How to choose the best front door to a private house. Which front door to put in a private house Types of front doors for a private house

Entrance doors are a kind of bastion, which should reliably protect their owners from unauthorized entry, as well as provide full-fledged temperature and humidity conditions in the house. A good door panel prevents cold air from entering from outside, but sometimes even professionally installed structures freeze up. What exactly should be the front door in a private house so that it does not freeze even in severe frost, and you will learn how to solve problems of this kind from our article.

What is the essence of the problem?

In your private house, the entrance Iron door freezes through. This is a very unpleasant situation, but, unfortunately, very common. Of course, there is no point in panicking in this situation, but you should not let the problem take its course.

Why does the front door in a private house freeze through? There are a number of explanations for this:

1. Sharp temperature jump. When there are frosts on the street, and heating devices are functioning with might and main in the house, then in the end we get a huge difference between temperature conditions from the outside of the door panel and the inside. From the side of the room on the door, due to a sharp temperature drop, drops form and, cooling down, they freeze.

Condensation in a significant amount - the cause of freezing

1. High thermal conductivity facing material. Doors made of metal cool down quickly, thus becoming a source of cold. And due to the same condensate, it is converted into drops, which, accordingly, become frost.
2. The presence of one door in front of the exit to the street. If the door leaf is in full contact with outdoor weather conditions, then sooner or later, there will be a freezing problem.
3. Subsidence or absence insulation material in the panel. High-quality samples must be insulated, but, unfortunately, not all models of such structures are equipped with heat-insulating layers. If low-quality “consumables” are used, then after a while they lose their performance and cease to perform their functions.

Insulation should be placed in separate sectors, in which case its subsidence or wrinkling is excluded

Much depends on the quality of the insulation itself. If work on the insulation of the front door is carried out independently, choose a heater famous brands with quality certificate.

An example of high-quality (left) and low-quality (right) insulation

1. The presence of gaps on the door panel. Defects of this kind may remain after the installation of the product or occur during the operation of the structure. Cold air masses pass through the cracks. Moreover, precipitation can enter through such defective places.
2. Poor sealing of butt joints. The rubberized sealing cuff, which is pasted over the entire perimeter of the loot, provides protection from drafts and frost, but after a while this element falls into disrepair and loses its performance characteristics. In addition, far from always people install a sealant.

In addition, often the metal front door in a private house freezes due to deformation of the component parts of the opening. Due to prolonged use or improper handling, the elements of the opening can be deformed, which, in turn, leads to the formation of all the same cracks and gaps.

Often freezing door leaf is due to its thin walls. It is an insignificant barrier to the path of cold air masses. Ennobling your home with a metal door, be extremely attentive to its filling. An unprepared door panel is not able to withstand the harsh winter frosts and will be bound to frost. And there is no getting away from this, any model of domestic doors will sooner or later begin to freeze.

The main reason why the front door in a private house freezes through is too thin construction. The thinner the sheets from which the panel is made, the more it will be covered with frost.

VIDEO: Condensation on the front doors. Causes of occurrence. Elimination Methods

What is the danger of freezing the door leaf?

Most people who are faced with such a problem prefer to let things take their course and wait for the long-awaited warming. But at the same time, such a nuisance should be resolved immediately, since freezing can lead to other equally pleasant situations:

• loss of thermal energy, which can lead not only to discomfort, but also to the development of colds;
• the presence of frost on the door leaf leads to cracking of the outer panel, which in turn significantly reduces the life of the structure;
• if you do not deal with freezing, then because of this phenomenon, the lining will begin to deteriorate;
• the course of such a process causes the presence of frost on the slopes of the front door, which also quickly brings them into disrepair;
• violation of the full functioning of the locking mechanism, as well as handles;
• Excessive humidity in the room leads to the development of mold and mildew.

In addition, the frozen door leaf undergoes deformation during use. Even in warmer times of the year, the door will continue to seep through, and over time it will simply stop closing.

As soon as freezing of the front door is detected, it must be removed and insulated at the first warm windows. Even one very cold winter enough to have to change the entire block in the spring.

How to prevent freezing

When frost is found on the door panel, it is necessary to make every effort to solve the problem as soon as possible. Qualified specialists offer three options to remedy this problem.

