Do-it-yourself electric flycatcher. Effective ways: how to get rid of fruit gnats. How to DIY a fly trap with an ultraviolet flashlight

There are a huge number of various fly traps from domestic, imported manufacturers. They differ in the principle of operation, design, efficiency, price. You can easily make a fly trap with your own hands from improvised means or with minimal financial costs.

Types of traps, principle of operation

Fly traps do not harm human health, are environmentally friendly, and are not inferior in efficiency to purchased drugs. The devices are easy to use, sold throughout the warmer months throughout the affordable price... There are tons of tips on the internet for making homemade traps effortlessly.

Popular types of traps are:

• insecticidal fly exterminator;
• ultraviolet destroyer;
• electronic fly swatter;
• window fly trap;
• bait trap.

In the process of selecting a trap, it is imperative to take into account the radius of influence, the area of \u200b\u200bthe room in which the device will be used.

• Ultraviolet fly exterminators are lured with ultraviolet light. Flying up to the device, the insect receives a discharge of current from the grid behind which the lamps are located. When flies die, they accumulate in a pull-out tray that is easy to clean.
• A fly trap is made on the basis of a container with a bait inside. Does not consist of poisons, others harmful substances... Once trapped, the fly cannot get out. Some types of traps are supported by the thermal effect or emit carbon dioxide, mimicking human breathing. This is how pests are attracted.
• The electric swatter is a subspecies of fly killers. The principle of operation is identical. Due to the glow, it attracts insects to itself, after which it kills them with a current discharge. The device is safe for people to use.
• Window fly traps are made to fit. A sticky compound is applied to both sides of the trap. One side of the trap is attached to the window, the other duct tape attracts flies to itself. It is recommended for the best effect to cling to windows from the sunny side of the house. Change as insects stick. The manufacturer indicates that such a device is enough for six months.

On a note!

The principle of operation of absolutely all traps is to attract insects. The destruction process itself is different. They attract flies with warmth, smells, light. Based on the mechanism of action of purchased devices, structures, you can make them yourself.

They are conventionally divided into two types - baits, Velcro. You need to put a favorite treat of flies inside the baits. They use jam, rotten fruits, vegetables, honey. It is better not to use fish, meat because it quickly begins to emit a fetid odor. For flies, such aromas are a joy, but it is impossible for a person to be near such bait.

You can show ingenuity, come up with your own effective design.

Electric fly trap at home

In most cases, the device is bought, but you can make it yourself.

You will need:

• housekeeper light;
• high-voltage module;
• insulating tape;
• hot glue;
• finger battery.

Manufacturing process:

1. Disassemble the light bulb so that there is a plastic case, a bulb with tubes that are attached to the case.
2. Make a through hole in the plastic, take an aluminum wire, thread it through one of the holes.
3. Wrap the wire around the light bulb, remove all unnecessary. Do the same with the second hole.
4. There are 2 wires inside the base. Wrap one on the tip of the wire and bend, there will be 2 contacts.
5. Connect the high-voltage module to the finger-type battery through the switch.
6. Make holes, insert the switch, the module into the case.
7. It is necessary to solder the wiring, wrap the soldered module wires to the battery with electrical tape, and glue the module to the base with hot glue.
8. Insert a light bulb into the base so that the contacts touch the contacts of the module, screw in and turn on the device.

On a note!

Flying into the light of an electric trap, pests upon contact with it will be struck by a current discharge. The method is very effective, but also dangerous. Not recommended for use near small children, pets. There is one drawback - as soon as the battery runs out, the device needs to be redone. Not everyone will want to mess around with preparing a complex structure. Most people prefer to buy a ready-made appliance.

Popular commercial fly traps

When choosing effective means pay attention to the following products:

