How to update an old door with your own hands. How to update a door: original ideas. Original ideas for decorating doors

A modern interior door is not only sound and heat insulation of a room. This is a full-fledged element of the interior, which plays an important decorative value. This is probably what manufacturers are doing. building materials by setting prices on doors. No, not that they are too high, but not at all low. But you really want all the details in the interior to match each other. For those who do not own extra material resources, but have good taste, imagination and a great desire to decorate their lives, we will tell you how to finish interior doors with your own hands. Please note that, most likely, in addition to the doors themselves, your attention will also be required door slopes and, of course, the doorway.

Preparing interior doors for finishing

Regardless of which particular finishing method you like, the surface door leaf need to prepare. In the process of work, you will need: high-quality adhesive composition, tracing paper and some object used as a press. First of all, the door leaf must be removed from the hinges and carefully checked for lagging places, cracks and voids. The exfoliated areas of the surface must be carefully and accurately covered with glue, covered with tracing paper on top and pressed down with a press. Small voids and cracks are also excellently eliminated with an adhesive solution. In the case of deep cracks, you will have to tinker a little longer. They are usually filled with fine sawdust mixed with furniture varnish or construction adhesive.

Ways to finish interior doors

The simplest ways to finish interior doors are:

painting;
varnishing;
staining;
veneering;
decoupage;
craquelure.

Door painting

Finishing interior doors by applying paint to it is the most commonly used way to update the door leaf. The work uses aqueous solutions of organic or synthetic dyes. The result of this coating is an updated, brighter appearance of the door. The solution must be chosen, focusing on the original color of the wood.

Opening varnish

For varnishing doors, masters of all trades prefer parquet varnish or Polish Lakobeits. Both options spread well and penetrate deep into the wood. Lakobeyts has an additional plus - this composition combines both varnish and a tinting base. The coating can be applied by brush, roller or sprayer. However, experts recommend the first option, arguing that when the brush moves parallel to the door fibers or structure, the varnish is applied more evenly. To obtain a more aesthetic result, the door leaf is opened twice.

Staining

Quite often, when finishing the same door leaf, it is first treated with a stain, and then varnished. Staining allows you to achieve the desired shade of the door, and varnishing enhances the brightness of the texture. Subsequent sanding gives the canvas a matte finish. If the matte surface for some reason does not suit you, then after grinding it is necessary to polish and dry. As a result, the interior door acquires a mirror shine and practically does not differ from those on the shelves.

With the help of veneering, old doors made from shavings, sawdust or low-value wood can gain new life and look like an expensive, elegant, high-quality product. The main requirement is a thorough preparation of the canvas, namely: grinding. The veneer is directly pasted across the fibers or diagonally.

Vinyl sticker decal

If you do not consider yourself to be a jack of all trades, choose the simplest and cheapest option for decorating an interior door with vinyl stickers. This method is especially good when you just need to hide a scratch or minor damage to the door leaf. Armed with a soft cloth, hair dryer and clerical scissors, you can update the door in a matter of minutes. Treat the surface before applying vinyl. There should be no dirt or grease.

Next, you should carefully align the sticker and separate the pattern from the substrate on which it is attached. The image itself is glued like wallpaper, which is carefully smoothed with a napkin in order to avoid the formation of bubbles. 10-15 minutes after the vinyl has occupied the area of the door allotted to it, carefully, slowly, so as not to damage the pattern, remove the mounting film covering the sticker. If the film does not come off well, warm it up a little with a hair dryer. With the help of a hair dryer, annoying vinyl stickers can be easily removed from any surface.

Decoupage of interior doors

The decoupage technique for interior doors is not much more complicated. Diligent hostesses will be able to make such a finish on their own, since the door leaf can not even be removed from the hinges.

Door preparation in this case is standard - washing and drying. Further, in order not to stain the adjacent space, you can stick adhesive tape around the perimeter of the opening. The door leaf is carefully primed, rubbed with ordinary paraffin candles and is dyed. Now we turn to gluing decoupage cards, which must first be held in cool water for 5-10 minutes. Before gluing, the remaining water must be removed with a napkin, then carefully apply PVA glue as on inner surface drawing, and on the door itself.

After the card has taken its place on the door leaf, you need to carefully check the result for the presence of wrinkles and bubbles, since then such defects cannot be corrected. When the drawing is completely dry, its edges are treated with a thin layer of white putty, the excess of which is carefully removed with sandpaper. Artificial light scuffs can be made on the edges of the canvas and trim to make the door look retro.

The second, more economical option is to decorate the door with elements cut from napkins. They are selected to match the room, glue is applied to the door and the same is done with the fragment. Napkins are glued to the doors, smoothed, allowed to dry, after which they cover the door with acrylic varnish.

Craquelure

Similar decoration of interior doors - original version perfect for lovers of antiques. Given that such a finish is rare, your interior will be more than original. The craquelure technique involves applying two layers of varnish. In this case, varnishing compositions need to be selected different in consistency and drying time. The surface of the door leaf for craquelure is prepared in the same way as when decoupage or gluing vinyl stickers, i.e. cleaned and degreased.

First, craquelure varnish is applied. After the first layer has completely dried, a specially aging varnish containing bitumen goes on top of it. Bitumen is used to enhance the effect and more clearly highlight cracks on a light base. For dark surfaces use acrylic paint. The technology described above is considered the best.

