Make a wooden deck chair with your own hands with dimensions. Homemade chaise lounge for a summer residence with your own hands. Chaise lounges and deck chairs for summer cottages: the main types
(18
ratings, average: 4,22
out of 5)
What summer resident does not dream of relaxing after a hard week of work on his site, taking a comfortable position on a comfortable folding bed? However, a deck chair is not a cheap pleasure if it is really high quality and good. What to do for those who cannot afford a good sun lounger, but the desire to relax is great? Do not be content with little: put an uncomfortable bench or chair aside.
This article will cover instructions and a step-by-step explanation, and even an amateur carpenter will be able to make a sunbed with his own hands, which can even be taken on a fishing trip. The chaise lounge will harmoniously fit into your country exterior and will become an integral element of your rest.
What is a sun lounger
A deck chair is similar to a wooden chair, but is more reliable and less overall dimensions. It is convenient in that a person can take a position suitable for the spine and spinal muscles. Another no less pleasant fact is that the back of the garden chair is adjustable. The garden lounger is quite mobile: in summer period it can be in the garden on the site, and in winter - somewhere in the house.
In order to make folding wooden chairs, you will need:
- Some kind of tree, since this material is most successful for a garden lounger, besides, it is quite environmentally friendly;
- Rattan;
- Plastic;
- Two-centimeter slab of glued wood;
- Wooden boards and bars;
- Kit necessary tools: jigsaw, drill, screwdriver.
- Drill;
- Rollers (diameters 10 centimeters);
- Corners (mounts);
- Sanding sheets;
- Varnish, paint (at your own discretion);
Chaise lounge dimensions
The traditional size of a deck chair is 60 x 190 cm, but you can choose the one that will fit exactly your parameters. You should start with a schematic representation of the future chair, drawings should include all the nuances. When a decision has been made on a suitable size, it is already possible to start preparing the details.
Construction stages
It is necessary to prepare the bars for the legs - 5-10 cm. Next, you need to attach the legs, stepping back from the edge of the bars 5-7 cm, and rollers to them.
Parts of the lattice for the chair must be made with a jigsaw. For them optimal size will be 8 x 60 cm. Spacers will help make a suitable distance from 1-2 centimeters so that the slats can be screwed to the frame. After all this work has been done, the chair needs to be sanded and varnished or painted.
If desired, you can make a folding country chair. In this case, the wooden grate must be divided into 2 parts, which then you need to connect with help door hinges. Also, do not forget about the mounting plate, which must be installed so that it supports the rack, screwed on with screws.
Bed with fabric
The easiest way to make a deck chair with your own hands is a chair made of dense material on a frame. This is the best choice for a suburban area, as it is quite multifunctional: in a matter of seconds you can make a chair out of your country chair.
Necessary materials:
For a folding summer chair, a fabric of sufficient density, good quality and not exposed to sun rays and moisture. You need to choose jeans, canvas or canvas.
Work must begin with the preparation of slats right size and their polishing, and after that you can start assembling all the elements.
Assembly instructions
It is necessary to drill holes for the bolts of the desired size on long bars, eliminate all irregularities by grinding. Then in a place located close to the head lying, it is necessary to make the same holes so that you can change the angle of bending.
At the ends of the long bars, two holes must be made through which the seat will be made. The diameter of the round bars should be the same as the diameter of the long ones. For a better connection, coat the ends with PVA glue.
Connect all the received elements with bolts through the holes made in the headboard.
After the above steps, you can proceed to the final touch - stretching the fabric. Pull the fabric over the frame products, fasten the edges to the crossbars with a thick thread (if you decide to sew the fabric before attaching it to the frame, you can use a sewing machine).
Armchair Kentucky
This chair, perhaps, can be called even more interesting than the previous ones, because it will really become a decoration of your site. The assembly of the Kentucky chair is carried out only by means of bars.
In order to make a chair, you will need the following materials:
Assembly instructions
You need to start with wood processing in order to prevent its destruction, fading, to protect it from moisture, sunlight, and wind. At this stage you you need a special mixture for deep impregnation of wood for the purpose of coloring (stain). It should be specifically for work with exterior items. You can also use parquet oil, suitable for wooden items. After completing this stage, you need to process all the bars with sandpaper.
Holes must be made with a diameter of six millimeters.
A chaise lounge is a comfortable and lightweight chair design that is used in places of recreation: on the beaches, by the pools, an integral part of the decoration of the dacha. It can be used to relax after a hard everyday day at work, caress yourself with the sun's rays or take a nap under the shade of the local trees, away from the curious eyes of the townsfolk.