Checking the insulation

At the first sign of freezing, check the insulation

If the front door freezes through, then the problem may lie precisely in this. Either you became a victim of fraud and you were given a sample that was not equipped with an insulating layer, or the heat insulator turned out to be of poor quality and eventually settled in the canvas or crumbled. According to statistics, 9 doors out of 10 freeze through precisely because of the lack of insulation material or its poor quality.

In this case, you need to remove the inner decorative leaf or upholstery and check the condition of the insulation. If it is not there or it has become unusable, then you need to replace it with a new one. Styrofoam, polystyrene acts as a good heat insulator, mineral wool, fiberglass cloth. Such materials are placed in the inner cavity of the door leaf and fixed with a quick-drying adhesive base. A good alternative would be a self-adhesive insulation that will protect the room not only from heat loss, but also from extraneous sounds and noise coming from outside.

It remains only to “sew up” the structures with a decorative coating.

Interior trim replacement

Replacement interior decoration

Often, freezing of the front door in a private house occurs due to the insignificant thickness of the inner door leaf. If the structure from the inside is an MDF-sheet with a thickness of 0.6-1 cm, then the cold will easily penetrate into the room.

Loot check

seal for door frame

Often the cause of the formation of condensate and hoarfrost is a poorly insulated loot. If the door system is equipped with a metal box, then in order to protect it from the interior, you need to trim the frame with slopes or MDF. This method of resolving a problem situation is not difficult to implement and is financially beneficial in comparison with others. alternative options troubleshooting.

At the same time, one should not forget about the sealant, which “passes” along the perimeter of the entire box and the outer edge of the door tight. The presence of insulation will significantly reduce the number of cold bridges and make the door silent.

Adhesive rubber seal

Knowing what the front door should be like so that it does not freeze, you can take care of its insulation in advance and prevent the formation of frost.

VIDEO: How to insulate the front door

What are the basic requirements for entrance doors? First, they must be durable and insulated. There are several features of the choice of such products. Usually, many apartment owners buy entrance doors based on a good promotional offer, or a good price. Also, some are attracted by the beautiful external design products. However, if the front door to a private house is chosen in accordance with these criteria, only big problems can be acquired.

Before going to the store, you should figure out which entrance doors have a lot of advantages, how best to install them, what selection rules to rely on. This will help you buy a quality product that will protect your home from exposure. external environment and penetration of uninvited guests. The article presents a lot of photos of entrance doors for a private house.

Types of doors

Metal-plastic and metal structures are very popular. They deserve attention because they have many advantages. Wooden doors are usually not used. This is due to their low fire safety. Also, they do not differ in high strength characteristics.

Most often, apartment owners face the following problems:

• the appearance of ice on the street door for the house;
• rust;
• changing the appearance of the input structure.

These questions are best dealt with in detail.

Metal doors

Most apartment owners of multi-storey buildings choose metal structures. Such products are distinguished by high fire safety, and are also less susceptible to bad weather and mechanical damage.

However, you should get acquainted with the design features of such products, as well as the characteristics of various models. If the door is made with high quality, it can protect the property of the owners of the apartment from theft. It is necessary to take care in advance of the possible prevention of freezing of the product.

Design

It is worth thinking more about choosing a warm front door for your apartment in terms of structural reliability. Strength characteristics are affected by many factors. Among them, manufacturing technology occupies a special place. It is better to choose doors that are made of steel sheet having a thickness of 1.5-2 mm. The thickness of the sheet is directly related to the rigidity and strength of the door.

Important! Inside the door there should be enough stiffeners to ensure the preservation of the geometry of the structure.

Schemes of stiffeners can be different:

• transverse - when only horizontal elements are present;
• longitudinal - with vertical ribs;
• combined- as the name implies, both vertical and horizontal elements are installed in such doors.

Ribs arranged vertically are designed to resist twisting of the web. Due to this, the corners of the door cannot be bent. Horizontal ones are made to prevent the canvas from being squeezed or squeezed out of the box.

The best option is to purchase a door with combined ribs. This will completely protect the door from possible mechanical deformations.

Entrance doors to a private house can be equipped with a metal sheet not only on the outside, but also have a metal sheet on the other side. The structural elements are fastened to each other using a welding machine.