In order to simplify the process, you can use a one-component craquelure varnish, which is covered with a contrasting paint on top. And for those who prefer cheaper options, instead of craquelure varnish, you can use PVA glue, vinegar, gelatin, and even egg white.

Door leaf decoration

You can change the look of the old interior design in other ways that are not related to the use of paints.

Photowall-paper - special wall-paper for doors, the installation instruction is applied to a product. Disadvantage - there are only standard sizes, and they can only be used on a flat door leaf without panels.

Vinyl or paper wallpaper- can be glued both on the entire surface of the canvas, and only on the panels. If door structure double-leaf, it is recommended to choose a symmetrical pattern.

Fabric - glued as an appliqué, on a panel, or in fragments, imitating patchwork. You should pay attention to the fact that the glue does not leave stains on the surface of the fabric when it dries.

Finishing the opening of the interior door

We have already figured out how to give new life to an old interior door. But, you see, the openings also need to be put in order, otherwise updated, beautiful door will just look out of place.

Sections of the article:

The door is an interior detail that constantly experiences high loads. Naturally, after a while, the former aesthetic appearance the door leaf is lost. Various defects appear on the surface - scratches, cracks in the paintwork, dents, marks from dog teeth and claws. And if buying new doors is not an option, you should start restoring old doors. What is this process, what tools and materials are needed - we will tell in our article.

The restoration process is quite complicated, but quite feasible. There is a mass simple options restoration of interior doors.

Necessary materials and tools

Depending on what type of door has become unusable, a certain set of materials and tools should be prepared for restoration work. So, you definitely need antiseptic impregnation, varnishes and stains, paint removers, wood paint, putty and primer.

This is about materials. Now let's see what we need from the tool. These are an electric drill, a set of spatulas, chisels and screwdrivers, a carpenter's knife, a roller, brushes, emery cloth, nails and a hammer, pliers, glazing beads, door fittings and a building hair dryer.

Restoring a wooden door

Solid wood door panels natural wood worthy of praise - these are reliable, environmentally friendly products that have a very aesthetic appearance. But such structures are very cumbersome - it is very difficult to restore them. However, subject to the technology of restoration work, the result is worth the effort. Natural wood lends itself well to restoration.

Preparation

The old door must be removed and laid horizontally on the most even plane. If the canvas has upholstery and glass inserts, they should also be dismantled. Next, you need to move on to removing the paintwork - usually there are several layers of paint on such canvases. To remove the paint easily and quickly, you will need a building hair dryer - the coating is heated until it is swollen, and then easily removed with a spatula. Residual paint can be removed by sanding.

It is important in the process of warming up the door leaf not to overheat it. As a result of overheating, wood can change its natural color. It is best to remove the paint outdoors or in a ventilated room.

On final stage preparatory work the entire canvas must be coated with a primer.

The main stage of restoration work

The first step is to carefully examine the canvas - it often happens that after the preparation process there are some minor flaws. To eliminate them, you can use putty. Based on the state of the door leaf, it is processed partially in places of defects or completely. Then, after the putty has dried, it is polished. Grinding is a rather delicate process, it should be treated with all care. A surface is well polished only when there are no traces of processing on it.

After grinding, dust and dirt may remain on the canvas. Before painting the product, the surface is thoroughly cleaned. It is desirable to apply paint in two steps - at the first stage, the canvas is covered with enamels, then they go directly to staining.

First of all, the color of the future door is selected - it is recommended to use stains. They can be either water or oil based. Stain or enamel should be applied through an airbrush, but brushes and sponges can also be used at home. Clots of stains and enamels should not be left on the surface - this can affect the color of the entire door leaf.

Paint or varnish is applied with a roller with a short pile length or with a brush. If it is a brush, then it should be of high quality and better if it is made of artificial material.

Last step

At this stage, it remains to install the door leaf in its rightful place. But the process is not limited to not only hanging the door leaf on the hinges with subsequent alignment. Sometimes the door frame is reinforced with reinforcing bars or anchor bolts. These manipulations are performed with the door closed. After installation, the gaps between the box and the opening are filled with mounting foam.

The process of restoring lacquered door panels

Let's look at how you can restore an old lacquered door. The first step is to remove the old coating. The door is carefully processed with sandpaper, and then polished in the direction of the wood fibers.

It is better to apply a new varnish with a flute brush or a foam swab. Lacquer is applied in at least four layers intermittently. The second layer can be applied after 2-3 hours, but all the rest - in a day. All this time the room should be very well ventilated.

The resulting surface is then necessarily polished - since this process is quite laborious, it is recommended to use a grinder with a felt or felt polishing nozzle.

Restoring veneered doors

The first step is to measure the surface of the door leaf and cut the harvested veneer. Then glue is applied to the canvas and allowed to absorb for 10 minutes.

If the door is not even, then it needs to be leveled - for large irregularities, a planer is used, for small ones, you can get by with an emery sheet. If there are chips or cracks on the surface, they are restored with putty.

For gluing veneer, an iron is used, the heating temperature of which is not higher than 50 degrees. After the veneer is heated, the surface is fixed by lapping. After that, it is necessary to press down the structure with a heavy object. It is important to carefully control the gluing process so that no voids form under the veneer.

Laminate can be glued in the same way, however, liquid nails should be used to fix it.

