DIY wall hanger in the hallway: with a shoe rack, with a shelf, with hooks. Forget about lack of space! Let's make a hanger from a tree trunk with our own hands Making a hanger with our own hands

In this article, we will look at best ideas hangers with their own hands. A handmade product is of great importance, even such a seemingly inconspicuous thing as a hanger. There is nothing difficult in this, so even a beginner will cope with this activity.

Material for work

There are many ideas for making an unusual hanger, but we will consider wood as a material. A list will be given as tools, with the help of which you can easily make a hanger with your own hands.

So, you will need the tree itself, from which the hanger will be made, a screwdriver and screws, a grinder for external cutting work, dowels, if it is understood that the hanger will be screwed to the wall, a drill or you can get by with a screwdriver, a pencil, a tape measure and a level, hooks for clothes and sandpaper for surface treatment.

floor hanger

Consider detailed instructions how to make a hanger. As materials, you will need six copper elbows, four tees, also four plugs that have the same diameter, as well as a wooden stick with a total length of about 5.5 m. It is necessary to make a frame in the form of a rectangle, and as a stand, make transverse legs in the same way that will hold the structure.

For greater reliability, we recommend smearing all holes and joints with glue, so your hanger will withstand optimal loads. On the one hand, this hanger will interest passers-by with its “copper” solution, and on the other hand, it will be reliable and durable.

Wooden wall hanger

This element is mandatory for use in the hallway. Therefore, you can make this piece of furniture from wood, or you can take chipboard to save money. A minimum of tools is required, including a screwdriver, drills, a drill, a pencil and a tape measure, as well as hooks for clothes.

The manufacturing principle is quite simple, for this you need to screw the hooks to the base, and then hang the finished hanger on the wall.

However, there are more interesting options. For example, instead of hooks, you can use hammers, five or six tuk in this case will do just fine. To do this, you need to saw off the handles of the hammers almost at the very base, and then attach them to wooden base across the surface so that clothes can be hung.

Hanging and floor hangers handmade, which are made in a non-standard form, attract attention and look very original and interesting.

Non-standard ideas

As an extraordinary way, you can use a hanger wall, on which there are many hooks of the same or different styles. This will require only a free wall, as well as a lot of hooks.

Many in modern world use a pitchfork or a rake to make it a hanger. Of course, it will be necessary to process and improve the tool, as well as cover the sharp ends so that no one gets hurt, but the result will bypass all expectations, since no one is ready to see this when they come to visit. See photos of the original hangers in our article.

DIY hanger master class

When we talked about a tree, we did not mean a plank, we were talking about a real tree with branches. To do this, it is better to use oak varieties of trees. If there are knots, then this is even better, since you do not have to arrange hooks.

The first step is to choose a suitable tree, and then split it in half, so that the flat side can then be processed with a planer. Branches in diameter should not exceed 3-4 cm, otherwise the design will turn out to be too cumbersome.

Further, the surface of the entire tree must be treated with special agents against fungus and mold, and varnished. After that, you can proceed with the installation of the hanger to the wall, which will require self-tapping screws.

First, it is better to drill a hole, and then screw it with larger diameter screws. Such a hanger will undoubtedly become the property of the entire apartment, your guests will be impressed and want the same one for themselves.

Conclusion

If you want the atmosphere of your home to be filled with new colors, then try to make a custom hanger and place it in the hallway. Undoubtedly, this result will be evaluated in all respects.

Note!

DIY photo hangers

Note!

Note!

In the hallway, you can not do without a hanger. Certainly, outerwear you can hang it right away in the closet, but it takes longer and is not so practical. The wall hanger is very convenient for narrow and small hallways, it is quite roomy and does not take up much space.

We offer you 5 workshops on making wall hangers with your own hands from improvised means: wood, leather, branches or pipes, as well as inspiring photo ideas.

This hanger in every sense will display the phrase “I also know how to embroider with a cross”, show your creativity and become good decoration Houses.

materials

In order to create it, you will need the following materials:

• perforated plastic or metal panel,
• multi-colored floss threads (in principle, threads for knitting are also suitable),
• scissors,
• hooks (in this case 4 pieces with a ball at the end).

ADVICE: Where can I get such a perforated sheet? At any hardware store or furniture store - ask for perforated sheet. And you will be cut to the right size.