Provide elevated level security is possible only with the purchase of an armored door. Such models are produced using the technology of creating safes. Concrete is poured into the structure itself. This provides bulletproof product. Usually, entrance doors for a private house of this type are also equipped with special locking mechanisms of increased strength.

It is not recommended to buy a door made of metal sheet with a thickness of less than 1.2 mm. Often such products are sold under the brand name of Chinese production. Such tin can be cut with a regular knife.

The strength and reliability of the design is also determined by the design features of the box. It is better if the box is made of steel 0.3-0.5 cm thick.

Additional elements for protection

In addition to a reliable and durable door frame, it is necessary to provide high protection against burglary due to the installation of reinforced hinges. They may have different shape and be ball, safe, ordinary. Models with a support bearing are the most durable and efficient.

The design of the door affects the number of hinges. It is necessary to take into account its dimensions and material exterior finish, the amount of insulation. Even with small sizes doors must be equipped with at least 3 hinges. This will provide maximum protection. It is better if the loops are internal.

Metal entrance doors to a private house are equipped with pins that provide resistance when trying to remove the structure by force. Usually they are located at the end of the door. Such elements are able to fix the structure closed. Even with a successful attempt to cut the hinges and locks by an intruder, the door still will not open.

thermal insulation

In the harsh weather conditions of the Russian climate, special attention should be paid to reliable thermal insulation of the front door. If external decorative trim absent, frost on the metal sheet appears every winter. However, even in the case when the door is equipped with a double cladding, and there is a vestibule in front of the entrance to the apartment, the room is not sufficiently protected from the penetration of cold air.

In order for the temperature regime to be optimal, it is necessary to insulate the door with special materials. Usually use expanded polystyrene or mineral wool. Such materials have a low degree of thermal conductivity. To maximize thermal insulation, insulation should be placed in a special frame. When choosing an entrance door, be sure to clarify this.

Freezing of the door is excluded in several ways:

• Installation of a cold vestibule. The second door, which will go directly into the heated room, must be made of metal-plastic. This will maximize the protection of the room from serious heat loss.
• The cold door at the same time will not come into contact with warm air masses. This method of preventing freezing is more effective, therefore, it is used by many owners of apartments or individual houses.
• The use of insulated entrance doors for a private house with thermal breaks. A special insert is placed in such products, which is made of polyamide. The material has many advantages to effectively prevent freezing of the structure. For example, if the air temperature is -25 degrees on the street side, the inside of the structure will have an indicator of + 10 degrees. Typically, these models of doors are quite expensive.
• Installing an electrically heated door. A heating cable is installed along the contour of the structure. This prevents the formation of condensate. Electricity is consumed in the range of t 2 to 8 kW per day.

Regardless of the option chosen, it is imperative to equip the door with a double or triple insulation circuit. So cold air masses will block the way into the room.

Exterior finish

Before choosing a specific model of a street door, it is important to consider the features of the architectural style of the entrance. If it is in direct contact with the street, it should be lined with a material that is not afraid of temperature changes. It is also worth considering that the upholstery will be affected by various atmospheric phenomena and precipitation.

For entrance street doors, it is not recommended to use various chipboards as external upholstery. This rule also applies to PVC-coated products. Such products are not able to tolerate high humidity, they quickly become unusable under the influence of rain and snow, as well as high humidity.

Hammer painting will help to effectively protect the door from moisture. This type of coating is used for areas with a harsh climate.

If vinyl cladding is chosen, several features of the material should be taken into account. Such a coating does not have good frost resistance. After the temperature drops to -20 degrees, the coating becomes more brittle.

To give the door a sophisticated appearance, you can choose water-resistant marine panels as a cladding material. They are usually made from species such as oak, pine, alder.

conclusions

Unambiguous answer, which door better fit for an apartment or a private house, does not exist. It is important to consider factors such as climatic conditions region, intensity of operation, architectural style of the entrance. You can buy a finished structure or insulate the door yourself. In the second case, you can save a lot.

Any door should be strong and reliable. And the street front door in particular. A wide variety of materials and models - makes this choice very difficult.

There are many problems with front doors. These are low strength characteristics, a predisposition to corrosion and condensation.