This method of restoring an old door has advantages - it is a rich choice of veneer, its long service life, as well as an acceptable cost. But such a coating is very sensitive to humidity and temperature changes.

Restoration of solid wood doors using MDF panels

The restoration process is very, very simple. MDF panels suitable for the style of the interior are glued onto the old door leaf. This is a popular method and it also has some advantages - for example, these panels look very aesthetically pleasing, withstand moisture and mechanical damage. Among the shortcomings - the panels wear out in those places where they are often affected.

Restoration of doors from fiberboard

The technology for restoring such door panels is slightly different from working with solid wood door panels. These differences are not very significant, but you should still know them.

Some sources indicate that a blowtorch can be used to remove a layer of paint - no, it just should not be used. Only an iron or a building hair dryer is allowed. For grinding work, it is allowed to use only fine sandpaper - the surface of fiberboard is quite thin. It is possible to slightly change the surface relief with the help of decorative elements - it will imitate a paneled canvas. Then, after grinding, the entire door structure is painted.

There is another option. In this case, the surface will look like natural solid wood - for this, the surface is simply glued with veneer. How to restore in this way old door above. After the work is completed, the door will simply not be recognized - everyone will think that it is made of real natural materials.

There are more complex ways, but for them you need to have certain skills. For example, a blind door can receive glass decorative elements. To do this, mark the place for future inserts, and then make a cutout using a jigsaw. The resulting space is reinforced with slats. How the inserts will look like, how many there will be - depends only on the imagination of the master and the style of the interior.

Door frame and fittings

These door elements also need restoration work as sharp as the door itself. In addition, the fittings should be replaced. Experts recommend completely replacing the hinges to match the color of the restored door leaf, handles and lock. It is recommended to purchase only high-quality products - the service life and ease of use of doors depend on their quality.

Many home masters are sure that you can simply purchase and install new box- but it's not. Doors that have been used for a long time have some deflections in various directions. When changing the box, you can only increase the gaps - this will not look aesthetically pleasing.

As you can see, the restoration of old doors is possible. This is not a difficult process that you can do yourself. The materials that will be required during the manufacturing process can be purchased at construction hypermarkets - often, their price is quite affordable. Such restoration allows significant savings - after all, even the simplest economy-class interior door costs from 4,000 rubles. In addition, old doors are high-quality products made of natural and solid wood, and after restoration they will look perfect.

The nuances of the restoration of the old door with your own hands. Ideas and methods, photos.

A person associates his home with a place of rest. Therefore, he tries to create coziness, to choose an interior and a pleasant color scheme to fully implement it.

On the other hand, everything in our world tends to become obsolete and collapse. Our homes and their interiors are no exception.

Updating something around us, we awaken creative energies in ourselves, we feel creators.

Although most species internal works require special in-depth knowledge and skills to perform them, update interior doors on our own, we are quite capable.

Let's talk about the features and methods of reconstructing old doors in more detail.

How to make a new one from an old door with your own hands: options, photos, tips

photo of an old door before and after restoration using decoupage technique

It is important to prepare it before updating the old door:

remove the doors from the hinges and lay on a flat horizontal surface
fold all accessories separately or prepare for disposal if it has become unusable
if there are glass elements, carefully remove the glazing beads and then remove the breakable parts
if the door has been treated with paint, turn on the building hair dryer and gradually warm up its surface
arm yourself with a piece of coarse sandpaper and remove the bubbles old paint
replace the paper with another one with a finer abrasive and again go over the entire surface of the door
carry out the final grinding with sandpaper with minimal abrasiveness
treat the surface of the door with a special putty for wood products
after complete drying, clean the doors in 3 steps with sandpaper of different abrasiveness
fix the result with drying oil or stain
then carry out those types of work that are necessary to update the appearance of the door
if there were glass elements in it, put them first and then new glazing beads for a fresh color / design

As examples, look at the options for updated doors in the photo.

embodied ideas for decorating and restoring an old interior door, example 1

embodied ideas for decorating and restoring an old interior door, example 2

embodied ideas for decorating and restoring an old interior door, example 3

embodied ideas for decorating and restoring an old interior door, example 4

embodied ideas for decorating and restoring an old interior door, example 5

embodied ideas for decorating and restoring an old interior door, example 6

embodied ideas for decorating and restoring an old interior door, example 7

embodied ideas for decorating and restoring an old interior door, example 8

embodied ideas for decorating and restoring an old interior door, example 9

embodied ideas for decorating and restoring an old interior door, example 10

embodied ideas for decorating and restoring an old interior door, example 11

embodied ideas for decorating and restoring an old interior door, example 12

embodied ideas for decorating and restoring an old interior door, example 13

embodied ideas for decorating and restoring an old interior door, example 14

embodied ideas for decorating and restoring an old interior door, example 15

embodied ideas for decorating and restoring an old interior door, example 16

embodied ideas for decorating and restoring an old interior door, example 17

embodied ideas for decorating and restoring an old interior door, example 18

embodied ideas for decorating and restoring an old interior door, example 19

embodied ideas for decorating and restoring an old interior door, example 20

embodied ideas for decorating and restoring an old interior door, example 21

embodied ideas for decorating and restoring an old interior door, example 22

embodied ideas for decorating and restoring an old interior door, example 23

embodied ideas for decorating and restoring an old interior door, example 24

embodied ideas for decorating and restoring an old interior door, example 25

embodied ideas for decorating and restoring an old interior door, example 26

How and with what you can update the color of old wooden doors: ideas

girl paints an old wooden interior door with white paint

After you have completed the restoration work on the surface of the old interior door, choose a new color for it.