In this article, we will talk with you about how you can make a regular wooden deck chair, give examples of photos, videos and instructions.
How to make a sun lounger with your own hands?
First choose suitable look and modification of the sun lounger. Plastic, wood, synthetic fabric and aluminum can be used as the base material. We have chosen the most affordable option sun lounger made of wood.
Type of tree for sun lounger
Tree selection is based on the following principles:
- material possibilities;
- future owner's preferences:
- garden style;
- available handy materials.
When choosing the future wood for your lounge chair, you pay attention to the mechanical properties of a particular type of wood. For example, the most durable types of wood are: ash, oak, larch and beech. With them, the design will delight you for many years. Wood is distinguished not only by the durability of its service, but also by its aesthetic component.
In turn, finished products made of noble wood species are not the cheapest pleasure for the buyer. Such a thing is not always available to an ordinary consumer who is trying to save any extra penny, because money is not superfluous. Before assembling the sun lounger with my own hands, look at the drawings of the sun lounger.
Type of wooden deck chair
A self-made chaise longue will not only be an example of prudent spending of the family budget, but will also add zest to the appearance of your fabulous country garden.
In magazines and newspapers, countless drawings, projects and ready-made solutions for wooden deck chairs have accumulated. The dimensions of homemade sun loungers are identical to industrial models.
A folding deck chair is much more comfortable than a regular one. It is easy to move around the territory, and in winter it can be folded and removed, even cloudy weather will not create any interference.
Preparation and manufacture of a sun lounger
Pre-purchased parts for the structures of the future deck chair must be processed, we impregnate the wood with an antiseptic and anti-corrosion compound. We grind the surface to a perfectly smooth state. The resulting details are put aside and proceed to the study of the drawing.
If we turn to the latter, we can see that the crossbars are fixed to the lower part of the legs. They allow you to fix the back in the desired position. When installing only one plank, it is first necessary to make cuts in the places where the planks are installed in increments of 5 cm, starting from 20 centimeters.
The back frame should have bolt attachment points, we retreat from the edge on each side by 41 centimeters, and on the very base of the seat - 43 centimeters indent from above.
First you need to assemble the frame for the back. The main load will be transferred to the bar 20 x 60 x 610 mm, so pay special attention to fixing it. It should be of the highest quality. It is customary to leave a distance of 1 centimeter between the planks. It will be needed to secure the fabric in the future.
Using the above instructions, we assemble the main frame. Then, we connect 2 frames together - the back and the seat. Pay attention to the back frame, it is necessary to drill a hole on it from 2 sides, the distance is 41 centimeters for the back and 43 centimeters for the seat. Screw the two parts together with nuts and bolts.
Attention! During regular use of the chair, the nuts may gradually loosen and unscrew. To avoid this trouble completely, fasten the locknuts. For better fixation of nuts, "Moment" or ordinary paint can be used.
To determine the degree of free play, first tighten the nut firmly, and then gradually weaken. Let the paint and glue finally set.
The next step is to mount the support for the back. Planks are fastened with bolts and washers. Choose only thick fabric for the seats, the best choice there will be tarpaulin, canvas and jeans.
The material blank is folded 2 times and stitched with an indent of 1.5 centimeters. After that, it must be turned out. We bend a piece of fabric on one side so that the rod can be inserted and stitched. We do the same on the other side.
We push each of the ends of the folded fabric between the slats and insert a rod into it. We will get a tightly fixed seat, and at the same time dismantling it to wash it will not cause any problems.
DIY sun lounger photo
Do you want to make your vacation in the garden even more comfortable? Then use one of the many ideas and build a deck chair with your own hands. In this article we will talk about what material to choose to work on creating this type of garden bench, and how to properly assemble the structure with your own hands. We will also compose step by step instructions how to make a sun lounger at home.
