Residents of the post-Soviet space steadfastly associate a flat roof with multi-storey typical buildings. Modern architectural thought does not stand still, and now there are many solutions for private houses and cottages with a flat roof that look no less interesting than pitched structures.

Features:

Cottage with a flat roof has a stylish and modern look... Basically, such designs are stylized in a special way, choosing the directions of minimalism or high-tech. Traditional styles for buildings with such a roof will not work, since such roofs have been properly beaten quite recently, therefore, any of the classic directions will look ridiculous here.

Of particular interest is how the roof will be used: either for its intended purpose, or as an additional open tier-terrace. It is necessary to decide in advance on this issue in order to correctly draw up a project plan.

Materials

For the construction of 1-storey cottages with a flat roof are used various materialshowever, it should be borne in mind that not all of them are suitable for the Russian climate. In winter, a large amount of snow falls on almost the entire territory of Russia, which greatly increases the load on a flat roof. Therefore, walls cannot be made of lightweight and insufficiently strong materials. In this regard, popular frame buildings will not work, but there is another prefabricated option.

Materials for floors and walls are different. If almost all durable types (monolith, brick, wood) are suitable for walls, then for the roof you will have to choose the type of construction raw materials more carefully.

Reinforced concrete slabs

Hollow or flat reinforced concrete slabs are used in modern construction for floor slabs. They are strong enough to support the weight of a flat roof.

Plates have many positive qualities:

• strength;
• durability;
• good sound and heat insulation characteristics;
• quick installation;
• resistance to corrosive phenomena.

photos

The main disadvantage of the material is that it is produced only in standard sizes, this must be taken into account even when creating a project. Reinforced concrete slabs are suitable for floors only in a house that has a reinforced foundation.

Corrugated board

For floors, a special corrugated board is used, which is called carrier. As with the previous version, it is perfect for installation as a flat roof. Bearing corrugated board is very popular mainly because of its low cost. This material costs significantly less than all the others. However, the low price did not prevent it from establishing itself as a durable and versatile material that has an excellent ability to withstand the heavy loads that a flat roof is subjected to.

The load-bearing corrugated board weighs much less than reinforced concrete slabs, therefore it is optimal for creating flat roofs in the middle climatic zone with little precipitation in winter.

Monolithic concrete

This material is rarely used for floors due to the complexity of installation. Here you first need to prepare the mixture, after which you can pour. Only true professionals can do this. However, it should be noted that monolithic concrete as a flat roof it is perfectly operated, but only on condition that the manufacturing and installation technology has been fully followed.

It is not customary to build modern one-story houses with a flat roof from traditional materials. For this, modern designs are best suited, which can withstand both harsh winter and summer heat. At the same time, it is easy to work with them, and the construction itself does not take much time.

SIP or sandwich panels

In the catalog of every self-respecting construction agency there are standard projects one-story houses with a flat roof made of SIP panels. Please note that it is best to order cottages made of this material. Construction requires adherence to a special technology, so it can be difficult for a beginner to work with sandwich panels.

Speaking about the advantages of panel houses, one can note their low thermal conductivity and high noise insulation characteristics. Construction costs much less than brick. In this case, the rejection of the pitched roof also plays a significant role.

Flat roof

We are all used to seeing flat roofs only in Soviet-built multi-storey buildings. There is an opinion among many that such roofs are boring, and a real house should only be equipped with a pitched roof. In light of recent architectural developments, this belief can be argued, especially when you remember the many advantages of such roofs.

It should be noted that one-story houses with flat roof it will turn out to stylize only in a modern direction. The flat roof itself looks futuristic, and you need to use this free space.

Benefits

Among the advantages of flat roofs are many characteristics.

• Ease of installation. Flat roof structures can be completed in record time.
• Reliability. If you organize your roof in the right way, it can support a lot of weight. Moreover, in which case, repairing such a structure is much easier than repairing the rafter system.
• Excellent thermal insulation. Regardless of what type of flat roof structure was chosen, it will perfectly retain heat inside the house.

• Cheapness.Compared to pitched ones, flat constructs are much cheaper both in terms of materials and in terms of time.
• Easy to install equipment. Antennas, air conditioners, various service communications on a plane are much easier to place than on a slope.
• Interesting view. If the house itself is decorated in the style of "minimalism", then a laconic roof without a slope will perfectly complement general form.
• Additional area.If desired, the roof can be reinforced and used to organize space for a playground, garden or recreation area. Some even make a swimming pool here.

disadvantages

There are not so many disadvantages, but they are still there.

