Repair of iron doors. How to replace the entrance door in the apartment when it is better to call professionals

Alexander

2018-11-23 14:28:00

I ordered a set of fire doors for the enterprise. Managers work quite quickly, the delivery of doors occurs within a few days. On the installation did everything neatly, respectively, safety technique. Thank you.

Catherine

2018-10-15 20:06:00

Recently decided and bought a doors in the company metal door Buldors and did not regret his choice. All employees of the company turned out to be very competent people who know the sense in their work and can help make the right purchase. I also want to mention operational delivery, high-quality reliable installation and affordable prices. Thank you so much!

Sofia

2018-09-26 20:07:00

I bought on this site a metal door to the apartment. Called, I learned everything and ordered! As it turned out, it was very simple, if you speak with such a consultant who knows a lot about his work, and which everything can be clear and can be explained to the girl! It is very, very pleased, thank you for this!

By itself, the door is very high quality, beautiful, heavy and reliable. The price was pleasant. Fast delivery! Installation, I also do not have any questions! Thank you very much for your work, keep up the good work!

Elvira

2018-09-25 20:06:00

Bought a doors in the company entrance door Argus with a mirror. For me, this option was the best price / quality ratio. This door in the role of the entrance is just excellent, and such a pleasant addition as a mirror - super, very comfortable! Worried about the fact that the mirror can somehow crash, but no! With constant opening, closing, flaking, etc. The mirror did not even frown. In addition, the door does not miss noise and smells. Absolutely I can recommend this door! If something happens to it, I will buy either her or analog! Thanks to the doors' company for selling such wonderful doors, quick delivery and high-quality installation!

Artem M.

2018-08-22 20:07:00

I bought in DocDoor 3 doors to a country house. The quality is excellent, the consultants explained everything, everything that I wanted - got, and the prices are more than acceptable! Well done guys!

Oksana

2018-08-19 20:06:00

I ordered a Mastino Ponte input metal door at DocDoor. I stayed very pleased. The door is beautiful, strong, reliable. Delivery and installation - at the highest level. Prices are available. Thanks to the entire Docdoor team.

Nikolai

2018-07-17 20:04:00

Half a year ago, I put "Italy" from Intelron. Pleasure, how to say, it turned out not cheap, but it is worth it. Excellent service, excellent wizard work, excellent quality doors.

Previously, I did not think about what qualities the entrance door should have, besides what to protect against thieves. Now it clearly felt all her advantages. Sounds from the entrance is not heard at all. We in the apartment entrances bordered with the kitchen. And if earlier in winter, a sharp contrast of temperatures was always clearly felt, now warm in the hallway is very preserved. In addition, on the staircase, they often smoke, the smell in the apartment does not fall.

As for the appearance, half a year the coating has not changed, no dents or chips. With confidence I can recommend.

Oksana

2018-07-12 14:33:00

Normal prices, there are no complaints to employees, installers, too, ordered several doors - everyone got how they ordered - there is a question about choosing, not everyone managed to pick up and tightened with delivery, 5 days, but they say that the transport campaign is to blame for a long time . According to the final, everything is OK.

Svetlana Viktorovna

2018-06-27 20:07:00

We ordered an entrance metal door in this store in early June 2015. At first they wanted to buy something very expensive, because everyone thinks, if it is very expensive, it means very well. The consultant suggested several models from different price categories, explained the benefits of all and we stopped on a more modest door model, but she meets all our needs, so why pay more? Very good employees see that they want to please, but not catch on the client! Thank you Great

Veronica

2018-06-15 20:05:00

Wonderful entrance metal door Mastino Line 3 (TOP), which I have acquired in the company Dor! Door without a single defect and scratch. Very high quality and heavy. Immediately fits a sense of security and safety. Company employees quickly delivered and raised the door to the desired floor. Plus ordered the installation. Work done perfectly. The door is installed securely. Thank you, I am delighted!

