For wires under the table. Cable channels for the table. The neatness of the office table is the key to a fruitful solution to the tasks

The system unit, monitor, landline telephone, scanner, lamp, printer have become familiar attributes of the workplace. Each of these devices has a wire for connecting to the network, as well as a cord-cable for connecting to a computer. Their location is not always ordered, which leads to twisting among themselves, bending, deformation. And this is fraught with failures in the work of office equipment. A cable channel for the table will help to carefully fix all the power cords, which you can buy at a reasonable cost on the site.

The neatness of the office table is the key to a fruitful solution to the tasks

Modern furniture is ergonomic. It provides mechanisms for lifting and changing the angle of inclination. Manufacturers offer a wide variety of accessories designed for rational organization zone of labor activity and keeping it in proper order. Thanks to them, it is optimized manufacturing process. An employee working at a PC does not need to make unnecessary movements. His actions are purposeful, which helps to increase their effectiveness. One of them is a cable channel on the tabletop, through which the electrical wires are distributed in a given direction, without tangles and bends.

The range includes various models:

• In the form of a metal tray square shape with a pair of hooks on each side.
• Horizontal rectangular configuration. Their frontal surface is rounded. In the central part there is a special fastener with a lock.
• Sliding. The main gutter is equipped with a retractable part that allows you to adjust its length to the size of the stacked electrical cords.
• Flexible for vertical placement. Their structure resembles the spine.

In any of them, you can hide from prying eyes not only the power cable, but also the surge protector, router. Some people think that the cable channel is for computer desk- the usual stub. This is an erroneous opinion. Blanking plug closes the hole through which the conductors pass electric current. And in the tray-channel they fit parallel to the desktop plane or perpendicular to it. At the same time, their static nature is preserved, regardless of the body movements of a person engaged in the performance of official duties. They are not touched by the technician, conducting wet cleaning premises. They do not interfere with the movement of employees and office visitors.

Advantages

The positive aspects of using a vertical cable channel for a table and its other varieties are obvious.

• Frees up legroom.
• Extends the life of electrical equipment.
• Electrical appliances operate in a safe mode.

To install them under the countertop, small niches / recesses are formed in the furniture items of the latest generations. If there are none, then the installation is carried out directly under the cover. It is not complicated and the user can perform it independently.

Are you having a hard time choosing? Call us! Competent managers will give detailed information on all issues of interest to you. We sell goods on favorable terms. Impeccable quality guaranteed!

An extension cord with chargers constantly gets in the way on the table or under your feet, collects a lot of dust, and it looks unaesthetic. Dealing with this problem is very simple: take a nice box, make a few holes in it and hide all the wires and cables there.

There are also ready-made solutions, such as Plug Hub from Quirky. This is a box made of hard plastic with a rubberized bottom. There are three holes on the top for cables, and inside there are three fasteners, on which you can wrap extra long cords. Plug Hub can be placed on the floor or mounted on the wall.

Amazon.com

2. Fix the wires under the tabletop

To fix the wires and extension cord under the table, you will need binders and screws (they must be at least a quarter less than the thickness of the table top in length, otherwise they will go through and the table will be damaged). First of all, fix the extension under the table top, preferably in the middle of the table or closer to the wall. Then fix the binders in the right places with screws. Connect everything you need to the extension cord and assemble the wires with clamps. Visually, the table has become much cleaner and neater.

There is a simpler option if you do not need to hide a large number of wires. This will require a construction stapler. To prevent the long wire from the lamp from dangling under your feet, carefully fasten it with paper clips at the table leg. A small extension can also be fixed with paper clips. For thicker wires, it is better to use special clamps (for example, these).

Do you like stapler staples? Regular zip ties will do. Secure the cable to the table leg with cable ties. The wires that run along the floor can be covered with plastic or a plank to match the color of the floor. The extension can be fastened under the tabletop using a wide Velcro: fix it with screws on the back of the tabletop, and then attach the extension. To keep the wires from dangling under the table, run them through cable ducts - these can be purchased at any hardware store. You can fix the channels themselves with electrical tape or a regular plaster.

3. Organize cable storage

Getting rid of the confusion in the wires will help their proper organization. To get started, collect cords from telephones, a player, game console, tablets. Then take the boxes (preferably prettier), place cardboard dividers inside them, sign the place for each cable (so as not to get confused later) and lay everything out neatly. To avoid tangling the wires themselves, use ordinary ties.

If you don't feel like messing around with boxes, buy a basket and stock up on toilet paper rolls.

