Products from pvc pipes with their own hands. Crafts from plastic pipes for all occasions Products from plastic pipes with your own hands

With PVC pipes. But greenhouses and sheds are far from all that can be made from PVC and aluminum pipes with different diameters. Furniture, home decor items, organizers, shelving, even weapons are beautiful bows. different forms. People's fantasy is constantly being embodied in new PVC forms, and we have compiled a selection of the most interesting DIY projects for you.

Let's start with homemade furniture from aluminum and PVC pipes connected by fittings. There are children's furniture, and options for adults, cute designs that will fit into any interior, and shelving with lots of shelves.

DIY pipe furniture

1. Low table made of pipes and wood

Table made of pipes and wood

Here is a detailed video tutorial on how to make it.

2. Dining table

Dinner table

This table of three boards and metal pipes can be used as lunch. Note industrial style in room design. you can see the manufacturing technology.

3. Large rack made of pipes and wood

Storage rack

Shelving for a spacious pantry or garage - perfect solution to store all sorts of things. And durable and looks great. Read the assembly guide.

4. Shelving for the room

hall rack

TV, audio system, souvenirs and books - everything will fit on this homemade rack. Let's see how to make it.

5. Another rack

Shelving made of metal and wood

The shape of this rack is somewhat unusual, as if it was planned for specific items. Looks cool with paintings, figurines and other content. there is a list of building materials and a story about the manufacture.

6. Coffee table with glass top

Coffee table

The legs of this table are made of bent and painted PVC pipes. As for the countertop, you don't have to make it out of glass, but it certainly looks cooler that way. you will find the manufacturing manual.

7. Aluminum tube bed

Bed with aluminum tube frame

Large bed frame with canopy made of aluminum pipes and fittings. Manufacturing guide.

8. A simpler bed made of pipes and wood

Bed made of pipes and wood

This bed looks simpler, and it's easier to make it. You will need pipes, fittings, wooden "ribs" and a fabrication manual.

9. Canopy over the crib

Canopy over the bed

Anyone can make this simple PVC pipe canopy. It turns out a children's bed with a canopy of tulle.

10. Simple towel rack

Towel dryer

A few PVC pipes and fittings, and the towel dryer is ready.

11. Cute chairs for kids

Chairs for children

These cute chairs are quite possible to make yourself. Frame made of PVC pipes and seat woven from threads. How to braid chairs, you can see.

12. Simple chairs for hiking

Outdoor chairs

small comfortable chairs for the patio or hiking in nature. Bright furniture sure kids will love it. How to make such chairs, see.

13. Place to play

Place for games

For kids, you can organize a place to play with a PVC frame.

14. Bar counter in the style of a beach holiday

bar counter

PVC pipes painted to look like bamboo, various attributes like exotic masks and a thatched roof - this bar counter will be a great reminder of exotic hot countries and beach holiday. Read detailed instructions for manufacturing.

15. Simple and convenient drawing tablet

PVC tablet

This lightweight drawing tablet is great for homework. You do not need to attach paper to it - the album is placed on a special stand along the bottom edge of the tablet. How to make it, read.

Organizers and shelves

16. Desk Organizer

Simple Desk Organizer

20. Creative wine shelf

wine stand

If you need a stand for a maximum of four or five bottles, you can make such a PVC creative. And it's easy to do and looks great.

21. Laptop stand

Notebook Stand

Simple and convenient stand to work with a laptop.

Decorative interior elements and gifts

22. Cornice for curtains

Curtain rod

Nice cornice made of painted PVC pipes and decorative elements. More about manufacturing.

23. Dresser decoration

dresser decoration

PVC pipes, cut into thin rings, can serve as decoration for furniture.

24. Creative mirror frame

mirror frame

And again PVC pipes, cut into thin rings. Cut, arrange in the right order, glue together and admire the new frame.