A variety of materials for the manufacture of deck chairs
If you literally translate the word “chaise longue” from French, then you will get a “long chair”, for the manufacture of which natural wood is most often chosen. But along with this material, plywood, durable fabric, plastic and wicker, etc. are actively used. Some craftsmen decorate their site with rocking chairs made from corrugated cardboard, as well as logs. As practice shows for the production of this type garden furniture you can be creative, using elementary, improvised materials that are no longer useful in the household. The table shows the characteristics, features, advantages and disadvantages of wood, plywood, fabric as a material for a do-it-yourself deck chair.
| Materials for making a sun lounger | |
| Tree | When choosing a wooden material, it is necessary to pay attention to its structure and the breed from which it is produced. Experts do not recommend buying spruce because of the smell of resin, which will only worsen under the influence of sunlight. As a base, it is better to use ash and larch, they are characterized by strength, durability and ease of processing, and therefore not complicated by the installation process. It should be understood that the prices for natural wood are quite high, so saving on this material will not work. Wooden furniture must be treated with antiseptic agents, since without proper care it quickly rots and deforms. |
| Textile | A feature of fabric furniture is its environmental friendliness and safety. Such structures are relatively light in weight and are as mobile as possible. Along with these advantages, the following disadvantages can be distinguished: fragility, instability to ultraviolet radiation. Fabric deck chairs are not able to withstand heavy loads. For comfort, it is best to choose natural materials, without a variety of additives, pigments. |
| Plywood | Fairly common construction material, which is actively used for the manufacture of a variety of furniture, including sun loungers. For this purpose, they acquire one of the varieties of plywood FK, it is intended for interior decoration and does not contain toxic impurities. Structures made of this material are lightweight and have affordable prices. However, plywood products cannot be called durable, and besides, they are not suitable for people with a lot of weight. |
Craftsmen with weaving skills can use wicker, bamboo, and rattan as a material for a deck chair, which make the furniture look attractive, mobile and safe. As a rule, ready-made structures of this type are characterized by a high price. The disadvantage of wicker products is their instability to precipitation and prolonged exposure to sunlight.
On modern market there are many ready-made plastic deck chairs, which differ in price, shape, type (monolithic, portable). plus plastic products can be called insignificant weight and variety design ideas, embodied in the manufacture. The disadvantages of plastic rocking chairs are fragility and instability to aggressive climatic conditions.
Chaise lounges are distinguished by structural strength, the frame of which is made of metal and treated with anti-corrosion agents. When using aluminum, the structures are light and practical. In combination with metal frame most often used fabric materials.
Chaise lounge drawing options
On the Internet, on sites related to construction industry, presents a variety of options for drawings of a deck chair. Leisure garden furniture on wheels, with a canopy, with adjustable backrest, etc. will become indispensable after a hard day's work and will allow you to relax with a cup of tea, or reading a good book.
Regarding the appearance, the designs of sun loungers are usually divided into three categories:
- soldered with inserts;
- monolithic;
- portable.
Monolithic models are structures that cannot be disassembled, as they consist of solid elements. They have an attractive appearance, can be decorated with a variety of inserts from combined materials. As a rule, monolithic deck chairs are characterized by their strength and relatively large weight, rather big dimensions. The disadvantage of such products is not an adjustable headboard, backrest.
Designs that can easily change the position of the backrest, etc. are called portable. This type of product is considered mobile and very convenient, they are called a progressive option. Due to their folding abilities, this type of deck chairs is easy to transport. Any of the above designs can be supplemented with mattresses or original pillows that will ensure a comfortable stay.
To make a deck chair at home, beginners can already use finished projects and drawings that the Internet is rich in, and which have been tested in practice. For example, original version it is considered to assemble a Kentucky chair (from bars) with your own hands, as well as a deck chair from wooden beams which will take some time to make.
Features of making a simple wooden deck chair with your own hands
The most common dimensions of deck chairs, which can even be called standard, can be called 60 by 190 cm. Next, we will consider the process of manufacturing a simple wooden rocking chair with a flat base, but with an adjustable back. Wooden furniture for this purpose most often has a fairly large weight, which makes it difficult to move around the site, but this problem can also be solved at home, for example, attach roller wheels to the legs.
So, for the production of a wooden deck chair with your own hands, you need to purchase and prepare the following tools and materials:
- wooden bars and boards;
- galvanized screws;
- drill;
- jigsaw;
- roulette;
- drills and screws;
- hammer;
- corner;
- brush and varnish.
It is possible to carry out work on assembling a wooden folding chair in several stages, which are as follows:
- the manufacture of the base;
- frame sheathing wooden gratings;
- fixation of support legs.
Now we will consider each of the stages in more detail, but first we will answer the most common question among home craftsmen: How to properly mark a tree with your own hands? So, wood marking is needed in order to significantly reduce the percentage of material waste, that is, to use it as rationally as possible. To do this, the master needs to own a drawing, which details the constituent elements of the structure and their exact dimensions. For marking, the master needs to prepare a sheet of graph paper and draw on it necessary details, then the workpiece is transferred to a thick cardboard, cut out and, according to the contours, marked on wooden material. The cut elements must be sanded and treated with antiseptics in order to significantly extend their service life.
