How to make a sofa with your own hands. How to make a sofa with your own hands: step by step instructions. Corner sofas in the interior

Everyone knows that upholstered furniture is necessary in every home. But there are people who cannot find a quality option for themselves from the store and decide to start making their own. The most basic step to this work is that you yourself will accurately make a model of the size that your living space allows.

Many people wonder what is a modular sofa? It is not difficult to answer, because this is a standard corner sofa known to all of us in its various representations. It would seem that it would be very difficult to assemble it on your own. But do not despair, even a beginner can cope with the task, the main thing is to have a desire.

Possible to create original design

It is worth noting that a self-made sofa immediately eliminates such shortcomings as:

• wrong size;
• irregular building forms;
• inharmonious to the interior color design and decoration.

You can create semi-circular sofas or with an acute angle, it all depends on your imagination. It is important that in the end you will get the original model, which will be no worse than the store version, but at the same time it will cost several times cheaper.

Preparation for work

Before you start work and prepare all the necessary material, you need to prepare detailed drawings and diagrams. This stage will help to avoid mistakes in the work, in addition, you will be able to correctly purchase everything necessary materials avoiding extra costs. Dimensions can be taken on the Internet, but later change them to suit your room.

1 2 3

Then, in the hardware store, you should purchase the following materials for work:

• plywood bars, chipboard;
• furniture legs and lifting mechanisms;
• foam rubber, synthetic winterizer, pillow filler;
• upholstery for furniture;
• jigsaw, drill, screwdriver;
• construction stapler with staples;
• screws and nails;
• wood glue and PVA glue.

In order for a do-it-yourself modular sofa to turn out no worse than the store version, you need to cut out beautiful armrests. If you do not have experience in carpentry, then you should order a cut from a professional who, according to the drawings, will make perfectly even models.

Sofa frame assembly

First you need to assemble the armrests. It would seem that the smallest details, but they require close attention during assembly. Since they should turn out perfectly even and symmetrical, you must clearly follow the instructions. Experts put a special bar between the sides of the armrest, which controls their size. All parts are connected using self-tapping screws and a screwdriver.

Next, you should assemble the frame of the sofa. You need to start with two bars of the same distance and thickness and connect them to each other with longitudinal bars. You need to connect it qualitatively and firmly, so that in the future the sofa does not loosen up and you do not have to repeat the procedure. Next, you should attach to the base of the board on which the back of the product will be held.

Fabrication of the frame Closing the oriented strand board

For additional strengthening, you can use wood glue.

After the actions taken, the resulting structure is upholstered with plywood sheets, forming a uniform box in which, as a result, you can store personal items or bed dress. As soon as the frame is ready, immediately screw the legs to the product, otherwise it will be much more difficult to do it later.

Assembly of the rest of the parts

The backrest for the sofa is also assembled separately from the frame, in full accordance with the drawings.

The back is connected almost at the end

The retractable part is assembled, but at the moment it remains aside, since it has not yet been sheathed with material and a soft layer. Everything is fastened to self-tapping screws, and then interconnected in the following order:

• back to frame;
• armrests;
• retractable part.

Sheathing and decoration

How to make a sofa soft and comfortable? This is much easier than assembling the frame and installing each element together. Decorating, as the final stage, brings more positive emotions, as the result actually becomes visible. At the same time, this stage is very important, because how carefully you finish the work will depend appearance new handmade furniture.

It is better to start with the armrests, since it is they that have to be aligned and given exquisite curves. The foam pads do an excellent job of making the armrests very comfortable and soft. We cover the seat with the same foam rubber. It should be carefully fixed with glue, otherwise she will walk while using the sofa for its intended purpose. When all the soft parts are wrapped with foam rubber, you can start covering the furniture with fabric upholstery.

The original design of the armrests of the sofa

The fabric should be chosen one that can serve you for a long time, without unexpected damage. Also, be sure to consider how often you will need to clean your sofa. If there are small children or animals in the house, you should upholster the furniture with breathable fabric, which makes it easy to get rid of dirt. Well, do not forget about the interior of the room for which the furniture is made. The upholstery must match it in order to create additional comfort.

The sofa is the heart of the home. It serves as an element of interior decor, helps to relax after a hard day's work. A sofa is not just a piece of furniture. It will certainly become the visiting card of the house and the center of attention of your guests.

In this article, you will learn how to make a sofa with your own hands no worse, and maybe better than those sold in furniture stores. You will see what elements the sofa consists of and what materials are most often used in the process of its manufacture.

