Why is the ceiling in a bathroom made of panels so good and how to install it yourself: a special case for an apartment. Aluminum bathroom ceilings - a beautiful and practical solution How to install an aluminum bathroom ceiling

The suspended structure in the bathroom performs a whole range of technical functions: it masks the defects of the ceiling surface, serves as an excellent frame for built-in lighting, and allows you to create a unique project in the style you like.

Professionals can easily cope with both drywall and tension structures, and amateurs are better off starting with more simple option: Install a slatted ceiling in the bathroom yourself - quickly and cost-effectively.

The prototype of modern plastic and aluminum panels is the usual wooden lining, which is still used for wall and ceiling cladding.

Narrow long slats of various lengths are easy to install, so they are often used for finishing summer cottages, utility rooms, basements, attics.

With the appearance on the market of lighter and decorative panels from plastic, the choice of decoration has expanded suspended structures - the most suitable for renovation of bathrooms, toilets and kitchens.

Thanks to the versatility of plastic, slatted ceilings have become a godsend for decorating the ceiling in the bathroom. Their advantages are undeniable: inexpensive cost, quick installation, diverse design, prompt repair.

According to the material of manufacture, all the popular panels that our supermarkets offer are divided into plastic and aluminum. PVC slats have a standard length of 2.5 m - 3 m - 4 m (there are also 6-meter parts, but they are not required for typical bathrooms), but differ in width.

Panels 25-30 cm wide after installation look like a continuous covering, since they do not have pronounced borders or inserts. We will dwell in more detail on the elements that outwardly resemble narrow slats, that is, they have a width of 85 mm, 100 mm and 150 mm.

Aluminum slats are splash-proof and resistant to temperature extremes, and their varied designs - from traditional white spraying to vibrant gilding - allow for fantastic designs

Reiki differ not only in size, but also in shape. Among the builders there are "their" divisions into categories.

For example, elements with right angles and a clear configuration are usually called German, with rounded edges - Italian, and unusual ones, characterized by a complex shape and additional installation difficulties - design ones.

Here are some types of decorative plastic panels:

Elements with soft, rounded corners, the length of the main parts and inserts - 3 m or 4 m, options with perforation are possible (hole diameter - 1.5 mm)

V-shaped decorative elements that play the role of inserts between the main, background details. Possible colors: white, gold, silver matt or glossy, chrome

Decorative cube-shaped inserts that fill gaps in the open ceiling. The color of the inserts (gold, silver, chrome, white) is selected in contrast to the main background

When choosing certain details, you need to focus on the wall cladding, furniture color, lighting features and make sure that the design of the slats does not contradict the chosen style.

Do-it-yourself rack ceiling: detailed photo instructions for installation

Consider how to quickly install a slatted ceiling in a bathroom using a minimum of inexpensive parts. This instruction is useful for novice craftsmen to familiarize themselves with the details of suspended structures.

The installation procedure is the same regardless of the use of aluminum, steel or plastic parts.

The choice of time for installation of the structure

Do not forget that the construction of a suspended ceiling is just one of the stages of bathroom repair, therefore, it is necessary to determine in advance its place among other works.

Most often, construction activities move from the bottom up, that is, first I lay the floor, then the walls are lined, and finally a suspended structure is erected. This is the most correct and logical order.

The installation of traverses and the assembly of slats is a quick and "clean" process in comparison, for example, with finishing the walls with porcelain stoneware. There is practically no dirt and debris, and the most difficult event is the exact installation of the perimeter and the installation of suspensions.

Do not forget that in parallel with the installation of the suspension elements, it is necessary to carry out installation work lighting fixtures - spotlights, chandeliers or hidden lighting

Finishing ceiling work allows you to adjust the height of the walls, to mask flaws in their decoration. For example, a small gap between the tile and the ceiling can be easily covered with a suspended structure.

And here it will not be superfluous to recall another advantage of the rack ceiling: it can always be done without preliminary preparation, simply by installing the profile and "typing" required amount panels.

Simply put, it is a budget option a ceiling that can be erected or disassembled at any stage of the construction process.