25. Piggy bank

Piggy bank

This funny pig with a PVC pipe base can be given as a gift or kept at home as a souvenir. Here

August 1, 2016
Specialization: facade finishing, interior decoration, construction of dachas, garages. The experience of an amateur gardener and horticulturist. He also has experience in repairing cars and motorcycles. Hobbies: playing the guitar and much more, for which there is not enough time :)

Plastic pipes are an excellent material from which you can collect not only pipelines, but also all kinds of crafts. Moreover, working with them is quite easy and simple, not to mention the fact that this procedure is very exciting. As an example, in this article I will give 10 most interesting ideas for using plastic pipes.

Features of making crafts from plastic pipes

Plastic pipes and fittings (corners and tees) in the hands of the master turn into a real designer, from which you can assemble any frame structures. The only thing you need to pay some attention to is the choice of pipes. For example, metal-plastic is not suitable for these purposes, since its bending strength is very low.

Therefore, it is best to use the following types of pipes:

Before gluing the PVC pipe to the fitting, it must be chamfered to get rid of burrs that can scrape off the glue during the joining process.

Homemade options

Option 1: Laptop Stand

Let's start with the simplest, but nevertheless very useful product - a laptop stand. In the photo below we see how to make a PVC pipe stand.

So, the instructions for its manufacture are quite simple:

first of all, measure your laptop so that the stand fits perfectly;
then cut the tubes according to the dimensions obtained:

2 tubes should be about 5 cm longer than the depth of the laptop;
1 tube should be 2-3 cm shorter than the width of the laptop;
2 short tubes - the height of the stand rise depends on their length;

now glue the corners to the two long tubes and connect them to the short tubes, resulting in 2 L-shaped parts;
after that, glue the corners to the short tubes and connect the parts with the longest tube, which should be perpendicular;
then glue the corners to the two ends of the L-shaped parts, which will serve as limiters so that the laptop does not move out of the stand;
at the end of the work, the product can be painted in any color you like with spray paint.

Now it will be more convenient for you to work with a laptop, besides, you can put it on a bed or sofa, and it will not overheat.

Option 2: sled for children

Sledges made of plastic pipes are a more complex design, however, they are made in almost the same way as a laptop stand. That's why every craftsman can cope with the task.

To make a sleigh, you will need the following materials:

two pipes with a diameter of 40 mm;
tips for pipes 40 mm;
pipes with a diameter of 25 mm;
tees and angles at 90 and 45 degrees for pipes with a diameter of 25 mm.

Sledges are made as follows:

start by preparing the drawing. At the heart of the design, use any sled in the photo above. The main task of the drawing is to indicate the dimensions of all parts, which will simplify and speed up further work.;
then make skids from magpie pipes. To do this, mark the places of their bending with a pencil and heat it over an open fire, rotating the pipe along the axis. When the plastic softens, the ends should be bent so that the skids slide easily over the snow and do not burrow.
It is desirable to bend the skids not only in front, but also in the back. After that, plugs must be put on the finished runners;
now you need to assemble the upper part of the sled, i.e. frame to which the seat will be attached. The frame must have racks for connection to the skids.
This design is a rectangle with stiffeners in the form of jumpers. For mounting jumpers and racks, use tees;
if you go sledding Small child, also be sure to make a back. To do this, use short tube cuts and 45-degree corners;
when the frame is ready, you need to connect it to the skids. To do this, install it on the skids and markup, marking the holes into which the racks will be inserted;
now drill holes of the required diameter so that the racks can enter them;
after that, connect the runners with the uprights, inserting them into the holes until they stop. To fix the racks in the skids, use self-tapping screws;

at the end of the work you need to make a seat. For this you can use wooden slats, which are screwed to the frame with self-tapping screws or planks.

This completes the manufacturing process of the sled.

Option 3: shelving

Another simple and quite useful design in the household is a rack. It can come in handy in the garage, for storing all kinds of little things, in the country or even in the apartment, in order to conveniently arrange conservation in the pantry.

The manufacturing process of the rack is extremely simple:

start work by completing the drawing, indicating the dimensions of all parts;
then, according to the drawing, assemble the racks and tie them with jumpers using tees;
now install the rack and lay the boards on the lintels, which will serve as shelves;
if the rack turned out to be high, you need to provide brackets for attaching the structure to the wall.