If the wires do not bother you, you can simply attach a label to each to make it easier to distinguish between them. For example, like this:

4. Keep all the necessary wires close at hand

Not all cables we can hide in a box: we need some of them almost constantly. The solution is simple: mount them on the edge of your desktop so that you can reach out and connect the device to the right wire if necessary. Sugru will help us with this - plasticine-rubber and one of the most indispensable things in the household. Don't believe? Then look.

Roll the Sugru into small balls and place on a table support. Then, with a clerical knife, remove a little plasticine (carefully, try not to deform the balls much). Life hack: to prevent plasticine from sticking to the blade, pre-rinse it with soapy water. Then tweak the shape a little with a sushi stick or a toothpick to get neat hollows (they should be a little wider than your wires). Everything is ready, you can fix the cables.

There is an option for those who know how to work with wood. A small block with holes will help organize all the wires on the desktop.

The simplest solution is to pass the wires through the binders attached to the tabletop.

hexjam.com

5. Don't hide wires

Seriously, if you get creative, cables can be an interesting piece of decor.

Do you dream of order in the house, but something always prevents you from achieving perfect cleanliness? Start small! After all, nothing spoils appearance dwellings are like a bunch of wires scattered throughout the apartment. To solve this problem once and for all, we have put together 5 cool wire storage ideas that will help you quickly get rid of the endless mess.

decorative coil

An ordinary spool of thread is perfect option for storing thin earplugs. It is enough to wrap the headset cord around the bobbin, and place the earbuds inside the cone. This storage system is compact and versatile. It is easy to take with you by throwing the organizer into a bag or pocket. And most importantly, such an organizer is sure to be found in every home. And if not, you can find a pretty spool at any craft store. Try this life hack and you will quickly forget that the headphones were once confused.

For longer wires, you can easily make a coil bigger size with your own hands. To do this, you will need two unnecessary CDs and an empty reel of tape. We glue the discs to the reel: top and bottom. And that's it - the organizer is ready. If desired, you can decorate the spool with decorative paper, paints or beads. It remains only to wind the cord and make a marking on one of the disks.

Leaf ties

If you want to securely fix the cords that randomly stick out throughout the apartment, then original decorative leaf-shaped ties will come to the rescue. Such collars will help not only to restore the long-awaited order, but also to decorate the interior. To get rid of the mess created by the wires from the computer, TV and other devices connected to the network, connect several cables together and wrap them with a tie. Secure with a special fastener, which is located at the end of the clamp. Ready! Without protruding wires, the room will look much neater, and green leaves will give the interior freshness and lightness.

Also, ties will help to neatly fold the wires stored in boxes or containers. It is enough to bend each cord in half and fix it with a clamp. Now the cables will not be tangled during long-term storage. By the way, clips for bread bags, ropes and even beads can act as clamps.

Homemade organizer

You will need a regular shoe box and a few sheets of cardboard. On the agenda is an organizer with cells that will help you neatly sort large collection wires.

So, take the cardboard and cut out several rectangles from it so that they match the height of the box, and are several millimeters shorter than it in length. If desired, you can glue the cardboard with decorative paper, cloth or decorate it with acrylic paints. Next, make several vertical slits on each rectangle. Each cut should reach the middle of the cardboard.

Make markings inside the box for future partitions. And assemble the inner lattice by connecting the rectangles along the cut line. It remains only to glue the finished cells to the box using superglue or double-sided tape. Be sure to sign each compartment. Let the glue dry and that's it - you can fold the wires and put the organizer on a shelf or in a drawer.

If you do not like DIY projects, you can easily purchase a similar organizer in hardware stores. There you will find a huge number of organizers with cells, made in different sizes, colors and different materials.

Cosmetic bag with pockets

There is nothing easier than hiding the wires in a textile cosmetic bag with small pockets. If you use such an accessory for storing wires, then be sure that your desktop is reliably protected from clutter. Just fold the cables and put each in a separate pocket. And in order not to confuse the cords, mark with colored adhesive tape.

The textile organizer is convenient and roomy, and it also helps to save a lot of space. After all, you can roll it up and put it in a box, or you can unfold it and hang it on a hook. With such an assistant, you can organize the storage of wires anywhere: on the wall, in the table, under the table, on the cabinet door, and so on.

Instead of a cosmetic bag, you can use a case for storing brushes. By the way, needlewomen can sew such an organizer with their own hands. It is enough just to sew a wide elastic band to a piece of dense fabric, leaving small gaps along the seam. These gaps will serve as pockets for storing wires, and an elastic band will securely fix them in one position.

Cells from cardboard tubes

Cardboard tubes are a very easy and cost effective way to organize wire storage. This is another variation on the theme of containers with cells. Storage compartments can be made from toilet paper rolls or cardboard sheets. It is enough to take as a basis a few bushings from toilet paper or twist sheets of cardboard into a tube and add a little originality to the future product.