Do not forget that homemade furniture saves the lion's share of the family budget. If you decide, for example, to make a sofa yourself, its cost will be two or even five times lower than the market price!

However, it depends on the selected materials and the particular design. Folding sofa will cost more, but if this is your first product, opt for the project described in this article - it is perfect for those who set out to learn how to make upholstered furniture.

Make a sofa with your own hands - and you will see by your own example that there is nothing complicated in this!

So let's get started.

For work you will need the following materials and tools:

1.Tools:
- electric jigsaw. If you don’t have a jigsaw, it doesn’t matter: use a hacksaw for wood, especially since it will also come in handy in the process of sawing bars;
- pneumatic furniture stapler. If you intend to make only one product, use a mechanical stapler - it will be cheaper;
- screwdriver;
- grinder or planer for grinding sharp corners of the frame;
- a staple remover or a sharp screwdriver;
- a sharp knife for cutting foam rubber;
- scissors;
- sewing machine for stitching sofa upholstery elements;
- roulette.

2. Materials:
- bars with a section of 40-50 mm;
- plywood or any other available, durable and, if possible, lightweight sheet material;
- furniture foam rubber, 50 mm thick. Foam rubber, like many other materials, you can purchase in a specialized online store "everything for furniture";
- synthetic winterizer or batting for additional softness of the frame and the product as a whole;
- furniture fabric;
- joiner's glue;
- strong thread for stitching upholstery details;
- self-tapping screws or furniture screws (when using the latter, you will need an electric drill);
- a marker or pencil.

Let's get to work.

1. Frame
The basis of our sofa is the frame. It can be of any shape and size, but this article describes the simplest project, which can be made by a person who is inexperienced in production. upholstered furniture.

The frame is based on wooden bars and slats with a section of 40-50 mm or any other size that ensures the strength of the finished product.

Provide additional rigidity to the frame sheet materials with which it is sheathed - plywood, OSB, chipboard, fiberboard, etc. Inside the frame is hollow, which makes it relatively light.

At home, the sofa frame is assembled with a screwdriver and self-tapping screws. Holes for screws can be pre-drilled with a drill, and the screws themselves can be lubricated with wood glue when drilling.

Also, glue is often used at the junction of wooden parts before they are connected with self-tapping screws. In this case, they are pressed against each other with clamps for a while.

In addition, when assembling the frame, it is convenient to use all kinds of angular and curvilinear metal fasteners.

The length of our sofa will be 3 meters. It is quite roomy and consists of two equal parts - 1.5 m each. In the photo below you see one of them - the left side of the sofa.

2. Frame and mattress
The frame of the future mattress - the base of our sofa - is made of board. For greater comfort, a binding of furniture belts is arranged.

It is not difficult to make it: first, the belts are fixed with a stapler horizontally, then the binding should be done and the belts should be fixed perpendicularly - vertically.

The photo shows what we should get in the end. These are the two components of the mattress.

3. Back
In the photo below - the frame of the back of our sofa, sheathed with plywood. Please note that the frame itself is made of wooden blocks, and metal connectors are used to fasten the parts.

The back is hollow and light, it is convenient to work with it. The shape in this case is as simple as possible - rectangular in profile. Without much effort, you can make it sloping by increasing the width at the base and reducing the width of the frame at the top.

4. Side pieces
By analogy with the back, we also make the side parts of the frame. It should be noted that the protruding bars that are visible in the photo in the future will serve as a basis for foam rubber. But more on that later.

5. Pasting with foam mats
After assembling the frame, we proceed to mount the foam rubber.

With pieces of foam rubber of the required size and shape, we paste over the top and front of the back, as well as internal surfaces side elements. We lay the foam on the mattress over the binding.

The adhesive can be applied with a wide brush or used as an aerosol. Immediately after applying a layer of glue, we press the foam rubber to the surface and leave it for a while (usually no more than half an hour) until it sets.

6. Sintepon (batting)
In order to hide irregularities, smooth out sharp transitions and add volume, the back, side parts and, if desired, the mattress is wrapped with padding polyester or batting.

Before proceeding to this stage, it is necessary to sand all the sharp corners of the frame so that the upholstery does not rub off and lasts as long as possible. This operation is carried out using a grinder, planer or just coarse sandpaper.

