Creative ideas from plastic bottles. Crafts from a plastic bottle for school, kindergarten. Master classes, step by step instructions, photos. Bird feeders and nests

Plastic bottles have appeared for a long time and, in addition to their direct purpose, are used for a variety of purposes. Due to their durability, bottles are widely used in the country, where they are used to make crafts, vases, furniture and even greenhouses. Fantasy is not limited by anything - after all, the sizes and shapes of the bottles are varied, they bend and cut easily. Bright plastic figures will decorate the summer cottage and reduce the amount of garbage.

General principles for working with plastic bottles

If there is a desire to decorate the cottage with crafts from plastic bottles, you need to collect a lot of them: you will need both ordinary ones from water or lemonade, and denser ones from shampoo or dish detergent. You can take large five-liter and small half-liter bottles - everything will go into business.

Instead of throwing plastic bottles in the trash, you can use them to decorate your summer cottage.

First, the plastic must be thoroughly washed with soap or dish detergent. It is good to do this by soaking the containers in a large bowl of hot (60-70 ° C) water and then rinsing them out of the hose under strong pressure.

To cut out some details, you will need sharp, durable scissors or a knife. To decorate the bottles, you will need waterproof, quick-drying paints:

To make the paint fit well on the plastic, you can use:

nylon brush (hair stripes may remain, you need to paint at least two layers);
foam sponge (wetting movements, also covered in two layers).

Plastic bottles from a can of aerosol paint are best stained.

Making a playground with crafts from plastic bottles

If the garden plot is large and it is possible to organize a playground on it, plastic animals, birds and fairy-tale characters will perfectly fit into its design, because the figures will be bright and durable. Cunning cats will chase nimble mice, gnomes will look after the plantings, a red fox will settle next to a cowardly hare, and an elephant near a fence with bright sunflowers. Bees, unlike real ones, will not sting, and the bull will butt. On the playground with such figures, children will have fun and interesting.

Photo gallery: figures from plastic bottles for a playground

To make funny gnomes, you will need not only bottles Children will not sit in such a train, but toys will be able to ride Cute bottle cats will decorate any playground Bottle mice are well suited for small flowers or greenery
For crafts, you can also use tight bottles from under detergents A touching baby elephant with a flower in its trunk looks beautiful against the backdrop of sunflowers The frog princess and her friend the frog are comfortably nestled among the green grass With the help of gray, black and white paint, funny bunnies and mice are obtained A cunning fox can be planted in a flower garden plastic bottle not scary at all. If you apply a little imagination, on the usual suburban area exotic penguins will settle down Children will be interested in the playground with the characters of their favorite cartoons

How to make a bee from a plastic bottle

It is no secret that children are often afraid of flying and buzzing insects, although in most cases bees, beetles, wasps fly about their business and do not touch anyone. In addition, they bring considerable benefits to the garden, pollinating trees and shrubs. To make small summer residents less afraid of bees, you can make them from plastic bottles. The smallest will do, from 300 ml to 0.5 liters. Procedure:

Pour yellow paint into a clean bottle (about a third).
After pouring the paint into the bottle, you need to carefully screw the cap and shake
After screwing the lid on carefully, shake and turn until the paint covers the entire bottle (if it doesn’t work, you can add more paint).
Stick black thin tape on the strips of the bottle (several rows).
For strips, use thin black tape.
From a clean bottle, cut out two wings and bend the tips with corners in the place where the wing will be attached to the bee.
To make the wings even, it is better to use a stencil
Insert the wings into the slots on the back.
In order for the wings of the bee to hold well, it is necessary to bend the corners at the tips
Draw a muzzle on the lid with a thin brush and paint or varnish.
The muzzle of the bee must also be drawn with indelible paint

Decoration of a recreation area with plastic bottles

Gardeners are hardworking people, but sometimes they also want to relax. Relaxation corners are usually designed with special care: after all, you want it to be beautiful and cozy. As items landscape design You can use crafts from plastic bottles. In the relaxation zone, you can place unusual animals and birds, artificial flowers and palm trees, colorful flower beds and even a plastic house.

Photo gallery: crafts from plastic bottles for a holiday corner in the country

It’s not difficult to make such a hedgehog, you just need to wrap an old bottle with a net and fill it with earth An old broom plus a five-liter painted in bright color - that’s the hive for plastic bees. If you make a house out of bottles and cement, it will be quite strong To lay out a whole wall of bottle caps , it will take a lot of time Simple, but bright vases from bottles can be placed on the porch or veranda Inedible, but very bright fly agaric attract attention With the help of red and black paint, you can lay out a bright flower bed from plastic bottles Palm trees do not grow in our area, but why not arrange imagine a paradise island with the help of skillful hands?

How to make a bird out of plastic bottles: ideas and instructions

To decorate the recreation area, you can make very beautiful fabulous birds: a swan, a peacock, a firebird or a flamingo. The basis for all birds is the same, only the color of the feathers and the shape of the head and tail are different.

