15-20 mm. This is necessary so that after assembling the covering, consisting of plastic panels, it is possible to sheathe the door along the perimeter of a thin wooden lath, which will cover the honeycomb structure of the plastic panels at the ends.

Before starting the installation of plastic panels, it is necessary to treat the frame with solutions that prevent the development of mold and preferably soak it with hot drying oil.

After mounting the panels and nailing along the perimeter of the rail. Such doors do not need additional finishing or painting. It will only be necessary to varnish the rail or paint it to match the color of the plastic panels.

Let's sum up

Homemade interior doors are more of a whim than a necessity. Those rare cases when it is impossible to pick up a ready-made version in the store, or order the manufacture of doors according to individual sizes for professionals - a reason to change the design concept of a room rather than undertake such laborious work with an unpredictable result.

Sections of the article:

The intrigues that Queen Margot wove, Harry Potter with his secret room - what is all this associated with? And this is associated with secrets, secret rooms, into which no less secret door should lead. Secret corridors in ancient castles and secret doors hidden from everyone have always existed. Why are there doors or rooms - history knows about the existence of secret cities. Lovers of secrets exist today, so let's talk about secret hidden doors.

The design of the secret door should be completely and completely invisible. It literally merges with the wall decoration. This solution is ideal for all types of interiors and can be a great addition to them. Such designs can often be found in apartments or houses - modern people also have something to hide. To equip such a door, you can use the services of various companies, or you can make it yourself.

There are many options for arranging secret passages. For example, you can hide the opening in the wall by finishing the door leaf with the same material that was used to decorate the walls. You can also make a secret door in the closet or in the form of a mirror.

Why is this needed?

Why do people create hidden rooms in their apartments? There are a lot of options. For example, it could be a weapon storage room. According to the requirements, it should be stored in such a way as to ensure its maximum safety when entering the apartment or house by third parties.

Also, a secret door can hide safes. Often, special places are provided for them. But quite often people hide it behind doors that are inaccessible to outsiders.

Even in hidden rooms, you can store valuables, for example, a collection of paintings or jewelry. Also, these solutions are used simply for storage, then an additional pantry never hurts.

Sometimes a hidden door is installed not in order to hide something, but according to the idea of \u200b\u200bthe designers. It can look very impressive - invisible doors are very popular today.

Types of finished structures

The problem is that there really are no ready-made structures. There are just specialized firms that manufacture and install a secret door. The fact is, in each specific situation you need something individual.

Doors for painting are especially popular today. They do not have traditional handles, but they open from a push, or by pressing a special lever. It is located in an unknown place. This type of structure has one advantage - they can be easily hidden in a wall with any finish.

If there are voids in the house or apartment, then it is best if the secret door is a sliding door hidden in the wall. Very often, such solutions are chosen when at the same time it is necessary to create a secret room and there is practically no free space... These doors are opened manually or with the help of automatic systems.

Many people hide hidden doors in wardrobes. This is done in order to hide the passage from anyone who might be interested in it.

DIY making

If there are only "invisible doors" on sale and you can't just buy a real secret door, then you can always make it. These products do not have any complex designs. The whole process does not require much effort or expense.

In order for the result to be good, you must adhere to certain requirements. The door frame must necessarily be hidden or disguised - sometimes you can hide it by plasterboard sheathing. Hinges should also be of a hidden type. If this sliding systemthen it must also be hidden.

Experts do not recommend using standard options door handles and locks. The plinth is fixed to the bottom of the canvas. If the canvas will be disguised as one of the walls, then it should be flush with the wall surface.

Masking the structure under the curtain

This is the most affordable and easiest option. Straight curtains or draperies both attract enough attention to themselves and effectively and effectively mask the passage.

Disguise under the wall

Today there are many options for how to make a secret door. For example, a popular method is to disguise the door leaf under the wall. If you correctly implement this option, then even the most observant people will not be able to notice any door.

The simplest, but effective method - this is the finish of the door leaf for wallpaper. To make the entrance as less noticeable as possible, you need to minimize the gap between the door and the wall. Also, don't forget about the skirting board.

An alternative way is simple painting... With this option, you can create unique effects. The wall can be painted with rectangles of different shades - the door will simply get lost among them.

The door between the tile joints is very effectively masked. You can apply not only tiles, but also decorative brick... The most important thing is that the door merges with the wall.

Using large mirrors

A great way to securely hide the door in the interior is to use a mirror cover. Mirrors on wardrobes, corridors and bedrooms look good.

It is quite simple to make such a door. It is necessary to fix the mirror sheet on the MDF-frame of the sheet. The frame is made of aluminum, at the top it is necessary to additionally fix the frame-handle. It will hide the seams and create the effect of framing a wall mirror.

We use the picture

Another option for making a secret door is to use paintings as a camouflage element. It is better to use samples of classical painting. This method partially resembles the solution with a mirror. The painting appears to be stationary, with its frame concealing the passage.

IN modern interiors you may not use classical painting - wallpaper or any photographs will do. The main thing is the frame and the large aspect ratio.

Secret doors can be made easier - just buy an invisible door without finishing in a hardware store and finish it to match the color of the wall in the apartment. This is often enough.