Sawing and cutting chipboard and chipboard. Sawing and cutting chipboard Order laminated chipboard according to customer sizes

We carry out:

• Cutting laminated chipboard
• MDF cutting
• Cutting plywood
• Cutting fiberboard panels
• HDF cutting
• Cutting panels trimmed with plastic
• Cutting veneer panels
• Cutting plastic
• Cutting plexiglass
• Cutting facade panels
• Cutting countertops
• Cutting postforming panels
• Production of multi-saw parts from chipboard and MDF.

  All of the above materials are guaranteed to be sawed without chipping or tearing. When cutting, an automatic cutting center Holzma (Germany) and a format-cutting machine Feeder Capa 450 (Austria) are used. When ordering, a cutting map is drawn up for the best distribution of parts on the sheet, in order to obtain a minimum percentage of attacks. To speed up the cutting process, there is the possibility of batch cutting. We cut parts from both our own material and the customer’s material. We always have 12 colors of high quality laminated chipboard in stock: White Vanilla Gray Metallic Black Wenge Walnut Eco Alder Plank Cherry Portofino Cherry Beech Oak Bleached Po individual orders We produce multi-saw parts, panels with a groove.

  • Order production time is 5-7 working days.
  • Urgent orders are processed within 3-4 business days.

  * We provide free storage of completed orders for no more than 3 calendar days. If the order is not picked up on time, storage is paid separately at the rate of 1 pallet - 100 rubles per day.
  **Ready orders are stored on a Euro pallet. When loading an order together with a Euro pallet, the customer gives a deposit of the value of the pallet at the rate of 250 rubles.
  ***Packaging of the order is paid separately, according to the prices given in the table. The order is loaded into the back of the customer's vehicle using a forklift.

  
  Cutting laminated chipboard in Moscow– this is one of the main directions of our company. In addition, at the RASPILPODOLSK company you can order cutting of MDF, plywood, fiberboard panels, HDF, plastic, plexiglass, countertops, postforming panels.

  Advantages of ordering laminated chipboard cutting at the RASPILPODOLSK company

  High-quality cutting of laminated chipboard. We use the German cutting center Holzma and the Austrian cutting machine Feeder Capa 450. High-quality equipment, which has long proven itself in the market, allows us to guarantee that the cutting will be carried out without chips and cracks, with the highest possible accuracy (0.3 mm). The panels are loaded automatically, which eliminates the human factor and, therefore, reduces the likelihood of defects to zero;

  Sale of laminated chipboards with cutting in Moscow. We offer cutting of customer's materials and our own. We always have 12 colors of laminated chipboard from the SWISS KRONO company in stock. We work with this manufacturer because we have seen from experience what exactly he offers best material. To make laminated chipboards, he uses only the best raw materials, which are absolutely safe for humans. When cutting laminated chipboard from SWISS KRONO, no difficulties arise, the edges are smooth and neat;

  Cutting laminated chipboard into complex shapes. The Feeder Capa 450 cutting machine makes it possible to cut from laminated chipboard not only standard square and rectangular shapes, but also triangles, hexagons, trapezoids, etc.;

  Urgent cutting of chipboard. The machines allow for batch cutting, which significantly speeds up work. If you need urgent cutting of chipboard in Moscow, contact us! The standard order fulfillment time is 5-7 working days, and urgent – ​​3-4 days;

  Rational material consumption. Before cutting, a cutting map is drawn up, where the placement of parts on the sheet is optimized, thanks to this the amount of waste is reduced to a minimum, or there is no waste left at all;

  Cutting laminated chipboard at a low price, which allows you to reduce your costs for preparing material for further processing. Saving on this service allows furniture manufacturers to reduce their costs and increase profits.

  Cutting laminated chipboard according to customer dimensions (Moscow and Moscow region)

  Cutting laminated chipboard is an important stage in furniture production. This process cannot be called simple; its use requires high-quality equipment; manual cutting will lead to cracks and chips.

  Are you looking for where to cut laminated chipboard to your own dimensions? Contact our company "RASPILPODOLSK".

  Also in our company you can buy laminated chipboard with cutting in Moscow. Ready-made high-quality elements are perfect for making furniture. With smooth parts without chips, the furniture will be of higher quality and with high aesthetic properties.

  We have our own production and engage in wholesale sales, so our important advantage is price. Cutting laminated chipboards is cheap, but at the same time high quality - this is what we offer our clients. If you are looking for a company that will cut laminated chipboard according to the customer’s dimensions (Moscow) or sell high-quality ready-made elements from laminated chipboard, then contact “RASPILPODOLSK”!

We have been producing and manufacturing cabinet furniture for many years, and over the years of cooperation with various clients we have gained excellent experience. Contacting us is a guarantee of high-quality work in the shortest possible time!

Edging laminated chipboard

We carry out edging of parts made of chipboard and laminated chipboard with both a thin PVC edge - 0.4 mm and a PVC edge of 2 mm.

Cost of edging:

• PVC edges 0.4 mm thick - 40 RUR / p.m.
• PVC edges 2 mm thick - 80 RUR / p.m.

We carry out edging of radius and curved parts. Check availability and cost with company managers. You have the opportunity to send a request by mail on the website and our manager will contact you as soon as possible.

Edging is an important step in the furniture making process. It involves applying a furniture edge to the end of chipboard/laminated chipboard parts. It allows you to protect the part from various mechanical damage, increasing the life of the furniture. In addition, furniture with an edge looks neater and fits better into the interior. A high-quality glued edge also ensures moisture resistance of the part, but this requires that it be applied by professionals using special equipment.