To make a base for a wooden deck chair, you will need bars, the cross section of which should be 45 * 45 centimeters, while the diameter of the drills will be 40 millimeters. It is necessary to start the installation process with the preparation of two long and two short sidewalls. They are connected to each other with metal corners and screws. Further, the outer side of the base is sheathed with carved wooden gratings, the number of which varies relative to the length of the frame. Not the last place in this business is occupied by the processing of parts and fasteners for making a deck chair with your own hands. On long planks, at an equal distance, places are marked for the legs, they are made of a wooden block, to the bottom of which wheels are attached with screws. An adjustable backrest on a handmade wooden deck chair can be made using a door hinge.
For this, the lattice is divided into two groups: the first plays the role of a headboard, the second of the base. A cross rail is used as fastening. After the complete assembly of the structure, the master needs to use a grinding machine and process the sunbed with it, and then, using a brush, open it with varnish, allow it to dry completely. As a result - a ready-made, comfortable, adjustable deck chair of our own production.
Features of making a fabric deck chair with your own hands
Fabric sun loungers are very popular among consumers, which, due to their folding design, are very convenient to use. As practice shows, many craftsmen make such products with their own hands, bringing to life a wide variety of ideas, turning home holidays into a holiday. Due to their low weight, fabric sun loungers are easy to fold and carry around the territory, take them to the beach, etc.
The frame for a fabric product can be made of wood or metal. Let's consider both options. To assemble a product for this purpose, you will need the following materials and tools:
- wooden bars (oak, birch or beech);
- nails;
- sandpaper;
- drill and drills;
- PVA glue;
- durable fabric (jeans, camouflage, etc.);
- roulette;
- bolts;
- round sticks.
Step-by-step instructions for making a deck chair with your own hands in this case looks like this:
1. To assemble the base of the sun lounger, three frames are prepared different sizes: the first - 1200 mm * 600 mm, the second - 1100 mm * 550 mm, the third - 650 mm * 620 mm. Holes are made in them, due to which the structure will be connected.
2. First, the first and third frames are connected, bolts and round sticks are used to fasten them, then the first and second blanks are attached, the joints are treated with glue.
When choosing a fabric base, you should pay attention to its composition, manufacturer, structure and quality. It is necessary that the selected material be durable and natural, this will extend the life of a homemade deck chair. The master has the opportunity to acquire the basis of the desired color, to embody his state of mind and mood into the product as much as possible. Also portable, a fabric chaise longue can be a great addition to home decor.
Many beginners are interested in the question: how to properly assemble a structure with a metal frame with your own hands? Why is this option so popular? The fact is that the metal base is maximally adapted to changing positions and is easily subjected to various upgrades. Finished products of this type are quite compact, they are easy to remove and store when not needed.
The assembly of a deck chair with a metal frame is practically the same as the previous one, wooden version, only in this case it will not be required bars, but metal frames, for the manufacture of which it is better to use steel or aluminum. Do not forget about the treatment of the material with anti-corrosion agents, otherwise rust will soon appear, which will not only spoil appearance products, and damage the fabric base.
In order for fabric lounge chairs to retain their original qualities for a long time, professionals recommend using a variety of impregnations that create protection from the active effects of ultraviolet radiation, repel moisture, etc. Usually such funds are valid for up to 4 weeks.
is coming holiday season, which means that soon we will have useful physical labor on the site and, of course, a pleasant rest. Quality rest is no less important than active physical labor.
Everyone relaxes in their own way, but you are unlikely to refuse to lie down on a comfortable deck chair and dream or take a nap in the cool shade of the trees.
The demand for garden furniture is growing every year, and manufacturers are in a hurry to satisfy the desires of customers by offering various options this product.
Chaise lounges and deckchairs are one of the types of garden furniture that are in great demand and popularity, differing only in appearance, price, quality and material of manufacture.
Sunbed or deck chair?
Let's see how these models differ from each other.
Deckchair - This light garden an armchair with an elongated seat, translated from French - a long chair, designed for relaxing reclining. In terms of height, the back of a deck chair practically does not differ from the back of a conventional chair, but usually has several positions (levels) of location, models are often equipped with armrests.
sun lounger - “portable bed”, lower and wider than a deck chair, is designed to rest lying or reclining, as the headboard is adjustable in height and can recline completely to take a resting horizontal position with the body.
