Build a house from sandwich panels with your own hands. House from sandwich panels - we build ourselves, quickly and reliably. Economy class roof types

The market for materials for private housing construction today is very rich: there are bricks, and, and cellular concrete, and much more. But if the question arises of a quick, easy and economical construction of a cozy, warm, reliable home, then the choice of building materials is significantly reduced. And here comparatively comes to the rescue. new technology, quickly gaining popularity - the construction of houses from sandwich panels.

What is a sandwich panel?

Sandwich panels are popular today construction material, which is manufactured in the factory on special high-performance equipment. The panel is a structure of three layers, a kind of “sandwich”: between two sheets of coating there is a layer of insulation, and the thicker and better the insulation layer, the more comfortable the conditions in the new house will be.

For coating different manufacturers use different materials: galvanized steel, aluzinc, moisture-resistant oriented strand board, etc. Mineral wool, polyurethane foam, fiberglass, expanded polystyrene, etc. are used as insulation.

Depending on the place of application, sandwich panels are wall and roof. Wall, in turn, can be smooth, simple profiled or decorative profiled (log or siding). Roof panels are profiled on one or both sides.

Where can sandwich panels be used?

Sandwich panels are used very widely in private housing construction, while houses can be not only one-story, but also multi-story. From this material, you can quickly and easily build a house on garden plot, summer kitchen, utility rooms. First you need to build a metal frame, and then fix the sandwich panels on it.

No less popular is the technology of erecting public buildings from sandwich panels: offices, warehouses, shops, restaurants, gyms, temporary shelters for workers, gas stations. And this is fully justified: not only are such buildings built quickly and economically, if necessary, they can be easily upgraded, add an extra floor, dismantle, transport to another place, and assemble again.

Advantages and disadvantages:

The advantages of sandwich panels include:

• erection speed;
• ease of construction (does not require a powerful foundation);
• design flexibility for mobility and upgrades;
• profitability (a house made of such panels will cost two or even three times cheaper than a brick one);
• fire safety;
• environmental friendliness;
• high strength;
• excellent heat-insulating and noise-insulating properties;
• possibility of installation work in any season.

Disadvantages of sandwich panels:

• for the construction of panels, long-term heavy loads are contraindicated;
• if the installation is carried out in winter time, icing may appear at the joints;
• if there is basalt in the composition of the insulation, the strength and heat-insulating characteristics of the material may deteriorate;
• the service life of the structure of sandwich panels is not more than 50 years;
• the carrier requires protection - metal from corrosion. And wooden - from fungus and decay;
• the combination of OSB panels with expanded polystyrene or polyurethane foam is a fire hazard.

How to choose?

When choosing sandwich panels for building a house, you should pay attention to the following factors:

Type of insulation. Expanded polystyrene is an environmentally friendly, durable material that does not allow water to pass through and retains heat well. But it's a fire hazard.

Polyurethane foam - has the lowest thermal conductivity, good waterproofing properties. It is durable, impact resistant chemical substances. Minus - fire hazard.
Mineral wool is environmentally friendly, non-flammable, safe, retains heat well. Minus - low resistance to moisture, therefore, requires additional waterproofing.

Panel thickness. An increase in the volume of the slab leads, on the one hand, to an increase in thermal insulation properties, and, on the other hand, to a decrease in usable living space, complicate installation, and an increase in the cost of the material. Therefore, you need to carefully calculate the optimal thickness of the panel.

Panel geometry. Determined by the design of the building.

Manufacturer. Only a manufacturer with sufficient experience, qualifications, a good production base and modern manufacturing technologies can guarantee the quality and durability of their products. On Russian market there are about 200 manufacturing companies of this material for construction.

The largest of them are Ruukki-Vental (Kaluga), Electroshield (Samara), Mosstroy-31 (Moscow), KZLK (Novokuznetsk), Thermosteps-MTL (Samara), Trimo-VSK (Vladimir) and others. Imported products are mainly comes from England, Finland, Poland, Korea.

