Do-it-yourself bench from chairs. Original and useful ways to remake old chairs. To make a comfortable stool, you will need
Old chairs are a real storehouse for the realization of creative fantasies. All ideas are easily implemented at home, and the result will exceed expectations.
Several chairs, connected by boards, turn into a comfortable bench or trestle bed. For these purposes, it is necessary to select chairs of the same height, preferably in the same style. After final assembly the tree should be sanded, chipped and painted for greater safety.
You can play with the shapes and arrange the chairs not in a row, but in a circle. All furniture that will be used outdoors must be carefully treated with solutions that save wood from decay. This will allow you to extend the service life as much as possible.
How often does a chair serve as a hanger in the house? So why not use it for the same purposes, but ennobling appearance.
Wall-mounted chairs turn into unusual shelves. In this case, the chair can be used as a whole, or you can leave only the back and seat.
It will be unusual to use a chair as a shoe holder. Instead of a soft seat, a basket is installed. You can do without it, but this increases the usable volume of the shoe rack, and inaccurately placed shoes will not end up on the floor. This solution will help save space, and at the same time the shoes will always be in order and at hand.
In the country, the chair can be used not only as a bench, but also as an art object. Instead of sitting or on the seat itself, you can put flower pots or cute little things. Such a chair should be treated with stain and varnish, after drying thoroughly - this will help save the tree from moisture for the longest possible time, because the flowers will have to be watered quite often.
The chair looks unusual as a storage for small things.
From a chair with a strong seat and back, but legs that have become unusable, you can make a garden swing. A synthetic or hemp rope is suitable for suspension, and in order for the swing to be removed, it is better to mount it on a carabiner for climbing equipment.
Chairs will also come in handy for lovers of our smaller brothers. They will make coasters for bowls and places to rest.
If you have enough experience, you can carve skids from wooden bars and install a chair on them. It turns out a rocking chair.
From the bottom of the chair is obtained coffee table. Synthetic materials are best suited for weaving - they will not stretch over time as much as natural ones.
Old chairs will be a great source of inspiration for transforming the interior. Using fantasy, you can do not only new chair, but also convenient and useful things in the household.
To garden plot was comfortable enough, it should be properly equipped. An important component are garden benches. You can make them yourself different ways and from various materials.
Bench made of concrete slabs and boards with a back
Looking at the drawings of the bench, you can find out the features of its device. You can make such a design with your own hands relatively easily, quickly and without high financial costs.
Making a bench with a backrest with your own hands step by step instructions described in great detail.
Assembly: the initial stage
After preparatory work the wood processing time is right. In order for a do-it-yourself bench with a back to serve for a long time and decorate the site, it is necessary to pre-process the materials.
wood cover antiseptic formulations and let dry. After that, you can start collecting backs.
On one of the two-meter boards, fifty centimeters are measured from the edges. At this level, the edges of the white will be located.tons of slabs. From this mark another fifteen centimeters are measured to the center of the board. Here the first boards will be attached. From the resulting marks we measure seventeen and a half centimeters - the gap between the boards of the back. Next, we measure fifteen centimeters for two more boards. Between them there should be a gap of five centimeters. All this can be seen in the drawing.
Wood glue is applied to sections of fifteen centimeters. Boards are applied to them, the length of which is sixty-five centimeters. Additionally, they are fixed with self-tapping screws.
From above, between the boards of the back, pieces of seventeen and a half centimeters are glued. In order for the parts to stick together well, they are clamped and held until the glue sets. After gluing is completed, the back is covered with an antiseptic.
All wooden details can be covered varnish. This will give them additional stability and attractiveness.
Assembly of the main part
It is better to collect the main part of the bench from two sides. Concrete slabs are placed between the boards, and in drilled holes insert threaded rods M16 fifty-five centimeters long. They will need four pieces.
The rods are fastened with nuts and washers M16. They are twisted at the same time from different sides to make the bench even.
A simple bench with your own hands
You can make benches for giving with your own hands quickly enough if you follow the instructions. Consider four options for such garden structures.
On drawings benches detail all its features. Making such a bench with your own hands is quite simple. The only difficult element is the concave seat.
The number of parts and their dimensions are indicated in the table.
The manufacture of benches with their own hands from wood begins with blanks necessary details. Boards and timber are sawn into pieces of the desired length.
