How to adjust the plastic rotary balcony door. Adjustment of the balcony door: general recommendations, elimination of displacements, repair of the seal and door handle. What to do for tight closure

A balcony door can be impeccable quality, but over time, active operation will lead to small errors in the work. If the door is still under warranty - excellent. And if not, you can do without a challenge of professional installers. Adjustment balcony doors Does not take much time and will work out on "excellent" if you do everything right. So how to adjust the balcony glass from PVC with your own hands? For you - detailed instructions, visual photos and useful videos.

Contracting input door fault

The better the plastic door, the better it is installed and the more reliable accessories, the longer the product lasts. However, the quality quality of the door can be taken in advance, which is much easier than to look for a defect or eliminate breakdown.

If when installing the master offers additional options, that is, it makes sense to figure out their meaning:

• microlift - useful device, indispensable in case of heavy installation plastic door with a two-chamber double glass. It is an extra support for heavy canvas in a closed state. It looks like a movable lever in the door of the door or a metal roller below;
• the limiter acts when opening the balcony door. It serves to prevent the shitting of the door canvase and to prevent the doors about the slopes. First, the limiter takes part of the load falling on the loop. Secondly, reduces the risk of breaking the door mechanism from constant shocks.

Attention! Due to the shrinkage of new buildings any interior doors can shift and even deform.

A malfunction, which occurred most often - the coach of the door leaf under its own weight. To prevent troubles, it is necessary to carefully examine the fittings that the installers offer you. A low-cost slipping mechanism is unlikely to endure a heavy door. Only fittings are suitable, designed for weight of 100-130 kg.

If you failed to apply prophylaxis, you can learn to several adjustment methods, because such knowledge will always be useful.

How to recognize a malfunction

You need to regulate the door as soon as you noticed the problem in her work, otherwise the problem will exacerbate.

Council. You can test the strength of the clamp using a simple sheet of paper. Open the door, attach sheet to the frame and close the sash. Pull the sheet out, commemorate the applied effort. Repeat the experiment every 50 cm. If in one or several places the paper is pulled easily, it means that the fit is broken.

Symptoms of "door diseases" are usually several species:

• door handle rushes when nailed. Such a breakdown is the most insignificant and instantly eliminated;
• deformed seal;
• the lower door hits the threshold. So the sash shifted under its own weight. Most often, such a "disease" occurs if there is a two-chamber glass glass with a glass of 6 mm thick (standard - 4 mm);
• the door handle turns with effort, or not to the end.
• cracked double glass. This may be a sign of displacement or deformation of the sash;
• the middle part of the door hurts the frame. It means that the side displacement occurred, which is easy to eliminate;
• the canvas does not protect against draft, because Poor pressed against the frame. This means that you need to make a clamp of the door and frame.

Check if the door is installed correctly, a simple pencil will help. Closing the sash, circle it with a pencil around the perimeter. Opening the door, you will see if there is a deviation of parallels. Even if the balcony door works flawlessly, such a displacement is a sign of a future malfunction.

Adjustment when sagging plastic door

Eliminating the difficulties of any specified type possible if there are following tools:

• flat and cross screwdriver;
• passatia;
• set of hex keys;
• plastic gaskets;
• roulette.

To eliminate savings, it is necessary to affect the sash, pull it up to the upper loop.

Attention! Some types of fittings are not designed for hexagon, but turn a key-star.

Stages of actions:

1. Operate the door into a swivel position.
2. Turn the screw near the top loop using the hex key (4 mm).
3. Close the door.
4. Get to the adjusting screw of the bottom loop, removing the plastic caps.
5. Rotate the screw clockwise, lifting the sash.

Check the effect. The sash must move freely, effortlessly. If the adjustment is insufficient, then you need to repeat the same actions.

Troubleshooting Handle

For adjustment door knob You need to perform a few simple actions.

1. Find a plastic cap located at the bottom of the door handle.
2. Rotate the cap on the half turn (90 °).
3. Screws located in the opening niche firmly tighten with a screwdriver.

If the problem is not eliminated, the cause of the malfunction in the other. Perhaps cracked the handle itself.

