Do-it-yourself children's swing step by step instructions. Do-it-yourself children's swing for giving: photos, diagrams, useful tips. Photo gallery: spring designs for kids

Today there are a huge number of accessories designed for the garden. One of them is a garden swing, which will not only become an attractive element landscape design, but also a very useful design. Both children and adults love to swing on a swing, because this activity calms, cheers up and has a positive effect on human health.

What swing is better for giving?

For the construction of a swing, only 3 types of materials are used - wood, metal and plastic. Each person decides for himself which one to use in the production of a swing for his own garden. To do this, it is necessary to study the advantages and disadvantages of different models.

The main features of a swing made of wood:

• practicality and versatility . Wood is a material from which you can build not only the usual single swing, but also cozy sofas with several seats;
• ecological cleanliness . The tree has a natural origin, so the material is absolutely safe for human health;
• harmony with the landscape . Wooden swings fit perfectly into any garden design. This advantage favorably distinguishes structures from metal analogues, which require appropriate design of the entire site;
• safety . Wood is considered a fairly soft material, which greatly reduces the number of injuries. This is especially important if children will swing on the swing;
• ease of installation . A do-it-yourself wooden swing can be made by absolutely anyone who is at least a little familiar with construction work;
• economy . The cash costs will not be large, since the material itself is inexpensive.

Metal swing characteristics:

• durability - this is perhaps the main advantage of such products. Metal is an eternal material that will not rot or break;
• reliability such a swing is undeniable. The material is characterized by hardness and resistance;
• practicality . The metal is not afraid of the impact of negative environmental factors, it is not afraid of rain, blizzards, or ultraviolet;
• low cash costs . When compared with high quality wood, the metal will be cheaper;
• variety of models . Swings made of metal can be collapsible, welded or forged. Each consumer can always choose suitable option specifically for your site;
• metal swing able to decorate original view any plot or garden , however, the designs require an appropriate stylistic design, otherwise they will not look very harmonious;
• metal garden swing you can do it yourself , but this will require the appropriate skills and abilities.

Metal swings have many positive characteristics, but they also have some disadvantages. For example, the dense structure and hardness of the material is good, but only on the one hand, on the other hand, the possibility of receiving various blows and injuries increases significantly. In order to prevent the metal from rusting, it is necessary to periodically cover it with a layer of special paint. In addition, many people believe that metal swings are inferior to wooden ones in terms of their aesthetic features.

Pros and cons of plastic swings

As for the plastic swing, experts find in them more minuses than pluses. Such children's swings for giving are distinguished by their low cost and variety. colors. Among the disadvantages are:

• plastic constructions do everything design decoration garden plot cheaper;
• such swings are suitable only for kids, but teenagers and adults will not be able to use them;
• harmful fumes - this is perhaps the most significant minus of the material. In hot weather, the plastic heats up and releases toxic substances into the air, which can have a negative impact on the health of children. For this reason, it is better to refuse plastic structures altogether.

Types of garden swing designs

In addition to classification by material, garden swings can be conditionally divided according to the method of fastening the moving part of the product:

1. horizontal swing - such models are probably familiar to every person since childhood. The structures are long crossbars that have a fulcrum in the middle. In order to swing on such a swing, you need two kids with approximately the same weight;

1. swing with vertical suspension intended for individual use. Among these structures, there are many various kinds: from simple "bungee" to solid original sofas and benches.

Swings also differ in location, and they can be placed either as part of a whole play complex for children, or stand or are suspended separately.

Having shown imagination, you can combine these two features as you like, as a result, amazing designs are obtained. For example, sofas suspended on chains, as well as circular swings resembling gazebos, are especially popular today.

No less important is the classification by size:

• product for the whole family . As a rule, they look like a bench with a comfortable high back. Several people can swing on such a swing at the same time;
• children's products with obligatory strap. Such swings can be different: include a seat and suspension or have seats in the form of chairs, etc.;
• portable models are convenient and mobile, they can be located at will where it is necessary.

How to make a wooden swing with your own hands?

If desired, a wooden swing can be made with your own hands. It is necessary to decide in advance on the material, design and purpose. In order to decide which appearance will have a product, you can see on the Internet a photo of a swing made of wood.

For work you will need:

• wooden bars 100x100 or 50x100 mm. It does not matter if the design turns out to be massive, but there is no doubt about its strength;
• boards needed to build the seat. The footage of wooden parts is calculated in accordance with the drawing of a wooden swing;
• a chain or strong ropes and a carabiner;
• mortar from concrete;
• nails and screws;
• metal corners.