We will provide instructions for the construction of a slatted ceiling white... If desired, you can decorate it with colored inserts, install spotlights or use slats of a different size

Preparatory stage - materials and tools

First of all, you will need tools for marking, since correctly measured distances and intervals are a guarantee of a beautiful result. So, you need:

marker;
square;
roulette;
construction cord (optional);
level (better laser).

With the help of these simple devices, you can carry out all the preliminary work. The first step will be the installation of a guide profile, which will run along the perimeter of the entire room, so it is important to calculate the height of the future structure.

The topmost ceramic tile, and its edge is a kind of landmark.

A laser level is essential at any stage renovation works in the bathroom, especially when marking. With its help, tiles, facing panels are laid, suspended structures of various types are mounted

If there are plastic panels or a layer of plaster on the walls, then you will have to count from the floor. Why not from the ceiling?

The fact is that in some houses the ceiling tiles are uneven, and if you are guided by them, you can make a structure with an inclination - this defect will immediately catch your eye.

In addition to marking tools, you will need scissors (or a construction knife), a drill (puncher), a screwdriver, a screwdriver. Plastic is easy to cut with ordinary construction knife.

But if you choose aluminum panels, you will have to get special metal scissors. As you can see, there are few tools.

The metal shears can be useful for cutting aluminum panels, steel rails and other metal parts, including decorative corners and inserts

List of required materials:

ceiling panels - slats made of plastic or aluminum with a width of 85 to 150 mm;
guide metal profile;
traverses (support rails for fastening rails) and suspensions for them;
decorative plinth;
fasteners (dowels, screws).

If the width of the bathroom is only one and a half meters, then it makes sense to purchase 3-meter parts, divide them in half and choose a "transverse" design.

For a large room, accordingly, we buy 4, less often 6-meter panels. If you want to decorate the ceiling with decorative inserts, consider their width when purchasing the main parts

The calculation of the bearing profile is as follows: if the length of the bathroom does not exceed 2.5 m, then 2 rows are enough, that is, a maximum of 5 m.Knowing the number and length of tires, we calculate purely suspensions - with a light ceiling, 2-3 suspensions for each bus.

When buying a kit of parts, take care of spare parts that may come in handy for the next repair.

Installation of guides around the perimeter

Suppose we measured the height of the stream and marked the line along which the guides of all four sides will pass. The distance to the ceiling is from 10 to 20 cm.

It is impossible below, since the room will look cramped, above is also not recommended to leave room for technical maneuvers - the device of the lighting system. Before installation, we check the accuracy of measurements with a level.

We cut the supporting profile into segments equal to the length of the sides using metal scissors.

We apply each segment with the wide side to the marked line, drill holes right through the metal, fix it with screws and dowels. The distance between the holes is about 40 cm

If we put the profile on top of the tile, make sure that the marks do not fall on the junction of two tiles. In this case, it is better to use a drill and a special drill for ceramic rather than a hammer drill for drilling.

We place the guides alternately on all walls, inserting one profile into another at the corner joints. When installing each new segment, we use a laser level - any skew will be noticeable after general installation

The result should be an even frame that encircles the entire room. It will serve as a support for the installation of slats and perform a decorative function.

Installation of hangers and traverses

We fix the suspensions (metal perforated plates on which the tires will be mounted) on the stream, drilling recesses for the dowels in its surface.

We hammer the dowels into specially designed holes with a hammer, then insert 2 screws each and tighten them with a screwdriver or screwdriver.

When the suspensions are firmly fixed, bend both ends down at each of them. Between the ends there will be traverses - support tires, the basis for installing panels

We take the tires, bring them to the suspensions and securely fasten them with screws at the required height. We bend the remaining free ends of the suspensions up so that they do not interfere with the fastening of the rails.

When correct installation the ends of the traverses should almost touch the opposite walls and be above the supporting profile. Check the position of each fixed part with a level

It so happens that the bus is not enough for the entire length of the room. In this case, it must be increased. At the end of the installed traverse, we mount another suspension, bring in the missing piece end-to-end and fix the structure.

At this, the rough work is completed, it remains to assemble the ceiling, laying out the slats according to the planned project (along, across, diagonally, combined).

Assembling the ceiling

We take out the slats from the packages, remove the protective film. Until this moment, it is not recommended to unpack plastic or aluminum panels, so as not to accidentally damage the edges or the upper decorative layer.