Sandwich panels are a building material that has great prospects and is replacing traditional materials.

Good house building for a long time. This axiom served as a guide for many years for those who wanted to acquire their own housing. It is difficult for people who value quality to come to terms with the idea that warm and secure home, which can easily withstand Russian frosts, can be erected in 3 months. The technology that originated in the United States came to Russia from Canada, a country that is also famous for its remoteness from resorts and harsh climate.

Despite the initial mistrust, progressive technology has established itself in the domestic construction industry, conquering developers with the speed of construction and quality that does not suffer from speed construction works. Turnkey sandwich panel houses are increasingly turning into an option worth considering and choosing.

house built by frame technology beneficial in all aspects

Sandwich panels: appearance and purpose

The material got its name due to its similarity to a three-layer sandwich, in which the role of bread is played by two facing surfaces, and the role of the filling is a layer of thermal insulation. The most famous type of material is considered to be SIP-panel (structurally insulated panel). Panels have found application:

In housing construction. They serve as the basis for prefabricated frame structures.

in commercial construction. For the construction of industrial and large public buildings, trade and warehouse visits, halls and car washes, panels with metal cladding are chosen.

This frameless building material, which meets all production standards, serves as the basis for houses known under the names: modular, panel, frame, frame-panel. By functionality, the panels are divided into wall and roofing.

Installation of roof sandwich panels

Wall

The panels are used for the construction of walls, interfloor ceilings and load-bearing partitions, as well as finishing material. According to the type of external profile, they are smooth and profiled. The latter are divided into simple and decorative (with the effect of siding or a log structure).

The material is applicable for insulation and reconstruction of old buildings. The key properties that determine the quality of the panels are strength and heat technical specifications, as well as fire resistance limits.

Roofing

The material is widely used in the installation, not only pitched roofs, but also other types roof structures with an angle greater than 5°. Roofing sandwich panels have a metal cladding and a wave-like profile, which increase the rigidity of the products. Profiling can be double-sided or front. Additional requirements for roof panels - durability and high load bearing capacity.

Facade cladding with sandwich panels

Decorative (finishing)

Sandwich panels for the house are widely used for cladding the facade parts of houses, finishing window and doorways(shaped elements). They have wonderful appearance, reliably isolate the building from moisture (which is especially important when installing ventilated facades) and are resistant to UV radiation. Decorative panels are made from:

Wood. Are applied to external and internal finishing works.

Plastic. Practical budget option.

Metal. They can be used for finishing loggias and balconies, during restoration and repair.

Material and design

The scope of use of the panels is determined by the type and characteristics of the materials of the shell and filler. The choice of raw materials determines the quality of sandwich panels even before the start of the production cycle.

Construction of galvanized panel

outer layer

For the outer layers, rigid sheet material with a protective coating is used; most often it is:

Cink Steel(or metal alloy). The surface is reliably protected from corrosion. A house made of metal sandwich panels is durable (the thicker the zinc layer, the more durable the structure).

Drywall. Eco-friendly (two sheets of building cardboard separated by a layer of gypsum); popular way of finishing residential premises.

Plastic. Various types of material serve reliable protection from temperature extremes, mechanical stress and moisture.

PVC. A type of plastic; due to its rigidity, it is widely used for the production of window slopes.

OSB(oriented strand board). It serves as the basis for SIP panels. The manufacturing process of the material consists in gluing wood chips under high pressure.

insulation

A common material for insulation is:

Basalt fiber (mineral wool). The most popular option with unsurpassed heat and sound insulation. Cotton wool is environmentally friendly, non-flammable and practical: it is often used in fireproof partitions.

In Finland, 40% of houses are built from SIP panels

Fiberglass. According to the characteristics, it resembles mineral wool, surpasses the ability to sound absorption.

polyurethane foam(PPU, PUR) and its modifications. Lightweight and durable material with a honeycomb structure. It is harmless to health, absolutely non-flammable and reliably protects against moisture.