• Destroyer Pomel DUO LT-60 (Poland). A trap that uses removable sticky paper cartridges instead of electrical discharge. Emitting ultraviolet light, it lures insects to itself, which, when ingested, stick to paper. Due to the absence of a spark, this destroyer can be used on explosive objects. It receives power from a 220 V network. In the middle there are 4 lamps of 15 W each, 2 replaceable sticky paper cartridges. Dimensions of the device 350x470x120 mm. The price is about 2000 rubles.
• Light trap Economy 14 w (Poland). Effectively fights flies, mosquitoes. Inside is an adhesive paper cartridge. Insects, flying into the light, fall into the trap, immediately sticking to the trap. Ideal for children's rooms, bedrooms, kitchens. Range of action up to 40 sq. m. Powered by an outlet. The parameters of the device are 65x280x330 mm. The cost is about 2500 rubles.
• Destroyer N'oveen IKN-36 IPX4 (Poland). The principle of operation is the same as that of other exterminators. Suitable for indoor and outdoor use. It is waterproof, so destruction takes place even in rainy weather. For the best effect, you need to hang it away from other light sources at a height of up to 2 m. The radius of action is up to 120 sq. m.Dimensions 510х135х310 mm. The price is about 3000 rubles.
• Vaco window trap (Poland). Attached to the window with the adhesive side. Insects are attracted by the pheromones that come from this trap, and when they sit on it, they stick tightly. Change as the tape sticks to flies. Valid for up to 6 months. The price is about 50 rubles.

What traps to use indoors: purchased or homemade - an individual solution. It is necessary to focus on efficiency, safety, ease of use. The electric fly trap is more powerful, but also the most expensive for the price.

One of the most annoying and ubiquitous insects is the fly, which often flies into our homes. Sitting on a variety of surfaces and food, it carries on its paws a mass of pathogenic bacteria that can harm human health. The intrusive buzzing of an intruder often irritates us. However, not everyone can destroy the fast and agile fly with the help of a fly swatter. In this case, simple and convenient fly traps that you can make yourself will come to the rescue.

Simple homemade flycatchers

Before you start hunting flies, you need to determine what attracts them to our homes. First of all, these are products that are an optimal breeding environment and a source of nutrition. Slightly spoiled meat and fish with a smell will instantly attract the attention of flies seeking to lay their eggs. It is for this reason that most often we cannot do without such baits.

There are the simplest fly traps that can be made from scrap materials without having any special skills:

• bait-based traps;
• traps with poisonous baits;
• sticky traps;
• flycatcher-electroshock.

However, the process of creating an electroshock flycatcher is not simple and requires certain experience and professional skills.

Trapped by their plastic bottle

It is not difficult to make a flytrap from a regular plastic bottle. To attract the insect, an edible bait with a fragrant smell is used:

• liquid jam;
• coca Cola;
• any sugar-containing liquid that has undergone a fermentation process. For this purpose, you can add a little yeast to sweetened water;
• wine;
• beer;
• rotten fruits.

Council. Do not use meat and fish products as bait, the stench will quickly spread throughout the room.

To make a trap you will need:

1. Cut the plastic bottle into two equal parts.
2. Turn the upper part of the bottle, resembling a funnel, upside down and set in the lower part. In this case, the neck of the bottle should not touch its bottom. For best results, keep in mind that the ratio of the height of the top and bottom of the bottle should be 1: 2.
3. To ensure the strength of the structure, secure the funnel using a stapler or tape.
4. Pour liquid bait on the bottom of the bottle.
5. Set up the trap where insects are most likely to occur.

Council. If you add ground pepper or any granular insecticidal preparation to the sweet liquid, it will turn into a poisonous bait for flies caught in the trap.

Video: making a trap from a plastic bottle

Glass jar trap

A similar trap can be made from glass jars and a plastic funnel:

1. Take a jar suitable size, and put slightly rotten sweet fruits on the bottom.
2. Turn the funnel over with its narrow end down and place it on the jar in the form of a makeshift lid.
3. Secure the funnel with tape or tape, trying to seal all the cracks.

The jar can be placed near the trash can or on the windowsill, because flies always fly towards the light.

With the help of such a trap, you can catch not only flies, but also wasps and mosquitoes.

Plastic container trap

A small transparent plastic container can be useful for making a simple and reliable fly trap. For this purpose, you can use plastic cups or special containers for food:

1. Place an edible bait on the bottom of the container.
2. Tighten the top of the container with cling film, punching small holes in it with a knife.

The fly, sensing the smell of food, will try to penetrate into the plastic container through the holes in the film, however, the insect will no longer be able to get free.

Important! Try to dispose of the contents of the traps from time to time by removing captured insects and changing baits. Otherwise, such structures will become sources of unsanitary conditions.