Among the ways that can help you in this moment, we note:

Painting with stain, paint or autopsy wooden surface varnished doors.
Remember, for best results, brush along the fibers, then all the cracks will be filled with a coloring matter.
Accents on moldings, or painting the protruding parts of the door with contrasting or similar colors. In the absence of such elements, glue them from wooden or polyurethane slats and paint.
Artistic painting, coloring through stencils.
The method is suitable for creative owners who want to bring originality to their interior.
Pasting wallpaper, large drawings on paper, pieces of fabric. Decoupage.
In this case, follow all the requirements for fixing the material on the surface of the door - soak it with water, glue, and process it from above with a jet of hot air.
Stained glass painting on glass.
If you are good at drawing or stock up on interesting stencils, buy special stained glass paints and decorate the glass elements of your old door.
Sticking vinyl stickers.
Note that this method saves you time preparing the old door. In other words, you can not even remove it from the hinges, but immediately glue the vinyl elements.

How and with what can varnished doors be updated?

man takes off his old lacquer coating from doors for their restoration according to a new design

To carry out restoration work, remove the old varnish from the door in one or more of the following ways:

sandpaper
grinder
chemical solvent

The first method was discussed in the previous section. The second method will significantly speed up the process of removing the old varnish coating. And the third one has one caveat - the varnish can remain selectively on the door leaf. Therefore, be sure to polish the latter.

After removing the old layer of varnish, sanding and drying the doors, decide on their new design, for example:

apply new varnish or laminate,
paint in desired color,
paste wallpaper / photo wallpaper or other self-adhesive tape with imitation, for example, under natural wood,
apply freehand painting, copying a specific drawing, or under a stencil,
decorate the door by gluing loose cereals - rice, buckwheat. Be sure to apply a layer of varnish on top to better fix the material.

How and with what can veneer doors be updated?

photo of renovated old veneer doors

One of the most common problems with veneer doors is bulging of the leaf in some areas. Therefore, first prepare it, carry out restoration activities before updating.

To eliminate the problem of swelling of the canvas will help:

Iron.
Heat it on medium and iron the swollen surface of the door, folded on a horizontal stand.
Wet rag.
Moisten a cloth flap with water and spread it on the problematic surface of the door. After a quarter of an hour, remove and wait for drying.
PVA glue.
Draw it into a syringe and gently insert it under the swollen surface of the door. Smooth the area with a dry cloth.

To eliminate cracks and chips on the old door of the material in question, stock up on strips of veneer of a similar color.

Cut out the strips corresponding to the parameters of the repaired surface.
Cut off the excess with a scalpel after applying to the place of the chip / crack. At the same time, keep in mind that the fibers of the patch should be perpendicular to the restored door.
Treat the door leaf with a special putty and wait for it to dry completely.
Use double-sided adhesive tape to secure the veneer pieces.
Sand the joints.

When your old door has only minor scratches and chips, wax them:

liquid
pencil

In the first case, put a couple of drops into the rift and immediately walk with a dry rag to remove excess. Before doing this, be sure to clean the door of dust and dirt, and also grind the surface.

In the second, tear off a piece from the wax pencil, knead it in your palms and stick it on the problem area. Wipe off the mark with a rag. Do this only on a previously cleaned and prepared door.

To update the prepared old veneer door will help you:

If you masked chips and scratches on the door with wax, then remember that varnish and paint will not cover them. Or linger on it for a short time, and then crumble.

How and with what can panel doors be updated?

old panel doors after paint renovation, decor options

Paneled doors in the interior look interesting. However, it is not always convenient to process their frayed surface. We will not go into details. Let's take a look at restoration options.

Successful solutions:

painting in several colors with highlighting protruding places
wallpapering in segments, adhesive tapes along the contour, on panels
decoupage of individual segments
varnishing

The cardinal method is the analysis of door panels and replacing them with laminated hardboard. To do this, you sheathe the door frame with it and especially carefully select the color when gluing its ends.

If there is glass in the door, decorate it with special paints or imitate a stained glass window. Stencils for decoration are also suitable.

How and with what it is possible to update the doors covered with paint?

man painting old previously painted interior doors

Your first task is to remove the old paint from the doors and prepare them for restoration work. Their sequence:

decide on the location of the door in space - either lay it on horizontal supports, or remove it from the hinges and leave it vertically,
go over the entire surface with a spatula and remove a layer of old paint,
sand with sanding paper
treat with a special primer for wooden surfaces,
let dry and sand again

Seal the areas of the door that you do not plan to paint or varnish.

How and with what can paper doors be updated?

updated paper doors in the interior

Renew paper doors with lightweight materials that will not weigh them down and provoke leaf breaks. For example:

self-adhesive film
decoupage
gluing individual elements, for example, paintings, three-dimensional drawings
painting with paints
stencils

How and with what you can update an old door frame: ideas, photos

a man measures the level of the door frame in the process of its restoration

The restoration of the door frame should be remembered when you are updating the old door leaf. Of course, fiddling with the first one is less convenient, since it will not work to remove it.

The door frame processing technology is similar to those discussed above for doors. Choose carefully the shades of paint and stain, as well as the color of the self-adhesive tape, wallpaper, so that this area on the wall is in harmony with the updated door leaf.