What to do if the middle of the frame hits the middle of the frame

If the sash is shifted to the side opposite to the hinges, then you need to pull it back. For this work you will need an adjustment key.

Step-by-step instruction:

1. Open the door.
2. Find the side adjustment screw located in the bottom corner under the loop.
3. Insert the key into the screw and turning it, attract the door closer to the loop.
4. If the fault is not completely eliminated, you can also do the same with the top screw.

This process usually takes no more than 15 minutes, after which the door will work properly.

Adjusting the clamping to eliminate drafts

If cold air enters the room, and the winter is close, then you need to quickly do this issue. Moreover, this repair does not require considerable effort.

Attention! In order to lower the door tightly down, the screw on the loop should be rotated to the right. If you need to raise the sash, then it is left.

Step-by-step instruction:

1. Close the sash and find three special eccentric on the end. These are small devices governing the pressure of the canvas. They are located at the bottom, in the middle and above.
2. Rotate each eccentric to the same angle in turn. Turning, checking how tightly the sash is pressed.
3. For one hundred percent sealing, tighten the screws on both door hinges.

In extreme cases, when the above actions do not help, you can "pull" tightly. To do this, they remove the strokes and are paved with plastic gaskets the top of the door and all the glass.

If you installed high-quality plastic doors on a balcony and made it right, they will be reliably serve for many years. The only problem with which you can meet in the process of their operation is possible imbalance in the work of the mechanisms. It is fixed with the help of adjusting accessories, such work can be performed with your own hands.

Can I independently adjust the plastic balcony door

Over time, any plastic door begins to see, because of which its dense fit does not ensure, heat and sound insulation characteristics deteriorate. This is due to the fact that the cloth is heavy and often exploited. Usually, adjusting the position of the door horizontally, vertical and its clamp can be performed independently.

Even the highest quality balcony door with time requires adjustment of fittings

In order for the service life without adjusting the structure, it is recommended to monitor the installation process, while paying attention to such indicators:

• the density of adjacent canvas to the door frame all over its perimeter;
• no displacement of the design vertical and horizontal;
• independent opening and closing of the door - it must be absent;
• the need for application effort during operation - the canvas should move easily.

You should not wait until the balcony door stops closing or open. When first troubleshooting, it is necessary to immediately perform the necessary adjustment to prevent more serious damage to the web, box or shut-off mechanisms.

To determine the place where the offset occurred, you can use a sheet of paper: it is placed on the frame and closed the cloth, after which it starts to move. At the site of the skew this will be difficult to do. Door adjustment density is determined using a conventional pencil or marker. On the sash spend a line, after which the doors are closed. If the line is shifted after opening, it means that there is an insufficient gap in this place and you need to adjust.

Required tool

To adjust the plastic door you will need the next set of tools:

What problems can be adjusted independently

Any house master It can eliminate with their own hands the following malfunctions of metal plastic doors:

• schedules of the canvas - this will indicate its hitch behind the threshold, such a malfunction is associated with a large weight of the door, which is shifted in the vertical direction;
• gap between door box and the web, which indicates a violation of the quality of the clamp of the door sash;
• bailing side part the door frame, this is due to the displacement of the canvas in the horizontal direction, which is caused by the features of operation or weather conditions;
• violation of the handle, there is a weakening of its attachment, which is why the mechanism ceases to work correctly;
• tight closing of the door is caused by a diagonal displacement, disruption of the operation of the locking mechanism or a strong clamp of the sash to the frame.

Poor closes a balcony plastic door

If the balcony plastic door began to close badly, then the cause of the handle may be the reason. During the operation of the door, this item is constantly rotated, which leads to the weakening of its fastening and deterioration of performance. In order to restore functionality, you must perform the following actions:

If such an adjustment did not bring the expected result, then most likely the case is damaged, so you need a replacement of the handle.

Successful balcony plastic door

If you find that during the closing of the balcony door, it hurts the threshold, then this means that the canvas causing and need its adjustment. It is easy to do this, just follow these steps:

How to adjust the density of pressed balcony doors

Detect disruption of the clamping of the door leaf to the frame in the inspection of the seal, the problem is evidenced by the deformation of the material.

