Decorative fireplace from a Chinese light bulb Flame Effect Bulb. DIY artificial fire for a fireplace DIY artificial flame

The fireplace device is one of interesting solutions interiors, giving the interior decoration of the dwelling internal warmth, comfort and home appeal. But it is far from always possible to fit a real fireplace into the design. As a rule, this is due to the inability to arrange a chimney, the lack of storage space for firewood and other reasons associated with the use of open fire in the room.

There is nothing difficult to create an imitation of a fireplace without heating in an apartment with your own hands. This will require drywall sheets, materials for exterior finish, fantasy for the project and good mood for work. The fake fireplace is ready and all that is left is to fill it with artificial flames, sit in an armchair and enjoy the play of light and shadow.

The main task of the illusion of live fire in the hearth is to form a spectacular, as realistic as possible sensation of a burning flame. Visualization is the main element of the task, but not the only one. To complete the perception of the picture, not only the visual component is necessary, but also the corresponding crackling and smell of burning panels, as well as the physical sensation of heat flow. To do this, there are modern methods of creating a "cold fire" in a false fireplace.

A bit of history

The first experiments in creating a safe fire and turning household heaters into residential decor elements have been undertaken for a long time. The origins of this direction include an electric fireplace with a heating element and decorative panel. It was carried out in the form of glowing coals with internal illumination by a conventional incandescent lamp. Similar imitators could be found in the middle of the last century.

Somewhat later, the backlight was given dynamism. Electrical appliances were equipped with strips of foil that rose in the streams of warm air and reflected bizarre reflections on the body of the device, creating the effect of a flickering flame.

The first successful illusion of live fire was the cutting of light fabric, swaying in artificial air jets pumped by a built-in fan. This principle of imitation of open flames formed the basis further development design direction and still has the right to life.

Cold fire, obtained in this way "in its pure form", has a sufficient level of entertainment, light reflections whimsically and uniquely change their position in space. But the realism of such an imitation is low, since the picture looks like a hand-drawn one. To add volume and “visual vitality”, a built-in system of mirrors and light filters is used, as well as electronic control of the backlight elements.

In addition to electronic-mechanical methods for creating the effect of live fire, digital and LCD technologies, cold steam generators, 3D holograms with a stereo effect and other achievements are widely used nowadays. modern development science and technology.

There are several ways to light a safe fire in an apartment fireplace. Let's consider them in more detail.

Method one. Protozoa

If there is no desire or opportunity to engage in the manufacture of a complex electronic-mechanical structure, then you can use the simplest solution to the problem: paste a photographic image of burning firewood into the hearth of the fireplace. To give some semblance of realism, it is necessary to install spotlights with filters of various colors.

The most low-cost, but no less effective, will be the use of an old Christmas tree garland. To do this, mini-plafonds are trimmed with reflective foil from the inside. The controller built into the garland will allow you to simulate the dynamics of light transmission, as from living flames. To give the picture a visual stereo volume, you can choose a holographic 3D image of an open fire of a suitable size.

Method two. Theatrical

As the name implies, this method is borrowed from theatrical props. When, according to the plot of the play, it is necessary to make a safe fire on the stage, the decorators use just such a fire.

To make a theatrical fire in the fireplace, you need to stock up on the following items:

silent fan of medium power;
halogen lamps;
color filters of appropriate shades;
white silk.

The fan housing is dismantled. Its working part is rigidly attached to the bottom of your fireplace in such a way that the injected air flows perpendicular to the base. The wiring is laid in the cable channels and led outside the fireplace.

Below the working plane of the fan, three halogen lamps are mounted: one along the central axis of the fan, two at an angle of 30 degrees to each side. The direction of light on the future focus should be from the bottom up.

As brackets for fixtures, you can use the remains of a bent metal profile for plasterboard. Light filters are attached at a distance of 1-2 cm in front of each lamp. It is additionally recommended to put a light filter on the central lamp of blue color, this will give the flame more exotic highlights.

The next stage is the imitation of flames. Irregular future flames are cut from white silk and attached to the fan grille in an "artistic mess".

The open flame simulator is ready to go. It remains to adjust the fan power, the angle of inclination of the light filters and fill the artificial parts of the hearth with purchased birch charcoal.

Method three. water vapor

All of these devices can be purchased at retail or dismantled from old concert equipment that creates a vapor effect.

Fog generators are installed at the bottom of a sealed container for distilled water. Each generator in its design involves a membrane, which, due to high-frequency vibration, creates a local reduced pressure. In conditions, low pressure, water evaporates at a temperature close to room temperature.

The fan is rigidly mounted in the zone of active evaporation and drives the formed steam up. LED backlighting, controlled by a decoder and controller, creates a very realistic visual sensation of the play of light and shadow of live flames.

In the lower part of the fireplace hearth, the steam is illuminated more strongly and there is a feeling of the presence of an open flame. At the top, the backlight is less intense and the illusion of smoke is created.

To prevent the formation of excess condensate, a diaphragm is installed in the upper part of the hearth.

Method four. The use of a salt ceiling

Salt electric lamp- This is a special electric light. The plafond is made of natural crystal - salt. Under such a ceiling, a conventional incandescent lamp is installed. Passing through the edges of the crystal at different angles, the light flux is refracted and outwardly very realistically resembles the play of living flames.