Duct tape

Adhesive tapes are especially popular with fly hunters.
Prepare a composition from the following components:

• rosin or pine resin, previously melted in a water bath - 2 parts;
• flaxseed or castor oil - 1 part;
• sugar syrup or honey - a small amount for taste.

Actions:

1. Mix all the ingredients listed.
2. Using parchment, kraft paper, or oilcloth, cut the strips 3-4 cm thick.
3. Apply the adhesive to the paper tapes.
4. Hang the ribbons where insects are most concentrated.

Video: "mittens" sticky fly trap

Council. As an adhesive, you can also use a specialized glue ALT, designed to combat rodents.

"Folk" fly repellents - plastic bags with water

Another way to keep flies away from your home is to use plastic bags filled with water around doors and open windows. The inventor of this method is a Swedish citizen named Sten Lindqvist, who claims that the effectiveness of this method is comparable to that of mosquito nets.
To create this kind of bleach you will need:

• transparent cellophane bag;
• pure water;
• several coins.

Actions:

1. Pour water into the bag.
2. Dip shiny small coins into the bag.
3. Tie the bag tightly.
4. Hang it from the side of the street near front door or an open window.

The principle of operation of such a device is based on the specifics of insect vision. Perhaps the sunlight hitting the coins through the water column blinds the flies, making your home invisible to them.

Video: the most harmless way to get rid of flies

However, reviews about the effectiveness of such a repeller are very contradictory.

On the weekend I went hunting with a friend on his estate, a huge wooden building (round timber), many rooms and living rooms. So, entering the living room, he butted his forehead on a transparent cellophane bag with water tied to the ceiling. On a silent question, a friend's wife explained that it scares off flies which are innumerable this winter. This she spied on in Spain in butchers, where they sell jamon. So what happened next showed that there were no flies in the rooms with packages, in others (without packages) they flew listlessly in sufficient quantities.

https://forum.auto.ru/housing/2126241/

The Mythbusters in Season 10 (Episode 157) refuted the myth that a hanging transparent bag of water repels flies. They carried out a test, it turned out that the package, on the contrary, attracts!

https://www.forumhouse.ru/threads/5889/page-6

CD Trap

Another option for a homemade trap is a device made from a regular CD and an adhesive base. To make it you will need:

• CD;
• A small piece of rope;
• Honey or any other sticky and edible adhesive that can attract flies.

Actions:

1. Pass a rope through the hole on the CD and tie it with a loop. With this loop, you can hang the trap anywhere.
2. Apply honey or any other insect-attracting adhesive to the CD on both sides.
3. Place the CD in the freezer for 15 minutes.
4. After the sticky layer freezes, hang the trap where the flies congregate.

Council. If the room temperature is high enough and the sticky compound starts to melt violently, return the CD to the freezer.

How to make an electric fly trap

With certain technical skills, you can create more complex and effective trap designs at home. With the help of such devices, it is possible to catch various flying insects both indoors and outdoors.

Electric jump

Electric jump - homemade device, in which the light emanating from the light bulb acts as a bait, and the insect itself is drawn inward due to the operation of the fan.
To create such a trap, you need:

• a small electric motor with a power of 10–20 W (for example, from any class III electric player);
• an electric bulb with a cartridge;
• two cans of various diameters;
• aluminum plate 20x100 mm;
• two thick plastic washers;
• epoxy adhesive;
• two strips of metal;
• screws;
• screws M4;
• round wooden base;
• trap pouch made of nylon stocking;
• rubber ring;
• power source, which can be a battery.

Electric pumping device diagram: 1 - rubber ring, 2 - electric motor, 3 - housing, 4 - fan, 5 - cover, 6 - suspension, 7 - strip-bracket, 8 - M4 screw, 9 - washers, 10 - nylon bag

Actions:

1. Using a 20x100mm aluminum plate, cut out some of the fan blades. In the center of the plate, make a hole corresponding to the diameter of the motor shaft.
2. Then install an improvised propeller made of two plastic washers on the shaft, while bending the fan blades at an angle of 45 degrees.
3. For reliability, it is recommended to fix the "hub" using epoxy glue.
4. Fix the lamp holder securely with the screws on wooden base round shape.
5. Then connect it with a pair of metal brackets to the motor starter. Please note that the length of the strips should allow a gap of 50 mm and located between the motor shaft and the bottom point of the light bulb.
6. We set the resulting structure to tin canby fixing it with M4 screws so that the fan itself is about 15 mm below the edge of the can.
7. The base of the lamp holder is covered with a cover made from a second can. In this case, a gap of 50 mm should remain between the edges of the main body of the device and the cover. Thanks to him, the insect will see the bright part of the structure, acting as a light bait.
8. Using a nylon stocking, make a trap pouch by putting it on the lower part of the body. A rubber ring can be used as a retainer.
9. Connect the light bulb and motor to a power source by placing the unit under the ceiling of the room.