The manufacture of seat supports will be somewhat more difficult. You will need to markup on the blanks. Two points are marked along the edges at a distance of seven and a half centimeters from the bottom side, and in the center a point at a distance of four and a half centimeters. They are connected using a flexible plastic ruler and cut out jigsaw. Sections are treated with sandpaper.
Seat supports are attached to the two upper tsargs. One on each end and one in the middle. Next, the supports are screwed, spaced from the extreme ones by the width of the legs. All connections are made with self-tapping screws.
Boards are attached to the resulting base seats. It is desirable to deepen the hats of self-tapping screws.
Then attach legs. They are attached to the seat supports. The lower tsargs help to fix the legs.
The finished product is covered antiseptic and varnish.
Simple bench #2
To make such a garden bench with your own hands, you will need concrete flower girls and boards. Flower girls are required to create the base of the bench. Use two with a rectangular base and two cubic ones.
In order for the base to be stable, the flower girls must be glued or connected from the inside with staples fixed with self-tapping screws. A layer of drainage and soil is poured into the tank. This increases their stability.
The seat for the bench is made of boards. To do this, they are cut into segments of the desired length. These blanks are laid so that they have a distance of half a centimeter. Then they are connected using cross bars. Planks are placed in three places: along the edges and in the middle. Corners are attached to the planks. With their help, the seat will be fixed on the flower girls.
Do-it-yourself bench with a back
Prepare the details of the bench shown in the figure. They are processed antiseptics before connection.
Then the supports are assembled from the parts. Pre-round the corners and chamfer. First, parts A and B are connected with a bolt, and then B, C and D are also connected using a bolt.
The inclination of the back is determined by part D, after which it is connected to part A. Similarly, but in a mirror image, another support is made.
After that, the back and seat are assembled. To do this, the supports are placed so that there is a distance of twenty centimeters between them. First, the front and rear bars are screwed to the supports, then all the others, and finally the stops are screwed.
At the last stage, the back of this bench is screwed.
Bench #4Another option for a simple do-it-yourself bench. Its length is one hundred and twenty centimeters. The height from the ground to the seat is fifty centimeters, the height of the back is also fifty centimeters.
The base is made from boards, whose thickness is five centimeters, and the width is from ten to twelve. One of the legs continues and is the backrest support. The supports are connected according to the “half-tree” method and fastened with bolts.
The basis for the seat is a bar fixed on self-tapping screws. The short legs on the back of the bench are colleted together to increase stability. The seat and back are sheathed with boards with a smaller thickness. The surface is painted or varnished.
A simple bench with a back for a summer cottage
The dimensions of the structure and wooden parts can be seen on drawings benches. If we consider how to make a bench with our own hands, then this option will be the most optimal in terms of the simplicity of the process and the result obtained.
Materials are best purchased already cut to size. If there is no such option, then you need to cut them yourself.
The resulting blanks polished. The ends of the boards are treated with an electric planer.
The rear legs of this simple do-it-yourself bench are also a support for the back. To create the desired level of inclination, the blanks are marked.
At a height of forty centimeters mark the place of attachment seats. Above the board is cut at an angle of twenty degrees. The cuts on the two blanks should be the same.
Gather first legs benches: the front ones are connected to the back ones with a beam. It is better to do this from above and below.
When the side parts are assembled, they can be connected to each other with seat boards. Screw the boards with self-tapping screws, leaving distances of one or two centimeters.
To strengthen the structure and increase its stability, make the lower strapping bar on the legs. Two boards are attached to the back.
Finish the work with a finish coated which will protect the product from moisture and adverse conditions.
Do-it-yourself pallet bench
Make a bench with your own hands pallets It's easy if you use your imagination. This will require three or four of these wooden structures. Some will need to be cut to get additional details. The most simple design do-it-yourself benches from pallets, when two pallets are attached perpendicular to each other, creating a back and seat.
So that the design does not turn out to be too cumbersome, it is better to cut the pallets to the desired dimensions. Fasten the elements with self-tapping screws. Add side details that enhance strength and make legs. All this can be seen in the photo.
Since the material of the pallets is raw, rough, it will need to be preliminarily grind. This will allow you to do without splinters.
The manufacture of benches with their own hands from pallets is being completed with varnish or paint.