Of the tools you will need a hacksaw, a hammer, a drill, a tape measure and a screwdriver. After everything is prepared, you can proceed to the main work process, which consists of the following steps:

1. Production of a bearing support

Initially, a lower frame is constructed, on which vertical bars are fixed. The dimensions of the bars are set in accordance with the dimensions of the seat of the future design. All these measurements are recorded in the drawing of a wooden swing. The most optimal will following sizes: depth - 60 cm and length - 180 cm. The frame must necessarily be slightly wider than the seat, by about 50 cm. This condition is necessary for better stability and reliability of the entire structure.

After all the materials are measured and prepared, you can begin to fasten the bars with metal corners. When making and installing garden swings made of wood with your own hands, it is necessary to take into account the type of surface on which the structure will stand. If the swing is mounted on open ground without asphalt and concrete, then the bars from which the lower frame is made must be covered with bitumen. This composition will reliably protect the wood from decay.

At the upper points, the side supports in the form of isosceles triangles are connected by a crossbar, to which the seat is suspended. We lay out the lower part of the support, the swing platform. The side supports are poured into pre-prepared pits at an angle to each other. concrete mortar Cross bars are installed. The ends of the beams are treated with resin or bituminous varnish. The crossbars are fixed with metal corners on self-tapping screws. A crossbar is installed between the side "L" - shaped racks and attached to them with large nails through clamps. The supporting structure is ready

After the frame is ready for it, vertical bars are mounted, which will play the role of supporting pillars. Installation is carried out using self-tapping screws and metal corners. In the end, you will get a pair of triangles, a horizontal crossbar should be fixed on their vertices.

1. seat manufacturing

First you need to assemble a frame from the bars. In total, you will need two such frames: one for the seat, the second for the back. Plywood or slats are attached to these frames - it all depends on which option suits you best. Sitting connects to a back also corners.

Experts recommend leaving an angle of 120 degrees between the seat and the back - it is this slope that will be optimal and most comfortable for sitting. Another element for additional comfort will be armrests, but they are not required.

Seat construction diagram Swing seat mounting options Wooden seat

1. Fastening

Hooks or staples are attached to the top bar. A chain or cable is threaded through the holes in them. Their length is calculated so that a person sitting on a swing can reach the ground with his socks.

After that, the seat is attached. If desired, the design is complemented by an awning. To do this, build a frame of bars, and then pull any waterproof fabric over it.

All joints are fixed with metal corners. Powerful screws are screwed into the crossbar for attaching chains. Lastly, a seat is attached to the crossbar. Ready-made swing for a summer cottage

The wooden seat will be hard, so it is recommended to put a couple of pillows on it for comfort. For long-term use of such accessories, it is better to make covers that can be updated or removed at any time in order to clean them.

If you were worried about the question of how to make a reliable wooden swing with your own hands, then you already know the answer.

Video instruction

How to make a metal swing

Garden swings made of metal can be made with your own hands, without resorting to the help of specialists. For this you will need the following materials:

• 9 metal pipes with one diameter;
• 8 corners;
• two metal arcs with a diameter of 16 mm and a length of 25 cm;
• 2 wooden elements;
• a couple of pieces of furniture foam rubber and 2 zippers;
• cable.

Of the tools you will need welding machine, as well as paint for metal.

Do-it-yourself metal swing - diagram

Stages of making a swing:

1. Preparatory work. This stage is very important, because it is at this moment that all calculations are carried out, and then a drawing of a metal swing is created.
2. Support manufacturing. Based on the calculations, a drawing is created that will help you make a garden swing from metal with your own hands. Pipes are prepared for welding: rust is removed from them, the required length is measured, and a chamfer is removed on both sides at the joints at an angle of 45 degrees.

Based on the planned swing scheme, it is necessary to weld the pipes. When the support is ready, arcs are attached to the upper part, on which the swing will then be mounted. The design is covered with a special paint for metal.

Poles are mounted in the ground. There are 2 bearings on the crossbar. The grooves in which the crossbar lies.

We must not forget that the practicality and aesthetic appearance of the future product will depend on the professionalism of the welder. For this reason, you should not start work if you are not confident in your abilities, entrust this matter to specialists.

1. Creating a seat. Segments of a metal corner are welded according to the previously planned scheme of a garden swing. The seat inserts are sawn out of wooden canvas, and then they are inserted into ready-made metal rectangles. For sitting, you can sew soft mattresses that will become a comfortable addition to the whole structure.