Flycatcher-electroshock

You can also use a homemade electric shock flytrap to kill flies indoors. To create such a device you will need:

• housekeeper light;
• high voltage module;
• finger battery.

Actions:

1. Initially, you should disassemble the light bulb, which may not be working. We leave the glass part of the lamp and the plastic cap.
2. Drill two holes on the sides of the plastic base of the light bulb, one opposite the other.
3. First, insert a soft aluminum wire and carefully wind it around the light bulb in one hole, and then in the other - the same wire, too.
4. One of the wires coming out of the neon lamp must be connected to one of the aluminum rods.
5. The remaining two free from each other outputs must be connected to the high-voltage module.
6. For the convenience of using the device, it is desirable to connect the high-voltage module to the power source through a switch. To do this, a rectangular hole should be made in the plastic cap left after disassembling the light bulb with a sharp clerical knife. Install a button into it, after which you can insert the high-voltage module into the lid, unsoldering all the necessary wiring.
7. Then you need to solder the battery to the high-voltage module, securely fastening it with electrical tape.
8. To ensure a more reliable fixing, it is necessary to glue the high-voltage module to the plastic case using hot melt glue.
9. Then put a neon tab with a high-voltage winding on the high-voltage module so that the two wires located in the product body and in the light bulb touch each other.
10. To prevent killed insects from falling to the floor, you can attach a plastic cap to the top of the light bulb using hot melt glue.
11. When you turn on the device, the neon light will light up, attracting a flying insect. A light touch will strike the fly with an electrical discharge.

Video: the process of creating an electroshock flycatcher

With a minimum of effort and money, it turns out that everyone can get rid of annoying flies from their home. Although the only disadvantage of such designs may be the lack of a guarantee of one hundred percent result, as well as unaesthetic appearance.

How to make an insect trap? This question is asked by all summer residents and residents of private houses. Wasps, flies, mosquitoes begin to precipitate a person on hot summer days, especially in July and August. At this time, young offspring appear, which need a lot of food. Therefore, males and females scurry in search of food. They fly for food, especially for sweets and meat. Mosquitoes annoy with painful bites.

Many people are allergic to wasp stings. Therefore, people have to apply many methods of insect control. The bites of these insects are very unpleasant, especially for children. Sometimes you have to call ambulanceto avoid suffocation due to allergic reaction. The easiest way to get rid of wasps. You can try to find the nest and destroy it. But wasps fly around the site. Mosquitoes can crawl into every crevice of the house, just like flies. Therefore, you need to know how to make a trap at home.

An effective trap for wasps and flies

There is a very effective device that has been tested by many site owners. To make it, you need a plastic bottle of 1.5 or 2 liters. The cover must be removed from it. The bottle must be cut into two pieces. In this case, the upper part should be half the size of the bottom. You will need to put liquid bait inside. So that it does not spill, you need to place the upper part in the lower part with the neck inward. At this point, the trap can be considered ready.

Any sweet liquid can be used as bait. But it is best to take fermented compote, as it has a sharper smell. This completes the instructions on how to make a trap. Insects will fly to the smell and get inside, but they will not get out. Trying to crawl along the walls of the bottle, a wasp or fly ends up in a dead end, which is formed due to the upper neck. It is better to make several such baits. They should also be reinforced in case of strong winds.

What bait is better to take

Flies are different, therefore, certain baits should be used for them. Houseflies and similar species like sweets the most. Large species are practically not interested in sugar, so it is better for them to put fresh meat or fish in the bait. Fruit flies may only be interested in fruit, juice or compote. Wasps love sugary sweets most of all, such as honey. Unfortunately, such traps will not help against mosquitoes.

Such devices are very effective. But there is a certain species - fruit flies, which rarely fly into the can. The way to make a trap for them will be discussed below. The funnel trap is not suitable for household use. It's all about unpleasant odor, which begins to emanate from the bait after a few days. But if you change it more often, then the trap is quite suitable for rooms.