Below are a number of interesting door frames after restoration with their own hands.

updated door frames to match the interior and doors, example 1

self-adhesive door frame decor elements, example 2

self-adhesive door frame decor elements, example 3

How and how to glue the door beautifully?

beautifully glued interior door after renovation

Among the common ways to decorate an old door is to stick a new coating in whole or in fragments.

For this you will need:

textile
leather and its substitutes
photo wallpaper
metal rivets, beads
patchwork
cut fragments of a picture, for example, maps of the world

To stick this or that material, select an effective adhesive, for example, PVA glue, special for wallpaper, adhesive tape, double-sided self-adhesive tape.

How beautiful to wallpaper the door?

the old door after the renovation is pasted over with wallpaper

The main thing is to follow the technology of wallpapering.

First, prepare the door leaf for the update. The technique was presented in the first section of the article.
Decide on the color and texture of the wallpaper.
Apply special wallpaper glue to the surface of the door and attach the paper decor element.
Smooth the result with a dry rag.
Trim the protruding edges with a utility knife.
Wait until the wallpaper on the door is completely dry.

Decorate as you wish:

molding
designer chips, for example, small shells and a cut net, glued on top and covered with paint

In addition to the usual wallpaper, popular:

photo wallpapers with the image of three-dimensional objects / paintings
decoupage
self-adhesive tapes

How to update an outdated metal front door?

old metal Entrance door after update

Metal doors also tend to become morally and physically obsolete. Having set out to update them, keep in mind that the approach and methods will be different for the external and internal parts of the front door.

So, the following solutions will update the interior:

drawing with a stencil
art painting
full door mirror
leatherette upholstery
self-adhesive film
laminate

And for the outside of the door are suitable:

MDF panels
laminate

To fix any material on the surface of a metal door, you will need an adhesive liquid, for example, liquid nails when working with a wooden coating.

How to beautifully decorate an old door for a nursery: ideas, photos

do-it-yourself door in the children's room

Children's room is an area of creativity, leisure and intellectual work of the child. Consult with him before you begin to update the door to the nursery.

Better yet, involve the child in the process.

For inspiration, let's add a number of ready-made door decor solutions to the children's room.

options for decorating doors to a nursery after updating them, example 1

options for decorating doors to the nursery after updating them, example 2

options for decorating doors to the nursery after updating them, example 3

options for decorating doors to the nursery after updating them, example 4

options for decorating doors to a nursery after updating them, example 5

options for decorating doors to the nursery after updating them, example 6

options for decorating doors to the nursery after updating them, example 7

options for decorating doors to the nursery after updating them, example 8

options for decorating doors to the nursery after updating them, example 9

options for decorating doors to the nursery after updating them, example 10

options for decorating doors to the nursery after updating them, example 11

options for decorating doors to the nursery after updating them, example 12

options for decorating doors to the nursery after updating them, example 13

How to beautifully decorate an old kitchen door yourself: ideas, photos

renovation of an old kitchen door with mosaics

In order for the door to the kitchen to change after restoration, choose the concept of its decor. It can be:

painting
varnishing
decoupage
gluing wallpaper and any adhesive surfaces
art painting and stencils
stained glass elements
mosaic and gluing loose, small elements

Implemented ideas with updated doors to the kitchen, see below.

embodied ideas for the restoration of an old kitchen door in the interior, option 1

embodied ideas for the restoration of an old kitchen door in the interior, option 2

embodied ideas for the restoration of an old kitchen door in the interior, option 3

embodied ideas for the restoration of an old kitchen door in the interior, option 4

embodied ideas for the restoration of an old kitchen door in the interior, option 5

embodied ideas for the restoration of an old kitchen door in the interior, option 6

embodied ideas for the restoration of an old kitchen door in the interior, option 7

How to beautifully decorate an old bathroom door: ideas, photos

options for updated doors to the bathroom in the interior

The bathroom is a special place in any home. Here we restore beauty and relax after working days. I want the door to it to have its own style.

If you are currently updating it, consider these ideas:

drawing through a stencil
self-adhesive film
imitation of stained glass and paneled elements
combination of colors when staining fragments
mirror interior
photo wallpaper

For more details, see the implemented ideas for decorating the bathroom door in the pictures below.

bathroom door design options after do-it-yourself renovation, example 1

bathroom door design options after do-it-yourself renovation, example 11

bathroom door design options after do-it-yourself renovation, example 12

So, we examined the features of the restoration of the old door in the house on our own. We got ideas from looking at photos of finished ideas. We learned how to properly prepare the surface of the door for renovation.

If you feel the potential, but don't have the courage to take a swing at the big door, start with dollhouse elements. Your child will appreciate the creative solutions for decorating doors, and you will have the courage to realize your desires to update them in your home.

Video: how and how to update old interior doors?

How to repair?
Option 2: wallpapering
Method 4: Vinyl Decals
Method 5: false facades
Method 6: Refreshing the Canvas
Hardware decor
Repair is easy

A door made of solid wood during repairs often needs not to be replaced, but to be restored. This measure will save on updating the canvas and keep a quality product in its place. In addition, the restoration of wooden doors helps to adapt them to different styles, which periodically change during the repair of premises.

Refurbish or change?