Option 4: snowshoes

We figured out how sleds for children are made, now let's look at how to make snowshoes with your own hands from plastic pipes for adults. For this you will need the following materials:

2 pipes with a diameter of 20-30 mm, one and a half meters long;
a nylon cord 4-5 mm thick - 40-50 meters;
elastic band for fixing the foot.

The process of making snowshoes is as follows:

cut a piece 200 mm long from each tube;
mark on long blanks in the middle and heat them in this place over an open fire, for example, over a gas burner;

when the plastic softens, bend the pipes around a cylindrical object, for example, you can use a kettle for this purpose. Wherein in the process of bending, do not apply a lot of force, it is better to heat the workpiece again so that it does not crack;
reheat the resulting sock and give it an angle of approximately 120-130 degrees. Do the same with the ends of the pipes;

now both ends of the pipe should be connected. To connect pipes, you can use self-tapping screws;
after that, process the frame of the snowshoes with sandpaper so that the surface is rough;

now you need to weave a mesh of nylon cord on the frame. You can connect nodes according to the diagram above.

In the process of making the grid, you need to tie a jumper to the snowshoes. When the product is ready, tie elastic bands to secure the snowshoes to the leg.

The size of snowshoes depends on the size of your foot. With a foot size 42, a snowshoe with a length of about 60 cm and a width of about 25 cm is sufficient.

Option 5: catamaran

lovers active rest in nature, it can be recommended to make a homemade catamaran from plastic pipes. This design is based on external sewer pipes of large diameter. Their length should be about two meters.

The manufacturing process of this product is as follows:

place three pipes at the same distance from each other and connect them with smaller diameter pipes using clamps or other fasteners. The distance between the two extreme sewer pipes should be about one and a half meters;
then glue plugs on both sides of the pipes. To reduce the resistance of the floats, “bend” them from the front using 45-degree corners;
on the base of the tubes connecting the floats, lay wooden shield, which will serve as a deck;
a seat should be fixed on the shield, which can be made from boards.

On this catamaran is ready. This swimming facility is perfect for fishermen, as well as just lovers of walking on the water.

To control the catamaran, use the oars from the kayak. Of course, if you wish, you can design and implement a more complex design with pedal-driven blades.

Option 6: tent

The tent is made according to the same principle as all other structures - it is based on pipes and fittings. The only thing is that the parts do not need to be glued or soldered to make the products collapsible. Another feature is that you will have to sew an awning, for example, from a tarpaulin or other suitable canvas.

The construction process looks like this:

to make it easier to work, draw a drawing indicating the dimensions of all parts and the location of the fittings. The design of the tent is quite simple - the base is a rectangle, to which four posts are attached at the corners.
From above, roofs are attached to the racks. If the roof is gable, then you will need fittings at 45 degrees to assemble it;

then cut the tubes into parts of the desired length;
now assemble the frame from the received parts and fittings according to the drawing;
Next, you need to make an awning. To do this, cut the material into canvases for each side of the tent, as well as the roof, and then sew them;
now put the resulting awning on the tent to make sure the job is done correctly.

For the tent, use quality fittings so that they hold the pipes firmly and do not crack.

Option 7: making a velomobile

Fans of designing and inventing can be recommended to make a velomobile. Is it true, keep in mind that for its manufacture you will need stronger pipes than for the products described above.

An excellent solution is PVC pipes with metal reinforcement with a diameter of 1/4 inch. However, it is almost impossible to find such material in the domestic market. It can be replaced with 40 mm PVC-U pipes intended for swimming pools, although their disadvantage is the high price of the fittings.

In addition, conventional polypropylene reinforced pipes can be used, inside of which metal tubes of a suitable diameter are inserted. Another option to increase the strength of pipes is to fill them with mounting foam.

The process of manufacturing a velomobile frame is not difficult. The design is assembled according to the same principle as all other products - the tubes are connected using fittings and thus the frame is assembled.

The most difficult thing when performing this task is to securely fasten the metal parts - the wheel axles, and the drive. To do this, use metal plates that can be fixed to the frame with bolts. To screw the bolt into the pipe, use the bushings that are glued.

As for the mechanical part, all parts are used from the bike. The only thing is that you can use the electric motor, as shown in the photo above. In this case, an electric drive is installed on one rear wheel, and a mechanical drive on the second.