7. Fabric upholstery.
Covers are usually sewn according to ready-made patterns and patterns. If there are none, you can make them yourself by applying and trying on fabric to each of the elements of the sofa, whether it be a back or a pillow. Some of them can be sewn with zippers for easy cleaning and washing.

Covers can be cut strictly in shape, or they can be picked up and grabbed with a stapler in those places where the design allows.

In extreme cases, tailoring of covers can be entrusted to specialists from the studio. Their design is very simple and inexpensive.

In order to make furniture, you need to create a drawing, it will also be impossible to make a sofa without this stage. It is not necessary to purchase expensive materials for sofas, including timber with a large cross section or laminated boards. It is not recommended to equip and complex spike connections, since only a professional carpenter can make them. It is not worth using nails as fasteners, since such connections will loosen pretty soon and the sofa will creak. Self-tapping screws would be the best solution. Additionally, you need to apply glue.

Making a corner sofa

In order to make the corner design of the sofa, you need to stock up on the following materials and tools:

Figure 1. Schematic drawing of a sofa, the dimensions of which can be adjusted depending on the dimensions of the living room.

• pine timber 30x50 mm;
• 5 and 15 mm plywood;
• lifting mechanism;
• 3 mm fiberboard;
• 16 mm chipboard;
• legs in the amount of 9 pcs.;
• 20- and 40 mm foam rubber;
• upholstery fabric;
• holofiber;
• synthetic winterizer;
• batting,
• hacksaw;
• miter box;
• stapler;
• drill;
• self-tapping screws;
• screwdriver

Figure 2. Drawing of a sofa with measurements.

On fig. 1 shows a schematic, the dimensions of which can be adjusted depending on the dimensions of the living room. Work should begin with the unfolding of the elements, including: frame, backrest, armrests, seat. Assembly must be done in the following order. The armrests must be the same, and they are assembled using self-tapping screws.

You can deal with the frame of the left side by preparing two sidewalls, to which the longitudinal bars are strengthened, and after that - the racks. The latter should be reinforced with transverse ties. Now you can proceed to the installation of the seat of the left side. It is necessary to carry out the installation of the seat frame. As soon as the frame is installed in the frame, plywood needs to be strengthened from above. After that, you can fix the fiberboard to the back of the left side. At the next stage, you can proceed to the installation of the right side.

Back to index

Folding product under the Japanese futon

For the manufacture of a sofa, the frame of which can be sheathed or ennobled with Japanese futons, pine furniture boards.

The main modules, seat and back have frames that are mounted by connecting two side walls in front and behind with the help of boards. To the elements that are located along, it will be necessary to strengthen the base for the mattress, which includes transverse slats.

Figure 3. Dimensions of blanks that need to be prepared before starting work.

On fig. 2 you can see the design drawings with dimensions. And fig. 3 contains the dimensions of the blanks that must be prepared before starting work.

Using a drawing and a circular saw, you need to cut the material. Corners are recommended to be processed with a jigsaw, smoothing the edges with fine-grained sandpaper. Before starting the installation, the elements must be coated with acrylic varnish, and then left for a while to dry. The side parts of the seat must be connected to each other by longitudinal boards, using 2 dowels planted on glue. The furniture coupler will allow to give to a design additional rigidity. The same technology should be used to assemble the back of the sofa.

Swivel joints must be equipped with bolts and hex nuts. To the longitudinal elements of the back and seat with screws and glue, you need to strengthen the bars 30x30 mm.

In the holes of the longitudinal boards with a diameter of 10 mm, you need to install bushings, which are borrowed from furniture sets. M5x80 screws should be installed in them. You can mate the swivel joints of the legs with 80 mm screws. The slats need to be fixed with a belt tape, for which you should press a segment to the workbench with clamps, which will act as a stop.

The seat and back frames must be bolted together. In order to get a strong connection of the sidewalls of the back, you need to glue the bars and press them with clamps until the drying is complete. The cross rails are mounted on screws, which must be fixed one at a time on both sides.

With the help of a self-prepared drawing, you can make any sofa, but it is better to entrust cutting to professionals in their field.

A beautiful sofa serves as the main design element of any room. This is not just a piece of furniture, but also a visiting card of the whole house, to which the attention of the guests who have come is usually riveted. In specialized stores, such furniture, as a rule, is quite expensive. If you make a sofa with your own hands, it will cost much less. At home, making it is not at all difficult.

Nowadays, furniture items that combine unusual design, style and functionality.