Helpful information:

Advice! The aluminum profile will increase the strength of wooden door panels.

metal doors

The front door made of metal inspires confidence in many by its name alone. It is widely believed that such blocks are the most durable and reliable. What are the disadvantages in using them and is everything so simple?

Characteristics of entrance door designs

How strong the front door will be, the following points affect:

• Production process
• Design qualities

It is clear that the greater the thickness of the steel, the higher the strength of the door. good properties will have surfaces with a thickness of 1.2 mm. dl 2mm. Steel ribs increase rigidity and strengthen the structure.

Stiffener systems:

1. Longitudinal (vertical strengthening elements)
2. Transverse (horizontal strengthening elements)
3. Combined (a combination of several types)

The longitudinal system of ribs will protect the door from the possibility of bending corners. Transverse - will make it difficult to push through the surface of the door. Combining both stiffener systems will achieve optimal results.

The highest strength of the canvas can be achieved by booking. The manufacturing technology will be exactly the same as that of bulletproof safes. Pouring the structure with a concrete solution provides the necessary strength.

If you can work with metal, you need a unique and strong door, then you can do it yourself. Follow the instructions for .

Special Protection

Using reinforced loops - good way improve ingress protection.

Loop modifications:

• Ordinary
• Ball
• Safe

The most effective are hinges with a thrust bearing. This type will withstand the weight of heavy metal doors. They are also used for swing gate and massive garage openings.

Anti-removable pins - bonus resistance of the block to breaking. Reinforcing passive bolts connect the closed door leaf with the frame. Bolt - a retractable bolt of a cylindrical shape that performs the function of a locking mechanism. They are mounted from the side of the hinges on the vertical profile of the box or leaf. If the locks and hinges are broken, the door cannot be opened or removed from the hinges. The pins will hold the door in place.

Insulation of metal door blocks

To save the door leaf from the appearance of frost and ice, a layer of thermal insulation is required. Up to 25% of heat escapes through doorways. The metal has a high degree of thermal conductivity and is prone to freezing.

Advice. A canopy or canopy over the front door is an additional protection from the weather.

Materials for insulation

• Fibrous (mineral and basalt wool)
• Panel (extruded polystyrene foam)

The disadvantage of using mineral wool is vapor permeability. When moisture gets in, the material shrinks. In this case, thermal protection will be incomplete and ineffective.

Basalt wool does not accumulate moisture and does not shrink. It has low sound transmission and good vibration resistance.

The closed foam structure will not absorb fumes and moisture. Along with this, the foam boards will be good sound insulation.

Not as economical as polystyrene, but more efficient - extruded polystyrene foam and polyurethane foam.

Issues with freezing of metal entrance doors

Control measures.

1. Cut off the possibility of contact of the front door with the warm air of the living room. If the house has a vestibule or a veranda, install a metal-plastic door from the side of the heated room. The low thermal conductivity of metal-plastic will not allow cold air to penetrate inside and will solve the problem of freezing of the outer entrance door.
2. You can make a choice in favor of door structures with polyamide thermal inserts. The material dampens the effects of very low temperature conditions. For example, having -25ºС on the street, from the side of the room, the canvas will have plus 10 degrees. Such a profile will cost twice as much as a regular one. But the castle area will still be subject to freezing.
3. Electrical heating system. The heating wire, laid around the perimeter of the door, near the locks and inside the box itself, will be an effective barrier against ice. Additional electricity consumption is a minus of this method. But even at the lowest temperatures, the door will always remain dry.

Advice. A double, or better, a triple insulation circuit will ensure minimal heat loss through the gaps between the leaf and the door frame.

Finishing metal doors

From the outside, the front door is constantly exposed to a number of external factors. These are sudden changes in temperature, Sun rays, precipitation. The finish coat must withstand the impact without damaging the unit as a whole.

Finishes made of materials like chipboard or MDF are categorically not suitable. Even with PVC coating, such a finish will not cope with rain and snowfall. The coating will become unusable and will not protect the metal from corrosion.

Hammer painting is a great way to finish your front door on the street side.
Such paint, after drying, will have an interesting texture of “beating with a hammer”. Silicone resin and metal pigments in the paint will provide reliable protection from moisture. The paint dries quickly and is easy to apply. The ability to repel dirt makes the coating easy to clean. Painted metal doors look very nice. The color remains saturated for quite a long time. The paint is applied in several layers with a roller or spray gun.

