Metal crafts - homemade jewelry and products. Instructions for creating and designing (90 photo ideas). Crafts for giving from all sorts of things in half an hour Do-it-yourself metal crafts for the dacha

In this article we will talk about how crafts are made with their own hands for summer cottages and gardens. We will consider the instructions for making crafts using the example of well-known decorative figures that are used in the arrangement of courtyards and plots adjacent to a country house.

You can buy such figures in specialized stores or to order. In both cases, the price of these decorative elements will be high, and therefore, it would be much more correct to make a decoration for your garden with your own hands.

In the photo - a sculptural composition of old car tires

Selection of production materials

When planning to make crafts for the dacha and the yard with your own hands, first of all, you should decide on the selection of production materials. To do this, you need to take into account the conditions in which the crafts will be operated.

As a rule, garden statues are installed outdoors.

Therefore, they must be resistant to such negative factors. external environment How:

• sudden temperature changes;
• excess moisture in the air;
• precipitation;
• ultraviolet radiation;
• bark beetles and other insect pests.

Considering the listed requirements, wood, metal, natural stone and concrete. All of these materials are strong, relatively durable and, most importantly, all these materials can be given the required shape, having seen life in them.

The choice of images for sculptures

In the photo - a crocodile from car tires

Today even country houses from the container block it is customary to decorate and ennoble in every possible way. Moreover, garden figures will take their rightful place among the decorative elements used in the design. country house or adjacent area.

But the question arises, which image should be chosen for embodiment in sculpture or composition? Of course, the choice of image depends on the type of material used. However, the simpler the chosen image or plot, the easier and faster you will achieve your goal.

Woodwork

The instruction for making wooden figures is simple and directly depends on the selected sketch. Perhaps, let's start with something simple, for example, with figures made of plywood, as shown in the photo below.

In fact, this kind of craft is a decorated box in which you can fill the ground and use it as flower vases.

To make a flower bed figure you will need:

• multilayer plywood;
• small bars with a section width of 50 by 50 mm;
• self-tapping screws.

Of the tools you will need:

• hacksaw;
• jigsaw;
• drill;
• measuring accessories.

The work instructions are as follows:

• On initial stage a frame is assembled from the bars in the form of a hollow square with small legs.

Tip: Instead of building a frame from scratch, you can use an old unnecessary stool with a dismantled seat.

• In the lower part of the frame, a bottom cut out of plywood is attached to the screws.
• Similarly, side walls are cut out of plywood and fixed with self-tapping screws.

Tip: To prevent the plywood from cracking when screwing in screws, we pre-drill holes of a smaller diameter than the thickness of the self-tapping screw.
We also drill small recesses in which the head of the screw will fit.

• After the plywood box with wooden legs is assembled, it's time to start decorating it.
  For these purposes, you can limit yourself to the use of paints and brushes. If the craft will be constantly located in the open air, we use waterproof paints. For example, the use of PF115 enamels will be an inexpensive and at the same time effective choice.
• If one coloring is not enough, you can cut out various decorative elements from the remnants of plywood and fix them on the box, as shown in the photo.

Another type of wood crafts is decorative mushrooms.

Sometimes stumps remain on the site, which are too lazy to uproot.

Why make efforts, clearing the site, if you can give the stump the required shape and turn it, thus, into a decoration of the garden or vegetable garden.

• From a stump with a height of at least 30 cm we make a mushroom leg. To do this, it is enough to use an ax, cutting down a cone truncated upwards with it.
• We make a hat from a wider part of the trunk. In this case, we combine the ax with the chisel.

Tip: you can do it easier and not waste time processing wood.
For example, you can make a hat from polyurethane foam or use an old unnecessary basin instead of a hat.

• The finished hat is fixed with screws in the upper part of the prefabricated leg.
• After the sculpture is ready, it remains to paint it in suitable colors.

Important: More complex figures, such as the notorious gnomes, will require you not only to show the talent of the carver, but also to apply one or another professional tool which you may not have.

Crafts from natural stone

In the photo - a figure of a cat made of polished stone

Natural stone is beautiful in itself. For example, if you have rubble stone left after building the foundation, you can use it for. To form any figures from this material, it is enough to prepare a cement mortar.

There is a variety of large rounded smooth stones, which, collected in certain quantities, already represent a finished composition, and if they are painted in different colors, the impression of such a decorative element will be simply indescribable. Again, you can arm yourself with a brush and paints and paint the stones, as shown in the photo.

The idea is good because you do not have to resort to mechanical processing of stone.

metal crafts

It is not easy to make figures from metal, since blacksmithing equipment or at least will be required to work with this material.

However, for sure, many people had an old Soviet bicycle lying around in a barn or attic, which they forgot to take out in time to a landfill. An old metal bicycle and other unnecessary iron structures, with correct location, can serve garden figures as shown in this photo.