Using shades of various colors, a realistic imitation of live fire is created. And using lamps with different configurations and sizes, a small fire is easily imitated.

This method has its advantages and disadvantages.

The advantages include the simplicity in the manufacture of such an illusion, its realism. In addition, when heated from an incandescent lamp, the salt ceiling saturates the surrounding air with negative ions. This leads to the neutralization of positive ions, which has a positive effect on the health of its owners.

The disadvantages of this method include the very significant price of such devices and their infrequent appearance in free sale.

Method five. TV instead of live fire

Using a flat LCD TV in a fireplace is one of the most technically simple options for solving the problem. But, it should be noted, far from low-cost.

If the choice falls on such a method of “igniting” an artificial flame in a fireplace, then first it makes sense to choose an LCD TV, and only then, based on its size, mount the fireplace casing. The TV screen is installed on a recess of 10-12 cm in the hearth of the fireplace. Its plastic frame is hidden by decorative elements.

Through the USB port built into the TV, a recording found on the Internet is played on the screen. Depending on the mood and environment, you can choose one of several recordings: the play of flames, embers or a bright fire. The selected record with repeated repetition will serve as an imitation of live fire in the hearth.

If you place a system of mirrors and light filters along the internal planes, then the picture will visually acquire volume and look very natural.

Decorative firewood for fireplaces

To give a finished look to the fireplace under a cold fire, it is necessary to “put” firewood and coals. On the windows of specialized stores there is a huge selection of decorative firewood made of plastic or ceramics. Such dummies exactly repeat the texture of dry or partially burnt wood. Imitation, purchased or made with your own hands, will turn the hearth into the center of home warmth and comfort.

In order to obtain greater realism, a backlight with red light filters is installed under the wood-burning display. In more expensive versions of decorative firewood, internal lighting with a non-repeating flicker cycle is provided.

To give the integrity of the picture, small gaps between decorative firewood are recommended to be covered with natural charcoal.

Fire is one of the elements that has a truly magical effect on a person. It is impossible to get tired of the contemplation of a burning flame, which relieves fatigue, allows you to relax or, conversely, mobilize thoughts, think about the important. In organizing a romantic dinner, fire plays the role of an indispensable addition.

A room electric fireplace may well replace a real one, provided that the main functions are performed qualitatively: creating heat and simulating a flame. But not everyone can buy a fireplace in a stylish frame, with a three-dimensional image, with a set of programs because of its high cost. Therefore, among novice masters, more and more often a conversation starts about whether it is possible to make an electric fireplace with your own hands.

Just a mesmerizing sight

The manufacture of a heating element is a troublesome business, but clear enough. This requires basic skills and physical knowledge. But the effect of a living flame, at first glance, seems out of reach. However, this is only a deceptive fear that prevents you from doing, doing and getting an excellent result.

Firewood layouts

Regardless of the type of construction imitating a flame, a firewood layout will always be needed. In this matter, the flight of the master's imagination is only welcome. The props can be bought in the online store. From China, they can send you components for fireplaces (we will use this fact in the future). In some cases, real firewood is used. With skillful lighting, a good result is obtained.

But if all the searches were unsuccessful, then you will have to make a dummy yourself. But then it will be doubly pleasant to look at manual work. Used as material corrugated cardboard, it can be found in boxes from under household appliances. There it is often used as filler between sheets.

Corrugated cardboard log

Having made tubes from such cardboard and painted them in Brown color, we will get a log, to which a knot made of the same material is attached to the adhesive tape, only with a smaller diameter and length. It remains to stack the firewood in the fireplace, from a distance they look like real ones.

Initially, the fireplace in the house performed an exclusively heating function, and only after that the role of decorating the interior. Today, a central heating system is used as the main source of heating in an apartment or house. That is why, many began to give preference not to the classic solid fuel stove, but more modern variation called fake fireplace. Such models can be bought or made with your own hands from improvised means, as they have an exclusively decorative function.

The fireplace, the imitation of which takes place, can be assembled and designed by the hands of an experienced professional who can recreate the necessary image, according to all the wishes and preferences of the customer. imitation of fire in the hearth of such a portal can be done in various ways, in this case a real flame is almost never used.

Main varieties

Before installing an artificial fireplace in a house or apartment, it is first of all recommended to familiarize yourself with the main varieties and variations that you can either assemble with your own hands or meet in specialized stores:

Simulation of fire in the fireplace can be composed and reproduced without fire sources, environmentally friendly and durable materials. You can assemble a portal from drywall or polystyrene with your own hands at home. Such materials are affordable and easy to use. They do not require expensive and professional tool. The finished product will have a small weight, which is extremely important, especially when installed in an apartment or on the second floor of a private house. Such a false fireplace, due to its small mass, should not be decorated and decorated with heavy objects and purchased fireboxes. Drywall is heat resistant, which in turn allows you to decorate its hearth and shelves with candles. A fireplace with candles looks very elegant and charming;
A fireplace, an apartment with which will look original, can be assembled from plywood. The plywood fireplace portal is budget-friendly. However, it is not very stable and reliable. A plywood fireplace requires high-quality surface protection, as the material quickly absorbs moisture, swells and deforms. The advantages include environmental friendliness and naturalness of the material;
A fireplace, stone or brick for which they serve as the basis, will be more reliable and as refractory as possible. Such materials withstand high temperatures well, their sudden changes, are strong and durable. Particularly large and bulky fireplace portals may require the construction of a foundation. The price of a brick fireplace is quite high, and the construction is time-consuming. However, if desired, you can install an electric fireplace in such a portal. Because the cost natural stone high enough, the cladding of the portal can be done with artificial minerals.

