Fruit fly trap. How to make a fly trap with your own hands: the best designs. An effective trap for wasps and flies

There is so much chemistry in our life that once again we do not want to use toxic drugs, especially if there is a harmless alternative. A popular life hack is a do-it-yourself fly trap. A simple device abounds in many modifications, it is made in 5 minutes from improvised materials, most importantly, it quickly and in large quantities “catches” annoying and unceremonious insects. So, at least, those who use homemade flycatchers say. What, in fact, let's try to impartially figure it out,

What do you need to know about flies in order to trap them?

So that a DIY fly trap does not turn out to be a waste of time, it is advisable to know the basic habits and instincts of insects. Only in this case it will be possible to outwit them, lure and destroy them. A bit from the life of flies, point by point.

1. The senseless, as we think, flying around the room, is in fact a constant search for food. She will definitely bite into an edible bait, the main thing is to guess with taste and smell.
2. Meat has a hypnotic power over the gluttonous insect, especially "with a smell". The category of favorite products also includes jam, honey, sweet overripe fruits.
3. The second direction of the constant search for flies is where to reproduce offspring. The best place for egg-laying in a living room - spoiled food, decomposing debris, feces. Given the insect's delicate sense of smell, this factor must be taken into account when choosing a place where to set traps.
4. Most are familiar with the situation how difficult it is to catch a fly in a room. It is difficult to take an insect by surprise, because due to the special structure of the eye, it perceives the slightest flicker, has an angle of view of 180⁰. But he calmly sits where his relatives already exist, for example, on sticky tape.

It is interesting! To understand how developed the sense of smell is in flies, Swiss scientists conducted an experiment, luring them into the aroma of various products. It turned out that the maximum distance from which flies distinguish the smell of meat is 3 km.

Types of the simplest traps

All the variety of homemade flycatchers can be conditionally combined into 3 groups.

• With edible bait, when an insect enters a confined space, but does not die, but simply cannot get out.
• With poisonous bait. The fly dies after eating "sweet".
• Sticky Flycatchers. Stuck in a sticky substance, the insect dies of hunger.

There are craftsmen who make homemade "stun guns" for flies, but this device can hardly be made without having certain professional skills.

From a plastic bottle

A primitive fly trap is easiest to make from an ordinary plastic bottle... The essence of the device is that the design assumes the movement of the insect in only one direction - inside the container. There is no going back. And to make the fly want to penetrate there, they prepare a bait with an attractive smell.

The bottle must be cut in half. The lower part is a container for bait. The upper inverted half is a funnel through the narrow neck of which the insect enters the trap. The ratio of the height of the bottom and top is 2: 1, the funnel must be tightly secured with tape or a stapler.

Advice! The funnel itself should not come into contact with the bait, contain drops of sweet liquid, other food, otherwise the insect will have no need to climb inside, it will "dine" on approach.

How do you catch and direct a fly into a trap in a specific part of the room? For this, the following compositions are used.

• Sweet liquid - rare jam, sugar syrup, honey, Coca-Cola.
• Fermented liquid. It is easy to get if you add a drop of dry yeast to the sweet filler.
• Flies fly well for red wine and beer.
• If you add ground pepper (black) or a granular insecticide, such as Agita, to a sweet liquid, insects will not only fall into a trap, but also die.

Advice! It is best to use meat or fish as bait outdoors. Flies and I have different ideas about pleasant smells - what they like irritates our sense of smell.

The final touch is that traps are placed in the most attractive places for insects. On the windowsills - flies strive for the light, kitchen table, next to the trash can, toilet.

From a glass jar

A fly trap can be made with your own hands from a glass jar and a funnel. suitable size.

Overripe fruits of sweet taste - apples, banana, peaches, apricots - are placed on the bottom of the dish. It's good if they start to rot and ferment. Instead of a lid, a funnel is inserted, securely fixed so that there are no gaps between it and the wall of the can - the trap is wrapped around the circumference of the neck with tape, tape.

From a plastic container

To make a neat little flycatcher, take any transparent container - a glass, a plastic container. Put a little honey, sweet fruits, jam at the bottom, cover cling film, in which 1–3 small holes are made. The principle of operation of the device is the same as described above.