Photo gallery: birds from plastic bottles

A cheerful cockerel, of course, will not wake you up in the morning, but it will create a great mood for the whole day Romantic swans in the pond are a real masterpiece of plastic art Hunting lovers will surely like the capercaillie Pink flamingo looks very bright in the middle of green grass

For the manufacture of birds, you will need bottles of different sizes: large five-liter and liter ones, as well as wire, corrugated pipe, metal-plastic pipes or rods for legs. It is important to thoroughly wash, degrease and paint all parts before starting to assemble the bird, since this cannot be done in finished form. Procedure:

Photo gallery: feather options for decorating a bird from a plastic bottle

To cut such feathers for a swan from a plastic bottle, it will take a lot of time. For a chic peacock tail, the feathers overlap each other. To make a plastic multi-colored parrot, feathers will need to be not only cut, but also painted. plastic bird more like the original

Video: plastic bottle swan

Plastic flowers are not a replacement, but an addition to real ones

Both real and artificial flowers will harmoniously look in the rest corner. They will last a long time and save money on arranging a summer cottage.

Making chamomile from plastic bottles: a master class

One of the most popular flowers in Russia - chamomile - is easy to make from white plastic bottles and wire. Procedure:

Cut the bottle into two parts: straight and tapered.
Two or three more bottles are also cut into two parts and cut off the necks.
For the middle of the chamomile, use a yellow or orange cover.
Pass the wire through the bottom of the chamomile, securing it through the lid.
You can cut the petals out of a green bottle and attach them to a wire stem with thin wire or a lighter (if you heat the plastic leaves, they will firmly attach to the stem).

Video: chamomile from a plastic bottle

Among the plastic flowers there are also guests from hot countries, for example, lotus, and lilies of the valley familiar to us, as well as bright tulips, colorful asters and fabulous flowers that do not have "prototypes" among the real ones.

Photo gallery: flowers from plastic bottles

Until real tulips have blossomed, you can decorate a flower bed with plastic ones - you can’t distinguish them in a few steps You can make a lily of the valley from milk or kefir bottles Bright sunflowers will create a sunny mood on the site Red and white bells are in harmony with brick wall Houses
Plastic lotuses in a vase will serve as a wonderful decoration for a summer cottage

Bright crafts from plastic bottles are not only decoration. They help brighten up leisure time in the country, save the family budget, unite the whole family for creative work and reduce waste.

Surely the inventors of plastic bottles had no idea how widely people would use them. Today, craftsmen have learned how to make a huge number of useful things from plastic bottles with their own hands, from toys to a boat or a house. We will confine ourselves to considering crafts that will help you beautifully decorate your site, garden or vegetable garden.

Unusual qualities of homemade plastic bottles

Plastic bottles are extremely popular among lovers of garden crafts. The explanation for this is simple: on the one hand, the material is easily accessible, on the other hand, it is easy to work with. No wonder there are a huge number of women among the admirers of the "genre".

Note that plastic containers decompose as garbage for an extremely long time, but endlessly serve in the rain and sun in the yard. It's nice to make something funny and useful out of what was supposed to be thrown away. The presence of numerous interesting examples further provokes creative and inventive souls to create something better and more unusual.

Plastic bottles have many colors, crafts from them can be painted and enriched with a variety of decorative elements, which most often is also an improvised material. The use of both small and large empty bottles from 0.5 to 5 liters allows you to create the most different combinations figures. The author of the text sets himself the task of offering you the most interesting examples and acquainting you with the methods of working with plastic bottles with your own hands using several descriptions as an example. Thus, you can both pick up interesting and beautiful homemade products for repetition, and learn how to implement your own ideas.

Please note: it is very important to choose a place for the figurine in the garden where it will harmoniously fit into the surroundings.

Bright crafts and decorations from bottles in the yard

Such poppies always bloom, and they won’t be fined for it.

Most bright decoration in the yard there are flowers. From plastic containers, they turn out great and a considerable number of examples have already been invented. Do you want to build a tree from bottles with your own hands? It's possible!

Winter and summer one color

Probably the easiest plastic bottle crafts to make are mushrooms. Do-it-yourself mushrooms are made extremely simply and very similar to real ones. The mushroom cap is the bottom of the bottle, its stem is the top of the container. You can color them as you wish. It is most convenient to fasten both parts with a self-tapping screw.

To get the characteristic protrusions on the stem of the fly agaric, you can use two bottle necks to make it. Grass can be created from the side of a green container.

In this lake, the water never freezes, and swans always live

The blue lake in the yard is most realistic to arrange from plastic bottles. Its surface, even in the absence of wind, is covered with characteristic ripples. Making such a pond is easy. You need to paint at least 100 bottles of blue paint from the inside, and then bury them in the ground with their neck down. Flowers and flowers are suitable for decorating a pond.

Funny figurines of animals and people for the garden from plastic containers

We are all happy to decorate our garden with crafts of animals, gnomes and people. A considerable number of various figures for the site have already been invented. Interestingly, even when copied, each creative invention has features brought by the author. Nothing prevents you from leaving your “own mark on history” by inventing an original gnome.