Vinyl lining. Viniplast is a non-combustible thermoplastic material. It has good strength and elasticity. Viniplast will perfectly withstand various atmospheric precipitation. A serious minus is poor frost resistance. At -20ºС, the material becomes brittle and may crumble with a slight mechanical impact.

Waterproof finishing of oak, alder, pine shipboard panels will give the doors a chic appearance. The panels are made from high quality wood using moisture resistant glue. The impression of natural solid wood will cost accordingly.

Door locks

About 60% of the heat loss through the doorway falls on the mechanisms of the locks. When choosing a door, you should pay attention to which locks are installed. The best option These are two different types of mortise locks. The most reliable lever and cylinder types. Both of them have a fairly high degree of protection against hacking. It is physically impossible to break a lever lock, and it is very difficult to pick up a master key to a cylinder lock. Disc and cruciform opening mechanisms are also quite common.

Lock mechanisms are divided into classes according to the degree of resistance to breaking. For entrance doors it is recommended to use 2-4 groups. The class of the lock is indicated in the product passport.

What to choose besides metal doors?

Metal-plastic doors have sufficiently high rates of strength, durability, reliability. Certainly, steel door exceed these characteristics. But a doorway is not the only way an intruder can enter a home. So you can argue about which material is better.

PVC doors are widely used in low-rise construction. Are not exposed to formation of condensate and icing in frosts.

Choosing a metal-plastic front door

There are similar points in the production technology of PVC windows and doors. But in general, they differ significantly. High strength requirements for door structures allow manufacturing only from special reinforced PVC profiles.

door block

For quality inputs pvc doors a five-camera profile is used. Its thickness should not be less than 70 mm. The metal frame reinforces the structure from the inside. The fittings are located around the entire perimeter of the door. For the rigidity of the frame, strong fastenings at the corners are responsible. Such a frame will allow you to install powerful hinges and anti-burglary locks on the door.

Attention! When ordering a door, pay attention to the number of cameras.

For thermal and waterproofing, a rubber seal is used. It is located on all sides of the canvas and frame. Plastic doors for country and private houses are completed with additional reinforcement of the profile. This reinforcement provides additional protection against penetration.

Various options can be with trim, triplex inserts or armored glass. Triplex is laminated glass made by pressing. These materials will withstand strong mechanical impact from the outside. Provide good review Behind the door. Sometimes there are stained glass and tinted glass.

For reliability, give preference to models with a glazing surface of no more than a third. As a rule, the upper part is placed under the glass.

doors from PVC profile can be:

• Single leaf
• Double-leaf (for wide openings to evenly distribute the load on the hinges)

The shape of the entire block can be either standard or arched or round. Here you can read.

For centuries, wood has been successfully used as a material for the entrance doors to a dwelling: an affordable resource with low thermal conductivity. But a modern homeowner, when it comes time to choose a front door, focuses not only on design and insulation characteristics. Important criteria are reliability, the ability of the door to increase the comfort of households and serve as a barrier to an intruder. Given the variety of proposals, how to choose the front door to a private house cannot be decided based only on the cost of the options offered.

Doors as a visiting card of the house Source lv.aviarydecor.com

What are the functions of the entrance doors to a private house

The front door to a private house is a multifunctional attribute of the building, designed to serve for many years. Choosing it, the owner solves several important issues:

Thermal insulation. The higher the latitude, the longer the winter and the more severe the frost, the more important this characteristic becomes. The design should not only isolate the room from the cold outside, but also prevent heat from escaping from the inside, preventing the formation of cold bridges (fragments of the canvas with poor insulation). The problem is solved by seals and heaters, which at the same time improves sound insulation.

Wear resistance. A fundamental factor that determines practicality and resistance to weather vagaries, as well as accidental (from furniture brought in) and intentional damage.

Safety. The entrance metal door to a private house meets modern safety standards (including fire safety) better than analogues made from other materials.

Design. Entrance doors in a country house should not fall out of the general design plan. Thanks to modern technologies the design fulfills its main tasks without violating the harmony of the architectural style. The choice is striking in the richness of decorative solutions - manufacturers offer models with mirror elements and inlay, with forging, glass inserts and various fittings.