Advice! When using a home-made trap, do not forget to dispose of the trapped insects from time to time, wash the container, and update the bait. Prevent the flycatcher from becoming a source of unsanitary conditions.

Duct tape

Another type of DIY fly trap is homemade duct tape. Numerous videos on how to make a gooey substance from honey and sugar do not hold water. Such a coating will dry quickly, God forbid, if you can catch several insects. To get Velcro similar to the purchased one, use the following composition.

• 2 parts pine resin (rosin) melted in a burner or water bath;
• 1 part castor or flaxseed oil
• a little ("for taste") honey, sugar syrup.

The result is a truly sticky substance that retains a viscous consistency for a long time. The ribbons are cut from durable kraft paper, parchment, oilcloth.

Advice! If you have ALT glue that is used to control small rodents, you can use it for sticky tape.

Homemade traps: pros and cons

Having considered how you can make a fly trap from a plastic bottle or other transparent container, we will analyze whether the device is worth the time spent.

Arguments for":

• safe, environmentally friendly device;
• easy and quick to do;
• available materials;
• several flies fall into the trap per day;
• no need to pay money.

Cons of a homemade device:

• does not give a 100% guarantee of the destruction of insects;
• does not always look aesthetically pleasing;

Output. There are still more pluses. It definitely works if there are few flies. It's worth the candle if other options (fumigator, insecticides) are unavailable for some reason.

We wouldn't bother with homemade sticky tape unless absolutely necessary. It is inexpensive, in addition, the purchased analog has an undeniable advantage - an attractant is a part of the sticky substance - a pheromone that attracts insects.

Bottle Insect Trap:

How to make an insect trap? This question is asked by all summer residents and residents of private houses. Wasps, flies, mosquitoes begin to precipitate a person on hot summer days, especially in July and August. At this time, young offspring appear, which need a lot of food. Therefore, males and females scurry in search of food. They fly for food, especially for sweets and meat. Mosquitoes annoy with painful bites.

Many people are allergic to wasp stings. Therefore, people have to apply many methods of insect control. The bites of these insects are very unpleasant, especially for children. Sometimes you have to call ambulanceto avoid suffocation due to allergic reaction. The easiest way to get rid of wasps. You can try to find the nest and destroy it. But wasps fly around the site. Mosquitoes can crawl into every crevice of the house, just like flies. Therefore, you need to know how to make a trap at home.

An effective trap for wasps and flies

There is a very effective device that has been tested by many site owners. To make it, you need a plastic bottle of 1.5 or 2 liters. The cover must be removed from it. The bottle must be cut into two pieces. In this case, the upper part should be half the size of the bottom. You will need to put liquid bait inside. So that it does not spill, you need to place the upper part in the lower part with the neck inward. At this point, the trap can be considered ready.

Any sweet liquid can be used as bait. But it is best to take fermented compote, as it has a sharper smell. This completes the instructions on how to make a trap. Insects will fly to the smell and get inside, but they will not get out. Trying to crawl along the walls of the bottle, a wasp or fly ends up in a dead end, which is formed due to the upper neck. It is better to make several such baits. They should also be reinforced in case of strong winds.

What bait is better to take

Flies are different, therefore, certain baits should be used for them. Houseflies and similar species like sweets the most. Large species are practically not interested in sugar, so it is better for them to put fresh meat or fish in the bait. Fruit flies may only be interested in fruit, juice, or compote. Wasps love sugary sweets most of all, such as honey. Unfortunately, such traps will not help against mosquitoes.

Such devices are very effective. But there is a certain species - fruit flies, which rarely fly into the can. The way to make a trap for them will be discussed below. The funnel trap is not suitable for household use. It's all about unpleasant odor, which begins to emanate from the bait after a few days. But if you change it more often, then the trap is quite suitable for rooms.

DIY fly tape

The most common way to get rid of flies is with Velcro tape. These are sold at every hardware store. Flies readily sit on the tape, since it has glue applied to it, which contains a bait. The insect cannot fly away from such a device. The tape works for a while, but then the glue dries up. This device has many advantages. It is affordable, harmless to humans. The tape does not smell, does not emit toxic substances.