All sorts of different animals in the yard and garden

Here are several options for turtle designs. All of them are made from the bottom of a bottle, which resembles the shell of an amphibian. Using paint and other decorative elements, you can create a turtle with a "own face".

The caterpillar in the garden and the garden is quite appropriate. In this performance, she will not turn into a butterfly, but she will not be able to harm either. You can make an insect from the bottoms, lids and bodies of plastic containers. The easiest way is to sequentially collect the top parts of bright green bottles. Inside there may be a wire that is bent on both sides of the figure.

Funny gnomes for the courtyard can be made from a variety of containers. Perhaps, it is impossible to do without the use of paints. A special place in the performance of the gnomes is occupied by decor: let your imagination run wild and try to use everything that comes up. This is exactly the case when you can compose something unusual and your own.

The land with the help of horses in the country has not been plowed for a long time, but the presence of their figures is appropriate and desirable. The body of the horse is most often made from five-liter eggplants, and the legs, neck and muzzle are made from smaller containers. The horse is very similar to the donkey, so when making it, you can use the donkey assembly instructions that follow.

Pigs in the country from plastic bottles - a classic of the genre. Of course, a 5-liter container is best for making a well-fed pig. It is often used as a planter. The techniques for assembling a pig are exactly the same as for a donkey. A description of this follows.

A bright spot on the site will be a fox or bear figurine covered with orange paint. We have already understood that large five-liter bottles are well suited for both the already mentioned and other animal crafts. Here again, fantasy and scenery are required. Assembly - all the same donkey making guide that follows.

It can be said with absolute certainty that it will be possible to build any animal from plastic bottles. Pick your favorite and get creative!

Here are a few more examples of the use of plastic containers for the manufacture of animals. Frogs, hares, bears and sheep - everything is like in a real forest.

Hunting trophy from a plastic container

If you are unable to hunt even with a camera, you can hang a hunting trophy from a plastic canister in your country house. In addition to the container for making a horned head, you will additionally need 30 pieces of multi-colored plugs, a piece of wire with a diameter of 3 mm and self-tapping screws.

Hunting trophy assembly instructions:

Funny donkey from plastic bottles for your garden

As follows from the pictures, donkeys are slightly different. I came up with my own collective image and prepared a master class for you:

To assemble the craft, we prepared 8 bottles. Subsequently, another one was required, Brown, for making animal mane.
At a 5-liter eggplant, the neck was cut off and the caps of the foot bottles were screwed on with screws. By turning the screws in different places, you can adjust the inclination of the plugs. It is necessary to use at least three self-tapping screws to fix one cover.
At the container for the head, cut off the neck.
Cut out a blank for the donkey's neck from the middle part of the bottle. In side view, it has the shape of a trapezoid. On the sides of the part, we leave two ledges for which the neck will be attached.
We fasten the neck to the head with two self-tapping screws. They will be inside the body.
We bend the neck to the head and fasten the parts with another screw.
Now we fasten the neck to the body with two self-tapping screws. They will be inside the body.
We turn the neck to the body and fasten it with two more screws from the bottom.
This is what the frame of the donkey looks like at this stage.
Cut out the blanks of the ears from the green bottle. For one ear, you need a quarter of a bottle cut along. In the lower part of the ear, we cut the protrusions for attaching to the head, in accordance with the image.
We bend the sidewalls of the protrusions so that they pass into the narrow slots prepared in the head.
We mark the slits on the head with a marker in accordance with the size of the ear. Their size should correspond to the width of the protrusions on the ear with curved edges. We make cuts.
We insert the protrusions of the ear into the slots on the head of the donkey. After installation, the bent parts will straighten out and securely hold the ear on the body of the animal's head.
This is what our ward looks like with ears. Paint it with gray paint and leave to dry overnight.
Cooking a donkey's mane from a brown bottle. The length of the workpiece corresponds to the length of the neck. To attach the part to the neck, cut out three protrusions in accordance with the image. We imitate hair by cutting through the part with a step of 2mm and not reaching its edge by 15mm.
We bend the edges of the protrusions for subsequent fixation to the neck. We make two blanks for the mane.
On the neck we mark three slots with a marker in accordance with the location of the protrusions on the details of the mane. Their width should correspond to the size of the protrusions on the details of the mane with curved edges. We make cuts.
We bend the edges of the protrusions on the details of the mane and sequentially insert them into the slots on the neck of the animal.
It is convenient to make a harness and a donkey's tail from a garden border tape. From it it is necessary to cut off a strip 15 mm wide and fasten the crafts to the body with five self-tapping screws. The eyes will fit from an old toy. We fasten them with double sided tape. We paint the muzzle and ears from the inside with white paint. Nostrils and mouth are done with red and black paints.
You can harness! We use a plastic box as a cart. The wheels are good from a used children's toy. They can be mounted on the axis of the welding electrodes. Shafts are made from thin branches. For good stability in windy weather, sand should be poured into the bottles of the donkey's legs.