Louise

2018-05-12 20:06:00

Good day. I would like to tell about your successful cooperation with Docdoor. I ordered here the entrance metal door Buldors, and remained very pleased. A large selection of colors and affordable prices allowed me to choose the most suitable and affordable door. In addition, the delivery was carried out on time, and the installation - quickly and efficiently. Also, separately, I would like to note the work of the managers who gave a competent advice and politely answered all the questions.

Armen.

2018-04-10 20:05:00

I urgently searched for a friend beautifully decorated entrance doors in Noginsk, finally got to this site. Prices turned out to be very cheap for such doors, I immediately issued an order. Quality is satisfied, in the next. month I order myself the same)

Lily

2018-03-25 20:06:00

Bought in the company DocDoor the entrance metal door Buldors and stayed in complete delight. The door very pleased with its beautiful appearance, as well as operational characteristics. Perfectly keeps warm and does not miss outsided sounds. Also, I also want to say thanks to the specialists of this company for high-quality installation.

Vladislav.

2018-02-15 20:06:00

I want to say Many thanks to the company Dock Dor for the excellent entrance door Buldors and its installation. Employees fulfilled their work at the highest level - quickly, efficiently, neatly, just on time. The door itself without a single defect. I recommend to everyone.

Svetlana

2017-12-18 20:04:00

I have been looking for a long time ago where you can buy a high-quality metal door for affordable price. I am looking for a lot, looked, but there was nothing suitable. And then a friend told me about his successful purchase of a steel door in Docdoor, I immediately became interested. I took the necessary contacts and went to the site. You will not believe it, but I immediately found what I was looking for so long ago - Mastino Trento (TOP), it was this door that it came to me just perfect. I contacted the managers, they all told me about this door in detail, they said that the choice is really very good. I, without thinking for a long time, made my order. Plus, I used the delivery and installation services. The next day they brought my door, raised and installed. The result exceeded all my expectations, I'm in full delight. Mounted wonderful, gently and firmly. And the door is just gorgeous. Thank you, I will always contact you now. The choice is big, there is from what to choose. Prices also pleased.

Elena

2017-11-22 20:05:00

Ordered a tambour door for the office. Delivery and installation carried out quickly. We are satisfied with everyone. The price for such good quality is not overestimated, but taking into account the work it is even cheap.

Oksana

2017-10-08 20:04:00

For a long time they chose the version of the metal door with her husband. Considered quality and, of course, the price. From cheap " canning cans", Which are pushed from a random strike, refused immediately. Having studied the catalogs, they stopped at Argus, the model is called "Da-10 Isabel". In our opinion, the price value and quality ratio is the best. I will not talk about the external qualities, it's an amateur, although I am fully satisfied. First of all, the thickness of the steel was interested. Here - 2 mm, which is a huge plus. Also - the quality of the insulation, because it is he who is responsible for noise and thermal insulation. With this, everything is fine! Finally, ceased to hear the noise of the elevator from the entrance. The door closes quietly, smoothly, make special efforts do not need. There are two locks.
Delivered on time, ordered the doors with the installation. Master did everything quite quickly - about an hour and a half. Carefully, without any nuances.

Elena

2017-08-18 20:04:00

I'm just delighted with such a huge assortment of doors in the company Doc. There is an opportunity to choose perfectly suitable option. So happened to me. In terms of buying doors, I have always been picky, so there were always problems with it. So, I looked at a non -undable number of sites that sell doors, but did not find anything. But the miracle happened and hit the site Dor. Here, too, everything thoroughly looked around and surprised noted several options. Long "rushing" among them and eventually chose the entrance metal door Trento (TOP). It has everything that I was looking for anything superfluous. As they say, "not to give, not to take." This door is simply the embodiment of the "my perfect door."
Ordered and delivered the order quickly, it was very pleased. I also want to note the work of the installers who were very well installed the door. Now I just can't look at her, it's very good! Thanks a lot!