To implement a mechanical drive, an axle with bends in the form of pedals should be placed in front, as in the photo below. This axle, in turn, transmits torque to the "sprocket", and then everything is like a conventional bicycle.

Here, in fact, are all the main nuances of making a velomobile. For other design tasks, you will surely find solutions yourself.

Option 8: zherlitsa

If you love fishing and experimenting with different gear, then you will probably be interested in this idea of using a plastic pipe, which is to make a summer vent. To do this, you will need a piece of sewer pipe with a diameter of 32 mm and a length of 10 cm, as well as a fishing line, a hook and a sinker.

A vent is made from a plastic pipe as follows:

remove the edges from both ends of the workpiece;
then drill a hole with a diameter of about 5 mm, retreating from the edge of about 1.5 cm. This hole will be used as a fishing line stopper;
now drill a through hole on the opposite side of the workpiece, i.e. the tube should have two holes opposite each other;
now you need to equip the workpiece. To do this, tie a suspension from a fishing line to two opposite holes (for hanging a vent). The suspension should end with a noose;
now tie the fishing line to one hole and wind it around the tube. 10 meters will be enough;
at the end of the fishing line you need to put on a sliding sinker, and also tie a tee hook;
to fix the fishing line in the working position, put a tight rubber ring on the workpiece.

Now the tackle is ready, it remains to prepare the bait and go to the nearest suitable reservoir to check it in operation.

Option 9: folding chair

If you liked the previous option of using a plastic pipe, then the folding one will also come in handy. Moreover, it is made extremely simply and quickly:

assemble a rectangle with dimensions of approximately 40X30 cm from tubes and corners; if desired, you can make the chair even more compact;
now assemble the second same rectangle. Its height should be the same, and its width a few centimeters less so that it can fit snugly into the first rectangle;
now, in the center of the long sides of each rectangle, drill holes opposite each other;
then connect both parts with bolts;
at the end of the work, sew a rag seat, as in the photo above.

As a result, you have a light and compact chair that can even be put in a backpack.

Option 10: waterfall for children

As you know, children are very fond of splashing in the water on hot summer days. Therefore, if you have a dacha, do not deny them such a pleasure and make a waterfall.

The design of this device is extremely simple. It is a U-shaped frame. In the crossbar of this frame from below, you need to drill small holes through which jets of water will fall down.

To keep the crossbar stable on the ground, attach the legs from below, perpendicular to the frame, as shown in the photo above. Attach a hose fitting or threaded fitting to one of the legs. Install plugs on the other ends of the legs.

Now the waterfall is ready, it remains only to connect water to it. For these purposes, you can use a tank from a summer shower or install a special container where the water will be heated under the rays of the sun.

Conclusion

From plastic pipes, as we found out, you can make a lot of interesting and useful crafts. We considered as an example only 10 options for their use. However, if you stretch your imagination a little, you will surely discover a lot of other equally interesting ideas.

From the video in this article, you can get Additional information about how sledges are made from plastic pipes. If some points are not entirely clear to you, ask questions in the comments, and I will be happy to answer you.

August 1, 2016

If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!

With skill and a rich imagination, interesting and useful things can be made from any materials at hand, including plastic pipes.

Plastic pipes of different diameters are sold at any hardware store for quite affordable prices. They are used in plumbing, sewerage, heating, irrigation systems, and after construction or repair, unnecessary trimming often clogs the site, while it can serve as an excellent material for creative crafts.

Do not rush to take construction waste to the landfill - we will tell you what can be done from a plastic pipe to turn excess residue into beautiful and functional interior items.

What is good plastic pipe?

We will not talk about the direct purpose of the product, but about the convenience of using varieties of plastic pipes precisely as a material for crafts. Plastic pipes are light weight, strong and durable enough. They are resistant to dirt, do not collect dust and are easy to clean. Products made of plastic pipes are safe to use even by small children (they do not break, do not have a heavy weight, do not emit toxins).

For creative works PVC pipes are more often used, which are quite rigid and easily connected with special nozzles and "adapters", allowing you to get collapsible structures. Polypropylene pipes can also be used, but their connection will require a special welding machine or compression fittings, and finished products can no longer be disassembled.