Do-it-yourself handmade is sure to come in handy on the farm

Our articles about useful homemade products for your own yard from plastic bottles

You can read the topics or in our articles. Here is a list of a few more articles about useful country products:

Interesting examples of creations from containers for household purposes

As you can see, quite monumental structures can be built from plastic bottles. However, many of us, having appreciated the scale of the work and the large number of bottles, are ready to say the words from the old joke: "I won't drink that much." It is up to you to decide which homemade products are good, and we offer a master class on making a prosaic broom from plastic bottles with your own hands.

Step by step guide:

Collecting crafts, we set the task of using fewer bottles and getting a panicle of sufficient rigidity. However, it was not wide enough. To solve this problem, the entire length of the bottle should be used for blanks.

In this case, containers will need twice as much. In this embodiment, to ensure sufficient rigidity of the broom, it will have to be tied with twine, as in the photo.

Together with the broom, we made a dustpan from a plastic container. To implement such an idea, it is better to use a thick plastic canister. We cut out the part in accordance with the image, put it on wooden handle and get the scoop. The scoop does not dig the earth, but it is suitable for sand and cement and works in tandem with our broom!

CRAFTS FROM PLASTIC BOTTLES FOR THE GARDEN (LESSONS WITH PHOTO)

In this article, we will share with you . You will learn how to decorate flower beds and make beautiful flowers with your own hands. palm trees from plastic bottles, and also - beautiful animals from this unnecessary material. Simple and intuitive master classes with a photo sequence of work steps will help you make amazing plastic crafts for the garden! Hooked on . Take advantage of some of them:

- bright garden paths that can be made from sea pebbles, from multi-colored paving slabs, in the form of paving stones with green grass breaking through between it, from silvery large and small gravel or rounded saw cuts of a tree. Pay special attention to the fact that diverse paths throughout the garden plot will allow you to divide its total area into interesting thematic zones - a garden, a kitchen garden, recreation area, playground and barbecue;

- solar-powered mini flashlights - the simplest and most inexpensive option decorations that give comfort to any personal plot. They absolutely do not require any professional installation, unlike other expensive options. street lighting. Since they are cordless, they only need to be stuck into the ground or along garden paths or in flower beds. Also for the garden you can do your own crafts in the form of decorative lanterns from a plastic bottle ;

Beautiful hanging planters, all kinds of flowerpots , design flower pots can be moved within holiday season. The garden plot will always look new if you make such decorations for the garden with your own hands. Pots are best placed in the barbecue area, on the veranda or around the playground. Use old waste boxes, multi-colored plastic bottles, barrels, watering cans and other items that you would never need and that you want to throw away as decorative containers. Give them a second life by decorating your garden with DIY crafts;

Hand-made wattle fences look great along the paths of the garden. From can be woven from willow or hazel. On such wattle fences, as a rule, they like to hang beautiful old earthenware jugs and pots as decoration for the garden. Planted decorative sunflowers will look great next to such a wattle fence;

The country furniture always creates a unique cosiness to any corners of a garden. Plastic bottles can also be used as a material for making garden furniture (in the previous tutorial we showed you how to make a durable sofa out of large plastic bottles). ). Wrought iron benches, wooden seat chairs and tables are currently the most popular. When choosing furniture, pay attention to the fact that the legs have special tips so that they do not fall into the ground. Perfect for summer patios wicker furniture from wicker and rattan. Great for our latitudes larch and teak. All unpainted furniture must be pre-coated with special compounds.

Crafts from plastic bottles for the garden become a real gem of it. Avid summer residents spend all their free time in their favorite areas. To make it more original and beautiful, it is not at all necessary to run to the store for newfangled garden figurines or expensive materials. The easiest thing to craft is a used plastic bottle. To implement your ideas, first read the helpful tips.

What you need to start making DIY crafts from plastic bottles for garden? You will need - a precious plastic bottle, scissors, plastic paint and wire. The main thing is not to be afraid to fantasize to make crafts from used plastic bottles for the garden. Can involve children in the manufacture of such crafts . This can be a fun family activity together.

Crafts from various plastic bottles for the garden are the most budget option and plastic will last at least 3 years.

Crafts from a plastic bottle, as seen on the picture, can be placed on the playground: make a palm tree out of plastic bottles or flowers, put a plastic peacock, hare or other animals.

There are ideas for a variety of crafts from a plastic bottle. This can be seen in the photo - flowers, birds, animals, toys.

PALM FROM PLASTIC BOTTLES OWN HANDS (MASTER CLASS WITH PHOTO)

Plastic bottles are an excellent material used in home garden crafts. They can be from ordinary water or carbonated drinks. You can also use plastic from under detergents and shampoos, giving him new life. No need to treat it like useless trash. Indeed, from plastic, practically from nothing, you can make useful and interesting things for a summer residence, a garden, toys for children. Below you will find information with which you from plastic bottles you can easily make a beautiful palm tree with your own hands. If you make 5-8 of these palm trees and decorate your garden with them, then your site will look very advantageous and exotic compared to others!

As we already told you in one of our materials, if you have a huge number of bottles of the same shape and size, it is quite possible to make country furniture . It is very easy to fasten 15-20 bottles of 1.5-2 liters with adhesive tape and thereby get the basis for a pouffe. It can then be covered with a beautiful fabric, making a soft foam seat.