Seat parameters Back parameters Required places for welding metal parts Finished seat structure

1. Installation of swings on supports. For reliability, either special fasteners or a strong rope should be used. It is important to fasten the rope with high quality so that it stays in one place, this is done with the help of fasteners.

Mounting the seat on a pre-prepared support Mounting on a chain It is important to pay attention to the strength of the fasteners - bolts and chains It is possible to fasten the seat to the main structure using a carabiner Fastening the seat to the support

1. Construction installation. It is best if the swing is under a canopy or in a shaded place. metal structure will be stationary, since its weight does not allow the swing to be moved.

Features of the manufacture of children's swings in the country

When building a structure that is intended for children, some important nuances should be taken into account:

• the swing should be as strong and stable as possible;
• without fail, seat belts and special fences must be present on the swing for children;
• when making a swing, one should build on the height and weight of the child;
• it is very important that the baby has the opportunity to reach the ground with his socks and get up on his own;
• all materials that were used to create the structure must be environmentally friendly, safe and hygienic.

All these conditions must be taken into account when building a children's swing for a summer cottage with your own hands, because only in this case you can be completely sure of the safety of your child.

How to make a swing out of tires?

Swings can be made from wood or metal, however, if you want to simplify the task using improvised materials for this, ordinary tires are fine. You can fix such a product on a tree branch or place it near any body of water.

The advantages of such a design include ease of manufacture, cost-effectiveness, as well as new sensations that every person who uses such an invention will feel. In addition, to make a garden swing from tires with your own hands, you will not need any drawings and diagrams.

Stages of making a swing:

1. First you need to install two pillars, which can be wooden or metal. It is very important that the posts are strong enough to withstand all expected loads.
2. A crossbar is mounted in the upper part of the bars, and bolts with rings cut into it, into which a rope or chain is threaded.
3. At the bottom, the rope will be attached directly to the tire itself.

Take old tire without serious damage Wash the tire inside and out thoroughly with a cleaning agent Obtain three medium diameter U-bolts Drill six holes (two evenly spaced) for the selected fasteners Bolt holes Check in advance that the bolt holes are drilled correctly Paint the tire spray paint in your desired shade and let it dry properly Now place the bolts in the holes And fasten with washers from the inside This will result in a design For the top of the swing you will need a strong chain with fasteners To create robust design you will need four U-mounts Each of the bolts in the tire needs to be attached with a chain mount. On the other side, connect the chains with one mount. Fix the two ends of a small chain intended for attaching a carabiner in the same place. You can hang the swing in any place convenient for you!

When creating a swing from a tire, it is necessary to take into account the mass of each element, since in the case of using wooden poles, their tensile strength is important. In general, this design is more suitable for adults or older children, but not for babies. For greater reliability, it is recommended to use not a rope, but a metal chain as fasteners.

Now you know how to make a garden swing with your own hands, it remains only to choose the most suitable design, materials, and you can get to work.

Remember childhood sensations from the swing? This is not only pleasant, but also useful - monotonous rocking trains the vestibular apparatus, and also calms nervous system. The second property is very useful in our time. Such a pleasant treatment-relaxation after a busy day. Moreover, any person with “straight” hands can make a swing with their own hands. There are, of course, complex models, but there are many more simple ones.

About designs

Like most outbuildings, swings are most often made of wood. Racks and crossbar - from timber, logs, seats - from planks and even from parts of home furniture.

A little about designs. There are three main types of hanging swings, or as they are also called - boat swings, sofas, benches, etc. The main difference is in the type of support structure: there are A-shaped and U-shaped. You see an example with racks folded into a triangular structure above, and in the photo below an example with a U-shaped rack. This is more likely with a hanging bench and it is built according to the same type, only taking into account swinging loads.

There is a third type - this is already a complex structure that requires certain skills - it is based on articulated joints and they swing from their feet to the floor. We will immediately give both photos and diagrams for those who wish (you can expand it to full screen by clicking on the arrows in the upper right corner of the picture).