Work order:

1. We buy perforated sheet of the right size.
2. Do the usual cross-stitch embroidery with threads, only a larger canvas.
3. You can choose any word you like, or a simple picture (a heart, for example), the main thing is to calculate that everything fits and the spaces between the letters are the same.
4. When the inscription is ready, attach the hooks through the holes in the panel and hang the hanger on the wall (you don’t even need to drill holes for the fasteners, they are already there).

Wooden hanger

If you have a pallet lying around in your country house, then this master class will help you find useful application. If there is none, then the hanger can be made from an ordinary wooden board.

Necessary materials:

• Pallet or wooden board
• Hooks
• Paint and paint container
• Brush or roller
• Protective gloves
• Drill
• jigsaw
• Sander or sandpaper
• measuring tape
• Pencil
• Wood cleaning cloth

Step-by-step instruction:

Step 1: Wood preparation

1. Separate one board from the pallet (or take a regular wooden board), clean it of dirt. Trim to size if too large.
2. Using a grinder, make the surface even and smooth, if there is no machine, you can use sandpaper by hand, it will take more time, but the desired result can be achieved.

Step 2: Mark where the hooks will be

Using a measuring tape, mark the points where you will attach the hooks. They can be arranged in one line at regular intervals, or above or below one, as you like.

Step 3: Drill Hook Holes

• Make holes for the hooks with a drill (pre-check that the width matches the desired size).
• After completion, clean the board from dust.

Step 4: Paint the boards

• Choose the color and type of paint, depending on your preferences and interior. Here I used water-based acrylic paint in bright blue.
• The paint can be applied with a roller or brush, along and across the board, evenly filling the entire space, the last ball should go along.

If desired, before painting, you can use a wood preservative to ensure its long shelf life.

Step 5: Insert Mounts

1. On the back side of the board, insert the fasteners for which you will hang the board from the wall. They should be located symmetrically to each other, relative to the middle of the board.
2. Hooks were used here, which are screwed into previously drilled holes. They are easy to attach, the main thing is that there is an appropriate diameter.

Create your own design - choose a color, paint patterns, choose the location of the hooks, as well as their color and size. All is ready!

From a copper pipe

This hanger is especially suitable for hat lovers. It is difficult for them to find a place where they would be stored and not wrinkled, in the closet it takes up too much space. This is also a great option for use with a direct purpose - for clothing, and for decorating a room. Of course, in addition to hats, a clothes hanger will also fit here.

Necessary materials:

• copper pipe
• Scissors
• Clothespins
• Rope

Step-by-step instruction:

Step 1: Prepare the base

Cut the rope just long enough to hang the hanger. Pass the rope through the copper pipe.

Step 2: Attach Hat Hanging Ropes

Cut a few more pieces of rope and tie them to the pipe, leaving enough space between them so that the hats do not interfere with each other later.

Step 3: Hang up the hanger

Attach the ends of the rope with copper pipe to the wall or ceiling (for this there must be hooks or a pipe). Attach clothespins to the ropes hanging from the pipe, now you can hang hats on them. You can also hang a clothes hanger on the pipe.

ADVICE: Choose the length of the pipe, depending on the amount of free space on the wall, hats and clothes.

As you can see, it is done very quickly, even in half an hour you can do it, but it looks very original.

Hanger made of leather belts

Such a wall hanger is suitable for the hallway, and the kitchen, and the bathroom. The type is similar to the hanger described in the previous master class, but its application is more universal. It will beautifully complement the interior of your apartment, while requiring very little effort and time to manufacture.

Necessary materials:

• Leather belts (2 pieces of fairly soft leather)
• Two small pieces of leather (tougher)
• Wooden stick (from a tree branch)
• S-hooks
• Scissors
• Thread and needle (suitable for leather)
• Leather punch

Step-by-step instruction:

Step 1: Preparing Belts

1. Cut two leather belts to the desired length, they should be the same. Wrap the strap around the stick and mark how much you need for its girth.
2. In the place where the strap converges after the girth, it needs to be sewn together to fix the stick so that it does not fall out. Do the same with the second belt.
3. So that the seam is not visible, make decorative leather straps: wrap a narrow strap around the strap attached to the stick at the seam, and sew it, connecting the ends (the same with the second strap).

Step 2: Attach the hanger

With a leather punch, make holes on top of the belts (in the center of the width), for which you can hang this design on a wall or ceiling (on previously attached hooks).

Step 3: Hanging the Hooks

Hang the desired number of S-hooks on a wooden stick and the hanger is ready to use.