You can perform adjustment in several ways, everything will depend on the design of the fittings used:

Adjustment of the loop of the balcony door

With the help of the loops on which the plastic balcony door is attached, can be adjusted to the web both in horizontal and vertical direction.

Horizontal adjustment is performed in the following sequence:

Vertical loop adjustment allows you to move door leaf Down or up.

One of the ways to troubleshoot is the adjustment of the double-glazed. This option is used in the case when other methods achieved the expected result did not work. It is more complicated, but in this case you can cope without the help of specialists:

Video: Adjustment of a plastic balcony door

Repair of a plastic balcony door

Before you begin repairing a balcony door, you need to decide on the type of malfunction. There are a number of problems, solve which are independently difficult enough, so you have to call the wizard. To serious breakdowns of plastic doors include:

• cracks in a double-blade, frame;
• violation of welds;
• destruction of fittings;
• looping.

Other repair work You can do it yourself.

How to make dismantling

If there was a need to dismantle the plastic door, it is necessary to prepare scrappers and pliers. The work sequence is as follows:

Removal of glass package

If you need to remove the glass, then it is more convenient to do after you dismantled the canvas. But another option is possible when the door remains in place. To do this, you will need a special vane, but if it is not, you can use a spatula or knife, rubber suction cups. Work is recommended to perform in gloves.

Sequence of work:

Replacing balcony doors

If you need to replace the balcony door, then all the work after dismantling will be performed in the reverse order:

Warming of balcony doors

If you purchased a high-quality plastic balcony door and installed it correctly, it does not need additional insulation. When the design is selected, it is recommended to give preference to the triple glass. In addition, pay attention to the profile from which the door is made. Optimal is the five-chamber option.

Such a question as the insulation of plastic doors is associated with the elimination of the secondary reasons for the cold entering the apartment:

• bad sealing between doorway and box;
• lack of insulation of slopes and threshold;
• violation of the position of the door canvase.

First, it is necessary to determine the cause of the penetration of cold air. To check the suggesting status, you can use a candle that will indicate a problem space. In the same way, the threshold and the door canvas are tested all over its perimeter.

Before insulation of slopes, it is necessary to check the quality of seaming of the seam between the door frame and the discovery. If it is bad, then part of the foam is cut off, after which the slot is again blown up with similar material.

For insulation of slopes, plastic, plasterboard or foam plastic can be used. If the first two materials are used, then first make a doom. It can be made of metal profile or wooden bars. After that laid a layer mineral wool And sew everything with plastic or plasterboard. Additionally, it may be necessary for the finish of the shta.

Plastic, drywall or foam can be used to finish slopes, but the last two options will have to put one more and paint

You can warm and foam. To do this, cut the pieces of the required size and with the help of special glue, they are mounted on the slopes. Polyfoam will also have to put off and paint.

A qualitatively installed and properly insulated balcony door will help raise the temperature in the room for several degrees.

Warm threshold can be polystyrene foam, which is mounted using a dowel, and then finish ceramic tiles. You can also use special plastic productsThat are sold along with the door, but often homemade craftsmen put the usual windowsill.

For insulation, the threshold uses sheets of polystyrene foam, which are then covered with tiles or plastic lining

Video: Disassembly and assembly of plastic balcony doors

Adjusting the plastic balcony door is not a challenge, so you can cope with it on your own. To do everything correctly, you must first determine the cause of the violation of the normal performance of the structure, and then study the sequence and technology of its elimination. It is enough to spend some time to deal with how to do everything right, and then you can adjust yourself.

If from the side of the balcony blows, or the door opens, closes badly, the problem is absolutely not necessarily as a door or unfair installation. Often the situation can be corrected by adjustment. How is the adjustment of the balcony plastic door?

If the warranty period has not yet come out, you can call the masters from your installer. Moreover, the installers were required to adjust the door at the end of the installation. But someday the warranty will end, and you still have to regulate the door yourself, if you do not want to spend your extra money. Doors are increasing much faster than the windows: they have more weight, they are open-closed more often.