Creating a hearth

A decorative fireplace can be decorated with a garland. Such a garland fits both in the hearth, and can be located along its perimeter, or in a chaotic manner. It is recommended to select garlands with traditional classic colors of burning lamps. To give an imitation of a fire burning in the hearth, you can add ceramic logs to the hearth.

You can add a false fireplace with the help of tree branches. You can arrange them in any way. As an option: wrap the branches with foil and lace, then fix various stones, shells and other decor on the glue. At the end, you will get lacy branches, which can be placed both completely apart and in vases.

Lace can be located both along the length of the entire branch, and only in a certain area, gap. After gluing, it is necessary to allow the product to dry completely and only after that, use the decor to decorate the false fireplace. If desired, such branches can also be painted or supplemented with sparkles. Alternatively, put them in the hearth and light them up with an LED garland.

You can also use candles for decoration. They can be located separately or located in various openwork candlesticks, candelabra. Install them inside the hearth or a mantelpiece can also be added. You should not place candles in white, beige, cream-colored stone, as during the operation of the decor, ugly black marks and prints from candles will remain on the surface of the portal and in the hearth.

The imitation of a fire in a fireplace can be done in one very interesting way. At the exit you will get a fireplace with candles. To do this, find 2-3 beautiful logs of the correct shape and cut 2-3 holes in each of them. In the resulting holes, lower one candle at a time. It is important that the candles are in candlesticks or in special protective frames. This will prevent the logs from catching fire during the burning of candles.

As a more expensive option, you can decorate the fireplace hearth with a salt lamp. Such a device will look stylish and impressive. The disadvantages include a fairly high cost. The main advantages are the health benefits of salts, the creation of a cozy atmosphere in a house or apartment.

An electric fireplace can also perform an exclusively decorative function. It can be equipped with a steam generator and even a humidifier!

Modern technologies and fresh solutions

An electric fireplace is a live fire - this is the most realistic means for simulating a flame. In this case, the simulation is performed using modern technologies, namely the LCD screen with a three-dimensional and high-quality picture and animation.

To make any flame more voluminous and spectacular, you can install several large mirrors opposite and on the sides of the hearth, at a slight inclination. A fireplace with a mirror will create the illusion that the fire is real. You can also install mirrors in the hearth itself.

If you like to create various things with your own hands and want to get the best result, we recommend building an imitation of logs. To do this, we need decorative firewood, an LED garland or lamp, fabric and a number of other materials at hand.

The basis of our firewood is cardboard. Each log needs to be cut out of cardboard and given volume, glued together. The surface can be painted with acrylic, gouache or watercolor to choose from, and then let the firewood dry. Firewood is glued together in the form of a well and placed in the hearth. If desired, such cardboard logs can be replaced with real ones. In this case, construction adhesive is used for gluing.

To create volume and characteristic shades, you need to buy an LED lamp in advance, which will flicker in various shades. It is recommended to give preference to the characteristic color spectrum - yellow, red, orange. A translucent white fabric is used as a ceiling lamp, and the frame is constructed from four strong wires, the length of which will be 150-300 millimeters.

The light bulb is fixed inside the hearth, directly above the imitation. The wire frame is installed in the center of the well and is complemented by a translucent fabric. When turned on, a fairly realistic effect of a flame burning in the hearth will be created.

Realistic simulations

One of the most realistic options for creating an imitation is the so-called fire box. To create this effect, you need to buy LED lamps, preferably red, yellow and blue. As a reflective surface, you can choose small mirror, foil. Also, for this effect, you will need a fabric or its scraps (silk). The so-called fire will be placed in a box.

At the first stage, we decorate the base (box) itself, after which we act according to the following step-by-step guide:

We put the fan in the box;
LED bulbs are located and fixed near each other;
The space near the fan is supplemented with flaps.

Such a box with fire is placed inside fireplace portal and allows you to reproduce a fairly realistic effect.

You can also simulate using an aquarium. In more detail, you will need to prepare an aquarium of such a size that it can be installed in the hearth. After that, a garland with LEDs is placed and fixed inside the aquarium, the container is filled with water. When you turn on the garland, the effect of blazing water will be created, which looks very original.

The interior of the aquarium can be decorated with shells, stones, algae and other elements of your choice.

The category of the most realistic and difficult to implement variations includes the creation of the illusion of a flame burning in the hearth with the help of steam. To generate steam, you will need to buy 2-3 fog generating devices (ultrasonic).

You will also need to prepare a fan, a reservoir into which water will be poured, a frame to accommodate the simulation and an RGB lamp.

Fog generating devices are installed in the inside of the box along with a fan, then we place the lamps, and we install a prepared reservoir for filling water on the generators. This effect is very realistic, but at the same time its recreation is quite expensive.