We cut segments along the length or width of the room.

We take the slats one by one and, one after the other, insert the ends into the guide wall profile, and snap the central part onto the traverse (on which special teeth are intended for this)

The last rail does not always fit in width, sometimes it needs to be cut. We snap in the last detail - the ceiling is ready.

In our case, the ceiling is of a closed type, that is, the panels fit tightly to each other, forming a solid coating, without gaps. If the plans are to complicate the installation with decorative elements, then there should be gaps between the slats - along the width of the inserts. We install decorative inserts together with the main ones, alternating them

It remains to complete the installation of the lighting system.

Installation of lamps

We are not interested in the installation of the chandelier, since it does not fit well with the slatted ceiling. The most simple and the best option is a set of spotlights. Their location can be any:

around the perimeter of the room;
along long walls;
diagonally;
over work areas;
staggered, etc.

In fact, the lion's share of the system is prepared in advance. Even before attaching the rails, it is necessary to lay the wiring, bring it to the fixing points of the fixtures, and cut holes in the panels to size.

In this case, after installing the ceiling, it remains to fix the lamps and screw in the lamps.

Best suited for baths lED bulbsthat do not heat ceiling surface, save energy and give light that is close to natural light

The appearance of the luminaire can be anything, but it must match the color of the panels and match the style of the room.

Most Popular Models - Products round shape silver or gold, but there are hundreds original lampsdecorated with rhinestones, Czech glass, colored shades or pendants.

Secrets of the design of slatted ceilings

Having thought of building a slatted ceiling in the bathroom or toilet with your own hands, think over its design before starting work. You can achieve an incredible effect, given the texture or location of the slats.

The simplest option that can be called universal is white panels without inserts and patterns, with built-in lamps. It is suitable for the bathroom in classic style or in any modern design.

The main advantage of white glossy and matte slats is their excellent combination with the entire range of colors and textures. All shades of white are in harmony with both pastel wall cladding and dark tiles

The black ceiling with narrow inserts of the same color looks presentable, especially against the background of chrome accessories and shiny sanitary ware.

Be careful with black shades. Do not forget that dark tones narrow the space, and the black ceiling, accordingly, visually reduces the height of the walls. For the opposite effect, use reflective gloss or mirror inserts

Slatted ceiling with silver or gold accents is popular. It has two advantages: increases the decorative possibilities of panels of any color and fits well into an environment filled with chrome details

Try not to mix gold and silver in the bathroom interior or use them in large quantities: colors lose their attractiveness, become too catchy, and attract all the attention. Light silver or gold decor, on the other hand, looks elegant and appropriate

If you are proficient in installing suspended structures, you can experiment and create a complex combined structure, playing with the texture and arrangement of slats of different colors.

One of the design rules is moderation in the use of bright colors or shiny details. If the ceiling in the bathroom is too expressive, try to minimize wall decoration.

Finally - one of the options for installing a combined suspension structure.

Installing a slatted ceiling in a bathroom, kitchen or other room with high humidity is a very sensible solution, since in such conditions no other finish will be as durable.

In addition, the pendant structure will have a perfectly flat surface and will allow you to place stylish recessed lights.

We invite the reader to familiarize himself with the technology of installing a slatted ceiling in a bathroom, which, as he can be sure, is not difficult even for a beginner.

First of all, you need to decide what the ceiling will be.

Aluminum slats are available in a fairly diverse design:

Colour. A wide range is available - from the usual matte white to gold.
The form.
The size.
The presence of perforation. Provides ventilation of the space between the slats and the floor slab.

Three types of rails are distinguished in shape:

classical rectangular shape without rounding (they are called "German");
with rounded corners (Italian "");
with a special shape ("designer"): usually a little more difficult to install.

The length of the slats (standard row - 2.5, 3, 4 and 6 m) must be chosen taking into account the size of the bathroom, so that the scraps remain as small as possible.

Aluminum rack dropped ceilings

By width, the panels are divided into:

wide (25 - 30 cm): they have no visually demarcating elements, so the surface of the ceiling looks solid;
narrow (85, 100, 150 mm): they have clearly defined edges, due to which the boundaries of each rail are clearly visible after installation.

