The most economical bathroom renovation. Budget renovation in the bathroom with your own hands. Ease of maintenance and installation

The budget is limited, and the bathroom needs urgent repairs? No problem! Knowing some secrets, you can update the room without much cost.

Secret 1: Don't over-plan

If you decide to make repairs with your own hands, first create a clear diagram on which you depict where and what will be located. Decide where you will put the washing machine, cabinet and so on.

Just remember, if you want to save money and time, don't start rearranging the bathtub, toilet bowl and washbasin. Otherwise, you will have to spend additional forces on pipes. Leave the plumbing in place.

Secret 2: Use PVC Wall Panels

Many people think that it is easier and cheaper to paint the walls with paint. You can agree with this if you already have perfectly even walls. But, as a rule, before finishing it is necessary to dismantle the old coating, and then level and plaster the surface. And these are forces, time, costs for materials and tools.

The best option is plastic panels for the bathroom. Their installation does not require surface preparation, as they are attached to the crate.

The main advantages of PVC panels for the bathroom:

• inexpensive;
• easy to mount;
• are not afraid of moisture.

Secret 3: the simpler the ceiling, the better

But for the ceiling, painting is best suited. As practice shows, this is the most reliable and durable way to finish for a small budget. The main requirement is that the paint must be waterproof.

An alternative is PVC panels, which we talked about above. They will become the best option if the ceiling is uneven. In addition, such a finish will help to place the lighting as you want. The same advantage is also stretch ceiling- they are also often used in the bathroom.

And the most budgetary way is a simple whitewash. This is an environmentally friendly and cheap solution for a flat surface. But choosing it, you will often have to update the whitewash, because the surface will deteriorate from high humidity.

Secret 4: Put the practicality of the floor above the attractiveness

The floor in the bathroom must be reliable. Don't look for the original pattern and texture. Quality comes first here.

Experts advise buying ceramic floor tiles. Of course, it must be resistant not only to loads (especially if it is planned to install washing machine), but also to humidity.

And remember: inexpensive dark blue, black or gray tiles on the floor in the finished interior will look much more aesthetically pleasing than expensive lurid counterparts.

Secret 5: Forget Brands

Brand does not always mean quality. And sometimes a promoted trademark for the buyer speaks only of inflated prices. It's no secret that many of the products under famous names are not produced in the home of the brand.

Therefore, when purchasing plumbing and finishing materials, it is better to pay attention to specifications and product properties, material and warranty. And don't listen to salespeople who say otherwise.

Secret 6: why buy new when you can upgrade the old

Don't throw away old bath if it can last for decades more. Restoring the surface of a reliable product that has been tested over the years is much cheaper than buying a new thing. Acrylic coating, for example, will cost only 3-3.5 thousand rubles, and the bath will again become snow-white and sparkling. It's better than buying new plumbing. And the pipes under the bathroom can be closed with an inexpensive standard plastic screen.

Secret 7: Don't Go for a Unique Design

Simple and concise solutions always look more profitable than too bright and pretentious ones. Plus, it's easy to save money. Let the background be calm - you can dilute it with inexpensive bright details: colored curtains, rugs and original accessories.

If temporary measures are needed

We do not always make repairs thoroughly and for a long time. For example, in a rented apartment, you often have to come up with all sorts of tricks to make the room more comfortable and beautiful with almost no investment. And sometimes the tile in the bathroom falls off completely unexpectedly, when our budget is not yet ready for big expenses. In this case, temporary measures can come to the rescue:

• You can lay linoleum on the leaky floor in the bathroom. A wide rubber mat will also work.
• Another trick is to cover the unsightly part of the wall with a picture or any other decor that you can do with your own hands.

Use all the secrets of budget repairs, and you will meet the minimum amount, and your guests will never guess about it!

Organizing a budget bathroom renovation with your own hands is a doable task. The right strategy for choosing finishing materials and a clear idea of ​​the progress of work will allow even with a modest budget to transform the bathroom without sacrificing quality.

Organization of the process

Good planning is the first step towards a successful completion. Most of the work in the bathroom with a budget repair can be done by hand. Removing old coatings, dismantling plumbing or painting can be done even by a novice master.

But if experience in wall tiling is not enough, you should think about inviting specialists to individual areas of bathroom renovation. Do not overestimate your strengths and capabilities. Sometimes reworking your own mistakes will cost more than inviting the master initially.

When the bathroom renovation work is distributed, they move on to the choice of finishing materials. It is better to refuse well-known imported brands. A significant part of the cost is a fee for the brand, which, with a budget repair option, looks inappropriate. The cheapness of Chinese goods is also not the best option.

Advice! Stop at a domestic manufacturer or an assortment from Poland, Slovenia and Bulgaria.

This applies to both finishing materials for the bathroom and plumbing. The combination of reasonable cost and good quality - distinguishing feature offered products.

An important condition quality result when carrying out budget repairs with your own hands, the technological process is observed. If any stage of the work is in doubt, listen to the recommendations of experts, improvisation is inappropriate.