Methods for connecting pipes in structures

From plastic pipes, you can make not only convenient household items, but also pieces of furniture. To such homemade product served for a long time and was reliable in operation, care must be taken to properly connect the individual segments. Since it has already been said about the connection of polypropylene pipes, we will consider the connection of only PVC pipes.

PVC plastic pipes can be connected in the following ways:

in a bell with a rubber seal;
with the help of an adhesive composition;
bolts by drilling holes.

The first connection method is characterized by simplicity, but insufficient rigidity. Before connecting, it is recommended to clean the internal and external surfaces of the pipes at the joint from dust particles and treat the inserted part of the pipe with silicone grease. First, the pipe is inserted into the socket until it stops, after which it is carefully pulled back 0.7 - 1 cm. The structures assembled in this way can later be dismantled, which is convenient for seasonal products.

The second method of assembling pipes is distinguished by reliable fixation and greater labor intensity. Work on connecting parts begins with the processing of the mating surfaces of the socket and pipe with sandpaper for better adhesion. Then they must be degreased with methylene chloride. The adhesive composition is applied along the entire length of the prepared outer surface of the pipe and 2/3 of the length inner surface bell. Finally, the pipe is inserted into the socket until it stops and rotated a quarter of a turn. For gluing, it is required to press the parts for 1 minute. For good fixation, all operations to connect two segments must be carried out quickly enough. The connected elements are left for several hours until the adhesive composition dries completely.

The third method is more time consuming, as it requires marking and preparing holes, but allows you to get collapsible structures with a reliable connection.

For corner joints and connecting several segments at once in one node, it is convenient to use a variety of fittings. Plastic pipe structures can be of any complexity using numerous tees and fittings. Consider useful homemade in ascending order of complexity.

Original and functional little things for decorating the interior

Our review of interesting ideas is opened by the simplest products from a plastic pipe, which even novice masters of homemade art can make. In addition, such crafts require a minimum amount of material, and in some cases even the shortest trimmings can be used.

From scraps of pipes of large and medium diameter, you can make a convenient and practical organizer for your office or workshop.

There are two options available here:

fastening with self-tapping screws to a wall or table, for which one end of the segment is cut off at an angle - a stationary option;
gluing the segments together to form a stable figure is a portable option.

The segments can be left white or gray, or you can paint it in your favorite color. Such an organizer is indispensable for schoolchildren and people involved in creativity and needlework. With him, everything will always be at hand, and on the table - the perfect order.

Additional comfort on the desktop will be provided by a drawing tablet and a laptop stand, which can be made from small-diameter polypropylene pipes.

Bookshelves are a special element of the interior. Their presence in a certain way characterizes the landlord. corner shelf in high-tech style will not go unnoticed.

From numerous short cuts of different diameters, you can make a patterned frame for a mirror or photograph. It is enough to glue the cut rings according to a pre-prepared layout, which can be applied to a sheet of cardboard. It can be floral patterns or something abstract. The dimensions of the frame will depend on the amount of suitable material.

Scraps of large diameter can be used to create a comfortable shoe shelf with numerous compartments-cells. This design will not take up much space in the corridor and will ensure proper storage of shoes and a quick search for the right pair. The elements are connected using glue or self-tapping screws. To fix the shelf on the wall, you can use a plywood sheet, to which the assembled shelf is first glued.

Some crafts made from PVC pipes will really appeal to lovers of fresh flowers. A reliable flower stand is simple in execution and looks pretty.

For the manufacture of flower pots for transplanting or breeding pets, small pieces of sewer pipes are well suited. Having shown imagination, such pots can be decorated with colored paper, paint or bright stickers.

It is easy to make a stylish vase for artificial flowers and dried flowers from elongated cylinders of medium diameter. If you approach the implementation of this idea creatively, then an original gift for a significant event can come out.

Another extraordinary idea for the interior is homemade techno-style lamps. There are a lot of execution options, but they all adhere to the principle of minimalism: no unnecessary details.

With the help of unused scraps, you can also make useful things in the hallway or corridor: a hanger for clothes and bags and a holder for garbage bags.