Important: For machining metal or other hard materials, an appropriate power tool is required.
The use of such a tool will be difficult if the electricity is on country cottage area is supplied intermittently and in this case it may be necessary to purchase or rent a diesel generator for a summer residence.

Crafts from cement

The instructions for making such figures are simple and do not require the use of a special tool.

As molds for casting a sculpture, you can use a three-dimensional print in the ground or wet sand. In order to provide the cement sculpture with sufficient strength, wire reinforcement is placed in the mold before pouring the mixture.

In order for the finished product to quickly gain the required strength, cement and sand should be mixed with marble chips in a ratio of 1 * 1 * 2. After gaining strength, about a week after drying, the product is polished with sandpaper and a stone. Wet sanding guarantees optimum results.

Conclusion

Now you have a general idea of ​​\u200b\u200bhow crafts are made for the dacha and the yard with your own hands. The knowledge gained can be put into practice, doing the arrangement of your country house or garden plot. More useful information can be found by watching the video in this article.

Beautiful crafts for giving can be made with your own hands from all sorts of things - from what is at hand. We offer you a few simple projects that will take no more than half an hour.

DIY crafts for giving.

The owners of old Soviet chandeliers probably immediately recognized what the “water” in this original garden stream was made of.

So, if you have an old chandelier with transparent plastic or glass pendants, then you can make yourself such beautiful crafts for giving. This option is made with a watering can - we attach beads or pendants to a wire, thread it into the spout of the watering can and fix carnations on the inner end of the wire - it will hold our flow of their beads.

The number of beads depends on the size of the watering can - if the watering can is large, there should be enough of them so that they can be seen from afar. The watering can can be hung on a tree, or fixed on a rod in the middle of a flower bed.

The water faucet can also be decorated with a bead - if the faucet is operational, then it is better to think over the spout cover, which would be convenient to remove.

For those who do not have an old chandelier with pendants in stock, we offer another project: we concrete metal rods on a small platform, we attach a watering can to their upper ends.

You can leave our original craft in this form, or you can put a container with flowers below or break a flower bed.

Beautiful crafts for a summer residence made of glass.

Crafts for giving with your own hands - the topic is simply inexhaustible! We will also put the rest of the dishes into action and make a garden angel out of them.

It is not necessary to put the first experiment on unnecessary crystal dishes - it is quite possible to start with ordinary bottles, old salt shakers and glass salad bowls. We connect everything with universal glue. If our base is a bottle, we will also need a metal rod on which we will put our figure.

Oddly enough, such crafts from improvised materials can be quite functional, for example, to be a ceiling lamp for a garden lamp.

If not every form of dishes is suitable for a garden angel, then for magic glass colors will suit almost everything that is not needed in the household - plates, saucers, vases, bowls, etc.

We select the shape of the flower from the presence of unnecessary dishes - it is not necessary to take only transparent ones, the basis for the flower may well be an ordinary plate. We glue the dishes together with universal glue.

Think in advance how you will fix this flower in the garden. There are two options: the first - on the back wall of the flower you glue a bottle (jar, vase, etc.) - a container that can be put on a rod.

The second option - you can simply glue a piece to the plate plastic pipe and put it on a rod.

The options for such colors are simply the sea: different shapes, coloring, combinations… try it!

Crafts for giving from metal.

Any summer resident eventually accumulates all sorts of pieces of iron in the household, either these are old garden tools, or the necessary pieces of metal, which are a pity to throw out and have nowhere to use. From all this metal you can make wonderful crafts for giving.

Such country crafts can be from old garden tools, pipe cuts and all the metal that every owner has in the barn.

The best method of attaching such crafts is welding, although there may be other methods of attachment for different designs.

Look at the personality of this fun garden figurine made from waste metal cans and old springs.

And this "master's dog" is distinguished by its special thoroughness and friendliness.

As already mentioned, metal garden crafts can be made without the help of welding. For example, this openwork wire panel is made on metal frame made of thick wire, to which the whole image is fixed with a thin wire. Maybe this is a garden nymph, or maybe the mistress of the estate.

Stainless steel garden crafts look neater and do not require regular maintenance, but they are more difficult to manufacture.

For the most daring: a mailbox grasshopper can not only surprise your good friends, but also scare intruders.

Our fantasy is amazing - this either a piglet or a puppy that is waiting for us in the depths of the garden is charming and causes a smile.

Crafts for giving from metal require not only the presence suitable material but also the availability of your free time. Don't regret wasting your time making a garden figurine instead of painting the fence.

Original crafts for giving.

Look around - did the metal mesh remain in the barn after the repair? Excellent material for garden lamps.

Old spoons were lying around - teach your son to solder, and he will be happy to remember what funny things he did as a child with his father.

After all, such crafts for giving say that we not only know how to work well, but are also able to have fun and relax from the heart.

Create your own mood - make your own version in the country original crafts for garden.