Redevelopment of the bathroom automatically increases the repair estimate at times, so there is no need to talk about the budget option. Leave your ideas for moving walls or plumbing to another place until better times, when there will be no financial constraints.

Volume preparatory work for removal old cladding depends on the choice of new materials. Sometimes this step can be avoided. Mandatory dismantling of plumbing is required if it is planned to replace it.

Wall decoration

An economical bathroom renovation includes several options for wall decoration:

• staining;
• installation of PVC panels;
• wallpapering, including self-adhesive film;
• facing with tiles from the budget segment.

Each method has undoubted advantages and some negative points.

Coloring

Wall covering with paint is the leader among economical finishing options due to its ease of execution and low cost. A competent approach when choosing paint and high-quality wall preparation is the beginning of the path to success.

Advice! It is not recommended to completely cover the walls of the room with paint.

The project is characterized by greater efficiency, where the areas near the sink and bathtub are lined with inexpensive tiles or moisture-resistant PVC panels.

Moisture resistance and antibacterial properties - mandatory conditions when buying paint, otherwise it will not be possible to avoid the development of fungus and peeling of the coating in the bathroom. High performance characteristics against the background of budgetary cost are inherent in paints:

• latex;
• acrylic;
• silicone.

The absence of a pungent odor is a definite plus of water-based formulations, and silicone paints perfectly perform the function of a hydrobarrier. It is better to refuse the use of oil mixtures. After a short time after the repair, the walls of the bathroom will be covered with cracks.

4

When renovating a bathroom economically, keep in mind that paints with an attractive glossy effect emphasize any irregularities in the walls and make any imperfections more visible. Therefore, careful alignment of the walls is necessary. The advantage of gloss is the ability to visually enlarge the space of a small bathroom.

Often, during renovations, it is necessary to remove the old paint coating from the walls of the bathroom. You can do this in several ways:

• use a drill with a special grinding nozzle;
• purchase a liquid for removing paint; in the process, you will also need a spatula and a scraper;
• use thermal methods, when the old coating is heated with a building hair dryer or burner, and the swollen paint is scraped off with a spatula.

Naturally, at the end of the removal process and before the start of staining, the whole range of measures is carried out: sealing cracks, eliminating protrusions, priming.

In the photo, a bathroom with a budget renovation with your own hands:

PVC panels

You can repair the walls of the bathroom with PVC panels. At a cost, this will cost a little more than buying paint, but the method has two distinct advantages:

• The appearance of the bathroom after a budget renovation using PVC panels, in terms of design, is incomparably better.
• No extensive preparation of the wall surface is required.

The panel installation process does not include difficult stages and available for DIY. After calculating the need for the material, the formation of the crate is carried out. For these purposes, plastic profiles with clips are used. Suitable for economy bathroom renovation wooden slats. Pre-impregnation of the material with antiseptics will protect the slats from high moisture.

Wallpapering

It has the right to exist and the option of repairing a bathroom using wallpaper, the main thing is to choose moisture-resistant products. The work is being carried out at a fast pace, the removal of the old coating is not required in all cases. There are 3 main types of wallpaper designed for use in the bathroom:

• Vinyl with non-woven base. The price is quite high, the repair will require the purchase of special glue, which is not always advisable in an economy project. But high performance is the basis of popularity among consumers.
• Washable. Compared to vinyl copies, they are less practical, the cost of the product is correspondingly lower.

  ​Remark! When repairing with your own hands, it is advisable to avoid pasting areas of the bathroom that may be exposed to water.

• Self-adhesive film. Incredible practical material, which is initially provided with an adhesive layer. A wide range of design solutions is able to create a wonderful transformation with a bathroom after renovation.

High quality and attractive appearance of self-adhesives are accompanied by 3 negative points:

• The rather high cost of the product, which may not fit into the budget repair estimate.
• Bathroom walls require careful preparation, as any flaw under the self-adhesive wallpaper will be extremely noticeable.
• Pretty complicated application process. The painstaking process takes much longer than standard pasting.

tiling

Budget repairs also involve the use of tiles in wall cladding. The main thing is to choose an inexpensive product with decent quality. Solution advantages:

• the material is resistant to temperature extremes;
• not afraid of high humidity, withstands prolonged contact with water;
• washes well;
• resistant to mechanical damage.

The following negative points can become an obstacle to using the bathroom during budget repairs:

• additionally, you need to purchase a mixture for fixing to the wall and a grout;
• walls with old paint need to be prepared, the coating must be removed;
• the process requires a certain amount of experience and not everyone can do it on their own, inviting a master will increase the repair estimate;
• It takes more time for lining than when pasting wallpaper or painting.

The best option when renovating a bathroom with a budget project is to combine cladding. The area near the bathtub and sink is tiled, and for those less exposed to water, a simpler and more economical method of coating is chosen.

Ceiling finish

The amount of work on the budget finishing of the ceiling depends on its initial state. It is enough to cover a flat surface water-based paint or whiten. A simple and quick process can be done by hand. It is recommended to remove a significant curvature or mask the communications of the bathroom with a suspended structure. Rack elements or PVC panels are suitable as a material.