We make a swing with our own hands from wood

Most often, they independently make a design in the form of the letter "A". It is simpler, requires less material consumption. We will analyze the nodes, fasteners in more detail, talk about materials, protection against destruction and stability.

materials

Immediately about what to make a wooden swing from. The choice of lumber section depends on the planned load. If it is assumed that one adult will sit, the uprights and the upper crossbar are at a minimum - 50 * 70 mm. If a larger number of "seats" is supposed - two or three, then the cross-section of the beam is at least 100 * 100 mm, better - 100 * 150 mm. It has been experimentally established that such a design, when using a beam of 100 * 100, can normally withstand a total load of about 200 kg. If you need more - take a larger section, or put logs))

About what the bench / sofa is made of. A bar 70 * 40 mm will go to the frame, the back height is at least 600 mm, the seat depth is at least 480 mm. You can experiment with the depth of the seat and the angle of the backrest: there are options for a “lying” position. Accordingly, both the length of the sofa and the dimensions of the structure change greatly from this. For fastening use nails 200 or studs at least 10 mm in diameter.

How to position the racks

Scheme with dimensions and a list of the required material in the photo below. To be frank, few people make from such materials as indicated in the specification. More often they put a bar.

There are varieties of this design: with or without a lower frame. If the swing is installed on a hard platform and the fasteners are made rigid, on studs, without the possibility of backlash, then such a design will stand without problems. If in doubt, you can make a screed from a bar along the bottom, nail it with studs to the coating, or drive the staples into the ground.

A crossbar has been added here, there is nothing to disperse. simple design, but the "legs" can move apart

For those who are afraid of lateral loads - the design in this axis is not the most reliable - we can offer to install racks with a slope. The area will be large, but the stability will be high.

If installation in the ground is intended, parts of the posts that will be buried must be treated with bio-protection. As a cheap option, put it in a vessel with used oil for several hours. Dry, then bury. They bury to a depth of at least 50 cm, pour a little rubble on the bottom, set up racks and concrete. If you are afraid that this is not enough, attach a few strips of metal crosswise at the bottom. Hole to be dug bigger size, but the holding area will be larger.

Ways of fastening the crossbar

In all swings of this type - with racks sawn at the top with bars - the problem is the attachment point of the crossbar, to which the bench is then hooked. In the photo above, it is solved reliably, although not entirely aesthetically pleasing. The trouble is that aesthetic methods are difficult to perform. And, if you are not for sale, it's faster to do something inelegant, but reliable. So, in order to fix the crossbar, an overhead beam is attached below the intersection, pulled to the uprights with studs. A cross member rests on it, which is held from lateral shifts by racks and fasteners - nails and spikes.

Another way to install the crossmember is to mount the side racks in the form of the letter "X". With this option, the carrier beam fits perfectly. It is additionally fixed with nails, and the racks are pulled together with studs. See the next photo for this.

Everything is fine, but the length of the sofa is not enough ...

By the same principle, a do-it-yourself swing is assembled from logs: the side ones are fastened crosswise, and a support log is laid on top. If the timber is sometimes assembled on nails, then in the case of logs, studs are mainly used.

For those who are familiar with carpentry, there are other options: half a tree. Such a project is in the photo gallery below with close-ups of some of the key nodes.

How the racks are fastened together - inside view

Photo gallery of homemade swings on chains

And a few photos of different swings made on the basis of an A-shaped design.

From thin logs under a reed roof - it looks great Chic option - 3-seater, or maybe more, a swing manufacturing This is a whole swing house .... cool Immediately and a ladder ...

Fastening the swing to the crossbar

The swing mount also requires clarification, that is, it is not obvious to everyone how to hang a bench-sofa on the crossbar. First, the crossbar is drilled from the bottom up through. A bolt is passed through the hole, to which the eye nut is attached. One or two wide washers are placed under the nut head so that it does not squeeze under weight.

It turns out that the eye-nut ring is located at the bottom. You can attach a carabiner to it, throw a rope or cable, etc. Just note that the carabiner should hang normally, freely on the eye-nut ring. And in the carabiner, two links of the chain should fit freely. Therefore, it is advisable to buy everything together in one store: you can try on the entire knot at once.

By the way, in the rigging store you can stumble upon other devices that can be adapted for attaching chains or ropes from the swing seat. For example, such as in the photo below.

They are designed to lift loads from 0.5 tons, so it makes no sense to use them for children, but on a swing for adults - quite.

Such a mount has a significant minus - a creak is heard when swinging. For a while, you can get rid of it by lubricating the knot, but this operation will have to be repeated periodically. The way out is to make a knot on bearings, but you can’t do without welding.

Do-it-yourself metal swing

Their structure is exactly the same. The material is different, and the way it is attached. This is welding. For those who are familiar with, it will not be difficult to cook something similar. And for inspiration, a photo report.