To get detailed advice on these and our other services, just call or write and our consultants will answer any question

We cut laminated chipboards into parts according to customer dimensions. There is a large selection of decors for laminated chipboard EGGER and Kronospan.

Attention!
The Egger company announced the launch of a large part of laminated chipboard decors in 2020! Order any decors now, don’t put it off until tomorrow!

Price of Egger chipboard parts with cut to size

Price of Kronospan laminated chipboard parts with cut to size

Radius cut

Nesting is not only radius cutting of curved parts into milling machine CNC, but also the production of parts from laminated chipboard and MDF with holes for assembly at a time, i.e. without moving from machine to machine.

The main advantages of manufacturing curved parts and parts with additives using NESTING technology:

1. The possibility of saving laminated chipboard sheets due to a denser arrangement of curved parts on the laminated chipboard sheet
2. High productivity – cutting speed up to 20 meters per minute.
3. Fundamentally higher manufacturing accuracy compared to traditional technologies.
4. Possibility of producing internal cutouts with high quality.
5. Finish cutting on both the front and back sides of the part, which improves the quality of edge application.
6. Ability to work with vector files created in the programs Basis Furniture Maker, Corel Draw and their analogues.

The above advantages allow you to save on both material and the cost of work on curved cutting and additives, which is fully noticeable on large orders.

The cost of cutting services on a CNC milling machine for laminated chipboard and MDF with a thickness of 8-19 mm is 30 rubles per 1 m.p.

Radial cutting of chipboard parts

Chipboard edge processing

Applying 0.45 mm PVC edges to laminated chipboard parts

Applying 2 mm PVC edges to laminated chipboard parts

Hardboard (fibreboard)

Sawing hardboard and holes for fiberboard

MDF

Cutting MDF Kronostar to size

Furniture additive

Drilling holes in chipboard for fittings

Hole for furniture hinges, Ø35 mm	55 rub. / PC.
Hole for shelf holders, Ø5 mm	25 rub. / PC.
Through hole for confirmat, Ø8 mm	25 rub. / PC.
End hole for confirmation, Ø5 mm	25 rub. / PC.
You can receive details faster by registering and paying urgent cutting. The DSP Komplekt company reserves the right to refuse to provide services without giving reasons. Payment for services You can pay for cutting services: cash in the office or production (see Contacts); by bank transfer based on the account: via Internet Bank or mobile application; in any branch of Sberbank of Russia or another bank; through the terminals of the Moscow Credit Bank.

An important procedure is cutting laminated chipboard, during which work is carried out with two materials - chipboard and laminated coating. You should choose tools that are suitable for them and will not leave any chips or cracks. The procedure is quite labor-intensive, being much simpler with other materials - chipboard, MDF and others. That is why it is undesirable to perform it at home - unexpected costs for the purchase of new materials may follow.

Prices for cutting laminated chipboard

Milling

150 rub./p.m.

Rounding one corner to 90 degrees. radius from 50 to 300mm (External)

150 RUR/pcs.

Rounding one corner to 90 degrees. radius from 300 to 600mm (External)

300 rub./pcs.

Rounding one corner to 90 degrees. Radius from 50 to 300 mm (Internal)

300 rub./pcs.

Rounding one corner to 90 degrees. Radius from 300 to 600 mm (Internal)

400 RUR/pcs.

PVC 0.4 mm material thickness 16mm/18mm/more than 18 mm per p/m

45/50/55r.

PVC 2 mm material thickness 16 mm/18mm/more than 18 mm per p/m

60/65/70r.

20 rub./pcs.

PVC 0.4 mm on chipboard with a thickness of 16 mm/more than 16 mm per linear meter.

55/65 rub.

PVC 2mm on chipboard with a thickness of 16 mm/more than 16 mm per linear meter.

75/100 rub.

Manual edging

100 rub./p.m.

Straight groove width 4 mm / 8 mm per r.m.

Quarter sampling 4 / 8 / 12mm, etc. (40 rubles per pass) per p.m.

40/80/120r.

Diameter up to 10 mm (shelf holders, eccentric rod, confirmat, dowel)

10 rubles/pcs.

Diameter from 16 mm to 36 mm (for hinges)

35 RUR/pcs.

Packing parts in cardboard

50 RUR/m2

Packing parts in stretch film

Assembling a wardrobe door from chipboard

1000 rub.

Assembling a wardrobe door with a mirror

1200 rub.

Assembling a wardrobe door from chipboard and mirror

1500 rub.

Gluing/twisting two parts

300 rub./m2

Calculation of the product with detailing, additives, fittings

800 rub./p.m.

Straight cut

150 rub./p.m.

Eurozapil

2000 rub./l.m.

Bevels (edging included in price)

1000 rub./l.m.

Edging

500 rub./p.m.

We offer to your attention an application form for cutting (37.00kb)

Cutting laminated chipboard according to customer sizes wholesale and retail

Work at home consists of two stages: first the laminate is cut, and then all the material. Due to the availability of special equipment, they are performed in one stage, which significantly saves time and effort.

You can order our services on the website or by phone. We will cut laminated chipboard quickly, providing you with carefully processed materials that will be used in the production of durable and beautiful-looking furniture.

If necessary, we will quickly answer all your questions regarding the services and all aspects of their provision. Contact information is presented to your attention on the website.

Advantages of cutting laminated chipboard at KSPROF

There are many specialized companies in Moscow that provide services for processing materials used in furniture production. One of these is the KSPROF company, where you can order cutting of laminated chipboards. In this case, we have significant advantages, including:

• significant experience;
• adequate pricing policy;
• performing work with high quality results;
• experienced, responsible and careful specialists;
• prompt execution of processes;
• taking into account all features and aspects of services;
• convenient ways payment.

Work examples