How to choose, make and install the country washbasin. Street haunted man for giving: Types and ways of self-making Country washbasin with their own hands under the roof

Urban residents are so accustomed to the benefits of civilization, that even at home country areas Try to create comfortable conditions. The street washbasin for the cottage is one of these: the minimum set of amenities on the plot is simply necessary, because the hands have to wash quite often. Equipped near the house and beautifully decorated washbasin will undoubtedly add comfort to accommodation and will add to the design of the site.

What designs of washbasins exist?

There are several varieties of washbasins: with snacks and without them, suspended containers and structures on racks.

SAMI simplest model The washbasin is a three-four liter container made of plastic or aluminum, with a lid and pressure spout

The rear wall of the washbasin in the picture above is equipped with a special fastening, for which you can hang the container on a nail, driven into a wooden vertical rack. Water is poured into the tank, covered with a lid and substitute a bucket under it for collecting used water. Water poured into it as it is used. The top wall of the washbasin cover has a slightly concave corrugated surface, so that it can be used as a soap.

Suspended washbasins with a clamping tap equipped with a magnet that fixes it in the raised state, represent a more advanced version of the simplest model.

Some models are equipped with a valve crane, thanks to which it is also convenient to adjust the flow of water. The rectangular fifteenalistic plastic container is installed on a sink tumba, which is substituted by a bucket for collecting water.

Often you can find on sale and washbasins at the rack. Portable washbasins on the legs can be accommodated anywhere on the site

Due to the presence of special roar on the design racks, the washbasin is firmly installed on the ground in the garden or garden, slightly blocking it.

The washbasin "Moidodyr" is convenient because the construct sink can be used as a container for washing fruits, vegetables, dishes. In some models there are hooks for towels, shelves for soap accessories and even small mirrors. Washbasins made of plastic or metal are designed to install on open areas. Wooden washbasins equipped with water heating system are more suitable for indoor arrangement.

Washbasins with a table are stationary structures, the main elements of which are: the bulk tank, sink and stand-stand-rack

The simplest washbasin of plastic bottles

Provide yourself with a minimum set of amenities and make the easiest version of the washbasin plastic bottle.

It is best to use a bottle of 2-5 liters as a container. Thanks to the transparency of plastic, it is convenient to control the volume of water in the container

First of all you need to cut down the bottom plastic bottle. The bottle itself is fixed on a post, grape arch or any rack with a clamp or wire.

The bottle cover can be simply left in its original form, or to upgrade it by performing several punctures in it or adds the pressure spout made of screw or nail

Washbasin Ready: It remains only to fill the container, slightly open the lid and use it for a direct purpose. You can watch a video with an example of making a similar option:

Another original device:

A comfortable portable washbasin with a crane can be built from a five-liter plastic canister, barrels or a bidon. Plumbing accessories will also be required for the manufacture of functional appliances:

water faucet;
clamp nuts;
sgon;
two gaskets.

In the selected container, you need to drill or cut the hole of the required diameter.

Signs are installed in the hole of the tank, the gaskets on it are put on it and clamp nuts. It remains only to attach a crane and pour into water tank

Highlighting the washbasin is desirable to provide drainage, taking away the spent water into a cesspool. Behind the absence of the ability to equip the drainage system, you can simply use the container for collecting dirty water.

It is possible an option for placing a washbasin over the ground, the eliminated layer of gravel, which will act as drainage and prevent the mud around the washbasin.

Wooden "Moydodyr" on its own

For the manufacture of a more complex stationary design, which will not only be a functional, but also decorative element of the site, you will need 25x150 mm boards. The dimensions of the design depend on the size of the capacity with water and the preferences of the owners.

In vertical blanks, make eyelets for the arrangement of spikes. To do this, with a milling mill, a groove of 20 mm depth and 8 mm width are cut. At the ends of horizontal blanks with a circular, spikes cut out

All billets of the washbasin are collected in solid designs and are connected using self-samples.

On the inner sides of the lower part of the design prepare the foundation where plywood sheets will be installed. Sheets can be placed on glue, or fix with small carnations

Between the side walls of the top of the design placed the tank. The floor of the washbasin is laying out of the rails 20x45 mm. The walls of the upper part are fixed using self-tapping screws, so that if the tank flows, it can always be removed. The principle of manufacturing the design of the structure is quite simple: to the frame, the planks of which are connected to each other with a spike groove, a sheet of plywood is glued on the inside. On the door frame set the lock with the handle.

Washbasin is ready. It remains only to carefully polish the product, paint, and then install the sink

Additional options - Video Master Classes

Today everything. If you have some questions, please write in the comments.

Not always in the country there is network water and sewage.

But it is here that the most needed a school.

Performing gardening and garden affairs, then it is also necessary to wash hands, fruits, berries, vegetables, dishes after meals also need bath procedures.

Their main difference is in functionality.