From branches and cuts

Branches and cuts are excellent material for a wall hanger. First of all, it's very affordable! And secondly, the tree will never go out of fashion and will perfectly complement the style of any apartment!

From the branches you can make a lot of crafts for the home - about this in the article .

From a pallet

If you are going to make a wall hanger and choose a cheap and fast option, then a hanger from wooden planks or pallets - this is exactly what you need. If you think that it will look ordinary and unoriginal, look at the selection of photos below and make sure that you can create a truly unique thing from these materials that will decorate the interior of the apartment.

Choose the paint (or just pre-treat the wood while keeping the natural color), hooks, shape the plank, come up with your own way to decorate the planks.

More complex hangers can also be made from wood. More precisely, it’s not even a matter of complexity, they are laborious, you need to devote more time to them.

Manufacturing technology of hangers from improvised means

Summing up all the master classes, I would like to derive a single formula for manufacturing and creativity over hangers. Conditionally can be divided:

• The basis- can be any item from a finished board to old items.
• Hanger hooks- it is not necessary to buy, you can remove them from the clothes hanger.

The basis of improvised means

Also, for manufacturing, you can use things that at first glance are completely unsuitable for this: skis, oars, rulers, etc. How much fantasy is enough. A wonderful way to find a use for things lying around in the pantry.

Hanger hooks

Hooks also do not have to be standard (although their range of choice is quite wide). Start looking at things with the thought “where else can you be applied?”. I'm sure that with a little training myself, interesting ideas will begin to come more and more often, and this applies not only to hangers, of course.

Attach separate hooks to the wall, their design should look like a decorative element, even if there are no things on them.

Wall hanger ideas

More and more designers are coming up with ideas for creative and functional clothes hangers. Sometimes, their designs are quite elementary and not difficult for home implementation.

Metal, of course, is more difficult to work with, but if you want to create such a hanger, it will not be difficult. Make branches in the shape of a tree or hang hangers on a pipe - it will turn out solid and functional.

All these photos are a piece of what you can create with your own hands. Take the elements you like, combine, and most importantly - enjoy it all!

As you know, not only the theater begins with a hanger, but also visits to other less pretentious institutions. Of course, every hostess wants her house to be remembered by the guests not just for plentiful treats, but for unique furniture.

Not just a decorative element

Making a piece of furniture both beautiful and multifunctional is not easy. But with regard to the clothes hanger, these two points are fundamental, because the limited number square meters in the hallway obliges to save not only free, but also "working" space.

For small rooms should be considered only floor options hangers. Why?

Firstly, the things that should be in the hallway belong to the demi-season period or to the cold season. Jackets, fur coats, down jackets weigh a lot, which is why ordinary coat hangers rarely support their weight. And when not only coats of parents, but also jackets of children, raincoats of guests, umbrellas of grandmothers are hung on one coat hanger, even the most persistent “fighters” cannot withstand this load. The “correct” floor hanger allows you to place all the necessary things, and can also easily withstand their weight!

Secondly, winter and demi-season coats often differ dramatically in weight. It is impossible, as you know, to release fighters of different weight categories into the ring. The same case: if a September cloak hangs on one scale, and a fox coat is piled on the other, the mechanism will crack. From the beautiful fur of the fur coat, you will have to wash the stains from the smudges of dirt, and the unstable hanger will need to be taken in for repair.

Thirdly, things need space and air - without it they wither. The absence of the necessary distance between several warm things generates bad smell, infections. That is why it is important to leave some space between the fur of a fur coat and, for example, a sheepskin coat. Floor with a strong bar allow you to correctly place almost all warm clothes by category without the risk of mold, unpleasant plaque or suffocating smell.

Here she is, my one and only...

Unfortunately, often ready-made options for floor hangers are designed for large-sized apartments or private houses, and the inhabitants of modest "odnushki" or "dvushki" are allowed to be content only with fragile wall-mounted mechanisms: compact, but absolutely impractical.

In this case, you can develop a design yourself or entrust such a task professional designer. He will take into account your wishes, the number of free meters in the hallway, the color scheme and the number of warm clothes.

What options to choose from?

corner

The high ceilings of the hallway (in this part of the apartment the ceiling can reach a height of 3-3.5 meters) allow you to make a closet that reaches the very ceiling. This allows, in addition to the hanger itself, to fill the space inside the cabinet with various useful insides:

• shelves open / closed;
• retractable drawers / just drawers;
• boxes/hooks.