In addition, various inserts can be installed between the narrow slats, which make the design of the structure more effective.

If aluminum slats seem too expensive, more affordable steel or PVC panels can be purchased.

What do you need to install?

In addition to the rails, the master will need some more elements, as well as tools. But first you need to answer the question: when exactly to start installation?

The choice of time for installation of the structure

A positive feature of the slatted ceiling is that its installation does not apply to either "wet" processes or dirty in general. Consequently, you can deal with its device at the very end of the repair epic.

This tactic is quite consistent with the generally accepted order of internal finishing works: usually start from the floor and work from bottom to top, ending with a ceiling.

Required materials and tools

In addition to the panels, you will need to purchase:

guides (metal strips with a special profile);
traverses (elements to which the rails will be attached);
hangers for traverse (in the amount of 2 - 3 for each traverse);
dowels and screws.

The total length of the traverse is determined based on the fact that they will be installed in increments of 1 - 1.2 m.

All materials, as always, should be purchased with a certain margin: it will be needed if some elements are accidentally damaged during installation, as well as in case of replacing damaged elements in the future.

You also need to take care of the availability of such tools:

level: it is better to take not a bubble, but a water one (two glass tubes connected by a long rubber one);
marking tool: marker, cord;
puncher;
screwdriver or screwdriver;
construction knife (if PVC panels are used);
scissors for metal;
roulette.

By the beginning of installation in the under-ceiling space, wires must be routed to power the lamps. They must be laid in pipes or corrugated sleeves made of metal or self-extinguishing plastic (PUE requirement).

Installation of guides around the perimeter

Work begins with attaching guides to the walls, which at the same time will serve as a decorative frame for the ceiling sheet. All of them should be located:

strictly horizontal;
at a distance of about 10 cm from the floor slab.

The second point is of a recommendation nature: 10 cm is the optimal value, which will not greatly reduce the height of the room and at the same time will allow you to easily place all the electrics and lamps.

If necessary, it can be adjusted in any direction.

How to achieve a strictly horizontal position of the guides? It makes no sense to postpone equal distances from the main ceiling - there is no guarantee that the slab itself lies strictly in a horizontal plane. You can "dance" off the floor, as it is always leveled.

But the most reliable way is to make marks with a water level. The use of this tool eliminates any inaccuracy that would occur when postponing distances with a tape measure or using laser level bubble type.

We connect the marks made with straight lines broken off with a stretched cord, after which we fasten the guides along them with dowels (wide side). The installation step of the fasteners is 40 cm.

Rack ceiling installation diagram

If the rails are mounted on top of the tile cladding, it is highly advisable to avoid the mounting holes getting into the seams between the tiles. If you still had to face this, the hole must be drilled special drill for ceramics and without perforation mode.

If you need to cut the metal strip, you can do this with metal scissors.

In the corners, the guides are inserted into one another.

Among suspended ceiling systems, they are chosen due to the relative ease of installation and the aesthetic appearance of the structure.

You can read about how to properly whitewash the ceiling in the bathroom.

Drywall is a material from which you can create an interesting decorative ceiling in the bathroom. You can read about the features of plasterboard ceilings.

Installation of hangers and traverses

This stage of installation of an aluminum ceiling is carried out in the following order:

On the floor slab, we beat off straight lines perpendicular to the direction of the slats in the future suspended ceiling. The distance between the lines is 1 - 1.2 m, at the same distance the first and last of them must be spaced from the nearest walls. This is a markup for installing traverses.
Along each line we evenly install 2 - 3 suspensions, screwing them to the floor slab with two dowels. Having fixed the suspension, both of its "legs" must be bent down.
Between the upper edges of the guides facing each other, previously bolted to the walls, we stretch a cord or thread to indicate a horizontal plane.
We install the traverses, placing them between the "legs" of the suspensions at the required height and screwing them to them with self-tapping screws. The traverses should lie along the plane indicated by the stretched threads. Thus, they will be above the guides installed along the perimeter of the room. In length, each traverse should be almost from wall to wall (leave small gaps). It can be made up of several short strips, fixing each of them on their own suspensions and fastening together.

We bend the ends of the "legs" of the suspensions below the traverse upward (they would interfere with the installation of the rails).