Important: New houses during the first year give shrinkage. During this period, you need to follow the door. In the running version, the design may be deformed.

Qualitatively installed and adjusted door:

Tightly and evenly pressed all over the perimeter;

There are no visible distilts and deviations from the vertical;

Resistant B. open position (in the absence of wind).

Video "Adjustment of plastic balcony doors":

Condition status is checked using a paper sheet. The sheet is placed between the sash and the frame, lock the door, pull out the paper. It should be removed with some effort.

Remove the unevenness of the installation (the web is poorly combined with the frame) can be using simple pencil. You need to circle a locked door around the perimeter, open and see how much the line is parallel to the edge of the frame.

The adjustment of the plastic balcony door is also necessary if: the handle is poorly rotated, the seal is unevenly deformed. If he was deformed below, the door must be raised by adjusting the bottom loop, if at the top - to lower a little, adjusting the upper one.

Instruction

Required tool kit:

Keys and hexagons of different sizes;

Pliers;

Screwdrivers, slotted and cross;

Roulette.

There are three hinges on the door, in which there are adjusting screws. The adjustment of the plastic balcony door is made as follows:

1. Open the door, unscrew screws, fixing decorative lining, hexagon 3.

2. Close the door, remove the lining.

3. Under the lining there is a screw, located horizontally. With it, the door is adjusted horizontally. To raise the lower corner of the sash, you need to tighten the screws in two hinges, top and medium.

4. If there is a need to shift the canvas to the right / left completely, you need adjusting horizontal screws of all three loops.

5. To adjust the plastic balcony vertical vertical (lift / lower), screws are used in the lower parts of the loops and the hex key 5.2. The door is lowered by rotating the screw clockwise. In the opposite direction - rises.

6. Move the lower angle to the right / left can be tightening the same screw on the bottom loop.

7. To adjust the upper or lower response, use the hexagon 2.5.

8. The shut-off bar can be tightened with a cross screwdriver.

9. For adjustment of the clips, a special axle axle is used on the accessories. It is turning the passage. To reduce the clamp, the pin is rotated into the parallel with the profile (this is the extreme position) to zoom in - across.

10. In other models, there are no axles, the adjustment of the plastic balcony door is performed on the retaliatory bar. In this case, you need to insert the hex key on the bar on the bar and make something about half the turn.

After mounting the double-glazed windows on the balcony, various difficulties in the door are often occurring. They can be corrected using the service center services (especially if a guarantee was given on the work). However, in most cases, adjust the plastic balcony door is quite real and on their own.

It is important to learn how to determine the cause of the fault and use the appropriate repair tools. To do this, there are several simple test and step-by-step instructions, which will be discussed in detail in the article.

Types and advantages of plastic balcony doors

Today, plastic doors are used everywhere, which practically completely outdated outdated wooden counterparts.

At the same time, they can be equipped with different mechanisms, depending on which the doors are distinguished:

In most cases, the balcony doors are combined with windows that can be on different directions from it (right, left and less often on both sides).

There are also separate doors, and they also have their own classification:

• consisting of one half (single-section)
• consisting of two half (biscuit).

Schematically, these options are shown in the picture.

All of them have their own characteristics in the mechanism of the door lock, however, there are few operational characteristics. Accordingly, the problems associated with wear, approximately similar.

Along with the plastic, metal, glass and even classic are made wooden doorsBut the last two groups are much less common. Reason for popularity PVC doors In their simplicity and reliability:

• doors are convenient to use - they are comfortable to close, open and use in any mode;
• they are rather durable and proper montage and operating conditions can work troubledly for many years;
• they are easy to maintain in case of breakdown;
• doors are aesthetic and easily fit into different types of design.

Balcony door device

Before you understand how to adjust the balcony plastic door, you need to briefly sort out its device.

In most cases, a classic version with two windows and one door is used, located on the right or left of them, as shown in the diagram below.

The door consists of actually sash and accessories, which performs two important features:

• mounting door to the jamb;
• ensuring closing and opening the door in different positions.