DIY fly tape

The most common way to get rid of flies is with Velcro tape. These are sold at every hardware store. Flies readily sit on the tape, since it has glue applied to it, which contains a bait. The insect cannot fly away from such a device. The tape works for a while, but then the glue dries up. This device has many advantages. It is affordable, harmless to humans. The tape does not smell, does not emit toxic substances.

How to make this type of fly trap? Many people think that this is impossible. But in reality, you can make a tape quickly. To do this, you need to take linseed or castor oil, resin or rosin. You need to take glycerin, honey or sugar as bait. Melt all the ingredients in a water bath and apply them to paper tape. It will turn out to be an excellent analogue of a store device. This kind of tape is suitable for catching fruit flies, as they like to land on the surface.

Readers now know how to make a wasp and fly trap. Surely many are also interested in what goals the insect pursues. If bees live to make honey, then flies and wasps pursue completely different goals. They try to lay as many eggs as possible. One fly manages to reproduce up to 2000 larvae. Moreover, they live only a couple of months, and sometimes up to two weeks. The fly lays about 120 eggs per clutch.

A cesspool, compost heap, and even soil in a flower pot are best suited for this. The fly will appear in a couple of weeks. Moreover, the warmer the ambient temperature, the faster the larva matures. In winter, the flies sleep. An active life begins only when the total daily temperature is +20 degrees. There is one more interesting fact... Surely, many are interested not only in how to make a trap at home, but also in why flies are always sitting on the windows. They just have compound eyes, because they simply do not notice transparent objects.

Why flies are dangerous

Insects, in particular flies, are carriers of many diseases. Therefore, it is important to get rid of them in time. If wasps are dangerous because of bites, then flies can cause not only food poisoning, but also the most dangerous diseases. Some of them are typhoid, fever, cholera, dysentery, brucellosis, etc.

Unusual but easy way to get rid of flies and wasps

Not everyone knows how to make a trap with your own hands using a fly agaric. Surely no one thought about the origin of the name of this mushroom. It is necessary to collect fly agarics in August. A few hats will be enough. They should be crumbled in disposable tableware and cover with sweet water. A plate of mushrooms should be placed in the garden or in another place where insects gather. Wasps and flies will react immediately to the bait. You don't even have to chop up the fly agarics, but simply sprinkle the caps with sugar. A syrup is formed on the surface, to which insects will stick.

How to get rid of mosquitoes

For mosquito control, you can make a regular sippy trap, but there is also a better tool. It is worth trying to make an electromechanical device. To create it, you need several materials at hand. The main component of the trap is the electric motor. Thanks to him, the trap has a suction effect. It pulls mosquitoes into a special container from which they cannot get out.

How do you make this type of mosquito trap? Everything is very simple. The power supply is based on direct current. An ordinary cooler can become a fan for the device, only, preferably, large sizes... You can take a plastic bucket from mayonnaise as the basis of the case. In the bottom of the can, you need to make a hole equal in diameter to the dimensions of the cooler. The fan is usually sold with screws. They can screw the device to the bottom of the bucket. The cooler is attached outside, not inside.

Trap bait

A suitable bait will be a light bulb with a bayonet base, as well as a holder for it. The surrounding air will heat up and illuminate the space at the same time. Everyone knows that light is the main bait for insects. Instead of a light bulb, you can use LEDs. Moreover, it is more economical to buy them in the tape, and not separately. In addition to light, you will need another bait. Komarov will be interested in carbon dioxide, for which you need to dilute the same amount of sugar and 5 g of yeast in 0.5 cups of water. The bait should be added to the container to be attached to the trap body.

These are the easy but effective methods for dealing with flying insects. They are much safer than aerosols and others chemical substances... So it's better to spend some time on self-production traps than spending money on other insect control methods.

Attracted by interesting smells, they fly into houses and apartments, verandas and sheds. In addition to the fact that their presence in the room annoys residents, flies on their paws carry germs and dirt, which can cause damage to food and poisoning people. A fly trap can solve the problem of annoying insects.

What attracts flies

Before getting rid of flies, you need to understand what has become the source of their attention. They may be attracted to smells:

• sweet jam, honey, syrup;
• ripe fruits and vegetables;
• meat and fish;
• food waste in the form of scraps and peels;
• vanilla, cinnamon, sweet flavors and additives;
• manure and sewerage;
• spoiled food.