A palm tree made of plastic bottles will show off at their summer cottage or in the garden all year round. She is sure to brighten up any household plot.

How make a palm tree out of plastic bottles ? Photo with the stages of work should encourage you to do this (see below Master Class). In order to make your own garden products in the form of a palm tree, you will need some simple materials. Of course, these are plastic bottles, which are the main material.

For the trunk of a palm tree from plastic bottles you will need to stock up on 10-15 plastic bottles. Their capacity is one and a half to two liters. Depending on the height of the palm tree, a different capacity of bottles is taken. With a palm tree height of 15 plastic bottles, two-liter containers should be used. With a height of 10 bottles, one and a half liter bottles are used. Brown must be taken. plastic bottles to make a palm trunk out of them.

For the crown of the palm tree, green plastic bottles will be needed. The more bottles, the more longer leaves palm trees, and it will look more natural.

In order for a plastic palm tree to be reliable and durable, for its base it is necessary to choose either a strong and thick willow rod, or a thick metal rod.

Tools needed to make DIY palm trees from plastic bottles:

an awl or drill to make holes in the bottles;
large scissors or a well-sharpened knife.

The sequence of steps for making a plastic palm tree:

to make a palm tree trunk, you first need to cut brown bottles 10-15 centimeters high. For this, the bottom of the bottle with the bottom is best suited. Tops can also be used. This is also a good option, because in this case it will not be necessary to make holes;

when the necessary plastic blanks will be made , teeth are cut along their edges with scissors or a very sharp knife. They need to be bent a little in order to give the palm tree bark from plastic bottles a natural and natural texture;

for the crown of a palm tree, green bottles are taken from plastic bottles. They cut off the bottom. On the very first blank, it is necessary to leave a neck with a lid. In the future, in the process of assembling the entire structure of the palm tree, it will serve as a good fastener. The necks of the remaining blanks must be cut off;

to make leaves from blanks, they must be cut out, but at the same time not reaching the edges of about 5 centimeters or more. Next, the leaves must be fixed by screwing the lid;

the next step is drilling holes to connect all the prepared parts.

Such a hole, which serves as a connection, must also be made in the lid - fastening the crown of a palm tree. Pay special attention to the fact that the size of the connecting hole is in direct proportion to the diameter of the base rod. A red-hot awl or drill will become you good helpers in that;

the last stage is the collection of a plastic palm tree with your own hands. It is necessary to plant all brown plastic blanks on a securely fixed rod, and fix the crown, which was prepared from green plastic bottles, on top.

The palm tree is ready. Now think about where to place it in the corner of the garden so that it looks the most impressive. But it is better to make several of these palms, install them side by side and plant green spaces around them.

HOW TO MAKE A PLASTIC BOTTLES FOR COTTAGE OR GARDEN

What can be done from plastic bottles to decorate the garden? Next, we will consider options with a photo of how you can make a decorative flower bed with your own hands.
Have you ever thought that the garden is a real creative territory? And this is not at all because its diversity consists only of growing a variety of fruit trees, flowers and shrubs. Your unlimited fantasies and peeped ideas from other gardeners and summer residents will turn the territory of your garden into an original and unique look.

From plastic bottles you can create for giving and useful little things, and landscape works, including palm trees, flower beds, gazebos, supports for greenhouses and canopies, frames for climbing plants and so on. To do this, it is only necessary to collect a sufficient number of the same type of plastic bottles. Palm trees from plastic bottles for any garden will become its real decoration.

But what, besides palm trees, can still be made from this waste material for decoration your garden? An easy option is a gazebo made of plastic bottles. Or rather, the basis of its design. Since the fastening of the gazebo must be rigid, small screws must be used. If you have a design with one-piece bottles, then they must be filled with sand so that they are stable. Please note that in case using plastic bottles as a frame (the base of the canopy, for example) you should not overload the structure too much and use only light fabric and film.

Summer residents have been using plastic bottles for growing seedlings and decorating flower beds for a long time. They serve as an excellent container for it. Very original idea is the manufacture of them outdoor washbasin. Nothing complicated - just hang upside down a plastic bottle with a cut base, pour water into it. The lid serves as a tap, which you only need to turn a little so that water flows.

A modernized similar version of the outdoor washbasin is the following - a plastic bottle is hung upside down. Make a small hole in it. To supply water, you need to slightly unscrew the lid and let air into the container. In the same way, you can build a real shower. To do this, you need a plastic bottle with a large diameter. Several holes are made in the bottom of the bottle, like a shower.

Flowerbeds made of plastic bottles for the garden are quite common among amateur gardeners. They just dig into the ground, representing a small fence.

In addition, you can make a variety of pots of different sizes and shapes. , depending on the plastic containers used. So, for example, small bottles can be used for table and hanging pots. Try to cut off the bottom of the bottle, and you immediately get a cylindrical planter . If only the top of the plastic bottle is used, then get a cone-shaped pots . Similar pots can be decorated with colored corrugated paper, cloth or tie with yarn. A simple option for decor will be painting with paints. Inverted plastic bottles with a capacity of 5 liters will serve perfectly as decorative flowerpots.