Styrofoam(Styrofoam). Panels with this material are used in the construction of non-residential (warehouses, workshops, swimming pools) and residential buildings (Canadian technology). The material does not absorb moisture, is combustible, emits toxic substances in a flame, therefore it is not recommended for buildings with high fire safety requirements.

On our website you can get acquainted with the most popular projects of houses on panel-frame technology from construction companies presented at the exhibition of houses "Low-Rise Country".

Compound

The quality of houses built using the sandwich panel technology directly depends on the reliability of the connection of the elements. Joints affect the strength, appearance and thermal efficiency of panel walls. In the arrangement of the elements, a connecting lock of the popular “thorn-groove” design (tongue-and-groove connection) is used.

Classic tongue-and-groove connection

Bends (thorns and grooves) are formed when profiling external surfaces. Thanks to the locking connection, the panels fit perfectly with each other, ensuring quick installation. Manufacturers produce products with high-precision double and triple locks (the number depends on the thickness of the element). If the docking locks are of poor quality and do not fit well together, the seams will be leaky (they will lose heat).

Advantages and disadvantages of sandwich panel houses

The material began to be used in mass construction more than half a century ago. The accumulated experience allows us to draw a conclusion about the qualities of the technology. The advantages of sandwich panels include:

economy(compared to wood and brick). The cost of a turnkey house is 2-3 times less than a brick one.

Construction time. Works are 3-4 times faster than traditional methods.

All season. Installation is carried out all year round.

Ease of erection and processing. The panels are easily machined with standard tools for wood and metal.

Life time. It is 60-70 years old, the building becomes obsolete morally rather than physically.

Panel house device

Strength. Houses made of sandwich panels are not afraid of hurricane winds and earthquakes. The design can withstand a load of up to 10 t/m 2 vertically, transverse - 2 t/m 2 .

Thermal efficiency. The thermal insulation properties of a wall made of SIP panels are equal to the properties brick wall 2 m thick. With the same thickness panel house warmer 5 times.

Moisture resistance and tightness of the structure.

Resistant to temperature extremes and ultraviolet.

Environmental Safety.

Disadvantages of sandwich panel houses:

Construction features. The house is assembled as a children's designer, each element requires an exact fit (otherwise the thermal efficiency will suffer).

Insufficient soundproofing. Eliminated by interior and exterior trim.

Frame features. The metal supporting frame must be additionally protected from corrosion, wooden - from decay.

A house made of sandwich panels needs a well-thought-out ventilation system

On our website you can find contacts of construction companies that offer the service of building houses using panel technology. You can directly communicate with representatives by visiting the exhibition of houses "Low-Rise Country".

Insulation features. Mineral wool absorbs moisture and can be deformed, polystyrene foam is flammable.

Instability to mechanical damage.

Low level of ventilation. Eliminated by installing a ventilation system.

Unprofessional installation. It is the cause of heat loss during the operation of the house (in winter, freezing of the joints is possible).

On our site you can find the most popular house projects from construction companies represented at the exhibition of houses Low-Rise Country.

The project of houses from a turnkey sandwich panel

Every year more and more people decide to build a house from sandwich panels, taking into account the benefits not only during construction, but also during operation. Construction companies offer turnkey sandwich panel homes with designs and prices that cater to a wide range of tastes and budgets. When concluding a contract, the company prepares a house project taking into account the wishes of the client and performs a full range of work. Construction goes through several stages.

Ready-made standard project with calculated cost and price

Project selection

At the customer's disposal are extensive catalogs with projects of various formats. Within any budget, you can choose a house based on the area, architectural style and additional options (type of finish, type of roof). Panel technology makes it possible to implement any architectural ideas, design ideas and interior solutions.

For the selected project, a preliminary cost calculation is made. A house made of sandwich panels is a great way to save on:

Time. The implementation of an object from sip panels will require up to 3 months.

Foundation and excavation. A massive (and expensive) foundation is not needed.

Rental of heavy construction equipment. She is not needed.

building materials.