Pen and castle

The main elements of the fittings are a handle and a lock that provides a reliable closure of the door and a comfortable opening. Depending on the characteristics of the locking mechanism, the locks can be with a latch (roller or dates) or without it, as shown in Figure 1.

The handle is usually mounted only from the inside of the room. It is inconvenient when it is necessary to close the door while on the balcony (for example, in winter). In these cases, an additional handle is installed, allowing you to implement this function.

NOTE. In case of installing the second (external) handle, it is important to make a castle from the inside to the outside strangers Could not penetrate the apartment.

You can clearly appreciate the convenience of such a device here.

Also, balcony doors can be performed in different designs, color, glazing area - for example, as shown in the photo.

Possible problems of operation of the lock may be related to such reasons:

• Improper use - excessive mechanical pressure, shocks by mechanism.
• Natural wear of components.
• Pressure from the door because of its skew toward the castle.
• Wrong mounting work.
• Non-quality materials.

Visual video instrument for repairing the lock mechanism

Latch

Along with the locking element, the door is often equipped with a special latch, with which you can adjust the desired width of the open door. This is necessary in cases where the door is not equipped with a folding mechanism, but it is required to open it for venting. Also the latch prevents access to the balcony to children or pets.

Schematically, the latch consists of the mechanism of fixing the door, which is attached to the surface with the help of self-tapping screws, and the regulator defining the width of the disclosure, as shown in the diagram.

Video Features Mounting Latch

Determination of the quality of the door on the balcony

All problems arising from the work of the balcony door can be divided into 2 large groups:

• associated with incorrect installation;
• appearing as natural wear.

Video - Features of the editing of the balcony door and windows

Immediately after installation new door You need to check the quality of work. There are several simple tests for this:

1. When closing the door, it is important to make sure that it is tightly pressed to the plastic surface along the entire perimeter.
2. The door should not shift vertically - i.e. Normally, it goes perfectly parallel box.
3. In the open door, the door must remain stationary in the absence of exposure (wind).
4. The door closes softly, without more effort;
5. The door lock is fully fulfilled and functions in any modes (if the door is equipped with a folding mechanism).

Of course, along with this product should not contain any external defects, scratches, damage, etc.

Problem Diagnostics: Step-by-step instructions

To properly adjust the plastic door on the balcony, initially you need to accurately determine the cause of the fault.

Door adjustment is needed in cases that are easy to determine independently:

• The door closes tight, with additional efforts.
• When opening the doors, you also need to apply force.
• From under the door, air is tangible.
• In a calm position opened door It cannot be fixed on the spot, "crawling" into one of the parties.

Replacing the rubber seal

Often problem zone Such a door (like many others) is a closure density. In winter and in windy weather it is easy to check the air from the air.

Council. Check the tightness of the door closing is very simple. Come along its perimeter with a burning lighter and pay attention to the flame. If it even swings a little from the streams of air - it means that there is a small slot in this place.

Basically, problems are associated with the state of a special seal (usually rubber). It may show mechanical defects:

• uneven occurring;
• lag from surface in certain places;
• relief, swelling of the layer;
• scratches, cracks.

Accordingly, the rubber is replaced with a new one. It is very proper optionSince the sealer is sufficiently available at the price, and the repair of the damaged product will not allow him to serve as long as I would like.

Usually the seal serves for a long time and needs to be replaced only in case of obvious wear. The replacement sequence will be like this:

1. First you need to remove the old filler, carefully dismantling it all over the perimeter.
2. Then in the groove is inserted fastening of new rubber.
3. The sealer is evenly lined up around the perimeter, while it cannot be stretched - in this case, it stretches even stronger when cooling, because of which cracks may occur.
4. In the nodes it is sampled with special glue.

NOTE. The seal will last much longer if 1-2 times a year to impregnate it with a special silicone solution. You can buy it in the relevant companies involved in installing plastic doors and windows.

Vividly replacing the rubber filler is shown on video

Here is an option with plastic windows, but the replacement of the sealer on the balcony doors is no different.

Repair of door fittings

The problem with the rubber seal is the easiest version of the problem. At the same time, it is necessary to check it first. It is more difficult for the situation with deviations in the castle or other door fittings, which is why it cannot lean to the surface perfectly tightly around the entire perimeter.

In this case, the diagnostic sequence will be like this:

1. First you need to open the door and applied to the surface sheet of paper.
2. Next close the door so that it tightly pressed the sheet.
3. Now you need to try to pull out the paper - in the normal one it is pulled out very hard.

If the paper is extracted from the presser space quite easily, it means there are minor malfunctions. They can be eliminated if you put constipation to the maximum.

The sequence of actions will be like this:

If the fit is not tight enough, then you need to go to a more complete study of the problem:

NOTE. If from the side of the jacket of the strip width, there will be about 3 mm, and from the side of the door handle 2 times more, it clearly talks about marriage when installing. In this case, it is not fixed independently. And you will need to reinstall the entire door. To check it, you need to measure the width of the doorway from above, in the middle and bottom. Values \u200b\u200bshould fluctuate within 1 mm.

If it is found that the door is a few already laid size, while it is uniformly, then the problem can be solved by another - the sealing rubber must be replaced by the one that is supplied entrance doors From plastic.

This rubber is wider and easy to compensate for the detected difference.

Balcony door: Step-by-step repair instructions

To adjust the balcony door of plastic, it is important to collect all required toolsSo that during operation it was possible to perform all the necessary actions at the same time:

• a set of different screwdrivers of all kinds;
• passatia;
• keys-star;
• hexagons of different sizes.

Next, the sequence of actions depends on the type of malfunction and the mechanism of the door itself. If it is usual, i.e. It works only in the "open-closing" mode and does not have a folding function, the repair will be much easier.

1. First you need to remove white lining from canopies if they are.
2. On the reverse side is a screw - it needs to be unscrewed by a hexagon.
3. With the help of a careful rotation of the horizontal screw to achieve the optimal position of the door. For example, if the door clings from above, 2 upper screws are lowered.
4. Next, you need to check the position of the door as it closes, and if necessary, perform additional adjustment.

NOTE. With a strong discrepancy, the door can be adjusted by simultaneously rotating all three connecting screws.

To adjust the clamp, due to the weakening of which there are drafts, a retaliatory plank is applied.

It has a hole where the hexagon is inserted and turns half.

Balcony Balcony Repair Video

in the video material is considered adjusting the clamp plastic windowbut its mechanism is similar to a balcony door

Ensuring proper handle

It often happens that it is necessary to adjust the plastic door itself on the balcony, it is not necessary, but the broken handle interferes with the correct operation of the locking device. In this case, the problem is determined by foreign sounds, turning the mechanism.

The situation is solved very simply - first from the handle the decorative pad is removed, and then the screws that fix it to the surface are pulled up to the stop.

Video instructions on how can you adjust the plastic door on the balcony

Folded balcony door: Step-by-step repair instructions

Door repair, which, along with the usual mode, functions in a folding mode, is not fundamentally different. But since the fittings in this case is more complicated, that is, its own characteristics.

Schedule Door

When the door is clinging the threshold and significantly saves, the sequence of actions to eliminate the problem will be like this:

If the door is above the norm

In the opposite version, when the door clings to the top, work takes a little longer. In this case, you need to adjust the position of the door using a screw in scissors, as shown in the photo.

For this, the door opens, the screw rotates a hexagon until it comes true. Then you need to check the correctness of operation - open and close several times.

Providing proper pressed

To properly adjust the clamp, you need to perform such actions:

The door opens and closes several times to check the quality of work.

NOTE. In order for the door to work correctly, and the fittings served as long as possible, it can be lubricated with machinery every year.

Problems that cannot be eliminated independently

All considered fine-term maintenance work on the balcony door can be divided into 2 large groups:

1. Works associated with equal or handled the door.
2. Works on regulating the pressure of the door to the plastic surface.

At the same time, there are some types of faults that are associated with a factory marriage or mechanical impact on the door that cannot be eliminated at home:

1. Loop doors cut off from the surface.
2. Complete or partial destruction of fittings (lock mechanism or door loops).
3. Violation of the integrity of the seams of the frame or the doors made during welding work.
4. A crack or knocked glass in the package.