When the question arises of changing the door, few people think that it can be restored. In what cases is it really the best measure:

When repairing wooden doors is impractical and it is rational to choose to reinstall the unit:

The old door leaf and frame, which fell into disrepair: dried out, cracked, the integrity of the structure was violated;
The door is made of cheap materials: fiberboard, MDF, etc.

The decision to update the front or interior door should not cause concern about the production of work, it is quite possible to do it yourself. Next, we present detailed instructions how to update doors, consider ways to restore canvases and a door frame.

What tool is needed for work

To update or restore an old wooden door, you need to prepare the canvas for work. To do this, you will need the following tools:

Useful for the restoration process itself:

Spatulas for leveling depressions and irregularities on the surface of the canvas;
Putty on wood, close to the natural color of the base;
Stain, varnish, paint, depending on the type of restoration chosen;
Brushes, sponges and rollers for uniform application of coloring compositions on solid wood.

Preparing the canvas for renewal

Before proceeding with the repair of old wooden doors, it is necessary to take a number of measures to prepare the canvas and the box:

In cases where there are significant potholes on the door, you can put a piece of wood in them and rub it with a spatula. The method will save on materials - the cork will be securely fixed in a small amount of solution.

How to repair?

When the preparatory work is over, the plaster has dried out, you can start decorating the canvases. There are several ways to restore a wooden door:

Sanding with painting and varnishing;
Wallpapering;
Stencil drawing;
Vinyl stickers;
Overhead facades;
Canvas update.

All methods are used in modern restoration work. Each process requires an individual approach.

Option 1: sanding and painting

This is the ideal way to restore veneered surfaces. A properly selected composition of the coloring matter may not hide, but emphasize the woody pattern on the door. After all the preparatory work, the canvas is evenly painted in the desired color. For deep color saturation, lay the enamel in 2 - 3 rows. Veneering a coating is difficult without special equipment, and updating the pattern and color is easier than ever to emphasize. Painting can also preserve the old decor of the door.

Before coating with varnishes, you should walk on the surface with a stain to prevent the development of fungi and mold.

Option 2: wallpapering

Repair door block wallpaper is another interesting idea that completely combines all the objects and designs in the interior. You can update this method at least every year during repairs and outside of this event: it is easy to perform and the price of coverage is very small.

How to update wooden doors wallpaper:

On the prepared canvas, it is necessary to apply a primer in 1 layer and wait for it to dry completely;
The wallpaper is pre-cut to the size of the door. This must be done carefully so that then the cut out contour coincides with the door. Ideally, make a paper overlay with a fold allowance.
Now apply glue to the tree and attach the paper sheet. If the wallpaper is non-woven, spread glue on the roll and glue it to the base. Smooth well and remove excess glue. After drying, attach the fittings and hang the canvas.

Option 3: Stenciling

Do-it-yourself restoration of wooden doors can be done using stencils. They are sold ready-made or made independently on a large sheet of paper or wallpaper.

To apply the finished drawing, follow the instructions:

The prepared base is covered with paint or varnish, waiting for drying;
A stencil is glued onto a dry surface;
Cover free space inside or outside;
Tear off the template and wait for the paint to dry.

Method 4: Vinyl Decals

A modern version of interior decoration. Vinyl stickers are not afraid of moisture and water, the sun, they are easy to wash and clean if necessary. Pasting them on the door is very simple: apply the sticker and smooth it out. The advantage of modern interior stickers is their reusable use and versatility. They are easily removed from the surface without leaving a trace, if desired, the location of the stickers can be changed. Suitable for decorating a plastic balcony door.

Method 5: false facades

Repairing interior wooden doors in the usual ways can sometimes not give the expected effect and the process will require drastic measures. When you need not to restore, but to completely update the facade of the door, overhead facades will come to the rescue. They are made from different materials, it is advisable to purchase an overlay from MDF:

The door restored in this way radically changes its appearance.

Get a canvas of the right size;
Attach a false facade on the prepared base;
Attach it with screws or PVA glue.

Method 6: Refreshing the Canvas

How to update an old interior door if you want to add or change the location of glass in the canvases? For this you will have to work:

Hardware decor

If the door is old, it is probably equipped with fittings made in ancient times, which throwing away is a real crime. When the handles and hinges are worn, it is better to restore rather than throw them away.

To breathe life into the fittings, treat the products with sandpaper from possible corrosion, cover with a layer of primer-enamel. She will not hide the ornament applied to the handles, but will only emphasize it favorably. After drying, the handles and hinges can be attached back to the canvas and hung in the opening.

Repair is easy

We told you how to make a new door out of an old one without replacing its main parts. These processes may seem difficult, but in fact, even an inexperienced master can handle them. The main thing is to start. You can change the appearance of any door:

Input;
Interroom;
Leading to the balcony.

You can come up with your own way of restoration: covering with acrylic paints, painting, etc. The main thing is to properly organize preparatory stage to create a working base, and then it will go like clockwork. The main thing is not to be afraid and start.

Even in those apartments where repairs have already been made, there are old, worn out by time, with minor defects or significant damage to interior doors. Scuffs and scratches give a completely unaesthetic appearance to the interior of the room. There seems to be only one way out - to update the door. However, buying a new product is often a costly undertaking. Therefore, it is a competent restoration that will help to adequately get out of the current situation.