The widespread construction of houses from sandwich panels began to spread in our country relatively recently. Western countries have been using this technology for many decades to build not only private low-rise buildings but also for the construction of high-rise buildings.

In this article, we will look at what kind of material it is and what are the pros and cons of houses built using this technology?

What is a sandwich panel and what does it consist of?

The main idea of ​​the developers of this material is to get a building element with which you can build a house quickly and inexpensively. The technology of building houses from sandwich panels allows you to get a full-fledged housing of any complexity, in a short period of time, using a minimum of material and physical costs.

The term "sandwich" itself has nothing to do with fast food. Since this building material consists of several layers of sub-materials fastened together, this name arose more as an association with burgers.

Sandwich panel- This is a three-layer building material made of plastic, metal and insulation (wood, mineral wool, polystyrene foam). Usually, inside there is a special filler, which is closed on both sides with a lining. The result is a convenient element with which you can build walls, ceilings and floors. Also, this unique building material is used not only for finishing walls and roofs, but also for high-quality insulation and sound insulation of the facades of finished buildings and structures, as well as for protecting them from fire.

Various materials can be used as a filler. Among the most popular options are the following:

• polyurethane foam- This is the most common filler for sandwich panels. The material does not burn or rot. At the same time, it is an excellent heater;
• Styrofoam- This is a less common filler option. Such panels are slightly cheaper than the previous ones;
• Fiberglass. Such a filler is used in those structures that will be installed in fire hazardous buildings;
• Mineral wool. Such sandwich panels are considered the cheapest. But even they are distinguished by their lightness, ease of installation and good thermal insulation qualities.

The outer layers can also be made from various materials. The most popular are OSB-plates and metal. In principle, both options are quite strong and durable. However, OSB boards are slightly cheaper than the metal version. But the second option has a longer service life.

How are houses and cottages built from sandwich panels?

The responsible process before starting the construction of houses, according to the technology, is the creation of a solid foundation and a frame for covering it with sandwich elements.

The whole process of building a residential building can be divided into stages:

1. Walling. The beginning of the process will mark the laying of the guide board, its dimensions correspond to the dimensions of the sandwiches. For the exact horizontal position of the board, builders use the building level;
2. Installation of corner sandwich panels. The process should start from the corner. The installation of the first element is an important task; further work on the installation of subsequent sheets depends on it. The guide board is equipped with special grooves that allow you to securely fasten each sheet of the sandwich panel. Corner sheets are fixed with self-tapping screws. The distance between fasteners must be at least 15 cm;
3. Installation of sandwich panels. After completing the finishing of the corners, proceed to the processing of the walls. The panels are fastened to each other with self-tapping screws, keeping the distance between the fasteners in height of at least 50 cm and carefully making sure that there are no gaps between the sheets. Using this technology, all subsequent sheets of finishing material are installed.

In the process of assembling houses from sandwich panels, there should not be a rush, all work is carried out gradually. It is important that, before fastening, each subsequent element is compared in size with the previous one in order to immediately identify inconsistencies and correct them.

Building foam is sometimes used to fill the space between the guide board and the panel. After completing the finishing of the base of the house with sandwich panels, they begin to build other elements of the house.

Advantages of building from sandwich panels

(1) First of all, this foundation savings. It is known that about half of the cost of building a box at home falls on foundation work. When building a house from sandwich panels, you can use a columnar foundation, a shallow strip foundation or a light slab foundation.

(2) Construction speed. Such a house can be assembled according to ready-made drawings in a few days. Usually, manufacturers of such structures bring the walls ready-made and fasten them together on the site.

The box itself at home can be put up in just one to two weeks. Of course, much will depend on the size of the building. But in any case, the construction will take much less time than if you used ordinary building materials.

(3) The third advantage is heating savings in future. Sandwich panels are warm enough to build homes in the coldest regions of the country.

(4) Buildings made of sandwich panels are quite durable. Despite the fact that such houses are considered to be not the most durable compared to stone ones, practice shows that, with the right construction technology, they can be used for decades. Manufacturers of such houses dry the timber in a special way to such an extent that the wood is practically indestructible.