Bench puzzle
You can make such a bench with your own hands if you have a wide board and shovels for shovels. Figured seats are cut out of the board in the form of puzzle pieces. Legs from cuttings for shovels are attached to them. Separate stools are obtained, which are quickly assembled into one long bench. All manufacturing steps are detailed in step-by-step photos.
Benches from unnecessary chairs: two do-it-yourself options
First option
To create such a bench for a summer house with your own hands, you will need four old chair.
From the first two chairs filmed parts on the front of the seat.
The rest sawed off the front legs are slightly lower than the seat structure.
From the resulting details you need take off old varnish or paint. To do this, a special agent is applied to the parts that dissolves paint and varnish coatings. Then the softened layer can be removed with a spatula.
The racks should drill dowel holes. Holes are required on the front and end sides.
The dowels are smeared with glue and inserted into the drilled holes.
When the dowels are glued, you can collect base benches. To make the design durable, the parts are fastened with self-tapping screws. Construction surface sanded.
For seats benches choose a board that is suitable in size, saw off the excess.
If several narrower boards are used, then they are glued together with wood glue. For a tight connection, they are clamped with clamps and waiting for the glue to dry.
The finished seat is also glued to the base with wood glue. Heavy objects are placed on the board and clamped together with the base with clamps.
When the glue dries, cover the seat with masking tape and stain other structural elements with wood paint.
The adhesive tape is removed and the seat is processed wood stain. In conclusion, the entire bench is varnished.
Second option
To make a second garden bench with your own hands from old furniture you will need two chairs. It is better if the back and hind legs are not separated.
Two identical chairs clean up all parts of the structure except for the rear legs with a back.
take bars 5 cm wide and 3 cm thick. Two pieces are cut off, equal in length to the width of the chairs, and two pieces of the same length as the finished bench will be. From these four parts, a rectangle is assembled. It is fixed to the backs of the chairs with self-tapping screws.
Another frame is assembled in the same way. Several cross bars are attached to it. This design is attached under the seat, makes the bench more reliable and plays the role of a shelf.
If the chairs are old coating then remove it with sandpaper. After that, the surface is puttied special composition or primed. When the layer dries, it must be sanded with fine-grained sandpaper. At the end, the structure is covered with paint.
Do-it-yourself seat for a garden bench is made from Chipboard or plywood. A rectangle is cut out of the selected material, which is larger than the base by half a centimeter on each side. Then cut out a piece foam rubber with the same dimensions. A rectangle is cut out of the upholstery fabric. It should be larger than the seat by five centimeters on each side.
Foam rubber is laid on a sheet of plywood, it is covered with a cloth on top. The fabric is fastened from the inside with furniture stapler.
The seat is attached to the base with a piano loop.
Bench-swing
To make such a bench for giving with your own hands, you should prepare necessary materials. Start manufacturing by creating basics designs. The seat bars are attached to the back bars at a selected angle.
Along the seat install additional ribs providing rigidity.
Attached to the seat planks, drilling holes in the base bars for fastening. The same goes for the back.
Armrests are installed on both sides of the seat. They can be bolted on.
The resulting bench cover wood preservatives and varnishes. It is very important to paint over everything as carefully as possible.
The bottom of the bench is reinforced with metal profile. Chains are attached to the profile, on which the swing bench will be suspended. Be sure to check the reliability of the beams on which the bench will be suspended.
log bench
To make such a bench with your own hands from wood, you will need chainsaw. A thick log one meter long is taken as the main material.
Log mark out, to get two slightly unequal parts. The back will be made from the smaller one, and the seat from the larger one.
Chainsaw log sawed along the mark. The resulting irregularities are immediately cut off with the same saw.
The cut triangular piece is cut into pieces and inserted into the holes in the seat. The back is fixed on top. The bench is almost ready. It remains only to give it a more decorative look.
Can the seat be placed on legs. To do this, recesses are made in the lower part for installing a pair of logs as legs.
Bench-transformer
Design features of the transformer can be seen in the drawings of the bench. A do-it-yourself transformer bench is made from planed boards, which is cut to the named sizes.
In sliced lumber details holes for fasteners are drilled.
At the tabletop, boards located on the edge can be made wavy.
In material intended for countertops, drill holes with a diameter of twenty-two millimeters and a depth of three centimeters. Cuttings of the same diameter will be inserted into them.
The edges of parts and edges are processed and rounded. 