How to make this type of fly trap? Many people think that this is impossible. But in reality, you can make a tape quickly. To do this, you need to take linseed or castor oil, resin or rosin. You need to take glycerin, honey or sugar as bait. Melt all the ingredients in a water bath and apply them to paper tape. It will turn out to be an excellent analogue of a store device. This kind of tape is suitable for catching fruit flies, as they like to land on the surface.

Readers now know how to make a wasp and fly trap. Surely many are also interested in what goals the insect pursues. If bees live to make honey, then flies and wasps pursue completely different goals. They try to lay as many eggs as possible. One fly manages to reproduce up to 2000 larvae. Moreover, they live only a couple of months, and sometimes up to two weeks. The fly lays about 120 eggs per clutch.

A cesspool, compost heap, and even soil in a flower pot are best suited for this. The fly will appear in a couple of weeks. Moreover, the warmer the ambient temperature, the faster the larva matures. In winter, the flies sleep. An active life begins only when the total daily temperature is +20 degrees. There is one more interesting fact... Surely, many are interested not only in how to make a trap at home, but also in why flies are always sitting on the windows. They just have compound eyes, because they simply do not notice transparent objects.

Why flies are dangerous

Insects, in particular flies, are carriers of many diseases. Therefore, it is important to get rid of them in time. If wasps are dangerous because of bites, then flies can cause not only food poisoning, but also the most dangerous diseases. Some of them are typhoid, fever, cholera, dysentery, brucellosis, etc.

Unusual but easy way to get rid of flies and wasps

Not everyone knows how to make a trap with your own hands using a fly agaric. Surely no one thought about the origin of the name of this mushroom. It is necessary to collect fly agarics in August. A few hats will be enough. They should be crumbled in disposable tableware and cover with sweet water. A plate of mushrooms should be placed in the garden or in another place where insects gather. Wasps and flies will react immediately to the bait. You don't even have to chop up the fly agarics, but simply sprinkle the caps with sugar. A syrup is formed on the surface, to which insects will stick.

How to get rid of mosquitoes

For mosquito control, you can make a regular sippy trap, but there is also a better tool. It is worth trying to make an electromechanical device. To create it, you need several materials at hand. The main component of the trap is the electric motor. Thanks to him, the trap has a suction effect. It pulls mosquitoes into a special container from which they cannot get out.

How do you make this type of mosquito trap? Everything is very simple. The power supply is based on direct current. A regular cooler can become a fan for the device, only, preferably, large. You can take a plastic bucket from mayonnaise as the basis of the case. In the bottom of the can you need to make a hole equal in diameter to the dimensions of the cooler. The fan is usually sold with screws. They can be used to screw the device to the bottom of the bucket. The cooler is attached outside, not inside.

Trap bait

A suitable bait will be a light bulb with a bayonet base, as well as a holder for it. The surrounding air will heat up and illuminate the space at the same time. Everyone knows that light is the main bait for insects. Instead of a light bulb, you can use LEDs. Moreover, it is more economical to buy them in the tape, and not separately. In addition to light, you will need another bait. Komarov will be interested in carbon dioxide, for which you need to dilute the same amount of sugar and 5 g of yeast in 0.5 cups of water. The bait should be added to the container to be attached to the trap body.

These are the easy but effective methods for dealing with flying insects. They are much safer than aerosols and others chemical substances... So it's better to spend some time on self-production traps than spending money on other insect control methods.

The same methods are used to combat them.

First of all, it is necessary to find the source of their distribution and get rid of it, most often these are stored at room temperature fruits or vegetables, and garbage bag.

If there is no effect for several days, it is necessary to use certain techniques:

1. clean the whole apartment;
2. get rid of food debris, regularly wash animal plates, wash the trash bin, rub kitchen cabinets thoroughly using an alkaline solution;
3. turn on the insect fumigator;
4. spread the sticky tape with fruit juice and use for its intended purpose;
5. lean the mosquito plate against the window, when heated, they will destroy pests;
6. collect insects with a vacuum cleaner from the source from the distribution, immediately take the bag of garbage out into the street;
7. process sewer drains chemical means, pour soda into the drain first, then vinegar, after the reaction is complete, turn on the water and clean the drain.

When living near the garbage dump, it is necessary to hang a net on the windows through which insects cannot penetrate into the room.