The fantasies of summer residents are irrepressible, and they build palm trees from used plastic bottles for your garden. From brown and green plastic bottles for giving, you can make real beautiful decorative palm trees.

ANIMALS FROM A PLASTIC BOTTLE (HOW TO MAKE A HARE OR A PIG WITH YOUR HANDS)

Summer residents are very fond of decorating their personal plots with all kinds of garden figurines made of clay or gypsum. To the territory garden plot has become original, it is not at all necessary to go to an expensive store to buy decor. Plastic bottle animals, which you can see in the photo, can be easily done and with my own hands. This type of decoration for the garden is also very practical for the backyard, because the plastic is resistant to both rain and sunlight.

After reading this manufacturing review, you will learn how to make various animals from an ordinary plastic bottle (see photo with work steps). In fact, making a hare or a pig from a plastic bottle with your own hands is not at all difficult, and after reading the material, you will see it!

Plain plastic bottles can serve as a source of inspiration for creating mini-masterpieces, and not just a constant headache for environmentalists. A variety of plastic figurines of animals or birds can be made together with children, including their own and children's imagination. For this, all you need is a plastic bottle, cardboard, glue, scissors, markers and acrylic paints (you can use spray paint).

To make animal figurines (hare or pig), you can take any plastic bottles you have. invent interesting ideas and choose which animal you like best. We suggest you make a cute pig out of a plastic bottle. In finished form, it is shown in the photo.

To begin with, carefully prepare the plastic bottle for work. The label must be carefully removed from it, and then washed.
Well, now let's get back to making crafts. . Cut out ears, tail and paws from cardboard. Glue all the cut parts of the animal to the bottle. Take pink paint and paint the resulting blank from a can. Let's let the paint dry. Now the fun begins. After drying, draw with markers the eyes, snout of the pig and the mouth. You can also use another option - pre-cut these details from colored paper or paint and then stick on the bottle.

Sounds funny but a pig made from a plastic bottle and flaunting in the photo, has become a real, as they say now, fashion trend in recent times. We can say that now there are a lot of piglets.

It is clear that thanks to different imaginations, various interesting crafts are obtained. It can also be cute little pigs made from small bottles. These are real wild boars or sows from huge plastic bottles. Some are trying to copy Piglet. Some people have such a fantasy that they create entire plastic pig farms on their personal plots.

On this, of course, the topic of all kinds numerous figurines from plastic bottles cannot be exhausted. There are still many kinds of animals that can be made with a used plastic bottle.

And such an animal can be a hare from an ordinary plastic bottle, which you see in the photo. It can be made for giving different ways. This will depend on the shape of the bottle you take and the very idea of \u200b\u200ba decorative garden hare.

To make the simplest method hare from an ordinary plastic bottle as shown in the photo, you will need: plastic bottle, acrylic or spray paint, brush, scissors, hot glue, sand and cardboard.

Note that if you are making this figurine for a child, and not to decorate a personal plot, then take a small plastic bottle. The bunny will turn out cute and very neat. But voluminous bottles are great for making garden hares.

The sequence of steps for making a plastic hare:

carefully clean the plastic bottle from the label;

Cover the cleaned bottle with spray paint and let it dry;

After the spray paint has dried, fill the plastic bottle with sand. This will give it good stability;

Carefully draw the muzzle and paws of a hare on a plastic bottle;

It is necessary to cut out ears from colored cardboard, paint them also carefully with paints and hot glue;

If the hare is intended for the garden, then his ears will also be plastic. They are cut from another prepared plastic bottle. In this case, you can only paint with spray paint. Details are drawn with acrylic paint;

at the last stage, the ears are glued with hot glue.

Here is another way to make a beautiful funny hare from a plastic bottle with your own hands. To do this, you will need the simplest things - sand, two used plastic bottles, acrylic primer or acrylic paints, a brush and scissors.

The sequence for making a hare with this method is the same - we thoroughly wash plastic bottles, cleaning them of unnecessary labels. One of the blanks must be filled with sand for stability. From the second plastic bottle we cut out the ears and bangs of the bunny. Do not touch the top of the plastic bottle with the cork.

We cover with acrylic soil all the prepared parts of the garden bunny. In this case, the paint consumption will be less. Let the well-applied primer dry. After the soil has dried, we draw a hare's shirt, a butterfly and its muzzle on the main plastic bottle. In general, we create its image at your discretion.

As a result of such individual approach and get such funny and unique bunnies. Ears will be better painted with silver paint. Cork is usually painted with golden paint. In the place where the bangs will be, make an original fringe with scissors. After the paint has completely dried, carefully combine all the prepared parts. Your hare is ready and waiting to take his place of honor in your garden!

As you can see, making a flower bed, a palm tree or any animals from plastic bottles is not at all difficult! Fantasize yourself, do not be afraid of anything, take and process existing ideas, engage in real creativity and then yours will acquire its original unique look!