• As good as the roof is, there is always a chance that it will leak. In the case of a flat structure, the risk increases many times over, because it is subject to heavy loads due to the fact that the snow does not roll.
• If you plan to use the cover for your own needs winter period, snow and ice will have to be cleaned by hand.
• The erection of the roof of a flat sample must be carried out in full compliance with the technology, otherwise there is a risk that it will leak or cannot withstand the loads and collapse.

Varieties

Non-pitched roofs are divided according to several criteria, including the method of use and the type of laying of materials. As a rule, the name of each of the characteristics speaks for itself.

By way of use

Roofs can be exploited and unexploited.

Operated roofs are those that are used not only as roofs, but also as additional space for pastime. Reinforced systems are used here, allowing not only to place heavy equipment on the roof, but even to organize a "green corner" here, planting a lawn, flowers and even trees. Equipping a structure of this type costs quite a lot, while it is important to plan in advance in the project what weight load the roof will be subjected to.

Unused roofs are much cheaperdue to the fact that they do not need to be additionally reinforced and equipped with waterproofing. The only thing you need to pay attention to is the snow loads that the roof will be exposed to in winter.

By type of stacking materials

A distinction is made between classic, inversion and breathable roofs.

The classic types are usually used in the design of unexploited roofs. This is due to the fact that they have a lower coefficient of resistance to loads. Moisture or mechanical stress can be detrimental to these roofs.

The layout of the layers looks like this (from top to bottom):

• top surfaced material (waterproofing);
• bottom material to be welded (waterproofing);
• screed (if provided);
• insulation;
• vapor barrier layer;
• overlap.

Thus, an unprotected waterproofing layer quickly deteriorates.

The inversion roof looks exactly the opposite, as the name suggests:

• ballast (gravel, crushed stone or other heavy material);
• vapor barrier;
• hydrophobic insulation;
• waterproofing;
• protective substrate (primer);
• overlap.

These flat roofs have a long service life and are ideally suited to the roofs in use.

Breathers can be both classic and inversion designs.They are equipped with aerators or deflectors to provide additional ventilation, because there is no gap between the flat roof and the house, as is the case with pitched roofs. This leads to insufficient air exchange, which is why the organization of the ventilation system is so important.

Project

When drafting a one-story house with a flat roof, it is extremely important to pay close attention to the type of roof. Here the roof is the most important component. Russian firms have been engaged in such design not so long ago, so contact only trusted agencies.

Flat roofs are used in both multi-storey and low-rise urban buildings. They allow you to save on lumber, since they do not require a bulky rafter system, and the installation of insulation and roofing is carried out on the floor slab of the upper floor. For drainage on a flat roof, a slope is created along which excess moisture flows into the pipes of the internal drainage system. IN suburban construction flat roofs are also used and on some of them an exploitable structure is mounted. We will tell you about the features of the layout of such houses, consider some options for their arrangement and operation.

Features of the layout of houses with a flat roof

For the climate middle band houses with flat roofs are not the most popular choice, but at the same time, the unusual design finds fans, and the ability to equip a recreation area on the roof makes projects of this kind attractive. Buildings with flat, exploited roofs have their own advantages and disadvantages and are used in areas with moderate snow formation and relatively mild climates. The advantages include:

• original appearance;
• the absence of a complex and bulky rafter system, subject to wind influences;
• the possibility of using a flat roof as an exploited space;
• the absence of an external drainage system on the facades of the building, since an internal drainage system is used instead.

Flat roofs also have some disadvantages, namely:

• increased requirements for the strength of the floor, which must withstand the weight of the snow;
• the need to create a slope towards the drainage pipes, which means that there will be an increase in the mass of the roofing cake;
• high quality requirements for multilayer waterproofing;
• frequent preventive and major repairs.

Design and arrangement of flat roofs is carried out on the basis of the standard СО 002-02495342-2005 “Roofs of buildings and structures. Design and construction ". This document outlines the principles for designing a roofing pie and methods for constructing flat roofs. When creating a project, it is necessary to take into account not only the presence of ventilation ducts, but also drainpipes through which moisture is removed from a flat roof.