Your hanger transforms from an ordinary bar into a multifunctional closet where you can hide everything from shoes and umbrellas to a butterfly net or fishing rods.

Mirror corner

One of the varieties of corner, the appearance of which brings it as close as possible to the closet (including the issue of multifunctionality). It makes sense to mount a large number of mirrors in a closet only if the lighting in your hallway is set correctly. If desired, it can be supplemented with wall lamps or mini-floor lamps, but it must be borne in mind that such a light source is still not enough if you want, for example, to apply makeup or try on a new skirt.

If you still decide to install a mirror, then you need to choose the most convenient option for you: external or internal. The external mirror will have to be washed more often, but there will be no problems with the light (if other lamps are present). The interior will be in constant twilight, but the surface will always remain clean. The choice is yours.

Hanger-hooks

The design of the hanger-hook, known to us from the old Soviet times, has now been significantly improved. We are all used to the fact that hooks are usually located on the crossbar, which is attached directly to the wall. This makes the structure entirely dependent on the strength of the wall and the strength of the material from which it is made. Typically, hangers of this design are left for the bathroom or pantry: these rooms do not require much physical effort from the furniture.

Meanwhile, correct design floor hanger, which has a small amount of hook, allows you to increase functionality, will solve some of the problems associated with the low growth of the inhabitants of the apartment. Floor-standing usually imply the presence of an upper shelf, on which they put:

• hats;
• scarves;
• gloves;
• umbrellas and other necessary trifles.

This is not always the right decision for families with children or for adults whose height is less than 170 cm: if, for example, a person who cannot reach the cherished line comes to visit you, this can put you in an awkward position.

The decision to put things on the lower shelves also causes some difficulties, since many apartments have pets: your beret may not be good.

Hanger-panel - for a classic style

In this case, the only right decision will become either a closed wardrobe, or special hooks for small things. Of course, the whole hanger cannot consist of such hooks. But they will be a great addition to those elements that are already in your design.

In fact, the closet

The sliding wardrobe is now one of the most common, most expensive and, unfortunately, the most impractical options. What is the snag here?

• The standard wardrobe takes up too much space. This great option for a bedroom or hall, but there is too much left in the hallway free space. Most wardrobes are designed according to the same principle: two doors + several shelves + several pencil cases + several hooks. Any additions are considered redundant as this model has gone through fire and water.

• The assembly of wardrobes makes them very fragile for such a conflict zone as the hallway. Agree, anything can happen in this small area of ​​​​space: a soccer ball will break the outer glass of the cabinet, a cat will jump into the lower pencil case, and the door will slam shut, a neighbor who has come in for salt will accidentally touch the door with his shoulder, and it will jump out of the rut. Movable structures are always not the best solution for rooms in which there is active movement.

Open hanger bench

This is one of the most conservative and most acceptable solutions for small apartments. The hanger shop, as a rule, consists of the following modules:

• several upper canisters (options with open shelves or mezzanine models are possible);
• several lower cases for shoes (open shelves or retractable boxes-shelves are also possible);
• base with attached various models hooks and a crossbar (sometimes a mirror is added);
• shop.

These are rarely made of metal or plastic. The design of this somewhat old-fashioned, but very practical unit is carried out exclusively by people who know a lot about organizing space. Products, as a rule, are made of wood, hooks, base and crossbars in this case must be metal or also wooden.

In addition to strength, it is good for apartments where elderly or disabled people live. The stool next to the closet takes up an unacceptably large amount of space. The hanger bench is more compact. The option that, between us, you can think of ...

Crossbar hanger

“Minimalism is our everything” - this phrase has become almost the motto of postmodern interior design. A small apartment with small rooms and small furniture needs a small hanger.

On the hanger-beam can fit everything that a couple needs, which is assigned a cozy "odnushka":

• several warm coats;
• several down jackets;
• demi-season raincoats;
• sport jacket;
• vest;
• handkerchief;
• several hats.

On the stand below will fit several (6-8) pairs of shoes (for one season). True, shoes will have to be removed from time to time (alternating summer and winter seasons), but the same problem appears in the case of a closet.

Remember the simple truth: the more space there is for things, the more things try to fill that space.

Advice

When buying a crossbar, pay attention to the material from which the crossbar is made, the holders and the fasteners themselves. The rod must support the weight of coats and jackets, and also all the coat hangers that you will cling to this crossbar.