The most common types of clothes:

Simple wicker. It is a mounted small tank with a presser nose. The container has a small volume - 3-5 liters. Fasten it simply - a only vertical stand is required. It can be a tree, fence, wall country building. Water into the container is poured manually, and the plum is allowed to do in a bucket or a basin and pour the drains into the cesspool as they accumulate. If it is rarely applied, there is no need to substitute anything - the drains will go into the soil. For their better absorption, it is necessary to pour a little gravel under the blueberries. It is suitable for washing, but this volume of water is not enough for washing dishes.
Large washbasins. It is a dishes from 10 to 18 liters - a rectangular, rounded or oval shape with an inserted crane at the bottom on the wall. Its convenience is that it is necessary to fill in water less often, and the use of the crane allows you to open water and use it without making any more manipulations. Capacity is made of stainless steel or plastic. Large clothes can be mounted on a vertical basis: a wall or a rack, both outside and indoors.
Rack on the rack. The water reservoir is fixed on the metal support at the top. This kind of washbasin is applied only on the street. At the bottom of the rack there is a crossbar, it is enough to press it onto it with the foot and the horn supports are securely robbed into the soil. This washbasin is easy to install in any convenient place garden and garden. The valve is mounted on the wall at the bottom of the tank, and the volume of water dishes is from 8 to 15 liters.
Racket with a tab. It consists of a cabinet, sink and tank. This is a multifunctional design, it can be placed on the street and in the house. Under the sink, inside the cabinet, it is a bucket for wastewater. The presence of the shell in the design makes it possible not only to wash, but also wash the dishes and garden products. The water tank is also equipped with a valve, which allows you to wash greens and berries under flowing water. It can be equipped with a mirror, a towel hanger, a coach for soap. In the tube it is convenient to keep cleaning accessories and means.
Heated washbasin. This is an improved model of a handicraft with a tab. The difference is that a tan is installed in the tank, heating water, the rest is all the same. Water heating makes it possible comfortable accommodation In the country: hygienic procedures with warm water, washing dishes hot and so on. Applying the thermostat, you can warm the water to a temperature of from 30 to 70 degrees. The volume of the dishes is usually from 10 to 20 liters. And it is performed from durable plastic used for the manufacture of electric kettles. Sometimes it is welded from stainless steel.

All types of college can be purchased in the store in the finished form, but it is not for everyone to pocket. Therefore, the collapse in the country is not difficult to do on your own, and even economically. Moreover, in this way, you can spend time with the child and teach it a lot.

Do yourself and get pleasure

For the construction of the country room, it will be necessary to purchase:

Tank for water and plumbing accessories. Under the tank can be adapted to the canister, bucket, barrel - it will save money for a washbasin.
Shell of the desired size and shape. Any old shell is suitable, especially comfortable, Soviet times a sanitary accessory.
Materials for frame and conjunction of the sink and tank. Under the end, you can also adapt old bedside table, Dresser, Television-secreter.
Special materials for the attachment of water and removal of effluents in the sewer. You can use a grated bucket or withdraw the waste pipe into a cesspool.

An old kettle with a spout is suitable for it.

It is to attach to the vertical surface, having long nails to her so that the kettle lay on them.

Pour into the kettle of water, close the lid tightly and slightly tilt it.

Washing hands, make the kettle so as not to flow.

Under the draining you can put a bucket or basin, if it is infrequently used, the drains will simply be absorbed into the ground.

Plywood

To make this washbasin, you need to prepare some materials and tools:

rectangular plywood sheet
wood protective impregnation
tank preferably galvanized
cranic
hose
device for draining wastewater;
frame carcass, you can from the old table or bedside table
ceramic tile
self-tapping screws, metal drill
brush, tile glue

Canister - not only for gasoline

Water tank can be made not only from plastic canister, but also an old large pan or tank. It is important that they have a lid - after filling the water, the container should be closed to avoid water pollution.

The selected container must be equipped with a crane, for which it is drilled out at the bottom or cut hole. To ensure tightness to the hole, it is necessary to install a Sgon, insulating it with rubber gaskets on both sides.

Sgon is fixed with the inner and outer side with nuts, and then a crane is installed on it.

Mounting drainage from the washbasin, the main thing to perform tightness of the joints. The impact of the effluent can be performed in several ways: to put a bucket under the washbasin, dig a drainage database, make a channel with a pipe to the waste hole.

Choice of lead wastewater Depends on the intensity of the use of the Russian manner and the volume of these effluents. If they are small, you can float the soil under the manufactured design using crushed stone or gravel so that the drains go to the ground.

Racks? Very firmly!

The row on the racks is easy. For the frame there is a steel pipe of any form of section and small. Tools will be required: Bulgarian for cutting pieces of pipe and welding machine.

For the stability of the frame to do on two supports located at a distance of 20-25 cm.

Water tank can be made from any suitable tank or buy in the finished form. The support is mounted as follows:

Measure the desired length of the supports and cut off two pieces of pipes.
For easy blowing of supports in the ground, the ends of them cut into oblique.
Cut off a piece of pipe for the jumper at the bottom and one more for a plank on which water dishes will be attached.
Swelling the jumper at the bottom of the supports, and the bar for the tank at the top.

Now to the supports at the top, on the bar, the container is fixed for if it is metallic, it can be simply welded. Equip it with a crane and put the wage in the right place by clicking on the jumper to the foot so that the support is well entered into the soil. Dial water into the container and can be used.

How to make heated

It is possible to make water heating in washbasins with a large capacity, such as Moidodyra or on supports. The main thing is that there was an electrical outlet not far.