Ilya

2017-07-25 20:05:00

Bought the door "Italy 4" under the Red Tree of the company "Intelron". It was nice to know that in Noginsk delivery and measurements are carried out for free. The door was installed in one moment, no difficulties arose. I also thank the company for additional dismantling services old door. Now the neighbors constantly look at the door, and friends ask to give the name of the company. I am pleased to share information with everyone.

Eugene.

2017-06-09 20:05:00

Hello. I recently bought in the company Dor Dor steel door Intelron. Thanks to the large selection, which is presented in your catalog, was able to choose perfectly suitable door. Also used the delivery and installation services. Everyone was performed great, I am satisfied.

Danislav.

2017-04-08 20:04:00

I ordered the Safe-door Argus "Da-6". They fell on a discount, very glad that the provist at the right time on the site. The door of excellent quality, durable, reliable, no wonder it is called a safe door. Castles on so much difficult that hacking them simply unreal. Outside the door looks impressive and very strictly, but inside it is very elegant. The center has a mirror insert, which is very suitable for apartments with a small hall, as we have at home. I still can not rejoice, the family is delighted, friends and relatives are jealous with wide eyes.

Leonid

2017-01-30 20:04:00

I ordered the steel door of the company "Intelron" under the Durgundsky oak of the brand "Italy 1". The door is durable, without defects, delivered quickly, and most importantly - for free! Before that, the measureer also traveled to us, without demanding payment for departure. It was very nice to communicate with him. Installers are great, all work spent without delay, neatly. The warranty was issued for 12 months. It was arranged. I am sure that nothing will happen to such a door over the years of use.

Do you need urgent replacement of the entrance metal door? Our company is engaged in the production and installation of door blocks. If there is an urgent need for a dismantling of the old and installation of a new design, boldly contact our company "Russian doors". When contacting us, the cost of dismantling is free!

Emergency replacement of the door in the apartment often arises due to the failure of the locks, damage to the canvas of the box or damage to the coating. Also, after the expiration of the operation time, if the block was installed more than 10 years ago, provided that the product was qualitatively collected. Otherwise, the replacement of Chinese entrance doors is required after 1 year of use. When you should pay attention and think about

Change the entrance door in the apartment has become even easier

Turning to us as to the manufacturer, you get qualified turnkey services. We will select the desired size, decor, locks and fittings. Our experts exit to determine the size of the output blocks that require replacement. Metal entrance doors, the price of which is lower than the market, undoubtedly, practical choiceAnd a long warranty period will help to avoid an emergency situation.

Terms for standard and non-standard designs

• Urgent replacement of the input door of the standard configuration and size - 24 hours;
• Non-standard flaps of the canvas - 24-36 hours;
• Doors with individual requirements for decoration are established by agreement - 36 - 48 hours;
• We work in Moscow and the Moscow region;
• Delivery at a convenient time.

Finish

We offer wide our own production. Always in the warehouse there are all options that, undoubtedly, reduces production and assembly time. Perform any complex and classic combinations Decor.

Castles and fittings

We use products of domestic and imported production. Completing components officially acquired from plants guarantee the lack of fakes and falsification in the door articles. All goods are certified and has a great guarantee.

Decided to replace interroom doors in their apartment or house? Perfectly! Do not want to pay money to third-party installers? Not a problem! Any interior doors can be installed with your own hands. There is nothing complicated in this event. You only need to figure out the order of work for doors. different types And do everything in accordance with the manual for your case.

Work on replacement interior doors Begins with dismantling old door structures. If your dwelling is "naked" doorways, you can skip this part of the instructions and move to the manual on the direct installation of the product.

The order of dismantling will vary depending on whether you need to keep the old door in the appropriate form or you simply get rid of it after dismantling.

If the door is no longer needed

First step. Remove the door leaf with loops. If the hinges are collapsible, quite simply lift the cloth. Otherwise, you must first unscrew the fastening looping screws and only after that you can remove the door.