At the bottom there can be an additional shelf for shoes, made of a material that will not be too easily soiled (pay attention to the color).

Chose a type but still confused about the material it will be made from? Both the appearance and its strength depend on the material.

What to choose from?

Plastic, wood, metal: which is more practical?

Plastic

Hangers made of plastic are the most impractical of all that offers us furniture market. Weak strength, inability to attach heavy and strong fasteners, brittleness. Things made of plastic are now less and less common in rooms where a child can be.

Plastic furniture offers an abyss of design solutions:

• color mixing;
• the ability to melt and create original shapes;
• matte and gloss.

This is especially true for manufacturers of wardrobes: than prettier furniture the sooner the owner can be found. Meanwhile, after a few months, the same owner is forced to get a warranty card out of the box, since a plastic cabinet or shelf will show its real face after a few weeks of operation: a screw will fly off, a glossy surface will be scratched, or even worse: the door will fall off ...

Sad prospect, isn't it?

Metal

Good strength, but not too high a degree of practicality - it's all about metal cabinets. Metal structures can withstand a giant's outerwear, a dozen of the heaviest sheepskin coats, and many pairs of boots ... However, an obsessive shine and too sharp a reaction to temperature changes may not be very pleasant as flooring and wall cladding.

Often, due to a too sharp temperature drop (condensate has formed on the hanger), excess moisture begins to decompose the wall space near the hanger: wallpaper peels off, plaster “flows”, unpleasant tracks appear on the paint. Sometimes parquet or linoleum can be deformed. Moreover, the deformation is caused not so much by condensate as by the large weight of the hanger: metal constructions weigh up to several tens of kilograms.

The external strength is very attractive for a floor hanger. But is this feature worth redecorating the hallway?

Tree

Last, but not least, material.

1 First, quality. Wood furniture (made from real wood, not recycled sawdust) is known for its durability.

2 Secondly, good communication with external environment. The tree does not give in to internal deformation, and yet does not spoil the floor, walls, ceiling. "Sweating", "condensate" are words that are not known to wooden furniture. When you buy a hanger made from durable wood, be aware that it won't ruin the color of your walls, warp your parquet, or stain your ceiling.

3 Third, wood is a “healthy” material. The trend towards improving the environment is most fully manifested in the furniture industry: interior items are made from environmentally friendly materials. This is not the cheapest option. But, on the other hand, what can be safer for your health and the health of your child than wooden furniture. Natural material promises the absence of an unpleasant odor - an important criterion for closed-type hangers. Winter things that should be stored in this makeshift pantry through the long months of spring, autumn and summer (even if they are packed in covers) absorb unpleasant odors that produce furniture. For organic wood, this problem does not exist: you can forget about naphthalene. Clothing will retain its presentation and "commodity smell".

4 Fourthly, wooden hangers look very advantageous, for example, with key holders or wooden umbrella baskets. It is very difficult to find suitable color scheme and the design of small things for furniture made of plastic or, moreover, metal. They have to be bought either as a set, or made individual elements to order after you have decided on the main accent (in the case of a small hallway, this accent will almost always be a hanger). Wood, on the other hand, goes well not only with other wooden products, but also with furniture made of plastic and metal.

The first impression of the owner of the apartment begins with the hallway. It is not always possible to place overall furniture here. A wall hanger is sufficient. The ease of use and durability depend on its design and the material from which it is made.

Depending on the number of family members, the wall hanger in the hallway can be large or small, on one or two walls. A double hanger on two walls is called a corner hanger. The disadvantage of such a hanger is one: in order to install it, you need to drill the walls and install dowels. To do this, you need a puncher or you need to invite a specialist.

What are wall hangers

Let's decide right away, wall hangers are those that are hung on the wall. They are made from various materials:

• wood;
• chipboard, MDF boards;
• metal;
• combined.

There are many styles of furniture in the interior. Since the majority of the population does not live in the royal chambers, styles are most suitable for the mass consumer:

• functionalism,
• minimalism,
• country,
• high tech,
• ethnicity.

If the hallway is a small wall hanger solves many problems. Additionally, hangers are completed with cabinets, mirrors, shelves. Depending on room height structural elements placed horizontally or vertically.

In small hallways, you can choose a design that occupies a minimum of space. Structurally, they are assembled or collapsible. Prefabricated structures are assembled at the enterprise and sold ready-made. The prefabricated ones include solid wood and metal. Collapsible houses must be assembled from purchased parts.