You can decorate the interior of a house or a country cottage not only with store-bought trinkets, but also with hand-made metal products. Moreover, it is available to everyone, since it requires a minimum set of tools and knowledge. At the same time, such things can make decorate any interior.

Thinking about creating such items, everyone can choose for themselves manufacturing technology based on your experience and knowledge. Although in each case the selected technique will require certain costs necessary for the purchase or manufacture of special equipment.

It is in the power of everyone to create a lot of various metal products, to arrange a garden with their help. It can be both crafts and pieces of furniture, as well as various decorative bridges and forging elements.

The technology of making things from metal

Do-it-yourself metal products can make any design more attractive, including benches, cornices, furniture and other things. Moreover, the owner can choose the style of his choice, paying attention to the fact that the created thing looks harmonious in a particular room.

In stores, metal products are offered at rather high prices due to the fact that they are made by hand. However, if you wish, you can master the science of creating these items yourself, thanks to which you can save a lot of money on this. The only costs that may arise here will be related to the purchase of materials.

To create metal patterns and details, you can choose any technique you like. Quite common among them are forging, stamping, cutting, bending, chasing and filigree. After the scheme or drawing of the product is received, as well as prepared necessary materials, a person will be ready to implement the plan to create an unusual and beautiful product.

Metal is the material on the basis of which you can create a whole composition of various crafts for the garden.

Therefore, there are many different methods that allow you to create at home pretty original stuff.

• Casting. The essence of this technique is to fill with a liquid alloy of a special form.
• Forging. This method is based on the impact on the workpiece with a hammer, temperature, press and other methods of deformation.
• bending. This technique is in many ways similar to forging, it is based on riveting and welding of product elements.
• Difovka. This method is characterized by the use of a hammer, with the help of which thin sheets of iron are given the necessary shapes.
• Stamping and cutting. Using this technique, you can effortlessly change the shape of the workpiece, as well as create holes.
• Filigree. This method involves the use of cast or smooth wire as raw material, from which the product is created by soldering the bent elements of the pattern.
• Chasing. This processing method is simple in execution, and its essence lies in placing a special tool on the workpiece, which is acted upon by a hammer, thereby changing the shape of the product.

There are several ways to make drawing for a metal product. It can be developed manually or use special computer programs. Thanks to the drawing, you can find out in advance how much material is needed to create things. First of all, those who plan to make large objects, for example, gates, bars, cannot do without it. Having a ready-made sketch in hand, it will be easier for the master to understand even before starting work how harmoniously this product will look in the place chosen for its placement.

simple metal things

If you do not have experience in making such things with your own hands, then it is recommended that you start by creating the simplest metal objects. Such can be a metal box, which can act not only as a decorative element, but also perform practical functions.

Required Tools

Suitable as a base regular tin can. To make such a box, you will need to prepare a number of tools:

The process of making a box with your own hands begins with cleaning the surface of the can from paint, for which use sandpaper. It is advisable to carry out the operation when the jar is still full. Otherwise, you will have to perform such preparation as carefully as possible, because if the metal is deformed, then you are unlikely to be able to make a beautiful box.

After that, they begin to cut the can: this must be done in such a way that a rectangular blank is obtained. Before that, you need to cut off the bottom, after which the upper part is cut along. During this operation, irregularities will necessarily appear along the edges, which it is desirable to sharpen immediately.

Next, it must be placed on a hard surface, where the images contained in the drawing are already applied with a pencil. After that, proceed directly to the creation of the pattern. You will not have any restrictions in choosing jewelry for the box, but it is still advisable to use symmetrical details. To create a pattern required ball pen , with which you can easily push through aluminum. You can achieve the effect of a pronounced texture if you draw along the contour lines of the pattern more than once. After completing the steps listed above, you will only need to assemble the box.

If you have welding equipment and skills in handling it, you can make a very beautiful metal owl with your own hands. In addition, you will have to prepare the following tools:

At the first stage it is necessary draw a sketch of an owl on paper, after which it is transferred to cardboard. This will make cutting easier for you. individual elements. To create an owl, we will have to make eyes, a body that includes feathers, wings and a tail. To make it easier for you to cut metal parts, you can use a grinder.

When creating the eyes for the owl, make sure that they have large holes in them, through which you can insert bolts. On all the scales you will have to create notches, thanks to which the plumage effect will be provided. To do this, you will have to use a chisel. Paws can be made by connecting parts of the rod to each other, using welding for this. To create a beak, use a piece of bent metal. During the assembly of the product, the beak and paws must be welded at the very end. When all the elements are in place, the owl can be further decorated by treating it with a special varnish.

How to make frost patterns?

Making frosty patterns is not a very time-consuming procedure, but at the same time it is able to provide a rather spectacular appearance to the product, giving it a resemblance to ancient craftsmen's products. This largely contributes manifestation of the structure of tin that looks like crystals. To make frosty patterns, it is recommended to use cans, since a layer of tin has already been deposited on their surface.