Assembling the ceiling

So, let's look at how to assemble and mount a rack ceiling. The sequence of actions is as follows:

The protective film is removed from the rails. This should be done at the last moment in order to exclude damage due to careless actions of the edges or decorative coating.
A fragment of the required length is cut off with a construction knife (PVC slats) or with metal scissors (aluminum).
If a lamp is to be installed in this panel, a round hole must be cut in it: a circle is drawn, several small holes are drilled along it. The gaps between the holes are cut, after which the edge of the resulting round hole is ground.
The prepared rail is inserted by both ends into the guide profiles on opposite walls, and in the middle part it snaps onto the traverses (they are equipped with special teeth).

Visual scheme of a rack ceiling

Other strips and inserts are installed in the same way, if they are provided, only the last strip will need to be cut to the required width.

Installation of lamps

The luminaires are fixed in the holes made under them, after which the lamps are screwed into them.

You can arrange light sources in different ways:

along the walls along the entire perimeter;
along only long walls;
over the entire surface of the ceiling in a checkerboard pattern;
asymmetric with concentration above work areas.

When using PVC panels, the lamps should not emit too much heat.

Ceilings made of plastic panels have excellent moisture resistance, therefore they are widely used in bathroom decoration. , read on our website.

You will find tips for installing a false ceiling in the bathroom.

In a humid room, for safety reasons, it is recommended to install a low voltage lighting system that requires a voltage of 12 or 24 V. It is also more economical. Some halogen lamps, as well as new generation lamps - LEDs, are designed for such a power supply. The latter are distinguished by their particularly low power consumption and significant resource.

Video on the topic

The phrase "Rack ceiling" entered our life relatively recently. But, if today you ask which ceiling to choose for the bathroom, the aluminum ceiling will advise the overwhelming number of professionals who really understand in construction.

Let's see what exactly attracts specialists in aluminum rack systems, and for this we will take a closer look at its wooden and plastic counterparts.

A wooden slatted ceiling, and in the common people just lining, is the first of this type of ceiling system, using as the main finishing material special profiled wooden slats.
In general, the forcing is excellent environmentally friendly. A product that is widely used in modern construction, but it is irrational to use it in bathrooms.

Benefits

The advantages of a tree should always include its environmental friendliness, as well as the original, natural texture and rigidity of the resulting structure. Unfortunately, this is where the benefits end. Disadvantages begin.

disadvantages

The first and main disadvantage of using wood in bathrooms is rotting. Where there is high humidity, the tree rots, and there is no getting away from it. It is possible, however, to use impregnation slowing down the destruction process, but then the main advantage of natural material disappears - its environmental friendliness.

The second, just as important drawback of the lining is the very process of manufacturing from the last finished ceiling product. Installation, grinding, staining and varnishing. Each of these technological processes requires from the performer known work experience and skill. This means that the manufacturing price will be significant.

In addition to all of the above, the tree in the bathroom requires complex and expensive care, since its structure is easily contaminated and is susceptible to fungal attack. In this regard, the aluminum suspended ceiling for the bathroom significantly outperforms its wooden counterpart. To care for it, you can do with just a napkin.

Plastic slatted ceilings also have a long history and are known as PVC panels or simply "plastic".

Benefits

Unlike wood, such a ceiling is not subject to decay, is easier to maintain and does not require any finishing touches. And besides, it is significantly inferior to natural material in price.

disadvantages

But with the environmental safety of PVC, everything is not so simple. After all, this is an artificial material and the cadmium, chromium, lead and formaldehyde contained in it are recognized enemies of human health.

It has plastic and a purely operational drawback - it is very easily damaged. It is enough to lightly hit such a ceiling with any angular object, as a gap is formed in the PVC panel, which cannot be “darned”

Aluminum slatted ceilings

The aluminum ceiling for the bathroom combines all the advantages of both wood and plastic materials... From the tree, he took the environmental friendliness and strength of the resulting product. From PVC - non-susceptibility to decay, ease of maintenance and lack of finishing.

But, in addition, it is possible to highlight some of the advantages that are inherent only in aluminum rack systems, and the main one is ease of installation. You can assemble such a vault even without special training. The installation principle is intuitive and does not require any special skills from the contractor.