By getting rid of potential fly baits, you can avoid or significantly reduce their numbers in the home. But in some situations, the invasion of flies may be associated with the presence of a nearby source of their attention and it is impossible to influence it. Then it remains to trust the traps or special poisonous insect repellent.

On a note!

Insecticides are also naturally based and safe for humans. The line contains poisons based on pyrethrum.

Unlike pesticides and synthetic insecticides based on Thiamethoxam (, Aktara), safe traps can be used in close proximity to people and animals without fear for their health. The main principle of such a trap is to attract the fly to the bait and prevent it from leaving the trap. There are three types of traps:

1. Velcro - sheets of cardboard or tape covered with a sticky mixture that has a pleasant sweetish smell. Flies land on such baits and stick. Advantages of adhesive tape: easy to make and cheap to buy from a store, convenient to use anywhere, easy to clean up and dispose of along with stuck insects. The disadvantages include the unpleasant appearance of hanging traps in the room, the risk of hitting the head with a sticky bait suspended from the ceiling.
2. Trap traps with bait are made from improvised means. Insects fly into a certain compartment with a bait, but they cannot fly back. You can use jam, honey, sweet water, pieces of fruit or meat as bait. The advantages of this method of catching flies are the ease of manufacturing the product and its effectiveness. The disadvantages of homemade products include bad smell spoiled food that lures flies, and the potential for the container to be knocked over by curious pets or a child.
3. ... Devices requiring supplies in the form of an insecticide in a bottle or from a special plate with a poisonous substance. Plus: work without misfires. Minus: depending on the composition of the insecticide, it is sometimes necessary to ventilate the room after use.
4. Electric fly traps are special devices that run on electricity. They attract insects with ultraviolet light and heat, but when flies come into contact with a certain surface, they are killed by a discharge of current. Such a blow is not capable of injuring a person, but for small flying insects it is fatal. Other electronic traps work differently - they suck in closely flying insects. The advantages of the electric trap are its stylish appearance, additional source light in the dark, high efficiency, safety for others. The disadvantages include the high price of electric fly exterminators, power consumption, and bulky devices.
5. ... When connected to the network, they emit a sound inaudible to the human ear, which should make the flies stay away. Cons: does not always work; pets hearing ultrasound may be against it.

Homemade traps

A person often uses his ingenuity to achieve certain goals. The fight against insects was no exception. Annoying flies can irritate even the calmest person. To kill insects, especially enterprising people make homemade traps.

To make homemade products, you will need an ordinary plastic bottle 1 or 1.5 liters, scissors or a knife, any sweet filling, scotch tape.

1. The upper part is cut off from the bottle at a distance of 7-8 cm from the edge of the neck.
2. At the bottom of the resulting container, bait is placed: jam, honey, syrup.
3. The cut off funnel-shaped neck is pushed into the container with the neck down.
4. The wide edge of the funnel and the upper edge of the container are fixed with tape or electrical tape.

On a note!

The narrow edge of the neck should not touch the sweet filling. Flies should not reach the sweetness without flying into the bottle.

Such a fly trap from a plastic bottle can catch other sweet-tooth insects: wasps, bees, midges. Simple and affordable way making a trap allows you to throw it out with a large accumulation of insects inside and make a new one.

Glass flycatcher

You can make a fly trap from a regular glass or plastic cup and cling film. Put a teaspoon of honey or jam at the bottom of the glass. Cling film it is necessary to cover the cup and tighten it tightly, fixing the edges of the film with tape. Make 2-3 holes in the film so that the insect can penetrate into the glass. You can make several such homemade products and place them throughout the house.

Glass Jar Trap

In places where large flies congregate, you need a more serious bait - spoiled meat or fruits. They have a pungent strong smell and will attract more flying gnats.

1. A liter glass jar with a wide neck is taken as a container.
2. Several pieces of bait are put inside.
3. A wide funnel is installed on top with a narrow neck down.
4. The edges of the container and the wide edges of the funnel are fastened together with electrical tape or wide mounting tape for structural reliability.

On a note!

The strong smell of rotten vegetables, fruits or meat will be very unpleasant for household members and interesting for cats and dogs. Therefore, it is recommended to use such a flycatcher to catch flies on open verandas and place it in places inaccessible to animals.