You can develop the pattern as follows: for this you need a candle, over which you need to hold individual parts of the metal for some time. The jar must be heated for a strictly defined time. If it is overexposed, it will lead to damage to the product. the main objective, which must be achieved during the heating of the tin layer - to allow it to manifest itself.

You can also make a frosty metal pattern with your own hands if you place the tin on the surface of the steel plate in advance, and then heat or melt.

A burner is suitable for this purpose: thanks to a steady flame, you can easily heat the required area of ​​\u200b\u200bthe tin. As the tin heats up, you can notice how a shine appears on it, which disappears after a few seconds. Try to process the metal sheet in such a way that its sections are heated unevenly, otherwise you will end up with a uniform pattern. To give the workpiece original look, creating a unique pattern, it is enough to warm the sheet in the corners.

When the desired pattern is obtained, it is necessary to sharply lower the temperature of the metal sheet. To do this, it is dipped in cold water or splash. To make the created pattern visible on the sheet as clearly as possible, the surface can be further treated with hydrochloric acid. For safety, you need to prepare a tool - stick to which a cotton swab is tied.

Sometimes, after warming up, it is not possible to achieve the required clearance. In this case, you can remove it once with sandpaper. It is not recommended to repeat this technique, because otherwise it will lead to the complete removal of the tin layer.

For decoration purposes, you can also turn to wax paint, which is used to process certain sections of a metal sheet, after which they are heated. It is possible to ensure the stability of the pattern created on the jar by treating it with a special varnish. Even better, if you apply a colored clear varnish on it, thanks to which your thing will look even more original.

How is cold forging done?

The cold forging method can also be used to create metal products at home. With the help of this technique, you can make things with an unusual shape with your own hands, this is done with the help of a press. With a small thickness of metal there is no need to resort to heating it, this will help to avoid many difficulties.

Cold forging tools

Although this manufacturing method is more simple than the technique of creating metal products by hot forging, certain tools are also needed here:

• Gnutik, with which the workpiece will be bent to give the desired shape;
• A snail, which is also used to deform a sheet of metal;
• Special flashlight used for weaving;
• A wave that allows you to make wavy patterns;
• A twister that allows you to twist the rods together, thereby making it possible to obtain spiral elements.

Manufacturing steps

Even before the manufacture of a metal product by forging, it does not hurt to depict sketch or product diagram.

Then, using the available tools, they begin to manufacture the constituent elements of the product, and subsequently they are connected to each other by welding.

The last step in the manufacture of metal products by cold forging is the removal of seams, grinding and applying special varnishes.

The most common options for cold forging were discussed above, but it can also be performed in a slightly different way - in the form of embossing. To use this method, there is no need to purchase special complex tools. This technique is based on working with a workpiece, on which a pre-composed pattern is applied by extruding metal. After a sketch of a pattern or image has been prepared, it must be cut out. Then you need to take care of the availability of space for bending the material.

After that, the board is covered with a layer of resin, where the finished workpiece is already laid out. From this moment, the process of its design begins by transferring the pattern to it.

Conclusion

You can decorate your home not only with the help of modern accessories and beautiful little things that are offered in stores. If you wish, you can independently make metal things that will look no worse. Naturally, in the absence of skills in the manufacture of such products, it is possible that the first box or other thing that will be made by your hands will not be as beautiful as you would like.

However, as you hone your skills, you will get better at this task, and subsequently it will not be difficult for you. create more complex things. This will allow you to turn your hobby into a fairly profitable business. After all, things that were made by hand are very much appreciated.

Probably, all owners of their own allotments, whether it be a yard or a summer cottage, are forever captured by the desire to decorate the territory under their control. Of course, for these purposes it is easier to purchase everything you need in the store. However, to make crafts for the garden with your own hands, and new and unusual ones, is a unique pleasure.

Especially for those who succumbed to this desire, we have selected the newest ideas for crafts. We made many of them ourselves and publish descriptions, drawings and diagrams for repetition. Thus, you can see all the latest innovations from the world of garden crafts.

Best DIY Garden Decorating Craft Ideas

Incendiary novelties of the current year

When deciding to decorate the yard with homemade products, one should not rush. Definitely, first you need to familiarize yourself with what others have already done. The desire to build something unusual and new is commendable.

However, it is much more important to ensure harmony landscape design Your yard with future design elements.

For example, a charming flower cart is placed in the shallow water of a pond, without which the decor becomes familiar and standard.

If you want to get an interesting and thoughtful design of the garden, you should follow the following instructions:

• explore possible options homemade;
• draw up a diagram of their placement on the site in accordance with the landscape;
• evaluate your options, discuss the project with friends and adjust the plan.

It will be logical and correct to place crafts in accordance with their purpose:

• frog, duck and snail are appropriate near the pond;
• a small bird, a squirrel and an owl will take root on a tree;
• a cheerful hedgehog can peek out from behind a bush;
• a large animal or figurine has a place on earth.