The main advantages of the choice:

• affordable price segment;
• simple lining procedure;
• does not require perfect preparation bathroom ceiling surfaces;
• successfully mask wires and pipes;
• Possibility of installation of built-in lamps.

The result of the budget repair is shown in the photo:

floor covering

The finishing option depends on the renovation estimate and the condition of the old bathroom flooring. Sometimes just refreshing the look of a tile is enough. To do this, you will need to remove the grout and pick up a new one that matches the color of the tile.

It is quite simple and cheap to lay linoleum, but this measure will be temporary. Enhanced Level humidity in the bathroom provokes the development of mold on the linoleum.

Comment! To avoid negative consequences during budget repairs, the purchase of PVC-based linoleum or without a base at all will allow.

Greater practicality in the repair of the bathroom has a tile, even if it is a budget cost. Facing is carried out without dismantling the old tiles. The cost of labor and time will require a screed. To repair the bathroom floor, choose a tile with a rough texture to avoid slipping and not cause injury.

With an extremely limited budget, the most economical option would be to purchase a rubber mat large sizes, which will cover the maximum free space bathroom floor. It can be changed much more often than any stationary coating, and a fresh look of the interior at minimal cost will be provided.

The nuances of choosing plumbing

Replacement of plumbing in the case of budget repairs is not always carried out. Sometimes they stop at the option of restoring the bath. There are several ways to update:

• The inner surface is treated with a two-component polyester enamel. Most budget friendly.
• Recovery is characterized by greater durability and cost liquid acrylic.
• Sometimes both methods are unacceptable due to the deplorable state of the bath. An acrylic tab will save the situation, the fixation of which is carried out with a sealant.

Each of the methods still implies financial costs, although they will be incomparably lower than the purchase of a new bowl.

If a budget repair involves the purchase of new plumbing in the bathroom, consider the following options:

• acrylic container. Located at the bottom of the price segment. Easy installation and easy maintenance are the key advantages of the product for the bathroom. A short service life and instability before mechanical damage are the main negative features.
• Cast iron is characterized by greater practicality. The cost is higher than acrylic counterparts.
• Steel bathtubs in their characteristics are between acrylic and cast iron products.
• If the presence in the bathroom of the bath itself is not important, you can think about installing a shower cabin. But the repair will already go beyond the budget.

When replacing sinks in the bathroom, choose between hook-on or stem-mounted equipment. The first option is more budgetary, the second has more aesthetics, as it successfully masks communications. The nuances of choosing plumbing and the preference of a domestic manufacturer were discussed in the first section.

Conclusion

To embellish the interior of the bathroom after a budget repair, small trifles can. An original curtain, decorative stickers and new accessories will enliven the design of the room. Communications are not left open, they will spoil the result of even the most expensive bathroom renovation. A budget way to quickly hide the functional elements of the decor is to form a plastic box. It will take a little time and costs, but the result will be obvious.

When acquiring a new home or living in an old one for a long time, it becomes necessary to repair it. Any updates are associated with costs that even the most economical person cannot always afford. In the absence of a significant amount of money, it is not at all necessary to postpone the replacement of a damaged finish on the back burner. It would be wiser to plan a budget repair using inexpensive, but quality materials. And you should start with the bathroom, which is one of the most important rooms in the house.

Repair, like any change, begins with getting rid of the old and unnecessary. And this process can be called the most pleasant and easy part of the work: coatings that have become obsolete can be safely removed from walls and ceilings without worrying about their safety.

Cleaning of the premises is carried out in several stages:

• Disconnecting plumbing;
• Removal of old coating from walls, floors and ceilings;
• Removal of previous layers of plaster, screed and waterproofing residues;
• Cleaning the room from dirt and dust.

After getting rid of debris, all surfaces must be leveled cement mortar. Slots must be sealed with sealant.

An obligatory stage is the waterproofing of the room. For the floor, you can use a coating composition, which is applied to the screed in one or two layers.

Cheap do-it-yourself bathroom renovation: material requirements

The bathroom is characterized by a special microclimate, which leads to rapid wear of materials. Therefore, when making even low-budget repairs, it is worth choosing a finish whose performance meets the requirements.

The materials used must have the following properties:

• Resistant to high humidity;
• The presence of antiseptic additives that prevent the appearance of fungus and mold;
• Resistance to aggressive compounds used to clean the bathroom;
• Ease of maintenance.

The best option for the bathroom - smooth surfaces. Due to the absence of irregularities and various volumetric patterns, the material does not accumulate dirt on itself, retaining its original appearance for many years.

When choosing a finish, you should also pay attention to the possibility self-assembly. A simple do-it-yourself repair will cost less (approximately twice).

How to paste over a bathroom cheaply: we decorate the walls

A significant part of the costs falls on the design of the walls, which have the largest area when compared with the rest of the finished surfaces. Wallpaper is one of the options for the economy class, but before you paste over the bathroom with them, you should think carefully. This type finishes are very unstable to high humidity in the room.