The only drawback of aluminum ceilings is their price on the market; it ranges from 1,000 to 1,700 rubles per square meter.

Feature

Despite the resistance of aluminum itself to moisture falling on it, the coating of the slats does not always have such high-quality stability characteristics. That is why, in the bathrooms, it is nevertheless necessary to thoroughly think over and design the ventilation system of the room even before the installation of the very substructure of the aluminum rack ceiling of the bathroom.

Colors and textures

When choosing an aluminum ceiling for a bathroom, one cannot but pay attention to the richness of the choice of textures and colors of similar goods provided on the construction market.

The most widespread textures are mat and gloss. Mirror and metallic that are coming into fashion are trying to compete with them.

TIP
When choosing a texture, one should take into account the size and geometry of the bathroom, as well as the general design of the room. So mirrored ceiling has every chance to expand the boundaries of the room, but only spruce will not reflect the black and sullen walls.

As for the colors, in addition to the traditional tones and shades that cover the entire range of the visible spectrum, there are ready-made textures such as: "Mirage", "Safari", "Northern Lights", "Karelian birch" and many, many others. Designers. those working for the largest manufacturers of aluminum ceilings do not sit idle, and therefore more and more interesting textures come out every season.

Why is there aluminum in the bathtub?

As a result, to all of the above, I would like to say that aluminum slatted ceilings are simply created specifically for toilets and bathrooms. Good hydro and wear resistance, excellent aesthetic appearance, ease of use, good biostability. It is these qualities, like no others, that are important when arranging rooms with high humidity.

And if you remember that bathrooms have never been famous for their huge area, then the significant cost of the lath products used in them will not play a decisive role.

If you are still in doubt whether you need an aluminum ceiling in the bathroom, look carefully at the photos of rotted and smothered ceiling paintings made of other lath materials.

Fully meets these requirements aluminum - easy to install and easy to use. Do not think that this is a material used mainly in the design of industrial premises. The next collection of photos of aluminum ceilings in the bathroom interior will show that such a coating can look beautiful, stylish and modern.

Features of aluminum ceilings

There is a wide variety of aluminum ceilings appearance and the type of installation. Let's take a closer look:

Cassette ceiling - these are square or rectangular panels of various colors and textures. They are mounted on an open or hidden profile frame system. You can read more about the installation of such structures here.
Rack aluminum ceilings- longitudinal flat beams, which are installed on a special frame.
Cuboid panels - a kind of rack and pinion, which differ in volumetric structure.
Free-form design panels, depending on the room configuration and your preferences. Developed according to an individual project.

All types of aluminum coating have common advantages, which determine their popularity:

The main property that matters for the bathroom is moisture resistance. Aluminum ceilings do not deteriorate or rust under the influence of drops of water and steam.
Durability. When properly installed, the aluminum structure will last you decades - or until you want to make repairs.
Easy to care for:it is enough to periodically wipe the ceiling with a damp cloth. Do not know how to wash them in case of heavy contamination? It's simple, with any non-abrasive detergent.
A variety of shapes and colors, which allow you to choose the coating for the type of interior (we will consider in more detail a little below);
Aluminum is a lightweight material, therefore you don't need a complex frame;
Ecological cleanliness and absence of harmful impurities;
Complete incombustibility;
The suspended structure will hide the rough ceiling, wires, ventilation.
Affordable price - they are much cheaper than stretch and plasterboard ceilings;
Easy assembly and disassembly,which you can do yourself.

The disadvantages include a slight decrease in the height of the walls (a common disadvantage of all suspended structures). In addition, if one section is damaged, only it will not work to replace it - you will have to partially dismantle the entire coating. However, these inconveniences are compensated for by a large number of advantages.

As you can see the use of aluminum panel ceilings in the bathroom is justified not only from an aesthetic point of view, but also from a functional one.

Aluminum ceilings in the interior

The assortment of modern hardware stores allows you to choose an aluminum suspended ceiling for a bathroom of any color and texture, including even mirror structures.

If you have a bad idea of \u200b\u200bhow such a coating looks in the interior, we suggest looking at our extensive photo selection.

IN last years are popular bunk aluminum slatted ceilings. True, it must be taken into account that they require an appropriate wall height - at least 2.5 meters. Otherwise, the bathroom will seem too low and cramped.