(5) I have an opportunity increase usable living space, since the thickness of the walls of cottages made of sandwich panels is much less than in houses built of stone or blocks.

(6) The sixth advantage - Cottages from sandwich panels can be built in almost any weather conditions. The construction of the house can be carried out in winter, regardless of the ambient temperature;

(7) The seventh plus - unlike wooden houses, frame structures do not settle. This means that finishing work can begin immediately after the construction of the box;

In addition, if necessary, it is possible to disassemble the house and reassemble it in a new place. In addition, do not forget about the cost. All materials and works will not hit hard on your wallet. Houses made of sandwich panels are much cheaper than their counterparts. This feature is strongly liked by domestic developers.

The disadvantages of this material

First of all, it is worth mentioning the environmental friendliness. Some unscrupulous manufacturers wood boards formaldehyde resins are used to bind fibers. This substance, being very toxic, when evaporated, can greatly affect the health of people living in such a house. Make sure that the manufacturer of sandwich panel houses has a contract with a bona fide supplier of wood-based panels.

Houses made of sandwich panels are significantly inferior in terms of durability to wooden and brick buildings. Such buildings need to be overhaul after a couple of decades of operation. But, even if you constantly maintain all the structures in the right condition, you should not expect from such a house that it will stand for a hundred years.

Another disadvantage that also affects long-term operation is the possibility of mold. Sandwich panels are quite tight, so air ventilation is poor. From here there are places where moisture stagnates. The result of this is the appearance of mold. Therefore, such houses must be carefully protected from moisture and artificial ventilation systems must be created.

Well, don't forget about fire safety. The materials used often burn well. Fully wooden house, in the event of a small outbreak, it will burn to the ground in a matter of hours.

Often the manufacturer claims that the wood is treated with a special solution that makes it non-combustible. But be aware that such solutions do not exist in nature, and all such events are carried out only in order to reduce the burning rate. It is also worth remembering about the foam, which does not burn, but evaporates. Styrofoam fumes can also cause irreparable harm to health.

Therefore, it is necessary to carefully choose the heating system of the house and it is highly desirable to install a modern fire protection system with an alarm button.

Conclusion

It is possible to build a cottage or a house from sandwich panels, and often this is the only reasonable option for a particular area, taking into account the available budget. However, you should carefully consider fire safety and make sure the quality and environmental friendliness of the material of the panels. You also need to carefully approach the selection of a construction contractor, make sure that you have a license, relevant experience and positive reviews.

The construction of a house from unified elements of a large area, but of low weight, is very attractive in many cases.

For example, for the construction of industrial, commercial or auxiliary buildings, this option is optimal.

A striking example of such building materials are sandwich panels, which make it possible to build quickly, relatively cheaply and quite efficiently.

The work is carried out with minimal need for equipment, requires little time, does not require the participation of highly skilled workers, which makes the construction very economical.

Sandwich panels are two layers sheet materials(profiled metal, PVC, OSB or magnesite boards), between which a layer of insulating material (mineral wool, polyurethane foam, expanded polystyrene, etc.) is installed.

The dimensions of the plates are different, with a width of 1-1.2 m, the length of the panel can be from 50 cm to 13.5 m. The thickness of the panels depends on the size of the insulation and ranges from 5 to 25 cm. Such dimensions with low weight ( square meter the thickest panel weighs only 42 kg) allow you to build buildings in a matter of days or hours.

The most common are panels with outer layers of profiled metal with a thickness of 0.5-0.7 mm. The surface has a protective and decorative polymer coating that is resistant to external influences and protects the metal from corrosion.

Two types of panels are produced:

• Wall. They have a small profile wave height, withstand large compressive or shear loads. lock connection folded.
• Roofing. They are made with an increased profile height (usually trapezoidal). The lock connection provides overlapping of the front layer with an overlap on one wave.