Painting with a water-repellent emulsion is the most cheap way wall decorations. For finishing, a special composition is used on a polyester or acrylic basis, which is applied to the surface after it has been leveled. The paint lasts for 5-8 years.

Among the budget options, the following types of finishes also have the necessary properties:

• plastic panels;
• Ceramic tile.

PVC panels are an inexpensive material that saves not only finances, but also time. Plastic strips fastened together do not require preliminary alignment of the walls and removal old finish. The installation of the panels is quick and can be done even by a non-professional.

If you want to decorate a small bathroom inexpensively, you can consider laying wall tiles. This material is resistant to moisture and mechanical damage, has a huge number of colors. The tiled bathroom looks nice and neat. A small budget in this case will not be a problem: you can purchase domestic products that have more affordable prices.

Bathroom renovation options: how to finish the ceiling and floor

The ceiling can be decorated in the same way as the walls. For example, paint with white paint or install plastic panels. This option is the most economical and practical.

For a small bathroom ideal solution may be the installation of a stretch fabric. The cost of such a finish depends on the area of ​​\u200b\u200bthe room, so installing a false ceiling in a small restroom will cost less than other options. Especially if you abandon the idea of ​​​​a designer canvas and make it matte white.

Finishing the floor is the most important task on which the safety of using all plumbing equipment depends. That is why experts recommend that the first step is to update the waterproofing in the room, and only then repair the coating itself.

For finishing the floor in the bathroom, two materials with high durability and a variety of designs are suitable:

• Linoleum;
• Ceramic tile.

Linoleum will cost less than tiles, but if we are talking about a small bathroom or toilet, there will not be much difference in their cost. Therefore, the choice of coverage in this case depends on personal preferences. However, it should be borne in mind that the installation of linoleum is quite simple and is done by hand, which also significantly reduces costs. Having given preference to the tile, you will have to work hard with its installation. Or finish the floor with the help of a specialist.

Renovation of a small bath: updating plumbing

Buying a bathtub and sink is the biggest expense in a renovation. However, you can save even in this case. The solution to the problem will not be the acquisition of new equipment, but the restoration of the old one.

The update is done in two ways:

• Application of two-component polyester enamel on inner surface bathtubs (the cheapest option);
• Restoration with liquid acrylic (it will cost more, but the result will be more durable and beautiful).

If the bath is in a very poor condition, you can purchase an acrylic liner. This is a special insert that is attached inside the bowl with a sealant.

The listed methods may not seem budgetary, because. are not very cheap. However, in any case, it will be more profitable to restore an old bath than to buy a new one.

Quick budget do-it-yourself bathroom renovation (video)

Self-renovation of the bathroom can be carried out at almost any income. It is only important to carefully plan the whole process and acquire necessary materials. Modern market offers a variety of finishes, so choosing a high-quality coating of low cost is not difficult. The main thing is not to get carried away, trying to save as much as possible: you need to pay attention not only to the price of the material, but also to its properties.

The bathroom is one of the most complex rooms in the house in terms of repair work despite the limited space. When choosing finishing materials, you have to constantly remember about the high level of humidity. Wrong - the textures and colors of the finishes make the compact space even smaller. The question arises: how to cheaply make repairs in the bathroom with your own hands, so that it turns out right and beautiful?

Choosing inexpensive materials

Whether cosmetic repairs or a global reconstruction of the premises are planned, you can always save on materials.

1. 1. Floor. Linoleum - the cheapest flooring, especially if you choose a roll of optimal width (3-5 meters), preventing the appearance of large residues. However, the material cannot be called durable, stable humidity can lead to mold. practical solution- tiles, the most affordable are plain products.

1. Walls. Wanting to save money, you can stop at plastic panels. They cope with significant mechanical loads, are easy to maintain and install. An alternative choice that is as practical as paneling is budget-friendly plain tiles.
2. Ceiling. Inexpensive Options– suspended ceiling, covered with moisture-resistant paint. If a waterproof paint is selected, leveling with putty must be included in the estimate.

Important. It’s definitely not worth saving on plumbing if you can’t do without replacing it. The sudden failure of low-quality equipment will nullify all efforts and ruin relations with neighbors. You can choose other materials, for example, abandoning the tile in favor of a coating of textured plaster.

Preparatory work

Preparatory work includes the dismantling of old plumbing, the removal of previous finishing materials, waterproofing, leveling, laying communications. Depending on the "global" repair, this list may change.

Dismantling plumbing

Even if replacing plumbing is not included in the plans, it is best to temporarily remove the bathtub and sink before you make a budget repair yourself. It may also be advisable to remove the door.

Dismantling of coatings

An obligatory part of preparing a bathroom for renovation is the removal of old coatings.

• • It is convenient to knock down a tile, armed with a perforator. Be sure to beat off the plaster if it moves away from the wall.