Instead of a glass container, you can use a container made of dense plastic with a wide neck. The main condition for a reliable flycatcher is that there are no gaps between the funnel and the jar. Otherwise, flies can crawl out. These traps work well if you place them around the perimeter of the lot.

Duct tape

One of the most popular fly traps is sticky tape. It is sold in any hardware store and costs from 20 to 50 rubles apiece. But if it is not possible to purchase goods in the store, you can do it at home. To do this, mix 1 tablespoon of rosin with a tablespoon of castor or linseed oil... Heat the resulting mixture in a water bath and stir for 5 minutes. Then add jam and cool. Apply the adhesive mass to long strips of thick paper and hang in places where flies are often found.

If you follow the recipe, homemade glue remains sticky for a long time and is able to reliably hold insects attracted by the smell of jam on itself.

For people who do not have time to make homemade products, but want to quickly and efficiently get rid of flying gnats, there are electric fly traps. These devices are made of a metal housing with a fireproof plastic coating, and have several UV lamps, the bright light of which attracts insects. On the way to the lamps, the flies fall on the grid, through which the current flows, and immediately die. The conductive element is protected by an additional coarse mesh to prevent accidental contact with a person or pet. Such devices also help get rid of mosquitoes and midges.

Pest killer

Electric device for the destruction of flying insects. Two 20W ultraviolet lamps act as bait. Near the lamps passes metal gridconducting current. The trap is designed for flies and mosquitoes. For the correct functioning of the device it is necessary:

• set the trap on a flat surface;
• connect to AC power;
• make sure that moisture does not get on the device;
• periodically clean the dead insect tray.

The price of the device is about 3500 rubles. The device is durable and correct use will last for several years. The radius of the trap is up to 120 m 2. Power consumption 15 W. dimensions: 51x31.5x10.5 cm; weight 2.3 kg.

Well

Industrial electric traps are widely used in shops, warehouses, markets against flies, mosquitoes and other insects. The device is mounted on a wall 2 meters above the floor. The product includes ultraviolet lamps, the light of which attracts insects to itself. Flying close to the lamp, they fall on the conductive grid and die.

Main settings electric trap Well:

• area of \u200b\u200baction up to 50 sq. m .;
• weight 3.3 kg;
• dimensions: 34x28x13;
• lamp power 8 W;
• body material - plastic;
• power consumption - 25 W;
• the price is 6800 rubles.

Having noticed the flies, you should not immediately try to destroy them; it is better to follow the insects to find a problem spot in the house. Midges love wet, dirty places, and you need to carefully inspect possible problem areas in your home:

1. In the kitchen, it is worth inspecting the cabinets with stocks of cereals, homemade preparations, perhaps something has deteriorated, and this is where Drosophila started. Forgotten food waste, rotten fruits or vegetables attract gnats and they multiply rapidly.
2. Pay attention to plumbing, sewer drains, vents.
3. In living rooms, flies are most often chosen for living in aquariums with stagnant water, cages that contain pets.
4. Ground flies affect indoor flowers, you just have to overdo it with watering. Rotten particles form in the soil, and midges instantly settle here, affecting the roots of the plant.

Before taking drastic measures to combat domestic insects, it is necessary to clean the house to prevent further breeding of midges. It is necessary to remove all perishable food in the refrigerator, check the cabinets, rinse the shelves with soapy water, treat the water supply and sewer drains with special means.

Especially you should take care of your pets, a fish tank, and also check indoor flowers.

Advice: having found earthen midges, the plants are carefully examined, the damaged and rotten parts are cut off and the flower is transplanted into fresh soil.

A gnat trap will get rid of insects in the house

The prospect of using insecticides to kill insects in the home attracts few. Although these drugs are low-toxic, if there are small children, animals with allergic diseases in the house, then it is better to refuse their use. Safe methods are worth trying and the midge trap works quite well.

Advice: you can buy commercial traps, for example, "Raptor" with a liquid-bait that attracts insects, they get to the area covered with a sticky substance, where they die.

Often there is no opportunity to purchase a ready-made device, then it is better to make a trap for midges with your own hands, which will help get rid of uninvited guests... Available home remedies can be used to make it.

Here are five ways to make simple fixtures yourself: