GSM temperature sensors. GSM thermometers and alarm with thermo sensors. How remotely can be controlled by the temperature of the residential premises Remote temperature control

Until recently, remote control of heating at the cottage was available only for professionals who are able to independently assemble a controller scheme from individual radio components or for those who could pay such services. However, modern manufacturers have released many models of controllers for smart home systems that perform the control functions of various equipment, including heating. Another reason for which it is highly recommended to use factory control modules - this is fire safety.

Requirements for temperature control and heating control system

Most often, the following tasks are set in front of the heating control system:

First, maintaining the minimum temperature in the house for not freezing the heating system and the structure itself;
Secondly, the remote inclusion of heating at the cottage before the arrival of the hosts, to the time of arrival, the internal premises warmed up to a comfortable temperature.

To solve the tasks, the heating control system must comply with the following criteria:

Display information about the current indoor temperature and beyond the user request;
Send alarm messages if the temperature goes beyond the boundary values;
Remotely control the heating system, with the ability to adjust the temperature throughout the house or in its separate rooms using SMS messages or through special mobile applications;
Have an affordable cost high reliability and ease of control;
Possibility independent installation and settings.

The complexity of the development of universal recommendations is that in order to maintain temperature in the country, very diverse methods can be used. From the most common, it can be noted: central heating using a gas or electric boiler and radiators, heated by convectors distributed by premises and traditional furnaces or fireplaces.

As a rule, the receiving-control devices of the alarm system alarm system are used as control devices, which have advanced features and an additional interface to control various devices.

Management of heating boilers of central heat supply

For example, a GSM controller is alarm unit 4, the production of EMS LLC.

This device allows you to monitor the temperature in 8 zones at a distance of up to 100 from the main instrument. Although the device is also intended, first of all, for an alarm system, its last firmware has ample work with temperature indicators and the corresponding external periphery:

Range of perceived measurements -40 ° C ... + 120 ° C with accuracy to semi-repundance;
The protection against freezing coolant is built in, you just need to specify information from the detector and the boundary value. When it is exceeded, SMS is sent with a warning;
There is a Web interface with the possibility of statistics and visualization of temperature graphs for the period for each temperature sensor;
You can program the maintenance of the specified temperature mode and the freezing of the heating system.

This device has several advantages compared to other regulating the same functionality. First of all, all modules, including GSM modem and IPB (up to 12 hours of operation autonomously), built into the case, which greatly facilitates its installation and configuration. After the SIM card is installed, the controller is automatically connected and registered on the developer Web service, which is located at http://monitoring.gsmbps.com/. Using standard visualization shell tools, you can easily program the device to perform a plurality of functions without knowing a single programming language. Connection directly to the boiler is carried out through relay outputs.

In addition, the developers constantly improve both the hardware of the device and firmware and the software on the server. The only deterrent factor in the widespread use of controllers The checkpoint is their fairly high cost and poor compatibility with devices of other manufacturers.

Convector management - decentralized heating

The technical solution is advisable to implement via a modular system, since external controlled devices can be from several pieces to several tens. As an example, a basic GSM module is used to construct signaling and control systems VM8039D. The manufacturer positions this device for the protection and control of boiler room or electrical heaters of residential premises.

Configuring the device is carried out by the Special Configurator program supplied in the kit. The program interface is quite understandable - object-oriented and does not require specific knowledge in the field of programming. There is also a mobile control application for android smartphones, called "home logic" can be downloaded from GooglePlay.

VM8039D can measure the temperature in 32 zones, has a built-in thermostat subroutine and can support the established temperature mode in room. For use, additional equipment of the same manufacturer must be used as a convect management system:

VM8069D - expansion unit. The temperature sensors are connected directly to it, smoke detectors and relays through which the heating system is controlled;
VM8070 - relay for connecting powerful equipment (electrical convectors). It is not recommended to exceed the load of 2 kW per device;
PW1240UPS with the NT800 battery - ensures uninterrupted operation of the control system in case of disconnection of electricity.
Ma802 - motion detector for signaling system;
SN18B20 - the temperature detector in street performance - waterproof;
MP309 - module for measuring the values \u200b\u200bof the analog temperature sensors of the LM335 type;
LM335 - analog temperature sensors, range of measured values \u200b\u200b-40 ° C ... + 100 ° С, measurement accuracy up to 1 ° C (pretty effective devices At a budget price - up to 1 dollars.).
NM18V20 Thermaltectors, a set of two pieces.

ATTENTION! VM8069D module has one an important feature Operating, when it starts without an attached antenna, the device will be guaranteed to fail, with no additional adaptation of the device blocking the device during the missing antenna.

The use of universal controllers is justified, except the control of the heating system, they will also perform other functions: security and fire alarms, controlling the watering system in the country, remote lighting light to create an effect of presence, etc.

How to remotely measure the temperature in the country and manage heating with special devices

Manufacturers in a set release a variety of GSM devices, the main specialization of which remote control of heating devices. The user can choose among many different models:

GSM-Climate Zont-H1 is a thermostat for installing indoors with an integrated SIM card. The device is compatible with almost all models of gas boilers having an input for external control. Management can be carried out from a smartphone, a PC, a tablet with any operating system. On the manufacturer's website https://zont-online.ru/demo you can download free controls. Changing the main settings can be password protected. Up to 10 thermotteors can be attached to the device to determine the temperature in the rooms and outside the building. The device setup is quite simple, after installation in the SIM card slot from the phone, SMS is sent, subsequently this number receives administrator rights.
Sapsan Pro 5T - The device is a thermostat for 1 temperature detector to which you can attach one external electric device. The device independently supports the set temperature range. When you exit the installed boundaries, the user is sent to an SMS message. It is possible to configure through a computer. The control utility is supplied complete.
Signal XQ - The device Besides the GSM of the module and the temperature sensor has a built-in battery inside the case, providing an autonomous operation of the device of the Ann over 24 hours from the moment of turning off the electricity. Signal XQ refers an alarm SMS in case of de-energizing the house, which is equally important than maintaining the temperature, since most modern heating devices are energy-dependent. Through the device, you can also organize control of a gas or electric boiler having an external control module.
GSM Telemetric Thermometer is a device from a domestic company. It has extremely simple installation and use. It can control two electrical devices by supplying voltage to the corresponding relay outputs. Management is implemented through free applications on Android and iOS.

A budget option

There is a way of a very economical solution to the task. It consists in using GSM outlets. At the same time, control is carried out in manual mode through command SMS messages. Examples include such models:

To manage one GSM-socket T4 device from Telemetric. Remotely controls the boiler through the control of the power outlet. You can set the working temperature range, time frames (timetable for a week and timer up to 24 hours) or manage via SMS messages and mobile applications
To control multiple devices, it is recommended to use the B-DIN-BOX type models - GSM controller for 5 automata. This device implements control both each channel separately and general commands to all lines. It is also possible to set a password for each channel.

IMPORTANT! When choosing a specific GSM model, pay attention to the electrical safety: the quality of the housing, the reliability of contacts, the presence of ground, etc. Remember that we are talking about the devices of increased fire danger.

Remote control of temperature indoors (remotely) is part of a modern heating system and a security and fire alarm system installed in country house.

GSM Modules for Control and Temperature Control

Instruments tracking and regulating temperature regime ( gSM alarm), both in dachas and in office, warehouse, industrial premises (server, greenhouses, transformer, granaries, freezers, etc.) are integrated into the overall security system, controlling access control, video surveillance and remote alert.

Photo: GSM modules control / temperature control

Automatic control of air temperature in rooms is performed using stationary or wireless thermal sensors. Digital information enters the control panel. Depending on the ability to communicate for a remote object, data transmission is carried out through the Internet connection or via SMS on the phone.

Temperature Control Devices - GSM Alarm

The main task of the temperature alarm device installed in a country house is a remote multipoint control of the operation of the boiler and air temperature in residential premises. Calculation of quantity, installation and installation of electronic temperature sensors is performed after examining the heating system in the country. The presence of additional fire and security equipment is taken into account (motion sensors, fire detectors, gas and water leaks) connected to relay inputs of the alarm module.

Photo: Expansion blocks GSM

In case of insufficient power of the control panel, it is necessary to use equipment with a large number of control zones. The company Xsital GSM produces extension blocks that allow you to further get 8 control zones for connecting OPS systems, akud, CCTV, alerts about the operation of the temperature relays of boilers, voltage jumps, the state of hot water.

At the production of GSM systems, not only for energy-saving heating, but also to control the processes of ventilation and air conditioning, checking transformers and electric motors, temperature regime in a greenhouse, server, refrigeration chamber, grain storage, laboratory. Programs for GSM monitoring and controlling automation remotely are supplied by the manufacturer and easily installed on mobile devices.

GSM SMS Alarm - Remote Control Temperature

Technical means and equipment Wireless GSM SMS alarms allow you to organize a remote control, measurement and regulating temperature indoor large sizes. Sitting in a living room chair, through radio-controlled key chains, buttons and remote controls associated with alarm blocks and air temperature sensors, the host can carry out climate control anywhere in the house, adjust the temperature of the water in the pool and air in the sauna, turn on and off security systemOpen entrance castle etc. It does not violate the integrity of the interior, the original comfort and comfort remains in the heart of your home.

Cozy living room - heart home

For the sake of comfort, you can work in your home, choosing exactly those interior items that will make the atmosphere in any room unique and unique. Among such goods can be found unusual items that will complement the interior of any housing, as well as traditional things, like the goods for the family living room, cozy bedroom, and even for the kitchen. The main thing is to choose what you will like.

From how correctly you will pick up the furniture, not only the impression of the room, but also the convenience of using it. Its clearance should be treated with all accessible to you, because it is a real "face" of your dwelling. It is here that those who are not delayed at the entrance / hallway level, and it is she who creates the first impression of your home.

How many furniture do you need for the living room?

The first thing you should think about, drawing up living rooms in the house, is how much free space you agree to allocate under the furniture. If you are a supporter of minimalism, you can limit:

table
sofa
pair of chairs / chairs
one or two couches.

If you are going to use the living room not only as a place to receive guests, it would be appropriate to install several cabinets for clothing storage. This is a much more rational way to use space in the living room.

Decide with style

How would you like to see the most comfortable place in your home? If your dream is made in the style of high-tech, choose metal and glass furniture. If you are a supporter of the classics, you are suitable modular or cabinet furniture.

The cabinet option is found in many homes and apartments. Such furniture is popular because it allows you to carry out regular permutations by changing the interior. But at the same time the size of the cabinets remains unchanged.

Recently, modular furniture is increasingly attracted, with all its advantages. But before you go to acquire it, decide on the set of items that you consider necessary for the living room. The contents of cabinets for clothing is increasingly "moving" in the wardrobes, which are installed in the hallway, and sometimes even in the bedroom. You will probably need a rack or a cabinet for technology, as well as a large dining table. But in a small kitchen, he does not fit, so it is often installed in the living room. After all, this is the place of collecting the whole family! If you are especially limited in space, the folding option is suitable.

Quality and once again quality

In order for the furniture to serve you for a long time, bringing pleasure from its use, you need to choose high-quality products from good Materials. Here are three options here:

veneer - Isa natural tree Only top linings are performed.
Chipboard - lighter and inexpensive material
an array of wood is the most reliable, durable and eco-friendly type of materials.

Of course, when you purchase, you will have to navigate not only on the advantages and disadvantages of materials, but also on your budget. However, making one day a successful investment, you for many years provide your home with high-quality and reliable furniture.

Choosing furniture for the living room, think every detail of your future interior. After all, comfort and comfort is what should "meet" you in own home, no matter what.

The cost of mounting GSM module in a country house - from 20 rubles. for M.

Professional examination and installation

Experienced Hyric Specialists will help choose the optimal GSM module and thermal sensors to carry out efficient point control and temperature control in your country house, office, in stock - remotely. Qualified electrical installations of our company will connect the temperature control system with security and fire alarms, video surveillance, akud in industrial and residential premises.

Wanted automatic, electronic, digital, wireless, SMS systems of measurement and control of heating, ventilation, air conditioning, hot water with a notification by phone / over the Internet / at a distance? Owners of office and warehouses, server, laboratories, granaries, greenhouses, refrigerated camerasBoilers - buy and install a turnkey service, on special fellow!

Our online store offers everything necessary equipment and a gas boiler control monitoring program, GSM modules, temperature sensors and alarm expansion units, remote controls of temperature.

Today we will talk about the possibility of automating the control of heating boilers in a country house. After all, today there is no problem to ensure the remote dispatching of household systems, including heating, ensuring savings and high level of comfort.

Remote control goals

As often an average country house Suitable for heating boiler? If it is a gas or electric unit, then attention is paid to the minimum. Thanks modern devices Automation is possible autonomous work Boiler for quite and very long time. Only in severe frosts I want to set the light to feel even more feeling this pleasant contrast: outside the window snow and wind, and in the house warm and cozy. But after all, the remote dispatch exists, so what tasks does she decide?

It should be started with the fact that there are two modes of heating: economical and comfortable. If residents have no houses for 10-12 hours a day, why maintain optimal 23 ° С, if you can set the temperature sufficient to preserve indoor plants and domestic animals? And if the system works in saving mode during the lack of owners, how to provide a quick output to the nominal power so as not to return each time the half-fire house? Of course, you can use the timing control, but a rare person can boast a clear and homogeneous schedule. So, the first purpose of the remote control of heating is the operational change in the heating power.

Another aspect lies in the stability of the system. How reliable and high-quality boiler equipment, the probability of an accident is still not zero. Falling pressure, stopping circulation, gas leakage - potentially all these phenomena frighten quite strongly. If a boiler room remains unattended for a long time, the remote dispatching provides its second important function - control over the performance of the system and notification of the user's failures. Well, the third function is the ability to remotely troubleshoot or prevent the consequences of the accident.

Fuel type and operation modes

Electronics provides a huge range of solutions of a different level of complexity, including managed at large distances. However, there is a big difference in which type of heating system has to deal, it directly determines the completeness and cost of equipment.

The easiest to manage electric kitals: One or several heating elements can switch the simplest contact or solid relay. Additional switching can be used to control forced circulation devices. Neither gas leaks, no attenuation of a solid fuel combustion chamber cannot occur.

If the source of energy for heating is chosen gas, the boiler room belongs to objects of increased danger. The reverse thrust can put out the burner that defective automation will safely ignore. Remote control will allow you to turn off the gas supply or ignite the boiler again, and if it is not possible to drain the water from the system to avoid its freezing.

More difficult to manage heating systems on hard fuel. It requires control over the automatic fuel supply, it is extremely important to maintain a permanent circulation so that the coolant does not boil. But in this regard, the dispatching device copes with a bang: in the end, electromechanical devices are controlled by everything, and it is very easy to intervene in their work.

Electric boilers

Remote control of the electric boiler is included in the discharge of the most budget projects. Depending on the configuration and modes of the system, you can offer several options.

For heating without power adjustment, where the problem of freezing is not relevant, that is, for hydraulic systems on antifreeze, as well as air and convection. In such cases, all tasks are resolved primitively - a "smart" socket that can take GSM messages (houses, sokol). The issue price is on average from 300 to 1000 rubles, the difference in value is due to both differences in quality and switching load and the presence of additional functions. For example, a socket may have a built-in thermostat or timer, as well as an autonomous power supply. Some models have the ability to connect to mobile devices to easily configure operation modes. Most of the products provide user feedback, in particular such sockets are able to notify the correct execution of the command or the absence of electricity at the facility.

For multistage boilers and other heating devices with several active elements, several outlets can be used, but it is better to install one multichannel (Elgato, Polygator) - the so-called rebutter. These devices are available in a large spectrum of configurations - both conventional multipliers for plugs and for mounting on Din Rake. The principle of operation is the same: remote load management by sending SMS with the code of instructions or a call. Here you can already implement quite interesting work algorithms, such as the inclusion of an additional heating circuit with separate system Thermocontrolle. It will only be enough to make minor changes to the boiler electrical connections, connecting individual Tanes to different channels.

Gas boiler rooms

Unlike electrical, gas heating systems require not only receiving commands, but also qualitative feedback from remote control. Since direct control of high load is not required, then the solutions of the class described above are not fully applicable. The optimal output from the situation will be the use of a modular switch with 3-4 contact groups managed by one of the wired interfaces (RS-232, 1-Wire, etc.). Messaging can be transferred both by the GSM channel and by connection with the PC installed on the object. Usually, in order to enhanced reliability, the main and backup channels are organized.

Price range for gas boiler dispatch systems is incredibly wide. In the lower price segment, devices are located from budget "xitals" for 7-8 thousand rubles to more friendly to the unprepared Segnetics user for 15-20 thousand rubles. The middle link includes domestic Aries automation complexes, a set of devices can do 20-30 thousand rubles. The most complex systems worth more than 50-70 thousand rubles are used in modular boiler houses. common use: On the one hand, the dispatching notifies the service organization about the status of the system, on the other, users at their discretion are controlled by individual parts of the collector node. This kind of solution is not just a set of devices "from the box", in this category there are manufacturers of equipment of boiler houses of Ross and Viessman, providing a comprehensive project and conducting installation, configuration and maintenance of a system of qualified personnel.

In essence, such devices are ordinary signaling blocks that have from 6 to 20 control zones and capable of controlling 3-5 groups of dry contacts. There are two popular architectures of this kind of systems. "Ksital", for example, these are specialized boiler automation blocks, which are initially designed to connect typical temperature sensors, gas, smoke detectors and flames. In turn, Systems such as Segnetics and Aries are based on freely programmable controllers that can be complemented by communication devices and individual switching blocks. Their main feature is the ability to connect nonypical sensors and control actuating devices of a completely different type.

The main difference between the representatives of the last group in the presence of a user-friendly user interface: Segnetics is easily configured when connecting to PC or mobile devices, but Aries complexes require a more serious engineering approach, including writing their own firmware on high-level programming languages. What kind of choice to do for myself - depends on the complexity of the device of the boiler unit and the strapping of the boiler room. Thus, the simplest block "xital" will be enough to complete the operation of the parapet and smaller boilers of low-power (up to 40 kW), the Aries are used in boiler rooms with parallel connection of units, or in centralized systems air heating and air conditioning.

Heating control on hard fuel

Freely configurable management systems are optimally suitable for boilers on solid fuel, as well as installations associated with biogas generation devices. The reason for this is obvious: similar boilers are initially designed to work in the presence of an operator and, as a rule, have an individual mode of configuring modes of operation.

So, for the simplest solid fuel boiler, the influence of the tributary and thrust is required, control over the temperature of not only indoor air, but also the coolant at the inlet and outlet of the boiler. Additionally, it is necessary to carefully monitor the operation of the circulation system by the differential measurement of pressures at the input and output of the recirculation node. The inclusion in the complex of gas analyzers will also not be superfluous, additionally should take into account the temperature of combustion products. The secondary function of such dispatch systems can be called ensuring an economical fuel consumption and optimal modes of its combustion depending on the desired temperature and weather outside the window.

It is important to emphasize that the full direct control over each knot of the boiler room will be overcome for an ordinary user. Therefore, to control the heating on a solid fuel, complexes of two nodes are used: the reception of the commands represented by the GSM receiver or the Internet router, as well as a software and computing complex, which is configured once, and then ensures the correct interpretation of commands.

Additional complexity makes a variety of executive mechanisms. Servers, the performance of the smoke and blowing fans and circulation pumps is usually adjusted by the frequency converter or PWM, are used to manage valves and chibers. The complex system architecture obliges to order not separate automation modules, but a finished equipment complex. However, most suppliers of such systems provide this kind of service for a completely moderate price: typical projects about 30-40 thousand rubles, including the cost of equipment, but the automation of an atypical boiler room with automatic fuel supply can be caught by more than 50 thousand rubles with power up to 100 kW.

Special functions

As a result, we will analyze what functions of dispatch systems are strictly required, what is the logic of the action of such devices and which there are additional features. So, when you select automatics with remote control, you should give preference to those products in which the following functions are provided:

availability of a backup communication channel;
watchdog timer rebooting the system when hanging;
survey of individual control zones;
remote control of contact groups and sufficient quantity;
notification of the change of system status;
feedback, sending messages on acceptance and execution of commands.

Additional features of the dispatching module must be determined in accordance with the features of the heating system. So, for liquid heating systems, it is recommended to protect against leaks: humidity sensors and an electronic pressure gauge, capable of fixing a long pressure drop. For open heating systems, control over the level of fluid in the expansion tank is desirable.

Special attention should be paid to tracking the operation of forced circulation devices. If the boiler is not technically capable of turning off the heating when the critical temperature is reached, overheating evidence can only be the indications of the temperature sensor on the feed pipe that the control unit receives with a significant delay. In such cases, it is necessary to remotely stop the heating by stopping the supply of fuel or air, and if the risk of freezing the coolant is to drain it.

For remote control systems, preferably the presence of an automatic response to emergency sensor readings. For example, automation itself should adjust the circulation speed depending on the temperature of the coolant in the feed and return, only notifications of critical states should come to the user. In general, it can be said that the most important benefit from the use of the systems considered by us is the timeliness of the receipt of information about breakage, which allows not only to quickly take personal participation in the elimination of the accident, but also to replace the faulty components or call a specialist if necessary.

Device type	Management method	Functions	Price, rub
Smart sockets
TP-LINK HS100	Wi-Fi Internet	Remote switching on / off, timer	2188-2290
Smart GSM Socket SC1-GSM	GSM.	Timer, remote switching on / off	2390
Telemetric GSM-socket T4	GSM.	Remote switching on / off	5990
Simpal T4.	GSM.	Trigger on the sensor (thermometer)	3600
Controllers
Xsital GSM-T	GSM.	2 thermal sensors, 3 independent relays, up to 12 zones of control	8640-9090
GSM device Sokol GC-5	GSM.	5 load control channels up to 10a	3250
Ectocontrol	Wi-Fi / GSM	Ability to connect up to 67 sensors	from 9900.
Aries TRM132M	Wi-Fi / GSM	Temperature control in contour and indoors, a set of pre-installed modes, overheating protection, emergency diagnostics	14300

Fortunately, today everyone can remotely control the temperature in the country house. The company offers the most advanced and effective solutions for temperature control in winter months Using remote control.

What tasks should the remote temperature control system be performed?

As a rule, two tasks are placed in front of the heating control system:

1. Support for the required temperature in the house. At a minimum, it should ensure the non-freezing of the structure and heating system in it.
2. Remote inclusion of heating in the country or in a smart home. For example, before the host of the owners, to the time of arrival all the rooms warmed up to the desired temperature.

To solve the designated tasks, the temperature control system must comply with the following requests:

1. Provide information about the current temperature in the house and beyond.
2. Send alarm signals if the temperature goes beyond the permissible values.
3. Have remote control, in particular, the ability to adjust the temperature in separate rooms or in the whole smart home any in a convenient way (using a mobile application, via SMS messages, etc.).
4. The ability to independently configure and install.

Ways to control the temperature in the country in winter

There are two ways:

1. If there is an Internet with a Wi-Fi router in the country. In this case, you just have to purchase a GSM system running through Wi-Fi. You can receive information about the temperature and control it you can via a PC program or a mobile application on your smartphone.
2. If there is no Wi-Fi in the country. In this situation, the use of a conventional SIM card in the GSM system will be the way out. There are a large number of manufacturers of this equipment on the market, and our company is ready to offer you the best options.

What is a GSM thermostat?

The base device GSM system is to which one can connect different sensors (, water leaks, gas leaks, smoke detectors, and others), including.

Modern GSM thermostats, improved by additional software functions, equipped with relays are equipment for a full control of the temperature of heating boilers.

How does the GSM thermostat work?

The program based on the work of the GSM thermostat allows:

1. Lay out the temperature thresholds (lower and top) and receive SMS messages or voice alerts through the incoming call if the temperature has been out of these values.
2. Call the control module and receive voice information about the temperature from each thermometer connected to the block, or send an SMS command and receive information about the dacha temperature in the form of SMS messages.
3. Program alert feature: for example, to obtain an SMS message with information about temperature in a smart home and beyond several times a day at a certain time.
4. Install a certain temperature in interior premises At home and change it through a call or SMS messages to the right moment (for example, half an hour before your arrival at the cottage).

The principle of operation of all GSM thermostats is the same. Only parts can differ (controller and chips) depending on the manufacturer's company. We can connect water leak functions, security with video and photo scan for minimum money. Subsequently, it will be possible to expand the functionality as needed (the principle of the designer).

What is a modular control system?

The technical component of the operation of the GSM thermostat is provided by the modular system, since external controlled devices (modules) can be quite a lot: heating boiler, electrical heaters, security alarm etc.

In fact, the GSM heating control system is a specialized controller, correlated with external sensors and having the ability to change the operating modes of the heating boiler.

The GS module for temperature control can operate in four modes:

1. manual. When the system is controlled by SMS messages or calls, with which the user exhibits one or another temperature mode.
2. Automatic. When on signals from external sensors, the controller supports the temperature modes installed by the user. At the same time, you can change the automatic mode settings at any time.
3. Control mode. When the system sends an Alarm SMS to the User: Slide, gas leakage, critical temperature values, etc.
4. mode on schedule for a week. With the possibility of setting the temperature at certain hours and certain days of the week.

What is the GSM module to choose?

The main selection criterion - the module must perform the necessary functions for you:

at the same time maintain the required amount of thermal sensors (three, five, ten - on your choice);
communicate through calls or SMS messages (as convenient);
optimally approaching your boiler model (our experts will help to understand this problem).

The main advantages of GSM heating control systems:

round-the-clock and efficient temperature control in a smart home or dacha;
convenient remote control via a mobile application or using SMS messages;
extensibility due to additional modules;
ease of setting and installation;
low cost;
lack of subscription fees.

Do you want the optimal temperature regime in your country house in the winter months? Our specialists will help you choose, install and configure the most modern and reliable. Contact us by phone or through.

Do you have a country house, and are you interested in efficient control of temperature parameters? It turns out that currently there are somewhat more or less effective waysThrough which the temperature in the country can be controlled.

The ability to control the temperature in a country house guarantees a number of significant advantages that we will tell in this article. Well, of course, we will consider the most relevant technology to date, allowing such results to achieve such results.