A door that adds lighting and visually expands the interior space of the house Source erp-mta.ru

What materials can you choose from?

The main entrance to the house attracts the most attention from the street. When it comes to choosing a material, cost, functionality and visual appeal must be considered.

Plastic

The material of such structures is plastic sheet and PVC profile, with or without double glazing. Thermal insulation properties of double-glazed windows reduce heat loss. Outdoor doors for a private house made of PVC have their advantages:

relatively low cost and ease of installation;

durability;

soundproofing;

no corrosion.

Minuses: structure may deform long-term action the sun; when melted, toxic substances are released.

Aluminum

A popular option with many advantages:

Environmental resistance (higher than plastic and wood).

Strong, durable, environmentally friendly, fit well into any interior.

Soundproofing.

Thermal insulation. It is provided thanks to the thermal break technology (polyamide insert that separates the metal of the profile and eliminates the cold bridge).

Wooden model goes well with stained glass inserts Source hullcoexteriors.com

Tree

No matter what material appears in the housing industry, there will always be consumers who will choose classic models from natural wood. The wooden entrance door to a private house is either made entirely of solid wood different breeds(does not contain any additional elements), or from a combination wooden planks and metal elements. Their advantages are:

Attractive appearance and variety of models.

Low thermal conductivity.

Some serious drawbacks prevent you from enjoying the classics:

High price.

Expensive maintenance - wood inevitably cracks and deforms, therefore it needs periodic processing.

Low security (easy to hack).

Low fire safety.

Use of fiberglass Source pezcame.com

Fiberglass

Such structures, due to their high insulating properties, are among the most energy efficient doors on the market. The benefits are not limited to:

Safety: they have the strength of steel structures, but without their tendency to corrode.

A variety of styles, the ability to imitate natural wood.

Unpretentious in care, resistant to dents.

Metal (steel)

The most popular models, due to the many options, the optimal ratio of price and level of security provided. In addition, they:

have excellent thermal insulation;

fireproof;

does not require Maintenance(periodic lubrication of hinges and locks is carried out).

There are few disadvantages:

possible corrosion in budget options;

The canvas is subject to scratches and dents.

Finishing option for steel entrance doors Source erp-mta.ru

On our website you can find contacts of construction companies that offer window and door installation services. You can directly communicate with representatives by visiting the exhibition of houses "Low-Rise Country".

Door leaf features include:

Thickness. Entrance doors for a private house are assembled from metal sheets 1.5-2 mm thick. If the value is greater, reinforcement of the door hinges is required.

Made from high quality steel. The design has stiffening ribs, protection of external loops (anti-cut).

Locks. Certified versions preferred. The castle zone is reinforced with a metal plate or box.

Noise and heat insulation. The space between the stiffeners is filled with a non-combustible sealant - mineral wool or polyurethane foam.

Video description

How to choose entrance metal doors on the video:

What you should pay attention to when buying, except for the appearance

The quality of materials. The quality of products must be confirmed by manufacturer's certificates (product warranty).

thermal insulation effective if:

the thickness of the thermal insulation is not less than 5 cm;

the total thickness of the frame and canvas and not less than 8 cm;

the design contains thermal bridges and a seal around the perimeter.

Security and elements of external control. The burglary resistance of the structure is determined by 13 classes. Street front door country house, like all analogues for residential premises, belongs to the first 4 (better - to 3 or 4). It is equipped with a lock with drilling protection, and a handle protected from pulling.

If glass model is selected, use a multilayer (shockproof) option. The peephole is selected according to the thickness of the structure, optimal angle view - 180 °.

Hinges for a street door. The most reliable (and expensive) are the shear-proof, adjustable concealed hinges. They are made of steel and can be adjusted (when skewed). If the weight of the product is relatively small, bearings are used for hinges. For massive structures, the option on red-hot balls is suitable.

Adjustable hidden hinges Source wareneinkaufen.me

Locks. The place where the locks are attached is ideally reinforced with an armor plate (protection against knocking out and drilling). It is more useful to install two mechanisms - lever and cylinder; they should be comfortable for all family members.

Pretends and platbands:

Platband. The task of this element is to mask the gap between the door frame and the wall opening, plus, to protect the door from breaking with a crowbar.