Wooden lounger
As you know, wood is the most environmentally friendly and safe material for human health, with high aesthetic qualities and a pleasant aroma. A wooden chaise longue or lounger is not only comfortable for relaxing, but, of course, is an adornment of any garden.
On sale there are wooden deck chairs of various designs: from ordinary reclining chairs to comfortable, repeating anatomical curves human body models.
The back of the lounger is usually fixed in several positions, so you can always take a comfortable position for sleeping or reading. Due to the massiveness of the structure, wooden models are additionally supplied with a pair of wheels, with which they can easily move from place to place.
In addition to the sun loungers, you can purchase or sew yourself a soft textile mattress, the rest on which will be especially comfortable. The mattress is attached to the lounger with ties, Velcro or rubber bands.
Chaise longue made of plastic
Plastic deck chair - a budget option, these are often found on vacation, in hotels they are placed around the pools. Plastic models are attractive at a low price compared to others, they are easy to care for, they are quite mobile, they are not afraid of water.
However, there are very interesting and by no means cheap designer models.
Swings and rocking chairs
Chaise longue swing will provide comfortable rest with easy rocking. The design of the deck chair is suspended on a stable, often metal support stand and sways freely in the air.
A visor or umbrella is usually attached to the upper part to protect against scorching sun people.
Internsny version of a deck chair, reminiscent of a rocking chair. Instead of stable legs, the structure is equipped with rounded supports - two metal hoops. This model is easy to fold and move.
Wicker beds and sun loungers
Wicker furniture is an indispensable attribute of a Mediterranean-style garden. It is made from various materials: natural rattan, wicker, hemp or synthetic fibers.
This furniture belongs to the premium class, its price is much higher. Rattan sun loungers are distinguished by rich natural colors beauty, elegance and style.
Chaise lounge and lounger with your own hands
If you can’t afford factory or designer furniture, then you yourself can act as a designer and craftsman in the manufacture of garden furniture for relaxation by building a deck chair or deck chair with your own hands. After all, there are so many natural materials around us, which, if used correctly, can become comfortable and beautiful furniture.
Ordinary logs will turn into an original lounge chair for relaxation, if you fix them on curved metal arcs.
And these sunbeds are made from ordinary wooden pallets. Two pallets at the base are fastened together, and the back is made from the third. It is only necessary to sand the surfaces a little and paint them in the desired color.
This model is made of wooden bars and planks, pre-sanded. To make it, it is enough to arm yourself with a hammer and nails, or a screwdriver and wood screws. The size of the lounger can be customized according to your height.
Bed made from corrugated cardboard. Original, simple, cheap. But you need to remember that such a model is afraid of moisture. However, on a sunny day, it will perfectly perform its functions.
A fairly easy-to-make folding deck chair made of wooden slats with a textile seat, you can make it yourself. The back is fixed in several positions.
The diagram shows the dimensions, quantity structural elements and assembly order.
A sun lounger can be made from plywood sheets with a thickness of at least 20 mm. Two identical blanks are interconnected by dowels (cross bars with a diameter of 25-30 mm). To do this, you will need additional tools, such as a jigsaw and a grinder.
To transfer the pattern to a sheet of plywood, you will need a template. It can be made from thick cardboard, fiberboard or paper. Next, using a jigsaw (better than a jigsaw), we cut out the blanks. We make holes for the connecting elements and assemble the structure with glue and screws.
After the glue dries, we fasten the horizontal planks of the deck chair to the rigid structure with screws. It is advisable to drown the screw heads, and then seal them with putty. It is necessary to grind the parts before starting the assembly. Subsequently, the chaise longue can be painted, dried, the awning can be pulled up and a removable textile mattress laid on the slats.
Of course, one of the main criteria when choosing a model of a sunbed or deck chair is its cost. How simpler model the cheaper. The second (and often the first) criterion is convenience, the third is beauty. A do-it-yourself deck chair may well meet all three criteria: minimum costs, sufficient comfort and originality. Let rest on suburban area brings you pleasure. Make it as comfortable as possible.
Not so long ago, a deck chair was considered exotic, and only wealthy people could afford it. We saw sun loungers in colorful magazines and American films, but even with a strong desire, an attempt to buy something like this for ourselves would have turned out to be a failure - there simply were no sun loungers for sale.
Well, everything passes sooner or later, and the information revolution generously endows us with new opportunities. Now anyone can find on the Internet a manual on how to make a sun lounger with your own hands. However, such plans are often difficult to implement, especially for a beginner. They require the use of a large number of expensive tools, and therefore remain unfeasible for many.