Traps

On sale you can find ready-made fly traps, they are highly efficient, major manufacturers: Aeroxon, Raptor... The principle of their action is that insects flock to the smell of liquid and stick to the inside of the structure, externally the trap remains clean.

There are also natural trap flowers, for which insects serve as food, they are absolutely safe for humans, do not differ large size and do not require special care. The process of closing and opening a flower during prey capture is also very interesting to observe.

DIY traps

The simplest method of getting rid of midges is considered to be an empty bottle with a fairly narrow neck, where you need to pour a little mixture of fruit juice with soapy water.

1. The solution should be poured into several jars with a wide neck, placed in places where insects accumulate.
2. Drosophila will fly to the odor exuded by the solution, but when it gets into the container, they will not be able to get out of it due to the lack of a film on the water surface.
3. The solution must be topped up as it dries.

This simple technique allows you to get rid of pests, but it takes more time.

There is a high probability that the insects have already laid the larvae in a secluded place, the process of getting rid of them can take a week.

It should be borne in mind that midges can appear even as a result of a piece of apple accidentally left on the table.

The principle of operation is the same, but in this case you only need kvass, juice, or rotten pieces of fruits, vegetables or fruits... Can be used as a container old mug or glass jar.

1. 1/4 of the container must be filled with bait;
2. the inlet must be closed with a paper funnel;
3. flies should fly in from the wide end, but they will no longer be able to find a narrow hole.

If midges appeared at the end of summer, they will help get rid of them. watermelon or melon.

1. Fruit slices must be placed in a bulky bag and left in the kitchen overnight.
2. The bag must be free of holes, but must be open to allow insects to enter.
3. In the morning, close it with a sharp movement and take it to the trash.
4. If, after that, midges start flying in the kitchen again, then the insects have laid the larvae, from which new individuals have hatched.

Drosophila in houseplants

Quite often, fruit flies curl around flower pots, they are attracted by rotting leaves and wet soil... Sometimes the reason for the spread of midges is soil contaminated in the store, if there are such doubts the soil must be kept in the oven before use.

Plant not recommended to transfuse, fallen flowers and leaves must be thrown away. A match will also help to reduce the number of insects, which must be stuck into the soil with a painted end. If midges are found in a pot of flowers, it is also recommended to water the plant with an insecticide harmless to it, the action of the drug is primarily aimed at destroying midges and their larvae.

Dichlorvos is considered the most extreme measure of getting rid of midges; it is not recommended to stay indoors during the disinfection period.

Traditional methods

Over the years, the people have also figured out how to deal with fruit flies. Fighting with these methods is not difficult, but at the same time very effective.

• fern leaves, elderberry and tansy spread out in all rooms, midges will fly away due to an unpleasant smell for them;

Tansy is prohibited for use with weak cerebral vessels; it can cause headaches in patients.

• kerosene, turpentine - it is recommended to add it to water when cleaning floors or windows;
• tomato seedlings, eucalyptus, geranium - flies will fly away due to an unpleasant smell;
• laurel oil - it is recommended to use it for rubbing window frames and jambs.

- an insect that, under favorable conditions, is capable of rapid reproduction and development. About how long fruit flies live and what kind of them - read on our website.

Prevention

In order to prevent the appearance of mold and rot, it is necessary to check the food stored outside the refrigerator at least once a week. The breeding rate of fruit flies is very high, if the focus of their distribution is not eliminated in time, their number will rapidly increase.

It is also necessary to dispose of garbage in a timely manner, do not leave vegetables and fruits outside the refrigerator for a long time.

Drosophila most often occurs near decaying products, especially a lot of them can be found in the kitchen, big problems can arise if the house is located near the trash can. To get rid of them, it is recommended to use traps that you can make yourself.

It is very important to keep the room clean, throw away the trash regularly, and do not leave food for a long time at room temperature. In extreme cases, you can use dichlorvos, if midges are bred in plants, they must be treated with insecticides. Compliance with these rules is the answer to the question of how to remove Drosophila flies once and for all.

If you find an error, please select a piece of text and press Ctrl + Enter.

- one of the most annoying insects that fly into the room from the street.

Fly flying around the apartment

In constant search of food, they circle the room, emitting an annoying buzz.

If it was not at hand to catch these flying insects, you can assemble it yourself from improvised means. Moreover, it will work no worse than a professional one.