It is possible to warm the water with a conventional boiler, but more convenient and safe to use a TEN with a thermostat. It must be installed in the container by 3-5 cm above the bottom, then it will work, and the water will immediately go warm. It is installed in the casing.

In this case, the block with the thermostat remains on the outer wall, then the complexity occurs in tank sealing. You can simply load the TEN to the tank through the lid and do not think the integrity of the tank.

A little about capacity

Thinking up the construction of the country washbasin, you should think in advance some questions regarding the choice of water tank so that it is durable, easy to clean and ensure normal pressure.

If you do an accessory with a table, then you need to take a large container, at least 10-20 liters - a smaller volume of water does not make sense. Important It also has a material from which the tank is made. Usually they are made of and stainless steel.

The choice remains for the owner, and it is guided, as a rule, the cost of things. The container for the country room is better to take from the stainless steel, because it is durable and reliable. Plastic can burst, crack or split if the construction suddenly falls.

To do not regret it, it is better to spend it once and confident for the strength of the container.

The reservoir form is very important. The higher the water level in the reservoir, the stronger the pressure from the crane. From a flat and horizontal tank, water goes with a thin flowing. Capacity should be chosen with an elongated up form and that the bottom has a tilt towards the crane.

The location of the crane also plays a role in the jet pressure. The lower the crane is embedded, the pressure is stronger. This is especially true of the valve cranes, in which the pressure is lost already when it is opened.

In addition, located below the faucet, makes it possible to complete the use of water filled into the water tank. It will not be necessary to constantly add, not yet an empty capacity of the next portions of water.

It is not difficult to choose a model of a washbasin, a place for its installation and even make an independent washbasin on the cottage. Without this attribute, no work is possible in the garden or in the garden. Even the rest will be uncomfortable if you constantly ask someone to pour water to just wash your hands.

How to make a cottage washbasin with your own hands - On Video:

For Dachnikov, the question of conducting hygienic procedures is always relevant, since excavation Require a washbasin. This or that design is established depending on the availability of water supply and electricity. Consider how to solve the problem with a washbasin, based on different conditionsAnd what options washbasins can be used in the country.

Features

The selection of the device for washing depends on the water supply method: water pipe or manually filling capacity. Modern cottages Equipped with centralized water supply, but most of the country's farms use water from the well, bridally or from the artesian well. This determines the separation of washbasins into two types of devices.

Standard crane device - with power supply pipes.In the country, it is convenient to equip such a washbasin next to the garden or in the courtyard so that the land does not score the drain sewer. Water supply is centrally, the site owners can only make a label for a washbasin, sink and crane can be bought in the store. The stand under the sink is purchased ready or mount on their own to the desired height and are located in a convenient location.

The disadvantage of this type of washbasin is to limit the use of the warmth of the year, since with the onset of the first frosts of the pipes can burst.

In order to avoid the failure of the water supply unit, the water supply is overlapped and drained water from pipes. Good way Extending the deadline for using the washbasin is the insulation of the outer water supply using glass gambles. This type of insulation will allow for a couple of months a year to lengthen the operating period, but in the late autumn it is still necessary to complete water supply overlap. The construction industry offers for winter use in the country. Specialized water pipes with insulation and electric agent inside the outer circuit of the insulation, which protects against the drainage of the water pipe along its entirety at negative temperatures.

The presence of electricity will allow the use of TEN and inside the washbasin.Hot water supply at the cottage is a luxury, in any weather it is more often washed cold water. Today there is a wide range of washbasins with elements for heating water to make a comfortable stay comfortable. Such designs will require good electrical insulating and the fireload device. Capacity can be single-chamber, then heating should not exceed 40 degrees. In devices with two cold and hot water cameras, a crane mixer is used.

Traditional batteries - this simple schemewhich uses water mass pressure: the container is filled with water, the hole with the valve in the form of a rod is made in the lower part or the crane is installed. Various industrial models of this type are available.

County craftsmen show wonders of ingenuity using well-grade materials for the design of water lugs from plastic bottles or tanks. Place country washbasins on sunny Place For natural heating of water.

Regardless of the water supply scheme, the presence and lack of heating, all the clothes can be convenient to use.

First of all, you need to organize drain. In the simplest models, fortified on the rack, it can be a specially equipped drain groove, the walls of which are concreted or used pipes similar to the roof gutter. For draining you need to ensure bias and sufficiently high sides that protect against splashes. It is more convenient to use a sink tobemba and with a drain, which is displayed in the underground tank or under the slope is given to the selected place on the site.

Let us try more about analyzing a variety of design patterns and design models of country washbasins.

Main species

Classify the countrywear can be classified on mounted, frame and tumb, heated or without. The only one in the recent past is a mounted street model - a metal or plastic hanging tank with a valve at the bottom. Such washbasins are attached to a pillar or a wall of the house or on the frame, and the usual bucket is used under the draining. They require fully manual maintenance and on winter time Clean the room.

With all the simplicity, this is a very popular model that uses unchanged demand. This is the best option, besides, it is available in a large color scheme.

The disadvantage is a small tank volume and the need to often add water. Advanced models have a tank of greater capacity - from 10 liters and more. Equipped with a crane to regulate water pressure.