Advice: Choose a hanger for the design of an apartment or hallway

Solid wood hangers

For wooden hangers in the hallway, various types of wood are used: oak, beech, ash, birch, spruce, pine. Hooks are wooden or metal. Modern stains for wood allow you to give the wood any shades.

Design options come with a shelf for storing hats or without it. Large hangers can be equipped with mirrors, shelves, drawers for storing small items, shoes.

Wooden products are always expensive. Moreover, it should be noted that soft wood of pine or spruce can cost more than oak or beech. It's not about the price source material, but with the difficulties of technological surface treatment. Soft spruce wood is poorly processed, after grinding there are risks from the abrasive. The array is varnished, waxed or simply painted. The advantages of solid wood products are their environmental friendliness and long service life.

Hangers made of chipboard, chipboard, MDF boards

Chipboards and MDF boards in furniture production occupy a strong position. They are inexpensive, covered with laminated films under valuable wood species, they do not warp, they keep their geometric dimensions for the entire period of operation.

MDF is a finely dispersed fraction of a fibreboard. They are perfectly milled, covered with paints, varnishes, films under precious woods. In terms of consumer qualities, MDF is superior to chipboard, but they are more expensive.

Chipboard, chipboard and MDF boards are sold ready-to-work for home craftsmen. It is only necessary after cutting to seal the ends with a laminate or special plastic overlays.

metal

The design of wrought iron wall hangers gives the hallway a novelty and originality. Structurally, it can be different options: with or without a shelf for hats, with a decorative net separating clothes from the wall, with various decorative hooks.

However, to complete the picture for a metal hanger, additional products made by forging are needed: a shoe rack, a mirror, a key holder and others.

Combined

For combined hangers apply all known materials. There are no restrictions here. Appearance depends on the imagination of the designer. The choice of materials for the manufacture of wall hangers is huge.

Notice the hooks. Preference should be given to metal. In winter, heavy clothes will be hung on hooks: coats, sheepskin coats, jackets. The further operation of the furniture will depend on their strength.

Color selection

Since there are no windows in the hallway, the choice color solution furniture plays a huge role. Keep in mind that White color expands the space, and the dark colors of the furniture narrow. Choose light-colored wall hangers. If the hallway is connected to other rooms, then in this case the style of the hallway should be in harmony with the common room.

How to choose a wall hanger

You need to choose based on:

• the number of family members;
• design;
• financial opportunities;
• prefabricated or non-separable design.

Before buying, decide on additional accessories:

• shoe sections;
• shelves;
• hanging or floor boxes;
• shoe rack;
• mirrors.

The leaders in the production of this type of furniture are Ikea and Leroy.

Ikea, in addition to wall-mounted hangers, offers hundreds of options for clothes hooks in various materials, ranging from plastic to metal hooks anodized in gold or silver.

The firm Leroy Merlin does not lag behind its competitor. The main thing is not to get confused among hundreds of options for clothes hooks. Both firms use modern materials MDF, chipboard, metal, plastic, glass.

How to make your own wall hanger

In order not to waste time in vain and not overestimate our strengths, let's say right away what can be done independently, inexpensively and with a minimum of tools, and what not. It is impossible to make a hanger from solid wood without a specialized tool and work skills. Buy circular saw, router, grinder and other tools does not make sense. For this money you can buy several products.

It is really possible to make a wall hanger from forged elements plus chipboard or MDF panels. You can also use laminated chipboard.

Procedure

1. Pick up a photo from the Internet and make your design. Make a sketch of the future hanger with all sizes.
2. Provide vertical or horizontal slats to separate clothes from the wall so they don't rub off.
3. Choose the required invoice Chipboard laminated films and order cutting to your size in a construction hypermarket.
4. Sand and seal the ends with a special film on PVA glue.
5. If there are connections on screws or furniture ties, pick up special plastic plugs to hide them.
6. Choose hooks with more screws than just two. Consider chipboard is shavings and sawdust. Before screwing in the screws, drill a hole with a diameter of 1 mm and drop a few drops of PVA glue into it.
7. The same goes for wall mounts. Make sure that the screws do not come out on the front side.
8. Drill holes in the wall with a puncher for plastic dowels and drive them into the wall.
9. Install the hooks or loops on which the wall hanger will be mounted.
10. Put the hanger back in place.