This master class is a pleasant exception to the rule. The deck chair presented by the author has simple design and a clear system of folding and adjusting the backrest. If you approach the issue of choosing materials correctly, you will need a very modest arsenal of power tools and, in extreme cases, you could well borrow some of them from friends and acquaintances.
In addition, given the fact that the deck chair is made of natural wood, it can easily be used at home as well, instead of a couch or armchair in the living room. It quickly folds and unfolds, has a completely finished appearance. A beautiful textile mattress will complement the image, and the deck chair will perfectly fit into the interior of your home.
In order to make a deck chair with your own hands, you will need:
Materials:
Pine board 20 - 30 mm thick;
- slats with a section of 30 x 30 or 40 x 40 mm for the manufacture of a backrest folding system;
- natural or mineral oil for woodworking, drying oil or varnish for woodworking;
- screws and small nails;
- glue for gluing wood materials;
- metal one-piece loops for fixing the back: two more and a smaller pair;
- a ready-made mattress with ties for fixing it or fabric, batting, foam rubber and threads for its manufacture.
Tools:
Miter saw, circular saw or wood saw;
- a grinder if you are using old or unpolished boards;
- screwdriver or Phillips screwdriver;
- electric drill;
- a clamp with a device for drilling pocket inclined holes (optional, but greatly facilitates the work);
- paint brushes;
- construction tape measure and square;
- pencil.
Step One: Sketch and Layout the Chaise Longue
A product layout is simply necessary if it itself consists of a large number of parts. It will not allow you to get confused in their countless list and will significantly speed up the entire work process. In addition, you will have the entire list of parts and their exact size. Well, without this, then?
But everything is preceded by a sketch. This sketch on a sheet of paper by hand gives rise to an idea and lays the main outlines of the image of the future product. That's where you should start.
In your case, the computer layout of the deck chair is already ready and you can safely take all the dimensions indicated in this master class as a basis. But first, write down on paper the entire list of parts that you have to make. Specify their sizes opposite and only after that proceed to work.
Step two: making parts
The detailing you have collected should be transferred to the material in the form of markings. Use a pencil for this to easily correct crept in errors. Also use a construction square. Especially if you plan to use a hand saw to cut the boards. It will allow you to mark angles at 45 and 90 degrees, and accuracy is never superfluous.
So, mark up the parts and start making them. Saw the boards into pieces of the length indicated on your list. You will need:
Two longitudinal frame parts 1850 mm long;
- five transverse frame parts 470 mm long;
- four blanks for legs 280 mm long;
- four - five boards for the base of a deck chair 1270 mm long;
- two side long boards for the base of a deck chair 190 mm long;
- two small slats for supporting the backrest when folded, 580 mm long;
- three bars for the manufacture of the backrest 43 mm long;
- four - five boards for the base of the back;
- two slats for the backrest folding system, 230 mm long;
- one horizontal rail for the backrest folding system, 460 mm long;
- six small pieces of rail for the backrest folding system - three on each side.
All indicated dimensions should be specified, since the author indicated them in inches. They also depend on the thickness of the boards you are using. To figure out the dimensions in your case, always start with the general values and work your way down to the finer details.
Step three: assembling the sun lounger
Start by assembling the deck chair frame. Remember that it is customary to assemble any frame with screws. This ensures the relative strength of the entire structure. However, it often happens that screws alone are not enough. Then glue is also used. Such combined connections serve very well and do not require repair for a long time.
Assemble the chaise lounge frame with glue and screws and fix the legs. Fasten the base parts to the frame with small nails. In parallel, make the back panel.
Inside the hole for the back on the sides, screw two support rails on which the back rests when folded and on which sections of the rail (teeth) are attached to adjust the inclination of the back. Fix your teeth.
Connect the back to the frame using a pair of one-piece metal loops. Also make a U-shaped piece for the back and secure it in place with the smaller loops. Check backrest adjustment.
Step Four: Wood Protection
Any furniture will sooner or later be subject to wet cleaning. Untreated wood hardly tolerates such processing, and the result often turns out to be zero. Therefore, the tree must be treated with suitable paints and varnishes.
The author decided to leave the wood unpainted so that it could be seen that it was made from natural wood. In this case, the most reasonable option would be to varnish the deck chair with a matte or semi-gloss transparent varnish.
Since furniture is usually used very intensively, you should choose a varnish that will give the most durable and wear-resistant coating. For example, profile furniture varnish. Apply it to the surface of the wood in several layers and let each one dry thoroughly.