They are mounted on a frame similar to that used for plasterboard structures. Such a ceiling is well suited for spacious bathrooms where zoning is necessary - you can select a utility area with washing machine, shower or bath.

Looks good for this design combination of two colors - separate for each level. One of fashionable combinations a combination of gold and silver plating is considered - an elegant, but not too flashy option.

By the way, modern aluminum ceilings are not always designed as metal. You can choose any color sprayed slats - for example, beige, as in our example. Thus, the aluminum coating can fit into any interior, even a classic one.

Another popular design method is combination of slats of two textures.For example, painted matte and shiny metallic. The main thing here is to make sure that the color matches the overall style of the room.

If the room is decorated in bright colors, the use of mirrored aluminum ceiling. It will reflect the decoration of the walls and floor, making the bathroom noticeably higher. A good solution for small spaces with low walls. True, in this case, you will have to carefully monitor the order - any flaw will be much more noticeable.

An unusual but stylish trick - several perpendicular beams from painted slats.They will brighten the ceiling, add color and help decorate the room. Choose colors carefully - if they do not harmonize with the main design, the ceiling may seem too colorful and flashy.

If in a private house you decide to place a bathroom in the attic, you will like the option sloping wavy ceiling.It looks very impressive and beautiful, does not differ in particular complexity of installation.

True, you need to take into account the height of the walls - this design requires more space than a standard flat one. However, the result is justified - such a ceiling is striking and can be considered a self-sufficient decoration that does not require additional decor.

If you order wavy slats with blue coating, the ceiling will look like a seething sea - beautiful and unusual, isn't it? And such a solution fits perfectly into the theme of the bathroom.

Another design option is combination of dark and light slats. Good way zone the space for a low room, without hiding the height.

An interesting trick:You can achieve color diversity not only by spraying or painting. Hidden illumination with LED strips will make the ceiling more voluminous. Try to choose the tone of the LEDs that matches the color of the walls or plumbing. So you get an unusual room with a holistic interior.

Cassette ceilings are no less diverse than rack ceilings. In addition, they are faster to assemble and easier to operate: for example, you do not need to dismantle the entire coating to get to hidden communications or replace a couple of elements.

Aluminum ceiling with unusual lighting that simulates the starry sky - non-standard solution... More often, a stretch canvas is used for such installations, however modern technologies allowed to bypass this limitation. You will need led strip and tiny spotlights that mount directly into the cassette.

Undoubtedly, such lighting requires certain expenditures of labor, time and money - such a ceiling is much more expensive than simple analogues. However, the result will exceed all your expectations.

Fancy perforated cassettes suitable for a spacious room. True, in this case you will have to take care of the cleanliness of the frame and floors - it is not too beautiful if you can see clouds of dust or cracks in the rough finish through the holes.

Mirrored aluminum ceiling - quite a bold decision. Not everyone will agree to a huge mirror for the entire overlap area. However, the result is worth it - beautiful, original. In addition, such a coating visually enhances the bathroom, and it is easy to care for it - wash the panels with a standard glass cleaner and a soft, lint-free sponge.

Combining a black and white cassette ceiling with gold-colored accents is a classic trick that's perfect for a bathroom. Such cassettes are easy enough to mount and look impressive, but they require an appropriate interior - it is better to consult a designer.

Can be ordered patterned ceiling cassettes - painted or embossed. Such ceilings look very elegant. They will decorate a bathtub designed in any style - from modern high-tech to discreet classics. The main thing is to choose the right drawing.

For the price, they will not cost much more than ordinary high-quality cassettes.

Don't like the monochromatic design? Now you can easily purchase a cassette aluminum ceiling in any color. For example, it looks stylish in the interior combination of black and red plates. It is better to make them matte - this way water streaks will be less noticeable, so cleaning will be needed less often.

Look good and rectangular cassettes, especially for a narrow bath. Placed perpendicular to a long wall, they visually expand the room. Want to add heights too? Choose a mirror finish - it can "raise" the ceiling and the room will look much more spacious.

Unusual solution - white cassettes with red diamonds in the corners.True, during the installation, you will have to be careful so that all the figures come together clearly. Also, make sure that there are no wide seams - otherwise the pattern will be disturbed.