Porch. A protruding part of the outer sheet that protects the gap between the closed structure and the frame.

Fastening the door frame to the wall. Door frame - the frame on which they are mounted door hinges and the structure itself. It is under heavy load, so the steel in its profile must be thicker than in the door leaf.

The planes of the box and the opening must match. During installation, this parameter is regulated by the building level.

The choice of swing iron structures in a private country house

Sometimes external doors for a private house are designed in the form of hinged double-leaf models, which have their own advantages:

the sashes open more easily due to the distribution of the load on the hinges;

design takes less space when opening;

the façade makes a solid impression.

Models are available with sashes of different widths or with symmetrical sashes, as well as with fixed side transoms to narrow large openings.

Double doors for a country house Source genduk.hk.access.ly

Entrance door manufacturers and cost

Experts say that up to 90% of the models sold are of domestic origin, which is understandable. The quality of products of local manufacturers meets foreign standards, as it is produced on imported equipment, but the price and delivery time are often significantly less. Buyers are provided with warranty service; firms willingly produce non-standard designs to order.

The price of outdoor doors to a private house can vary widely, depending on the material of the leaf and the design solutions used.

• Economy class:

The price for standard economy class metal doors with vinyl leather trim starts from 4.5 thousand rubles.

For models with laminate or coating, they will ask from 6.5 thousand rubles, and if the shape of the opening is non-standard (arched and the like), then from 9.5 thousand rubles.

Doors with a reinforced leaf, albeit without any frills, will already cost 11-15 thousand rubles.

• Middle price segment:

Doors with glass and forging - from 16.5 thousand rubles,

A variety of models with MDF trim, the cost of which will be in the range from 23 to 38 thousand rubles.

• Premium class. They fall into two main categories:

1. Just doors made of natural materials - with solid wood finish, or models of wooden entrance doors for a private house completely made of wood. The price ranges from 39.9 to 70 thousand rubles.
2. Elite class products, the cost of which depends entirely on your wishes. It is not uncommon here that a price tag of 100-120 thousand rubles and more is the price for individual approach to the client and original design, which is designed taking into account the entire space surrounding the door.

Among foreign models, doors from China are widely represented, but their budget prices often mean the quality is lower than that of average domestic counterparts. The rest of the foreign manufacturers share a small part Russian market. Italian (MASTER, Panto, Dierre), Finnish (ALAVUS, Fenestra), Israeli (Super Lock) and Polish (Gerda) brands offer premium products using advanced technologies and natural materials.

Don't have to open doors to see who's outside Source kenneyandcompany.com

How is the installation

Whatever the street doors for a private house, the work goes according to the same plan:

Dismantling old design(optional) and preparation (alignment) of the opening.

Checking the completeness and operation of the lock.

Installation of the box (frame). The correctness of the position (coincidence of the planes of the box and the opening) is checked by the building level.

The level checks the vertical and horizontal planes Source bulgara-ny.com

The frame is fixed using mounting plates, anchors or steel reinforcement and secured.

The door is hung on the hinges, the course of the canvas is checked, the hinges are adjusted.

Technological gaps are filled ( mounting foam or cement mortar) with the door closed, protected by a film.

Slopes, platbands, door closer, locks and a handle are installed.

All gaps must be filled with mounting foam Source deco24.access.ly

On average, the installation of a steel street door takes 2-4 hours. Installation can be done at any time of the year; the only limitation is the mounting foam, which can be used down to -12°C (without warming up the cylinder).

An example of beautiful and original doors: photo and video

Video description

About the choice of doors from various materials on video:

And a few examples in the photo:

Few people use door knockers, but they look very nice. Source timgori.pw

Although half the area of ​​the door is occupied by glass inserts, it is quite difficult to crack it. Source stroy-masterden.ru

Wrought iron will never go out of style. Source formywife.info

The design of the doors is ideal for a house with a second light. Source deavita.fr

The design of the door looks very "powerful", despite the transparent wall Source masterlad.prom.ua

Conclusion

The front door is usually the first and last thing people see when they visit a home; this design is designed to give a sense of the character and style of housing. On the other hand, an exterior door is a thing that will last for many years. It is important to remember that all the while, outdoor entry doors for a private home will play a key role in keeping the home safe and energy efficient.