The assembly of all elements is carried out with screws and screws. Screws are needed with dimensions 6x70 and 6x90, screws - 8x80.
Wooden parts stain stain.
The structural parts that will move are connected by hinges.
Between the boards of the tabletop place parts of a round cutting.
Set the stop for backs.
A do-it-yourself transformer bench is covered varnish.
rocking bench
Making an original bench with a backrest with your own hands is not difficult if you have the tools and materials. First you need to consider the drawings of the bench, which contain a small amount of detail.
The side parts according to the pattern are transferred to euro plywood three centimeters thick. They are cut with a jigsaw and the ends are processed with a grinder.
To fix the connecting strips, markings are made. Then holes are drilled. After assembling the frame, the rails are fixed with self-tapping screws. The attachment points are spatulated, and the product is completely varnished.
Bench around a tree
The simplest version of such a bench - hexagonal. The size depends on the size of the tree. Measurements are made at the height of the seat. To the result obtained, another margin of fifteen to twenty centimeters is added. If you divide the result by 1.75, you get the length of the inside.
For cutting boards ten centimeters wide are laid in four rows at intervals of one centimeter.
The cut point is marked immediately for all rows with an angle of thirty degrees. So cut out six sets of blanks.
Legs are used with a height of sixty to seventy centimeters. They are connected by crossbars by drilling holes and using bolts with nuts.
The seat is installed so that the joints are located in the center of the ribs of the legs. Screw the outer pieces first, then the inner ones. In this way, the entire hexagonal structure is assembled around the tree.
At the end, they make a back and mount an apron. The result is a circular bench with a do-it-yourself backrest.
The finished product is processed oil impregnation.
Bench made of curved branches
A bench made of curved branches will look original. For you will need branches for the front, two legs, a horizontal top and a pair of transverse branches.
Sawing branches so that they match each other as accurately as possible. Then they are connected with metal corners.
Similarly, the back is made and connected to the front.
The finished product is placed on a flat area and the seat is assembled.
Bench options
- log bench which blends in well with the natural environment. It consists of half a log used for the seat, and two short round logs that are legs.
- Beautiful wooden bench with a back and armrests, reminiscent of a sofa. Curved and carved elements make it more attractive, while left knots and bumps give the design a natural look.
- Bench made of wood and metal. The base of the structure is metal. The wooden parts of the seat and back are fixed to it. Due to the small thickness of the metal parts, it looks light.
- A bench of a simple, classical form. It is made of wooden, rather wide boards. This width allows you to comfortably sit on the bench. Armrests make the design more complete.
- original bench made of wood with curly details. This option is well suited for a site with a natural rural design. Carved legs and armrests, figured back - all this gives the product originality.
- Bench with an interesting back. The curved parts gradually deviate back, creating a unique design. The seat is slightly curved but has a more traditional look.
- Wood complex- a table with two benches. The design looks traditional due to the material used. original solution is the fastening of all components into a single structure.
- The bench is made from solid wood. A single piece is cut out of it, combining the back and seat. The legs are attached to the bottom. The log is required quite large.
- Bench with storage box for toys. Outwardly, it looks like an ordinary wooden bench-sofa, but under the seat it has a box in which you can put various things.
- Comfortable wooden bench with a simple shape. The base is made in the form of a rectangular box. The back is also simple with a straight shape. The seat is padded with soft cushions for added comfort.
- A wooden bench placed around a tree. It is made as if it consists of four benches, each of which has one armrest. The composition looks attractive and comfortable.
- Bench of a simple form from wide boards. It looks solid, but its dimensions are somewhat hidden due to the gaps between the boards and the light blue color in which it is painted.
So do not rush to get rid of it. Using your imagination and our tips, you can make a new set out of this furniture. In this homemade craft, we will tell you how to make an original bench out of old chairs. This option is not only convenient, but also very interesting. You can put such a bench in the courtyard of the house or in the country. The original bench will become an unusual piece of furniture.
For the manufacture of this homemade product you will need the following materials.
materials
Old chairs (4 pcs);
Band saw;
Jigsaw;
Drill and drill bits for wood;
Dowels (wooden);
Paint and varnish remover;
Joiner's glue;
Putty knife;
Varnish on wood;
Dye;
Brush;
boards;
Meter;
Marker;
Step 1.
You must first take two chairs and carefully remove the horizontal racks that are in front of the seat.