Using a simple project, even a person who has never worked in the production of upholstered furniture can make a quality product. If in a modern apartment such a sofa will not look very respectable, then in country house or in the country, it will perfectly fit into the local interior.

One example is a pallet sofa with drawers..

The main components of the product are:

• frame;
• back;
• side parts;
• fabric upholstery.

Such furniture can be made independently from improvised materials, giving it the look that you like.

The frame can be of any shape and size. For its manufacture are used wooden slats and bars. To give the structure greater rigidity, sheets of plywood or chipboard are used. Assembly is carried out using a screwdriver. All joints are first smeared with wood glue, then wooden details tightened with screws. In addition, it is desirable to fix the joints with corner metal fasteners.

A beautiful sofa serves as the main design element of any room.

The frame for the mattress is made of boards. To give the product greater comfort, the supporting area of ​​the frame can be made of interlaced furniture belts. First, the belts are mounted vertically on the frame, then a horizontal binding is made perpendicularly. Despite the fact that such a sofa does not use traditional steel spirals, it will spring perfectly. Therefore, it will always be pleasant to lie on it.

The corner bed looks more prestigious than the usual folding version.

The back is usually made hollow inside. It can be given a rectangular or sloping shape. To do this, the end width at the base increases, and decreases at the top. The side parts are made in the same way as the back. The top and the front side of the back are pasted over with foam mats. Foam rubber is also glued to the inner sides of the side parts. Glue should be applied with a wide brush in an even layer. Until the adhesive has completely set, the foam sheets must be firmly pressed against the surface to be glued.

Independent production of home goods makes it possible to create an original design that fits perfectly into the interior of a particular room.

Fabric sheathing is performed according to prepared patterns or patterns. If you do not have them, they are easy to make yourself. To do this, the fabric is tried on for each element of the sofa, after which the necessary cuts are made. After covering all the constituent parts with matter, final assembly. Simple design such furniture is usually completed in three days.

For the manufacture of a rounded sofa, furniture panels are most often used. They are made from wood or thick plywood. Such material enables the round structure to cope with the required load. To fix the upholstery in the dimensions of individual parts, there must be a certain margin. It is desirable to make the lower soft parts under the skin multi-layered. Thanks to this, the sitting will be much softer and more comfortable.

The manufacture of a sofa-book should begin with the creation of individual frame elements of the entire structure.

How to make a sofa book

The manufacture of a sofa-book should begin with the creation of individual frame elements of the entire structure. This includes sidewalls, backrest, seat, laundry box. First, a linen compartment is made from the boards. This frame is reinforced at the corners with short pieces of beams, and from below it is supplemented with slats. For the back and seat, bars are also used, which are connected with self-tapping screws or special notched nails.

In the manufacture of the sofa, the following tool is used:

• wood saw;
• screwdriver;
• plane;
• hammer;
• scissors.

For the back and seat, bars are also used, which are connected with self-tapping screws or special notched nails.

Wooden lamellas are screwed to the resulting frames. They should play the role of support for the mattress. After all the frames are ready, assembly is carried out. However, special mechanisms are needed here. You can buy them at the construction market or in the store. When installing the mechanisms between the folded parts, you need to leave a gap of about one centimeter.

The comfort and convenience of sitting on the sofa will depend on the quality of this element.

In this case, the sofa should be laid out. Due to the presence of a gap, it will fold and unfold freely. Before laying foam rubber, on top of the lamellas, you first need to stick interlining. This will enable the sections of foam sheets between the lamellas not to fall through. The surface will always remain flat. So that the sheets do not interfere with the operation of the folding mechanisms, the corners located near these parts are cut off.

However, special mechanisms are needed here.

A soft cushion is usually made on the edge of the seat. To do this, an additional foam strip is glued on top of the continuous layer. The lower edge of the strip is bent under the seat and also glued. The armrests are softened in the same way. A similar procedure is performed with the back. When the glue under the foam rubber is completely dry, the covers sewn to the size of the furniture are put on.

Making a corner sofa

First, the lower part is made, that is, the seat. The boards to be joined are fastened with self-tapping screws and corner plates. Chipboard sheets are screwed to the bottom of the resulting box. A separate frame is made for support. The supporting part is also covered with plywood. Behind you can pull a dense matter. The dimensions of the product are associated with the parameters and shape of the mattress.

When installing the mechanisms between the folded parts, you need to leave a gap of about one centimeter.