Plastic bottles are a real find for people involved in creativity. Even beginners with no experience can independently make a variety of crafts from this material. Recycling plastic not only makes the raw material practical, but also saves the environment, enhancing the ecology. Unusual ideas With step by step description will help to make crafts for decorating the garden and decorating the summer cottage.

Original ideas for crafts from plastic bottles to the garden step by step

Plastic bottles are considered affordable raw materials; making funny figurines does not require creative skills. As additional tools, you need scissors, paints, a clerical knife, as well as other improvised materials. To get beautiful crafts, it is recommended to stock up on others plastic products- cups, plates, spoons.

Flowers: how to make an open bud

Buds of daisies, roses, bluebells and lilies of the valley - all this can decorate the garden space without much effort. Large flowers made from five-liter plastic bottles look great. To get started, you need to prepare the bottoms of the bottles, scissors, and acrylic paint. The step by step process looks like this:

The bottom of the bottles must be cut along lines that are clearly visible. The incision is not made completely, 2-3 cm remains in the middle.
From each petal, you need to cut 1-2 thin strips and twist them beautifully towards the center.
Fire is used to shape the flower. You can take matches or a lighter: the bottom of the bottle is brought to the fire and turned in the right direction. The bottle begins to melt, taking on a different shape.
At the final stage, the product must be painted with acrylic. You can use a brush or foam sponge - this way you will not see stains.

The photo shows that such products are suitable for decorating flat surfaces. You can decorate the fence with plastic flowers, lay them out in the garden near the house, and also equip them with a tiled path.

Palm tree - an exotic garden decoration

A palm tree made from plastic bottles will help to add a touch of the tropics to the dacha. It is not difficult to make such an object of garden decoration, the main thing is to follow the sequence of stages. First you need to prepare the materials: a large number of brown and green plastic bottles, a clerical knife, adhesive tape, a tube for decorating the trunk and a thick rope. The step by step tutorial looks like this:

Making leaves.
Creation of a trunk.
Assembly of all parts of the structure.

To make the crown of a palm tree, it is necessary to cut off the bottom of the green bottles, and cut the upper part into small strips and bend them in the other direction. The lid and neck do not need to be touched. Depending on the number of bottles, the palm tree will be thicker or vice versa. After that, you need to take brown bottles, cut off the bottom and make stripes from it towards the neck. There should also be a lot of bottles. To assemble the tree, a rope is tied to each lid, fixed inside. A palm tree will serve as an excellent decoration for an inconspicuous corner on the site.

Swan: we make out the zone of the reservoir

The white bird is the most common craft in garden plots. It is easy to make, and the output is an original figure. To get started, you need to prepare one five-liter bottle, as well as a knife, a mesh for decorating wings, putty. An interesting swan is created like this:

The side of a plastic bottle is cut off along the horizontal side.
A hole is made through the lid, a thick wire is inserted, bending it - this will be the neck.
To give the product round shape it is covered with sand.
They make a stand: putty is laid out in an even layer on polyethylene and waiting for solidification.
Small putty rollers are rolled into a tourniquet and shape the bird's neck.
Using a spatula, the material is applied to the bottle itself, making feathers.
Used to make wings metal grid- it is inserted on the sides and also puttied.

The swan will look beautiful if you draw eyes and draw feathers on the body.

Mumps: a simple master class

Another simple garden decorating tutorial is using recycled plastic bottles. The pig looks original if you organize a small flower bed for summer flowers inside. To make a pig, you will need one five-liter bottle, as well as a knife, spray paint, brush, pencil, wire, black marker, cardboard and plastic glue. You need to do the following:

Cut out the ears of a pig from cardboard, paint them with pink paint.
Leg blanks can be made from cut-off plastic floor tops. liter bottles.
In a five-liter bottle, cuts are made with a knife: for the ears, for attaching the legs and for the tail.
The wire is twisted convenient way inserted into the hole.
At the end, the pig is spray-painted in the chosen color.

You can put earth inside the pig and grow small flowers: for this you need to cut a hole below the ears, making an oval.

Minions: Making Cartoon Reality

Modern DIY plastic bottle crafts step by step for beginners involve making popular cartoon characters. These master classes are for children, so an adult will cope with the task without problems, connecting a child to the process. You can try to make a beautiful and funny minion:

You will need one or more (according to the number of minions) bottles of 1.5 liters or more.
There is no need to cut anything here, because the man himself has an oval shape, it is enough to depict the face of the minion as accurately as possible.
The top of the bottle is dyed yellow, the lower part - in a blue tint.
Eyes are drawn on a yellow background, like those of minions.

Several wires can be brought out of the lid - these will be funny human hair. Such figurines will decorate the garden and bring a touch of humor to the exterior.

Flowerbed: how to make the basis for growing flowers

by the most simple option making a garden bed will use a tire from a wheel. The output is a large flower bed in which you can plant flowering plants. To work, you will need a large number of small bottles of the same type, glue for plastic, a tire from a wheel. Paint may also come in handy if you want to change the color of the bottles.