A flat roof allows you to create a cozy living space with the same or different ceiling heights for a comfortable stay

The standard СО 002-02495342-2005 pays attention to the exploited and inverted roofs with earth and grass coverings, as well as methods of waterproofing and additional testing for the strength of flat roofs according to SNiP 2.01.07. An additional soil layer with waterproofing, paving slab paths and the presence of a fence require reinforcement of the floor structure, as well as the construction of a flight of stairs to access the roof. On flat roofs, it is necessary to make a slope of 2 to 5 degrees towards the downspout to ensure the outflow of excess moisture.

An exploited roof implies a multi-layer structure of the roofing carpet and a specific design of the drainage system funnel

Overlapping a flat roof is made in one of the following ways:

1. With standard reinforced concrete slabs.

   Overlapping of a flat roof with standard reinforced concrete slabs is carried out with sealing of seams and installation of a reinforced belt

2. Continuous concreting of the armored belt and reinforced floor with support on the internal partitions and external walls of the building.

   Continuous concreting of a flat roof is carried out with support on the load-bearing external walls of the building

3. Reinforced concrete slab using corrugated board and support on load-bearing steel beams.

   Beams to create a flat roof slab are attached to load-bearing walls, and on them corrugated board and reinforcement are laid, then concrete is poured

A solid ceiling makes it possible to place telecommunications equipment, ventilation and air conditioning systems on a flat roof, as well as equip the exploited space. The layout of a house with a flat roof is influenced by the internal placement of the drainage system, heating system flues, staircases, as well as the location of the garage. Roof ladders can also be installed on the outside of the building, which significantly increases the living space.

Photo gallery: examples of the layout of houses with a flat roof

The first floor of the house can be equipped with flights of stairs and has ample living space
The second floor of the house can be equipped with access to the terrace and to the exploited roof
The plan indicates the placement of ventilation, drainage and chimney pipes in a house with a flat roof
The house can be equipped large garage, living room and kitchen

Video: features of the layout of a house with a flat roof

Examples of projects of houses with a flat roof

Flat roof houses have been used in panel urban construction for many years. With the advent of new high-strength waterproofing materials, it is not difficult to equip such a structure on a building of any number of storeys, built from different materials... In suburban construction, it is quite difficult to break the stereotype of fear of snow load on a flat roof. It should be noted that the strength of the reinforced concrete floor exceeds any of the pitched roofs, the rafter system of which is made of lumber.

Flat roofs are successfully used in both multi-storey and low-rise buildings

Buildings of this type have a complete appearance and a laconic design. Consider examples of flat roofs on houses of different storeys, built in different styles and from various materials.

One-story houses

One-story buildings are designed for a small family and their seeming small size does not interfere with placing the space necessary for a comfortable existence under a flat roof.

One storey flat roof house suitable for a small family

A ventilation system shaft and a chimney are brought out to the roof, and excess moisture is discharged through a drain pipe on the facade, which does not spoil the overall appearance of the house. The owner of such housing should keep in mind that over time, the living space may need to be expanded, therefore, certain areas must be reserved for this.

The design of the house with a flat roof allows you to expand the living space by adding a garage and terrace

Two-storey houses

For two-storey house typical layout, in which on the ground floor there is a garage, a hall, a living room and a kitchen space with a dining room. On the second floor, they equip an office, a recreation area with a large open loggia or a terrace. Having cars in the family means equipping the driveways.

A two-storey house with a flat roof allows you to accommodate all the necessary spaces

In houses of this type ventilation ducts, chimneys and gutter system are combined into one block and located inside the building, and the garage room is equipped with a separate ventilation duct. The dwelling is intended for year-round living and has all the advantages of its own suburban structure.

With a light color, a two-story concrete structure can be made weightless in appearance

House with exploited roof

An exploited roof implies the use of a more durable ceiling of the upper floor, multi-layer waterproofing and a strong fence. On such roofs there are recreation areas with a solarium, lawn and other vegetation. In addition, technical blocks with air conditioning, ventilation and telecommunication equipment are placed in the exploited part of the roof.

An exploited roof requires reinforced overlap and multi-layer waterproofing to effectively drain excess moisture

On some part of the area paving slabs, furniture and light sheds are installed, so the total weight of the roof in use must be taken into account when building the floor. Subject to installation technology and use quality materials such a roof can last for many years in the climate of the middle zone.