A charming donkey with a cart is of impressive size and would be appropriate on a plot of at least 6 acres. For its manufacture, you need to act according to the following plan:

1. The frame of the sculpture is made of metal mesh PVC coated. The torso, head and legs are made of separate parts of the mesh with a cell of 50x50mm, rolled into rolls. different sizes. The parts are interconnected by pieces of wire.
2. Inside the case there is a plastic mesh with a small cell and geotextiles.
3. The cavities inside the donkey's body are covered with fertile soil.
4. Plants undemanding to moisture are planted in the soil.
5. The cart is made of wooden bars. It is convenient to choose wheels and planters from the available waste materials.

The palms that never get tired of holding the flowers placed in them look original. A simple master class for making crafts:

1. A solution of cement and sand, diluted to a state of liquid sour cream, is poured into rubber gloves in a ratio of 1: 3. It is necessary to use clean fine sand.
2. While the solution is solidifying, the desired position of the elements of the hand should be ensured with the help of cardboard, a rag and sand.
3. After the cement hardens, the rubber mold is removed. It may be necessary to putty small flaws. Blanks must be primed and painted.
4. Cement hands are placed near low plants, soil is poured into the palms and flowers are planted.

Obviously, do-it-yourself metal figurines are rarely made due to the complexity of execution. The more interesting and valuable the specimens presented. An iguana is made of steel sheet, a couple of lovers is made of rebar, a shovel fits for an owl, and ants are assembled from a steel bar and fine mesh. In all cases, welding was used to mount homemade metal products. As you can see, metal crafts can be even more interesting without coloring.

Before you are images of handicrafts made from plywood with your own hands. From it it turns out to make quite large and colorful figures for giving.

Wood is the oldest material for creativity. Before you are the easiest figures to make. Nothing prevents you from using your imagination and offering something of your own.

For example, it is possible to build an entire submarine from planks. Everything is so simple that it is not necessary to explain.

Stone is no less ancient material for crafts than wood. Nevertheless, creative personalities from the country of masters continue to amaze us. The simplest ladybug or caterpillar is made in accordance with a short master class:

• stones of suitable shape and size must be washed and dried;
• with a brush, apply the dye of the main color to the surface of the pebble;
• after the first layer has completely dried, the largest decoration elements are applied;
• dyes of subsequent layers are applied after complete drying of the previous layers;
• The jewelry covered with a protective layer of varnish will retain its attractiveness for a long time.

Spatial figures made of stone are made using a frame made of thick wire or reinforcement. Thus, it is possible to build a dragon from the cartoon "Shrek" and other novelties with your own hands:

1. First of all, you should schematically depict the future figure and select required amount stones. Suitable limestone, which is well drilled and processed.
2. A heavy sculpture will require a small concrete foundation. Pieces of wire or reinforcement with a diameter of 8-12 mm are placed in concrete, on which stones will subsequently be mounted.
3. After the foundation has completely solidified, the stones are drilled with a perforator and placed on the frame segments. Individual pieces of wire are bent to create the desired shape. To prevent the stones from rotating, they should be fixed with cement mortar.
4. The grinder needs to refine individual stones to designate the dragon's mouth, eyes, etc.
5. Applying paint will help to place the missing accents.

There is also a dragon boy

Funny dogs are also made of stone. To collect them, I had to choose stones suitable form. To connect the individual elements of the craft, holes are drilled in them, where pins made of wire with a diameter of 4-8 mm are inserted. Additionally, the parts are fastened with cement mortar.

A stone flower for a garden and a vegetable garden is easy and simple to build with your own hands. The idea is obvious: we select suitable stones and fasten them with cement mortar. For reliability, it is necessary to equip a very small foundation 5-10 cm high under the base of the flower.

Dwarf, ladybug and cartoon characters are made of concrete. The examples given mean that it is realistic to build both very simple and rather complex home-made products for home and summer cottages from cement mortar.

A variety of homemade products are made from old automobile cylinders at home. The photo shows the most characteristic novelties from tires. Other interesting examples, as well as techniques for working with car tires we present in a separate article.

For your assessment, several more successful homemade products for home and garden are offered:

1. The old bath is quite often used in the country. The shape and dimensions of the object are great for simulating the body of a cow. A bit of black paint, a plywood head and a rubber glove udder complete the look.
2. This beautiful butterfly is made on the basis of a plywood sheet. The base surface is primed. A mosaic is applied to the plywood with glue.
3. The bushes, which were given an oval shape during shearing, resemble the bodies of ostriches. The long neck of the bird is imitated by a stick stuck into the ground. The head of an ostrich is conveniently made of plaster or foam.
4. The hedgehog is beautiful in his embarrassment! It is convenient to make it from foam, into which it is easy to stick needles from toothpicks. Paws are good from wooden sticks. It is better to put contents in a cloth bundle that are not afraid of moisture.