The prepared wheel is installed in the desired location of the future flower bed or in the garden. The tire can be painted in any color, you can leave it black. Bottles are gradually glued onto the top of the wheel row by row. The neck of the flower bed will be a little narrow towards the top, so you will need to properly fill the earth for future plants. If you do not want to leave the bottles transparent, they can be painted in the selected shade before work.

Decorative ball - an original figure in the garden

In order to make a dense and openwork ball with your own hands, you will need to prepare several dozen plastic containers from under the water. It is advisable to take bottles with a volume of at least 1 liter. The basis for sticking bottles will be a ball of cement, it is not difficult to make it. To do this, mix water and cement with sand in a ratio of 1: 3. The process then looks like this:

All bottles have their bottoms cut off.
Each bottom is painted in a certain color, you can use several shades and make a rainbow ball.
When the bottoms are ready, they are attached to the cement base.
You can fix the products with strong glue or insert them into the cement while it has not yet hardened.

The output is an original and unusual ball that will decorate the space near the house. The sphere can be placed near the gate, and also made the center of the composition in the garden.

Sheep: how to do it step by step

To create a sheep, elongated bottles are useful. It is necessary to prepare the container:

1.5 liters - 4 pcs;
2 liters - 11 pcs;
1 liter - 3 pcs;
2 liters - 20 pcs. with shaped bottom.

You also need a bending wire, a can of white or gold paint. The tops with necks are cut off from liter bottles, one bottle is inserted into another. Process of creation:

Ears are cut out of a liter container and fixed with wire.
The torso and neck are made from two-liter bottles.
The head is fixed on the neck, the legs of the lamb are made from 1.5 and 2-liter containers.
For curly wool, lambs connect curly bottoms with a wire.

At the final stage, the sheep is collected and covered with paint. The eyes and nose are made from corks in a contrasting color.

Owl: decorating trees

To country house shone with new colors, it is important to properly decorate the courtyard space. Another idea for this is to create an owl figure out of pvc bottles. To do this, prepare 5 brown containers, tin lids, a transparent container, a glue gun, pliers, acrylic paints and threads. Instruction:

The bottom and throat are cut off, cuts are made along the edges.
The cut fringe is pulled together with a thread: the top of the bottle will serve as the head, and the bottom as the tail.
The remaining bottles are useful for making wings: they are cut into rectangles and painted white.
Using a glue gun, the wings are fixed to the base.
The eyes are made from tin caps - they can also be tinted and the pupils can be drawn.

The night bird will fit perfectly into the design of the site, it can be placed on a tree branch.

Peacock - an unusual solution for the site

Another colorful, but no less easy-to-make bird is the peacock. Its beautiful and colorful feathers will amaze guests country house, because the peacock will become the center of the composition. In order to make it yourself, you need to take pieces of foam - they will be the base and body. The rest of the elements are made from plastic bottles:

Feathers are cut out from containers of different sizes, after which they are painted with acrylic and glued around the perimeter of the tail.
Feathers in the form of a fringe can be made with thin scissors on a green bottle.
The beak is made from the upper part of the container by cutting out a triangle, fixed on the head with nails.
The paws are made from the tops of small bottles with necks and wire.

At the final stage, the bird must be collected: the paws are attached to the body, after which it is glued with feathers. Next, wings and tail are attached - the peacock is ready!

Donkey: do-it-yourself decorative figure

Continuing the theme of animals, you can make a donkey from bottles. It can be installed near fruit tree, arranging a beehive there. If desired, the donkey is used as a flower bed, attaching a cart of wooden branches to it from behind.

The body is made from a five-liter container, the front and hind legs are made from containers from kefir or milk. The muzzle of an animal can be made from a bottle-keg of beer or kvass. Ears are made of plastic or cardboard. The whole donkey is covered with gray spray paint, a braid is attached to the muzzle, a cropped bottle with earth is hung on the side and a flower is grown there. Another easy option self-manufacturing– application polyurethane foam combined with bottles.

Frog: composition for an artificial reservoir

A frog figurine will be appropriate where there are reservoirs or artificially equipped fountains on the site. It can coexist with a swan, turtle, fish, ships. All that is required to create is two two-liter bottles, in which the top is cut off. For work, only bottoms are needed. Paws are made from flat parts - cut out according to a pre-designed template.

The crucial moment is painting the frog. First, the background is tinted in green, this may require several layers. Then, with a thin brush, draw out the eyes, muzzle, draw the phalanges on the paws. If desired, the frog can be made a crown - it is also made from a plastic bottle. The neck is cut off, forming arrows, painted in golden color - the crown is ready.

The fantasy of gardeners does not end with the ideas listed - original crafts from plastic bottles to the garden are replenished with such workshops:

butterflies;
snowmen;
locomotives;
candies;
robots;
penguins;
cats;
dogs;
cockerels;
towers.

Plastic containers are distinguished by the fact that they do not rot after precipitation: the gardener can safely leave for the city for the rainy season without worrying about appearance products. To prevent the paint from slipping, after staining, you need to cover the figure with varnish. Such original and simple garden figures will delight the inhabitants of the site for many years.