• To get rid of the paint, you will need a metal brush and a spatula.
• It may be necessary to replace the screed under the tile if large cracks are present. The floor is easy to clean up to concrete base using a hammer drill or chisel.

Video guide for removing old tiles:

Attention. Be sure to assess the condition of the sewer and water risers. Replacing them after repair is a difficult task.

Surface preparation

The next stage of work combines the arrangement of a leveling screed, a primer.

• • The base of the floor is carefully dedusted, cleaned and primed.
  • To create waterproofing, a special film is needed. The material is laid on the floor with an institution on the walls.
  • An alternative to film is applying mastic with a roller or flat brush. The composition covers not only the floor, but also the lower section of the walls.
  • A leveling screed is made on top of the waterproofing.
  • A special composition is being prepared for wall plastering - 1 part of cement (M400 and above), 4 parts of quartz sand (sifted).

Advice. To make the mixture more plastic, it should be diluted with PVA emulsion, using one tenth of the volume of water in the solution.

• Perforated planks - beacons - are placed on the walls before plastering. They are mounted on tile adhesive, wood corks or cement-sand mortar.
• You can abandon the plaster in favor of finishing with drywall, not forgetting about the treatment with waterproofing mastic. Also, the walls under the sheathing should be treated with an antifungal agent.
• For fastening moisture-resistant drywall, a special glue (for example, Perlflix) or a metal profile is used.

Attention. If the decision is made to do without tiles, the choice is made in favor of plastic panels, alignment is not required. It is very important to treat the walls using a fungicide or a quartz lamp.

Laying communications

Pipe replacement is a manipulation that follows the dismantling of the old coating. You will have to decide for yourself what to do if the goal is to make repairs in a small room quickly, change or not change pipes. Leakage of old communications will make new repairs necessary.

video on replacing pipes in the bathroom:

In addition to replacing pipes, it is worth installing new electrical wiring. It is necessary to determine a place for electrical appliances, provide the required number of outlets, replace the switch and wires.

wall decoration

Tiles and wall panels are the two most economical options for.

Wall cladding with plastic

The technology of wall cladding with plastic, if you give it step by step, is as follows.

• The optimal frame for wall panels is pine timber (30 by 30, 25 by 30). To prevent rotting wood, you need to process the material special formulations before installation.
• The frame is fastened with self-tapping screws, holes with plastic sleeves drilled in concrete are pre-prepared.
• This is followed by fastening the panels, you can use a special stapler or resort to the same self-tapping screws.

Advice. Fastening with self-tapping screws or a stapler will lead to ugly bulging of fasteners. The most aesthetic option is the “liquid nails” tool.

Wall tiling

Before you do inexpensive repair, it is better to calculate the number of tiles. This may help. The top row cannot be cut; a preliminary calculation will help save on alterations.

Important. The material is calculated so that the tiles have the same width along the edges of the wall. This is an indispensable condition, without which a beautiful repair is impossible.

• Spacer crosses must be installed between the tiles. The ideal thickness for a bathroom is 3mm.
• As soon as the tile has set, the spacer crosses are removed from the joints, the surface of the walls is thoroughly cleaned with a natural dry cloth.

Grouting

The consistency of the grout should resemble warm butter. To do this, it is pre-mixed with water.

• A soft rubber spatula is best suited for grouting.
• After applying the composition, you need to wait 20 minutes, then process the seam with your finger (gloves are put on). This manipulation will deepen the seam.
• The final stage is rubbing the grout, this action should be done in an hour. It is impossible to postpone the procedure for the next day.

corner patching

There are several ways to improve the appearance of joints in the toilet and bathroom.

1. 1. The corners are rubbed parallel with the seams. The disadvantage of this technique is the difficulty that self-taught masters face when grouting. internal corners. The solution is on the tile, the seam looks careless.

Advice. Masking tape is glued on both sides along the corner. The corner is filled with grout, the composition is leveled with a finger. Then the adhesive tape is removed, the result is a smooth, neat line.

1. White silicone sealant. Manipulations are almost similar to grouting. Plus sealant - color retention.
2. plastic corners, they can be external or internal. When choosing the thickness of products, you need to know the exact dimensions of the tile.
3. Combined option. Plastic corners are used for external corners, sealant or grout for internal ones.

Important. The connection points of the tiles with the toilet and sink must be filled with silicone. This avoids the formation of dirt.

Floor and ceiling finishing

Working with the floor and ceiling is in many ways similar to the manipulations made when decorating walls. However, there are still some differences.

Floor finish

Floor tiles - the best choice for those who are interested in the question of how to make repairs beautifully and cheaply.

• The floor, leveled with a screed, is covered with tile adhesive. The recommended application area is 0.7-1 sq. m, this is due to the instant drying of most compositions.
• The tile is laid on the floor, carefully pressed against the floor and tapped with a hammer with a rubber nozzle. Direction - to the edges from the center.
• The correct laying is checked by the level before the glue dries.
• Lastly, the cut products are mounted - around the pipes, around the perimeter of the room.
• The seams are rubbed, the floor covering is cleaned.