Crafts from plastic pipes for the playground

From PVC pipes, you can make a lot of crafts for children's entertainment in the yard: a developmental rug, an arena, a swing, a sled, a football goal, playhouse, outdoor shower and theater screen.

A very useful design for kids is a playpen made of PVC pipes.

Kids will love the lightweight swing that dries instantly after a warm summer rain.

In winter walks, homemade sleds will be the most reliable and fastest. The design is quite complicated, but with the help of practical videos you can figure it out.

For active games in the yard, safe football goals can be made from the remnants of plastic pipes.

Many children often dream of their castle in miniature. Making your childhood dreams come true is quite simple and not at all expensive. The frame is done very quickly. It remains to pick up a beautiful dense material for the roof and walls, and the house is ready!

The following structure will help to freshen up on a hot summer day. Such an open shower will be a joy not only for children, but also for adults.

From polypropylene pipes you can make a theatrical screen. It is enough to collect 3 frames, connect them together and close them with beautifully designed curtains. Home theater develops the creative abilities of children and creates good conditions for a fun time.

We update the interior economically: furniture made of plastic pipes

Crafts from plastic pipes with their own hands can occupy a key place in the interior. Craftsmen share many extraordinary solutions that can significantly save the family budget. Let's highlight the brightest of them.

The most common and sought after piece of furniture is a chair. Using pieces of plastic pipes and connecting elements, you can make high-quality chairs different types: for children, folding for hiking and fishing, armchairs and even highchairs for feeding.

Having mastered the assembly technique a little, you can proceed to more complex structures. A neat bunk bed made of polypropylene pipes is a good alternative for country house or cottages, when buying a ready-made crib is too expensive. Moreover, when the kids grow up, the material can be used to make other useful crafts.

The glass coffee table with a PVC pipe base in the next photo can hardly be called an amateur homemade product, because it looks like a design work.

Another one original idea- shelving for the hallway or living room. Having independently designed a rack with the right number of shelves of the required size, you can not waste time shopping in search of something suitable.

Useful crafts for a country house and a summer residence

Unused and superfluous building materials will definitely find a use for suburban area. Crafts from plastic pipes for summer cottages will make it much easier garden work, will make the rest more comfortable and help to avoid high material costs. At the same time, the designs look neat and stylish.

From small lengths and a few tees, you can get a nice dryer for clothes and towels. It is easy to clean and does not corrode.

Relaxing by the pool or in the shade of the garden is impossible to imagine without a sun lounger. The photo shows a chaise lounge, completely consisting of plastic pipes, but can also be combined with dense matter.

Carport - one more useful application PVC pipes. It will protect transport not only from a rain, but also from the scorching summer sun.

Often used for garden decoration garden arch, which can also be made of plastic pipes. A new element appears in its design - bent arcs. You can bend pipes for an arched vault by heating with a gas burner or boiling water. You can also put the pipe on a metal rod and, sticking one end into the soil, bend it in an arc. This method requires some physical effort.

A simple and light gazebo will decorate the garden and protect from the sun and light rain. For the presented option, it is enough to fix a waterproof raincoat fabric on the pipes and bend them on reinforcing bars. To make the design reliable, you need to take care of good fixation of the rods in the soil.

The range of application of plastic pipes is truly huge and limited only by your imagination and needs. You need a small woodcutter, a gate, a cart or a fishing rod stand - take required amount pipes and bring your idea to life.

It is easy to make a convenient feeder for chickens from sewer pipes. It is very convenient to pour grain with it without going into the corral. Chickens cannot rake grain in such feeders, which saves feed.

A small greenhouse in a summer cottage can also be made from plastic pipes. The easiest option: make a rectangular frame and cover it with a film or agrofibre.

A more serious construction - a seasonal greenhouse - will require more time and material. It is better to connect the elements with bolts so that it is possible to disassemble the structure into winter period. The optimal shape of the greenhouse is arched. To create it, the ends of the pipes are put on half-meter metal bars driven into the sides of the future greenhouse every meter. The dimensions of the greenhouse depend on the intended use. The greenhouse can be installed on the foundation or on the ground. Film, polycarbonate or agrofibre can be used as a covering material.