Plenty of decor options. Cardboard can be pasted over with paper or cloth. You can wrap each tube with jute rope or spray paint. You can even add decoupage. In a word, there are no barriers to creativity here.

After the design is completed, and the paint and glue, if any, have dried, we proceed to assemble the organizer. There are also several options: superglue, double-sided tape or rope. Depending on the chosen method, we simply glue the cells together one by one or collect them together and tightly wrap them with a rope.

It remains only to choose where to place the finished cells. Perfect for this purpose Plastic container or cardboard box. However, if nothing of the kind was at hand, you can simply put the cells in a drawer.

Such an organizer is useful for storing both large chargers and thin headphones. And so that not a single wire is lost, sign each tube with a marker or stick a paper label on it.

On the eve, everyone is trying, if possible, to provide for the location of office equipment and move it under it. But what if you change providers and the new carrier has installed its own modem, and it requires additional cabling, or you just moved the location to another room? Do not ditch all the walls again, because you can be creative and hide an unsightly cable. In the review of the editors, the site is 5 simple, but effective ways how to hide wires and office equipment in any room, turning them into a unique art object. It's time to eliminate all imperfections and bring to life the most non-standard ideas.

The easiest solution is to install, which today are offered in a wide variety of sizes and shades, but this is too simple. Shouldn't we use decorative clips as fasteners, which will additionally hold and guide the cable? On sale are cute collars in the form of leaves, birds, and camouflage covers are also produced in the same theme, which can be beaten with bright stickers or drawings.

You can group the wires on the wall in the form of a decorative tree with lush foliage, here artistic skills will come to the rescue or. In a few minutes, the cable from a chaotic tangle will turn into a blooming garden.

You can beat the cable stretching along the walls decorative fence, and in order for it to lie neatly behind it, you must first fix the wires with zip ties or hook holders with an adhesive base. In addition, the mount can be made from ordinary Velcro, choosing a color that suits the interior.

Turn wires into art

If the wire footage is very large, and you do not plan to replace them with shorter ones, you can make a real one on the wall, which will immediately attract attention. This design will fit perfectly into a vintage, retro or design, for this you need a minimum set of tools and fasteners.

Get creative: just decorate the cable with a bright ribbon, beautiful beads or a thick rope - here you can show your imagination to the maximum, it all depends on your creativity. In any case, the wires will be grouped in one place, and not just randomly scattered around the room.

How to fix the wires near the desktop

If installed against a wall, you can close the hanging wires with a beautiful curtain, panel, or fix them with decorative hammocks. For an extension cord that constantly gets in the way on the floor, a small box will do, it will also protect it from dust. Be sure to make a few holes in it to bring the cable out.

If you are a device lover, interesting idea for grouping wires - installing a decorative stand in the form of an electric tower on the working surface. And you can also put an unusual box on the table with holes for the output of wires, which are easily connected to the equipment at any time. It will not take up much space, but at the same time, it will hide the mess and allow you to comfortably organize charging device for gadgets and wires from headphones.

New manufacturers for fastening wires

Manufacturers help solve the problem of wires around and release original novelties. We offer you to get acquainted with interesting inventions.

• a set of holders for fixing wires, which contains clamps and Velcro of various parameters;
• screen with holders for wires of office equipment. You can fix it on the back or side wall of the desktop;
• install an additional shelf under the tabletop, or even better - buy a special separatorwith which the wires will always be in order. If necessary, you can remove one of them without affecting the others.

How to hide office equipment in the interior: 5 non-standard solutions

Printer, copier, scanner - such a set of office equipment can be found in almost every home. There is not always a place for a full-fledged organization of a working office. Here are some tips from professional designers to help:

• movable or a module with shelves that can be removed under the table and rolled out if necessary. The technique will not take up space on the desktop and attract attention;
• decorative for the printer, in which you need to make holes for wires and paper. On the desktop or nearby, it will look very impressive. If a wicker product is not suitable for the interior of the room, you can cover the printer with a beautiful box;
• you can put the printer in a desktop drawer or chest of drawers;
• install an additional shelf under the table and put the printer on it. It is necessary to provide for its location in such a way that there is no discomfort for the legs;
• disguise the technique as books by setting it open next to the desktop. Beautiful bindings and folders will distract attention.

Or maybe it's time to get an improved technique? After all, printing is no longer so relevant, now it is much more convenient to use a scanner and send documents over the Internet. Therefore, instead of a copier and a printer, one scanner is needed, it takes up much less space and may well fit in a desktop drawer.