Original and simple garden figurines from improvised materials

In this section, we grouped products made from improvised materials. Thus, it is possible to choose an object for repetition on your own by comparing several options. Most of them are easy to make at home.

Computer CDs sparkle in the sun with a bright rainbow and are not afraid of bad weather:

1. In combination with the body of a bird carved from a tire, an original figurine of a peacock is obtained. A knitted metal mesh is used as the basis for the bird's tail.
2. If you stick fins cut out of plastic to the disks, you will get charming fish.
3. Several disks, wired to the fence mesh, form a cheerful caterpillar. It remains to add hair and legs.
4. 6-8 discs are painted with bright colors and put on a stick. We fasten the ends of the disks with a glue gun - we get another caterpillar.

Ornaments for the garden and garden can be made from foam. It can be birds, mushrooms, and other figures. The material is well processed with an emery cloth. It is highly desirable to protect it from solar radiation with a coating. Acrylic paint will not dissolve the foam, but before applying it, the surface of the figurine must be primed.

Decorations for giving from glass bottles will last a long time. It is convenient to make fences for plants from glass containers. Using glass bottles, you can create a futuristic plant by putting them on the ends of wires sticking out of the ground.

Old 200l barrels will get a second life if they are brightly painted. Barrels can be used for water, as flowerbeds of various designs or made garden furniture. The barrels laid on their side resemble a freight train with tanks. To make the composition lively and cheerful, it is necessary to decorate it and fill it with flowers.

Many children love to sculpt homemade products from polymer clay. Your child will be proud of the figurine that will decorate the cottage. In such a situation, it is better to make an exception and first make a figurine from polymer clay, and then choose a place for it on the site.

Beautiful figures are obtained from flower pots. It is convenient to fasten them by stringing them on a cord or wire. Of course, the more additional attributes, the more expressive the product.

Flower pots are especially good when used for their intended purpose: for planting flowers. Of course, additional handles, legs and decorations provide a bright expressiveness to products from pots.

Cones are an excellent natural material for garden crafts. Pine cones can be glued onto a plastic bottle using a glue gun. Add a pair of eyes from traffic jams, and you get a wonderful hedgehog. In the same way, you can paste over a concrete flowerpot with cones. It is convenient to mulch the soil under the plants with cones: the grass does not grow, moisture is retained, and the garden bed looks neat and unusual.

PVC pipes for water supply provide ample opportunities for country creativity. To assemble the samples shown in the photo, you will need a special welding gun. Seams and joints are neat and durable.

A variety of things, from the frame of the greenhouse to the cart, can really be assembled from pvc pipes. Of course, you can find many new ideas for making the necessary equipment on the farm from plastic pipes.

As you can see, with regard to decorations for a personal plot, there are no unnecessary things. From old plates you get a nice and durable fence for a flower bed. Beautiful mushrooms are obtained from plastic plates. Mushroom caps are glued to the legs of mayonnaise buckets. White spots of paint complete the design of the fungi.

A basin on a stump is a familiar story. However, you can complement the design with taste and zest. Evaluate the ideas of mushrooms from the basins presented in the photo and make it even better!

Miniature decorative house for a flower bed it is possible to make it yourself in a very different design. The house is complemented with elements of landscape design on a scale. The author is given the opportunity to realize those ideas that personal plot until it can be done. If a house for a flower bed is built from small pebbles on cement mortar, it will stay for a long time.

What is a cottage without butterflies? Consider different variants step by step:

1. Option #1 is made from a plastic bottle. The base of the butterfly is cut out according to a pre-prepared template. You can paint the wings with nail polish, acrylic and other paints. The body of the insect is made of beads put on a thin copper wire. They do the same with mustaches. The body of the butterfly is attached to the wings with wire through the holes in the latter.
2. Butterfly №2 is made of plywood. It is better to read about how to work with plywood in a separate article, which we have already mentioned.
3. Butterfly №3 is also made of plywood sheet with corks from plastic bottles fixed on it. Covers can be fixed with glue or screws.
4. The fourth butterfly is assembled from a PVC-coated metal mesh, which is held on a steel reinforcement frame. In the cavity of the wings, geotextiles are laid and fertile soil is covered. You will have to water the flowers more often, as the earth will dry out quickly.

As you can see, old buckets make interesting compositions, so you shouldn't throw them away. Of course, flowers in a flowerpot should be watered periodically as houseplants. We can give the only recommendation for making garden decorations from old buckets: do not slow down your imagination.

The mill enjoys the attention of the owners of garden plots. This option is based on the use of residuals building materials. On the roof we see scraps shingles, the second floor in the form of a ring is made from the remnants of linoleum, the body of the building is made from scraps of plastic siding. The whole structure is assembled on a frame of scraps wooden beam. It will be correct to use your own set of waste material.