Below is a drawing of this swing with dimensions. Some explanation is required. In the figure there is a pipe welded around the perimeter (this plane is shaded). It is buried and therefore not visible in the photo. It was made in order to increase stability: the masses of friends are considerable. For the same reason, metal plates are welded onto the ends of the racks. The installation was complicated, but the swing is tight.

It took 22 meters to make profile pipe 50 * 50 mm, for a seat 25 * 25 mm - 10 mm, boards 2000 * 120 * 18 - 7 pcs and the rest - fasteners, paint, anti-rust.

There is another way to attach the swing to the crossbar. He is in the photo.

A way to make a metal swing mount to the crossbar

The original form of a swing from a profile pipe - the racks are non-linear, but curved. If it is possible to do this with a tree, then only the master.

Baby swing

For children, you can make the same design, but smaller.

There are several other models for , but about . Here are the first ones - a swing-scale or a balance beam.

Swing for children - balance beam or scales

Everything is clear, questions may arise only on the attachment point. Below is a drawing with dimensions. To strengthen the upper part, steel plates are fixed inside. To make them swing, a hole is drilled into which the pin is threaded. You can improve the "rolling" by inserting bearings.

You can quickly and easily make a nest swing out of a tire ( car tire). Bolts with eye nuts are installed in it at four corners, but of a smaller diameter (do not forget about the washers), ropes or chains cling to them, and you can even throw them on the corresponding branch on the tree, even hang them on the horizontal bar.

A favorite detail is a garden swing made of wood. They are equally liked by adults and children. It's nice to stretch out on soft pillows in the shade of trees, relax, dream under the measured swaying. And for children, this is the main entertainment.

The classic design of a wooden garden swing using a chain

Manufacturers present a large selection of ready-made models from different materials. They differ:

Conditionally share a swing for adults and children. Large sofa-type models designed for several people are the most popular type. They additionally complete with an awning, soft pillows.
Attract attention suspended structures with spring. The seat is made in the form of a basket-cocoon from a vine, rattan. They are hung from the thick branches of trees.

Design and construction of a wicker garden swing in the form of a cocoon

Cabinet sofas, attached on ropes to tree supports, beams, will add romantic appeal to a corner of the garden.

For fun, active rest suitable Russian swing for several people. Practical and convenient for relaxation, rest designs with mosquito nets, a tent.

Children are smaller in size, according to the growth of the child. Additionally, they install safety elements, side supports.

Classic Russian swing assembled from logs using a chain

Main types:

• balancers;
• suspended;
• pendulum;
• carousel.

You can choose a model according to your wishes, idea of ​​relaxation, landscape style.

How to make a wooden swing with your own hands

Swings are most often made from wood. It has many advantages:

Such a swing is easy to make, even with minimal carpentry skills. Remember that a tree needs protection from moisture, temperature changes, snow, sun, pests. Therefore, all structural elements are opened with moisture-resistant varnish.

Material selection and tools

They begin work by auditing the existing material, selecting wooden blanks. Choose a model, draw its sketch.
The second option is easier. It is necessary to select a product, study the drawing and calculations. Based on them, purchase necessary material for blanks.
Prepare the instrument. For work you will need:

Drawing with optimal dimensions swing for installation on suburban area

• for measurements, marking - tape measure, construction pencil;
• jigsaw, they cut out individual parts;
• hacksaw, circular saw (cut the main elements);
• building corner, level;
• planer for woodworking;
• clamps tighten individual elements;
• screwdriver, hammer;
• tighten the mount with wrenches;
• electric drill, screwdriver.

Ready-made drawing of a country penitent sofa under an awning

Fasteners are also needed: self-tapping screws, screws, fasteners for rafters (connect complex nodes), eyebolts with washers. Cleaning, grinding wooden surfaces sandpaper, or a nozzle on a drill. The swing is painted, opened with a protective varnish.

Scheme of a garden swing

Scheme of the arrangement of structural elements of the swing prepared for assembly

A popular model among summer residents, gardeners is a swing sofa. They are mounted on two types of racks, "A" and "P" shaped. The material for them is timber, logs.

With a sofa seat length of 2 m (per 200 kg), the recommended section of the racks is at least 100 x 100 mm, for portable ones - better than 100 x 150; 200 mm.
You must first select a location. A straight platform will ensure the stability of the structure. The optimal location is in the shade behind the house. Then a design diagram is drawn.

The location of the garden rocking chair in the shade of a tree will allow you to relax on a hot afternoon.

It includes:

The design option for a resting place in the form of a sofa is a great place to relax

Fasteners: self-tapping screws, screws, eye nuts with bolts (to secure the chain), metal corners, carabiner for attaching the swing. The sofa is hung on a chain.