The second step. Remove the ticket. To do this, put the platbands using a fombus and tear them away from door box.

Third step. Remove the fasteners that secured the door fixation. In the absence of anchors or other fasteners, go directly to the next step.

Fourth step. Run the layer of foam with hacksaw. To do this, run a hole in the upper layer mounting foamSo that in the joker it was possible to start a hacksaw, and then drank the material to Niza. Repeat the operation on each side of the box. So you can easily get rid of the mounting foam.

Finally will only align the opening before installing new door.

If the door needs to be saved

First step. Remove the cloth with loops.

The second step. Get a rock between the door frame and the cowver at the point of fixing the nail item. Carefully try to disrupt the nail with the help of the chisels. After the fastener is shifted for a while, capture it with pliers and pull it out. Extract all nails according to such a scheme and remove the items of cash.

Third step. Remove the box and thoroughly clean it from foam residues. Cut the possible amount of mounting foam with a knife. For the remains of the foam, apply a pharmacy domexide. Under its exposure to foam will be soft, and you can remove it.

Installing a swing door

Regardless of the manufacturing material, all swollen single-door doors are installed in the same order.

First step. Remove the old door in accordance with previously obtained recommendations. If you wish, you can leave the old box and install a new web into it, but this option should be considered only if the budget is on repair work Strictly limited.

The second step. Measure the opening or an old box. Typically, the size of the boxes and openings comply with the standard, but it does not prevent in particular in the case of replacing interroom doors in a private house.

If the dimensions do not meet the standard, the box and directly the cloth will have to be ordered by individual measurements.

If you have the need to trim the box or the cloth, it is strongly recommended to do this solely in the joinery shop. With the home execution of such a work, the slightest error can lead to full damage.

Third step. Determine the side of opening a new door and the place of installation of the handle. Apply a label to the door frame door loops. The optimal distance between the bottom loop and the bottom edge of the canvas is 20 cm, between the upper loop and the corresponding side of the canvas - 15 cm.

The loops must strictly coincide with the door to the door. Use screws for fixing loops.

Fourth step. Install the door to the fastened loops. Make sure nothing prevents the doors to open and close. If necessary, adjust the position of the loop.

Fifth step. Remove the web with loops and lock the door frame in the opening. To do this, set the box in the level, drill in it and on the surface of the opening the mounting holes and fix the product with anchors and dowels.

Sixth step. Take the web back to the loop and check out the result of the work.

Seventh step. Fasten the elements of deasure using decorative nails.

Finally, you will remain mounting the door handle. If desired, set the score or more modern door lock. In most modern models door handles There are built-in locks. Pre-prepare for them the corresponding recesses in the door frame.

Control the smooth installation of structural elements at each stage of operation. Immediately get rid of all defects, because In the future, they can lead to serious problems and inconveniences.

Installation of the door type "coupe"

First step. Remove the old door in accordance with the previously obtained recommendations.

The second step. Carefully align all the gaps. It is important to get rid of all available gaps and other defects.

Third step. Make a groove from the bottom end of the panel. This will help you a chisel. Then put in the finished groove the guide in the form of the letter "P" and fix it with high quality. Inside this guide, the rollers of the mechanism will be moved.

Fourth step. Insert the rollers into the fixed bar.

Fifth step. Install the door to the guide by simultaneously attaching it to the mobile rollers. To do this, you need to start the cloth in the grooves of the rollers. It is more convenient to perform this operation with an assistant. One holds - the second exhibits the door.

Sixth step. Determine and check out the right place to install the guide at the top. Check with a plank below. The top bar must be placed in the wall above the opening.

Seventh step. Attach the metal guide to the wood bruster. Laming with guides Fix anchors to the upper end face of the canvas. Check the level of installation of the door. It is important that the bar is placed in a horizontal position. Otherwise, the doors will be closed and open without your participation.