Photo gallery: houses with an exploited roof

An exploited roof makes certain demands on the structure of the roofing cake
Minimalist architectural solution creates an unusually cozy space on a flat roof
The multi-storey exploited area provides ample opportunities for creating a solarium and a separate recreation area
A soft corner can be placed on the flat roof of the house where you can receive guests
Place a dining table on the flat roof and enjoy the scenery while eating
On the flat roof of a multi-storey building, you can create a place for rest and play

Prefab houses with flat roof

Prefabricated frame houses must have a solid overlap of the upper floor, which is carefully sealed, since the frame parts can rot in the event of moisture penetration.

The frame house is distinguished by a high construction speed and low material costs, but requires careful attention to the strength and waterproofing of the floor

When arranging a flat roof in houses of this type, you should carefully consider matching the snow load with the strength of the building and the reliability of the second floor overlap.

The project of a frame building with a large living space and a solid appearance fits perfectly into the surrounding landscape

High-tech houses

Stylish, light, flying structures, sparkling with glass and nickel-plated metal, austere concrete structures and wide staircases leave an unforgettable impression of high-tech houses. The building seems to hang without any support, has large windows, high ceilings and a large interior space.

High-tech houses are distinguished by an abundance of light, glass, metal and concrete

A house built in this style is expensive and very laborious to manufacture, since it is a monolithic concrete structure.

Photo gallery: high-tech houses

The maximum open space of the house with an abundance of glass and concrete gives comfort
The concrete setting of the sunset looks very impressive.
Transparent tinted glass and painted concrete construction for a futuristic look
A large flat roof area allows, if desired, to create a recreation area there
A high-tech house can consist of two parts connected to each other
A flat roof in high-tech houses looks stylish

Houses from vulture panels

Thermal insulating sip panels are easily and quickly mounted in any weather using vertical posts and have significant strength. A house built from panels needs a solid floor with good waterproofing.

Houses with flat roofs made of modern sip panels are quickly built and have good thermal insulation

From vulture panels, you can quickly build reliable buildings of various configurations.

A two-storey house made of vulture panels can be quickly assembled according to any architectural project on a lightweight foundation

Wooden houses

A house built from logs or beams is durable, warm and environmentally friendly. Wooden houses it is possible to bring it under a flat roof with the condition of fire retardant and antiseptic impregnation of the structures of the last crown and overlap of the upper floor.

IN wooden house breathable and the flat roof completes the rectangular design

Flat roof drainage is performed by pipes located both inside and outside the building.

A wooden house with a flat roof blends very organically into the surrounding space

Houses from foam blocks

A budget option for a house made of foam blocks with a monolithic reinforced concrete frame. A reinforced concrete belt is arranged along the upper part of the walls of the second floor, and a flat roof overlap is laid on it and on the internal load-bearing walls.

Warm and economical houses foam blocks are often completed with a flat roof, which is a logical continuation of the architectural style

Drainage systems, ventilation ducts and chimneys are mounted inside the building and are not displayed on the facade. The strength of such a house allows you to equip an exploited flat roof.

The concrete foundation and floors with the walls of the house can be built of warm foam concrete with a natural stone finish

Modular houses

These houses are assembled from a standard set of ready-made modules, arranged in the required order. Such buildings are equipped with flat roofs and have good heat-shielding properties.

Modular house - a building that is assembled from standard block-modules and connected into a single whole, depending on the functional purpose

Modules are created on the basis of ready-made functional elements and are designed into a single building with a suitable stylized finish.

The module is a self-contained unit with a specific purpose and living space is assembled from such modules

Photo gallery: modular flat roof houses

The flat roof of a modular house does not require special maintenance
If necessary, the modular house can be transported to another location
A large area of \u200b\u200ba flat roof of a modular house will make it possible to create an exploitable area on it
A modular house can be built from sustainable materials
You can create a terrace on the roof of a modular house

Houses made of reinforced concrete panels with flat roofs

This type of house includes all urban development and some types of low-rise suburban buildings. A high degree of standardization allows houses to be erected using a set of panels and floor slabs, as well as to build flat roofs using specialized blocks.

Panel houses are highly durable and are prefabricated buildings of the standard type.

Reinforced concrete products have not only strength, but also high thermal insulation characteristics.