Forbidding sign with a fly

How to make a fly trap yourself - best designs?

How do you make a fly trap to actually work?

For this, it is important to be familiar with the habits, instincts of flying insects.

1. Flies are in constant motion as they search for food. The insect will definitely react to the prepared tasty bait. As such, honey, overripe fruits, jam are used.
2. Meat is of particular interest to flies, especially if it is not the first freshness.
3. To organize the masonry, flies use deteriorated products, decomposing garbage. Given the presence of a good sense of smell, the device should be placed in places attractive to them.
4. It is very difficult to catch a fly, since it has a wide-angle view and sees every flash well. But at the same time she safely sits on the surface, which has already attracted her relatives.

Conditionally homemade flycatchers can be divided into three groups:

• filled with edible bait;
• filled with poisons;
• sticky.

It is possible to collect a trap from available means in a short time.

Plastic bottle

Before starting work, you need to prepare everything you need.

1. plastic bottle with a volume of 1.5 liters;
2. granulated sugar;
3. overripe banana.

• Measure from the bottom of the bottle about 2/3 of the height, draw a line. Then, using a sharp knife or scissors, cut the bottle into two parts: a large one and a smaller one. As a result, you should get a kind of tall glass, a small funnel with a neck.
• Pour 1 tablespoon at the bottom of a large part of the bottle. granulated sugar so that it completely covers the entire surface.
• Peel the banana, cut it into small pieces. The fruit must be fully ripe, overripe. Greenish bananas don't work.
• Place the banana slices on granulated sugar and mash to form a fruit puree. The sweetness will be an excellent bait for flies that prefer to feed on organic matter that has begun to deteriorate.
• After making the puree, pour warm water into the bottle, stir the mixture. The liquid should rise above the bottom of the bottle by about 3.5 - 4 cm. The combination of granulated sugar and warm water will accelerate the onset of fermentation, which will make this fly bait very attractive.
• Twist the cap off the second, smaller part of the bottle. Now lower it with its neck down into a plastic glass with sweet bait, but so as not to touch the banana mass.

The bottle fly trap is ready to use.

Visual instructions for making a trap

You can use it for a week. The principle of operation is as follows: a fly, attracted by the smell of a fermenting banana mixture, crawls down to a narrow neck, goes down. The insect will not be able to get back.

If the device is slightly improved by wrapping it in paper, then it will attract mosquitoes.

The following composition is used as a filling sweet bait:

1. any sweet liquid - jam diluted with water, sugar or honey syrup, cola;
2. fermented liquid - for this, a few granules of dry yeast must be added to the prepared sweet filling.

Poisonous filler can be formulated if desired.

Ready fly trap

To do this, add (optionally) black ground pepper or granules of any insecticide, in particular, Agita, to the sweet content. Then the insects will not only be caught, but also die.

Metal can

A flycatcher can be made from a regular can, for example, in which was laid dog food.

• Wash the container, remove the label from it, dry the jar.
• Take scotch tape, cut a few pieces. It can be replaced with insulating tape. The pieces should be long enough to wrap around the prepared jar. Do not touch the sticky part. Otherwise, the trap will not work.
• Wrap the jar with duct tape, sticky side down. Rub it all around with your fingers to keep the sticky layer on the metal.
• Remove the tape. If the surface of the can does not stick well, then repeat the operation.
• Glue a flashlight with ultraviolet light to the lid of the can, place it inside.

Place the jar on a flat surface, turn on the light. Flies will fly into the light, stick to the walls of the can.

Metal can as a fly trap

The trap, when it stops working, is disposed of, after taking out a flashlight.

A do-it-yourself fly trap for fruit flies looks simple:

1. To the bottom of the glass plastic container put a sweet bait.
2. Close the container with cling film, make several holes in it. Secure the film with adhesive tape to hold it.

Drosophila, reacting to a sweet smell, fall into a trap.

Sticky paper

If you want, you can make a flypaper.