Eighth step. Install the door canvas. First, set it up vertically and slightly tilt into the opposite side. Next, you need to start the top rollers on the appropriate guide, then slightly lift the web and start it on the bar at the bottom, while at the same time installing it on moving rollers.

Ninth step. Install the limiters that will not allow the canvas to fly out from the guide slats. Set the handles. Hide the top rake with a platband. To fix the platband, use self-tapping screws or decorative nails.

Check out the door performance. The canvas should move smoothly and gently. Any defects eliminate immediately after they are detected, without postponing for later.

First step. Get rid of the old door in case of its presence. Align the walls of the liberated opening - the differences are unacceptable. For leveling it is very convenient to use wooden boards. In the deepening of the plank, you feed on the protrusions - spill.

The second step. Check out the free opening and calculate the required number of panels for assembling the door.

Third step. Cut the side profile so that its length was 25 mm less than the height of the opening.

Fourth step. Cut the panels so that their length is 40 mm less the height of the opening.

Fifth step. Collect individual panels into a single design. It is most convenient to do it on the floor.

On the sides, place a special panel with channels - on the left fixing bar, right to the lock bar. For connecting items, use end planks. Additional fixation will provide staps. Make a pair of holes for magnetic latches on the lock bar and lock the latches.

Sixth step. Prepare axial marks on the left side of the upper end of the planks. Make holes on the markup.

Seventh step. Insert the axes. After installing their ends should go beyond the boundaries of the ends of the panels.

In the design of different "harmonica" there are often certain differences. If your door design is equipped with runners, then the holes for the axes do not need to drill. In this case, the sluts need to be screwed to the end faces of the panels. Start fixing the sluts from the lock panel and secure through one bar.

Eighth step. Cut the guide bar in accordance with the width of the opening. Set aside the third part of the length of the guide and drill in the intended point the hole for the screw. Fix the shocking screw.

Ninth step. Install the runners in the guide bar, pre-enabling them.

Tenth step. Align the guide using a level and fix it with a second screw.

Eleventh step. Secure the side guides. To one of them, you need to fix the clips of the side profile, to the second guide to attach the magnetic latch plate.

On this, the installation of interior doors of the "Harmonica" type is completed. Check the mounting quality, make sure that the door moves smoothness. When troubleshooting is detected, immediately eliminate them.

Work, as always, start with dismantling the old door, if present. Align the walls of the opening and go to the fulfillment of the main stages of work.

First step. Collect the door frame. For the assembly, use the boards of a width of about 10 cm and a thickness of about 6 cm. For bonding boards is the most convenient to use the usual spike connection. The angle of the compound should be equal to 19 degrees.

The second step. Secure the aligned box in doorway. Pre-drill the wall mounting holes in the wall, and then fasten the design with pins or thick nails.

Third step. Make sure in accordance with the dimensions of the doorbeated box size. If necessary, compatheet the end sides of the clouds to the required size.

Fourth step. Secure the loop in the appropriate places. Previously determine which way it will be more convenient to open the doors.

Fifth step. Take the door cloths on the loop. Set the handles and make sure the work done.

Thus, in an independent replacement of interroom doors there is absolutely nothing complicated. Having understood in the main provisions of the presented guidelines, you can cope with all the upcoming events without attracting third-party specialists. This will allow you to save additional funds and be completely confident as an installed installation.

Good job!

Video - Installation of double doors

Video - replacement of interroom doors do it yourself

Spoiled entrance door - tragedy. The company "SERVICE OF THE DOOR" completely restores door structures, returning to them beautiful appearance And former functionality. We repair the entrance metal door in the apartment, a private house, office space. We work throughout Moscow, we offer prices available to all residents of the capital.

Our services

• Castle replacement on the inlet metal door.
• Repairs door canvas.
• Repairing cores and pens.
• Installing the bron alphabet and shield panels.
• Adjusting the loops and aligning the door frame.
• Restoration of upholstery after emergency or vandal opening.