The high weight of the filled tank requires a frame stand and good attachments to the support. The stand is equipped with a sink and a place for a tank under the used liquid.

The stationary washbasin for giving is installed on a flat site. Frame legs can be recessed into the ground. To preserve the smooth position of the leg, strengthen the support from the solid material or the legs are used in the form of an inverted letter "P". Drain in dense soils are organized in drain pit or in the drainage ditch.

Sandy soils Do not require special plum, it is possible to allow water to be absorbed into the ground. In this case, the ground under the washbasin falls asleep with a layer of small pebbles or clay in order to avoid puddles.

The following water supply is the design of a garden washbasin, attached to the street shower tank. In this case, two tasks are solved at once: natural heating of water and the presence of a large volume of liquid. Water supply pipes are mounted to the tank tank, the calculation system is installed or manual adjustment of the filling is used using an additional crane at the pipe input.

The same option is convenient to apply and in the presence of electric water heater in the shower. These models are justified if the location of the washbasin next to the shower is convenient than the owners of the cottage.

In large areas or with a significant remoteness of the garden from the economic buildings it is worth choosing a model with autonomous heating of water. Here there are options for independent connection of the Tan in the usual design without heating water or the purchase of a ready-made tank with a built-in ten.

Quality I. modern models offer many Russian manufacturers affordable prices. Independent connection will require the knowledge of the subtleties of working with electricity.

To heal water, electric heating element uses plastic and metal tanks. Choosing a tan for independent installationYou need to calculate the required heating power. Too weak element for a large water container will make the heating time very long, a powerful element will make water burning hot.

Good choice there will be an acquisition of a heating element with a thermostat or selection model with two capacities for cold and hot water. Special attention is paid to electrical insulation for safe use.

Street washbasins differ in the fastening method: on the frame and on the end. The frame can be made independently of wood or metal, as well as purchase ready. It is selected at a convenient height, and the length of the support leg depends on the mass of the water tank, and the larger the weight of the tank, the deeper the supports in the ground are close. Massive structures will require concreting legs to preserve stability.

Another common option is the fastening of the washbasin on the "Moidodir" type. Here the frame is covered with moisture-resistant material and has a neat look.

The washbasin with a table is equipped with soaps, towel holders, a mirror.These devices create comfortable conditions for use.

Design can be chosen for every taste. There are models from different materials and with various filling - from "all inclusive" to elementary devices.

Finally, the last type of dacha washbasin without a tank and without heating - directly from the water supply system. Pipes are summed up to the sink on the end, or a decorative support of wood, stone or metal is suitable. If the conditions allow, the street displays a plumbing associated with the electrical installed in the house gas water heater. Such a system should be located near the heat source.

It makes sense to install in the yard or next to the bath or summer kitchen. In remote corners of the garden use running water or installed tanks with fans.

Materials

Washbasins are made of traditional materials: plastic, metal, wood. Easy and practical plastic are used for simple attachments with valves or cranes and for heated models. Modern plastic is a durable material that is not subject to corrosion, it is easy to operate, easily maintained clean. Galvanized steel or metal tanks are more durable, they will serve for many years under the absence of rust.

Big advantages have stainless steel tanks. Stainless steel is almost no corrosion, has a long service life, good decorative qualities, but also the cost of such products is high, which is not always justified for the cottage.

The frame is preferably made of metal or wooden bars. Tumbers are trimmed with plastic panels or walp sheets, MDF or natural lumber. Choppers They can serve only indoors, since under the influence of moisture, their service is reduced to one or two seasons.

Finish from plastic panels It has a variety of color gamut, can also imitate a coating from any natural materials. They are easily clean and cost inexpensively.

The finish with natural wood always looks noble, but the moisture destroys the wood and gives it a dark shade that over time it will look unesthetically. Wooden parts of the couch should be regularly treated with antiseptic preparations or cover paint on an oil basis.

Garden washbasins made in a traditional rural style fit well into a country life. The win-win version is a stainless steel stainless steel finish. This design is ensured by a long service life and excellent appearancewhich is supported only wet cleaning With any detergent.

The material of the manufacture of washing and cranes can also be chosen according to their preferences and conditions of use. Choosing a country washbasin must be taken into account, at what time of year it will be used and how often. If only to wash your hands before eating or returning to the city, then plastic models are selected. For permanent residence At the cottage in the warm season, more durable material is selected - metal sink or tank. Fayans or ceramics at the cottage - not the most suitable choice Due to the high fragility of these materials.

Dimensions

The size of the water tank depends on the number of users. For a family of four and trips to the cottage on the weekend, there is enough tank for 10-20 liters. Larger (30 liters or more) is intended for permanent family living outside the city. If the water has to go far and you rarely visit the dacha, you can stop your choice on simple attached models not more than 5 liters volume. Calculate the desired amount of water and the size of the tank for the heated models, so as not to spend excess electricity to the unsighted residue.

The washbasin cabinet has dimensions, where 5-7 centimeters are added to the sink size of the sink. Standard stands have a width and length of 60 centimeters, a height of 75 centimeters for sink and 1.5 meters for a supporting wall.