The steps for manufacturing an additional structure are similar. To connect the individual parts, an angular structure is made. Usually it is made of the same material as the main elements. During the manufacture of this design, the angle of rotation should be taken into account. The back and supporting parts are pasted over with batting. The back side is covered with a dense cotton fabric.

Family members spend a lot of time on it.

The legs are usually made from square pieces of timber. For fastening to the lower frame, holes are drilled in the bars. After that, they are applied to the bottom of the frame and screwed with long screws. In the manufacture of such furniture, special attention should be paid to the design of the structure. If it is not done correctly, various deflections, deformations, and other similar flaws may appear in the future.

Behind you can pull a dense matter.

For the manufacture of furniture, the following materials are used:

• board;
• timber;
• foam rubber;
• furniture fabric;
• wood glue.

If you decide to buy some unusual bed in a furniture store, then you may not be able to afford it. Original products are very expensive. It will be much better to make a custom sofa bed with your own hands. It requires bars, boards and plywood sheets of appropriate thickness. The back is assembled from planks and pieces of timber. The front part of the assembled frame is best sheathed with chipboard sheets.

The steps for manufacturing an additional structure are similar.

They are quite durable, and in stores building materials are inexpensive. It is desirable to treat the assembled base with a stain or varnish it. As a result, it will last much longer. Foam rubber sheets are used for the soft parts of the product. Fabric materials are attached to the frame with special wide-head nails.

Fancy sofas

Often they are made from improvised material. Especially if the product is intended for giving. The base and back of this furniture can be made from used door leaves. Details are cleaned of old coatings and dirt, and then processed with a grinder. Then they need to be painted or glued with veneer. One door leaf is mounted on wooden supports. The second sash is used as a back. It should be attached to the base at an angle convenient for you.

In a cozy home there is always beautiful upholstered furniture.

The mattress is cut out of foam rubber. The piece of material must match the size of the seat. The resulting blank is first covered with a dense fabric, then a beautiful fabric of good quality is put on top. In the manufacture of such furniture, special attention should be paid to the reliability of the frame base. It should easily withstand the load that will arise from sitting on the sofa of several people.

Often they are made from improvised material.

Beautiful and cozy furniture for relaxation can be made with drawers in which it is convenient to store bedding and clothes. Due to the high functionality of the design, there is no need to additionally install a chest of drawers or a wardrobe in the bedroom. This will save living space, make the room more spacious.

The product includes the following components:

• back;
• seat;
• a pair of armrests;
• drawers.

It should easily withstand the load that will arise from sitting on the sofa of several people.

Each part of the product is knocked down separately. The back is assembled from long slats. To ensure the necessary rigidity, the planks are reinforced with short transverse bars. To get a sloping back, the back slats must be longer and the front slats shorter. Chipboard sheets are installed on top of the resulting frame, which are then pasted over with foam rubber and sheathed with fabric.

A similar frame is mounted for the seat. Its only difference is that it does not have a beveled part. Armrests are attached to the sides. They should be screwed with long screws in several places. Drawers are frameless. Chipboards are also used as a material here. To make both drawers slide out easily, special mechanisms are installed on the racks of the frame.

Beautiful and cozy furniture for relaxation can be made with drawers in which it is convenient to store bedding and clothes.

After all the details are pasted over with foam rubber, a synthetic winterizer is laid on top of it. Further, to protect the soft material, the entire sofa is sheathed with a strong fabric. The appearance of the furniture depends on the quality of the final skin. If you want your product to look fashionable and respectable, you can use leather or a good leather substitute. Now there are a large number of such materials on the construction markets.

Use of improvised materials

From simple elements You can make furniture that will easily fit into any interior. If the design consists of natural wood, the product will serve properly for more than one year. Worn-out covers or cloth lining, if necessary, is easy to replace. Today, those pieces of furniture that have an unusual design and style are popular. By making a product from improvised materials, it can be given the most unexpected exclusive look.

Each part of the product is knocked down separately.

Independent production of home goods makes it possible to create an original design that fits perfectly into the interior of a particular room. If your own product turned out to be fashionable, reliable and beautiful, you can be proud of it, brag to your friends. Creating your own furniture sets is within the power of anyone who knows how to use carpentry tools at least a little and has patience. To create an original furniture masterpiece, it is enough to turn on your imagination, show a little perseverance and diligence.

Chipboard sheets are installed on top of the resulting frame, which are then pasted over with foam rubber and sheathed with fabric.