What is the purpose of the remote control systems of temperature parameters

By setting special equipment by which the temperature for the cottage will be adjusted, it will be possible to achieve the following results:

Ensuring comfortable parameters of moisture content in the air (moisture content is the ratio of temperature and humidity indoor).
Ensuring greater duration of the operational resource of the construction site.
It is no secret that sudden temperature drops and excessive humidity in the cold season is the priority cause of frequent cosmetic and rehabilitation repair. The operational adjustment of the temperature indicators allows to prevent the appearance of mold on the walls and extend the operating deadlines without the need for repair work.
Ensuring the rational spending of energy resources and, as a result, saving money.
In order to provide optimal parameters of moisture content in the air, you can install a gas boiler or electrical heater and exploit them without a break during the cold season. But, as a result, the account for consumed electricity or gas will be impressive.
You can do otherwise and apply the system in conditions of a country house, which will include air heating precisely when it is necessary. As a result, the consumption of energy resources will decrease at times, which will save a certain amount of money.
Ensuring the safety of the construction object.
As already mentioned, you can apply continuous round-the-clock heating, even when you are not at home. But, on the one hand it is not suiced, and on the other hand, it is unsafe, since the heating equipment operated in the absence of a person can represent a potential danger.
Otherwise, the situation is when you receive reliable data on the room temperature at a distance and, if necessary, you can adjust this data to the direction of increasing or decreasing.

So, now we know what advantages guarantees remote temperature control. It remains to consider technologies on the basis of which this control is carried out.

GSM-based technology

Provide effective control of temperature parameters in the room, you can apply GSM thermometer for cottages and special temperature sensors. The use of such technology is a relatively new development that is becoming increasingly distributed, both in our country and abroad.

Using modern GSM systems, you can not only get real information about the room temperature, but also remotely control these parameters, bringing them to the desired value.

The functioning of the remote control system is as follows:

User system by means of an SMS channel cellular communication GSM receives information about the values \u200b\u200bof controlled parameters and, if necessary, via the message sends the control command.
A system consisting of GSM thermometers and alarm sensors, sets optimal temperature parameters from the user's point of view and supports them during the time of the specified time.

Remote temperature control is a progressive technology that is actively used in modern systems "Smart House".

Important: Mandatory condition For the effective functioning of the GSM - the thermometer is a stable power supply.
If the supply of electricity is carried out with interruptions, you will need to buy or rent a diesel generator for giving.

At the moment, the following GSM-thermometers are presented on the market:

modifications with an integrated thermal converter;
modifications with the external location of the thermal converter.

How GSM works - thermometer

The device is powered by remote or integrated battery case. Thus, the device operates effectively until the battery is discharged. After that, the battery in automatic mode begins to charge through the power supply.
Setting the device parameters is carried out with your own hands via PC via USB connector.
Depending on the brand and model of the device, it is allowed to work with one or another number of telephone numbers required to send messages.
Phone numbers from which the sensor setting is allowed are defined both when setting up using PCs and when configuring from the phone.
Depending on the modification and model, the device may provide an economical power consumption mode.in which the device functions from an internal battery for more than a month.
GSM - The thermometer comes with a user with specialized software that simplifies the use of the system.

Features of the application of remote thermostats

Thermal regulators of this type are set at a certain distance from heating equipment. The thermostat is set to the desired temperature, and the heating device starts working in this mode so that the specified parameters are constant with minimal deviations.

In the photo - a stylish thermostat that will decorate any room

The thermostat is controlled by the keys to duplicate controls on the heating device. The device is equipped with a digital display, which shows the indoor air temperature.

The advantage of this solution is that the price of a remote thermostat is an order of magnitude more accessible to the cost of GSM - thermometer. At the same time, through the thermostat, you can specify the parameters of the heating equipment for a few days ahead.

A significant disadvantage of such devices is the impossibility of a user alert at a distance of problems and failures in the work of heating equipment.

Important: The use of a special thermostat allows to provide optimal temperature parameters within a separate room or several adjacent rooms.
In this case, energy consumption becomes more economical, and the resource of heating equipment is longer.

If any questions remain and need more useful information, Watch the video in this article.

Excellent article 0.