Ceiling finish

The most budget options for decorating the ceiling - suspended structures, putty. Putty is relevant if the bathroom area leaves much to be desired, the material is applied to a concrete slab. The ceiling of plasterboard or lining is installed by analogy with the wall.

Final stage

The bathroom renovation is nearly complete. It remains only to install plumbing, accessories and furniture.

• It is most convenient to install plumbing fixtures after full completion finishing works. This will provide full access to all surfaces of the room and keep old or new plumbing from damage.
• Doors are installed after plumbing so that they do not suffer in the process of entering it. Then all kinds of hooks are attached, lighting, mirrors and other little things.

Bathroom renovation - The best way save.

In the event that you do not feel the strength to carry out the repair of the bathroom yourself, professional teams will come to the rescue, who will make repairs quickly, efficiently and inexpensively. On our website, you can quickly calculate the cost of repairing not only your bathroom, but the entire apartment.
Unfortunately the service is still running. only for residents of Moscow, Moscow region, St. Petersburg and Leningrad region:

The question of how to finish a bathroom cheaply worries many people in our country. Average salaries do not allow you to make expensive repairs in the apartment and force you to resort to a search budget option. Some of them for some reason believe that their dream cannot be translated into reality, but in reality this is not so. It is possible to achieve aesthetics, comfort, durability and safety of the planned repair, using even relatively inexpensive materials. How to do it?

Everyone knows the old saying that if you want to do something well, do it yourself. Before renovating a bathroom, many people want the whole event to be inexpensive, while at the same time wanting quality and a beautiful appearance. However, do quality repair not everyone can independently because of the lack of the right tool, free time or experience. In this article, we will look at how to inexpensively decorate a bathroom, what materials to use and learn a few useful tips from experts. Before you start planning an inexpensive bathroom and toilet renovation, you need to clearly understand what end results we want to achieve in the end. The purpose of a repair is usually:

creating a beautiful interior;

safe operation of plumbing and furniture;

creating comfort and increasing functionality;

prevention of mold and fungal bacteria;

the longest possible service life of the materials used.

Economical repairs in the bathroom can be done using inexpensive materials, while observing all of the above points, if you plan everything correctly and choose the right material.

How to choose budget building materials

Today the industry produces Construction Materials all kinds of price categories, designed for consumers of different income levels. These can be economy, standard and elite class goods. There are also very cheap materials on sale, but their advantage is only in a low price. The quality and appearance of such products do not stand up to criticism. Many works can be done independently, without involving specialists. For example, filing a ceiling with a plastic clapboard does not require any special skills. Installing plumbing is also not difficult. Toilet, bathtub, washbasin - all this can be mounted independently. It is only important not to rush, carefully study the range, calculate all the stages of the work performed, then a successful result will be ensured.

As for building materials, it is more expedient to choose goods of an economy class and a standard price segment. Both of these types of materials practically do not differ in quality. The same manufacturer may produce similar products under different brand names. The first will be considered a standard class product, and the second - an economical option, and they will differ only in cost. World standards provide for certain quality criteria, for example, the density of building mixtures for solidification must not be below a certain threshold. For economical materials, this indicator will be closer to the lower value. This statement is true in relation to consumables. As for finishing materials, plumbing fixtures and other things, the low price is not at all the same as poor quality. It is only necessary to take into account the mode of loads to which the product will be subjected. For example, floor tiles should be stronger than wall tiles. At correct selection and installation tiles in the bathroom can last more than fifteen years. If you have decided to carry out a budget renovation of the bathroom, you should not purchase building materials of elite classes. Their quality is not higher than that of budget products, and they benefit only due to their aesthetics. It should be understood that expensive is not always high quality, and vice versa. The high price may be due to, say, the possibility of application in special situations, while your conditions do not require such dedication. The significant remoteness of the store from the production facilities of the producing company can increase the cost. Sometimes you have to overpay for a well-promoted brand. One should not exclude the difference in living standards in different countries- if a product is produced in a state with high average incomes of the population and high salaries for all employees, then residents of all other countries are forced to dump themselves on this sky-high salary if they want to buy specific products. In general, to finish the bathroom cheaply, you should approach the task wisely.

Wall finishing materials

1. Usually under good repair bathroom most imply tiled finish. Pros: Aesthetics and durability. A variety of textures and shades gives almost endless scope for design solutions. In addition, the tile is not afraid of almost any external influences and can serve almost indefinitely. Minuses: This material is the most expensive. And not only because of the cost of the tile itself, but also due to the complexity of the preparatory work. The walls will have to be properly cleaned and leveled. In addition, the laying of tiles itself is an expensive and time-consuming process, requiring special skills.