We work legally and have the necessary licenses. The client who ordered the service in the company receives a guarantee to 2 years.

Cost of work

The minimum price is from 1,300 rubles. On the service market is a profitable offer! Such a cost allows you to form close cooperation with direct suppliers. To change the upholstery, replace the castle or perform other works, buying material from them, saving your tools.

How long does it go on the road?

Offices are located throughout the capital, the Master leaves for about 30 minutes. Specialist has required tools and accessories.

Why do many choose "doors service"?

We are a specialized service service providing professional services to restore the door. We also perform restoration work, returning door construction Former look. Sometimes to return the door functionality, it is enough to make the repair of the door canvase and replace the locks.

• We use branded products, tested by time.
• We offer a large selection of door products: locks, larvae, loops, armored layers.
• Find the door with material to your choice: vinyl slip, dermatin, MDF panels.
• We restore the doors regardless of the degree of damage and the type of upholstery canvas.
• We carry out work related to welding and cutting metal.
• We serve the doors of different manufacturers: metal, iron, steel.

Appreciate your and your time. We leave for a challenge immediately after accepting the application.

Need to open the door, open the lock, adjust the loop or make the upholstery replacement? Score specified phone number. We provide free consultations. We tell about the advantages and disadvantages of a particular model. We help to decide on the choice.

Often, the start of repair is marked by the fact that you need to replace the entrance door to the apartment.

Circuit diagram of iron entrance door.

Having bought a new box and entrance doors from a proven supplier, you can proceed to the dismantling of old.

Required tools

Required tools: level, hammer, perforator, crisp and flat screwdriver, greasy tape, Bulgarian with a disc on metal.

Replacing the entrance door will require some tools. Among them:

• mounting (Lomik);
• malyary Scotch (if there is no protective film);
• dowel-nails (12 cm long and 1 cm diameter);
• drill (15 cm long and 1 cm diameter);
• water pulverizer;
• a hammer;
• level;
• foam assembly;
• perforator;
• hoven for metal;
• screwdriver;
• spacer wedges;
• cross and flat screwdrivers;
• bulgarian with a disc on metal.

Before working it is necessary to take care of protection - put on gloves and safety glasses.

Dismantling inlet door

Installation diagram of the entrance door under a semicircular platband with a doorway finish by fair elements and a platband.

Before replacing the entrance door, it will take to dismantle the old one. At the same time, it is necessary to remove not only the canvas, but also its other elements.

The design is quite simple. If the canvas are attached with folding loops, then in this case the following method is applied. To begin with, the door opens at an angle of 90 degrees. If there are no necessary skills, this process is better to exercise together. One below the bottom of the door sends a lomik or mount closer to the side where the loops are located. His partner must hold himself to the cloth until it can be removed, and it does not jump off the loops entirely.

If the door was fixed with all-point loops, then it is necessary to unscrew them with a screwdriver or screwdriver from the web or box itself. The same thing is done when the detachable loops rusted or shifted them. If the tools do not help, they are cut by a grinder. Instead of mounting, any other tool, such as a screwdriver, reinforced with a support on the bar is suitable.

Next, dismantling a wooden box. Before this, the plaster is fighting back from the room. If it is found that the door is recessed from the side of the room, then the plaster is chopped into the places of slopes.

Diagram of device doorways.

If the door is located at one level with inner wall, the folding of plaster produce up to 15 cm wide from the edge edge. If the box at one time was stamped, the foam is cut across its perimeter.

Next, with the help of the knife, one of the racks is collected and removed by the mount. After the upper part remaining from the side rack is dismantled. Then remove the upper and lower crossbars and threshold. Gently remove the remaining stands of the rack. All applied elements of fasteners - self-tapping screws, anchor and nails - stretch and twisted in advance. If difficulties arise, they are easy to solve, using a grinder or hacksaw for this purpose. If the protruding metal parts remain, then they are easier to score into the wall. Old stucco during operation will be retrivened. It should be cleaned, freeing the perimeter of the opening.