Process details

Old or damaged interior doors are subject to restoration. The cause of mechanical damage may be, for example, a fire. High humidity can also adversely affect the wooden canvas. Often mechanical damage occurs after opening the doors using improvised tools. When restoring the product, the replacement of the door leaf, updating the door jambs, painting or tinting the surface may follow.

Resuming functionality often requires updating fittings or locks. With minor damage to interior doors, restoration work can be done by hand.

Repair original doors it is better to entrust a specialist in this field. Work should also be left to a professional if the restoration requires replacement of the door jamb or repair of the entire door frame as a whole.

For review, some of the advantages and features of the restoration of interior doors are presented:

doors from solid wood it is profitable to repair, bringing it into proper and working condition, rather than spending the budget on a new product.
Update the old door when changing the interior style in the house. The procedure is performed even when the canvas is still in excellent condition and does not need to be replaced yet.
Restoration of old wooden structures is performed when the canvas and door frame are handmade, have a unique ornament and texture.
Making the door surface with your own hands will allow you to create a unique product that will harmoniously decorate the entire interior.

The interior door must be repaired in the event that, due to the replacement of the door, the integrity of the opening or wall cladding may be violated.
Due to the non-standard size of the old door, it is better to carry out restoration work than to carry out a time-consuming replacement of the product.
Restoration is convenient, since the replacement of the product is often accompanied by the replacement of the entire door frame. This procedure will definitely create the need to close up the resulting cracks, plastering and wallpapering around the doorway.

For independent work, you will need a lot of free time. The phased execution of all procedures will be the key to a successful restoration of the door leaf.

The successful application of methods for restoring the product, first of all, depends on the characteristics and properties of the material for the manufacture of the door leaf.

materials

Previously, interior doors were made exclusively from solid wood. Currently, polymers and glass are included in the composition of door panels. The surface can be coated with high-quality varnish or laminated. Oak doors or beech products are premium door leafs that have a fine natural texture and are distinguished by various shades.

Increased strength and durability make such interior products desirable and practical. Only the price due to these advantages is very high. Carrying out work on the restoration of products much more economical than replacing the entire blade.

The most demanded material in the manufacture of canvases is fiberboard. The methods of restoring such doors differ from the restoration work of solid wood products. To remove a layer of old paint from the surface of a fiberboard product, an iron and a building hair dryer are used. Given the fine structure of the surface of the product, grinding work is carried out only with a fine sandpaper.

With the help of finishing elements, by slightly changing the surface relief, you can get an analogue of a paneled canvas. Expensive models consist of dense tile material. High-quality surface finish of the product determines the value of the product.

Often applied pasting of innovative veneer. The basis of the door will be inexpensive material pine, lumber or particle boards. Under the influence of temporary changes, veneered products may lose the integrity of the top layer. For the restoration of such doors, special wood glue is required. When using glue should also take into account the favorable temperature regime and avoid moisture. Violation of this mode can adversely affect the veneer surface, which leads to swelling and delamination of the material.

For amateur use metal structures in the house. iron doors also tend to wear out, unless, of course, these are armored products. Even on high-quality canvases, the exterior finish deteriorates over time, locks break, accessories crumble. Long-term operation significantly affects the appearance and mechanism of the design of such doors. In iron interior structures, aluminum or stainless steel is mainly used. Metal parts are successfully combined with other materials.

If you purchase new door, then high-quality metal products are expensive. Therefore, it will be much more profitable to repair the old door. According to the experience of professionals, it can be noted that any options are amenable to restoration metal doors. Professionals can replace the hinges, handles and lock in accordance with the color scheme of the door leaf to be restored.

Options for different models

It is safe to classify the "Stalinist" door as an antique. Room products of this era are usually double-leaf, often with glass inserts. In the "stalinka" products are heavy and bulky, which makes it a little difficult to work on their restoration. A professional master can easily pick up modern material for their cladding, the necessary fittings and type of decoration.

Door leafs and the surface of historical "Stalinist" doors are usually wooden. If the cause of damage is not mechanical impact, then scuffs are the effect of time. Refurbished wooden doors should have an aesthetic appearance. Masters will help you choose the main material and finishing, give a laconic look to antique doors.

In an apartment with a Provencal or scandinavian style interior door restoration also has a decorative character. Finishing with the inclusion of patina and painting will turn an ordinary old white door into a stylish decorative element. The presence of frames and crossbars characterize the prefabricated interior door, which is also called paneled. For example, panels can be in the form of MDF sheets or glass inserts. So it is possible to create curly elements and make the appearance of the canvas quite interesting. Restoration of paneled doors implies the preservation of existing reliefs or complete replacement product surface.

This option is suitable for offices, bathrooms and toilets, balconies and other rooms with high humidity. Economical and moisture resistant models are indispensable for such premises.

Glass is often used as an insert, and there are also options for completely transparent doors for a newfangled living room interior, for example. Only special texture types of glass cloths are used. For safety reasons, the material must have a protective film, not form sharp fragments when broken, which is also taken into account when restoring such canvases.

How and what can be updated: ideas

Various materials are used to repair and decorate an old or damaged door. The color scheme of the provided material is also diverse. Difficult work on restoring the door and decorating the surface is best left to a specialist in this field. It is possible to fix minor scratches and simple work on decorating an old surface yourself.

in a simple way door upgrade is surface painting. Anyone can paint a surface. Both for painting and for other types of restoration, you first need to prepare the surface of the product. Cleaning and freeing the surface from the old coating will be the first step in the restoration of the product. A fine-grained sandpaper will perfectly clean it of old paint. After small cracks and scratches are covered, then the type of coating and decorative elements are selected.