Style and Design

Finished models of washbasins have a diverse design. For supporters of High-tech style, it is appropriate to choose a washbasin, fully made of stainless steel. The design of giving in the style of Provence will support the model of plastic pastel tones. The classics are considered to be the couch, covered with panels under a natural tree with a tank, located behind the rack panel and with a large mirror. The ornament of colors in the finishing of the street washbasin is harmoniously suitable for garden vegetation.

Simple cottage washbasin can turn into a piece of artIf its standard design is realing by plants or give it an unusual form. Kisses summer kitchen Over the open air can be made of a frame that is covered with rails. You need to make a tabletop to make a comfortable length so that it can be prepared on it, transplanting flowers or canning vegetables. The supporting wall and the end is equipped with shelves for storage and hooks for utensils and hygiene items.

Easy and inexpensive design from natural tree It will organically fit into the landscape and will become a comfortable kitchen in the garden.

Original decision Decorating a tank for washing and sinks with a drain in the barrels, thereby will be emphasized by the rural style of its estate. Such a design is not difficult to implement if the farm remained old barrels. They need to be treated with a skin, mocked the appropriate veil so that the supporting wall and kegs become the same color, and cover with wax or oil. In the upper part of the barrels insert the sink, the tank decorate the half of another barrel.

Modern minimalistic styles welcome simple rectangular shapes without decoration elements. Purchase a simple monophonic white or gray plastic kit with a table, install it in the right place. Next, place the pummers with flowers, placing the washbasin place above the table with flowers. You will wash, and the flower bed at this time - irrigated.

The Street Hepheric School of Heated will require the construction of a canopy to comply with safe operating conditions. Even if the washbasin does not have heating, it will be more comfortable in rainy weather to have a roof over your head for hygiene procedures. The simplest canopy can be attached to the frame and have a shape of a single-table or duct roof. The roof can be made of a professional sheet, wooden plates or polycarbonate. The use of polycarbonate allows you to build an arched construction from metal arcs.

Famous manufacturers and reviews

Famous Russian manufacturers offer a wide range of ready-made dacha washbasins that meet the diverse demands of consumers and having a wide price range. The most popular heated models are washbasins "Elbet" - inexpensive devices with a powerful water heating element, sensors temperature mode and high water capacity. According to dachnikov, they have good performance.

Do not give them as washbasins "Spring". They are made of stainless steel, which significantly increases their service life. We are produced as heated models, and without, the tank has a volume of 16 liters and more.

"Sadko"- This is a compact model with polypropylene housing, water tank accommodates more than 18 liters. Consumers note the ease of assembly and installation, comfortable and durable fastenings of design details.

Good washbasins offer companies like "Cascade", "Dachnik", "Chiorel", "Double", "Leader", "Waterfall", OBI. Production of the company "Aquatex" Won popularity due to good quality and budget prices. Washbasins have a diverse design, the volume of the tank is over 20 liters and heated. When choosing a model, you need to pay attention to the method of heating. "Dry" Heating provides a steatitic pipe with anem inserted into it. This method allows you to quickly and without the formation of scale to warm the water, they do not break when connected without water. "Wet" Heating is similar to the work of the boiler, it is less safe and more susceptible to breakdowns, which makes the price of such washbasins somewhat lower.

How to choose and install with your own hands?

Selecting the model in the store, you need to be guided by the following arguments:

season of use, heated or not;
street or home operating mode affects the choice of manufacturing material;
the size of the tank based on the number of users;
case design.

Having determined these criteria, it is enough to choose and install the washbasin at the dacha with your own hands.The main task is to reliably fasten the tank with water on the support. If this is a ready-made model with a case, you need to accurately follow the instructions and firmly fix the tank on the panel, it will ensure the safety of use.

Independent accommodation will help carry out a set of terminals and fasteners that are included in the sale. The frame is purchased in the finished form or is made from the girlfriend. The metal legs of the frame are taken to the ground in proportion to the weight of the filled water tank - the harder, the deeper. The height of the frame is calculated on the basis of the commensuity of human growth, but so that the tank hung is not lower than 1 meter from the ground.

For greater stability, the frame is performed in the form of a hand. It is manufactured as follows: prepare corners of steel 25x25, or a wooden timing with a cross section of 50x50. The sink dimensions measure and calculate the skeleton dimensions. Of metal profile Or bars cut the desired length details and screwed or weld with manual welding. If you wish to make a closed design frame wooden rails, chipboard panels or MDF or plastic and set the sink.

Plastic frameworks frame - a more practical option for use on the street.Tumba can be covered with moisture-resistant paint. It is worth noting that the paint on the street washbasin will have to be updated annually. Chipboard and MDF panels are suitable for home only. To extend the service life of the frame, you need to isolate the legs from the soil moisture. For this, the metal is painted with an anti-corrosion composition, and the wooden parts of the design are treated with rotting. Drain of water is organized or autonomously - in a bucket under the sink, or stationary - to the drain pit. For stationary drain, the sewer drain pipe is mounted in the back of the couch.

The rear wall is adjusted by the vertical framework, which will be strengthened the water tank, mirror and hooks for towels. The side walls of the cabinets are sewn panels, the rear wall can also be sewn panel, and when installing the wall, it is left open. On the front wall of the cabinet hanging the door on the loop or leave the open, if desired, this place can be reapged by a curtain. Street washbasin is better to put on a solid paved platform.