Plastic sewer pipes can also become a container for growing flowers, herbs and vegetables. Very often they are used to create vertical gardens.

To fence the site, you can use a low fence made of plastic pipes, which is durable and has minimal maintenance requirements (it does not need to be painted every year).

The use of plastic pipes is not limited to the ideas presented. This material is so versatile and easy to assemble (it is easy to cut, bend, has a variety of connecting parts) that it is simply impossible to ignore it in your home workshop.

At the moment, many people have PVC pipes in their household. If they have already bothered you, then in no case do not try to throw them away and change them to others. They have a whole host of advantages.

First of all, one cannot fail to note the pleasant White color. It is perfect for creating interesting products. In addition, the most common glue can be used to fasten the elements. If you don’t glue everything, then it’s even better. You will receive a kind of LEGO constructor. consider interesting ideas that you might like. You yourself can think what you will do, it is enough just to show your enthusiasm.

Just look at the high chair pictured below. Surely you want to build it. The temptation is very great.

From one pipe, you can easily make a folding chair. It's perfect for a picnic.

Do you want everything to look organic? Then just create a set of several chairs and a table from the same pipes.

A great bunk bed for kids. But you need to choose pipes optimal diameter to distribute the load.

If you have a dog at home, then you can create a bed for her. It is only necessary to take into account the weight and size of the dog.

From pipes 1/3 or 1/2 you can make a very good stand for your laptop.

Want to get a good dirty laundry basket? Then just make it out of pipes. You just need to make calculations according to your needs. Just look how stylish it looks.

You can do bigger things too. In particular, hanging swings, where you can have a great time in the country.

There are only remnants of PVC pipes? Then you can simply add a bottom to them and store pens, pencils and much more. It all looks very creative.

Building a house or renovating an apartment is always accompanied by a bunch of leftovers from consumable. Pipeline repair is also no exception, because after replacing metal pipes with plastic ones, there are a lot of scraps left, as well as connecting elements - fittings, which many owners simply throw away.

However, there are also such creative people who can make durable and original furniture out of such rubbish, for example, tables or chairs, as well as other household items such as an organizer. In this article, we will analyze in detail some of these PVC pipe ideas.

Do-it-yourself children's chair made of plastic pipes

Polypropylene is a hypoallergenic and non-toxic material, so you can make various children's furniture from it without worrying about the health and well-being of the child. By embodying ideas from plastic pipes with your own hands, you can easily assemble a table, playpen, chair, etc.

One of these simple projects can be a comfortable highchair, which is assembled from pipes and fittings like a designer. The size of each detail will depend on the size of the desired result, but below we will give instructions in which we will tell you how to make a chair for a five-year-old child.

To make a chair, you will need the following materials and tools:

Glue for PVC;
Approximately 3 meters of polymer pipe;
6 T-fittings;
8 elbow fittings (90°);
Durable fabric;
Saw with fine teeth;
Sewing machine;
Scissors.

Building a chair:

The first step is to cut the pipe into segments: 7 pcs. 33 cm(A), 4 pcs. 20 cm(B), 4 pcs. 13 cm(C) and 2 pcs. 18 cm(D);
Take two parts A and fasten at all ends to the corner fitting;
Insert all elements B into each of the fittings;
On each element B, put on T-shaped connectors, unscrewing their perpendicular part perpendicular to element A;
Connect the T-fittings in pairs with elements A. As a result, you should get parallel legs of the chair;
Insert all elements C into the free ends of the fittings;
Next, you need to put the structure so that the ends of the legs "look" at you;
Take two corner fittings and put them on the parts C closest to you;
Slip the two T-pieces over the C pieces further away from you, turning them so that the center connections are facing you;
Next, you need to connect the inserted fittings with parts A parallel to the legs of the chair;
We insert parts D into the free ends of the T-shaped fittings and put on them the corner fittings, turning them “face” to each other;
We connect them with element A, finishing the back of the chair;
Make a seat out of fabric by stretching it between parallel bars;
Glue all connections, after which, let the chair dry.