Acrylic paint is offered for painting in one color. In the case of the restoration of a wooden door, paint and varnish are selected for work on wood.

Painting in several colors is a more complex process. To do this, with the help of masking tapes, different shapes are created on the decorated surface. After applying paint over the created picture, an interesting geometric ornament is obtained. Different colors can be created by adding dyes to a white base. Existing Method surface tinting will help create the effect of the presence of the most expensive types of wood in the composition of the canvas.

Special tinting impregnations - stains, will give the wood any desired color. As a rule, these are the tones of elite tree species. Due to this, the pine coating can be given a visual resemblance to the walnut canvas. Of course, it will only be external. Such properties as moisture resistance, resistance to decay in this process are not acquired.

When painting, the moment is also taken into account that the tree tends to absorb paint a little during processing. Therefore, it will be necessary to apply another layer.

When working with paint, you can create not only plain doors, but also entire compositions. Designers from the original sketch will be able to recreate any pattern if applied through a stencil. It is also better to entrust the idea of restoration in the form of artistic painting to professionals, since one cannot do without artistic skills. Additionally, you can do protruding parts, that is, moldings. They are also dyed. For an original effect, they can be decorated in a contrasting tone.

In the case when the door is even, without relief and moldings, you can imitate their presence with an ornament or stick polyurethane carved slats. Reiki must first be painted in the desired color.

The next stage of finishing is the design of doors with wallpaper, fabric. In this case, there are no special restrictions, since almost any images and materials of different textures can be glued to the door. First of all, you can pay attention to the photo wallpapers, which are presented in abundance in specialized stores. Any paper materials, as well as standard wallpapers can be useful too.

Care must be taken that the material is not too transparent. Otherwise, glue or hidden reliefs will show through. At the end of the installation, using wallpaper, fabrics or paper, it is recommended to apply a layer of varnish. Such a coating will become a protection for the door surface.

Many models of interior doors have inset glass, which is why stained glass design is very popular. Special stained glass paint is used for drawing patterns and ornaments on a glass surface. For independent work, materials for painting and stained glass work are purchased at any special store. Drawings can be transferred to glass by sandblasting the surface. In a specialized workshop, they can simply do such work.

Sticking vinyl stickers as a way to decorate and restore a product is one of the simplest procedures. Vinyl door stickers are sold almost everywhere. The protective coating can be easily removed. Without preliminary preparation, a film is glued to the door leaf. After finishing the work, the protective film on the outside is also removed. It is worth considering that vinyl stickers can even be painted.

The decoupage technique is also easy to perform and makes it possible to hide minor defects. In the process of this finishing, pieces of material, paper, napkins are collected into a single semantic picture, glued to the surface and varnished.

The option of finishing by building a picture from a mosaic is original and not expensive; in the process, fragments of ceramics, glass, wood, and veneer are used. In addition to the standard methods of restoring interior doors, you can apply an extraordinary design method. Update doors using various bulk materials. When pasting the surface with cereals, such as rice or buckwheat, you get an exclusive and original work.

To fix the grains, you can purchase PVA glue. After complete drying, the surface is recommended to be varnished several times to protect it from moisture. Considering that the cereal is dry in consistency, does not rot or deteriorate, and the lacquer coating keeps the composition from moisture, there is no doubt about the durability of such a design.

Recovery workshops

Minor damage can be repaired on your own and at home. To do this, it is necessary to properly prepare tools and materials for restoration. The stages of work are as follows:

On initial stage the door must be carefully prepared. For this, the characteristics of the material of manufacture are taken into account. Basically, wooden products are subject to wear. If interior doors are covered with veneer, wax, soft in consistency, as well as a special varnish and a tool in the form of a spatula, are purchased to work with the surface of the door leaf. For wooden products, hard wax and rough sandpaper are required.

Before starting work, you must carefully remove the door from the hinges, fittings and locking device. If there are glass inserts, then they must also be removed, since all fasteners will be dismantled. Restoration work with the door is best done indoors with sufficient lighting. Before placing the product in the workplace, it is necessary to protect flooring, as there is a risk of damage to it, since the paint from the damaged product will be removed under the hot air flow from the hair dryer.

From the door surface remove dirt by washing it with soapy water. After the door is viewed for the presence of significant defects. Minor scratches can be filled with putty. Further wooden canvas wrapped in flannel. The process begins with grinding the surface with the removal of excess wax with the help of solvents. Further, the surface is recommended to be varnished.

In any case, when working on the restoration of a door with a painted surface the old coating must be carefully cleaned off. Doing it yourself is much easier than it might seem, since necessary tools for work are only a spatula and a building hair dryer. The latter does not have to be purchased, currently it can be purchased for rent. If the doors will be decorated in the future, you should remember the platbands and the door frame. They also need to be trimmed to match the color of the door itself.

After paint removal the surface is examined for scratches and other damage, they can be sealed with both putty and specialized putties for wood. The final stage of preliminary preparation is sanding and grinding the surface with sandpaper. In order to protect the door from the influence of moisture, the sealed surface is treated with drying oil. The same property is also possessed by ordinary stain, which, in addition to protection, will give the surface a natural color.