Our own craft workshops for the yard

We repeat: the following items of site decoration are made by us independently and for this reason alone are original. You can familiarize yourself with the corresponding master class and repeat the homemade work. Particularly interesting are the methods of working with improvised materials, using which you can compose your own work.

The basis of the garden donkey figurine is plastic bottles. A solid-looking design requires relatively little time, tools and materials.

There is no easier crafts from canisters for the garden. This design uses an interesting technique for attaching horns, so it's better to see how this is done in the same article where we write about the donkey. Currently, the head of a ram from a canister plays the role of a "hunting trophy" in the garage and cheers up when returning home. Plastic cans also make interesting bird feeders, which we talk about in the corresponding article.

Palm from plastic bottles is known and popular. artificial tree may have various sizes.

A native made of plastic bottles will decorate the territory of your garden. We made him a bird scarecrow.

At first glance, it may seem that flowers from plastic bottles in the country are out of place. However, practice refutes such an idea: such decoration is not afraid of either drought or autumn.

A plastic bottle swan can be made using several technologies. The photo shows a simple and effective way: plastic plumage is attached to a plywood base.

It so happens that in the country there is no washbasin. It can be made from plastic bottles.

A repeller for moles, snakes and birds is often made from plastic bottles. We decided to give the rattle an attractive look and make it look like an airplane.

A reliable bird feeder can be assembled from a plastic eggplant. Our version is an imitation of a snowman, and best time think about it - autumn.

The simplest bird feeder is made from a bag. We decided to make the feeder in the form of a bus. This option is also described in the mentioned article about making feeders.

A simple-looking birdhouse is made according to " Canadian technology»: cardboard inside, plastic outside. We made a reliable, warm and comfortable birdhouse without boards and a hacksaw.

Best of all, a lamb is obtained from mounting foam. In our version, the hooves of the animal are successfully imitated plastic bottles Brown.

Fungus is a classic option for using gypsum to decorate a summer house. There is an incredible number of techniques for decorating a fungus.

What can you make unique garden crafts from?

For those who have skimmed through the contents of the entire article, the question posed by the title may seem redundant. However, looking at the above picture, you understand the fallacy of the impression. Let's try to list the possible options for improvised tools for crafts in the garden, supplementing the above:

• unnecessary furniture;
• old car;
• unusable household appliances;
• remnants of various building materials;
• branches, tree trunks, snags, stumps;
• metal and plastic cans;
• unusable clothes and shoes;
• unnecessary children's toys;
• unusable garden tools.

Obviously the list could go on. Thus, the most correct answer to the question posed is any improvised means!

For those who are passionate about decorating their yard and home with my own hands, there is a simple advice: rummage through the back streets of your property and before throwing away the unnecessary, ask yourself the question - what can be built from this?

What crafts can you do in the yard yourself?

At first glance, it may seem that you can make figurines, dolls and funny crafts. The presented images demonstrate that it is possible to build both the simplest useful things and full-fledged serious attributes of a country interior. Those who show perseverance, diligence and imagination will inevitably be rewarded with the result. For everyone who is seriously involved, (10 rated for 4,40 from 5 )

The fastest and most reliable way to fasten metal parts is electric welding. Anyone can learn how to handle it. Having bought either an inverter, as well as having spent half a pack of electrodes to gain practical skills, you can safely try to create metal crafts with your own hands. Installation of structures, repairs in the country, the manufacture of garden tools and much more from this moment becomes available.

The first metal crafts

Lots of people have welding. Often the device is purchased in case of construction or repair. It doesn't even have to be for yourself. If there is a need for it, you can call a self-taught neighbor or a familiar specialist welder. After the completion of the work, the unit simply stands idle.

But sooner or later the moment comes when you should decide and try to cook something yourself. There is nothing wrong with that, it would be a desire. The main thing at this stage is not to get burned and not to catch "bunnies", and experience comes with practice. If there is or Vacation home, there is always an application for welding. With its help, you can solve the problems of developing the territory much faster.

Not always and not everything can be bought in the store. Welding a gate, building a base for a bench or table, “grabbing” a hook for attaching a rope or an additional support for weaving grapes to a metal pole is kind of a trifle, but calling a welder over and over again for such an occasion seems inconvenient. So you need to learn the basics and solve everyday problems with your own hands.

Welding basics

Of course, you should not immediately take up serious work with responsible connections. You can practice on a piece of unnecessary metal. At the first stage, one should learn how to strike the arc and hold it, maintaining a constant working gap between the workpiece and the electrode as it burns.

After that, you need to work out the technique of forming a weld, fusing a layer of metal on a flat surface. Then you can proceed to adjust the current for different thicknesses of the workpieces to be welded. Welding is a technique for joining two metal parts, based on the melting of their surfaces at the junction. They are connected into one whole by adding a layer of electrode binder material.