2. Another option: coating with moisture-resistant paint or a special self-adhesive film. Pros: Profitability. Minuses: Even more thorough cleaning and leveling of the walls will be required, as the slightest irregularities will catch the eye. But even with the most scrupulous approach, the appearance of such a coating will be very far from perfect. Yes, and these materials will not last long. 3. Inexpensive and very practical option - PVC panels. Pros: The choice is huge, you can choose a design for every taste. You can mount them on the walls on "liquid nails" or a special crate frame. In the first case, again, you will need to level the walls, and it will not be easy to replace the panels if necessary. But the second option does not require any special preparation. Plastic mounting strips are attached to the walls, and on them - with the help of special clips - the panels themselves. Even a non-professional can easily and quickly cope with this task. PVC panels are not afraid of constant humidity and are easy to clean. Minuses: They do not withstand serious mechanical damage. The cheapest can take a long time to publish bad smell, and over time - turn yellow, so it's better to choose not the most "penny".

Dismantling of the old cladding

Do not forget to take out all the furniture from the bathroom, remove the mirrors, seal the faucets with masking tape, and cover the plumbing with film or newspapers, because preparing the walls for painting is the dirtiest and most time-consuming step. The first step in a bathroom renovation is to remove the old wall and floor cladding. It is done with a hammer and chisel. Thus, old tiles and plaster are removed, preparing the walls for renovation. It is very important to purchase a special putty designed specifically for the walls and ceiling of the bathroom. This putty contains a special disinfectant composition that prevents the appearance of fungus due to high humidity. In order for the putty to be convenient to work with, it must be fresh and of high quality. After the walls are leveled and dried, decorative plastic panels, mosaics or tiles can be used. The ceiling is carefully leveled for subsequent painting. It's not scary if a little putty remains, it can be stored for several months in a closed container. You should not apply new layers of paint over the old peeling, nothing good will come of it. If you have a drill in your arsenal, get a couple of sanding attachments for it and clean off the old paintwork from the walls. Remember safety precautions. Use paint strippers, a scraper, and a spatula. The method is effective, but it is better to work in a respirator and gloves made of thick rubber.

You can remove the paint by thermal methods, for example, using a burner or a building hair dryer. Heat the wall section and scrape off the peeled coating with a narrow spatula. When all old paint will be removed from the walls, it is necessary to repair cracks and potholes, knock down ledges.

DIY wall painting

Wall painting is considered one of the easiest and least expensive ways to finish. It is important to choose the right paint and prepare the surface of the walls. Bathroom paint should have antibacterial properties and be moisture resistant. Otherwise, the appearance of fungus and peeling of the coating cannot be avoided. Due to their low cost and excellent performance, latex, silicone, and acrylic paints are most widely used. At the same time, water-based mixtures do not have an unpleasant pungent odor, and silicone paints can act as a hydrobarrier. Traditional oil paints deprived of such dignity, and also quickly covered with cracks, so it is better to immediately refuse this option. When choosing shades, remember that it is inappropriate to paint dark colors in small bathrooms, as this will visually reduce the space even more. Do not overdo it with the number of bright spots or complex patterns and their number so that the interior does not look vulgar. Soft pastel colors will visually expand the room and fill it with light.

Please note that paints can be matte, glossy and semi-gloss. Of this variety, it is matte enamels that hide small defects on the walls best of all, while drops and streaks are clearly visible on glossy surfaces. However, if you can't make a choice, consider combining glossy and matte finishes. This technique will make the bathroom modern and stylish without significant costs.

Wall tiling

When discussing how to cheaply renovate a bathroom, with a budget repair, you probably will not consider expensive Italian high-strength tiles with a non-slip coating and the ideal geometry of each product. Here it is also important to take into account the policy of manufacturers, which is similar to the situation with the glue described above. Considering cheap repair bathroom, we do not take into account elite tiles made of special grades of clay with all kinds of additives and additives, but look at budget or middle-class products. In the vast majority of cases, the tile of the middle or low price category does not differ in any way in its composition. Inexpensive bathroom decoration from cheap tiles is only different appearance glaze. Of course, products of the middle category have a wider range of shades and a variety of texture solutions. In this case, when repairing an economy class bathroom, you should not chase after a chic appearance, you can get by with more restrained solutions, but beat them very worthily.

To work with this material, you also need a special tool, certain theoretical knowledge and, of course, practical experience. To make repairs in the bathroom yourself using tiles, without having the necessary knowledge and tools, of course, will not work.

Decorative plastic panels

When renovating a bathroom, the largest costs usually go to the purchase of tiles and work on wall and floor cladding. As an alternative to ceramic tiles, decorative plastic panels can be used. This is a great way to economically update the bathroom and get a very presentable interior. Calculate the number of panels needed, make a margin of 5-10%. If there is little experience, but the bathroom has a lot engineering communications, to close which you need to trim the panels, then take a margin of 10%. At the same time, estimate the number of starting profiles, external and internal corners. They are sold in a standard dyne, they cost a penny, there is no need to save. The panels are attached to a special crate, which is drilled to the walls. Due to the ease of processing, the panels do not cause much trouble home master, and their installation rarely takes more than a day or two. We fix the elements in the same plane: 1. Check the condition of the wall with a plumb line, pay special attention to the attachment points plastic profiles or rack. 2. Fix the two extreme elements under the level, re-check their position. If there are large recesses at the place where the profiles are attached, then use linings made of various materials. The dowels must attract the profile over the entire plane; there cannot be a gap between it and the wall at the attachment point. 3. Pull the ropes between them, two are enough at the ends of the profiles or rails. 4. Install all other profiles under the rope, use it to control the position of the rails. Then, along the perimeter of the room, a decorative plinth is attached to the floor and ceiling, which can mask the possible flaws in the cut edges of the panels.