However the result is worth it - original designthat will enliven the bathroom interior.

As you can see, there is a wide variety of aluminum ceilings and will suit almost any bathroom style. We hope that some of our ideas will find practical use in your house.

Slatted ceilings for a bathroom - the installation of such a structure is not the easiest process.

But if you get serious about the matter and act according to the instructions, then it is quite possible to do this.

Much in this regard depends on the size and shape of your room. Naturally, the simpler the shape, the easier it is. In ideally rectangular or square rooms, questions about installing a slatted ceiling should not arise.

If you feel that you are not able to cope with this task, call a team of specialists, since there are quite a lot of them at the moment.

But we suggest that you try to install a rack ceiling in the bathroom with your own hands, because this will significantly save your money.

Where to start installation?

It is worth starting, of course, with measurements.

If in doubt about the quality of an independent measurement, you can always call a measurer. The cost of his services is around 500 rubles.

Of course, it's worth it, because in the end we need a normal slatted ceiling in the bathroom.

Instructions like this, oh correct installation there are a lot of slatted ceilings, but most of them are just a vague description from which nothing can be extracted.

In this article, we want to dwell on certain points in more detail and explain certain subtleties when installing a rack ceiling.

If you are going to repaint the ceiling in the bathroom, then it is enough to apply one layer of enamel.

Advice! If you want to make the ceiling "mirrored", then choose a chrome aluminum ceiling for the bathroom.

Important! Any ceiling must be sold in a protective film. Do not trust manufacturers whose ceilings are sold without this very film.

Have you decided to buy a rack ceiling and want to calculate the cost?

Remember: the price of the ceiling includes: tire, suspension, plinth, and of course the slats themselves.

A splint is a bar with teeth. It is for them that the reiki cling. Carefully match tires to racks - certain tires will not fit all rails. Now, let's figure out what a suspension is.
A hanger is a wire attached to concrete ceiling... Tires with rails are attached to this suspension. As a matter of fact, because of this, such a ceiling is sometimes called suspended. High quality suspensions are adjustable in height.
The last part is the baseboard. The skirting board plays a purely decorative role. It closes the gap between the wall and ceiling, in general, plays the same role as a conventional skirting board.
Don't forget about the fixtures, if any. There are situations when people remember about lighting fixtures only after installing a rack ceiling.

Bathroom slatted ceilings have a large price range, so keep looking and experimenting.

Ceiling installation

If you decide to do it yourself, then be sure of 100 percent success.

Do-it-yourself slatted ceiling in the bathroom begins with the markings mentioned above. Then you need to fix all the wires, otherwise they will interfere with your further work.

And now we provide you with step-by-step instructions.

Remember that any installation of a slatted ceiling in a bathroom begins with the attachment of support profiles (stringers). They are fixed with screws and dowels.
We install end profiles around the perimeter of the room. This is very easy to do, since they do not require fixing directly to the wall itself.
Now is the most thrilling moment. Remove the protective film from the rails. If you wanted ceiling lamps, then cut the holes of the required size in advance.
We hang the rail on the stringers. That's all! Our Bathroom Rack Ceiling is ready!

Many are afraid not of the installation process, but of the repair process, if necessary.

First of all, even during installation, try not to deform the slats, since they are quite easy to deform.

If a dent or scratch appears afterwards, then it is enough to change one panel, leaving the ceiling unharmed.

The ceiling in the bathroom is a slatted ceiling - this is a wonderful and strong ceiling, in every sense of the word, it can be put in almost any room.Modern manufacturers are increasingly focusing on models intended primarily for decoration.

The ceiling has deservedly received deserved attention, due to its versatility, easy installation, and most importantly - strength and excellent protective qualities, such as the absence of ignition and protection from rust, since aluminum does not rust. Accordingly, in addition to baths, it can be used in places where fire safety above all.

And finally, think about whether you can afford to lose a few centimeters due to such a ceiling? Perhaps you are not so high without it, but the rack ceiling is minus 5-10 centimeters. But at the same time, their benefits remain so great that some are not stopped by the height restriction.

Bottom line: slatted suspended ceilings for a bathroom certainly have many advantages, so it's worth considering purchasing this beautiful and reliable ceiling.