Step-by-step instruction

A do-it-yourself swing made of timber is a simple and reliable country furniture

To make a garden swing with your own hands from wood, you need to follow the sequence and carpentry rules. One of them is the ratio of the width of the seat of the bench and the step of the uprights, it should be 50 cm wider. This proportion will provide stability.

Step-by-step instruction:

1. Rack manufacturing. Cut blanks to desired dimensions. In the shape of the letter "A" connect the main standing supports. They must be rigidly connected, so it is better to use furniture bolts with washers.

   The process of sawing a log into bars for the manufacture of pillars

2. Mark, fasten the side rails. If it is a stationary swing, then they must be buried in the ground to a depth of 50 to 70 cm. This must be taken into account when marking the main racks.
   The process of deepening and installing frame pillars in dug holes

   The underground part of the support must be treated with bitumen, oil so that they do not rot. The design will be more reliable if the racks are cemented. The ground part is divided into three proportional parts and jumpers are mounted (on 2 sides of the main rack, on long self-tapping screws).

   The principle of processing wooden poles with bitumen or other materials

3. The next step is the installation of the main jumper. It is fastened with racks with metal corners.

   The device for attaching the main beam to wooden supports

4. From the upper side jumper to the main one, jibs are mounted (on metal corners) for stability and structural strength.

   The scheme of fastening the side struts to the main jumper

5. We make a seat. To do this, you need to make two frame structures with additional vertical jumpers. Sitting - 2 m long, 0.5 m wide; the back of the bench is 2 x 0.65 m. Planks are screwed to the frame at regular intervals, it is better to fix them with self-tapping screws. Connect both parts with metal corners. Then install the armrests of the bench.

   Scheme with the dimensions of various components of the design of the swing seat

6. Suspension installation. 2 pairs of eyebolts are attached to the edges of the backrest frame, the other to the seats. A through hole is drilled in the main crossbar, two bolts are passed into it. They put on a carabiner for attaching the swing. Then the chain links are inserted.

   An example of mounting a wooden chair on special bolts

7. The final stage is the installation, the deepening of the entire structure into the ground. The pit is dug 20–30 cm deeper than the underground part of the side post. Each installation step is checked using a level.

   An example of a rocking sofa installed in the garden with a canopy

The wooden structure will be preserved better if it is varnished and painted.

Making a children's swing

Suspended collapsible structures are the most popular type. They can be moved around the site by hanging on one of the branches of a tree. The child will always be in the field of view of the parents. Stationary hanging swings are installed on.

Placing a swing with a slide and a ladder on the playground

The sequence of installation of the structure does not differ from the usual scheme. Standard option- "P" shaped support with hanging seat. You need to take into account the age of the child. For small ones, safety jumpers are additionally installed. Children grow, so it is better to provide a mount that would allow you to adjust the height of the seat.

Safe rocking seat with jumper for small children

For this, swing carbines are suitable. The site should be flat, preferably with soft grass, sprinkled with sand. When falling, the child is less injured. Watch in the video the process of making a wooden garden swing.

Solid, suitable for the general style of the landscape, a wooden swing in a summer cottage is a joy for children and adults. Purchased public models usually do not differ in quality and variety. It is much more interesting and useful to approach the process on your own and make a country swing, giving your site a unique flavor. After all, there is nothing particularly difficult in this.

Wooden swings are divided into three main types:

• • frame, standing on stationary supports (classic version);

Frame swing

• • hanging on ropes or cables, such as "bungee";

Suspended swing, "bungee"

• swing-"scales" or balancing. This type of swing is for two.

Any model is played up in such a way that all the neighbors will envy, and the household will choose their favorite corner of the garden or yard.

Where to place?

If the choice is made in favor of the classic "bungee", we hang it on the nearest tree, which inspires confidence in terms of strength. When choosing a place for other types of structures, it is reasonable to consider the following factors:

• sufficient distance from walls, fences, trees, wires, thorny bushes and pointed objects;
• illumination. It is desirable that the sun hit the site until the evening. So wooden material insured against dampness;
• it is better to immediately pick up a smooth surface relief so that you do not have to carry out additional work;
• the place should not be "blown through with all the winds." Drafts are fraught with quick colds.

It is good if there is sand or a soft lawn under the swing. This will help in the event of a fall not to get serious injury on a stone or rebar.

Drawing

You can do without it. But if a serious project is conceived with a claim to durable service, then it is better to prepare a drawing of a swing for reasons of saving material. Designing a homemade swing is not difficult.