Step 2
Now we take the remaining chairs. With the help of a meter and a marker, you need to make a mark where the cut line will go. This line should be slightly lower than the front seat post. Take the saw and carefully cut the legs along the marked line.
Step 3
At this stage, it is necessary to remove the old varnish and paint from the chairs. To do this, apply a uniform layer of a special tool for this work. Wait for the required time (it is indicated by the manufacturer of the product). After the required period has elapsed, carefully remove the old coating. To facilitate the work, you can use a spatula, as well as sandpaper (fine-grained)
Step 4
Now you need to drill holes for the dowels in the racks from the front and end sides. First you need to make a mark with a marker where these holes will be. Then take a drill and drill holes.
Step 5
Take the dowels and insert them into the resulting holes. Before this, be sure to grease the dowels with glue (carpentry)
Step 6
After the dowels are firmly glued, it is necessary to assemble the future base of the bench. This must be done as shown in the photo below. All components of the bench are fastened together with self-tapping screws. After that, the entire surface of the bench is sanded again.
Step 7
At this stage, we will make the seat of the bench. For this we need a board. The board should be adjusted to the size of the bench. It is necessary to mark the desired length, and cut off the rest. Back height is up to you.
Step 8
If you decide to make a seat from several boards, then they must be glued together with wood glue. After that, the entire structure should be clamped with clamps and wait until the entire structure is completely dry.
Step 9
Now you need to glue the seat to the base of the bench. Lubricate the base and the seat itself with wood glue. Put weights on the board, and also clamp it with clamps.
Step 10
Wait for complete drying. After that, take masking tape and paste over the surface of the seat with it. The remaining parts of the bench should be painted with special paint for wood.
If you find that an old chair is completely worn out, do not rush to throw it away. Often old pieces of furniture bring with them pleasant memories of people and events in the life of your family. And to be honest, before furniture was made for centuries ...
Therefore, the restored chair may well serve not only you, but also your children. Simply by changing its appearance, you can return the furniture to its former attractiveness and novelty. Fortunately, there are many options now. Everything will depend only on your imagination. 
How to update an old chair? Precleaning
To begin with, the surface of the chair must be cleaned of the old coating, whatever it may be. If there is a soft seat upholstery, it must first be removed. To do this, it does not necessarily require "male power". Try turning the chair upside down and you will see that the seat is held in place with screws that need to be removed. To do this, you need to arm yourself with a hammer (for knocking out the seat) and a screwdriver (straight or Phillips).
Now you can start removing the old coating. To do this, you can use the usual "sandpaper" of different grain sizes or a grinding sponge. It is important to sand the surface of the wood well. This will help to easily apply the coating of your choice in the future. Needless to say, this job is not easy.
But it is possible to simplify the process a little by periodically moistening the surface to be treated. This way you can get rid of the dust. Just do not be afraid that the old varnish becomes viscous from moisture. This is fine. After the chair is completely dry, you need to once again sand the entire surface well with fine “sandpaper”. 
How to update an old chair? All right
Now it all depends on your imagination. If you decide to varnish the surface of the chair, then you need to use a colorless primer so that the texture of the wood is clearly visible through the protective layer. A layer of primer will have to be used in any case. Even if you decide to paint the chair later.The fact is that the paint lays down better and lasts longer if the surface is pre-primed.
It is necessary to cover the surface with varnish in two layers. It is important that the first layer is well dried before applying the second. The varnish can be applied with a brush or sprayed on the surface.
You can paint the chair in any color. Now furniture is considered very fashionable. white color. And the upholstery of the seat can be chosen in contrast. Now there are many ways to show originality. For example, use a stencil. Let it be flowers or any other ornament.
Another way to cover the surface of the chair is with beeswax balm. The surface is also pre-sanded and primed with drying oil. Then cover with a thin layer of balm with a cloth. After twelve hours, the surface is polished with a brush.
Now you can start restoring the upholstery. The old one must be removed. Previously, it was attached to the seat with ordinary nails. You will also have to get rid of the foam rubber. It is necessary to cut a new one according to the old standards. The fabric needs to be cut with a margin for hem. Upholstery material can be very different: as a special fabric for upholstered furniture, and ordinary linen or thick cotton. It is better to fasten the fabric with a furniture stapler. But if you don't have one, don't worry. You can use ordinary nails by nailing them with a hammer. It is important to remember that the material must be well stretched on all sides.