The panels are connected using locking profiles applied to the side edges. The end sides are usually open, during installation, the joints are filled with sealant and special flashings are installed on top. The panels are mounted on a supporting structure - a frame, the bearing capacity of which ensures the strength and stability of the walls and roof to all loads.

NOTE!

There are types of sandwich panels that have self-supporting properties and do not need a frame.

Photo of sandwich panels:

Advantages and disadvantages

The advantages of sandwich panels include:

• Possibility of installation at any time of the year.
• High installation speed.
• No finishing work.
• The light weight of the building allows you to save on the foundation.
• The high heat-saving qualities of the panels help to save on heating the building.

There are also disadvantages, which should be:

• The impossibility of multi-storey construction.
• Weak bearing capacity of the walls, the inability to use them for installation attachments, furniture or other items.
• Possibility of damage to the protective coating during installation or transportation.
• The need for careful sealing of panel joints, the possibility of condensation.

Some deficiencies are unavoidable, others can be easily eliminated - for example, damage to the coating can be painted over, in the most difficult cases the entire panel can be replaced.

What are the advantages of sandwich panel houses

For the construction of residential buildings, SIP panels are most often used. This is a type of sandwich panel, the outer layers of which are made of OSB, or oriented strand board.

Houses built from SIP panels have a lot of advantages:

• Walls made of such material have high heat-saving properties, they are light, do not load the foundation.
• Since the construction of SIP panels cannot be higher than 2 floors, which is prescribed by the regulations, the use of construction equipment is not necessary. Usually cost the simplest lifting devices.
• Any materials are suitable for exterior decoration, and, as a rule, there is no need for external insulation.
• The cost of construction is much lower than with traditional materials.
• The panels do not contribute to the appearance of fungus, mold or insects.
• Communication is not difficult.

In addition, high speed and a small number of workers needed to complete the installation contribute to the growing popularity of sandwich panel construction.

Prefabricated buildings

Buildings constructed from sandwich panels are classified as prefabricated buildings.

The main type of such buildings is non-residential industrial or administrative buildings.:

• Warehouses.
• Public spaces.
• Sports or fitness complexes.
• Car dealerships.
• Commercial or entertainment centers.
• Industrial refrigerators.
• Hangars for large aircraft or automotive equipment.

The construction of housing of their sandwich panels is gaining more and more popularity. For users, low cost, speed of construction and undemanding to the presence of a powerful foundation are increasingly attractive.

The construction of prefabricated buildings is carried out according to a standard scheme:

• erection metal frame from unified elements, giving the possibility of a wide combination of assembly options - as if from a children's designer.
• Installation of sandwich panels. Installation of panels takes a matter of minutes, most of the time is taken by sealing the joints and installing additional elements.
• Installation of roof panels, decoration of overhangs and other elements with extensions.
• Decoration of window and door openings.

All work is done at a very high pace. The main labor costs and financial investments fall on the construction of the foundation, the cost and type of which is determined by local geological conditions.

modular buildings

Modular buildings are one of the fastest and most efficient options for the construction of prefabricated buildings. The building is being built from ready-made modules - block containers, ready-made parts of a residential building with a finished factory exterior and interior finish.

Such projects are effective and very convenient for shift camps, construction sites of large facilities, geological exploration sites, meteorological or other scientific stations, etc. Modular buildings gained particular popularity in the regions of the Far North, in the development of oil or gas fields.

Buildings can be dismantled, transported and reassembled elsewhere without any damage. The configuration, dimensions of the house can be changed. You can attach any part of the house, or, conversely, reduce its size. Such mobility, combined with the ability to transform, is appreciated by builders and workers.

Trade pavilions

The ability to have your own point of sale and not pay a huge rent is a significant bonus for any businessman, be it a beginner or an experienced and successful one. T the trading pavilion is convenient for business in that it has precise specifics and random people do not enter it.

In addition, the pavilion is in plain sight, and not among hundreds of similar ones in a large center, so the probability of successful trading in it is much better.