Wall decoration with wallpaper

For wallpapering, you can use only waterproof types. This method of finishing has a number of undeniable advantages. Low cost makes it possible to have an exclusive and reliable coverage with small material losses. High technology. Among all possible ways wall decoration in the bathroom wallpapering is the easiest. The work is carried out within a few hours, the room can be used for its intended purpose the very next day. It is possible to frequently change the design of the premises. In some cases, re-pasting can be performed without removing the old one - the repair time is significantly reduced, and the amount of construction debris is minimized. The disadvantage is that in terms of physical strength, wallpaper is inferior to traditional materials. But, if you behave carefully and avoid mechanical damage, then the period is calculated for many years. In addition, defects on the wallpaper are easily eliminated, after pasting there will always be a small amount of materials left. Don't throw it away, keep it "just in case" for repairs. Wallpaper for pasting the bathroom must be moisture resistant. During the purchase, pay attention to physical strength, and it depends on the material of manufacture. Non-woven vinyl - the most modern, have high mechanical strength, can have a long direct contact with water. Available in a wide range color solutions, can be plain or with various patterns and ornaments, with a structured or smooth front surface. Disadvantages - relatively high price, the need to use special glue.

Washable - a cheaper segment, inferior to vinyl in terms of performance. It is recommended to use on wall areas that are not exposed to water splashes. Self-adhesive - made of a special polymer film, have a huge number of design solutions. Disadvantages - relatively high price and complexity of finishing. In addition, they can only be used on perfectly flat surfaces.

How to decorate the ceiling

The easiest and cheapest way is puttying and painting. However, if there are significant irregularities on the ceiling, it will be almost impossible to achieve a good result. Over time, the paint may darken, or even peel off, even with a small leak, the ceiling will be hopelessly damaged. Installing built-in lighting will not work - only pendant lights will be available to you. A more practical option is the same PVC panels or suspended rack ceiling. The latter are made from steel, aluminum or plastic rails and are often sold as ready-made kits - along with the frame and mounts. Such ceilings are inexpensive, durable, easy to install and operate and are suitable for almost any bathroom.

Stretch ceilings are becoming more and more popular. To install them, you will have to call professionals with special equipment, but as a result you will get not only a perfectly smooth ceiling, but also reliable protection from leaks: stretch ceilings withstand from 70 to 120 liters of water per square meter. True, this option is not suitable for those who have a geyser installed in the bathroom.

How to cover the floor?

The cheapest option is linoleum. It is not difficult to lay it, but in no case should moisture get under the coating, otherwise mold will begin to multiply there, an unpleasant smell will appear. Therefore, linoleum must be glued to the floor, and the seams must be treated with silicone sealant. At correct styling this material has one drawback - a very conditional "beauty". Universal option - ceramic tile or porcelain stoneware. They can be chosen for every taste and budget. There are practically no shortcomings of this material, except, perhaps, ubiquitous distribution.

Fans of more original solutions choose moisture resistant laminate or screed floors. However, the first option has too low moisture resistance and quickly fails, and the second is too expensive and difficult to install.

Bathroom lighting

Pay attention to lighting options. Properly thought-out lighting, installed in the right places, can turn the most ordinary-looking room into a masterpiece of design art. An economical bathroom renovation does not involve laying hidden wiring in the walls or LED lighting. But you can install wall lights so that they visually narrow or expand the room. Budget finishing of the bathroom provides dropped ceilings from plastic panels in which spotlights can be installed, they will highlight advantageous places, divide the room into functional zones and hide unnecessary structural or design flaws.

Plumbing in the bathroom

It is important to remember one simple rule. Plumbing and its important components are not the things you can save on. If there are problem areas, leaks or other temporary defects in the water supply system, then they must be eliminated. Also, low-budget repairs in the bathroom quite allow complete replacement siphons and mixers. An old cast iron or steel bathroom can be insulated mounting foam and update the enamel coating. If there are cracks or chips in the washbasin, it is better to replace it with a new, inexpensive sample. The cheapest bathroom renovation can be done without even changing the sink or toilet with old cracks. For these purposes, there are many modern materials, which can repair cracks, renew the coating, or in some cases simply clean it of old plaque.

Before you cheaply renovate a bathroom, do not forget about the market rows, where you can find many used products in excellent condition, while at prices significantly lower than market ones. They come to the market from construction organizations that, when renovating an economy class bathroom at other sites, simply dismantle the old plumbing and put it on the market for sale. There, worn parts such as gaskets in mixers and valves are replaced, and then sold at significantly reduced prices.