It is not difficult to make a heating system yourself to make a heating element of the desired power. It must correspond to the magnitude of the water tank. It is better to stop your choice on models with a thermostat. Fasten a tan on the side wall of the tank at the bottom of the tank. The upper arrangement will make heating less efficient, the TEN will often be able to cut off from reducing water levels. The installation of the heating element is conjugate with the need for careful insulation of the terminals and wires.

For long-term operation of the dacha washbasin, you need to follow certain rules. Before the winter season, it is necessary to merge water from all tanks and pipes. If still a pipe frozen with early frosts, then repair a damaged area: couplings are installed on breakouts or replace a piece of pipe. Easier to perform this operation with polypropylene tubes. The heating elements at the failure are replaced with new ones. To do this, you need to purchase a model with a similar design and power.

Warm with heated is better to use indoors. Street heated tank must be placed under a canopy. For the winter, the washbasin with the heating element is necessarily removed in the barn or to the house. All metal parts need to dry well and wrap the washbasin with a dry polyethylene film for winter storage. Plastic tanks of bulk washbasins for the winter are desirable to remove from the support and remove into the room, since the ultraviolet and temperature drops destroy the plastic, and moisture getting inside the tank during freezing contributes to the deformation of its shape.

Metal and wooden stationary street washbasins dried and wrapped with a film, tied with a rope and leave for winter in the open sky.

Successful examples and options

The placement of the washbasin on the dacha depends on the needs of households. At the garden are installed simple designwhere the hinged tank is attached to the frame. Around the carcass legs can be planted with curly annuals to reaploit the supports. In the courtyard it is more convenient to use a sink tumb. The advantages of the angular location are to create a hidden area of \u200b\u200bhygiene zone. If you decorate it with plants or painting, this zone will acquire a special charm. Advanced subscribers of cabinets with a computer for adjusting the heater are placed in the country kitchen, a bath or soul.

It is very convenient to purchase a washbasin model with a pump for pumping water with a foot pedal, where the tank is connected by a special hose with a common water tank for water intended for household needs. Pump allows you to contact the tank for washing with water, which will be a big advantage when working with Earth and for hygiene purposes.

Country crafts with fiction and fantasy decrease the corner for washing, creating stylish compositions of wood, stone and metal.

In the next video you will see how to make a clothesman for giving with your own hands.

Each owner of the country area tries to create comfortable conditions on its estate. This is especially true of the inhabitants of large cities, which are familiar with the benefits of civilization at hand. In addition, in the country you need not only to relax, but also work, and if you do not have a water supply, then you will face certain difficulties. We will tell you how to make a washbasin at the dacha with your own hands.

Correctly choose a seat under the washbasin

If you assume not only to come to the cottage in the evenings, but also live on it for several days in a row, then the permanent availability of water you need. Waking up in the morning, it's so nice to wash the cold water, getting a dream and cheer up to start working with new forces.

Most often we are faced with the lack of water supply and sewage on dumart sites. Of course, you can independently drill well and provide the estate with an almost full-fledged water supply system, but this is a time-consuming and expensive occupation, besides, far from payback, especially against the background of what you will use only in warm season. In winter, without control, the pipes can be altered, burst, or even just divide the hands of unreliable social elements.

Therefore, we will choose our choice on a simple, lightweight and habitual design of the washbasin - Mojdodyra. The first thing to be solved is: where will this washbasin be installed - in the yard or inside the house?

Find comfortable spot In the yard for a washbasin

It will most correctly make or acquire such a construction that in summer, in the hot time, you can leave in the yard or in the garden, and with the onset of cold weather - to put in the room. So you do not have to adjust the sewage and water supply. The only thing you will have to decide - where exactly put Moidodyr.

The washbasin must be in an affordable place so that you can use them at any time. If you like warm water, install the construction on the sunny side so that the water-containing capacity is well warmed. However, many believe that it is better to place a washbasin in the shade, especially if the plastic container.

Well, one more important questionWhat is the washbasin to choose? It all depends on your personal preferences and opportunities. Washbasins are:

bulk;
suspended;
washbasins-racks with a table;
washbasins with heated.

Each of these washbasins can be used as portable, and can be firmly fixed in a specific location. If you do not want to bother, then any view can be purchased in the store. But make it yourself, especially from the remedies, not only much cheaper, but also more exciting.

Using sweater means

Even if you still have only plans to create Moidodyra in the country, wash your hands and wash it all the same. In this case, we will come to the rescue, the simplest, marching option is a plastic bottle with a volume of 1.5 liters. Cut the bottom, turn over and secure on the wire to the tree branch, fence, etc. The water is poured on top and is well heated. You can make a full-fledged washbasin, having attached the holders for soap, toothpaste and brushes.

Plastic bottle washbasin scheme

So that the water from such a bottle flows is not constantly, and then, when it is necessary, you can use several devices.