In the event that the doors were installed on the box made of metal, then the work will not be easy. She probably secured, applying welding for this purpose. Therefore, the work will be required by Bulgarian, which will have to cut the welded rods.

The opening at the end of the work is reported from the resulting garbage: mortar, pieces old plaster. It is possible that it will take a hammer for this.

After completing dismantling, the entrance door is installed. It is divided into installation of the box and the door itself.

There are 2 embodiments depending on a number of parameters:

• installation level of a new box relative to the way;
• fitting Position: Apartment, House.

Types of entrance doors.

The installation itself is carried out thanks to the clins of brushes cut at an angle. They are clogged between the box itself and the wall or the floor (or ceiling). Excellent wedges are obtained from the old box! It is very important that the technological clearance be the same from all sides.

The insert is carried out so that the level on the "spike" demonstrated the "horizon". It is applied to the side rack with loops on both sides. For the door made of metal, the magnetic level is very convenient. Its length is 400-800 mm. At the same time, a smaller length level will give an error, more - the exhibition of horizontal will arise. Indeed, in apartments, the width of the classic doors is 900 mm.

Impacts should stand strictly vertically. Each of them placed 2-3 anchor bolts.

Determining the desired horizontality and verticality, the box is carefully fixed on the mounting plate installed at the top loop.

Fastening option number 1: Features

Installation diagram of the entrance door under a flat platband.

The standard installation option is concluded in its mounting plates. Usually, their 3 pieces are installed along the length of the side racks.

They are applied by the room on the walls of the opening. Therefore, the door to the inside is set flush with the wall.

Further, the reinforcement or rod from the metal, whose diameter is 12-16 mm, clog through the holes in the plates. Subsequently, if there is welding machine, they are welded to her or sprinkle, otherwise anchor bolts are installed. In addition, they greatly simplify the installation and future dismantling of the box. Also use dowels-nails. For them, drill holes in the wall using a perforator.

In this method, the clearance of 1-2 cm is 1-2 cm between the wall and sides. This mounting option is used for a private dwelling. However, if the wall thickness allows, it can be used in the apartment.

The option is used when it is possible to drown the door in the opening. Doors in this case are located far from the edge of the opening, and the plates will not help. This option is used if the wall has a necessary thickness from 150 mm. If it is smaller in size, the attackers can easily snatch it.

Anchor bolts are fixed through the holes done in it.

The scheme of using a multicolor stencil for registration of entrance doors.

After completing screwing, they wear plugs painted under the color of the box installed.

If a box without finished holes, then they are drilled. After that, it is fixed with steel rods, which are clogged into the wall through the hole done in the box. Further, thanks to the welding process, they are grabbed from the inside. To carry out this process, there is a 0.5-1.5 cm gap between the box and the opening on both sides.

Installation sometimes combine both of the above method. Metal bolts and rods are used in this case with a length of 10 cm and a thickness of 1-1.5 cm. The bolts are used to mount the box made of wood.

Direct installation door to the apartment

The insertion of the web is carried out upon completion of the installation of the box in the opening. Installation of it the same for doors from miscellaneous material. The door alignment is carried out on the side of the rack with hinges. To do this, use a plumb or, as an option, a construction level.

Next, the holes are drilled through the mounting plates. For this, the perforator or drill is used. The diameter of such holes is 1.5 cm, and the depth of the opening varies in the range of 10-12 cm. Pins (anchor bolts) are inserted into them. All is again checked by the level. It is necessary to make sure that the box did not move during drilling process. Next, the bolts are welding or fixed.

Door loops are lubricated with machine oil and balls are inserted into them when it is provided by their design. After hanging out the outward, part of the lubricant is carefully removed. Close the door with the pre-installed fitness.

At the same time, you need to make sure that the final attachment is that the door can move without effort, and the accessories work properly. When using this instruction, the replacement of the entrance door will be prompt and efficiently.