• You need a large paper bag from which you want to cut the strips. Size: 2.5 cm width / 15 cm length. You will need about five to six strips.
• Spread the tapes out on a horizontal surface. Take scissors, make one hole in the surface of the tape at a distance of 2.5 cm from the end. A hole punch can be used for this operation.
• Cut the strings 15 to 20 cm long. You can use a thin string. There should be as many ropes as there are paper ribbons prepared.
• Thread the ropes into the holes, tie the knots so that they do not fall out.
• Mix granulated sugar, honey, water in equal proportions. Mix well and boil the sweet syrup. Allow the mixture to cool to room temperature.
• Dip the prepared paper strip into the sticky composition so that they are saturated with syrup. Then lay the blanks on the surface of the parchment so that they can dry out.
• Hang the strips in the selected places. To increase efficiency, the strips need to be hung in one place, i.e. group.

After the flies stop sticking to the surface of the strips, the traps must be thrown out. There is very little sticky syrup left on them and paper is no longer dangerous for insects.

Sticky Fly Traps

To resume the effect, re-wet the paper ribbons with sweet syrup.

Conclusion

Using homemade traps, it is necessary to dispose of them periodically, disinfect the container, and update the bait.

Video: Making a sticky fly trap at home

Flies are not just annoying insects, they are carriers of dangerous infections. In the warm season, they get inside when you open doors, through windows and vents. A fly trap from a plastic bottle, tin or glass can, as well as self-made devices under tension and sticky tapes, will help in the fight against them.

Features of homemade fly traps

Homemade gadgets show good results when used to kill flies. Insects begin to besiege humans during the hot summer months, especially in July and August, when new offspring appear.

Traps fight the infestation of flies. Feature homemade devices - attraction of insects by smell. Flies arrive at the delicious aroma, but they cannot fly away and die of hunger.

A homemade flycatcher does not require special expensive parts. You can invent it from simple tools that are often sent to the trash. Some elements will need to be purchased, but their cost is negligible compared to purchased flycatchers.

Homemade invention - the best way, because it immediately kills several hundred pests, does not require physical activity, works silently and does not harm the human body, unlike chemicals and poisons.

Attention! A homemade fly trap in the country and in the apartment will not give a 100% guarantee of destruction.

Warnings:

1. When disinfecting, use means that are safe for people.
2. If you spot wasps or other insects, buy a spray and spray on the trap before approaching it.
3. Place homemade models away from flowers and dining tables.

How to make a flytrap with your own hands

Homemade traps are a great alternative to industrial devices. It will take a minimum of time and tools to fight insects. Traps are made quickly.

The advantage of such devices is that they do not contain chemicals and do not pose a serious threat to human health.

How to make a flytrap from a plastic bottle with your own hands

For manufacturing, you will need a plastic bottle or eggplant, scissors, a knife, sugar, honey or banana, dry yeast, water.

Step-by-step instruction:

1. Divide the bottle into 3 parts. Cut off the top.
2. Pour sugar at the bottom so that it completely covers all the bumps.
3. Add water, honey and yeast. Mix. If using banana, but cut into small pieces or mash with a fork. The mass should be homogeneous. The bait is rotten fruit, a piece of meat with a smell, or other product that emits a strong aroma.
4. Place the upper part of the bottle with the neck down, after removing the cap.

Advice! Leave a distance between the neck and the sweet bait. The flies fly in and cannot fly out.

In about a week, the bottle flytrap will be filled with insects

Do not shake the flies out of the trap, discard the plastic bottle. Make another trap. No need to try to knock out insects. They stuck to the walls and sugar, and even more so to tear them off by hand, this is not hygienic.

How to make a flytrap with your own hands can be seen in the following video:

How to DIY a glass jar fly trap

To make a flycatcher, you need a glass jar and a funnel of a suitable size. The latter can be made from a plastic bottle.

Place nuts or peanut butter in the bottom of the glass jar. Attracts flies well apple vinegar, to which the dishwashing detergent is added. Otherwise, insects can drink it while standing on the surface of the liquid. Overripe fruits, which begin to rot and ferment, work great.

Then a funnel is inserted inside, which should be fixed. There should be no gaps between it and the walls of the glass jar.

Around the circumference, you can wrap with tape or duct tape

The second option is to finish making effective trap for flies using cling film. Wrap the neck tightly around it. The film should hold, not slip. Can be secured with a rubber band or wrapped around with tape.

Make a few holes in the middle of the film so that the flies can fly in. Outside, they will not be able to fly out, since it will not be possible to find holes. In addition, the flies will not want to leave the container.