In a cozy home there is always beautiful upholstered furniture. The dominant place, as a rule, is occupied by a luxurious sofa. Family members spend a lot of time on it. Here they play with children, sleep, arrange gatherings with close friends. Before producing your own sofa, you need to understand well which type of sofa will best meet the needs of all family members.

The most popular products are:

• corner;
• book;
• dolphin;
• with folding mechanisms.

A similar frame is mounted for the seat

This can also be attributed to the ottoman. This product is extremely simple. It does not have any folding mechanisms. Therefore, making an ottoman with your own hands is not difficult. It is advisable to choose a future bed, taking into account the place where it will be installed. Before starting work, you should take the necessary measurements, make preliminary drawings.

Carpentry rules

The corner bed looks more prestigious than the usual folding version. If you are doing this work for the first time, it is better to make the simplest craft that does not have any additional shelves and drawers. When assembling the frame, do not try to make tenon joints at the ends of the boards. Such work is carried out only by professional carpenters. Individual elements nailing is not recommended. Since the assembly is constantly loosened, over time the nails begin to loosen the fastening. It is better to use self-tapping screws or screws.

Now there are a large number of such materials on the construction markets.

From natural wood, coniferous species should be preferred. Their fibrous structure is saturated with resin, which protects the tree from decay processes. Thanks to this, pine products have a fairly long service life. Before starting the assembly, the finished elements must be carefully sanded. This will provide the necessary security for further work. It is desirable to cut materials outdoors, since a large amount of wood dust is released.

From simple elements, you can make furniture that will easily fit into any interior.

The frame is the main part. All other details are attached to it. When assembling the seat, you need to check the box for matching diagonal sizes. The correct shape of the box ensures the stability of the entire frame. All connections should be checked before sticking upholstery. If any joint staggers, it should be reinforced with additional screws or metal corners.

M ebel, especially soft, not cheap pleasure. And not always in the store there are models suitable in size or design. In addition, if you, for example, want to furnish country house, where special delights are useless, spending a lot of money is simply not businesslike.

The way out is to master the basics of furniture business and make the desired item yourself. In doing so, you will get quite tangible benefits:

• Saving money on furniture.
• Save money on furniture repairs. If you learn how to make new furniture, repairs will not be difficult.
• Finally - win a bet, arguing that you can make upholstered furniture yourself, literally "on your knee"!

Base of upholstered furniture - pillow

soft elements modern furniture sometimes they represent complex multilayer structures made of fabric, nets and springs. To independently make such a mattress or seat is a little real task.

However, it is easy to make quite comfortable pillows for a sofa or chair yourself from a thick foam plate.

In addition to foam rubber, we need two types of fabric and a zipper. We take a natural fabric or with a minimal addition of synthetic fiber to avoid harmful electrification.

At first sew inner cover leaving one of the ends open. Any non-dyed dense fabric such as calico is suitable for it. We put the cover on the pillow, turn it up and sew up the open side with large stitches. The cover should tightly fit the foam rubber, protecting it from wear and tear.

Now sew an outer cover. It provides an attractive look to our pillow and protects it from soiling. To be able to remove the cover from the pillow, we sew a “zipper” on the side. When cutting, we make the dimensions a little larger than necessary, taking into account the possible shrinkage of the fabric during washing.

By laying several of these pillows on a simple frame or even just on the floor, we get a soft bed, ottoman or sofa.

Making a soft stool with your own hands

The basis for the soft part is a wooden base. Let's study the basic operations for its manufacture, using the example of a stool with a soft seat. Despite its simplicity, its assembly uses the same principles and techniques as for the manufacture of much more complex types furniture.

From the tools you will need:

• a hacksaw for wood with a small (1.5-2 mm) tooth;
• curly screwdriver (cross);
• hammer;
• awl;
• tailor's scissors;
• needle with thread;
• sharp knife (mounting with a replaceable retractable blade is suitable);
• pliers;
• drill or wrench.

We put a soft pad on the seat, pull the cover, we wind its edges from below under the seat and shoot with staples.

The stool is ready. Now it is desirable to make thick rubber pads on the lower edge of the legs. You can buy suitable fittings in a furniture store.

The soft part itself can be framed along the edge of the plastic seat edging tape or cord, nailed with decorative carnations.

Unleash your imagination, and according to this principle, you can make the most bizarre and unusual furniture items.

Making more complex upholstered furniture with your own hands

Having mastered the basic operations of manufacturing upholstered furniture using the example of an ottoman, you can move on to more complex products.