Now the seat can be inserted into its original place and fastened with screws.
Upgrade an old chair with a slipcover
There is another way to update an old chair - use a cover. It can be made from any fabric, hiding defects and imperfections without major intervention. The cover can be with a variety of frills, ruffles, bows, tassels ... You can make several options. Festive and everyday. Show your imagination! Don't rush to throw away old furniture, try to become a designer, we are sure that you will succeed!
Sometimes old unnecessary things can be turned into a decent and functional decoration for a summer residence. In today's review, we will talk about old chairs, from which, with a little imagination, you can make really interesting decorative, and in some cases functional items: garden flower stands, coat hangers, shelves, swings, benches, etc. Below are examples of what can be made from unnecessary chairs. Let's get started...
1. Hanger.
A necessary thing in everyday life is a hanger, it can be in the form of coat hangers or wall-mounted. Variant with wall hanger easy to implement, for this you just need to remove the back from the chair, tie a rope on its upper part, drive a carnation into the wall and hang this design on it.
Hanger hangers, in general, are also not difficult to make, for this you need to stock up on curved hooks, the size of the crossbar in the closet and the backs of unnecessary chairs. With a thin drill in the upper part of the back of the chair, it is necessary to create a hole into which to insert pre-prepared hooks, covered at the base with a generous layer of glue.
2. Swing.
Great idea for making a swing seat. It is necessary to take a seat with a back from an unnecessary chair, nail two crossbar boards from below, along the edges of which drill holes into which to thread the ropes. Fix the finished rocker on a strong tree. Children will be delighted, especially if the seat is painted in some bright shade.
3. Armchair from an old stump.
There is an old, hard-hitting stump in the garden, so why not make an attractive chair out of it. To do this, take the chair seat and glue or nail it to the top of the stump. The seat can be painted in a bright shade or decorated using decoupage technique.
4. Rocking chair.
Many people dream of a rocking chair, but it can be made from an unnecessary chair. To do this, you need to order semicircular crossbars from the carpenter or remove several planks from wooden barrel, and fix a chair on them.
5. Bed for a pet.
Below you can see how loving owners delight their beloved pets. To make such a bed, it is necessary to prepare a box in which to put a foam mattress, make the headboard from the back of the chair, and the foot from the legs of the chair.
6. Bench or bench.
On three chairs without seats placed in a row, you can lay a board upholstered with a material that is pleasant to the touch with a layer of foam rubber. Various options impromptu benches can be studied in the photo below.
7. Support for a bowl of a large dog.
A large-sized pet can be fed from a bowl fixed on the seat of the chair, for this we simply cut out a circle in the seat of the chair with a jigsaw according to the size of the bottom of the bowl. Thus, the dog will not be able to throw a bowl of food or water.
8. Shelf.
From the back of the chair, as well as part of the seat, you get a great shelf for small things, options for such shelves can be seen in the photographs below.
9. Sledge.
And here is another great idea on the topic “what you can do with old chairs with your own hands” - a sled. Very interesting idea, but requires design, the location of each detail must be carefully considered so that in the end the sled is safe to operate.
10. Flower stand.
The most popular idea for using old chairs is a garden flower stand. To make such a decorative element, it is necessary to cut a hole in the seat of the chair according to the size of the future pot installed in it. The photo below shows the process of making such a stylish garden flower stand.
More examples of flower stands:
11. Storage box for magazines and newspapers.
From the legs of the chairs you can put together a magnificent box for storing correspondence - newspapers, magazines, letters.
Also, the box can be made from flat boards, and fixed between the legs of the chair at an angle, as in the photo below.
12. Bright chairs.
This item involves the restoration of an old chair, or rather sanding it, and then painting it in a bright acid shade, as a result, the chair turns out to be so fashionable that it is simply impossible to guess about its previous deplorable state.
Flower stand from an old chair:
After this review, the question of what can be made from an old chair should stop bothering you, it remains only to choose the right idea and start implementing it. It would seem - an old chair, well, what can be done from it, someone can say "throw away and forget", but in fact in the country the above ideas will be very relevant, so if you have such retro items in your house, do not rush to dispose of them, at present, this nostalgic direction is in great demand.
The interior portal "Decorol" invites its readers to subscribe to receive interior ideas on their own email, the subscription form is in the sidebar.