General provisions that reflect the drawings of a garden swing made of logs:

• frame structure;
• dimensions. For a swing, this is the height and area of ​​\u200b\u200bthe base;
• places of fastenings and reinforcing elements should be marked;
• number of seats and their type;
• the length of the suspensions and their type.

An example of a drawing of a wooden swing

Material selection

It is important to focus on the quality of the material from which the swing will be made. High-quality wood will not only ensure the durability of the structure, but also guarantee the safety of use.

Species such as cedar, oak and larch will not deceive expectations. Spruce, pine and birch are also strong enough.

Lumber must be chosen dry, without traces of mold or foci of decay. There should be no falling knots, crevices, holes made by pests. A large volume is not required for a wooden swing, so you can check every board and beam.

Tools

To make a wooden swing you will need:

A strong branch

• mix for concrete mortar;
• nails, self-tapping screws, bolts, corners (in accordance with the project);
• tape measure and plumb;
• hacksaw;
• hammer;
• antiseptic for processing wooden parts;
• grinder (or drill with a nozzle);
• screwdriver

This is the main arsenal. When everything is ready (material, drawings and tools), we begin to make garden swings from logs.

Caring for a wooden swing

1. Annual treatment with a special compound or painting will save the product from decay and pests.
2. From the end to the beginning of the season, it is necessary to cover the swing with waterproof material.
3. Avoid rust on metal parts.
4. Do not give disproportionate loads.

Such a swing will delight more than one generation, subject to these simple and understandable rules.

And if they fit better into the design of your garden, then it will be more difficult to make them. But they will last you longer.

No need to think that only children love to swing on a swing. Adults are also not alien to such entertainment, especially in terms of relaxation and relaxation. Of course, there is a constructively different approach to such swings, they are larger and more massive than children's ones, and how many there are interesting options! Now let's talk more about this. In this article, we will present for you a photo of a country swing that is easy to make on your own with your own hands.

What material is best to make them

The main requirement is safety and convenience, and you can make both highly artistic options and from waste material, for example, from old tires, from tarpaulins. They can be wood or metal, they can combine both materials, with decorative trim and without - everything to your taste and wallet. Correctly calculate the load on the supports, and it is better to attach a canopy from the sun to such a swing, this will add even more comfort to the rest.

What are they generally

To make a country swing with your own hands, you will need drawings, which you will also find here. It is better that such an element fits into the overall picture of your landscape. Decide in advance if they will be for children only, or more universal option, in what place of the site they will be located, whether they will be year-round or seasonal. Remember, oversized models will not look decent in a small area.

Also, options can be suspended or on racks.

And more interesting models can also be made independently, for example, a swing-balancer or a swing-sofa, a swing-hammock.

• Children will love the swing in the shape of chips.
• Youngsters will love the L-shaped rack model with a suspended oval chair.
• The classics of our childhood are boats, rockets, etc.
• The swing can be from a hoop or from forged elements.
• And now, in the spirit of the times and with the Accessible Environment program, we have created a swing for the disabled, where you can fit with a wheelchair.

Homemade hanging swing.

Well, it's time to tell you how to make a country swing with your own hands. The first option is the simplest. This is a frameless option, where the seat is suspended from chains or a rope from beams or thick tree branches.

Swing from old tires.

The most elementary option, where the tire on chains or ropes is suspended from a tree. You can bolt it to the ceiling beams at home.

The tire can be placed horizontally, for this you need to make several holes in it and insert hooks into them, fix them in a reliable way, then thread chains or ropes into the holes and hang them in a convenient place.

For lovers of something unusual, you will need a grinder and a virtuoso possession of it. You will need to cut out several parts from the tires according to the templates and, having bent them, fix them in the form of a bird or beast.

Classics of the genre - wooden swings.

Also in this article we will talk about how to make a wooden swing for a summer residence with your own hands. As a seat, you can do not only simple boards, but also tree cuts, wooden grate etc. You will also need chains or ropes for hanging.

Or you can adapt an old wooden chair for a swing by cutting off its legs.

A swing from a hoop or a metal circle can be built by weaving a rope web in its center, which will serve as a seat. But it is better to soften the metal before braiding by fixing foam rubber or a soft cloth on it. It is better to fasten the hoop at four points, hang it as usual, on ropes or chains.

There is a version of a swing and a hoop with a metal basin inserted into the center. The edges of the pelvis must exactly match the diameter of the hoop for secure fixation. If this option does not find its fans, it can easily be converted into a simple flower bed.