Office table with plastic frame

Buying even the cheapest office desk can be a big problem for some people, so we will show you how to make a table out of plastic pipes. This project differs from the previous one in its complexity, so you will have to think through some parts on your own, but we will try to explain everything to you as clearly as possible.

First of all, you need to decide on the size of the table. In our case, we take a finished worktop (915x2030 mm), under which we will assemble the frame. When choosing a countertop for your own table, pay attention to its weight and be guided by the rule: the less weight, the better for your table. The best solution for the countertop will be a hollow door leaf. You can also assemble the countertop yourself using flat boards, fasteners, a saw and a drill.

First of all, prepare 12 meters of plastic pipe and cut it into the following parts:

5 pieces of 7.5 cm;
10 pieces of 30 cm;
4 pieces of 50 cm;
And 4 pieces of 75 cm.

Of the other parts for the frame, you will need the following:

4 T-fittings;
4 four-way fittings;
2 cross fittings;
10 caps for pipes and fittings.

Having prepared everything necessary details, you can start assembling a table from polypropylene pipes. The first assembly is best done without the use of glue, and after assembly, glue all the joints one by one. Start the assembly by constructing the sides of the frame, on which the countertop will rest.

Next, assemble the back, which will connect the two already assembled. To give the table additional stability, we recommend making a third leg on the back wall. When assembling the table, carefully monitor the parallelism of all elements in order to end up with an even design.

At the final stage, it is necessary to connect all the parts into a single structure, having received the table frame. Check it for strength, correct the irregularities, after which, glue all the joints.

To fix the table top:

Lay the tabletop on the floor, turning it "face" down;
Place the frame on top so that the top plugs fit snugly against the countertop;
Circle adjacent plugs;
Disconnect the plugs from the pipe, screw them to the countertop at the marked places;
Install the table frame, and put the tabletop on it so that all the plugs fall into place.

As a result, you will get an excellent table made of PVC pipes with your own hands. This material is so versatile that you can even make a PVC pipe bow that will work just fine.

Shelving for summer cottages

After repairs, not only polypropylene pipes can remain in the house, but also metallic profile, from which you can try to make a rack for giving without the use of welding. For work, we need only a tape measure, a pencil, a screwdriver and a hacksaw.

First of all, it is necessary to design the future rack. Draw a diagram on paper, observing all dimensions. Next, you can buy a profile to an existing one, as well as find several sheets of plywood 15 mm thick. You can also make a PVC pipe rack with your own hands using a profile diagram.

Let's analyze the manufacturing process using a specific example:

Take the profile and cut it into pieces: 4 vertical posts, 8 front and 8 rear crossbars;
Collect 4 frames, which should become shelves in the future;
Using self-tapping screws, fix the received frames on vertical racks;
If desired, you can screw the rack to the wall and paint it, after which, lay the plywood on the frames, making the shelves.

Various interior elements made of PVC pipes

For interior decoration, as well as creating useful structures PVC pipes, very short lengths of pipes can be used. So you can make organizers from short pipes, where you can put shoes, writing utensils and other small things into the holes.

You can also easily make wine shelves from PVC pipes with your own hands. To do this, simply glue a few pipes, and screw the resulting structure to the wall. Similarly, you can make a holder for glasses. To do this, it is enough to cut the plastic pipe lengthwise, after which, fix it on the wall. The leg of the glass fits perfectly into the cut hole, and the rigidity of the polymer pipe does not allow it to fall out.

If your home lacks space for outerwear, then a hanger made of plastic pipes is an excellent solution to this problem. You can design and assemble such a hanger, starting from examples with a table and a children's chair.

In conclusion, I would like to say that plastic pipes are a cheap and light raw material for creating various decorative elements. Any object created by you can always be painted, covered with sparkles, or decorated with various elements, for example, shells glued on glue. Polypropylene rings can also be used for seasonal apartment decoration, for example, under New Year You can do wall panel and fill it with New Year's paraphernalia, for example, balls and figurines.

As you can see, in order to create a cozy atmosphere and decorate an apartment, it is not necessary to spend a large amount of money, because the main thing is a creative approach that will allow you to create the desired result at minimal cost.