The fireplace in the interior of your apartment for the home will become a real hearth and fill the living room, bedroom with comfort. The outdoor fireplace can be both wall-mounted and island, corner, depending on your wishes and preferences. The false hearth is quite easy to install, it has small dimensions and optimal weight, and some models can be moved from place to place. To simulate a flame, you will need mostly inexpensive improvised materials, and the design itself does not require the construction of an additional foundation and a chimney.

Such a hearth will allow you to arrange cozy family evenings in the company of friends and relatives over a cup of warm tea.

In this video clip, you can see what an imitation of fire in a fireplace looks like with your own hands:

Option one

We perform imitation of fire in the fireplace on our own

Imitating fire for a fireplace will take very little time. To do this, first of all, we need to make a small lamp, which will perform the main function - the burning effect.

Materials for making a model:

Pieces of white silk;
Reflective halogen lamps - 3 pieces;
Medium bowl;
Big fan.

The container for the future flame is a pre-prepared bowl

It is important to remember that in size it should be the same scale as the fan.

Having picked up a container that is suitable for its size and characteristics, it is necessary to fix a fan on its bottom. It must be fixed in such a way that when turned on, the air flow is directed outward. In the same container, it is necessary to fix halogen lamps, of which there should be three.

This is necessary for uniform illumination of our dummy. The axis of fixing the light bulbs must be strictly one. Light bulbs are located above the fixed fan and along all edges.

Imitation of fire in a fireplace without heating, with strict observance of all these rules, will be simply amazing!

Biofireplace stylish interior solution

In rooms where it is not possible to equip a classic fireplace, their "brothers in fire" will be especially relevant. They will create a unique coziness and atmosphere that promotes relaxation and intimate atmosphere.

The mobility of the bio-fireplace is noteworthy: at any time it can be rearranged to another place. Often, ceramic decorative firewood, cones or stones are placed in the hearth, which successfully emphasize and complement the picture of naturalness.

On the market, you can now buy the most diverse and original models of biofireplaces, including high-tech ones, so everyone can choose a biofireplace for themselves. Find their owners and monumental floor models, and babies that can easily fit on a small coffee table. The hearth is guaranteed to bring a special mood to the room.

Wall biofireplace

Floor corner biofireplace

Biofireplace device

Its basis is a firebox, in which a stainless steel biofuel tank and special burners are mounted. When fuel is burned, a bright and clean flame is formed that does not emit sparks, soot, soot and smoke. The intensity of burning is easily adjustable. For this, a slider cover is used, which is equipped with a heating unit.

It should be noted the convenience of refueling the heating unit. Thanks to the “offset” filling system, it is convenient to pour liquid fuel into it. This minimizes the risk of fires and burns. The material of manufacture of the heating block is two-millimeter stainless steel. Due to this (under conditions high temperatures) it does not deform

It is important that the design of the unit helps to reduce the return of the flame, and also eliminates the formation of the so-called "explosive cloud"

The biofireplace is decorated and lined with refractory glass, painted steel, granite, marble, veneer and other materials. As a result, a biofireplace can have the most incredible shape, which even professional decorators and lovers of the most extravagant interiors liked so much.

Floor biofireplace

Glass floor biofireplace

Glass desktop biofireplace

Fuel and heat transfer of a biofireplace

The hearth is refueled with special fuel, based on ethanol - ordinary alcohol. But, since the free sale of purified ethanol is prohibited, denatured alcohol is used as biofuel. It does not pose a risk to the environment. The combustion of ethanol is accompanied by the release of heat, carbon dioxide and water vapor. These substances are relatively harmless, but you still need to slightly open the window and periodically ventilate the room.

Biofuel for biofireplace

It all depends on the size of the biofireplace, because a large outdoor biofireplace during active operation is able to emit a significant amount of carbon dioxide, in contrast to a small option, the amount of CO2 emitted in which is comparable to normal human breathing. The process of burning denatured alcohol looks beautiful and forms spectacular tongues of fire.

Biofuels are mainly produced in canisters with a capacity of 2.5 and 5 liters. On average, 0.36 liters of fuel are consumed per hour of burning. It follows from this that a biofireplace with a 2.5-liter heating block will burn continuously for approximately 10 hours. Since the efficiency of the heating block is more than 95%, almost all of the released heat will remain in the room. The thermal performance of the biofireplace heating block, which runs on denatured alcohol, is approximately 4 kilowatts per hour (the equivalent of two ordinary electric heaters).

Several arguments in favor of the environmental friendliness of biofireplaces

clean, environmentally friendly raw materials - bioethanol - are used as fuel;
it is fed for combustion into a patented burner that will not allow the liquid fuel to evaporate;
the flame of a biofireplace does not emit soot and smoke;
biofuels are not hazardous to human health and the environment. It does not cause allergic reactions and is non-toxic;
combustion of biofuels occurs with the release of a minimum of carbon dioxide (approximately as much as is formed from the combustion of two paraffin candles);
biofireplaces can be used for aromatherapy (suitable kits are sold).