When the trap is full of enough insects, it should be taken to the bathroom. Turn on hot water in the sink, close the drain hole and the holes in the film. When there is enough water, put a jar in it and leave for 10 minutes. The flies will die from the hot temperature. The rest can be drowned.

Throw away flies with the contents of the glass jar. To make a new trap, the jar will have to be disinfected or treated with safe chemicals.

How to DIY a fly trap from a metal can

For homemade device Any tall metal can will do. For example, from soda, stew, dog food. Scotch tape or any sticky tape will do. You can take double-sided tape.

Important! The container for making the trap must be rinsed and dried. Remove the label. The shiny color will attract flies.

1. Wrap a metal can with adhesive tape. If using scotch tape, wrap it up with the sticky side down without touching it. Otherwise, you won't be able to make a fly trap.
2. Rub the tape around the entire circumference with your fingers so that it adheres well to the metal.
3. Remove the adhesive tape. If the surface of the metal can does not stick well, repeat the procedure.
4. A sweet bait will help attract flies to the trap. The top is covered with cling film, as is the case with glass jar... Make a hole.

The flies will fly on the smell and stay inside, some of the insects will stick to the outer walls.

When enough fruit flies have gathered outside and inside, the trap is disposed of, it cannot be reused.

A glass trap is made in the same way. It is placed on a flat surface, and jam is put inside. For large individuals, this trap model will not work.

How to make an electric fly trap with your own hands

A homemade automatic fly trap is not as effective at repelling insects as other devices, but is more environmentally friendly. How it works - The light from an incandescent lamp lures flies, which they can reach through a wire mesh connected to a high voltage. A flycatcher, a stun gun with its own hands, exposes an insect to an electrical discharge, as a result of which it dies.

You will need to buy the following elements - a regulator for adjusting the required voltage (a dimer is suitable), an automobile ignition coil or another, a double grid and a lamp for attracting.

The ignition coil without assistance will not be able to generate the high voltage that it could; beams of current no more than 14 watts are fed to its input. To do this, you need a thyristor voltage regulator, which cuts off some part of each half-cycle of the alternating current, the pulse duration becomes less or longer. The frequency remains the same.

Plugs in from 220 W socket

The design of the thyristor regulator will not allow direct connection to the ignition coil, because it can vary the voltage from about 220 W and above, this is too much for the ignition coil. For this, a capacitor is connected in series with the regulator.

Next, the voltage goes to the common wire of the ignition coil - B, and the left terminal, marked with the letter K. High voltage removed from the common wire and from the central high-voltage output. The wires are fed to the mesh.

By adjusting the voltage of the variable resistor, a moment is selected at which a spark does not begin to slip between the grids. Shocks even without a visible arc.

To build the mesh, you will need 2 pieces of chipboard, in which you will need to drill 4 holes in the corners and punch 6 mm diameter studs through the pieces of chipboard. The wire is wound in a circle around the perimeter of the entire structure. Then drill 4 more holes, but at a distance closer to the edge.

Attention! Before making holes for the inner mesh, you should take this into account, leaving a stock of holes for the outer one.

Use the wire without insulation. Inside the chipboard, make a hole for the lamp so that it passes freely through it.

How to DIY a sticky fly trap

The main thing in the flycatcher is a sticky and viscous substance that will not allow the insect to escape to freedom. To prepare a fly trap, you will need rosin, castor oil, a thin soft cloth and two sushi sticks, a metal container for boiling the mixture, and a mini-burner. Any oil can be used, but then the Velcro will have to be changed more often.

1. Put rosin (2 parts) in a container, place on a mini-burner. When the mixture boils, hold for a minute.
2. Add oil (1 part), then heat for 60 seconds.
3. Leave the mixture to cool. After 20 minutes, it will thicken if the proportions are right.
4. Slip the material between the stapled sushi sticks. Wrap the strip several times to fix the fabric.
5. Apply the prepared glue evenly to the material.
6. Twist the cloth with chopsticks to smear the back as well. If excess appears at the edges, remove.

It is necessary to change the trap when there is no free space on the adhesive tape, or new flies will be able to free themselves

Hang the finished Velcro in the place of local accumulation of flies. Attach the trap to a clothespin or attach it to the ceiling with a button.