The current is chosen in such a way as to ensure the melting of only the surface layer without the formation of holes. It is better to master the technique on electrodes with a diameter of 2.5-3 mm. They must not be old and must be dry, otherwise the first experience will most likely be ineffective, which may discourage learning to create metal crafts.

Welding makes it possible to correct minor and sometimes serious flaws in work or installation errors. It is enough to cut off the seam of the “tack”, and the parts are separated. After cleaning the place of unsuccessful welding, the process can be repeated.

Material

Any owner of a country house or the owner of a summer residence will surely have metal waste on the farm. This may be the remains of pipes after the installation of a gas pipeline, water supply or heating systems. The real owner usually does not throw away the remnants of the channel or pieces of reinforcement. You can also find used nails, bolts and nuts.

Such scrap metal very often becomes the material for a new repair or improvement of the old one. Surely there will be outdated garden tools, chains, old dishes, as well as spare parts from a car, motorcycle or bicycle that have not yet been handed over to collection points in the garage or shed.

From all this you can make useful and practical metal crafts. With your own hands, with the help of welding and the available helpers, you can repair old garden tools or make a new one from waste, given personal experience, their preferences and business conditions.

It is possible to equip comfort in the backyard territory without buying new equipment. From used, but still strong metal, you can build a base for a country table or bench. Find a suitable sheet particle board for countertops and bench boards will not be a problem. Racks can be made even from substandard inch pipe.

If there is a supply of material, you can also swing on a swing. It is better to make the structure capital, with concreting the base. We need two sidewalls of pipes welded at an angle, with jumpers for rigidity. The more massive the swing seat, the larger this angle should be. Jumpers can be welded at ground level or even lower so that they are not visible.

Hangers are best made from chains, but you can also take a reliable rope. The beam for fastening must be massive. A thick-walled pipe, a piece of rail or channel will do. It is best to fix frame parts and suspension brackets by welding.

At any cottage, with rare exceptions, there is a barbecue or other similar device. A couple of logs for sitting, an old stump as a table and burnt bricks to limit the fire and lay skewers - for some, this may be relaxation, but it is better and more convenient to use a more advanced design.

The brazier can be disassembled. You can bring it with you to your country house, it can also have a permanent place of registration with the possibility of transporting it to the place of storage. For such a solution, a brazier from an old steel barrel is quite suitable. You can make it on your own and get by with just a grinder and a drill. However, it will be better and easier if you use a welding machine.

An empty and washed barrel is cut along the vertical center line into two halves. Legs from a rod, fittings or pipe sections are welded to one part. The top part serves as a hinged lid and can be conveniently mounted on welded-on old door curtains.

Sheet metal crafts can be fixed by welding only after gaining some experience. In order to reliably weld parts and not burn a hole with an electrode, you should accurately select welding current and work with short tacks with constant quality control of the seam.

metal sculpture

The garden around a country house is not only a plot where trees and shrubs are grown to collect fruits and berries. It's also a place to relax! Garden sculpture will serve as an excellent addition to well-groomed plantings.

It may not necessarily be made of concrete or gypsum. For a person with creativity, there are no limits for its expression. If at the moment at hand only welding machine, half a pack of electrodes, scrap and a desire to create, then from all this you can build an original and unique composition. Moreover, the complexity of execution can be different.

It depends on the material available and on the idea. Such metal crafts for the garden in one case can consist of a dozen different, at first glance, incompatible parts of different origin and purpose. In another case, it can be made up of hundreds of the same type of repeating elements, connected by welding into a three-dimensional model.

Where to get ideas?

This question cannot be answered unambiguously. Someone, having seen random details in one place, imagines how they will fit together if they are combined into a common composition. Another purposefully goes to a scrap metal collection point and wanders around the mountains of this trash in search of a suitable part for the selected sculpture.

You can get ideas or just take as a basis someone's already implemented idea from specialized book publications that are dedicated to metal crafts. There is nothing shameful in creating a thing you like from improvised materials available on the farm.

In any case, do-it-yourself metal crafts created according to an existing drawing or sketch will be original. Welding is not copying, but a kind of creativity. Any that is made with a decorative design and repeats a pattern or composition is perceived as a kind of masterpiece.

Safety

So that do-it-yourself metal crafts do not serve as a constant reminder of bad experience welding work associated with burns or injury, care must be taken. It is strictly forbidden to work without a mask or shield, otherwise you can get ultraviolet radiation.

A protective suit will protect clothing and body skin from flying sparks and splashes of molten metal, and tight mittens or gloves made of dense material will protect your hands. It is not recommended to knock down the scale from the seam without goggles, sharp fragments flying in all directions can get into the eyes.

When working near wooden objects and surfaces prone to fire, you should have a bucket of water and a wet rag on hand. Accidental sparks or electrode residue bouncing off and falling on such materials can cause smoldering and subsequent ignition. When working indoors, you need to pay attention to proper ventilation.