Several arguments in favor of the safety of biofireplaces

After analyzing the types of fireplaces for safety, you can make the following rating:

The first place is occupied by all types of electric fireplaces, since they are not sources of open fire.
The second place among fireplaces in general and the first among open fires, where a real flame forms behind a biofireplace. The fire from the burners in it is reliably protected by a refractory screen. At the same time, it must be remembered that it is dangerous to keep flammable objects closer than half a meter from any source of fire.
The third place was taken by gas fireplaces. In terms of safety, they outperform ordinary ones, but we must not forget that gas is also an explosive substance.
Last in safety is the traditional fireplace. Sparks, soot, a faulty chimney damper are all risk factors. In addition, he is in the first place in terms of the complexity of installation and maintenance - his owner will have to regularly remove the ashes and clean the chimney annually.

It is impossible to neglect the safety rules when using all types of fireplaces and any equipment in general!

Ceramic firewood and logs in a biofireplace can not immediately be distinguished from real ones

Step-by-step instructions for making an electric fireplace portal

The question arises, how to make an electric fireplace with steam with your own hands? Let's figure it out. Models of electric fireplaces are different and they are made of different materials. For example, such as: drywall, stone, noble tree species, chipboard, plywood and many others.

Do-it-yourself electric fireplace, step-by-step instruction which is presented, can be done without any problems. The fact that it is divided into parts is only a plus, since you can choose the most best option based on preferences and possibilities. Read also about on our website.

In order to create a portal to an electric fireplace with your own hands from drywall, special skills and any specialized tools are not required. Facing the portal of the electric fireplace with your own hands is performed in this case from finishing tiles, although other options are possible.

Before making a portal, you should:

choose a place where the electric fireplace will be installed;
buy or create an electrical element of the hearth;
draw a drawing;
prepare necessary materials and tools.

In order to make a portal for an electric fireplace from drywall, the following materials will be required:

metal profile, to create the design and fastening of drywall;
drywall sheets;
putty diluted with water;
primer;
mesh for seams;
insulation;
pre-created drawing;
self-tapping screws;
metal corner for fixing corners;
facing tiles;
furniture board;
special glue.

Earlier we already wrote about manufacturing and recommended bookmarking the article.

Required tool:

spatula;
screwdriver;
stationery knife;
sandpaper;
metal scissors.

Types and models of portals for the fireplace, features of their installation, recommendations and helpful tips for those who want to create in their apartment a cozy recreation area with a home.

After preparation necessary tools and materials, you can get started:

Stage 1. Preparation of metal profiles and drywall. Cut to the dimensions that were thought out in advance. Based on them, a drawing was built;

Stage 2. Installation of a metal profile according to the drawing;

Stage 3. Fixing drywall with self-tapping screws to the metal profile;

Stage 4. We completely sew up the frame with drywall according to the drawing;

Stage 5. We carefully and accurately seal all seams and corners with a putty mixture;

Stage 6. After the putty has dried, you should walk with sandpaper to remove all irregularities;

Stage 7. At the corners on top of the drywall, we install a corner metal profile;

Stage 11. The portal for the electric fireplace is ready.

Placement of decorative firewood

The location of firewood in the niche of the fireplace must be given special attention. This can be done with your own hands and give the hearth a more aesthetic appearance, it will become more believable.
To place a fake log in a fireplace niche, you need to decide on the installation option. The imitation of firewood looks quite impressive in combination with other decorative elements, such as stones or candles.

Set the logs in the form of a "house".
Arrange the firewood in a cone.
In a chaotic manner, as your fantasy suggests.

Imitation of firewood looks quite impressive in combination with other decorative elements, such as stones or candles.

If for some reason it is impossible to place artificial firewood in the depths of the firebox, you can make a separate emphasis on firewood by placing it outside the hearth.

In addition, you can build a firewood shed with your own hands, into which decorative firewood is placed.

With a harmonious selection of stove equipment and decor for it, you can turn the hearth into an object of great attention. The combination of firewood and fire, regardless of whether they are natural or artificial, will give any interior a unique charm and comfort.

Caution does not interfere with the features of the use of biofireplaces

The room in which the biofireplace is located must be ventilated.
To kindle a fire in bio-fireplaces, you need to use a special lighter. It is not recommended to use paper and other improvised materials.
Install the fireplace away from curtains, curtains and chairs upholstered in fabric.
Do not touch the fireplace during operation. Do not allow children and animals to come into contact with it.
Do not add fuel while the heating unit is in operation!
To refuel, extinguish the flame and wait for the unit to cool down (minimum 15 minutes).
There is no place for a canister of biofuel next to a working fireplace!
Make sure there is a fire extinguisher in the room.

If you follow all the rules for operating a biofireplace, then it is able to work properly for many years. All these years, he will delight his owners with a bewitching, lively, open flame, and bring peace, harmony and comfort to their lives.

Outdoor biofireplace

Biofireplace table

Automatic biofireplace line

Tags: biofireplace, biofireplace biofuel

Firewood imitation options and materials

In stores you can find many options for such products. They can be plastic or ceramic. Any imitation, purchased or made by hand, is intended to give realism to an artificial hearth in order to help you feel the beauty of home comfort and warmth.

Imitation of firewood or coals, made of plastic, has a very simple principle of operation. Usually such objects are illuminated with red light bulbs.

It is also possible that the light bulb is inside each element. Of course, this is not entirely realistic, but still.

For more expensive fireplace models, a flickering picture or imitation of artificial flame tongues is characteristic, which occurs due to a special mechanism in which elements rotate around the lamp, with alternating transparent and shaded sectors. This type of lighting can be located either behind the firewood dummy, or inside it.

The exact same lighting system can be used to achieve a burning effect, using real charcoal, which is placed in a fireplace niche.

In this case, the dummy and coals are illuminated from the bottom. Imitation of plastic firewood and coals, of course, is not perfect, and it has its own errors.

In order to hide all the shortcomings as much as possible, backlit artificial firewood is placed as deep as possible into the fireplace niche, and the hearth is decorated with a fireplace grate, which serves as a disguise for shortcomings.

In expensive models of electric fireplaces, you can find several methods of simulating fire. For realism, the paintings use not only dummies of firewood, but also mirrors, with strips of foil or ribbons in which the lights of the backlight glow, creating the illusion of flames. In addition to everything, the models are equipped with various functions, the supply of steam, which imitates the smoke from a fire, a sound device that produces sounds similar to the crackling of firewood.

If your financial capabilities are not enough for such items, then as an option, you can try to make dummies of firewood with your own hands.

The final stage - fixing the structure

It should not only look as natural as possible, but also be additionally fixed. To do this, we use several flaps of pre-prepared fabric. For strengthening, it is best to use white silk, since throughout the structure and color, it harmoniously fits into the overall picture of the dummy and conveys all the lighting effects well.

You need to fix the shreds next to the fan, so when it works, they will carry out rhythmic vibrations.

This completes the imitation of fire in a false fireplace. In order to play this effect, you just need to connect the fan to the network. The advantages of this visualization are guaranteed safety, high realism and minimal production time.

How to make artificial fire in the fireplace with your own hands, simple methods

Many people like to look at the fire in the fireplace. The sight of a flame calms, allows you to relax and immerse yourself in your own thoughts. However, it is not always possible to put a real fireplace in your home, it is especially problematic to do this for city dwellers, whose stress level is very high and who, like no one else, need an effective way to relax.

Fortunately, we can build a fake fireplace in our apartment, which will adequately replace the real one. At the same time, it can have a real fire if biofuel is used, or an imitation of fire in a fireplace, which you can also make yourself. In this article we will talk about how to make an imitation of fire in a fireplace with our own hands, we will analyze the most popular methods.

False fireplace with skillfully filled firebox

Available Options

A decorative false fireplace is created from various materials, you can use cardboard, gypsum, foam, drywall, plywood, chipboard and even brick.

In most cases, these materials are combustible, so it is worth remembering the norms fire safety and do not place real fire in the furnaces.

If you plan to build a biofireplace burner into the furnace, which will create a real flame, then the choice of materials for construction should be taken more seriously. For example, build a brick structure, sheathe the furnace with sheets of metal.

We will consider options when it is required to make an imitation of fire, which would be remotely or very similar to a real flame. And the simplest idea that immediately comes to mind is to create a suitable pattern. Anyone can draw a picture, but how this fire will look on canvas depends on the talent of the artist.

A painted hearth inside a fake fireplace

There are many other options to create artificial fire in the fireplace so that it is more realistic than painted, and the most interesting of them are the following:

using a steam generator is a modern way;
the use of fabric and a fan is a theatrical solution;
the use of LCD displays, TVs - a spectacular option;
original backlighting with a salt lamp is a useful technique;
lighting using garlands is a simple method;
the use of candles, a candle fireplace - a design approach.

If you want to create a high-quality imitation of fire in a fireplace, you can use any of available options However, remember that each method has its own advantages and disadvantages. To understand which fire for a fireplace is easiest for you to make with your own hands, let's look at all these methods in order.

General description of popular methods

One of the most difficult ways is to create an artificial fire using the generated water vapor, and we will start with this method.

Steam

To create a steam plant inside your raised fireplace, you will need certain parts and electrical skills. You can look for a ready-made solution, but it will be difficult to find it.

To build a steam generator, we need the following components:

small quiet fan
DMX controller and DMX decoder - devices that allow the transfer of digital data and balance the operation of all generator systems;
light-emitting diode lamp (LED);
fog generators operating on ultrasound;
pure water;
matching box, boxing.

Installation scheme for creating an imitation of fire from steam

The principle of operation of the system for a couple is very simple. Fog generators are installed in a suitable box or box.

Pure, distilled water is poured into them, which, under the influence of a fan and a generator of ultrasonic vibrations, begins to gradually evaporate. Note that the evaporation of water occurs at room temperature, and the vapor itself is cold.

Rising steam from the evaporation of water is highlighted led lamp, and the effect of a real flame in the fireplace is obtained.

What are they needed for

Many will ask the question - why do we need such dummies? Well, first of all, it's a matter of aesthetics. And secondly, deep knowledge in the field of stove equipment is not needed to notice the difference between a hearth with an electric heating element and a wood-burning fireplace.

Due to the absence of smoke and quick warm-up rooms, electric fireplaces in the black, when compared with a wood-burning hearth. But with all this, a certain naturalness of the hearth is lost, its charm and charm are lost. If a model of firewood is added to such a design, the picture of the fireplace changes radically.

Since ancient times, people have installed a fireplace in their homes both for heating and for cooking or lighting a room. Today, these issues are solved by the heating system and household appliances, and the presence of a hearth is often decorative. Imitation of a fireplace is a good addition to the interior of a home, which fills it with beauty and comfort.

What is a fake fireplace and why is it needed

It is impossible to equip a full-fledged fireplace in a city apartment. This is due to the lack of chimney pipes, as well as the inability of the floors to withstand a large load. As an alternative, an imitation of fire is used, which can be made by hand without special skills.

Someone buys ready-made electric raised fireplaces - they are inexpensive and do not require complex installation. However, creating an imitation of fire in a fireplace with your own hands is more interesting way interior design that allows you to embody any design ideas and fantasy, turning the living room into the most comfortable part of the apartment.

Decorative fire has the following advantages:

Affordable cost. All costs are associated only with the purchase of materials.
Decor versatility. The false fireplace can be used for a whole year, and if desired, it can be modified by changing appearance.
Stylish appearance and combination with any interior styles.

Types of decorative fireplaces

A wide range of ready-made structures is available for sale. If you are not considering the option of making an electric fireplace with a live fire effect with your own hands, you can choose one of the following solutions:

Cardboard or foam portal. It is the most affordable product. In addition, you can create it yourself with minimal cost time and effort. Given the flammability of materials, it is impossible to place a fire in them. It is also not recommended to install heavy decorative objects on the structure, because. styrofoam will not be able to withstand them.
Plasterboard fireplace. Making an imitation of fire from this raw material is quite simple. The material is well processed and inexpensive. Unlike foam or cardboard, drywall is fire resistant. This allows candles to be used to simulate a flame.
plywood option. Is different stylish design and environmental safety. But in order to preserve the appearance of the portal and extend its service life, it is necessary to isolate the material from moisture.
Brick and stone fireplaces. Such species are highly decorative and durable. To create a hearth, you need to have basic skills in laying bricks or stones. You will also need to spend a considerable amount on the purchase of materials. Before installing the structure, make sure that flooring able to withstand such a weighty building.

How to make a simulated fire in a fireplace

When creating a simulated fire in a fireplace, you need to understand that it will only be used for interior decoration, but not for heating. If you need a stylish decorative element that creates a cozy atmosphere in the house, you should consider the following options:

Application modern equipment that generates water vapor.
Use of fabric and ventilation systems.
Using LCD panels or TVs.
Salt lamp illumination.
Illumination with garlands.
The use of candles.

To make artificial fire, it is allowed to use any of the listed options. But before that, you should familiarize yourself with their advantages and disadvantages.

Fire with LCD screen

The method is considered one of the most popular, because. it creates a high-quality imitation of the hearth using a TV, tablet, electronic photo frame or liquid crystal panel. The only negative is the high cost of equipment.

But special displays are available for sale that are designed specifically for this purpose. The user just needs to place the device in the right place and turn on the finished fire recording.

To increase the realism of the invention, you can use optical systems of light filters. They give the picture a lively shade, making it voluminous.

Another simulated fireplace can be improved with the help of mirrors. This option is often found in theaters. If you place mirror surfaces on the walls of the furnace and at the bottom, the simulated fire will receive a special volume and realism.

Imitation of fire using holograms

For the most subtle connoisseurs, there are holographic devices that can demonstrate a copy of the flame in three dimensions. Such systems are not cheap, but this is justified by the depth of the picture and the impressive visual effect.

Cold fire with fan

Imitating a flame using ventilation devices is an affordable and easy way to create a false fireplace. For such a project, you will need to prepare a number of materials:

Box frame made of cardboard or tin.
Patchwork fabric.
Ventilation devices.
LED light bulbs with different colors.
3 small mirrors.
optical filters.

A fan must be placed on the cardboard frame so that the air flow is directed upwards. Then, in the corners, you need to install LED bulbs and optical filters. Mirror surfaces are fixed on the sides of the frame.

Fire using a steam generator.

When creating an artificial fire based on a steam generator, you will need to prepare the following components:

3 ultrasonic fog generators.
Water tank.
purified liquid.
Cardboard construction.
RGB lighting.
Ventilation devices.

Ultrasonic fog generators should be placed inside the cardboard container and the fan should be fixed. Then you need to pour liquid into a special tank and start the fog generator. Availability lighting fixtures will create a realistic flame effect.

Made of silk fabric

To make a false fireplace from scraps of fabric, you must follow the following instructions:

A small fan should be installed in a cardboard box, and multi-colored LEDs should be fixed above it.
Pieces of mirrors are placed above the diodes - they will be used to create highlights.
Shreds of silk cloth are fixed near the fan.
The box is decorated and placed inside the fireplace.

3D image

Artificial flame looks unusual when using three-dimensional holograms. To realize this idea, it is necessary to give a three-dimensional shape to a flat picture using optical systems and LED lamps.

Artificial firewood for a raised fireplace

If an electric fireplace is installed in the room, which performs the function of heating, you will need to create an imitation of firewood. For this purpose, you can use finished products made of ceramics or other heat-resistant material. Together with LED lighting, this solution looks particularly elegant.

You can also place traditional firewood near the fireplace - they will not catch fire from the heat of the fireplace and are safe to use.

Artificial fire for the fireplace: salt lamp

interesting and useful way Arrangement of an artificial fireplace in the house is a salt lamp. Such an accessory appeared on the market relatively recently, but has already become widespread and popular. This is due to the stylish design and great benefits for human health.

To create a salt lamp, a large piece of salt with an LED lamp is used. In the neglected state, the light bulb heats up, as a result of which the salt ceiling heats up and emits negative ions into the environment. When combined with positive type ions, they neutralize them. This fills the house with favorable conditions for life.

To install a salt lamp with your own hands, you do not need to have any special skills. The main thing is to purchase such a device, decide on the color and perform the decorative part of the work.

Decorative firewood for the fireplace

To beautifully decorate a false fireplace, you need to purchase artificial firewood. They should make the design as similar as possible to the classic counterpart, which operates on solid fuel.

Stylish decorative products made of ceramics, plastic and other materials are available for sale. Since they do not emit smoke and heat during operation, this ensures environmental friendliness.

To give the fireplace stove maximum realism, firewood can be equipped with light filters with a red tint. More expensive options include internal lighting with a special flicker cycle.

effects

Modern artificial fireplaces not only replicate the look of natural options, but also have some interesting effects.

The scent of a burning fireplace

The main task of a false fireplace is to simulate a hearth of flame in an apartment. To improve the realism of sensations upon contact with such a structure, it is necessary to provide the aroma of burning wood in the room.

To do this, you will need to purchase any suitable incense or set fire to thin splinters, having previously secured the room from ignition.

It is better to place the combustion chamber under the outer panel in a closed container. It is also equipped with a forced ventilation system.

The crackle of dry logs

An indispensable attribute of the realism of the simulated fire is the characteristic sound of firewood crackling. It can be provided by recording the sound of a campfire or downloading a ready-made audio file. After choosing a natural volume level, you need to enable this sound on the MP3 player and set it to general scheme fireplace. When the structure is connected to the electrical network, crackling will start automatically.

Real heat from a cold fire

When arranging a simulated flame in the home, most people install a fireplace without heating. However, it is problematic to achieve the realism of the hearth without a thermal effect. Therefore, you can install an air conditioning system above the fireplace. However, the presence of characteristic noise can worsen the atmosphere of peace.

As an alternative, a silent air heater is suitable, which will not only improve the realism of the simulation, but also become additional source heat.

DIY decorative fake fireplace

Creating a fake fireplace is a laborious process that requires some skills and experience in construction. To build a beautiful and robust design, which will last without deformation for a long time, you should correctly draw up a drawing, calculate the amount of consumables and carefully study the step-by-step guide.

How to make a drawing and choose the right parameters

When creating a drawing of a fireplace design, it is necessary to take into account both the size of the room and the future decor element. The classic wall-mounted oven has the following parameters: the width of the lower part is 1500 mm, the depth is 345 mm, and the width of the upper part is 1490 mm.

What materials will be required

Depending on the type of fireplace, you will need to prepare a number of materials and tools for their processing. If we are talking about a drywall product, you need to buy sheets of drywall. When choosing a material, it is worth being guided by the features of the facing layer. When finishing with a slab, it is necessary to consider the option of a moisture-resistant modification. Then you need to buy support profiles, on the basis of which the fireplace frame will be assembled.

To connect the elements of the frame, you should purchase self-tapping screws. The optimal length of the fasteners is 1.4-1.6 cm. You should also prepare self-tapping screws with a countersunk head - they will be used to fix the sheets. You will also need dowel-nails for attaching profiles.

Depending on the finish finishing works wallpaper, paints and varnishes or primers and putties are selected. When tiling, you need to buy tile adhesive and grout for joints.

Quantity Supplies determined by the size of the decorative structure.

polyurethane fireplace

The option of erecting an artificial hearth made of polyurethane is one of the most affordable and fastest. For the upcoming work, you will need to buy a polyurethane portal, calculate the dimensions and complete the installation.

If used electrical device with the image of fire on the screen, you should measure it from all sides, and then create a wireframe based on the received data. It is also important to provide ways to connect to the electrical network and the reliability of the ventilation system.

plywood construction

Plywood portals are especially in demand when hiding any defects in the room, including the old heating battery. To create a frame, you should use wooden bars, and then sheathe it with plywood.

The appearance of the fireplace is determined by personal preferences and the style of the interior.

Imitation of a plasterboard fireplace

It is more difficult to build a decorative hearth based on drywall than using other materials. But in conditions of limited space, the corner drywall option may be the most optimal. A thin frame is used to create the frame. metallic profile in which holes are made for dowels or self-tapping screws. Then drywall is attached to the base, giving it the desired shape.

New life for old furniture

An affordable option for creating a decorative fireplace is the transformation old furniture. If the house has an unnecessary closet or sideboard, do not throw it in the trash. With a little imagination, you can make a good imitation of a fireplace stove out of this piece of wood.

Stages of work

To simplify the process of building a false fireplace, you need to study the sequence of actions and get to work. You will need to prepare drawings and calculations, then assemble the right materials and tools, start creating a frame. Further, it is important to provide for a communications connection scheme and perform the decorative part of the work.