Canvas swing.

In addition to the tarp itself, stock up on metal rivets and two wide metal triangles. We stitch the tarpaulin several times, insert triangles there and fix it all with rivets. Next, we hang it in the chosen place.

Swing made of wood on support posts.

What you need to prepare:

• wood material.
• strong ropes.
• fastener elements.
• plywood and a picket fence for a bench.

As fasteners, it is best to stop at galvanized bolts, and it is better not to consider simple nails and screws as such.

Glazing antiseptic will save all wooden structural elements from damage and give them a natural look.

When assembling the swing, use wooden beam. From it you can make a frame for hanging the swing itself, or you can hang them on a strong tree.

If we do it anyway wooden frame, the lower ends of the racks are treated with bitumen. Then they need to be installed in prepared pits about 1 meter deep and backfilled with sand + crushed stone by 30 cm. Now you can pour concrete.

Or there is an option of attaching a wooden swing to ready-made concrete pillars with anchor bolts. In this case, do not forget to lay waterproofing between them. Braces will give the structure additional stability.

And we make a seat for such a swing according to this instruction:

To begin with, we prepare the support arcs in the form of clubs. Pine boards 22 mm thick and plywood 12 mm thick will work best for this. According to the finished template, it is not difficult to cut them out, in total you need 6 pieces.

On plywood blanks we draw the outlines of the core, and we make the middle layer from a glued shield. At the extreme sticks in the outer layers, we make cutouts for the ropes.

We connect the workpieces with waterproof glue and place them in a clamp. We are waiting for the complete drying of the parts.

We grind with a machine to give roundness.

With a drill with a special nozzle, we cut round pieces for rope holders from a pine board.

Now it is necessary to treat the rounds and supports with either a primer or an appropriate weatherproof paint.

The metal holders of the ropes are screwed into the supports through the rounds. Now you can cover everything with acrylic paint.

Let's go to the bench. Align the picket fence to start.

We drill a hole for the screws in each picket. For accuracy in such work, you can use a corner with a ready-made hole.

We fasten the pickets to the supports with screws. For even gaps between the planks, you can insert a board.

We install the armrests in the appropriate places. They are also made of shtaketin. We place metal bolts at the ends of the slats. A round piece of wood is placed between the armrest and the support.

It is time to thread the rope through the holes of the holders, which are placed in the swing support. You need to tie a rope on sea knots, and then wind a cord, wire or strong thread around it.

We cut the rope with a knife.

We pass it into the oval holes in the armrests. They, in turn, rely on a pair of half rings, which are bolted together.

It remains to hang the ring on the alpine carabiner, which is already fixed in the crossbar of the support or in the tree. Everything is ready, swing to your health!

An approximate calculation of the cost of such a swing

Now you know how to make outdoor swings for summer cottages with your own hands. But before you start building them, it is worth making certain calculations.

Name Quantity Price in rub. Price:

• Moisture resistant plywood sheet 1 pc. 680 680
• (1525x1525mm) 12 mm thick.
• Pine boards 2 pcs. 19 38
• Pine fence (slats) 18 pcs. 24 432
• Jute rope diameter 16 mm. 10 m. 20 200
• Waterproof glue for wood 1 pc. 69 69
• "Moment Carpenter"
• Acrylic paint for facades
• And fences Nordica Eco (Teknos Finland) 0.9 l. 533 533
• Glazing antiseptic Valtti Color 0.9 l. 399 399
• Extra (Tikkurila, Finland)
• Fasteners 1 set - 1200

Swings made of metal, suspended on support posts

It is also not difficult to build a beautiful metal swing for giving with your own hands. This is an easy DIY option.

We cut blanks of the required size from pipes, we need side racks 2 meters long, a crossbar 1.5-2 meters long, and 4 pipes of arbitrary size for the base (2 pipes on each side).

We clean the cuts on the pipes with a sandpaper for metal or a file.

We weld pipes at a right angle on the warp.

We weld on the base of the rack, and to them the crossbar.

We prepare 4 holes with a depth of 80 cm.

Install there metal beams a little longer than the depth of the pits.

Now we pour concrete there, which can be prepared independently by mixing cement, crushed stone and sand 1x1x2. It remains to add water and mix well.

Leave for a week to solidify.

Hooks can be made from akners, and we weld them to the crossbar.

We weld the frame of the swing to the metal beams.

Fix the seat.

The product is ready. How nice it will be to relax on a swing of your own making!