For the construction of a trade pavilion, sandwich panels are the best option. The main advantage is the speed of construction - all the time is spent only on the construction of the zero level, and in some cases this is not done.

For example, when using a pile or pile screw foundation, the speed of construction is measured in a matter of days, which is an invaluable advantage for trading activities. For small pavilions, a shallow strip foundation is usually made, which does not require a significant investment of time or money.

With a small pavilion, its cost will be comparable to the price of a used car, and the functionality of the building will be completely similar to an expensive capital building.

NOTE!

There are a large number of organizations that perform the installation of pavilions from sandwich panels at low prices in the shortest possible time. If there is no time or opportunities self construction, such an option would be an excellent way out.

Is it worth making a cottage or a private house from sandwich panels?

The use of sandwich panels for housing or country houses in our country is not yet very popular. This is due to the traditional thinking and distrust of innovations that exists among the population..

At the same time, most private houses of the budget price category abroad are built using this or similar technology, which indicates the great potential and high performance of sandwich panels.

Moreover, almost all buildings in the north of Europe - in Finland, Norway - are built from sandwich panels. Finally, in Antarctica, all scientific stations are built in this way, and there are no complaints about their quality.

At the same time, there are a lot of advantages, from the speed of construction to the cost-effectiveness of construction. The specificity of the panels is such that they are most suitable for low-rise housing. If we also take into account the possibility of independent construction, without the use of construction equipment or a large team of workers, then the benefits of this method become obvious.

The network very often raises the question of the harmful effects of sandwich panels (in particular, SIP panels) on human health or well-being. Some argue that the inhabitants of such houses live in a cloud of formaldehyde, others scare the people with phosgene released from the insulation.

At the same time, no one knows where this information came from, everyone read it somewhere on the Internet. Nobody tried to acquire exact knowledge about the amount and composition of the emitted substances. At the same time, many people live in houses insulated with mineral wool or polystyrene, everyone is alive and well and has no problems.

The practice of foreign construction under conditions of very strict sanitary or technical requirements completely refutes these assertions. The technique would not have found such wide distribution if any negative effects or manifestations were observed.

No material company wants to drown in health loss lawsuits, so you can be quite confident in the quality of the material.

Useful video

In this video you will learn what are the houses of sandwich panels:

Conclusion

Sandwich panels are an affordable and very convenient building material that allows you to build houses of any configuration in a matter of days at no extra cost. The ease of installation work is enhanced by the possibility of restoring or replacing panels, savings on construction are greatly enhanced by lower heating costs.

The construction of sandwich panels has great potential, they have not yet fully revealed their abilities to Russian consumers. Popularity and demand are constantly increasing, making panels an increasingly successful building material.

In contact with

LLC "NIAL-SK" offers services for the construction of houses from sandwich panels in the Russian market of low-rise construction and industrial facilities.

The term "Canadian technology" is the construction of objects and houses from sandwich panels. In Russia, North American technology has appeared relatively recently, but has already conquered a certain market segment. Today, we can confidently evaluate all the positive aspects of this development. Canadian technology materials are used that meet the following characteristics: strength, reliability, durability, unique thermal insulation and many others.

All technical parameters of these buildings are ideal for Russian conditions - low air temperatures do not require high costs for space heating due to low thermal conductivity and high thermal insulation of SIP panels. And mobility and ease of installation guarantee a short time for the construction of the facility.

Only modern materials

We apply modern technologies construction of sandwich panels, adhering to all applicable standards and regulations. By choosing us as a contractor, you will save time, money and get a comfortable and warm home.

Our organization always fulfills its obligations to customers on time on the basis of a concluded contract and an approved estimate, taking into account a flexible system of discounts and optimal solutions for each object.

Sandwich panel construction - not only at home

Our company offers you to make a choice and build a turnkey house from sandwich panels, as well as garages, change houses or other outbuildings. Technical capacities of production allow to carry out construction of cottage settlements. The construction of objects is carried out both according to ready-made standard projects, and according to individual sketches or the wishes of customers.