How to DIY an Australian Flycatcher

This is the best trap for flies, falling into which they die from dehydration. Australian device homemade type - the most high-tech solution without the use of chemicals.

Step-by-step instructions for making a trap:

1. Take a timber of the required size. The optimal one is 40 by 40 mm.
2. Make grooves for installing the mesh. Set the saw depth to 12 mm, clamp the bar and make cuts. Repeat the process on the other face, so that they are at an angle of 90 ° C. Connect the frame so that homemade trap there were legs.
3. Make a pyramidal bottom. Give the process maximum attention. Cut the mesh into 4 triangles, turn the model over and screw them to the bars so that the pyramid is inside the body.
4. Make a hole at the top so that the flies can enter, but cannot escape. Close the rest of the sides with a dense mesh. Make the top of the box a lid so that it closes tightly.
5. Put the bait inside.

You can set the trap on your lawn or in your home. It is recommended to make the bait yourself or buy it at a household goods store.

A huge number of flies will gather in the trap in a week.

How to DIY a Window Fly Trap

Such a device is made like an adhesive tape. Only the glue is applied to one side of the fabric. With the sticky part, the glue window fly trap is turned away from the window. You can attach fabric with a hot gun or use buttons for old frames.

For the second method of making a window fly trap, you will need cardboard packaging or a rectangular-type metal container. The width should match the corner of the window.

Cut the container at an angle, leave the partition at the bottom. Treat the inner part with adhesive.

Caught insects remain inside, the product should be changed as flies stick

How to make your own outdoor fly trap

In the summertime, it is impossible to sit outside on a warm evening. The flies literally gather in a swarm and bite. They fly into the light. For the outdoors, you can make a trap from a plastic bottle with sunflower oil or other bait.

Cut off the top of the container along the edge, put something inside that will attract flies. Use a sharp object to make two holes on the sides of the neck, thread the rope. Remove the lid, insert the top into the bottom of the plastic bottle, secure the structure with tape or electrical tape. Hang your homemade trap under the lamp.

Attention! Such a device will also attract mosquitoes. Once inside, they cannot get out.

Outdoor trap options

You can put the product near your home, next to an outdoor toilet, chicken coop or barn. If natural baits are used, they are placed near the resting place.

How to DIY a Fly Trap with an UV Flashlight

A more complex device with an ultraviolet flashlight attracts insects better. For manufacturing, you will need a tin can, scotch tape or electrical tape.

Wash the jar and dry it in the sun so that the glue remains on the outer surface. Stick the adhesive tape on the outer surface, put in a warm place for an hour. Glue the flashlight inside with hot glue. Remove the tape. Turn on the flashlight.

Advice! You don't have to buy a flashlight to make a trap. A small UV light keyring is enough.

The light will attract flies, which on the way to it will stick to the sticky side of the can, this design works more efficiently at night

The second way to make a homemade trap with an ultraviolet flashlight:

1. Take a plastic container with a tight-fitting lid.
2. Make a hole in the bottom. Skip the fabric, tie a knot so that it does not go through the hole. The fabric on the other side will be attached to the ceiling with a button.
3. Make many holes in the container. Glue the plastic jar with tape, leave for a while. Remove the adhesive tape, the glue should remain on the surface.
4. Put inside ultraviolet flashlight, include. The light will pass through many holes, attracting flies, which, trying to crawl through the small holes, stick to the surface of the container.

How to improve the effectiveness of traps

The likelihood of insect extinction quickly increases with several types of traps. To catch more flies, it is recommended that you make some homemade gadgets and place them at different ends of the apartment or garden.

Attention! The flies should not be able to intercept a piece of food outside the trap.

The efficiency of crafts will be higher if you remove all food in the apartment, take out the trash. All food should be refrigerated. Especially berries.

Dionaeus flower will help to increase the effectiveness of traps. It is not whimsical to care for, it can be planted in the garden near the resting place or kept in the house. This is a predator flower, it eats insects.

Conclusion

A plastic bottle fly trap is the simplest, it can be quickly made. At the same time, in terms of efficiency, it is not inferior to industrial devices. All the proposed models of traps can be used to combat other insects - wasps, hornets, mosquitoes.