Standard concrete products allow you to mount a building of any complexity with a flat roof

House projects

Flat roof house projects

Country or country houses with a flat roof are attractive architectural solutions that suit customers with different needs and budgets. Though pitched roofs for cottages are traditionally very popular in Russia, today more and more the choice is made in favor of originality. The flat roof not only looks exclusive and modern, but also perfectly fulfills its main functions. When used correctly, it reliably protects against precipitation, provides good heat and sound insulation. The online store Proekt-Shop offers a large selection of flat roof house projects. The site contains well-thought-out solutions with different layouts. All projects were developed by our experienced specialists.

Roof design and operational features

The roof can be called flat, even if it has a slight slope. Such a difference in height is necessary to drain rain or melt water. If it is not available, drainage of another design is provided (for example, a drainage system). When choosing a flat-roof cottage project, it must be borne in mind that such houses have a number of operating features. For example, in winter snow can accumulate on them: it must be removed promptly to avoid leaks. In addition, in such houses it is important to ensure that the roof is airtight and that the insulation does not get wet.

Benefits of a flat roof

Aesthetics... The houses built according to the projects presented in this section are distinguished by their original and stylish appearance. The abundance of flat surfaces, strict forms and laconicism - all this makes them unlike the neighboring buildings. Such projects will be an excellent choice for those who appreciate the uniqueness in the design of the space around them.

Profitability... The total area of \u200b\u200ba flat roof will be significantly less than that of a pitched structure for a similar house. Therefore, when choosing such a project, you can save on materials, and in some cases, on a simpler installation.

Additional area... Projects of houses with a flat roof are suitable for those who want to equip a comfortable space for outdoor recreation. Here you can sunbathe, play sports or even receive guests. An additional site is also suitable for placing solar panels, ventilation elements or other engineering systems.

Variety of projects of cottages with a flat roof

In the online store Proekt-Shop, you can find a solution for every taste. Our catalog of flat roof house projects presents options for building from different materials. Most often, aerated concrete and foam blocks are used for such buildings, frame buildings are also popular. Projects differ from each other in terms of total and living space, number of rooms, garage and terrace. When choosing suitable option the number of family members is taken into account, the need for the arrangement of additional premises: work rooms, playrooms, gyms etc. The Proekt-Shop online store offers a large selection of projects of one-story houses with a flat roof. As a rule, these are options for buildings that are compact in area, which are suitable even for small areas. Attics can be used to accommodate additional rooms. The assortment also includes projects two-story houses with a flat roof.

Stylistic features of cottages

Based on 3D models and photos of flat roof house projects, you can evaluate the appearance of such buildings. Most of them are characterized by the use of straight lines and non-classical shapes. Projects of houses with a flat roof in modern style can be performed in different directions:

• high tech,
• constructivism,
• minimalism,
• cubism, etc.

Such external design of buildings is often combined with the use of innovative technologies in the arrangement of engineering systems, such as solar panels. Also, the design indoor spaces houses are also often made in high-tech style.

Project order in Proekt-Shop

To buy a set of documentation for building a dream home, leave a request on the website. We offer competitive prices for projects from qualified professionals. If necessary, ready-made solutions can be modified to meet the needs of the customer. Proekt-Shop offices are located in Moscow and St. Petersburg, and we also deliver house designs to other regions of the Russian Federation free of charge. Per additional information you can contact the consultants in the online chat or by phone.

Flat roof houses are modern trend in the construction of residential real estate. But, not everyone is attracted to such projects, and many often undeservedly consider these objects poorly suitable for living.

However, modern houses with flat roofs are quite comfortable to live in, functional, made in an attractive style, based on the principles of minimalism.

One-storey house with a flat roof

Traditionally in the CIS countries it is customary to build houses with pitched roofs. But, not so long ago, one-story houses with a flat roof began to gain popularity. Moreover, the construction of such an object is often cheaper than a house with a conventional roof.

In the photo of houses with a flat roof, you can clearly see the various options for such objects. They look really stylish and minimalistic. The popularity of such houses is due, among other things, to the emergence of new building materials.

Previously, flat lids were equipped mainly with mastics and roofing felt. These are not the most durable materials, which entailed serious difficulties in the operation of the house.

Today, more effective materials are used that ensure durability, high waterproofing and thermal insulation characteristics.

Advantages and disadvantages

The pros and cons of a flat roof come from the technology of its installation and the materials used. The main advantages include:

Rational use of the area. The roof area is quite large, it can be used for various purposes, for example, for arranging a summer recreation area.

Savings on materials, especially during construction small houses, since it eliminates the need to build a full-fledged rafter system.

Expansion of living space. There is often a desire to build the 2nd floor. In the case of rafter roof this cannot be done without dismantling it.

If the flat roof was made from suitable materials in compliance with the technology, it is possible to build an additional floor in a short time without extra costs.

Projects of houses with a flat roof for the most part involve the construction of an exploited roof. On the roof, you can equip a gazebo or even a flower bed.

Communication systems can be installed within the walls of the house. This primarily applies to pipes, which has a positive effect on the aesthetic qualities of the building.

But, to obtain these advantages, you need to use modern materials - polymer membranes and various filling compounds. Their service life is about 50 years, and with timely maintenance, much more.

However, there are also disadvantages:

• limited assortment roofing materials... The roof has a slight slope for the drain, however, many traditional materials cannot be used;
• in winter, you will often have to clean the roof from snow, which is especially important for northern regions with heavy rainfall;
• high heat loss due to the large roof area. But, the flaw can be corrected by multi-layer insulation with high-quality materials;
• internal drains need to be additionally insulated, since it can freeze in winter.

Flat roof types

There are catalogs of flat-roofed cottages that contain ready-made designs for such houses. To build a house, you can use a ready-made project, adapting it to your preferences and terrain features.

In such projects, the roof is divided into 2 main types:

• operated;
• not exploited.

The arrangement of these roofs is carried out using different technologies, which must be taken into account at the design stage.

An unused roof is easier to install, but does not allow the roof to be used for one purpose or another. An exploited roof requires significant structural reinforcement, which entails additional costs.

Base for flat roof

When choosing materials for installing ceilings, you need to take into account what the walls are built from. When frame construction floors can only be mounted with light materials, otherwise the structure will not withstand the load.

In modern construction, the following materials are used:

• reinforced concrete slabs;
• pouring cement-sand mortar monolithically over the entire area;
• profiled sheets of great thickness.

An exploited roof can only be equipped with solid reinforced concrete floors. This is necessary in order to be able to withstand high loads from objects located on the roof.

Reinforced concrete and screed - the best option for such a roof. But, regardless of the type of roof, it is necessary to mount a waterproofing and thermal insulation layer.

Roofing materials

A flat roof, similar to a conventional one, is a cake of 3 main layers:

• waterproofing;
• thermal insulation;
• roofing material.

For waterproofing, special membranes made of polymers or bitumen are used. It is better not to use plastic wrap because of its low durability.

The thermal insulation layer must be rigid and resistant to stress. The material must be moisture resistant. For the arrangement of this layer, the following materials are usually used:

• expanded polystyrene;
• foam glass;
• mineral wool sheets with a rigid structure;
• expanded clay filler.

The most effective in terms of thermal insulation properties is foam glass. But, it is at the same time the most expensive material.

However, for the long-term operation of the building, it is worth giving preference to foam glass. Expanded clay is much cheaper, but it has low thermal insulation qualities.

For the installation of the roof itself, it is worth using light and moisture-resistant materials. You can fill the roof with a special solution, lay it with polymer membrane materials, or bitumen coatings.

Photo of houses with a flat roof

Pools and tennis courts, playgrounds and solariums, gardens and promenades, but only on the roof! Houses with an exploited roof have such opportunities: in modern suburban construction, they actively compete with traditional houses and offer additional areas for exploitation.

The portal site presents a selection of the most popular flat roof house projects. Their expressive, laconic architecture and the ability to expand functionality through an open area on the roof will surely resonate with owners of confined areas and adherents of modern European design.

Project of a three-storey house ""

The Vesconti exploitable roof is suitable for the leisure of all generations. Children will gladly organize here play area, the youth will set up a ping-pong table or organize a party, and the older generation will install upholstered furniture for outdoor recreation areas.

Project of a modern two-storey villa with wood trim in a horizontal layout, open terraces and a built-in garage for two cars.

On the ground floor level, the left side of the villa is occupied by a garage with technical rooms, and the right side is occupied by a combined living room and kitchen-dining room. Adjacent to the living room: staircase and distribution halls.

Three bedrooms, each with its own dressing room and bathroom, are located on the second floor. There is also a study here. Each room on the second floor has a corner panoramic window and access to an open terrace.

The villa is designed for permanent residence families of 4-5 people.

Project of a modern villa with brick finish, a cantilevered second floor and a built-in garage.

L-shaped in plan, the villa is designed for a family of 3-5 people and has a simple and convenient layout solution. On the ground floor level, one wing of the house is occupied by a garage for two cars and technical rooms. The other has a combined kitchen-dining room and living room with access to the terrace.

On the second floor there is a study and three bedrooms, each with its own dressing room and bathroom. The parent's bedroom with an obliquely cut loggia cantilever "hangs" over the living room. There is an outdoor terrace with a solarium and barbecue area on the roof of the garage.

Norden refers to eco-urbanism, is distinguished by minimalism in decor, functionality and efficiency of planning solutions. The project is being sold together with a design project for all premises, including layout options for the exploited roof, which occupies more than 160 sq.m. and is divided into three independent functional areas.

The project is very spacious and ideal for a large family6 there are not only 4 isolated bedrooms for the owners of the house, but also 2 rooms for staff. All technical rooms are designed here - a boiler room and a garage for 2 cars. A spacious terrace on the first floor and a balcony with a garden on the second will allow you to save directly on the area of \u200b\u200bthe acquired land plot, by organizing quality outdoor recreation within the boundaries of the cottage itself.

Two-storey house project " »

Project of a two-storey villa with corner panoramic windows, finishing natural stone and a built-in garage for two cars. The villa is designed for permanent residence of a family of 4-5 people.

On the ground floor level, the house is divided into two parts. The right one is occupied by a garage and technical rooms, the left one is a cross-shaped combined space of a hall with an internal front staircase, a living room, a fireplace room and a kitchen-dining room. The dining room has its own exit to the garden.

On the second floor level there are four bedrooms united by a spacious hall, each with access to its own balcony. The bedrooms are interconnected with separate dressing rooms and bathrooms with natural light.

The project of a two-storey house with solid glazing, open terraces and an attached garage for two cars for a family of 4-5 people.

A one-story garage with an exploited roof is attached to the main two-story volume of this house.

The presentation group of rooms is located on the ground floor and opens onto a terrace that runs along the main volume of the building. This is a spacious hall with an internal main staircase, a living room with a double-sided fireplace and a kitchen-dining room. On the ground floor there is a guest room or a maid's room with a separate entrance.

Three bedrooms and a study, located on the second floor, are united by a well-lit hall and have access to balconies and a terrace on the roof of the garage. The children's bedrooms are interconnected with separate bathrooms, the parent's - with a dressing room and a bathroom with natural light.

One-storey house project with wood trim and beveled concrete wallsenclosing the terrace at the group of bedrooms. The house is designed for construction on the terrain, has an outdoor pool and is designed for a family of 3-5 people.

The planning solution of this house assumes division into two parts - presentation and private. The presentation is a spacious living room with a fireplace area and a kitchen-dining room. The kitchen has a working "island" and an adjacent grocery pantry. The presentation part of the house opens onto a terrace with a swimming pool and an outdoor solarium.

The private part consists of two children's and parent's bedrooms, each with access to the terrace. At the same time, the parent's bedroom has two opposite exits - to the side terrace, fenced with concrete walls, and to the main one, with a pool.

Project of a three-storey house ""

The minimalism of "Alicante" will appeal to many buyers. Simple, but at the same time harmonious, this project will fit into the site even with modest dimensions. And the ergonomics of the interior makes the house functional and comfortable for a family of 5-6 people.

Project of a modern two-story house with a built-in garage, decorative shutters on the facade and colored outdoor lighting.

The breading solution of the house assumes the permanent residence of a family of 5-7 people. On the ground floor level, there is a spacious living room with a corner fireplace and access to the terrace. Next to it is an open kitchen-dining room with a work island, a dining table and a large grocery pantry. On the ground floor level, there is a bedroom for senior family members, which can also be used as a guest room.

Three nurseries - each with its own mini-cabinet, but with a common dressing room and bathroom, are located on the second floor. The parent's bedroom is also located here, designed as a single block with a bathroom and a dressing room and has an exit to the balcony.