The easiest way is a nail into a plug. In the center of the cover of the bottle, do the hole and insert a nail into it so that the hat remains inside. Tightly screw the plug. The cons in the fact that water is leaking, and from this nail rust, besides, it is not entirely comfortable to wash your hands with such a non-permanent supply of water.
The second way is easier to use. A hole is made on the side of the lid. When the lid is unscrewed, the water begins to pour as much as you need. Screw the lid - water will stop. The minus of the method is that it is not very easy to control the sufficient level of unscrewing so that the cover does not break thoroughly.
The third method is also simple: you can attach a crane, for example, from a washing machine, to the neck bottle with a tape. Water will go the way you need, and you can be sure that the crane does not break if it was well fixed.
The same crane (or purchased, from the economic store) can be attached to the plastic container with a volume of 5 liters. To do this, sufficiently drill a hole the desired diameter And fix the crane in it. The tin or enameled bucket as a container is also perfect.

Such homemade manuals from the subwoofers can be disappeared by various drawings. Children will be very happy with the possibility of attaching fantasy and efforts for a common cause.

What can I make a washbasin in the country?

More complex washbasin design

Such a washbasin will be more severe, and therefore it needs to be installed at a permanent place. This implies the same place to plum, which, however, can be replaced with a bucket or basin. Copy used water can be accommodated for irrigation of small flower beds or beds.

So you will need:

large capacity (bucket, canister, bidon volume from 10 liters);
sgon;
strips for crane;
clamp nuts;
water crane.

Make a hole on the container. It should not exceed the diameter of the camp. Depending on the material of the tank, select, drill or cut the hole, and place a Sgon into it.

Put on both sides of the brass rubber gaskets and fix the nuts on both sides. Now install the crane, and your garden washbasin is completely ready. Having it on the plot, pay attention to the soil at the installation site. If you do not plan to make a drainage to the cesspool or in the garden, then you definitely pour several gravel vestors under the washbasin. It will keep you from dirty puddles.

Use a larger plastic barrel for a washbasin

If you are not constrained in time and means, you can make a more practical and solid cottage washbasin along the same scheme. For him you will need:

tank and plumbing fittings;
sink of the desired size from a suitable material;
materials for frame or tank connections with sink in one design;
materials for supplying and removing water.

Build a frame of metal and wood, taking into account the size of the tank, sinks and hoses. Install all the elements to the finished frame, connect them to the water supply system and drainage. If you planned a bulk washbasin, then the connection to the water supply may not be required.

Choose a reliable water capacity

If in your plans, the manufacture of a washbasin with a table, then you should not independently do the water capacity from the girlfriend - you will only spend time, and it looks like this design will be non-source. The finished tank with the built-in crane is inexpensive, and it looks much more beautiful.

The optimal volume of tanks for the washbasin is 10-20 liters. Little takes no sense, but a larger suitable for the summer soul. As a tank to Moidody, it will be too bulky, and water in it can be stated.

Pay attention to the material from which the container is made. Prefer the stainless steel washbasin, it is durable and resistant to damage. Plastic is more easy and cheap, but it can crack from the blow, especially if filled.

The shape of a washbasin is also very important. From it directly depends on the water pouring from the crane. If the container is low and is in a horizontal position, the water will flow with a thin jet. How do we remember from school Course. Physics, the pressure is the greater, the higher the toll of capacity. Therefore, it is better to choose a tank with an elongated up shape. The optimal version is a washbasin with a non-planning bottom, leaning towards the kolyan.

Carefully choose the tanks for the tank

You should not remind you that the crane must be located as close as possible to the bottom of the tank. Now washbasins are becoming increasingly popular, in which the valve crane is on the front wall. The pressure from it will be lower than from a washbasin of up to 5 liters with a clamping crane. In such a tank, water pressure is lost due to the location of the crane. Due to the loss of pressure, water in the container will have to simplify frequently. Therefore, choose a model with the lowest possible crane.

We make a tumba for Moydodyra on your own

Perhaps with old times you have a sink sink. It will great like a standard tank and sink. In this case, you will only need to clean it, paint, and maybe add a couple more elements to the design. Well, if there is no such washing, you can easily make a frame for yourself. For him, you will need wooden bars with a cross section of 50x50 - 80x80 mm or steel corners 25x25-40x40 mm.

The optimal height of the couch on which the sink is located is not more than 1 m. Take the corner or bar and cut 4 parts of 85 cm each. The size of the chanda frame must be such that the sink easily lay on its edges, so carefully measure the design elements.

Modern models Moydodyrov

Cut 8 pieces of timber (corner) under the sink size. As a rule, it is 50 cm. Collect the framework and fix: Fly, if the bar used, and boil - if the metal corner.

Please note: Focus on the inner edges of the frame, since the sink will be laid. Steel frame after making need to be projected and painted to avoid rust.

The skeleton of the cabinet can be seen with such materials:

plywood shield;
wooden plank;
polycarbonate;
steel sheets;
plastic panels.

So that plywood and tree did not get into disrepair, sprinkling on the street, cover the design of varnish. The back wall and sides of the cabinets completely cut, firmly fixing the material on the frame. Front jumper on the loop door from the same material as the frame.

Make the floor in the cabinet from the board, leaving the gaps between them about 1 cm so that the spilled water goes into the ground and the air circulation was ensured.

Additional elements of the washbasin

It is possible not to be limited to the frame of the sink cabinet. To make it convenient to use the washbasin, make a tabletop that can serve as a dryer for dishes.

The dryer can be attached with both one and two sides. For this take wooden boards With a cross section of 25 x 15 mm and run them so that the dryer is in the form of a lattice. The distance between the table should be 1.5-2 cm.
You can make a two-level dryer. To do this, at an altitude of 35 cm above the ground, make another framework and score on it.
Be sure to cover the dryer with varnish so that it does not smell over time and not spoiled from moisture.
For countertops, take plastic or wood stove And place it on the frame made under the size of this slab.

Frame for a washbasin can be made independently

On how to organize a drain of water from the sink, we talked above. You can use the usual bucket in this capacity. This is especially good if you wash not only your hands, but also vegetables with fruit, as well as dishes with food residues. Thus, in water there will be organic remnants of products, and such a fall can be sent to a compost bunch for humus.

If product cleaning and food remnants are not discharged into the sink, then you can connect a corrugated pipe to the drain hole and take it to the wastewater.

Video on the installation of a washbasin on the country area

Now yours garden plot Equipped with a comfortable and functional washbasin. We hope that our tips will help you make it quickly and easily. Tell us about your experience in the manufacture of dacha washbasins. Warm summer and easy work!

As they say, if the little things determine the consciousness of life, then the rowman determines ... I do not know what. But it definitely becomes easier with him. In my area there is no stationary wobbula style, and the builders' guys took their own. So somehow I got together and went shopping in search. Everything that I saw on sale did not really like it, so this article here appeared.

Method number 1: nail in traffic

The easiest and obvious, of course. We make a hole in the center of the cover from a plastic bottle, insert a nail with a hat inside, screw the cover.

Problems: Water leaks, rust nail. And besides, the problem is common to all the rods with stock: while you give it from below, the water flows, but they cannot be worked out and wash them, and when you let go, the hands are released and you can wash, that's just water no longer flows :).

Method number 2: hole in traffic

Make in a bottle cap triangle cut outside. Then turning the water cover will flow, the crane closes in the opposite turn. Original and easy.

Problems? Read a cheerful story from one forum:

"A 5-liter colorhouse I built according to the recipe described: you turn a lid slightly - a thin stream flows. The unit hung on the corner of the arbor, downstairs sipped a shallow hole and poured there a bucket of one and a half PGS. Everything perfectly served as I was engaged in bringing cottages in order. And then - the relatives began to come ...

The first came to my mother: I wanted to flow better and turned more - the lid flies, all the water is down! I explain that it is necessary to unscrew less. An hour later, the mother-in-law is suitable for the Russian Federation ... Well, you understood. I explained the same thing, the truth is no longer so calm. And here hands goes to wash your wife ... Yes, more than once, and two for an hour! Taking into account the fact that the day is just beginning, and the water is brief and it is almost no, my educational speech begins to resemble a motorcycle without a silent.

And then the washbasin attracts the attention of children. Usually they will not make their hands, but it is under normal crane. Well, I make a special step from a big chumbach for them. Voila! Children unscrew the lid in the same way twice in a row! Scold children tongue does not turn around ... The next day I go to the store and buy a regular 3-liter plastic washbasin. Having hung on the same place ... "

Method number 3: Cranic in the neck of the bottle

By analogy with the first two practically. We take the crane from the washing machine, for example, a couple of turns of the tape, and ready.

Method number 4: Krank in a plastic container

Just take instead of a bottle of a plastic container of liters for five, drilling-cut the hole at the bottom of the hole, insert the purchased crane. Voila. It remains to come up with drain :)

Method number 5: Krank in the usual bucket

Who likes how. Of the advantages - the bucket is easier to decorate (see video clip below).

Method number 6: pin + cork + bottle

In the lid of a large plastic bottle, we make several holes plus 1 in the center. Insert the pin to the center. At the bottom, make a handle. Insert the rubber plug-plug attached to the pin. Type as in a bathroom plug for drain or crane from pharmaceutical heating.

Method number 7: "For advanced"

Take a 5-liter bottle. Cut the hole 10 × 8 cm in its day.

We take a steel rod with a length of 18 cm and a diameter of 5 mm. Handsaw for metal we cut along the axis of the top end of the rod. Ends of the rod weep the screwdriver. On the opposite end, cutting the thread M5. On the rod we make two transverse cutting 1 mm depth at a distance of 65 mm from the end. On the rod cling the washer and the fixing bracket from the wire with a diameter of 3 mm. Insert the clamping spring with a diameter of 10 mm in the bracket. Its height is 15 mm more for the height of the bracket. On the rod to the support washer wear a rubber gasket with a diameter of 10 mm. On the bottom, put the rubber washer. In the cover of the center drills the hole. We collect everything: a bracket with a snap-in buffam to the roof with two screws, on the bottom end of the rod screwing the cap from the tube toothpaste. Metal parts cover enamel so as not to rust, we put in the tank. Everything…

Method No. 8: Washbasin of kettle

What could be easier? Joined the kettle, put a basin from below - all the cases.

Video on the creation of the watersmakers do it yourself

Method number 9: Designer washbasin of buckets

Master class on creating a galvanized bucket and a crane, as well as a washbasin of a bigger bucket, Durcher and Siphon. Buckets are beautifully placed by the film, so they called it a "designer washbasin for cottages" :)