Such types of violations are eliminated only by professional workers. Often, the question arises about the full replacement of the balcony door to a new one or the replacement of fittings.

NOTE. If the situation happened that you need to get into the apartment through a closed balcony, then you can do it, just breaking the glass. The fact is that the glazing replacement is much cheaper than the repair of the door itself or the more installation of the new one. In addition, it is faster and easier to implement additional services without calling.

Door repair on the balcony is carried out only in case of obvious violations in the work. Adjust the plastic balcony door is quite bye and man without professional skills.

The list of functional adjustments of the plastic balcony door, their features and methods of adjustment. The main problems of incorrectly configured doors and options for their elimination are described.

Adjusting the balcony sash overlap

Adjusting plastic cloth accessories

To be able to properly configure the plastic fabric should each owner of a typical design. The need to intervene in the structural component of the door may occur from the first day of the installation, as well as in the subsequent years of its operation.

After all, often B. summer season The door to the balcony is constantly left open, which leads a small but tangible keystrap, which can spoil the door frame, and, in the end, make the design of the structure is impossible. It is possible that the manifestation of sludge gaps and drafts, with a dense sealed position of the door, which poorly affects the insulating capabilities in general. So, a brief excursion is needed in the essence of the setting, which allows you to establish the correct operation of the door mechanisms.

G-Obada key "Hexagon"

Adjust the canvas without the required required list of tools will be quite problematic and will take a long time. So you need to have at hand:

1. Mr Obaase Key "Hexagon" 4 mm, and better fully all set (as screw sizes can be different);
2. Pliers (for the turn of the eccentric);
3. Cross screwdriver.

Setting the position of the plastic frame

Adjusting balcony sash

The beveled door canvas can be adjusted by linguing the loops. The number of loops on a typical design is usually no more than two pieces. The lower loop adjusts the sash in four directions: left, right, down, up.

In order to adjust the lower sash, namely raise or omit, it is necessary:

1. From the outside of the door to detect and remove the protective hinge cover;
2. Determine the desired screw at the top of the loop;
3. Turn the key to raise the sash (turn clockwise), or omit (twist counterclockwise), to its preference.

Article on the topic: Water floors do it yourself: Choosing materials and installation

This type of setting is used to eliminate the scarring in the lower and upper part of the web, due to its raising or lowering.

Adjusting the bottom loop

Adjust the bottom loop, moving the sash to the left or right as follows:

1. To begin with, find from the inner (or rather lateral side of the door frame, the required mechanism. It is very clearly visible when opening the door;
2. Further, the same hexagon key adjust the departure to the left (sorceressing counterclockwise) or to the right (in a clockwise direction).

In this way, you can optionally be able to adjust the position of the web relative to the vertical, and avoid lateral wiping. This mechanism should work in parallel with the upper loop, which also contains lateral adjustment.

Regulation of door loops

Adjusting the upper loop is similar to the adjustment of the lower, but fundamental difference is the placement of the twisting mechanism directly on the side of the web, this is due to the "ventilation" function at which the door bends forward, keeping only on the lower loops and the fixed device. On the structural feature of the glass package, also influenced the "Slotting" function, activated by the rotation of the handle by 45 degrees. Its essence is to safely ventilate the room, with closed locks.

You can get acquainted with the adjustment on the officially filtered video of the manufacturer.

Setting up a door shifting

Setting

Depends on the adjustment depends on how much the door leaf is closed. To check the clamp, it is necessary to carry out a small but important test:

1. An ordinary sheet of paper is taken;
2. It is placed between the sash and the door frame, so it would be possible to interact with it;
3. After closing the door, make efforts to extract it;
4. Repeat the procedure on all sections of slamming.

The result of the test is considered successful if the control paper is pulled out with some effort (too strong clamp is not desirable, since the sealant is quickly wearing). In another case, if the sheet is freely pulled out, either does not hold it at all, it will be necessary to set up the door closure.